[Q] my phone stoped on motorola boot menu - Defy Q&A, Help & Troubleshooting

Hello
I chenged my room with sbf file from RSD light and my defy+ stop on motola logo in boot menu
I try 7-8 another sbf file but in all of them stop on boot menu
Thanks for your help

Did you tried to remove the battery and put it again after 5 minutes ?

predaemil said:
Did you tried to remove the battery and put it again after 5 minutes ?
Click to expand...
Click to collapse
yes but not work,stop on motorola logo

My problem solve
Tanks from "riobenny" user for this help:
remove ur battery.
then, u must turn on ur phone by pressing power button, and volume down. hold those two button, till u find android puppet logo, and a triangle.
if previously u run eclair ---> touch the bottom screen, choose wipe data/ factory reset, and choose wipe cache. (navigation entirely using touch screen)
if previously u run froyo ---> press vol up and vol down together, choose wipe data/ factory reset, and choose wipe cache (the navigation is using vol key, to choose using power button)
after u wipe all data and cache, press REBOOT system.
but.... IMMEDIATELY after u press REBOOT, u must press vol up buttong and HOLD for around 6 seconds and then release.
after that, ur screen will show boatloader mode, and u can flash it again using FULL SBF froyo for fresh one.

esfahan_boy said:
My problem solve
Tanks from "riobenny" user for this help:
remove ur battery.
then, u must turn on ur phone by pressing power button, and volume down. hold those two button, till u find android puppet logo, and a triangle.
if previously u run eclair ---> touch the bottom screen, choose wipe data/ factory reset, and choose wipe cache. (navigation entirely using touch screen)
if previously u run froyo ---> press vol up and vol down together, choose wipe data/ factory reset, and choose wipe cache (the navigation is using vol key, to choose using power button)
after u wipe all data and cache, press REBOOT system.
but.... IMMEDIATELY after u press REBOOT, u must press vol up buttong and HOLD for around 6 seconds and then release.
after that, ur screen will show boatloader mode, and u can flash it again using FULL SBF froyo for fresh one.
Click to expand...
Click to collapse
I am glad that you fixed it. Another Defy is reborn.:good:

Related

[Q] Factory update then no screen?

I did a factory update on a friends phone and everything went well. Then when it got to the lock screen it was blank. The bar at top displays well, but the rest of the screen is just black. I have let it sit for a bit and still nothing. I also cycled power a few times to no avail. Any help would be appreciated. Thank you.
O-o very wierd indeed...i'd say -> send for repair
Sent from my 1Ghz CM7 Defy
if you are ok with loosing data then do this...
switch off mobile.
press vol - button and then power on with vol - pressed.
you will see a triangle and exclaimation mark.
then press vol - and vol + together
then wipe data
then wipe cache
reboot.
how this solves the problem.
iif not then you flash using rsdlite a officially full sbf of your region... 2.2.2 froyo

[Q] Motoblur reset

My mom bought a used Moto Bravo and inserted her sim in it for it to say "SIM card is removed or changed. Log in to your MOTOBLUR account to unlock". She doesn't have one and does anyone know how to bypass or erase the current one?
What you should do is a factory reset which will delete all accounts and reset settings to stock as if the phone were new (also will delete any apps you've downloaded)
1. Power the phone off
2. Once off, Press the power button and volume down keys at the same time until you see the M logo and continue holding the volume down button.
2. You should now see a little android and exclamation point, release the button... now press both volume buttons at the same
time.
3. Now you should be in a small menu, scroll down using the volume keys and select the factory reset option using the power button, confirm and let it do its thing without interrupting it.
4. Once it says its complete you should now do the same thing only wipe the cache, it might say cache partition I can't remember
5. Once that's done you can now select the option to reboot your phone. (It may take a while on this first boot up)
You should be fine after that... post if you have results or issues.
*Im not responsible if you mess your phone up.
Sent from my MB520 using XDA App

ZTE Blade 2 GEN stuck on android logo after flashing. Hardware buttons aren't working

Hey guyz,
Could you help me please? I have ZTE Blade TFT phone with 2 gen ROM.
Unfortunatly hardware buttons are not working and can't be repaired. After flashing new ROM my phone is stuck on Android logo.
I have CWM installed, but unfortunatly I can't perform hard reset due the broken buttons.
I can't reflash it via other method as well, cause factory recovery is replaced by CWM.
I can't use a TPT method as menu button is not working as well.
Could you please recommend me any method to recover my phone?
Any feedback is welcome!
Kostiantyn
Lightingrain said:
Hey guyz,
Could you help me please? I have ZTE Blade TFT phone with 2 gen ROM.
Unfortunatly hardware buttons are not working and can't be repaired. After flashing new ROM my phone is stuck on Android logo.
I have CWM installed, but unfortunatly I can't perform hard reset due the broken buttons.
I can't reflash it via other method as well, cause factory recovery is replaced by CWM.
I can't use a TPT method as menu button is not working as well.
Could you please recommend me any method to recover my phone?
Any feedback is welcome!
Kostiantyn
Click to expand...
Click to collapse
Okay dude keep calm maybe your phone is still alive.
Check:
-Do you can enter FTM Mode?
-When you put the device @ charging , does it show a charging animation?
If so or not , pull out battery out of device for 4-5 hours (!) , then put battery back in and try to go in recovery! Maybe then it will go ... If you need to put another ROM to device , just 'Mount and Storage" -> "Mount USB Storage" -> connect phone via USB to Computer and you are able to put another ROM to sdcard.
When you install new ROM
-2x Wipe Data&Factory Reset
-2x Wipe Cache
-2x Wipe Dalvik (under 'Advanced')
-Not needed but you can Wipe Battery Stats
-Install .zip from sdcard
-choose .zip from sdcard
-choose ROM , install and reboot.
I hope it helped!
UnlimitedRom said:
Okay dude keep calm maybe your phone is still alive.
Check:
-Do you can enter FTM Mode?
-When you put the device @ charging , does it show a charging animation?
If so or not , pull out battery out of device for 4-5 hours (!) , then put battery back in and try to go in recovery! Maybe then it will go ... If you need to put another ROM to device , just 'Mount and Storage" -> "Mount USB Storage" -> connect phone via USB to Computer and you are able to put another ROM to sdcard.
When you install new ROM
-2x Wipe Data&Factory Reset
-2x Wipe Cache
-2x Wipe Dalvik (under 'Advanced')
-Not needed but you can Wipe Battery Stats
-Install .zip from sdcard
-choose .zip from sdcard
-choose ROM , install and reboot.
I hope it helped!
Click to expand...
Click to collapse
Hi,
Thanks for assistance! Recovery is already installed. I'm not able to wipe data and cache due broken hardware buttons. Still don't have solution.
Flash this via Fastboot
This recovery is CWM touch recovery for Zte Blade. Name it 'recovery.img' and fastboot it.
UnlimitedRom said:
Flash this via Fastboot[/URL]
This recovery is CWM touch recovery for Zte Blade. Name it 'recovery.img' and fastboot it.
Click to expand...
Click to collapse
Thanks for advice.
This methods doesn't work for me as well. It progresses beyond the green android and load ROM logo.
Turn on your phone with volume up held and connect it to your computer. It should not progress beyond the green android. Sometimes you have to wait a few minutes for
Click to expand...
Click to collapse
Lightingrain said:
Thanks for advice.
This methods doesn't work for me as well. It progresses beyond the green android and load ROM logo.
Click to expand...
Click to collapse
To get in fastboot you have to hold the vol up key for around second and then press power on while holding vol up. I mean you shouldn't hold the two buttons at same time to power up.
1. Hold Vol Up key
2.While holding vol up , wait 3 seconds
3 While holding vol up , press power on now. At least you hold two buttons.
4.You should now be in fastboot mode.
.
UnlimitedRom said:
To get in fastboot you have to hold the vol up key for around second and then press power on while holding vol up. I mean you shouldn't hold the two buttons at same time to power up.
1. Hold Vol Up key
2.While holding vol up , wait 3 seconds
3 While holding vol up , press power on now. At least you hold two buttons.
4.You should now be in fastboot mode.
Click to expand...
Click to collapse
It doesn't work for me. I tried several times. ROM logo appeared after android one
Lightingrain said:
It doesn't work for me. I tried several times. ROM logo appeared after android one
Click to expand...
Click to collapse
Do you can enter bootloader mode?
kevinrus123 said:
Do you can enter bootloader mode?
Click to expand...
Click to collapse
Unfortunately, I can't.
I can access only CWM mode

S4 not booting :/

my mobile phone refuses to boot and gives me a wierd battery sign that keeps coming on and off every 10 secs
Go to recovery by holding volume up + home key + power button
Scroll by volume keys
Then wipe data/factory reset & wipe cache
Then reboot
If nothing did happen you may need to flash new firmware

[Q] Nexus 10 Stuck in bootloop

I have read the other threads who had the same issue. But their Nexus 10 was in unlocked state.
Here is what happened,
1. I updated the Android OS version, since I didnt do for long time.
2. Along with that it updated some other Apps.
3. When it rebooted, it gets stuck at "4 color circle animation"
4. I cant reset to factory settings either. never gets into factory reset screen. I think this is because it was in "locked state" (I had set a lock password).
How do I factory set, is there a way at all?
Probably no factory reset needed. What you need to do:
1. Hold vol up+down+power.
2. Select in the menu (this is the bootloader/fastboot) recovery by using the volume keys. Then press the power button.
3. Once in the recovery you need to hold both volume keys immideatly (it was something like that. If it doesnt work google a bit).
4. Choose wipe cache and confirm with the power button.
5. Select reboot and confirm with power button.
6. Cross fingers.
7. If it doesnt work you need to do a factory reset in the recovery but youll lose your data.
Sent from my Galaxy Nexus using XDA Free mobile app
mrgnex said:
Probably no factory reset needed. What you need to do:
1. Hold vol up+down+power.
2. Select in the menu (this is the bootloader/fastboot) recovery by using the volume keys. Then press the power button.
3. Once in the recovery you need to hold both volume keys immideatly (it was something like that. If it doesnt work google a bit).
4. Choose wipe cache and confirm with the power button.
5. Select reboot and confirm with power button.
6. Cross fingers.
7. If it doesnt work you need to do a factory reset in the recovery but youll lose your data.
Sent from my Galaxy Nexus using XDA Free mobile app
Click to expand...
Click to collapse
Thank you sir, I had to do factory reset and now I am back on. Anyways I lost everything since I dont remember what I lost its ok with me.
Ignorance is bliss!

Categories

Resources