Related
Hi,
hopefully anyone has an answer to the strange bluetooth behaviour of my X1.
The first device is a bluetooth headset from Sony. It works good, if bluetooth is activated. But after some time of not using the headset, the phone just switches off bluetooth. Sometimes after a few minutes, sometimes days after my last use of the headset. I tried all settings of the bluetooth-settings with no change. And it sucks if with the next phone call the headset cannot connect anymore because bluetooth was switched off.
The second device is a GNS TrafficBox Plus FM9BT-Y. Somehow MN7 does not detect the device directly, so I have to use the workaround with the serial port and outgoing connection on COM1.
The initial minutes the connection works fine, but then stops and is not restored.
Here as well trying different settings changed nothing.
How can I find out the address of the bluetooth devices?
Is there a tool to further test bluetooth connections (like what speed can be used, the address of the device, etc)
Regards
pt
Im using Itjes Touch 7 final & i have the same problem - infact i've had it with the last 3 of his roms with my blutooth to SEAT car. I'll be on a call in my car & it switches the blutooth off without warning. generally after about 10 minutes of actual call time. But it doesnt disconnect unless during a call ? There is no rhyme or reason to it, it just sometimes happens?
So any further info will be appreciated
Im using Itjes Touch 7 final & i have the same problem - infact i've had it with the last 3 of his roms with my blutooth to SEAT car. I'll be on a call in my car & it switches the blutooth off without warning. generally after about 10 minutes of actual call time. But it doesnt disconnect unless during a call ? There is no rhyme or reason to it, it just sometimes happens?
So any further info will be appreciated
I have Ra2generic DE with the 1.10 radio ROM on it.
At the beginning it was fantastic not having the bluetooth issue. Everything was working so extremely goood... no switching off, no disconnecting of and from the bt headset,, etc...
After a while the issue was here again...damn! So the bt became not very useful in its functionalities.... then I saw that it was not possible to see through my bt freespeech device in the car the last calls on the phone... hm, ok I said. There were lot of calls (incoming, outgoing, missed, etc) on the list...I erased them all...
Now it is working in a perfect way.... no disconnecting, no switching off..and this with the stock ROM and Radio ROM.
I tried it a few months before posting it here... now I'm cleaning up my calling list every 2nd day (I really call a lot) and I have no problems..
Hope it works for you..
i have the same problem, the bluetooth disconect without any reason, i have tried more than 10 Roms and i dont have any solution
¿is so dificult for Sony to repare this problem?
zagito said:
There were lot of calls (incoming, outgoing, missed, etc) on the list...I erased them all...
Now it is working in a perfect way.... no disconnecting, no switching off..and this with the stock ROM and Radio ROM.
I tried it a few months before posting it here... now I'm cleaning up my calling list every 2nd day (I really call a lot) and I have no problems..
Hope it works for you..
Click to expand...
Click to collapse
I hardreseted the device, installed the newest official firmware, deleted the calling list and with great expectations checked bluetooth behaviour.....nothing changed for me
But great it works for you and thanks for the tip
Come on people..... please someone help us with this
Bluetooth with clarion mind
Am having trouble connecting with my new Clarion MIND - is seems the phone does not see the profiles (very similar to the phone adding the older SE Bluetooth Watch, the 100). Has anyone built a .cab to sort this out?
There are a lot of problems with carkit connections & the HD2.
I tried several things to get it working without success.
When I try to connect to the JVC KD-AVX44 it connects but give no sound at all. (making 2 connections, handsfree & stereo audio)
Then I tried the registry tweak mentioned into this forum and had success once. I was very happy because also the title track was shown onto the JVC display and also the phone was functioning ok both ways.
The sound trough AD2P was perfect. Only one time.
After that i get a lot of disconnects.
Then I tried to make only connection with the phone function and this is working ok now. When I want to make the connection trough AD2P then the problem is back. Also when you make it without making the phone connection
So I think the problem lies into the stereo connection. For instance when you skip a track onto the JVC then the connection will be lost and reconect again and giving 2 seconds of sound and then it's quiet again.
Also when to 2 connections exists the phone is blocked by incomming calls because it's thinking it's connected so the earpiece & mic are dead at that time. And also the radio.
Did you try the LineSpeed setting to 256 in the AV key of the Widcomm registry settings ?
Don't know if it could help in your case but it did for me, I don't have disconnects with my Sony headphones anymore and sound is better.
Bluetooth
Ok thx I will give it a try and post the results.
which registry tweak did you applied first, cause i too keep having issues...?
tweak
Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys
Add the DWORD setting COD=5374476
This makes devices see the HD2 as a 'Normal' phone
Do I have to add this line somewhere? I found the AV key into widcomm but the line was not there
valos said:
After that i get a lot of disconnects.
Click to expand...
Click to collapse
Try turning WiFi off on the phone, it makes a big difference on my IO Play system.
valos said:
Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys
Add the DWORD setting COD=5374476
This makes devices see the HD2 as a 'Normal' phone
Click to expand...
Click to collapse
Ok i make this in my BMW X5 and one of problems is solved - HD2 working correct when i am on call and power the car, but i have another problem - after 5 - 6 min on call Bluetooth connections is droped and i can't lisen nothing from Car or for Phone - i must to press Menu and switch off Hands free to continue conversation.
Ok but are you also making stereo connection. I only have the handsfree conected at this time and then the connection is stable. Only with the A2DP it goes wrong.
valos said:
Do I have to add this line somewhere? I found the AV key into widcomm but the line was not there
Click to expand...
Click to collapse
Yes, you have to add the key, sorry not have said that.
kmeta said:
Ok i make this in my BMW X5 and one of problems is solved - HD2 working correct when i am on call and power the car, but i have another problem - after 5 - 6 min on call Bluetooth connections is droped and i can't lisen nothing from Car or for Phone - i must to press Menu and switch off Hands free to continue conversation.
Click to expand...
Click to collapse
Strange, so far I didn't experience any disconnection.
I have conversations during more than 20 minutes daily and line quality is far better than with my Diamond, with no drops.
With the Diamond I had the BT stopping regularily on the phone, it was very annoying because I always discovered it when receiving a call and not being able to answer.
So far it didn't happen on the HD2, but it is really too soon to jump to any conclusion.
I don't use A2DP in the car as I didn't order the option, which I viewed as useless because the hard disk capacity of the iDrive is sufficient to hold a good collection, the audio quality and functionality is much better and I can still connect the phone to the USB plug as mass storage if I want to play or transfer something from it or any memory stick or external HD.
So maybe not having the A2DP profile active may help also.
I also not any problem with my old HTD HD and Cruize ... but with HD2 i have this issue.
Today i receive answer of my ticket from HTC: they offer me to contact with BMW and to ask them why they not support HD2 ... I think this is stupid becouse every new device must support old protocols and older devices.
Now the choice is to change Car or Phone ... sorry but HD2 not have any chance to survive.
kmeta said:
I also not any problem with my old HTD HD and Cruize ... but with HD2 i have this issue.
Today i receive answer of my ticket from HTC: they offer me to contact with BMW and to ask them why they not support HD2 ... I think this is stupid becouse every new device must support old protocols and older devices.
Now the choice is to change Car or Phone ... sorry but HD2 not have any chance to survive.
Click to expand...
Click to collapse
Yes how lousy is that
Got the same answer first, but they realised that BMW coudn't recall thousands of vehicles to do a BT upgrade just because HTC decided to adopt the crapy Widcomm BT stack.
So they say they are working on a fix, but given how many issues there are with this stack, they better switch back to the old MS stack instead.
To be clear, it is the Widcomm stack at fault here, not BMW. Every single phone not equipped with this stack, I could try on the BMW, worked flawlesly.
I hope they will recognise this officialy and not blame the others each time a customer opens a ticket about these flaws.
In the meantime, the registry hack works perfectly for handsfree profile, but it seems it doesn't fix everything when the A2DP profile is activated.
MacGyver4321 said:
Yes how lousy is that
Got the same answer first, but they realised that BMW coudn't recall thousands of vehicles to do a BT upgrade just because HTC decided to adopt the crapy Widcomm BT stack.
So they say they are working on a fix, but given how many issues there are with this stack, they better switch back to the old MS stack instead.
To be clear, it is the Widcomm stack at fault here, not BMW. Every single phone not equipped with this stack, I could try on the BMW, worked flawlesly.
I hope they will recognise this officialy and not blame the others each time a customer opens a ticket about these flaws.
In the meantime, the registry hack works perfectly for handsfree profile, but it seems it doesn't fix everything when the A2DP profile is activated.
Click to expand...
Click to collapse
After much playing around - I found a linespeed of 300 works best for the HD2. 256 still has questionable quality and 320 for some reason skips a lot. Reducing it to 300 seems to be a workable equilibrium!
Hello everybody!
A couple of days before i've bought HD2 (russian, 1.48 FW is flashed by default). Before buying i've tested it for mentioned here bugs with display - none has been found.
Device is really fast, much faster then my Samsung i900. The only one problem is present - bad co-work with bluetooth handsfree Jabra BT530. This has been tested with i900, K750i, iPhone - everything was OK. HD2 has really big problem with it - on any sound event small part in start is missing, it seems BT is connecting with handsfree and this time is skipped.
Using navigation soft is unreal in this case: we can hear just "....eft", "....meters" and so on. But if pause between sound events is smaller than ~5 sec no skipping occurs. Tried to play with WIDCOMM registry tree - no effect, modifying values without right manual is like a "russian roulete".
So, do we have any fix for this bug?
P.S. Sorry for my english.
I've just received answer from HTC. They say (translated):
HTC HD2 hasnt been tested to work with JABRA BT530, so we cant say that phone isn't functioning wrong. Use original HTC hansfree.
This is support for top device with price more than 1000$!!!
Th HD2 is my 4th WM phone on all my previous WM Phones I ran a mortscript which I wrote to transfer all the system sounds over to my bluetooth car kit when it detected the kit...the script looked for the change in a registry key:-
> HKLM\System\State\Hardware\Handsfree
and then activated the BTAudioOn program...
Now this just does not work on the HD2! neither the registry change nor the Audio transfer - the sound still comes out of the phone speaker!!
I have read that a different Bluetooth stack is used on the HD2 (Widcomm)..
So does anyone know:-
1] Which registry key changes when a handsfree kit is detected?
2] A program that will transfer the sound to the Bluetooth device on the HD2?
Thanks...
Which ROM are you running ? On my NRG ROM which is a 1.66 based one i have the option in the BT settings under advanced to play system sounds on remote hands free device .
Comm Manager -> BT -> Settings -> Advanced -> Audio
Never checked on a pre 1.66 ROM if this option existed ..
I have a stock O2 version with 1.43 ROM, yes I found that option and turned it on but it doesn't work! I read somewhere that it only works for stereo devices? But def not working on mine :-(
anyone???????????????
dino_Donis said:
anyone???????????????
Click to expand...
Click to collapse
Works fine for me on my Jawbone 2 BT headset .. I can listen to music over it no probs (albeit poor quality) .. Maybe upgrade to a 1.66 rom and see how you go with that..
Is it safe to upgrade a stock O2 HD2 to this version? What else will I gain? Is sense much different?
Can someone confirm that this Bluetooth issue will be fixed if I upgrade my ROM to 1.66 WWE. I have an o2 phone which currently has 1.43 on it.
When the phone rings the sounds gets re-directed to my Plantronics M3000 headset/Nokia CK-7W car kit fine...but the Play all system Sounds through Bluetooth device feature doesn't work...I can hear extra hiss through the bluetooth device like it is switching on but the sound still comes out of the phone speaker....
Hello buddies,
this thread is about some strange behavior of bluetooth with current energy roms. details follow...
why a new thread?
I decided to start a new thread, because it leads to nothing to discussing this topic in the main thread ... found some people who shares my sorrow, never the less there was a lot of users who hit the answer button on page 1 and report "problem xy" or "hell yeah what a nice rom"
what is the problem?
I'm not able to pair my TouchHD with my car's Hands Free system. A2DP works fine, but when I turn on the Radio Unit a small blue headphone symbol blinks in the statusbar of the phone - no pairing succeeds. If I switch to BT audio, a black headphone symbol stays resident and the media player opens for playback, so A2DP works. Installing SIM access profile on roms without built in rSAP or other various tools in addition doesn't make it work. [see "what have been done" section!]
Just used the latest MIRI-Roms (discontinued) and it works like a charm for me. After initial setup, Hands Free (version 1.5) and Wireless Stereo where installed and activated - Serial Port left out unchecked. Then a popup message informs me, that a BT-Device is trying to access phones phonebook remotly - all went fine.
as reported by other users, this behavior occurs since ~may versions of energy roms...
about the environment
Using energy's rom on TouchHD [Blackstone] T8282 [BLAC100 32M]
flashing with USPL
phone's SPL: stock SPL-1.54.0000
radio: 1.12.25.16D3 - don't see a reason to update
protocoll: 52.60.25.33U
carrier: O2 GERMAN
what have been done so far?
I've tested the pairing of my device in various cars
tested with my Renault Megane 3 integrated car kit (arkamys audio / parrot)
tested with a 2010 Toyota Prius car kit
tested with a subaru 2010 car kit
tested with Blaupunkt Toronto 400 BT head unit by phitsc
I've tried programs, suggested by the xda community
installed Bluetooth_SAP_Profile.CAB
installed BT_SAP.cab
installed Gooru_Sense_BT_A2DP_Fix_Cab_by_JVH3.CAB
installed HeadsetFix.cab
installed JetBTHFExt_1.40.CAB
reg-tweaks on "HKLM\Software\Microsoft\Obex\ObexServiceMask"
roms tried
Miri_WM65_21891_Premium_Manila_2.5_V20.0_NoHtcMessaging.rar
Miri_WM65_21893_Premium_Manila_2.5_REV22.0.rar
Energy.BLACKSTONE.23563.Sense2.5.Cookie.HomeTab.Apr.23.7z
Energy.BLACKSTONE.23566.Sense2.5.Cookie.HomeTab.May.01.7z
Energy.BLACKSTONE.23569.Sense2.5.Cookie.May.16.7z
Energy.BLACKSTONE.21903.Sense2.5.Cookie.May.16.7z
HD_Miri_6.5.X_23541_SENSE25.rar
Miri_WM65_21893_V38.0_Premium.rar
Energy.BLACKSTONE.23569.Sense2.5.Cookie.May.22.7z
(green indicates a working rom)
dear community...
please use this thread wisely for recommendations or suggestions on this topic. keep this thread a productive discussion. if you have a contact to NRGZ, feel free to report this thread, cause my afford to reach him fails.
So I hope we can figure out, why it does'nt work as it should to...
kindly regards, FS
Hi,
I have the same problem with my Touch Pro and my Megane 3.
I have to switch back to an older version of the rom then..
Hi,
I'm using Energy ROM Titanium 18may.
Radio 1.17.xxxx
No problem here with BT of my car stereo.
I had this problem untill I delete the old pairing on the car BT.
After this, the phone pair great
firespawn said:
Hello buddies,
this thread is about some strange behavior of bluetooth with current energy roms. details follow...
why a new thread?
I decided to start a new thread, because it leads to nothing to discussing this topic in the main thread ... found some people who shares my sorrow, never the less there was a lot of users who hit the answer button on page 1 and report "problem xy" or "hell yeah what a nice rom"
what is the problem?
I'm not able to pair my TouchHD with my car's Hands Free system. A2DP works fine, but when I turn on the Radio Unit a small blue headphone symbol blinks in the statusbar of the phone - no pairing succeeds. If I switch to BT audio, a black headphone symbol stays resident and the media player opens for playback, so A2DP works. Installing SIM access profile on roms without built in rSAP or other various tools in addition doesn't make it work. [see "what have been done" section!]
Just used the latest MIRI-Roms (discontinued) and it works like a charm for me. After initial setup, Hands Free (version 1.5) and Wireless Stereo where installed and activated - Serial Port left out unchecked. Then a popup message informs me, that a BT-Device is trying to access phones phonebook remotly - all went fine.
as reported by other users, this behavior occurs since ~may versions of energy roms...
about the environment
Using energy's rom on TouchHD [Blackstone] T8282 [BLAC100 32M]
flashing with USPL
phone's SPL: stock SPL-1.54.0000
radio: 1.12.25.16D3 - don't see a reason to update
protocoll: 52.60.25.33U
carrier: O2 GERMAN
what have been done so far?
I've tested the pairing of my device in various cars
tested with my Renault Megane 3 integrated car kit (arkamys audio / parrot)
tested with a 2010 Toyota Prius car kit
tested with a subaru 2010 car kit
tested with Blaupunkt Toronto 400 BT head unit by phitsc
I've tried programs, suggested by the xda community
installed Bluetooth_SAP_Profile.CAB
installed BT_SAP.cab
installed Gooru_Sense_BT_A2DP_Fix_Cab_by_JVH3.CAB
installed HeadsetFix.cab
installed JetBTHFExt_1.40.CAB
reg-tweaks on "HKLM\Software\Microsoft\Obex\ObexServiceMask"
roms tried
Miri_WM65_21891_Premium_Manila_2.5_V20.0_NoHtcMessaging.rar
Miri_WM65_21893_Premium_Manila_2.5_REV22.0.rar
Energy.BLACKSTONE.23563.Sense2.5.Cookie.HomeTab.Apr.23.7z
Energy.BLACKSTONE.23566.Sense2.5.Cookie.HomeTab.May.01.7z
Energy.BLACKSTONE.23569.Sense2.5.Cookie.May.16.7z
Energy.BLACKSTONE.21903.Sense2.5.Cookie.May.16.7z
HD_Miri_6.5.X_23541_SENSE25.rar
Miri_WM65_21893_V38.0_Premium.rar
Energy.BLACKSTONE.23569.Sense2.5.Cookie.May.22.7z
(green indicates a working rom)
dear community...
please use this thread wisely for recommendations or suggestions on this topic. keep this thread a productive discussion. if you have a contact to NRGZ, feel free to report this thread, cause my afford to reach him fails.
So I hope we can figure out, why it does'nt work as it should to...
kindly regards, FS
Click to expand...
Click to collapse
Mine works fine without any cab fix.. your pda must search 4 a car kit as a bleutotth headset! comm manager /bluetooth/ set up BT headset turn your cars BT on and there you go!! i tell yo the energy roms work fine 4 me
+ 1 here
Don-Maco said:
Mine works fine without any cab fix.. your pda must search 4 a car kit as a bleutotth headset! comm manager /bluetooth/ set up BT headset turn your cars BT on and there you go!! i tell yo the energy roms work fine 4 me
Click to expand...
Click to collapse
sorry dude, not much help but i have the same experience; all energy roms (and i do mean all of them) work perfectly with my parot CK3100 but then i do task 29 before every flash & hard reset a few times after initial setup.
in addition, i also flash the latest stock rom from htc every so often.
i know this seems a bit ott but i rarely seem to suffer the buggy issues that many others do.
hope you get it sorted
It is not about Task 29.
I had problems with access through the original multi-functional touch panel in the Ford Mondeo. When I went to CLEAN ROM, all troubles are gone. The problem is that you must agree with access on the phone. This question is not on Energy ROMs displayed. I can pair phone but can not be used for handsfree calling.
Now I have a CLEAN ROM and everything is bugfree.
To be honest, no ROM to date consistently works with the in-car bluetooth kit in our Zafira. It works flawlessly with my old phone (K800i) and my wife's phone (W950i) but it's just not stable for the HD.
If it works, it'll drop the bluetooth connection after about 15mins. It's as if there is a time-out, but I've hunted the registry and both HD Tweak and Adv. Config for anything related to this but with no joy.
My current ROM seems to be about the best so far (kwbr's WM6.5 and Manila 2.1) but it still drops the connection randomly yet other times it may keep the connection for over an hour no problems.
Seems very very strange to me, but from what I've read, it's a common issue with the bluetooth kits in GM's euro cars (Vauxhall, Saab, Chevrolet etc.)
|WWE|BLACKSTONE|¯`·.¸¸.- Energy -.¸¸.·´¯ |BlueTooth CarKit ISSUE|`·.¸¸.·´¯`·.¸¸.·´¯)
@DaRulah
what kind of rilphone / radio rom do you use - pointing my research in this direction, may that's the reason... does bluetooth depends on the used radio rom?
@raistlin74 / @Don-Maco
tried all ways possible
car to phone
htc comm mgr to car
windows BT settings to car
@superseagull
having the latest carrier rom flashed before (comes with SPL 1.54 to enable flashing of 6.5+ roms)
what kind of rilphone / radio rom do you use? [EDIT: saw it in your signature ]
@malson
well, sounds logic ... the pairing won't succeed cause the phone's dialog to allow access doesn't appear. will try it with energy's titanium rom. never the less, the outdated MIRI roms /w sense 2.5 and windows mobile 6.5 works for me
@jonifen
as mentioned, the phone is compatible with my car - in basic. simply doesn't work with energy roms.
therefore I tried it with various other systems to exclude a mismatch with my car kit
well, thanks for you participation so far - may we get the clue with my problem
regards - FS
2 options?
Why only two options yes and yes? Why not a no option in the poll? I don't have a problem with nrg roms.
firespawn said:
@DaRulah
what kind of rilphone / radio rom do you use - pointing my research in this direction, may that's the reason... does bluetooth depends on the used radio rom?
Click to expand...
Click to collapse
Radio: 1.14.25.35 with the matching rilphone
Rom: Energy.RAPHAEL.23569.Sense2.5.GTX.Themed.May.13
i don't think it's a radio problem since i used that one with older energy roms, and had no problems with my car kit.
no problems here
I tried my phone with a bluetooth carkit in a BMW X5 and found no problems with it. I use latest NRG rom 21905 with CHT and latest Radio (1.17) with Rilphone 1.15. i suggest u upgrade to those as well.
GL
As this is about a genaral pairing problem I don't know if it will help u as u seem to be able to pair but just have Handsfree problems...
But as u didn't mention how u tested out the fixes I will post this here.
Remember i had a problem once when trying to pair my HD.
Base:
- Touch HD with some newer Sense 2.5
- A2DP wasn't working or Windows Mediaplayer hooked A2DP keys
AFTER I tried to fix A2DP problem (installed some "fix" cabs u mentioned above) I wasn't able to pair anymore.
Here is what i figured out:
- To get it working again it didn't help to over-install another fix - don't know why but seems that some fixes do reg changes wich break other ones.
- I had to hard reset the device
- so never try to install 1 fix after another to figure it out
- always do 1 hardreset + 1 fix then hardreset again
- only really good working fix for me was HeadsetFix.cab I posted in NRG thread - many other fixes broke my pairing capability
Now im on:
- actual NRG 2. June MaxSense 23xxx
- HeadsetFix.cab installed (otherwise Windows Mediaplayer pops up or it doesn't work for me)
- haven't had problem with pairing since several month with any NRG Rom (before it wasn't depending on NRG but on Sense 2.5 / but just had A2DP issue - pairing issue just with wrong fixes installed)
Radios I tested were .12 and .14
Tested BT Headsets/Caraudios:
- Motorola HT820
- some Sony MEX BT xxxx Caraudio
BTW for all who are interested in - i always install "AutoA2DP" or "AutoActiveSync" cause A2DP doesn't pair automaticaly in my car - just the Handsfree pairs by default.
Mimic NRG style ROM Thread !!!!!!!!!!!!
eddyve said:
Why only two options yes and yes? Why not a no option in the poll? I don't have a problem with nrg roms.
Click to expand...
Click to collapse
Yes + 1
Why only YES and YES option ...
No problems with any BT. Myy HD conects on any BT device that i have with no problems...
*****************************************************
PS: its not nice to use for your thread title the same format and characters that NRG use for all of his roms !!!!!!!!!!!!
Its a bit confusing for regular users and misleading....
And if i was you i will change the title not to mimic NRG ROM threads !!!!!!!!!!!!!!!!!!!!!!!!!!!!
colossus
|WWE|BLACKSTONE|¯`·.¸¸.- Energy -.¸¸.·´¯ |BlueTooth CarKit ISSUE|`·.¸¸.·´¯`·.¸¸.·´¯)
@eddyve
it is a yes poll (or call it simply a counter), because I want to know how many people have a problem like me
@DaRulah
well, good to know
@TheOne741
updating my radio rom asap, just to confirm that the radio version is not the source of my problem ... I will report on this
@FrEcP
thank you very much for your detailed explaination! I also do hard resets between the fixes. I will try HeadsetFix.cab in combination with AutoA2DP on a clean rom
@colossus_r
do you have anything useful to contribute? stay on topic please!
Well, thank you all so far, I will report my progress when the mentioned tips have finished... regards - FS
mimic NRG ROM thread
firespawn said:
@colossus_r do you have anything useful to contribute? stay on topic please!
Click to expand...
Click to collapse
@firespawn: Whats the matter with you? colossus_r is on the right way. Why only "Yes or Yes" in poll. And whats about mimic NRG ROM threads?
Please choose your own style for this thread.
On topic: No problem with Siemens HKW 720 Bluetooth Car Kit at all. Im using Handsfree-Profile and rSAP-Profile.
Issues with bluetooth ...
aleskow said:
@firespawn: Whats the matter with you? colossus_r is on the right way. Why only "Yes or Yes" in poll. And whats about mimic NRG ROM threads?
Please choose your own style for this thread.
On topic: No problem with Siemens HKW 720 Bluetooth Car Kit at all. Im using Handsfree-Profile and rSAP-Profile.
Click to expand...
Click to collapse
Again, it is used as a counter aaand again: stay on topic and stop cryin' like a baby about the choosen subject! I couldn't change it anymore!!!
Please do not post things like: Oh boy, mine is working fine *smiley*, cause this is worth nothing!
Sorry, I'm a bit frustrated, because a productive research on this problem seems to be impossible...
superseagull said:
sorry dude, not much help but i have the same experience; all energy roms (and i do mean all of them) work perfectly with my parot CK3100 but then i do task 29 before every flash & hard reset a few times after initial setup.
in addition, i also flash the latest stock rom from htc every so often.
i know this seems a bit ott but i rarely seem to suffer the buggy issues that many others do.
hope you get it sorted
Click to expand...
Click to collapse
Right is right i also never had bugs since energy roms march 2010
and the opera 10 never gave issues! so some flashers are doing somthing wrong! when using titanium the rom is superbly fast i also spice things up with the htc-performance.cab.
firespawn said:
Again, it is used as a counter aaand again: stay on topic and stop cryin' like a baby about the choosen subject! I couldn't change it anymore!!!
Please do not post things like: Oh boy, mine is working fine *smiley*, cause this is worth nothing!
Sorry, I'm a bit frustrated, because a productive research on this problem seems to be impossible...
Click to expand...
Click to collapse
We cant do any research if we dont have the problem
i think you should swich the the car bluetooth on and keep it pressed till the device finds it! thats what i did on other cars
or you will have to reset the cars bluetooth as shown in the manual
firespawn said:
@eddyve
it is a yes poll (or call it simply a counter), because I want to know how many people have a problem like me
@DaRulah
well, good to know
@TheOne741
updating my radio rom asap, just to confirm that the radio version is not the source of my problem ... I will report on this
@FrEcP
thank you very much for your detailed explaination! I also do hard resets between the fixes. I will try HeadsetFix.cab in combination with AutoA2DP on a clean rom
@colossus_r
do you have anything useful to contribute? stay on topic please!
Well, thank you all so far, I will report my progress when the mentioned tips have finished... regards - FS
Click to expand...
Click to collapse
set up you bT via comm.manager. dont turn Bt on just choose set up bluetooth hdset device etc/ turn you cars bt on an make shure it is visible etc by keeping the on button pressed in while searching with your gsm and thats it i think thats how it worked 4 me and will work 4 every one too!!!
study your old rom be4 you use a new one and you will know how to recognize the differenzesss amen
I've experienced something similar with my volvo. In my case it paired sometimes and usually in a call it disconnected. This happened with all kind of roms. It all disappeared after a radio update.
Somebody mentioned 1.17... with rillphone 1.15... works like a charm!
Hope it helps
(else you can try to let a mechanic update the bluetooth software in your car)