[Q] [Q} Is my D802 Bricked? - G2 Q&A, Help & Troubleshooting

Hi all
my D802 can't reboot with following method, could you please help me investigate how to fix it?
1. Can't enter download mode: I power it off, then hold volume up and plug in USB, but only the first screen shows up, can't enter the second one:
http://i.imgur.com/Kc4egAZ.jpg
http://i.imgur.com/jdCWBEW.jpg
So I can't flash kdz image.
2.I am able to access TWRP with official factory default( power+volume down to power on, when LG logo shows up, release power and volume down, then hold power.). But no matter I flash CloudyFlex which in my sdcard, or sideload flash others ROM, the cell phone will no boot up, always stuck at LG logo.
Any possible way to fix? Thank you very much.

helleon said:
Hi all
my D802 can't reboot with following method, could you please help me investigate how to fix it?
1. Can't enter download mode: I power it off, then hold volume up and plug in USB, but only the first screen shows up, can't enter the second one:
http://i.imgur.com/Kc4egAZ.jpg
http://i.imgur.com/jdCWBEW.jpg
So I can't flash kdz image.
2.I am able to access TWRP with official factory default( power+volume down to power on, when LG logo shows up, release power and volume down, then hold power.). But no matter I flash CloudyFlex which in my sdcard, or sideload flash others ROM, the cell phone will no boot up, always stuck at LG logo.
Any possible way to fix? Thank you very much.
Click to expand...
Click to collapse
What did you do prior to this happening? We need a story.

CuraeL said:
What did you do prior to this happening? We need a story.
Click to expand...
Click to collapse
not sure, I did few stupid things before.
1. I flashed LG G Pro 2 ROM here: http://forum.xda-developers.com/showthread.php?t=2673143 but it not good for me, so i went to recovery. but this rom replaced my recovery to a unknow one, not TWRP. when I was in this unknow recovery, my phone linked with PC via USB. PC found a lot of unformatted drivers, I did the most stupid thing: formatted one of them.
2. G Pro2 rom still can boot up, I flashed stock kdz, and rooted it with ioroot10, then flashed TWRP 2.6.3.3.
3. copy CloudyFlex_1.4.zip into sdcard through MTP mode of stock rom. reboot into recovery TWRP, flash cloudyflex, phone never boot up again.
4. No matter what rom i flash, always stuck at LG logo and the phone become hot.
sorry for my pool English.

helleon said:
not sure, I did few stupid things before.
1. I flashed LG G Pro 2 ROM here: http://forum.xda-developers.com/showthread.php?t=2673143 but it not good for me, so i went to recovery. but this rom replaced my recovery to a unknow one, not TWRP. when I was in this unknow recovery, my phone linked with PC via USB. PC found a lot of unformatted drivers, I did the most stupid thing: formatted one of them.
2. G Pro2 rom still can boot up, I flashed stock kdz, and rooted it with ioroot10, then flashed TWRP 2.6.3.3.
3. copy CloudyFlex_1.4.zip into sdcard through MTP mode of stock rom. reboot into recovery TWRP, flash cloudyflex, phone never boot up again.
4. No matter what rom i flash, always stuck at LG logo and the phone become hot.
sorry for my pool English.
Click to expand...
Click to collapse
Sorry man, I have no idea what you may have formatted then.. :/
I can't think of anything right now.. If you can't get to download mode and flash stock kdz again.. Then I don't know. I hope some one comes along that knows something. Sounds serious. I'll keep on thinking about things. But I have to leave the house now so..
Sorry.

CuraeL said:
Sorry man, I have no idea what you may have formatted then.. :/
I can't think of anything right now.. If you can't get to download mode and flash stock kdz again.. Then I don't know. I hope some one comes along that knows something. Sounds serious. I'll keep on thinking about things. But I have to leave the house now so..
Sorry.
Click to expand...
Click to collapse
thx mate. Just wondering why can't get to download mode. After formatted a driver, flash stock kdz successfully and the stock rom work pretty well.

did you fix the problem, i have almost the same issue, my phone gos into first download mode screen, but not the second one, so noway to flash a kdz, help us please.

Related

[Q] Hard bricked G2 after flash

Hi everyone
I may have bricked my G2. I use to have a Samsung Galaxy S which I flashed many times so I kinda know when I mess up with instructions. This time though, things look a bit more serious... Anyway, here is what happened:
I flashed the Cloudy G3 rom (1.0) for my G2 D802 32gb. Original rom was stock rooted 4.4.
I followed the instructions :
- Backup rom
- All wipes
- Flash kitkat baseband
- Flash rom zip
- Get through the aroma installer steps
But then, when it asked to reboot, the phone just shut down.
Now it won't turn on. All I have is a quick look at the LG boot logo, and then the screen goes all black (blacklit is still on) again.
All I managed to do so far is maintaining the LG boot logo a bit longer on screen by alternatively pressing volume + or - at random times.
I can't access recovery or download mode anymore.
Plugging the phone will only show the LG boot logo and do all the same.
The phone is no longer recognized by my computer.
When I plug it, I get 13 new windows asking me to format the device and one I can explore.
Inside, there is one folder named "Image", filled with 51,4 Mb of files...
Quite confusing.
I don't know what to do, so any help to get the phone back to work will be appreciated
Thank you in advance.
Eijo said:
Hi everyone
I may have bricked my G2. I use to have a Samsung Galaxy S which I flashed many times so I kinda know when I mess up with instructions. This time though, things look a bit more serious... Anyway, here is what happened:
I flashed the Cloudy G3 rom (1.0) for my G2 D802 32gb. Original rom was stock rooted 4.4.
I followed the instructions :
- Backup rom
- All wipes
- Flash kitkat baseband
- Flash rom zip
- Get through the aroma installer steps
But then, when it asked to reboot, the phone just shut down.
Now it won't turn on. All I have is a quick look at the LG boot logo, and then the screen goes all black (blacklit is still on) again.
All I managed to do so far is maintaining the LG boot logo a bit longer on screen by alternatively pressing volume + or - at random times.
I can't access recovery or download mode anymore.
Plugging the phone will only show the LG boot logo and do all the same.
The phone is no longer recognized by my computer.
When I plug it, I get 13 new windows asking me to format the device and one I can explore.
Inside, there is one folder named "Image", filled with 51,4 Mb of files...
Quite confusing.
I don't know what to do, so any help to get the phone back to work will be appreciated
Thank you in advance.
Click to expand...
Click to collapse
same here after flashing the wrong kernel, and tried with the good one using fastboot....
please help!
darkflyer1983 said:
same here after flashing the wrong kernel, and tried with the good one using fastboot....
please help!
Click to expand...
Click to collapse
At least I'm not alone :laugh:
I found this thread but haven't tried yet. Don't know if the problem is similar.
I really hope the phone isn't dead, it's almost brand new
This is exactly what I have . The main problem is we can not see phone partitions. Always the alarm "can not access " or "format" !Waiting for some body to help restaure our LG G2.
3205
Are you still under warranty. If you can't get into download mode that means that LG won't be able to either. You could process a return directly from LG.
Problem solved ...
Somehow I did manage to hard reset (vol - & power, wait for LG logo, release and then press vol - & power again) and then access recovery mode, so I did restore my backup (which had been renamed to ... 1970-05-01 ! lol) and my G2 is now back to life.
Weirdest thing ever... Kinda worried about flashing it again now !
Thing to remember : always have a backup file.
You are lucky man! I've done it but nothing after. I can access to hard reset but when I push power button the screen goes black as before ....
Is it actually in "Download Mode"?
GeneralMills777 said:
Are you still under warranty. If you can't get into download mode that means that LG won't be able to either. You could process a return directly from LG.
Click to expand...
Click to collapse
So, if my G2 shows "Download Mode" on the screen with the little white dots, but it's not recognized by Windows 7, Ubuntu, or Knoppix, and is for all intents and purposes, non-responsive, does anyone know if it's actually in "Download Mode"?
Eijo said:
Somehow I did manage to hard reset (vol - & power, wait for LG logo, release and then press vol - & power again) and then access recovery mode, so I did restore my backup (which had been renamed to ... 1970-05-01 ! lol) and my G2 is now back to life.
Weirdest thing ever... Kinda worried about flashing it again now !
Thing to remember : always have a backup file.
Click to expand...
Click to collapse
Peperepe said:
You are lucky man! I've done it but nothing after. I can access to hard reset but when I push power button the screen goes black as before ....
Click to expand...
Click to collapse
In my case, it just stuck on the same screen. Nothing moves.
honest1212 said:
In my case, it just stuck on the same screen. Nothing moves.
Click to expand...
Click to collapse
same problem here:
+ Download mode with some blue dot and nothing move, PC has no usb connection detected
+ Stuck on the LG logo screen with normal boot
+ NO recovery
+ it does FACTORY RESET but keep processing and nothing happen
Helped me, too.
Eijo said:
Hi everyone
I may have bricked my G2. I use to have a Samsung Galaxy S which I flashed many times so I kinda know when I mess up with instructions. This time though, things look a bit more serious... Anyway, here is what happened:
I flashed the Cloudy G3 rom (1.0) for my G2 D802 32gb. Original rom was stock rooted 4.4.
I followed the instructions :
- Backup rom
- All wipes
- Flash kitkat baseband
- Flash rom zip
- Get through the aroma installer steps
But then, when it asked to reboot, the phone just shut down.
Now it won't turn on. All I have is a quick look at the LG boot logo, and then the screen goes all black (blacklit is still on) again.
All I managed to do so far is maintaining the LG boot logo a bit longer on screen by alternatively pressing volume + or - at random times.
I can't access recovery or download mode anymore.
Plugging the phone will only show the LG boot logo and do all the same.
The phone is no longer recognized by my computer.
When I plug it, I get 13 new windows asking me to format the device and one I can explore.
Inside, there is one folder named "Image", filled with 51,4 Mb of files...
Quite confusing.
I don't know what to do, so any help to get the phone back to work will be appreciated
Thank you in advance.
Click to expand...
Click to collapse
hi dude , i had the same issue , and i lost my g2 cause of it , please dont mess with the partitions , to all of you please dont delete the partitions , just turn off your phone , press volume up and push usb cable you ll get into download mode , from there yo can go back to stock by the .tot flashing method or kdz but dont mess with partitions , i deleted partitions and my phone wad totally dead , no one could repair it
Something happened to me today...
Sent from my LG-D802 using XDA Free mobile app

Lg G2 hardbrick?

Hello. I have problem with new g2 d802.
After root and install twrp, then dorimanx kernel my Phone joined to fastboot mode.. I had to Flash via fastboot stock images, but unfortunely i flashed some files from sprint version.. After this Phone was in qhsusb_half mode and all partitions tried to Mount when Phone was connected. I restore all files via Ubuntu, gdisk etc. But i forget one image.. Now im stuck, After reboot device show me only lg logo, when i'll turn off device , and plug cable with vol+ it load download mode , but my PC not detect device, in device manager it dont show anything, it dont have recovery.. Vol- and cable plug show only lg logo. Can,t join any mode except download, but my PC, and laptop don't detect any device plugged. Have somone idea to solve it, or it's Just hardbrick and only service Can help? I have warranty, and i Can tell it show only lg logo After ota upadte right?
Sorry lang, via tapatalk.
OKAY I REPAIRED IT!
SOLVED problem, now i have again rooted stock rom and it's booting great.
THANKS FOR HELP!!!! :irony:
Ganjax said:
OKAY I REPAIRED IT!
SOLVED problem, now i have again rooted stock rom and it's booting great.
THANKS FOR HELP!!!! :irony:
Click to expand...
Click to collapse
Hi
can you share your solution ?
I am having the same problem as you
Thanks
Yeah, do your phone show lg logo only? Or total black?
Same problem
Ganjax said:
Yeah, do your phone show lg logo only? Or total black?
Click to expand...
Click to collapse
Hi, I'm facing the same problem.
My phone only shows lg logo.
Thanks for your help
Turn off your phone by hold power for few sec. Now hold vol- and power, when device will show you LG logo, then repress power button, but vol- need be hold non-stop . U'll see for a while white screen, and factory reset, now press 3 times power button, it should show recovery. Now search adb sideload and install by sideload philz recovery cwm. If u'll finish, reboot recovery, then wipe data/factory reset and wipe for install clean rom. Now install by adb sideload CM11. After this ur phone should boot, and show system, u should able to plug usb now and put stock rom to sd. Check my solutions. It worked for me and my phone i alive
You had a lot of luck..the first thing you have done is - you flashed the wrong kernel.
No luck, every g2 will stuck by wrong kernel flash, but ofc if it is also for G2 but other variant.
You flashed also the wrong files after

[Q] Flashed wrong kernel!!!

i Was trying to get rid of the hissing noise on my
Lg g2 D802
i had TWRP installed
I read in a trhead that flashing the dorimanx kernel should fix that problem.
So i tried flash it, but instead of flashing the D802 i flashed the D800, i know i'm an idiot :/
I had a backup stock kernel but i think that's a wrong one too, again i'm an idiot
Now my phone boots into a black screen within the left top corner:
[2800] Fastboot mode started
[2850] udc_start()
i cannot boot into twrp anymore, it's basically bricked.
Can anyone help me recover my phone? i loved that thing, you will be my hero.
i promise when this is resolved i will never mess around with roms and kernels ever agian, i'm freaking out
henny420 said:
i Was trying to get rid of the hissing noise on my
Lg g2 D802
i had TWRP installed
I read in a trhead that flashing the dorimanx kernel should fix that problem.
So i tried flash it, but instead of flashing the D802 i flashed the D800, i know i'm an idiot :/
I had a backup stock kernel but i think that's a wrong one too, again i'm an idiot
Now my phone boots into a black screen within the left top corner:
[2800] Fastboot mode started
[2850] udc_start()
i cannot boot into twrp anymore, it's basically bricked.
Can anyone help me recover my phone? i loved that thing, you will be my hero.
i promise when this is resolved i will never mess around with roms and kernels ever agian, i'm freaking out
Click to expand...
Click to collapse
Try to flash back to stock with kdz, as far as I am hearing this you kinda soft bricked it but not hard so it's still recoverable, you could also maybe try to flash your recovery back with fastboot since your in fastboot mode but I never tried that so I suggest you to go back to stock with kdz flashing
ye try enter download mode and follow this (use search) i think its volum up and connect usb to pc
http://forum.xda-developers.com/showthread.php?t=2432476
wulsic said:
Try to flash back to stock with kdz, as far as I am hearing this you kinda soft bricked it but not hard so it's still recoverable, you could also maybe try to flash your recovery back with fastboot since your in fastboot mode but I never tried that so I suggest you to go back to stock with kdz flashing
Click to expand...
Click to collapse
thank you for your response, but i am kind of noob and have no idea how to do that correctly, could you link something or explain it?
henny420 said:
thank you for your response, but i am kind of noob and have no idea how to do that correctly, could you link something or explain it?
Click to expand...
Click to collapse
Try the link above mentioned by Overclocked
OverClockeD_GR said:
ye try enter download mode and follow this (use search) i think its volum up and connect usb to pc
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Thank you for your reply, i tried to get into download mode, but failed every time, i can only press the power button for 5 sec and the Lg logo apears, then i get the same screen.
did this way?
Your phone must be turned off before starting the steps from this guide.
So, press power button and select “power off”.
Then, press the volume up button on your LG G2.
While you are holding the volume up button, plug in your phone’s USB cable.
Keep pressing the Volume up button until the download mode is being displayed.
Now the phone will install some drivers – it should take around 10 minutes to complete; the best will be to let your device install the mentioned drivers.
OverClockeD_GR said:
did this way?
Your phone must be turned off before starting the steps from this guide.
So, press power button and select “power off”.
Then, press the volume up button on your LG G2.
While you are holding the volume up button, plug in your phone’s USB cable.
Keep pressing the Volume up button until the download mode is being displayed.
Now the phone will install some drivers – it should take around 10 minutes to complete; the best will be to let your device install the mentioned drivers.
Click to expand...
Click to collapse
the problem is, i can't turn it off (very weird) it instantly gives me the logo for 1sec and turns back to the same screen.
you can also try this.
http://forum.xda-developers.com/showthread.php?t=2477595
just use search mate like i do now... its soft brick i think relax and you will find it many had same prob before
henny420 said:
i Was trying to get rid of the hissing noise on my
Lg g2 D802
i had TWRP installed
I read in a trhead that flashing the dorimanx kernel should fix that problem.
So i tried flash it, but instead of flashing the D802 i flashed the D800, i know i'm an idiot :/
I had a backup stock kernel but i think that's a wrong one too, again i'm an idiot
Now my phone boots into a black screen within the left top corner:
[2800] Fastboot mode started
[2850] udc_start()
i cannot boot into twrp anymore, it's basically bricked.
Can anyone help me recover my phone? i loved that thing, you will be my hero.
i promise when this is resolved i will never mess around with roms and kernels ever agian, i'm freaking out
Click to expand...
Click to collapse
I did the same thing today by accident. I still can boot into recovery tho, TWRP. Copied the correct kernel file via OTG but it just reboots the recovery and doesn't install the kernel. Have you find any solutions?
EDIT: I actually managed to flash the right kernel and the problem is now fixed. Check everything before flashing something guys, caution

[Urgent Help Required!] Phone boots, but no download mode or recovery!

Hi,
Have a weird situation, but try as much as I may, I'm unable to resolve it.
My phone is rooted (international D802) and was running fine. Had a screen issue and got it replaced at the service center but their system identified my phone as a rooted device, and a couple of days later the problems started.
The issues I'm facing right now:
1. The phone doesn't charge when switched on, at all.
2. The phone doesn't reboot either.. not instantly anyways. If powered off, or rebooted, the phone doesn't turn back on, it just goes dead. It does boot again though if tried after a couple of hrs.
3. The phone charges when its off (shows no light or indicator though, like its bricked)
4. Cannot go into either recovery or download mode. Coz the phone doesn't boot when restarted or when i try to reboot into recovery.
5. When it does magically start after a few hrs (upon long pressing the power button), even if I try to go into download or recovery via the vol keys, it just boots to android.
6. The phone is recognized properly as LG G2 under windows and all the drivers install too.
7. The phone isn't recognized under Linux... tried both Ubuntu and Knoppix.
Travelling out of the country in a few days, really need to sort this out.
Any and all help/suggestions will be greatly appreciated.
Thanks in advance
Somebody... Anybody? :'(
When your phone rebooted I would recommend you firstly to activate USB Debugging in the developer settings. You said your device is rooted? So try to install the Auto Rec recovery here
https://www.androidfilehost.com/?w=files&flid=13763 - but make sure you are on Kitkat. Now, install the app normal and let the app install all things. After installation, the app asks you to reboot to recovery, now press reboot to recovery.
Maybe you have luck and the phone reboots to TWRP. In TWRP you can go to Reboot and then Reboot to Download mode.
Now (if all worked) you can flash the stock rom .kdz file of the d802 via the FlashTool 2014.
Hope you have luck, please keep me up to date if everything worked.
Yours, Flo
Good luck!!
Thanks a lot for the response Flo, but the problem is that i never got around to updating to a Kitkat rom... the rom i was never got updated and I was kinda happy with how things were working so didn't jump on to any other rom.
Anything I can do in my current situation?
Go back to stock via lg flash tool
_____________________________________Read more write less and be smart
siggey said:
Go back to stock via lg flash tool
Click to expand...
Click to collapse
As mentioned in my first post, can't get into download mode.
Try this
http://forum.xda-developers.com/showthread.php?p=56000637
LG G2 is UNBRICKABLE NOW! [FIX REAL HARD BRICK]
_____________________________________Read more write less and be smart

LG G6 Stuck - Cant acces TWRP, bad flashed android

Hello guys.
I was using Fulmics ROM, it was ok, but I wanted to switch it back to LG G6 stock
https://forum.xda-developers.com/lg-g6/development/rom-eu-lg-h870-20a-rom-t3794503
I mistakely went to this page:
https://androidfilehost.com/?w=files&flid=272154
and downloaded all these files, then I put them in SDCard and ran TWRP, then I wiped all and installed each of them. I thought they were android files, but no. My phone is now stucked in "welcome to Fastboot mode:", I can see and controll connected device on Fastboot, but not ADB ("error: no devices/emulators found"). Now I cant run system, cant go to recovery. Im doing that "volume down+power button" then releasing and again pushing power button, it asks to wipe all I choose yes, then again yes, but after that it should boot into TWRP but no, it goes again to "welcome to Fastboot mode:"
I know guys, I'm really nooby...
Please give me your help hand.
Thanks.
ReeTcz said:
Hello guys.
I was using Fulmics ROM, it was ok, but I wanted to switch it back to LG G6 stock
https://forum.xda-developers.com/lg-g6/development/rom-eu-lg-h870-20a-rom-t3794503
I mistakely went to this page:
https://androidfilehost.com/?w=files&flid=272154
and downloaded all these files, then I put them in SDCard and ran TWRP, then I wiped all and installed each of them. I thought they were android files, but no. My phone is now stucked in "welcome to Fastboot mode:", I can see and controll connected device on Fastboot, but not ADB ("error: no devices/emulators found"). Now I cant run system, cant go to recovery. Im doing that "volume down+power button" then releasing and again pushing power button, it asks to wipe all I choose yes, then again yes, but after that it should boot into TWRP but no, it goes again to "welcome to Fastboot mode:"
I know guys, I'm really nooby...
Please give me your help hand.
Thanks.
Click to expand...
Click to collapse
Try to enter download mode and flash stock kdz of your G6 model with LG UP and UPPERCUT, or try with the update error part of LG bridge. This should solve the problem. Search a bit in this forum and you will find how to flash with LG UP.
mprovi_15 said:
Try to enter download mode and flash stock kdz of your G6 model with LG UP and UPPERCUT, or try with the update error part of LG bridge. This should solve the problem. Search a bit in this forum and you will find how to flash with LG UP.
Click to expand...
Click to collapse
I cant get into download mode, it blinks on quater of second and turn again into Fastboot... LG Bridge dont see that my phone is connected LG UP too... :/
ReeTcz said:
I cant get into download mode, it blinks on quater of second and turn again into Fastboot... LG Bridge dont see that my phone is connected LG UP too... :/
Click to expand...
Click to collapse
Discharge the phone completely or turn it off and connect to the usb to the pc while pressing volume up button. Is the only way I know now to do it.
mprovi_15 said:
Discharge the phone completely or turn it off and connect to the usb to the pc while pressing volume up button. Is the only way I know now to do it.
Click to expand...
Click to collapse
I used "TOOL ALL IN ONE" programme, that flashed me a Melina TWRP and it works! I had some errored system and data parititions but I think a repaired them in TWRP, so Im installing back Fulmics. I will write after a minute.

Categories

Resources