So my g2 has a couple of chips and scratches, but thats okay given the things its been through, and idk, it gives it more of a personal kinda feel. I cant explain. But recently, my headphone jack began to stop detecting earphones at random intervals, and it was becoming a pain.
So i decided to pop off our "non removeable" but totally removeable back plate, and have a look. Its easily done by removing the sim tray and using a guitar pick or pry tool.
I saw the headphone jack in the corner, grabbed a small implement and cleaned it a little, and then put some double sided tape over it, making sure it touches no metal, and some more in other places to stop that annoying creeking my phone sometimes does.
Put it all together, and voila! I dont know why this worked, it just did and i thought id post it here in case it works for others.
I think its because when i walk the pressure against my headphone jack pushes the port against the back of the phone slightly, and angling the jack. The tape, if this is the case, holds it all together, and reduces creeking
Like i said, might just be a one off, but it worked so i thought id tell you guys, if it turns out it was just me this works for ill have the thread removed.
Thanks for reading!
I don't post much but I googled this issue yesterday and tried your solution and it worked! Just wanted to log in and thank you!
Related
The tip of a headset snapped off inside the black plastic headset jack, so the phone thinks that headphones are always plugged in. This causes the speaker to not work. I got a broken motherboard online for cheap. I am going to attempt to switch the jacks. Besides "That's a dumb idea", does anyone have any suggestions or words of wisdom? Thanks.
-Ross
Broken headphone socket
You could try a matchstick or something similar with a tiny dab of superglue, let the glue go off and with a bit of luck you'll be able to remove the bit of broken jack plug without disassembling your handheld. Good luck.
I should have mentioned that I tried super glue and disconnecting the battery and wrapping a wire arounda thin piece of metal and pulling out the plug with an electromagnet. Neither worked. It is lodged in there really good.
Nightmare! I've got a long shot but it may be worth a go. Given that some people are using the ink tube part of a bic biro pen to mod 2.5-3.5mm adapters I guess that the ink tube part is slightly wider than 2.5mm. Is it possible that you could slide a bit of ink tube in the socket over the broken bit of jack plug and pull it out?
i have to advice to
if you are going to dismantle your xda there is a pdf here that shows how you must do it and the tools for it search and you will find it (serarch my posts) i posted it here cant remember where lol
its a step by step guide ....
I've tried this in 2 XDA II's. I put my headphones it one and it works but you cant hear it and you have to hit the cap around a little for it to get sound for a slip second. I put my headphones in another XDA II and it works fine.. So obviously there is something wrong with this XDA II's headphone jack. The rubber cover to the headphone jack is missing, would this have any effect on it?
EDIT-
When I put it in the broken headphone jacked PDA when I insert the headphones in it makes a crinkle noise from me pushing it in. The other XDA II goes in smoothly. =/
Hi.
Rubber cap doesn't change anything (apart from stopping rubbish from getting into connector )
What you described is a case of worn out connector (in PDA).
It happens sometimes. Jack type connector aren't so tough, especially when you plug in and out often.
If you dismantle Blueangel, you'll have clear view of connector body soldered to PDA's mainboard.
You can do it. You can let somebody do it. Or You can leave it to professionals.
The connector needs to be replaced (very cheap part).
Maybe it's enough to bend metal terminals inside a little. A person who does hardware will know.
There's a optimistic version though.
Maybe only cleaning the terminals would do for you (I doubt it though).
It can be done without opening BA.
I'd recommend using some special spray (for cleaning electrical contact metals). Ask in electronic parts shop.
Good luck.
I ment my XDA II, not XDA IIs, lol. I have no expierence with opening the phone but I am good with electronics, but I don't know exactly what I'm looking for =/. I think I might just buy the HT820's Bluetooth headset, that would solve my problem overall.
Faulty socket repair...
Hey guys,
I have the same problem as above (crackling sound through headset) and the O2 service centre said it would cost £97 to fix.
But just did a web search and found a small company in London that said they can fix it (within 2 hours!!!!) for only £30!!!!
Im off to get it sorted so I'll let you know how it all went!!!
Richie Rich.
Mine wasn't like this until I bought it. I bought it from a friend for only $100USD because I'm very good friends with him, it works fine perfectly but the only problem is the headphones don't work in it (any headphones) and he knows there is something wrong with the jack, it wasn't like this until recently it happened. It's cheap to fix probably... but I'd rather just buy the HT820 bluetooth headset, its a good replacement instead of having to send in the PDA to fix a little headphone jack port I wont be ever using sooner or later.
but hey if that place fixes your phone, reply to this topic I want to know!
Headset Jack
I had this exact same problem in the past.
The headset would crack and go out every once in a while, sometimes I would have to move it around in order to get any sound at all.
I didn't do anything about it until it completely broke off, yes the inside plastic connected to the motherboard broke...
So I went to open it up, its not that hard, just a few screws, but I had to buy a torax screw driver (not that expensive)
I was also a bit shy about opening it, but I found this post:
http://forum.xda-developers.com/viewtopic.php?t=8525&highlight=opening+himilaya
you wont have to open it all the way up... just pulling the back cover off, then you will see the headset jack,
If it isn't broken or cracked then your solution would just be to take the metal connectors and a flathead screwdriver, and bend them,
Don’t bend the metal connectors too much so you can’t put a headset in, but just enough where there is definite connection around the headset,
You might want to put a headset in and see the dimensions before you close it (to save you from opening it up again)
You might want to clean the metal if it is dirty, ether with a dab of eyeglass cleaner on a soft cloth (eyeglass cleaner works well with electronics, due to the alcohol that evaporates)
Although if the metal is encrusted or rusty, you might want to take a small strip of sandpaper, or some abrasive object, but don’t rub too hard or you'll take them off!
Don’t worry too much about opening your device up; it is not hard, just open it with caution.
Good luck!
imablackhat, hi, did u mean that ht820 can output sound from media player & every sound from xda2? my current BT is bluetrek G2 and as far as i'm using it for talking only. how many hours the batt can last if we continously hear musics?
its 17 hours of music, www.expansys.com, search HT820, its the headset. I'm considering buying it for cheaper on eBay.
suddenly, the speakers of my wizard (Qteck 9100) doesn't work anymore.
When playing mp3's or making a phone call, I just can't here anything anymore! When using my headset, everything works fine.
Since there are 3 speakers, (2 stereo for music and 1 for phone speaker) which doesn't work anymore, I suppose this is a software error and not my hardware.
Is there anyone with some ideas for registry changes or so to make it work again? Else I will return it and let them fix it (still in garantee)
thanks!
CIAO!
VOODOOS!L
the main speaker on my 9100 just quit one day while it was sitting on my desk and hasn't worked since. Hard reset didn't help. New rom install didn't help. Gonna take it apart and look around soon.
guttrhead said:
the main speaker on my 9100 just quit one day while it was sitting on my desk and hasn't worked since. Hard reset didn't help. New rom install didn't help. Gonna take it apart and look around soon.
Click to expand...
Click to collapse
I've had this happen to me. What I surmised was that the phone probably thought the headset was still plugged in. I had to do a headset exchange with T-mobile USA.
There's a known fault in the wizard headphone jack socket switch which stays open when the head phone jack is removed. Plugging the jack in and giving it a good "waggle" sorts it apparently.
PS "waggle" is an old Swedish word for moving something back and forth while having your left trouser leg rolled up to your knee.
eek
this actually happened to me when my headphone jack's tip broke off and stayed in the connector. if you pop off the battery, you can see the tip. just make sure nothing's there, to verify that your problem isn't physical.
llcoolj said:
There's a known fault in the wizard headphone jack socket switch which stays open when the head phone jack is removed. Plugging the jack in and giving it a good "waggle" sorts it apparently.
PS "waggle" is an old Swedish word for moving something back and forth while having your left trouser leg rolled up to your knee.
Click to expand...
Click to collapse
I tried the "waggle" but it didn't work. I ended up replacing the headset since it was still under warranty with T-Mobile USA. However I use the headset plug quite a lot since I use the phone as an MP3 player during my work commute, so this is a cause for concern.
I had never used the headset and never put anything in that jack. Still the speake stopped working.
found out what was wrong with mine. Turns out that the ribbon cable that connects the lcd part to the keyboard part got snagged on something and had a couple of mm gash torn in the side. I noticed that sliding the keyboard open made kind of a crumply noise. I thought it was some flaw in the slide design, but it was just the broken cable rubbing against something. Still not sure where to get it fixed though (other than germany)
I had the same problem with this f*** headsets... I tried since two hours to "waggle" it and it didn't change anything... I'm going to try with other headsets tomorrow if it's the only solution
This happened to me again with my replacement MDA. This is what I ended up doing - take off the back plate and remove the battery. If you look at where the battery used to be towards the bottom of the phone, you'll sorta see the headphone connector. Use your stylus and wiggle it around thru the slight hole. That might do the trick.
Thanks,
I could solve my problem too this way, just kept moving in and out the headphone jack till it worked.
CIAO!
VOODOOS!L
One question, How many times you did it to make the sound work again ?
well, i think it took me some time, just wanted to give it up and suddenly it worked (play some music while trying, so you here it when it will work)
I also pushed and turned a little bit with the headphone jack into the headphone input connector, but be carefull with that, the headphone jack could break and parts of it could stay into the headphone input connector, and I assume that would make your problem bigger than before...
anyway, if it really doesn't work, you should return it asap, I should be replaced ...
good luck
This fixed my speakers
Incase someone wonders over to this thread:
I very gently wiggled the headphone jack whilst playing an mp3, and it worked.
I am so relieved that I dont have to take it in to be repaired.
If you cant get it to work straight away, try blowing into the socket, or use a toothpick. But remember to be gentle.
hey guys,
here is the short story of whats up. I broke off the tip of a headphone adapter in my wizard. basically the smallest piece of metal is stuck in the headphone jack and refuses to come out.
First, any ideas on how to get it out, I tried toothpick/paper clip with super glue not too much luck. If its easy to take apart say so and I'll try that.
The other part is that my phone makes no noise and I can't talk into the mic on it cause the phone thinks there is constantly a headset attached. Anyone know a workaround on getting the jack disabled or a workaround like that?
Thanks in advance
It happened to me once. I took the phone apart, and poked a pin into the other end of the headphone jack (the one facing inside the phone) and it eventually popped out. Maybe you could try some small tweesers if you don't want to take it apart.
Taking it apart isn't so hard, you need a small torx key, and somethign flat to prise bits open.
I did a REALLY a stupid thing this weekend. I had the trunk of my wife's car up and had no pockets, so I put the phone on the edge of the trunk and put everything else in the trunk. I swung the lid down and it bounced back up.
I had no idea what was keeping the trunk from closing until I saw my phone sitting there. Thankfully, the trunk's on a Toyota Echo, so it didn't crush the phone, but it did dent the faceplate right where the speaker and email/browser button is.
Now calls are really scratchy and crackling, so I'm guessing that I have a partial connection to the speaker or crunched it well enough to kill it.
While it's useable, it makes it hard to use - is there anyone on the forums that does repairs?
kcfried said:
While it's useable, it makes it hard to use - is there anyone on the forums that does repairs?
Click to expand...
Click to collapse
How about you!!??
All the info you need is here.
Mike
I know this thread is a bit old, but I just fixed the same problem with my Hermes.
Find a good disassembly guide and pull the beast apart, when you get to the speaker, it will be caved in/crushed.
There are two clips on either of the long sides, unclip them and carefully lift the metal bit off a little way, get a small jewelers flat head screwdriver and push the dints out, being very careful of the delicate wires.
Or you could just find a new speaker
EDIT: While you're at it, bend the speaker contacts out a bit too just in case they were squashed, also to get better contact.