[Q] Accidently closed TWRP - Galaxy Note 3 Q&A, Help & Troubleshooting

Hi guys, I will try and explain this as simple as possible.
I as trying to install cyanogenmod 11 on my phone, and everything seemed to go alright until I made a mistake. I used TWRP to first backup my stock rom on the phone, and then when I was supposed to reboot into the app, I accidently rebooted the phone.
Now the problem is that the phone does not have any OS installed, so what is happening is that it's trying to boot into an OS that's not there, and instead ends up being stuck on the Samsung logo. I can enter Odin mode just fine, but for the love of god I cannot seem to figure how to get back into the TWRP application, or if it is even possible.
I do have the backup of the ROM stored on my SD card, and I've now moved it over to my PC, but it still does not seem to help me in any way. I've trid to launch the Odin3 program on my pc, in an attempt to to try and launch in TWRP through that, but it has all been without any success, so now I come to this board of guinesses, asking for help!
As an added bit of information, this was my first time trying to install a custom rom, so yeah.. Puff..
- The lost Dane.
- Edit -
I tried to "flash" by doing what this link said, in the hopes that my phone would boot into the program, but alas, it only booted back to the logan saying "samsung Galaxy Note 3 SM-N9005" :/
http://forum.xda-developers.com/showthread.php?p=30694404
-- Edit Edit --
To make it super clear ... If I could get back into TWRP, I would be able to run my backup. I know how that app works, I just simply cannot get back into, and I do not know if it is even possible. I've searched and tried various guides to "flash TWRP through Odin" but it has all been without any success... :/

Thaelern said:
Hi guys, I will try and explain this as simple as possible.
I as trying to install cyanogenmod 11 on my phone, and everything seemed to go alright until I made a mistake. I used TWRP to first backup my stock rom on the phone, and then when I was supposed to reboot into the app, I accidently rebooted the phone.
Now the problem is that the phone does not have any OS installed, so what is happening is that it's trying to boot into an OS that's not there, and instead ends up being stuck on the Samsung logo. I can enter Odin mode just fine, but for the love of god I cannot seem to figure how to get back into the TWRP application, or if it is even possible.
I do have the backup of the ROM stored on my SD card, and I've now moved it over to my PC, but it still does not seem to help me in any way. I've trid to launch the Odin3 program on my pc, in an attempt to to try and launch in TWRP through that, but it has all been without any success, so now I come to this board of guinesses, asking for help!
As an added bit of information, this was my first time trying to install a custom rom, so yeah.. Puff..
- The lost Dane.
- Edit -
I tried to "flash" by doing what this link said, in the hopes that my phone would boot into the program, but alas, it only booted back to the logan saying "samsung Galaxy Note 3 SM-N9005" :/
http://forum.xda-developers.com/showthread.php?p=30694404
-- Edit Edit --
To make it super clear ... If I could get back into TWRP, I would be able to run my backup. I know how that app works, I just simply cannot get back into, and I do not know if it is even possible. I've searched and tried various guides to "flash TWRP through Odin" but it has all been without any success... :/
Click to expand...
Click to collapse
Did you hold volume up+home+power button to get into recovery mode?
In case your twrp get corrupted due to flashing failure previously
1. Download twrp from the following. 2.6.3.7 if you were running 4.3 or 2.6.3.8 if you were running 4.4.2(not sure if 2
6.3.8 is 4.3 compatible). For odin flashable use the one with .tar
http://www.techerrata.com/browse/twrp2/hlte
2. Get into download mode(vol down+home+power)
3. Link the downloaded .tar to pda in odin. Odin log should show 'added' once you connect phone to pc
4. Start the process. Once finish phone should boot into recovery automatically but it'll try to boot back into OS. Just hold vol up+home+power button to get back into recovery

Rosli59564 said:
Did you hold volume up+home+power button to get into recovery mode?
Click to expand...
Click to collapse
When I do that, I get an ultra short blue text appearing on the screen, before it goes into downloading mode, with a red text saying "Could not do normal boot." So it basically goes right into odin mode.

Thaelern said:
When I do that, I get an ultra short blue text appearing on the screen, before it goes into downloading mode, with a red text saying "Could not do normal boot." So it basically goes right into odin mode.
Click to expand...
Click to collapse
I edited my post. You need to reflash twrp

You are an absolute god. I wish I could show my appreciation, but I fear words isn't even enough to even begin.. I managed to get into TWRP now, though my backup rom doesn't show up anymore, but I suppose that's because I run a different version of TWRP than I did first? Idk, but really appreciate that you were able to get me back into TWRP.

Thaelern said:
You are an absolute god. I wish I could show my appreciation, but I fear words isn't even enough to even begin.. I managed to get into TWRP now, though my backup rom doesn't show up anymore, but I suppose that's because I run a different version of TWRP than I did first? Idk, but really appreciate that you were able to get me back into TWRP.
Click to expand...
Click to collapse
Yes if you know your previous twrp version than you can restore your old rom backup
---------- Post added at 08:44 AM ---------- Previous post was at 08:40 AM ----------
Thaelern said:
You are an absolute god. I wish I could show my appreciation, but I fear words isn't even enough to even begin.. I managed to get into TWRP now, though my backup rom doesn't show up anymore, but I suppose that's because I run a different version of TWRP than I did first? Idk, but really appreciate that you were able to get me back into TWRP.
Click to expand...
Click to collapse
Right you need your previous twrp version to use the backup
Hehe you can actually press the thanks button

Rosli59564 said:
Yes if you know your previous twrp version than you can restore your old rom backup
---------- Post added at 08:44 AM ---------- Previous post was at 08:40 AM ----------
Right you need your previous twrp version to use the backup
Hehe you can actually press the thanks button
Click to expand...
Click to collapse
I really do appreciate the help you've given, but I have one final request, and I really do hope it isn't too much to ask. Say I am unable to find the same version of TWRP, I will have to actually flash cyanogenmod onto my device. I don't think it should be too tough now that I've managed to launch into TWRP, because now I should be able to just put the rom on my SD card, and then install the files, no?
if it helps you, my device is SM-N9005, and I had 4.3 when I started this whole thing. Cheers!
- Edit.
I tried to download the Nighty build from CyanogenMod's own homepage, but when I try and install it, it says failed, giving me an erro that says "This package is for "hlexx" devices: This is a." That's all it says ... Hmfh. Sooooooooo... Yes! I'm in recovery mode now, but without any rom. :/

Thaelern said:
I really do appreciate the help you've given, but I have one final request, and I really do hope it isn't too much to ask. Say I am unable to find the same version of TWRP, I will have to actually flash cyanogenmod onto my device. I don't think it should be too tough now that I've managed to launch into TWRP, because now I should be able to just put the rom on my SD card, and then install the files, no?
if it helps you, my device is SM-N9005, and I had 4.3 when I started this whole thing. Cheers!
- Edit.
I tried to download the Nighty build from CyanogenMod's own homepage, but when I try and install it, it says failed, giving me an erro that says "This package is for "hlexx" devices: This is a." That's all it says ... Hmfh. Sooooooooo... Yes! I'm in recovery mode now, but without any rom. :/
Click to expand...
Click to collapse
Yes you can flash any cm based rom.
You can also flash any stock rom such as SweetRom/X-Note/BobCat as most developers still keeping 4.3 rom in their thread.

Thaelern said:
I really do appreciate the help you've given, but I have one final request, and I really do hope it isn't too much to ask. Say I am unable to find the same version of TWRP, I will have to actually flash cyanogenmod onto my device. I don't think it should be too tough now that I've managed to launch into TWRP, because now I should be able to just put the rom on my SD card, and then install the files, no?
if it helps you, my device is SM-N9005, and I had 4.3 when I started this whole thing. Cheers!
- Edit.
I tried to download the Nighty build from CyanogenMod's own homepage, but when I try and install it, it says failed, giving me an erro that says "This package is for "hlexx" devices: This is a." That's all it says ... Hmfh. Sooooooooo... Yes! I'm in recovery mode now, but without any rom. :/
Click to expand...
Click to collapse
Try this link: http://download.cyanogenmod.org/?device=hlte
Sent from my toaster

blackknightavalon said:
Try this link: [
Sent from my toaster
Click to expand...
Click to collapse
Will that work on the international version of the Note 3 ? I'm starting to believe that's the whole culprint of why I can't get it to work. :/

Thaelern said:
Will that work on the international version of the Note 3 ? I'm starting to believe that's the whole culprint of why I can't get it to work. :/
Click to expand...
Click to collapse
Believe so. It's because of updater script i guess as described in the link
http://forum.xda-developers.com/showthread.php?t=2600648&page=2
Try flashing chenglu's 6.0.4.5 recovery.
http://forum.xda-developers.com/showthread.php?t=2454079
Just the same as you did for twrp. I think i read somewhere that changing recovery helped some people.
The worst just download sweetrom/x-note/bobcatrom or any stock 4.3 based rom if you deperately need the phone to boot up

Rosli59564 said:
Believe so. It's because of updater script i guess as described in the link
Try flashing chenglu's 6.0.4.5 recovery.
Just the same as you did for twrp. I think i read somewhere that changing recovery helped some people.
The worst just download sweetrom/x-note/bobcatrom or any stock 4.3 based rom if you deperately need the phone to boot up
Click to expand...
Click to collapse
So after having spent the better half of the night, I actually managed to get my phone to boot into cyanogenmod 11 ! But that joy was shortlived when I came to realize that wi-fi wasn't working, and I couldn't get it to work. I tried to factory reset as I had read would help, but alas it did no good. I figured I should try and run back a stock 4.4.2 rom and just be done with it, but that was when I realized I had lost my root (?!) so that wasn't really a possibility either, next I set out to try and find a way to root my phone now running cyanogenmod 11. I found a file here on XDA called "CF-Auto-Root-hlte-hltexx-smn9005.tar" but whenever I try and flash that onto my phone, my phone just stays stuck saying "trying to enter into recovery mode" and does not really go anywhere from there. I can get back into recovery mode if I flash "n9005-cwm-recovery-6.0.4.5(1116)" onto the phone, like you said, but that still leaves me without root access, which I need to throw a rom onto my device?! Arrrgh, this is getting silly, I just wish I could go back to my backup/ default rom on the device, but I can't.

Thaelern said:
So after having spent the better half of the night, I actually managed to get my phone to boot into cyanogenmod 11 ! But that joy was shortlived when I came to realize that wi-fi wasn't working, and I couldn't get it to work. I tried to factory reset as I had read would help, but alas it did no good. I figured I should try and run back a stock 4.4.2 rom and just be done with it, but that was when I realized I had lost my root (?!) so that wasn't really a possibility either, next I set out to try and find a way to root my phone now running cyanogenmod 11. I found a file here on XDA called "CF-Auto-Root-hlte-hltexx-smn9005.tar" but whenever I try and flash that onto my phone, my phone just stays stuck saying "trying to enter into recovery mode" and does not really go anywhere from there. I can get back into recovery mode if I flash "n9005-cwm-recovery-6.0.4.5(1116)" onto the phone, like you said, but that still leaves me without root access, which I need to throw a rom onto my device?! Arrrgh, this is getting silly, I just wish I could go back to my backup/ default rom on the device, but I can't.
Click to expand...
Click to collapse
About the cf auto root make sure you flash the one for 4.3. I believe you flashed the one for 4.4.2.
Doesn't really matter whether you have root access or not as long as you can boot into custom recovery. Just flash any custom rom. It'll give you root anyway.
Still if you need root just make sure you flash cf auto root then flash twrp or chenglu recovery. Flash the one for 4.3 that's the most important

Rosli59564 said:
About the cf auto root make sure you flash the one for 4.3. I believe you flashed the one for 4.4.2.
Doesn't really matter whether you have root access or not as long as you can boot into custom recovery. Just flash any custom rom. It'll give you root anyway.
Still if you need root just make sure you flash cf auto root then flash twrp or chenglu recovery. Flash the one for 4.3 that's the most important
Click to expand...
Click to collapse
But when I have cyanogenmod 11 installed, is that then not 4.4.2 ? I suppose that's what's giving me trouble... I'll try and see if I can find the cf auto root for 4.3 and return back if I was successful or not. Again, thank you for being so patient..
-Edit
This seems to be the only one I can find; http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
And I've already tried that one 3 times, but every time I flash it, the phone reboots and keeps trying to enter into recovery mode, and is unable to do so before I've flashed n9005-cwm-recovery-6.0.4.5(1116) again
this is what it says;
"recovery booting...
Recovery is not seandroid enforcing
Set warranty bit : Recovery "

Thaelern said:
But when I have cyanogenmod 11 installed, is that then not 4.4.2 ? I suppose that's what's giving me trouble... I'll try and see if I can find the cf auto root for 4.3 and return back if I was successful or not. Again, thank you for being so patient..
-Edit
This seems to be the only one I can find; http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
And I've already tried that one 3 times, but every time I flash it, the phone reboots and keeps trying to enter into recovery mode, and is unable to do so before I've flashed n9005-cwm-recovery-6.0.4.5(1116) again
this is what it says;
"recovery booting...
Recovery is not seandroid enforcing
Set warranty bit : Recovery "
Click to expand...
Click to collapse
You flashed 4.4.2 cm rom but you're on 4.3 booloader. So you need to use cf auto root for 4.3 which is available here
http://forum.xda-developers.com/showthread.php?t=2466423
read third post(download section)
---------- Post added at 09:41 PM ---------- Previous post was at 09:34 PM ----------
Rosli59564 said:
You flashed 4.4.2 cm rom but you're on 4.3 booloader. So you need to use cf auto root for 4.3 which is available here
http://forum.xda-developers.com/showthread.php?t=2466423
read third post(download section)
Click to expand...
Click to collapse
Just enter download mode and reflash twtp. I saw there are 4 different versions for 4.3(2.6.3.0/2 6.3.5/2.6.3.6/2.3.6.7). Flash 1 by 1 and see if it can restore your backup

Rosli59564 said:
You flashed 4.4.2 cm rom but you're on 4.3 booloader. So you need to use cf auto root for 4.3 which is available here
http://forum.xda-developers.com/showthread.php?t=2466423
read third post(download section)
---------- Post added at 09:41 PM ---------- Previous post was at 09:34 PM ----------
Just enter download mode and reflash twtp. I saw there are 4 different versions for 4.3(2.6.3.0/2 6.3.5/2.6.3.6/2.3.6.7). Flash 1 by 1 and see if it can restore your backup
Click to expand...
Click to collapse
You really are a boss with a heart of gold! I used the file you linked me, ran it, and sure enough it installed and gave me root access. Believe it or not, but I am learning from this! The whole thing about bootloader being different from the rom version was new to me. But I am up and running with root access now, so now I hope it shouldn't be too hard to get a stock rom thrown in. I've kinda given up on my backup. I no longer care for the files I had before, now I just want the phone up and running with wifi.. X_ X
- Edit
Or do you have any clue as to what is causing wifi to not work? I really don't mind the rom at all, I quite like it, but where I live wifi is mandatory as it's a lowered area with mountains around me, meaning LTE really isn't viable while at home.

Thaelern said:
You really are a boss with a heart of gold! I used the file you linked me, ran it, and sure enough it installed and gave me root access. Believe it or not, but I am learning from this! The whole thing about bootloader being different from the rom version was new to me. But I am up and running with root access now, so now I hope it shouldn't be too hard to get a stock rom thrown in. I've kinda given up on my backup. I no longer care for the files I had before, now I just want the phone up and running with wifi.. X_ X
- Edit
Or do you have any clue as to what is causing wifi to not work? I really don't mind the rom at all, I quite like it, but where I live wifi is mandatory as it's a lowered area with mountains around me, meaning LTE really isn't viable while at home.
Click to expand...
Click to collapse
Not sure about the wifi problem but yes you're good to go with a new rom. Make sure to choose only for 4.3 bootloader else you will run into problem later

Rosli59564 said:
Not sure about the wifi problem but yes you're good to go with a new rom. Make sure to choose only for 4.3 bootloader else you will run into problem later
Click to expand...
Click to collapse
Could you be so kind and to link me to a rom that works for 4.3 bootloader? I am so paranoid I'll end up picking something for 4.4.2, like I was about to do now. :S

Thaelern said:
Could you be so kind and to link me to a rom that works for 4.3 bootloader? I am so paranoid I'll end up picking something for 4.4.2, like I was about to do now. :S
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2495688
Post 1 choose V6
Or
http://forum.xda-developers.com/showthread.php?t=2472301
Post 3
Or
http://forum.xda-developers.com/showthread.php?t=2498687
Post 1 v3.0
Or
http://forum.xda-developers.com/showthread.php?t=2498687
Post 2 V5
There's a lot more in developement section. Just take a look there. Most developers still providing link for 4.3

Rosli59564 said:
http://forum.xda-developers.com/showthread.php?t=2495688
Post 1 choose V6
Or
http://forum.xda-developers.com/showthread.php?t=2472301
Post 3
Or
http://forum.xda-developers.com/showthread.php?t=2498687
Post 1 v3.0
Or
http://forum.xda-developers.com/showthread.php?t=2498687
Post 2 V5
There's a lot more in developement section. Just take a look there. Most developers still providing link for 4.3
Click to expand...
Click to collapse
Alright.. Time to get things done right! So just being sure I do it alright. I pick this one; http://forum.xda-developers.com/show....php?t=2498687
Download the one for 4.3 bootloader, once download I place the zip folder on my SD card
- Then boot into Recovery mode, wipe phone clean, and then install the rom directly from inside of Recovery mode?

Related

Hard Brick: PLEASE HELP -> SOLVED !

I tried to install custom recovery file provided fom a youtube video for my LG G2 D802 international version (cant post the link cause i am new, but the youtube user name is Phone Tech Kid, the video is titled: "LG G2: How To Install Custom Recovery (Easy Method)"
Here is a screenshot with the error message (simply copy and paste in your browser):
s14.directupload.net/images/140506/ii7j2kgp.png
The problem is that after successfully installing the recovery file i cant even go into recovery mode on reboot anymore. The phone is bricked :crying:
I didnt pay attention that the video is from 11.2013 and my device had the 4.4.2 KitKat from end ot March, seems that has caused the brick.
PLEASE help
Android-rocks said:
I tried to install custom recovery file provided fom a youtube video for my LG G2 D802 international version (cant post the link cause i am new, but the youtube user name is Phone Tech Kid, the video is titled: "LG G2: How To Install Custom Recovery (Easy Method)"
Here is a screenshot with the error message (simply copy and paste in your browser):
s14.directupload.net/images/140506/ii7j2kgp.png
The problem is that after successfully installing the recovery file i cant even go into recovery mode on reboot anymore. The phone is bricked :crying:
I didnt pay attention that the video is from 11.2013 and my device had the 4.4.2 KitKat from end ot March, seems that has caused the brick.
PLEASE help
Click to expand...
Click to collapse
that video is outdated and would never work on kitkat if you want custom recovery and can still boot into your phone(android os) then try AutoRec it is the easiest/only way to get recovery on kit kat
XxZombiePikachu said:
that video is outdated and would never work on kitkat if you want custom recovery and can still boot into your phone(android os) then try AutoRec it is the easiest/only way to get recovery on kit kat
Click to expand...
Click to collapse
Thank you, thanks a lot. I hear you with the AutoRec. But how i can get it on the phone while i cant boot the phone.. I cant even get into recovery mode I got only the error message (from the first post) for a several seconds, then the screen goes blank, black that is?
Android-rocks said:
Thank you, thanks a lot. I hear you with the AutoRec. But how i can get it on the phone while i cant boot the phone? I cant even get into recovery mode I got only the error message (from the first post) for a several seconds, then the screen goes blank, black that is?
Click to expand...
Click to collapse
can you get into download mode if so use back to stock guide to recover your phone
XxZombiePikachu said:
that video is outdated and would never work on kitkat if you want custom recovery and can still boot into your phone(android os) then try AutoRec it is the easiest/only way to get recovery on kit kat
Click to expand...
Click to collapse
XxZombiePikachu said:
can you get into download mode if so use back to stock guide to recover your phone
Click to expand...
Click to collapse
Yes i used the power+volume up button combination and it went in download mode, than the screen changed and showed "Firmware update" beneath it: "Do not unplug the USB connection until the prcess is complete." Is this the donwload mode?
The link with the recovery back to stock ROM seems complicated with lot of steps. Can i instead go for a google edition rom (such as EHNDROIX V) instead of the stock ROM at this stage?
Android-rocks said:
Yes i used the power+volume up button combination and it went in download mode, than the screen changed and showed "Firmware update" beneath it: "Do not unplug the USB connection until the prcess is complete." Is this the donwload mode?
The link with the recovery back to stock ROM seems complicated with lot of steps. Can i instead go for a google edition rom (such as EHNDROIX V) instead of the stock ROM at this stage?
Click to expand...
Click to collapse
yes that's download mode and that is not like flashing a rom through recovery that is the only way to get your phone back to working condition and method 3 is a batch file which does it all for you
XxZombiePikachu said:
yes that's download mode and that is not like flashing a rom through recovery that is the only way to get your phone back to working condition and method 3 is a batch file which does it all for you
Click to expand...
Click to collapse
Thanks a ton for helping me.
I guess i need to accomplish those 3 steps:
1.2). Firmware Files HERE! KitKat 4.4.2 Firmwares
1.3). Download R&D FlashTool (offline fix) & LGMOBILEAX: HERE & HERE
1.4).Download Drivers - Click Here
Than Method 3 from the link you provided.
How do i do it exactly? Drivers i have already installed the rom is downloded. Step 1.3 is not clear how it works togehter with Method 3?
Android-rocks said:
Thanks a ton for helping me.
I guess i need to accomplish those 3 steps:
1.2). Firmware Files HERE! KitKat 4.4.2 Firmwares
1.3). Download R&D FlashTool (offline fix) & LGMOBILEAX: HERE & HERE
1.4).Download Drivers - Click Here
Than Method 3 from the link you provided.
How do i do it exactly? Drivers i have already installed the rom is downloded. Step 1.3 is not clear how it works togehter with Method 3?
Click to expand...
Click to collapse
after you install the r&d tool and lgmobilelax you just have to run the batch in method 3 and everything should be done automatically
XxZombiePikachu said:
after you install the r&d tool and lgmobilelax you just have to run the batch in method 3 and everything should be done automatically
Click to expand...
Click to collapse
my dear god, it worked :laugh::laugh::laugh: everything is there !!!! thank you thank you thabk you !
Now i want to install a custom google like ROM something like EHNDROIX V. What do i do so i dont go in to troubles again ? The devices returned to be not rooted, guess that comes first. Than maybe custom recovery suitable for 4.4.2?
Android-rocks said:
my dear god, it worked :laugh::laugh::laugh: everything is there !!!! thank you thank you thabk you !
Now i want to install a custom google like ROM something like EHNDROIX V. What do i do so i dont go in to troubles again ? The devices returned to be not rooted, guess that comes first. Than maybe custom recovery suitable for 4.4.2?
Click to expand...
Click to collapse
sorry I am repairing a desktop, for root use ioroot25 and for recovery AutoRec as for endroix give me a couple minutes to look into the rom and see if you need anything special before flashing
---------- Post added at 04:22 PM ---------- Previous post was at 04:11 PM ----------
Android-rocks said:
my dear god, it worked :laugh::laugh::laugh: everything is there !!!! thank you thank you thabk you !
Now i want to install a custom google like ROM something like EHNDROIX V. What do i do so i dont go in to troubles again ? The devices returned to be not rooted, guess that comes first. Than maybe custom recovery suitable for 4.4.2?
Click to expand...
Click to collapse
ok for flashing rom download d802 modem and rom, then flash the modem then the rom or flash rom and then modem it's up to you and reboot you should have endroix installed and rotation/other stuff should also work
XxZombiePikachu said:
sorry I am repairing a desktop, for root use ioroot25 and for recovery AutoRec as for endroix give me a couple minutes to look into the rom and see if you need anything special before flashing
---------- Post added at 04:22 PM ---------- Previous post was at 04:11 PM ----------
ok for flashing rom download d802 modem and rom, then flash the modem then the rom or flash rom and then modem it's up to you and reboot you should have endroix installed and rotation/other stuff should also work
Click to expand...
Click to collapse
Thank you, thanks a lot.
Rooting worked, checked it afterwards with an root check app.
Also installed the AutoRec successfully with the apk file, i did run it after inszallation and everything. But i want to test it whether it is there, how can i check it? I held the power+down keys but its an white screen: "Factory hard reset" below it: "Permanently Erase user Data & Reset settings?" and below this: "Press power key to confirm, and any other key to cancel". Seems not like recovery with a lot of options touch buttons and things. How can i check for correct installation of the AutoRec?
Android-rocks said:
Thank you, thanks a lot.
Rooting worked, checked it afterwards with an root check app.
Also installed the AutoRec successfully with the apk file, i did run it after inszallation and everything. But i want to test it whether it is there, how can i check it? I held the power+down keys but its an white screen: "Factory hard reset" below it: "Permanently Erase user Data & Reset settings?" and below this: "Press power key to confirm, and any other key to cancel". Seems not like recovery with a lot of options touch buttons and things. How can i check for correct installation of the AutoRec?
Click to expand...
Click to collapse
oh to confirm if custom recovery installed correctly on the factory reset screen click power button 3 times and it should boot into custom recovery or download an app from playstore like rom manager and use the option reboot into recovery
XxZombiePikachu said:
oh to confirm if custom recovery installed correctly on the factory reset screen click power button 3 times and it should boot into custom recovery or download an app from playstore like rom manager and use the option reboot into recovery
Click to expand...
Click to collapse
Is this the way with 3 times power press and the place from where how i flash the modem, the rom and the rom apps?
Android-rocks said:
Is this the way with 3 times power press and the place from where how i flash the modem, the rom and the rom apps?
Click to expand...
Click to collapse
you boot into custom recovery by turning phone off then hold volume down+power it will show factory reset screen then press power button three times and it should boot into custom recovery from there you wipe data/dalvik/cache then flash modem/rom/gapps and reboot
thrust heuralt
XxZombiePikachu said:
you boot into custom recovery by turning phone off then hold volume down+power it will show factory reset screen then press power button three times and it should boot into custom recovery from there you wipe data/dalvik/cache then flash modem/rom/gapps and reboot
Click to expand...
Click to collapse
Thank you dear XxZombiePikachu! It worked all fantastic, the new google rom as well :victory::victory:
I also did, as suggested from the modem thread, also EFS backup before doing the modem update. The thread for this is:
http://forum.xda-developers.com/showthread.php?t=2451390
All worked very nice And after all i didnt ditched the bricked LG Thank you thanks once again! It is good to be here!
Android-rocks said:
Thank you dear XxZombiePikachu! It worked all fantastic, the new google rom as well :victory::victory:
I also did, as suggested from the modem thread, also EFS backup before doing the modem update. The thread for this is:
http://forum.xda-developers.com/showthread.php?t=2451390
All worked very nice And after all i didnt ditched the bricked LG Thank you thanks once again! It is good to be here!
Click to expand...
Click to collapse
Don't forget to edit thread name to say solved and glad I could help
Sent from my LG-D800 running stock kk, rooted with philz using XDA app
XxZombiePikachu said:
Don't forget to edit thread name to say solved and glad I could help
Sent from my LG-D800 running stock kk, rooted with philz using XDA app
Click to expand...
Click to collapse
I am sorry i tried but couldnt figure out, how can be the title changed?
Android-rocks said:
I am sorry i tried but couldnt figure out, how can be the title changed?
Click to expand...
Click to collapse
edit the title of the first post and it will change the name of the thread
XxZombiePikachu said:
edit the title of the first post and it will change the name of the thread
Click to expand...
Click to collapse
I tried by editing the pot but couldnt figure out where to edit the title of the first post, how do you do that?
Android-rocks said:
I tried by editing the pot but couldnt figure out where to edit the title of the first post, how do you do that?
Click to expand...
Click to collapse
Click on edit/delete on your first post, click on advanced and you should be able to edit title there
Sent from my LG-D800 running stock kk, rooted with philz using XDA app

[Q] LG G2 bricked and can't flash stock firmware!

So I'm really into Android developing, I'm always flashing and installing etc, but I got a problem now.
Phone information​
LG G2 D802
Rooted
TWRP Recovery 2.7.0.0
Was running 4.4.2, found a kdz file on the internet and flashed it (no regular update from my phone)
What happened​I actually did something stupid, I received an application update from the LG Download Center (or whatever it's called) on my phone and clicked on it. I was planning on flashing Android 4.4.2 again because my firmware was not stable, and I thought this update could help me.
But no, after it finished downloading, I automatically booted into recovery.
What I did​So I tried to reboot and enter my OS, but unfortunately, I was stuck in recovery.
I did everything I could, wiping (Dalvik) cache, factory reset, flashed a new rom, restored Nandroid backup, but no, every time I booted, I got back into recovery again.
I only saw 1 option left, booting into download mode and flashing a new firmware.
I found the Netherlands 16GB kdz file for Android 4.4.2 (because I had a French one first), the one I was looking for.
Looked all over the internet, and all guides pointed me to this guide.
Tried it, but I got multiple errors, one of them was that my phone was not connected while I was at 15% of the flash process.
What happened​After that first flashing process, I booted up, but got a Security Error. After the Security Error was showing for 5 seconds, my phone shut down. This is happening every time I try to boot up.
I couldn't access my recovery anymore, nothing. Edit: I can access my recovery right now, and I tried this, but when I boot up I get the Security Error again.
The big problem right now is the Security Error! How do I bypass that?
So can someone please help me out!
Several phones/tablets of mine bricked and I always found a way to get out of it, but not this time, unfortunately...
Have you tried this
Sent from LG-G2 D800 on AEONFLEX 4.4.2
XxZombiePikachu said:
Have you tried this
Sent from LG-G2 D800 on AEONFLEX 4.4.2
Click to expand...
Click to collapse
Yes, I actually have. Didn't mention it, but after I did that I booted and got an LG logo and below it was a text that said 'Security Error' After like 5 seconds the security error goes away and my phone shuts down. I can only enter download mode right now.
I'll edit my first post with this info.
Thanks for the help though!
Edit: I find a way to access my recovery again because at first I couldn't but I figured out that the code in the thread you linked was a bit different than the code I entered at first.
So I used the code you gave me, but now I get the Security Error again!
Hi mate, just like you i downloaded that damn OTA today and messed up my phone, but in my case was because i had totally forgotten it was rooted and had custom recovery installed :silly::silly::silly::silly:
I followed this tutorial to fix the boot secure error http://forum.xda-developers.com/showthread.php?t=2582142 and it worked like a charm except for download mode wasn't working at all.
After doing some research i found this post http://forums.androidcentral.com/ge...ricked-lg-g2-stuck-twrp-no-download-mode.html and got download mode (apparently) working again but Windows didn't recognize it at all so i couldn't use it to flash the .kdz stock firmware.
In the end i just flashed a custom aosp rom and got my phone back to life but the download mode issue it's still there and it's bothering me quite a lot.
Any suggestion is welcome.
EDIT: Don't download the recovery from the post, instead look for the latest version (2.7.0.0) because the one posted there (2.6.3.2) might corrupt your partitions
evilruck said:
Hi mate, just like you i downloaded that damn OTA today and messed up my phone, but in my case was because i had totally forgotten it was rooted and had custom recovery installed :silly::silly::silly::silly:
I followed this tutorial to fix the boot secure error http://forum.xda-developers.com/showthread.php?t=2582142 and it worked like a charm except for download mode wasn't working at all.
After doing some research i found this post http://forums.androidcentral.com/ge...ricked-lg-g2-stuck-twrp-no-download-mode.html and got download mode (apparently) working again but Windows didn't recognize it at all so i couldn't use it to flash the .kdz stock firmware.
In the end i just flashed a custom aosp rom and got my phone back to life but the download mode issue it's still there and it's bothering me quite a lot.
Any suggestion is welcome.
EDIT: Don't download the recovery from the post, instead look for the latest version (2.7.0.0) because the one posted there (2.6.3.2) might corrupt your partitions
Click to expand...
Click to collapse
Thanks! But does my internal storage get whiped? Will all my pictures etc. be gone?
And the first thred removes the security error right? And after that I can just boot into recovery mode (I can boot in recovery btw) and flash a new rom? Just wanted to know this so I don't go through all that trouble for nothing
Edit: You know I can enter both download and recovery mode right?
Ibrahim9999 said:
Thanks! But does my internal storage get whiped? Will all my pictures etc. be gone?
And the first thred removes the security error right? And after that I can just boot into recovery mode (I can boot in recovery btw) and flash a new rom? Just wanted to know this so I don't go through all that trouble for nothing
Edit: You know I can enter both download and recovery mode right?
Click to expand...
Click to collapse
Nope internal SD remains intact, basically what you'll be doing is pushing the right files into the system partitions and yes, in theory you should be able to flash a new rom.
Even if you can boot into recovery you should do it if you're getting that error, and after that you can just push a ROM file to flash (i'll assume you know how to do it) and btw let me know if you decide to flash a stock based rom instead of an aosp like i did.
Good luck with that :good:
evilruck said:
Nope internal SD remains intact, basically what you'll be doing is pushing the right files into the system partitions and yes, in theory you should be able to flash a new rom.
Even if you can boot into recovery you should do it if you're getting that error, and after that you can just push a ROM file to flash (i'll assume you know how to do it) and btw let me know if you decide to flash a stock based rom instead of an aosp like i did.
Good luck with that :good:
Click to expand...
Click to collapse
Thanks man! I'm probably going to save money because of you, awesome!
Ibrahim9999 said:
Thanks man! I'm probably going to save money because of you, awesome!
Click to expand...
Click to collapse
I hope so!
Let me know if you fix the thing :laugh:
evilruck said:
I hope so!
Let me know if you fix the thing :laugh:
Click to expand...
Click to collapse
I just managed to fix it! Thank you so much man!
Can someone help me plz I got flashily got CWM instead of the TWRP and got and lg update it updated and now it's stuck in recovery mode it won't go into download mode it only goes to recovery mode and my computer won't recognize my phone so if any one knows how to fix it can you plz help me out
my pc don't recognize the lg g2 in download mode!
i installed the drivers and the USB is connected but the pc don;t even say that the device is connected . and nothing in device manager at all
Perhaps you might consider sending it in to lg if you still have warranty. But I'd you don't, there are services on eBay/ Craigslist that can help you.
Sent from my LG-D800 using XDA Free mobile app

Having an impossible time flashing CM11 rom, been at it for hours please HELP

This used to be easy.
After 8 hours yesterday I think I managed to root the phone. CWM/TWRP will not install. At all, under any method. Rom manager, goo manager, I now get this stupid message that says that "an application attempted to access something unauthorized and has been blocked" over and over.
Just trying to flash CM11 rom. Guess I need to learn how to sideload or something? I physically can't get my phone to recovery mode other than the stock Android, which does not have the "flash zip from sdcard" option.
For the love of god help me. My phone stopped working around 2 pm yesterday and I seriously can't believe I'm about to be going into day 2 of this, so rather than drive myself crazy i'm going to wait for help
bump please help should be simple
Hi,
Please, don't panic! Panic is your worst enemy . First, give a good read here: http://forum.xda-developers.com/showthread.php?t=2419762. Then try again . It's very likely Knox is blocking your TWRP/CWM installation, that's why you receive this message.
All the best,
~Lord
XxLordxX said:
Hi,
Please, don't panic! Panic is your worst enemy . First, give a good read here: http://forum.xda-developers.com/showthread.php?t=2419762. Then try again . It's very likely Knox is blocking your TWRP/CWM installation, that's why you receive this message.
All the best,
~Lord
Click to expand...
Click to collapse
thanks
knox is disabled
root is gained
su is installed
rom manager and goo manager installed
when i downloaded the CM rom from goo manager and try to install it, the phone restarts in download mode and just sits there...
Damani311 said:
thanks
knox is disabled
root is gained
su is installed
rom manager and goo manager installed
when i downloaded the CM rom from goo manager and try to install it, the phone restarts in download mode and just sits there...
Click to expand...
Click to collapse
Hi,
You need to flash the recovery via Odin . After flashing the recovery via Odin you'll be able to flash the ROM normally .
All the best,
~Lord
XxLordxX said:
Hi,
You need to flash the recovery via Odin . After flashing the recovery via Odin you'll be able to flash the ROM normally .
All the best,
~Lord
Click to expand...
Click to collapse
tried flashing four different CWM tars, all are failing.
XxLordxX said:
Hi,
You need to flash the recovery via Odin . After flashing the recovery via Odin you'll be able to flash the ROM normally .
All the best,
~Lord
Click to expand...
Click to collapse
tried flashing four different CWM tars, all are failing.
also trying to flash TWRP
its just all failing on the install
Hi,
Please post your installation issue on the Galaxy S4 Help Thread there might be someone better than me to help you there. Also are you sure you're flashing the right files and using the right method? Did you try another USB Cable? Did you try another Odin version? It all can contribute to the fail.
~Lord
XxLordxX said:
Hi,
Please post your installation issue on the Galaxy S4 Help Thread there might be someone better than me to help you there. Also are you sure you're flashing the right files and using the right method? Did you try another USB Cable? Did you try another Odin version? It all can contribute to the fail.
~Lord
Click to expand...
Click to collapse
its the official samsung cable. and yes i tried others
tried other versions of odin as well
and different versions of both twrp and cwm
its crazy i tells ya xD
If it fails to flash true Odin, then you are doing something wrong.
- Different pc
- Reinstall drivers
- Different cable
- Different usb port
- Make sure kies is not running in the background
What are you running? Windows 8? Try a windows 7 pc.
Post the details of the error you are getting.
Also when the flash goes succesfull, but you still don't have a custom recovery, then uncheck auto-reboot.
can someone please link me to a guaranteed working version of a flashable recovery for odin ?
I know its a lot to ask but I've actually gone through almost that entire list you listed
tried diff cables
no kies runnning
on windows 7
drivers been installed twice
maybe i should try the other port, but in case that doesnt work can anyone just link me? sorry i've just never had this much problems with this, must be b/c of the new security knox update or w/e in oct of last year. Last June I did all this in about 15 minutes....
I had the same trouble with the knox crap yesterday, the only way I could get it rooted and/or with custom recovery was to use the Cyanogen windows installer, then when CM booted I then rebooted into recovery and installed a different rom from there. :good:
dwarfer66 said:
I had the same trouble with the knox crap yesterday, the only way I could get it rooted and/or with custom recovery was to use the Cyanogen windows installer, then when CM booted I then rebooted into recovery and installed a different rom from there. :good:
Click to expand...
Click to collapse
that's crazy
so where do i find this windows installer? i'm just trying to put CM on there so I suppose this would work
Hi i know youve already said said its officail cable but im saying try another different s4 cable. Because when i was installing recovery or anything it wouldnt let me (i thought i had original white s4 cable) but then i got my dads cable (hes gt s4) and it worked instantly. These fake cables are at large and its very very difficult to tell if its original.
Also like previous guy said using a different computer/laptop also helps i know because ive flashed my phones since day 1.
GL and plz let me know if u managed to fix it another way as its always good to try new options when others fail.
189cutter said:
Hi i know youve already said said its officail cable but im saying try another different s4 cable. Because when i was installing recovery or anything it wouldnt let me (i thought i had original white s4 cable) but then i got my dads cable (hes gt s4) and it worked instantly. These fake cables are at large and its very very difficult to tell if its original.
Also like previous guy said using a different computer/laptop also helps i know because ive flashed my phones since day 1.
GL and plz let me know if u managed to fix it another way as its always good to try new options when others fail.
Click to expand...
Click to collapse
alright it'd be awesome if someone can post a link to the files the work, for sure.
CM windows installer
CWM odin tar file
TWRP odin tar file
Damani311 said:
alright it'd be awesome if someone can post a link to the files the work, for sure.
CM windows installer
CWM odin tar file
TWRP odin tar file
Click to expand...
Click to collapse
http://www.cyanogenmod.org/ then click the start button and follow the instructions.
It will get you to download the installer (or http://dist01.slc.cyngn.com/CMInstaller.msi?t=1403660099360) the click it to run, It may download an update for itself, then it will download recovery, operating system, gapps, then start to install everything. About 300mb altogether.
That way you don't need the tar files, just search on this sight for flashable from recovery for the recovery files you want. (I use the touch versions myself).
dwarfer66 said:
http://www.cyanogenmod.org/ then click the start button and follow the instructions.
It will get you to download the installer (or http://dist01.slc.cyngn.com/CMInstaller.msi?t=1403660099360) the click it to run, It may download an update for itself, then it will download recovery, operating system, gapps, then start to install everything. About 300mb altogether.
That way you don't need the tar files, just search on this sight for flashable from recovery for the recovery files you want. (I use the touch versions myself).
Click to expand...
Click to collapse
thanks, but naturally this would be too easy
says: "not supported on your device"
a freaking S4 AT&T! what the ****?
From what I've read AT&T have locked bootloaders. Glad I have an unlocked Australian version!
Yeah so if anyone can still find a way to help me that'd be awesome. Wasted two days already and rather not be stuck with stock
Damani311 said:
Yeah so if anyone can still find a way to help me that'd be awesome. Wasted two days already and rather not be stuck with stock
Click to expand...
Click to collapse
So do you have an AT&T phone? If you do, you are in the wrong section of the forum.

Tried FlashFire twice , no good...

I have a S4, I337 AT&T device and I think I bricked it by trying to install TWRP, it didn't work... I was trying Muniz_ri's "Update to i337 ok2 5.0.1 and keep root", I couldn't get the Flashfire to load, lots of stuff about rooting and no Supersu something... Any help..?
If you i337 is not on mdl or mdb bootloader you can not install TWRP.
If you phone is brick how could you install the flash fire?
Flashfire works well with stock rom. Are you on custom rom?
In note section of the muniz_is post , the #4 stated that "4. If you are not already rooted (or to unbrick) you must first flash the I337UCUFNB1_Rootable_Full_Odin.tar (use Odin's PDA slot (AP in Odin v3.09+), root with Towelroot, then proceed with the above process." . Did you follow that step?
sway8966 said:
If you i337 is not on mdl or mdb bootloader you can not install TWRP.
If you phone is brick how could you install the flash fire?
Flashfire works well with stock rom. Are you on custom rom?
In note section of the muniz_is post , the #4 stated that "4. If you are not already rooted (or to unbrick) you must first flash the I337UCUFNB1_Rootable_Full_Odin.tar (use Odin's PDA slot (AP in Odin v3.09+), root with Towelroot, then proceed with the above process." . Did you follow that step?
Click to expand...
Click to collapse
I'm on 5.0.1 Lollipop, the second one From Aug 11 OTA by the seller I bought it from.... I was new to android and didn't know there was a download mode....
The baseband version is: I think it is called I337OCOG0C4... It is the stock rom that came on the phone.... I can't find the stock ROM to redo it( try to at least...) It's on 0C4... I AM rooted , by Kingroot... Verification says so.... Two different versifiers... When I go to flash..., it comes up with that message... I tried removing Busy box and reinstalling it... it was ok... I reinstalled Safestrap .... It loaded fine...
When I got to NC1 flash..., it says it can't see busy box or safestrap, either one might have a problem... They both loaded fine..... I tried flashing the Tar from above... Odin just sat there and finally said fail... twice.... I think the corruption is hurting the ability to enter recovery on the phone.... I can't enter "Recovery Mode" on the phone... It is damaged.... I thought flashing could do it...
lentmain said:
I'm on 5.0.1 Lollipop, the second one From Aug 11 OTA by the seller I bought it from.... I was new to android and didn't know there was a download mode....
The baseband version is: I think it is called I337OCOG0C4... It is the stock rom that came on the phone.... I can't find the stock ROM to redo it( try to at least...) It's on 0C4... I AM rooted , by Kingroot... Verification says so.... Two different versifiers... When I go to flash..., it comes up with that message... I tried removing Busy box and reinstalling it... it was ok... I reinstalled Safestrap .... It loaded fine...
When I got to NC1 flash..., it says it can't see busy box or safestrap, either one might have a problem... They both loaded fine..... I tried flashing the Tar from above... Odin just sat there and finally said fail... twice.... I think the corruption is hurting the ability to enter recovery on the phone.... I can't enter "Recovery Mode" on the phone... It is damaged.... I thought flashing could do it...
Click to expand...
Click to collapse
If you followed Muniz_is instruction step by step I don't think you should have a problem.
I used SS (safestrap) when I was in kit-kat alot but not anymore. It is tricky to use SS in lollipop. So I can not give you any comment on using SS. I use flashfire app instead.
So every time I want to install the custom rom, I followed Muniz_is instructions. Odin the NB1, use towelroot to root, install flashfire and flash the rooted OC4, install flashfire again and then flash the custom rom.
Muniz_is post is updated to OK2 but I am still using the OC4 files that posted previously. If you want to stay on OC4 do let me know.
What do you mean you can not enter recovery mode? I am sure you know the key sequence (press power+home+volume up) for recovery mode. If your phone is bricked, then you need to press the same keys for at least 10 sec and then let the power button go but keep pressing the home+volume-up until you felt the phone vibrate and see the small blue label at the top of the screen.
To use the odin you have to be in the download mode. To get to the download mode you need to press power+home+volume-down.
sway8966 said:
If you followed Muniz_is instruction step by step I don't think you should have a problem.
I used SS (safestrap) when I was in kit-kat alot but not anymore. It is tricky to use SS in lollipop. So I can not give you any comment on using SS. I use flashfire app instead.
So every time I want to install the custom rom, I followed Muniz_is instructions. Odin the NB1, use towelroot to root, install flashfire and flash the rooted OC4, install flashfire again and then flash the custom rom.
Muniz_is post is updated to OK2 but I am still using the OC4 files that posted previously. If you want to stay on OC4 do let me know.
What do you mean you can not enter recovery mode? I am sure you know the key sequence (press power+home+volume up) for recovery mode. If your phone is bricked, then you need to press the same keys for at least 10 sec and then let the power button go but keep pressing the home+volume-up until you felt the phone vibrate and see the small blue label at the top of the screen.
To use the odin you have to be in the download mode. To get to the download mode you need to press power+home+volume-down.
Click to expand...
Click to collapse
Your recovery mode probably works fine.... Mine is corrupt... You must use Recovery mode in Odin... I tried... Failed twice... Tried 4 other .tar's.... No good... A FAIL for each... I guess you have to have Recovery Mode just to allow the device to do anything... I DO appreciate you guys and ALL of your efforts ...... Maybe we could put my device on Android Studio and look at what is hurting it... I'd love that....
I had got myself into same mess in early January 2016 but I got out and all is working perfectly fine with me. Can you successfully get your i337 into download mode? if YES contact me via PM and I can tell you exact steps I performed to get myself back into fully working condition. Believe me it's simple steps not rocket science - just that one needs to perform very carefully.
To get to the download mode you need to press power+home+volume-down.
lentmain said:
Your recovery mode probably works fine.... Mine is corrupt... You must use Recovery mode in Odin... I tried... Failed twice... Tried 4 other .tar's.... No good... A FAIL for each... I guess you have to have Recovery Mode just to allow the device to do anything... I DO appreciate you guys and ALL of your efforts ...... Maybe we could put my device on Android Studio and look at what is hurting it... I'd love that....
Click to expand...
Click to collapse
blablu said:
I had got myself into same mess in early January 2016 but I got out and all is working perfectly fine with me. Can you successfully get your i337 into download mode? if YES contact me via PM and I can tell you exact steps I performed to get myself back into fully working condition. Believe me it's simple steps not rocket science - just that one needs to perform very carefully.
To get to the download mode you need to press power+home+volume-down.
Click to expand...
Click to collapse
Neither device will boot into Recovery mode... It gives 5 or 6 lines of stuff..., then freezes up... I can release it to use the phone... I'd like to try using Android Studio to see what can be done...
Isn't there a "Format" system and re-installation plan I can use..., like doing a computers hard drive..?
Recovery mode is different - it is WAY different - it will never boot into that mode as memory is messed up with wrong code.
I AM ASKING YOU TO GET IT INTO DOWNLOAD MODE - to get into download mode - the messed code is not executed....Try to get into DOWNLOAD MODE - i am 100% sure - it will go into download mode....It should....
lentmain said:
Neither device will boot into Recovery mode... It gives 5 or 6 lines of stuff..., then freezes up... I can release it to use the phone... I'd like to try using Android Studio to see what can be done...
Isn't there a "Format" system and re-installation plan I can use..., like doing a computers hard drive..?
Click to expand...
Click to collapse
blablu said:
Recovery mode is different - it is WAY different - it will never boot into that mode as memory is messed up with wrong code.
I AM ASKING YOU TO GET IT INTO DOWNLOAD MODE - to get into download mode - the messed code is not executed....Try to get into DOWNLOAD MODE - i am 100% sure - it will go into download mode....It should....
Click to expand...
Click to collapse
I have told you....." I pressed up vol, home and start at the same time... That should have started Recovery Mode... It didn't... It froze up at the little green man screen...."
MY DOWNLOAD MODE IS CORRUPT..... I can't figure another way around this....
If someone knew how to view the devices program on Android Studio..., MAYBE something could be done with the programming.... I'm not sure if a "Cut and Paste " would work on there... I guess I need to get a book on Android Studio... I already have it ( Android Studio SDK ) on my computer....
Any one here can tell me how to run it..?
Ok.
can you tell me what exactly happens when you press power+home+volume-down?
How did u arrive to conclusion that your download mode is corrupted?
lentmain said:
I have told you....." I pressed up vol, home and start at the same time... That should have started Recovery Mode... It didn't... It froze up at the little green man screen...."
MY DOWNLOAD MODE IS CORRUPT..... I can't figure another way around this....
If someone knew how to view the devices program on Android Studio..., MAYBE something could be done with the programming.... I'm not sure if a "Cut and Paste " would work on there... I guess I need to get a book on Android Studio... I already have it ( Android Studio SDK ) on my computer....
Any one here can tell me how to run it..?
Click to expand...
Click to collapse
blablu said:
Ok.
can you tell me what exactly happens when you press power+home+volume-down?
How did u arrive to conclusion that your download mode is corrupted?
Click to expand...
Click to collapse
It froze up.... It stopped moving foward to the lower potion of the Recovery program.... At the bottom..., you can choose the different ways to manipulate the program... Mine, both phone stop at the processing sign in....
It will require something more than a few buttons being pressed.... I'll have to learn to use the Android Studio and either rebuild the program from within or to reprogram it from outside..., like with a .tar flash....
blablu said:
Ok.
can you tell me what exactly happens when you press power+home+volume-down?
How did u arrive to conclusion that your download mode is corrupted?
Click to expand...
Click to collapse
I reflashed an At&t .pit file ( using Odin) and it rebuilt my file ( partition) for Recovery mode... Not sure how it did it... Now when I CAN get into recovery mode..., it doesn't recognize the SD card so I can't use the tools in Recovery mode to change the rom to something earlier, like Muniz_ri did in one of his wonderful fixes... (Double thanks Muniz_ri..)
Once Odin sees my device..., I set it up yo start a Muniz_ri renewing rom ( I337UCUFNB1_TWROOTABLE_FULL_ODIN.tar.md5 ) and it gets to "system.img.ext4" about 10% into it and then it freezes up....
Anyone have any ideas..?
If u are able to get to download mode - I strongly recommend first you flash ONLY Stock Partition file.
Then again reboot in download mode and then try the FNB1 file....this may work...but before all this flash proper pit file - refer to http://forum.xda-developers.com/showthread.php?t=2496517
stock partition file(s) are available on xda - search and download....
lentmain said:
I reflashed an At&t .pit file ( using Odin) and it rebuilt my file ( partition) for Recovery mode... Not sure how it did it... Now when I CAN get into recovery mode..., it doesn't recognize the SD card so I can't use the tools in Recovery mode to change the rom to something earlier, like Muniz_ri did in one of his wonderful fixes... (Double thanks Muniz_ri..)
Once Odin sees my device..., I set it up yo start a Muniz_ri renewing rom ( I337UCUFNB1_TWROOTABLE_FULL_ODIN.tar.md5 ) and it gets to "system.img.ext4" about 10% into it and then it freezes up....
Anyone have any ideas..?
Click to expand...
Click to collapse

Help !! *Bricked S10+ Andriod 9.0*

So, I had a rooted S10+ , using Magisk root. Running andriod 9.0, Recently i used an app from google store to put an installed apk file into /system/apps, And then I reeboted voila, The mobile keeps bootlooping into the screen where it says "Samsung galaxy s10+ Secured by Knox, " and the light of the screen dims,... And Restarts after a while.
I AM ABLE TO get into RECOVERY MODE. Tried Wiping data and Cache.
I TRIED GOING INTO DOWNLOAD MODE. BUT it doesnt work. Tried inserting the Cable, powering off via Recovery and then Tried Vol Down + Bixby +Power,
Everything, But wont go into Download mode.
I do know a little about rooting and stuff .. I mean i can use Odin .. I have the firmwares for the device, Is there a way to Install the Firmware using sd card? or like What do i do next? IM Literally Panicking.. I mean the device is pretty new and expensive XD.
Im gonna leave it for the night to i guess drain out of battery.. Please help. What should i do next.
Please Help, I just know this forums ive been here since idk joined it back then.. Please i need help from someone or ima literally die of heart attack
[U$AMA said:
*;81748367]So, I had a rooted S10+ , using Magisk root. Running andriod 9.0, Recently i used an app from google store to put an installed apk file into /system/apps, And then I reeboted voila, The mobile keeps bootlooping into the screen where it says "Samsung galaxy s10+ Secured by Knox, " and the light of the screen dims,... And Restarts after a while.
I AM ABLE TO get into RECOVERY MODE. Tried Wiping data and Cache.
I TRIED GOING INTO DOWNLOAD MODE. BUT it doesnt work. Tried inserting the Cable, powering off via Recovery and then Tried Vol Down + Bixby +Power,
Everything, But wont go into Download mode.
I do know a little about rooting and stuff .. I mean i can use Odin .. I have the firmwares for the device, Is there a way to Install the Firmware using sd card? or like What do i do next? IM Literally Panicking.. I mean the device is pretty new and expensive XD.
Im gonna leave it for the night to i guess drain out of battery.. Please help. What should i do next.
Please Help, I just know this forums ive been here since idk joined it back then.. Please i need help from someone or ima literally die of heart attack
Click to expand...
Click to collapse
Well let's try two things
If your data is important to you try to install custom ROM via TWRP
And if not try to reset factory from TWRP
I don't think that you BRICKED! your phone
It only causes from flashing wrong model firmware
And I think the best way is install custom ROM(do a full wipe)(see completely clear tutorial videos to install it right)and after system booted you can install stock ROM again
---------- Post added at 05:10 AM ---------- Previous post was at 05:07 AM ----------
If all the things go wrong
At if your completely know that you BRICKED it(that I don't think) you can easily request debrick.img and install it from SD card
So be relax dude
It would be great experience for you to save your phone
[U$AMA]* said:
So, I had a rooted S10+
Click to expand...
Click to collapse
amirizad_7436 said:
---------- Post added at 05:10 AM ---------- Previous post was at 05:07 AM ----------
Click to expand...
Click to collapse
Hi Mate
What app did you install?
Did you try the advice from amirizad_7436 ?
[U$AMA]* said:
So, I had a rooted S10+ , using Magisk root. Running andriod 9.0, Recently i used an app from google store to put an installed apk file into /system/apps, And then I reeboted voila, The mobile keeps bootlooping into the screen where it says "Samsung galaxy s10+ Secured by Knox, " and the light of the screen dims,... And Restarts after a while.
I AM ABLE TO get into RECOVERY MODE. Tried Wiping data and Cache.
I TRIED GOING INTO DOWNLOAD MODE. BUT it doesnt work. Tried inserting the Cable, powering off via Recovery and then Tried Vol Down + Bixby +Power,
Everything, But wont go into Download mode.
I do know a little about rooting and stuff .. I mean i can use Odin .. I have the firmwares for the device, Is there a way to Install the Firmware using sd card? or like What do i do next? IM Literally Panicking.. I mean the device is pretty new and expensive XD.
Im gonna leave it for the night to i guess drain out of battery.. Please help. What should i do next.
Please Help, I just know this forums ive been here since idk joined it back then.. Please i need help from someone or ima literally die of heart attack
Click to expand...
Click to collapse
I assume that you must have installed magisk module like app systemizer or any other like that to convert system app?
Just have to uninstall certain module from twrp using twrp file manager. Reboot it will boot.
OR
You can use read my thread in guide section " upgrade downgrade without losing data" i mentioned in detail and also some links to ready magisk patched firmwares.
New Weird ****
So Thank you so much for replying, It gave me hope , I went to a Fixit guy, He I HAVE TOTALLY NO IDEA What he did,
Since i couldnt reach Download Mode, I got him to fix it, now ...
I am running my phone. Everything looks good, The warning of root at the start disappeared and the software starts normally.
There is 1 issue. I am still unable to run samsung secure folder (type apps , i think its because i did once root the phone), Secondly.
I updated my Phone to the new Andriod version and it bricked again ? (got restored by the same guy again), So like , can someone tell me what might be causing this ?
Should i Enable Debug, Go download mode and Reinstall the Original Firmware that I patched before with magisk? like (I compared the Baseband version and Build Version of the new installed software its not same as my original phone ? Maybe this is causing it not to software update? )
I dunno The Sideefffects of once rooting the phone? I mean can i ever get the old default non rooted phone back? I hope you someone understands what im trying to ask ? Like Should i Default firmware it ? or just keep using it ? will i gain something? like Will i be able to update the software?
(NOTE: I dont need root anymore . Im done with it.)
[U$AMA]* said:
So Thank you so much for replying, It gave me hope , I went to a Fixit guy, He I HAVE TOTALLY NO IDEA What he did,
Since i couldnt reach Download Mode, I got him to fix it, now ...
I am running my phone. Everything looks good, The warning of root at the start disappeared and the software starts normally.
There is 1 issue. I am still unable to run samsung secure folder (type apps , i think its because i did once root the phone), Secondly.
I updated my Phone to the new Andriod version and it bricked again ? (got restored by the same guy again), So like , can someone tell me what might be causing this ?
Should i Enable Debug, Go download mode and Reinstall the Original Firmware that I patched before with magisk? like (I compared the Baseband version and Build Version of the new installed software its not same as my original phone ? Maybe this is causing it not to software update? )
I dunno The Sideefffects of once rooting the phone? I mean can i ever get the old default non rooted phone back? I hope you someone understands what im trying to ask ? Like Should i Default firmware it ? or just keep using it ? will i gain something? like Will i be able to update the software?
(NOTE: I dont need root anymore . Im done with it.)
Click to expand...
Click to collapse
Once rooted, secure folder will not work anymore. If you are using Android 9 then use custom ROM because there is fixes there for Secure Folder. If on Android 10 then forget about it and wait until dev fix.
And for other questions, it sounds like you are newbie and didn't know anything about it until now. I would suggest to read some article here, explore about some magisk that what its, Bootloader ... how to unlock Bootloader etc. Trust me one day you will become dev. Good Luck
What i am asking is, I think something is wrong. I cant use Netflix , It was working before (when rooted), So i want to know, Should i Use ODIN to Put my Original (UNPATCHED) Firmware in this phone?
And If i do agree to proceed, (My Boot loader is unlocked permanently btw in developer options),
I just have to put it on download, connect pc open odin add the original files and run it ? and when start wipe data and cache. is that is ? Am i missing something can you please confirm sir? and these files only right?
"AP, BL, CP and CSC (I also have HOME file should i also attach that?)
Can you recommend me a tutorial to follow via odin, Restoring my Original Firmware back ? In s10+ please? Ill be grateful to you.

Categories

Resources