Hello friends, i was wondering if it's posible to disable hw keys, found lots of tutorials and flashables zips through forums but none of them worked
I'm currently running PA 4
Any help?
robertostorm said:
Hello friends, i was wondering if it's posible to disable hw keys, found lots of tutorials and flashables zips through forums but none of them worked
I'm currently running PA 4
Any help?
Click to expand...
Click to collapse
What I did for me because I wanted to disable the return soft key ; it was a pain when in camera mode it always closed the application.
I installed UDN first as replacement see result in post 1273.
http://forum.xda-developers.com/showthread.php?t=2270198&page=128
AND then I followed instructions given at this link: post 7
http://forum.xda-developers.com/galaxy-s3/themes-apps/mod-how-to-enable-soft-keys-t1960460
Good luck
lolo9393 said:
What I did for me because I wanted to disable the return soft key ; it was a pain when in camera mode it always closed the application.
I installed UDN first as replacement see result in post 1273.
http://forum.xda-developers.com/showthread.php?t=2270198&page=128
AND then I followed instructions given at this link: post 7
http://forum.xda-developers.com/galaxy-s3/themes-apps/mod-how-to-enable-soft-keys-t1960460
Good luck
Click to expand...
Click to collapse
Man..i know how to enable soft keys..what i want is a way to disable HW keys, i keep presing them accidentally
robertostorm said:
Man..i know how to enable soft keys..what i want is a way to disable HW keys, i keep presing them accidentally
Click to expand...
Click to collapse
TO DISABLE them spend some time to read the second link!
Quote:
AND then I followed instructions given at this link: post 7
http://forum.xda-developers.com/gala...-keys-t1960460
OK Man!
lolo9393 said:
TO DISABLE them spend some time to read the second link!
Quote:
AND then I followed instructions given at this link: post 7
http://forum.xda-developers.com/gala...-keys-t1960460
OK Man!
Click to expand...
Click to collapse
already done, saved & rebooted, they're still working
That sound very strange,like your file modification isn't taken into consideration by the SW.
this worked very fine for me, i am (still) with Prism 4.3 Rom and may be 4.4 is different at this point.
If you have time to investigate this will avoid me to rush on moving to fresh KK as I am satisfied with Prism.
lolo9393 said:
That sound very strange,like your file modification isn't taken into consideration by the SW.
this worked very fine for me, i am (still) with Prism 4.3 Rom and may be 4.4 is different at this point.
If you have time to investigate this will avoid me to rush on moving to fresh KK as I am satisfied with Prism.
Click to expand...
Click to collapse
i know..i tried everything, from flashable zips to build.prop editors, and none of them worked
Related
Only if the two lines from top are displaying different values for PARTS and PHONE firmware then you would
1. Dial *#2663# in the dialer
2. Click on TSP FW UPDATE (General) it shouldn't need a reboot
3. Make sure PARTS and PHONE show the same values
4. Inverted Touch Screen Fixed
THANKS GOES TO @Wuby986
Hey thanks for credits..
is there a lot of people suffering from this?
i originally had the problem because i am an idiot (yesss)... too fast reading in CF-root download page and i flashed the edge package over a flat device (ouch)... luckly i found how to fix easy
did you guys flashed the correct one?
Wuby986 said:
Hey thanks for credits..
is there a lot of people suffering from this?
i originally had the problem because i am an idiot (yesss)... too fast reading in CF-root download page and i flashed the edge package over a flat device (ouch)... luckly i found how to fix easy
did you guys flashed the correct one?
Click to expand...
Click to collapse
Yeah I've seen quite a few with this problem including me, yw!
MMDragonRanger said:
Yeah I've seen quite a few with this problem including me, yw!
Click to expand...
Click to collapse
Wooow this is scary... Well for this we have a workaround.. Let's just hope this is the only "surprize" we can get.. Thanks for share..
Also i would like to say that this is gonna help only if, once you are in the firmware page after dialing, the first two lines from top are displaying different values for part's and general firmware..
Hitting the tsp update is going to make those match
MMDragonRanger said:
Only if the two lines from top are displaying different values for PARTS and PHONE firmware then you would
1. Dial *#2663# in the dialer
2. Click on TSP FW UPDATE (General) it shouldn't need a reboot
3. Make sure PARTS and PHONE show the same values
4. Inverted Touch Screen Fixed
THANKS GOES TO @Wuby986
Click to expand...
Click to collapse
hi, can you help me. the dial don't want open this code.
U know why ? Thx a LOOOT !
neferym said:
hi, can you help me. the dial don't want open this code.
U know why ? Thx a LOOOT !
Click to expand...
Click to collapse
You have to be on a stock rom, there is an app that worked with my s5 to access those secret menus but i doubt it works with the s6
MMDragonRanger said:
You have to be on a stock rom, there is an app that worked with my s5 to access those secret menus but i doubt it works with the s6
Click to expand...
Click to collapse
yeah, whith this one, i can access to app : G920FXXU1AOD9_G920FOXA1AOD9_G920FXXU1AOD9_HOME.tar
Ty !
Thank you with all my heart, you just save my life... and my S6 920F !!!
There are at least 2 idiots on this planet, and the other was me ...
The phone has been running properly ..
Helpful Information thanks buddy ...:good:
it works!
thanks
MMDragonRanger said:
Only if the two lines from top are displaying different values for PARTS and PHONE firmware then you would
1. Dial *#2663# in the dialer
2. Click on TSP FW UPDATE (General) it shouldn't need a reboot
3. Make sure PARTS and PHONE show the same values
4. Inverted Touch Screen Fixed
THANKS GOES TO @Wuby986
Click to expand...
Click to collapse
---------- Post added at 02:28 PM ---------- Previous post was at 02:24 PM ----------
Dear it is fixed. Thanks a lot
Can someone help me? When I try to access this code through my dialer I get "Not Registered on Network". I flashed a new stock ROM through Odin and the problem still arises.
---------- Post added at 02:18 PM ---------- Previous post was at 02:15 PM ----------
steviecvr said:
Can someone help me? When I try to access this code through my dialer I get "Not Registered on Network". I flashed a new stock ROM through Odin and the problem still arises.
Click to expand...
Click to collapse
Sorry, a reboot fixed this. Thanks so much for this thread.
SwissGalaxy said:
Thank you with all my heart, you just save my life... and my S6 920F !!!
There are at least 2 idiots on this planet, and the other was me ...
Click to expand...
Click to collapse
Make that 3 idiots.
It didn't work for me..
Thanks a lot Mr wuby986,you save my life,after trying many methods on s6 reverted touchscreen,and all failed,tried yours and works,thanks a lot once again.
Worked for me!
I somehow got into this state on my T-Mobile Galaxy Note 4 (N910T) when I flashed the latest TWRP (v3.0.2-0). At first I flashed the .img using my existing TWRP 2.8.7, but then I was unable to boot into recovery. I then used ODIN to flash the .tar version which worked. However, after rebooting into the system my touch was all messed up. Thankfully the stylus worked just fine so I was able to use that to use my phone until I found this thread.
I did *#2663# in the dialer, saw my versions didn't match and did the update as per the OP. Everything is back to normal now!
This fixed my screen glitch. You make me love the internet. I found this page only after several hours of searching.
I had tried to update to TWRP 3.0 with the Android app but selected the wrong device (Note 4 Edge instead of Note 4).
I do have other problems. Recent and Back Button Not working
how to fix the recent button and back button of galaxy s6,it was working before then suddenly the button stop working even when you touch it its not showing any response or light..i did try to full factory reset in odin mode buts not fix the issue
please help im using the assististant menu for a while ands it really annoying
Tha ks
lanreb said:
This fixed my screen glitch. You make me love the internet. I found this page only after several hours of searching.
I had tried to update to TWRP 3.0 with the Android app but selected the wrong device (Note 4 Edge instead of Note 4).
Click to expand...
Click to collapse
So I have the same inverted screen problem! Although mine is across the Y-axis... Touch the left and the button on the right gets clicked.
I'm SURE what did it was installing TWRP 3.0! And now I see someone else had the same cause!
But I have a G920P running 5.0.2. (and I'd like to keep my firmware where it is). What can I do!? HELP!
I had root, but I needed to install a recovery so I could install Xposed Framework so I could enable a module. And here we are...
Update: This issue was solved for me. TWRP still won't boot, but at least my touch issue is gone.
Hi
All the threads are old and have mixed results.
I picked up a Ouya at a thrift store for 15 bux. Would like to root but dont want to trash it. Is there a new method that works.
I powered it up and it took an update yesterday so its at the latest.
There's a search button for that reason. Just try it...
ldeveraux said:
There's a search button for that reason. Just try it...
Click to expand...
Click to collapse
Thanks for the non-help but I have searched for over 3 hours on this site and many others. The threads are 2013 & 2014 in case you are wondering it is 5-15 and nothing new on this for 5 or 6 months.
Anybody out there who can actually help please respond. anybody with search button directions stfu.
steve4cr said:
Thanks for the non-help but I have searched for over 3 hours on this site and many others. The threads are 2013 & 2014 in case you are wondering it is 5-15 and nothing new on this for 5 or 6 months.
Anybody out there who can actually help please respond. anybody with search button directions stfu.
Click to expand...
Click to collapse
Ok thanks!
ldeveraux said:
Ok thanks!
Click to expand...
Click to collapse
Your quite welcome
Yes see attached file
tjsooley said:
Yes see attached file
Click to expand...
Click to collapse
Hi
Thank you for responding but no luck with that one either. Click install, shows me all the info it has access to, then pops a window "App Not Installed.
I am running Chickcharney HOTFIX #2 12/15
steve4cr said:
Hi
Thank you for responding but no luck with that one either. Click install, shows me all the info it has access to, then pops a window "App Not Installed.
I am running Chickcharney HOTFIX #2 12/15
Click to expand...
Click to collapse
did you try frameroot?
I'm not sure why non of the guides work for you. I used the root tool in ouyas own store the other day on an ouya my friend didn't want anymore and it worked fine.
---------- Post added at 09:01 PM ---------- Previous post was at 08:57 PM ----------
Like a couple years ago when I rooted my first ouya I used fastboot and cwm. But I'm pretty sure there was an all in one ouya adb tool that would did everything you could possible need root cwm Roms backups I will have to take a look when I get home but I have the apk on a backup drive somewhere. I will try to find it for you.
steve4cr said:
Hi
Thank you for responding but no luck with that one either. Click install, shows me all the info it has access to, then pops a window "App Not Installed.
I am running Chickcharney HOTFIX #2 12/15
Click to expand...
Click to collapse
here is my root video https://www.youtube.com/watch?v=thTPa-QIIo8
NOTE: This isn't a tutorial it just shows i have it working. i used a tutorial i found and it's in the description of the video
MrGHLover said:
here is my root video https://www.youtube.com/watch?v=thTPa-QIIo8
NOTE: This isn't a tutorial it just shows i have it working. i used a tutorial i found and it's in the description of the video
Click to expand...
Click to collapse
Thanks, after much pounding around I got it rooted. Could not get the google apps working but no big deal.
So for those looking----it is still possible as of June 2015
steve4cr said:
Thanks, after much pounding around I got it rooted. Could not get the google apps working but no big deal.
So for those looking----it is still possible as of June 2015
Click to expand...
Click to collapse
Correct. I did it last night with a mix of Kingroot (older version, the new stops working at 18%) and the updated xposed and playstore zip file.
If anyone needs, and if it's allowed, I will post the files later.
I had my ouya rooted, collecting dust.. Then decided to flash an AOSP rom, and bricked it.. Looked and found this video,I achieve root, boot menu , cm11 with this video . http://youtu.be/fYwZ_l31-G8 , beware.. Strange sounds in the background ... ?
I have the moo x rooted and using xposed as well, my question is, could I follow other instructions over the internet about how to get it or are they specific for this device?
Sorry for bad english , and thanks :good:!
nickest said:
I have the moo x rooted and using xposed as well, my question is, could I follow other instructions over the internet about how to get it or are they specific for this device?
Sorry for bad english , and thanks :good:!
Click to expand...
Click to collapse
You can follow other guides. I tried it once. It's pretty simple. There is a build.prop edit (I think it's setting ro.build.type to userdebug) and then enabling multi window in developer options.
dustin_b said:
You can follow other guides. I tried it once. It's pretty simple. There is a build.prop edit (I think it's setting ro.build.type to userdebug) and then enabling multi window in developer options.
Click to expand...
Click to collapse
Cool, and whats or was your experience with it?
nickest said:
Cool, and whats or was your experience with it?
Click to expand...
Click to collapse
It seemed stable enough but it's not very user friendly. It took a little while to figure out the controls. It's not very straightforward and a little confusing. There's no X or anything at the top of the window to close it which is weird and you can't swipe it away either. It has to been done in the task manager. And then I kept getting spammed in the notification bar by Motorola for feedback on Attentive display, which I was using by the way. If you're not using it you shouldn't have that problem and I think that's from making the build user debug. But it is experimental so I would expect some bugs or they would have put it the final version.
Hello,
After messing the devices whatsoever!
i want to do a fresh start, clean install !
i've downloaded the full rom last december...
Started back in fastboot and flashing, but the boot doesn't work...
i guess i'm missing something in the install... still some slots A and B etc etc
What would be the best way to make a fresh start ? should it be slot A or B ?
because for the moment, i cant restore my device
Flash the newest available firmware with MiFlash tool selecting "Clear all" in the bottom right corner.
fosco_ said:
Flash the newest available firmware with MiFlash tool selecting "Clear all" in the bottom right corner.
Click to expand...
Click to collapse
did that ! but touchscreen or keyboard doesn'work
STEKAM said:
did that ! but touchscreen or keyboard doesn'work
Click to expand...
Click to collapse
Really bro? Do you know how to flash the ROM properly? If not you're being a complete a**hole as people will put their resource on that problem just because you don't follow the flash instructions properly. You're issue is really weird and shouldn't be occurring at all, maybe that's a hardware issue or some of the image files of the Stock ROM you download must be corrupt.
Hello EdWin
Thanks for the very nice answer. Its a pity you lost that much time for such an idiot answer
I've been flashing phones since first release of android and no phone has ever been bricked...
- So yes i know how to flash a rom...
Lately i've notice the android structure changed, talking about slots... Which i dont know very well...
- sorry being an asshole but I wanted to have an input on how to do a clear fresh start...
- concerning my issues... Confirm this is happening... On the October update i dont have any issue... And on December update touch screen is not working well, it work once after i shut down the screen and put it back on...
Unless you have anything constructive i suggest you dont loose anymore time to make stupid answer !
STEKAM said:
Hello EdWin
Thanks for the very nice answer. Its a pity you lost that much time for such an idiot answer
I've been flashing phones since first release of android and no phone has ever been bricked...
- So yes i know how to flash a rom...
Lately i've notice the android structure changed, talking about slots... Which i dont know very well...
- sorry being an asshole but I wanted to have an input on how to do a clear fresh start...
- concerning my issues... Confirm this is happening... On the October update i dont have any issue... And on December update touch screen is not working well, it work once after i shut down the screen and put it back on...
Unless you have anything constructive i suggest you dont loose anymore time to make stupid answer !
Click to expand...
Click to collapse
Please post your touch screen model
Just dial (on November Rom that seems to work for you) *#*#6484#*#* and select version info
jack_21 said:
Please post your touch screen model
Just dial (on November Rom that seems to work for you) *#*#6484#*#* and select version info
Click to expand...
Click to collapse
Hello Jack, thanks foir the answer...
what i find here is that info : LCD : GFF,vendor:tianma,ICtm1911(focal)
does that speak to you ?
thanks
STEKAM said:
Hello Jack, thanks foir the answer...
what i find here is that info : LCD : GFF,vendor:tianma,ICtm1911(focal)
does that speak to you ?
thanks
Click to expand...
Click to collapse
You have to post TP info, not lcd
STEKAM said:
Hello,
After messing the devices whatsoever!
i want to do a fresh start, clean install !
i've downloaded the full rom last december...
Started back in fastboot and flashing, but the boot doesn't work...
i guess i'm missing something in the install... still some slots A and B etc etc
What would be the best way to make a fresh start ? should it be slot A or B ?
because for the moment, i cant restore my device
Click to expand...
Click to collapse
Have a look at my guide over here: https://forum.xda-developers.com/mi-a1/how-to/ota-official-fastboot-image-n2g47h-7-12-t3728929
It should answer all of your questions and it includes the proper batch/ shell script files which automate the flashing for you straight away.
Hello
Wanted to start a discussion for those who have rooted - since we don't have TWRP for now - our options might be limited
Hopefully everyone can share the root apps working, workarounds and their respective discussions
I assumed Gpay would work but not at the moment
Viper4Android working: Steps
Titanium is good
Please share your TIPS and useful apps
Everything should work except Knox stuff
My phone is coming either Tuesday or Wednesday
That stupid holiday is annoying
I’d post something
inningsdefeat500 said:
Hello
Wanted to start a discussion for those who have rooted - since we don't have TWRP for now - our options might be limited
Hopefully everyone can share the root apps working, workarounds and their respective discussions
I assumed Gpay would work but not at the moment
Viper4Android not working
Titanium is good
Please share your TIPS and useful apps
Click to expand...
Click to collapse
Im getting my Hong Kong variation in a week hopefully and i will definitely root it, Why doesn’t viper work? Did you enable it thru magisk?
inningsdefeat500 said:
Hello
Wanted to start a discussion for those who have rooted - since we don't have TWRP for now - our options might be limited
Hopefully everyone can share the root apps working, workarounds and their respective discussions
I assumed Gpay would work but not at the moment
Viper4Android not working
Titanium is good
Please share your TIPS and useful apps
Click to expand...
Click to collapse
Viper4Android is working though a bit tricky to enable in Android 10. The only reason I keep rooting phones.
You can follow below guide for step by step instructions.
inningsdefeat500 said:
Hello
Wanted to start a discussion for those who have rooted - since we don't have TWRP for now - our options might be limited
Hopefully everyone can share the root apps working, workarounds and their respective discussions
I assumed Gpay would work but not at the moment
Viper4Android not working
Titanium is good
Please share your TIPS and useful apps
Click to expand...
Click to collapse
mustasusi said:
Viper4Android is working though a bit tricky to enable in Android 10. The only reason I keep rooting phones.
You can follow this guide for step by step instructions.
Click to expand...
Click to collapse
Yes i have it on my oneplus 6t. Is it safe going max volume with viper?
KURDKiNG said:
Yes i have it on my oneplus 6t. Is it safe going max volume with viper?
Click to expand...
Click to collapse
I believe it is as long as you don't pull out too much bass which might clip or distort the sound.
Some phones come with a weak volume setting by software, that might result in a compressed sound the higher you push up which I don't like, so better have your mixers_patch or whatever it is now to manually set the value as loud as you like.
TheUndertaker21 said:
Everything should work except Knox stuff
My phone is coming either Tuesday or Wednesday
That stupid holiday is annoying
I’d post something
Click to expand...
Click to collapse
Gpay doesn't - I tried, thats why this thread so we could help each other
mustasusi said:
Viper4Android is working though a bit tricky to enable in Android 10. The only reason I keep rooting phones.
You can follow this guide for step by step instructions.
Click to expand...
Click to collapse
Your link is broken, please show me the right one - I too want this bad. I followed the official one and as soon as I install and run it, says patching problems
KURDKiNG said:
Im getting my Hong Kong variation in a week hopefully and i will definitely root it, Why doesn’t viper work? Did you enable it thru magisk?
Click to expand...
Click to collapse
Ive heard it can softbrick?
inningsdefeat500 said:
Your link is broken, please show me the right one - I too want this bad. I followed the official one and as soon as I install and run it, says patching problems
Click to expand...
Click to collapse
For some reason it doesn't let me link this URL here. Either it's prohibited but I hope I'm not breaking another rule by attaching it as a PDF.
Good luck.
mustasusi said:
For some reason it doesn't let me link this URL here. Either it's prohibited but I hope I'm not breaking another rule by attaching it as a PDF.
Good luck.
Click to expand...
Click to collapse
ya I tried that, fails at step 8
inningsdefeat500 said:
ya I tried that, fails at step 8
Click to expand...
Click to collapse
For me it worked pretty straight forward on my N986N.
Did you use the patched kernel provided by Dr Ketan to root your device?
Did Viper ask to grant permissions at first launch?
mustasusi said:
For me it worked pretty straight forward on my N986N.
Did you use the patched kernel provided by Dr Ketan to root your device?
Did Viper ask to grant permissions at first launch?
Click to expand...
Click to collapse
he removed it and put news instructions, to create own which I did
But ur model is N986N - its different than 9860
got Viper working after re-rooting
Download latest Viper4Android
Install - When it ask to download drivers, DONT
Open Magisk and install Audio Modifications Library
Open Viper4Android again
This time press OK > Give rights > Let it install driver
Reboot ( Mine did it 3 times to install ) but it did
After that check the status > Mine was Processing = NO
You can test by playing audio and pick headphone etc and see if Status Changes
Mine did not so I followed XDA post abt this
Steps are ( Need Root Exploer )
Goto data/adb/modules/aml/system/etc and give RW permissions to audio_effects.conf - MOVE it to data/adb/modules/aml/vendor/etc
Reboot and is all good
I've not needed to root in YEARS, Last Samsung phone I rooted was the S7. What are the advantages these days? obv I'd lose Knox secure folder, which is shall we say handy and Samsung Pay. Last I checked Google Pay worked using MagiskHide module part of Magisk
Viper4android is working with no tricks
Everything else
does this phone work on verizon? 4g?
i don't care about 5g.