I used the pit file posted here (http://forum.xda-developers.com/show....php?t=2643109) and was able to make the DBT FW work. However my LTE speeds have gone south with very low speeds.
Any idea?
newapostlenew said:
I used the pit file posted here (http://forum.xda-developers.com/show....php?t=2643109) and was able to make the DBT FW work. However my LTE speeds have gone south with very low speeds.
Any idea?
Click to expand...
Click to collapse
Check your APN settings, it's possible they have been modified due to KK update. - Check your carriers website.
radicalisto said:
Check your APN settings, it's possible they have been modified due to KK update. - Check your carriers website.
Click to expand...
Click to collapse
To no avail i am afraid. As far as you know- does updating to the DBT FW inhibit LTE modem in any way? coz i understand LTE bands differ between Saudi & Germany.
newapostlenew said:
To no avail i am afraid. As far as you know- does updating to the DBT FW inhibit LTE modem in any way? coz i understand LTE bands differ between Saudi & Germany.
Click to expand...
Click to collapse
LTE bands are hardware not Modem, check mobile data/networks and see if you have an LTE/GSM/WCDMA option - if so make sure you have it enabled.
radicalisto said:
LTE bands are hardware not Modem, check mobile data/networks and see if you have an LTE/GSM/WCDMA option - if so make sure you have it enabled.
Click to expand...
Click to collapse
Indeed they are. i have the LTE option and the settings are correct however speeds are very slow.
on JB the LTE was working fine (20-40 Mbps D).
I am going to flash the XEO Rom as well to see if the SW inhibits the ability to avail full LTE capabilities in any way or not.
Thanks for your reply though.
radicalisto said:
Check your APN settings, it's possible they have been modified due to KK update. - Check your carriers website.
Click to expand...
Click to collapse
FUrthermore - i cannotw riteanything on my SDCARD? this must be related to the installation? should i reinstall with wipe and cache wipe? What do you recommend?
SD card is a permission error, try and reflash it from scratch again see if it fixes
Sent from my CM11 Kitkat powered N9005
radicalisto said:
SD card is a permission error, try and reflash it from scratch again see if it fixes
Sent from my CM11 Kitkat powered N9005
Click to expand...
Click to collapse
The LTE sluggish speeds 0.42 Mbps down - are also being exhibited on the Polish FW. Even after tweaking settings an all. Are u aware of any remedy to this?
newapostlenew said:
The LTE sluggish speeds 0.42 Mbps down - are also being exhibited on the Polish FW. Even after tweaking settings an all. Are u aware of any remedy to this?
Click to expand...
Click to collapse
i tried installing Polish FW and DBT multiple times - DBT4 appears more stable. However on both my LTE drops to almost dead.
Can you point to any remedy to this?
Not seen anything about drop in LTE speeds
Sent from my CM11 Kitkat powered N9005
radicalisto said:
Not seen anything about drop in LTE speeds
Sent from my CM11 Kitkat powered N9005
Click to expand...
Click to collapse
Thanks radicalisto.
Before the upgrade to KK my speeds were in the range of 20-40Mbs. Now they are hovering over 0.4Mbps. Settings are corrects. After multiple tries no effect. So obviously there is a glitch.
I would appreciate any input from any senior XDA member who has any info about this.
Much appreciated.
I'll flash into DBT and test later on (in bed currently as I work nights) - on XEO I was getting 60meg from LTE, get the same on CM. So not sure why you are suffering a speed drop.
Sent from my CM11 Kitkat powered N9005
radicalisto said:
I'll flash into DBT and test later on (in bed currently as I work nights) - on XEO I was getting 60meg from LTE, get the same on CM. So not sure why you are suffering a speed drop.
Sent from my CM11 Kitkat powered N9005
Click to expand...
Click to collapse
Please do and share your results after. The LTE speeds on my carrier ZAIN SAUDI are usually pretty good ranging from 20-40Mbps and they were on JB. But for me both on XEO & DBT FW LTE is almost 0 Despite settings and everything else in order.
Thanks again.
Related
Hello everyone,
first time poster here, so please be gentle if I missed one of the rules here... I've searched through the threads here but am still somewhat confused.
I have an unlocked, unbranded international edition I9300 coming in the mail shortly. I intend to use it in the United States on the T-Mobile network. It turns out that T-Mobile has 3G coverage in the 1900 MHz band where I live.
Being a complete nub, I would prefer to not root the phone. However, I'm also wondering whether it is possible to install a version of official Jelly Bean on there once I get it through Kies? I've looked at the releases for Poland and Sweden, but they seem to all be branded versions for specific carriers. Would they work for me?
Thank you in advance!
min2209 said:
Hello everyone,
first time poster here, so please be gentle if I missed one of the rules here... I've searched through the threads here but am still somewhat confused.
I have an unlocked, unbranded international edition I9300 coming in the mail shortly. I intend to use it in the United States on the T-Mobile network. It turns out that T-Mobile has 3G coverage in the 1900 MHz band where I live.
Being a complete nub, I would prefer to not root the phone. However, I'm also wondering whether it is possible to install a version of official Jelly Bean on there once I get it through Kies? I've looked at the releases for Poland and Sweden, but they seem to all be branded versions for specific carriers. Would they work for me?
Thank you in advance!
Click to expand...
Click to collapse
Yes they will work on any i9300 model. However JB for your particular region should be out soon. So, you could just wait and update through KIES to avoid an hassle.
The Polish release is not branded. The Swedish is.
It just so happens I just came back from the states where I used my I9300 with my stock Polish DLIB rom on T-Mobile. Worked great.
Okay, thanks!
If the OS is branded, what differences does it have other than the splash screen at startup? Can these be installed without rooting?
Also - the North American variant is not the quad core i9300. Do you think they will still release an update through Kies to the U.S. for i9300?
min2209 said:
Okay, thanks!
If the OS is branded, what differences does it have other than the splash screen at startup? Can these be installed without rooting?
Also - the North American variant is not the quad core i9300. Do you think they will still release an update through Kies to the U.S. for i9300?
Click to expand...
Click to collapse
The boot animation, some sounds probably, some carrier specific apps and/or games. In this case the telenor release is almost clean from what I read.
The apps you can disable without root, the boot animation you cannot.
If I were you I would go for the newest JB release and wouldn't worry about the branding or the CSC. If another newer release comes around you can just flash it over your existing rom using Odin without losing anything.
The NA versions will most likely receive JB as the Note2 which is about to hit retail in the US is already running it.
im waiting for the official uk update either that or a good working aosp rom
victorator said:
The Polish release is not branded. The Swedish is.
It just so happens I just came back from the states where I used my I9300 with my stock Polish DLIB rom on T-Mobile. Worked great.
Click to expand...
Click to collapse
wait, does that mean I cant use my sgs3 (polish fw) with at&t????
What would be the best JB to work on AT&T for best modem and APN settings. Right now I still have everything stock as I got it last Friday but getting terrible data speeds. This is in an a H+ Coverage area. I have the AT&T branded Red SIII and a international SIII and on the AT&T branded I get 3 to 4 Mbps download, while the international just breaks the 1Mbps download speed.
Sent from my GT-N8000 using xda premium
ElCamino said:
What would be the best JB to work on AT&T for best modem and APN settings. Right now I still have everything stock as I got it last Friday but getting terrible data speeds. This is in an a H+ Coverage area. I have the AT&T branded Red SIII and a international SIII and on the AT&T branded I get 3 to 4 Mbps download, while the international just breaks the 1Mbps download speed.
Sent from my GT-N8000 using xda premium
Click to expand...
Click to collapse
ouch that's not a small difference, will check then
thanks
victorator said:
The boot animation, some sounds probably, some carrier specific apps and/or games. In this case the telenor release is almost clean from what I read.
The apps you can disable without root, the boot animation you cannot.
If I were you I would go for the newest JB release and wouldn't worry about the branding or the CSC. If another newer release comes around you can just flash it over your existing rom using Odin without losing anything.
The NA versions will most likely receive JB as the Note2 which is about to hit retail in the US is already running it.
Click to expand...
Click to collapse
I used dsixda's kitchen with the system.img and have nothing branded at all.
victorator said:
The boot animation, some sounds probably, some carrier specific apps and/or games. In this case the telenor release is almost clean from what I read.
The apps you can disable without root, the boot animation you cannot.
If I were you I would go for the newest JB release and wouldn't worry about the branding or the CSC. If another newer release comes around you can just flash it over your existing rom using Odin without losing anything.
The NA versions will most likely receive JB as the Note2 which is about to hit retail in the US is already running it.
Click to expand...
Click to collapse
Who told you that there are carrier specific boot animation or sound in Swedish jelly bean? Apart from one Telenor app there is zero customization in this rom. And even this app can be easily disabled without rooting.
Sent from my GT-I9300 using xda premium
omeryounos said:
Who told you that there are carrier specific boot animation or sound in Swedish jelly bean? Apart from one Telenor app there is zero customization in this rom. And even this app can be easily disabled without rooting.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Oh really, is that right? Great! I am going to install this on my phone as soon as I get it then.
Can't wait!
min2209 said:
Oh really, is that right? Great! I am going to install this on my phone as soon as I get it then.
Can't wait!
Click to expand...
Click to collapse
200% sure. I'm using it.
Sent from my GT-I9300 using xda premium
alankstiyo said:
wait, does that mean I cant use my sgs3 (polish fw) with at&t????
Click to expand...
Click to collapse
I bought an international while in Saudi Arabia on business. I works just fine on Att with polish xxdlib. I have no problems pulling down 3 to 4 mb in decent areas. Unfortunately that is rare for me because I'm staying with family out in the boondocks temporarily.
Hello
I've some questions.
First question : is there a way that i can force my phone to switch directly to 4g. In data settings i've only the choice of selecting gsm, only wcdma, wcdma/gsm , lte/wcdma/gsm. When i select the last choice it goes from edge to h to h plus and than to 4g. But it takes to long. Is there no option to directly select 4g/lte ?
Second question: i've flashed my i9505 with omega rom. Everything works fine. But i think that my radio signal is not good enough. I'm still confused what i need to do? Do i need to flash an other modem? Or do i need to flash an other kernel? And the modem is it directly an lte modem or is this also something different?
??? Nobody ???
Yes, it is to do with your modem...
May i ask what country you are in & the network? i can find out what is the latest modem available for your phone provided by your provider or you can do it yourself on Sam Mobile
Sent from my GT-I9505 using XDA Premium 4 mobile app
AwaisKhan said:
Yes, it is to do with your modem...
May i ask what country you are in & the network? i can find out what is the latest modem available for your phone provided by your provider or you can do it yourself on Sam Mobile
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm from belgium and i'm using proximus. I've omega rom installed v12 with adam kernel. And its jellybean 4.2.2
gohigher123 said:
I'm from belgium and i'm using proximus. I've omega rom installed v12 with adam kernel. And its jellybean 4.2.2
Click to expand...
Click to collapse
I just had a look on Sam Mobile & i couldnt find any official firmwares in Belgium, so i suggest just updating your modem to a newer version, so what is your current modem? could you screenshot it from 'About Phone'
Sent from my GT-I9505 using XDA Premium 4 mobile app
AwaisKhan said:
I just had a look on Sam Mobile & i couldnt find any official firmwares in Belgium, so i suggest just updating your modem to a newer version, so what is your current modem? could you screenshot it from 'About Phone'
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Here you have the screen shot you requested. But i've an other question. When i do a speed test on 4g/lte then i have speeds of 52 Mbps down and 20 mbps up. So that's more than ok. But when i use hspd then i only get 0.5 mbps down and 0.2 mbps up. With 4bars filled on hspd+ i don't think that's a normal speed. On my galaxy s3 i got 9Mbps down and 5Mbps up. So if i'm gonna flash an other modem , is that affecting my 4g speeds to? Or are they 2 different things?
gohigher123 said:
Here you have the screen shot you requested. But i've an other question. When i do a speed test on 4g/lte then i have speeds of 52 Mbps down and 20 mbps up. So that's more than ok. But when i use hspd then i only get 0.5 mbps down and 0.2 mbps up. With 4bars filled on hspd+ i don't think that's a normal speed. On my galaxy s3 i got 9Mbps down and 5Mbps up. So if i'm gonna flash an other modem , is that affecting my 4g speeds to? Or are they 2 different things?
Click to expand...
Click to collapse
It will affect everything reception, data, battery etc. But the latest modem for the i9505 is
http://d-h.st/f3A - I9505ZHUDMI1
In Odin, open extracted file ".tar.md5" as PHONE
AwaisKhan said:
It will affect everything reception, data, battery etc. But the latest modem for the i9505 is
http://d-h.st/f3A - I9505ZHUDMI1
In Odin, open extracted file ".tar.md5" as PHONE
Click to expand...
Click to collapse
I've flashed it with odin but nothing happens. When i go to setting al seems the same. Also when i try the speed test nothing has changed.
Now what?
Hi Everyone, I am having some annoying issues with my Lollipop since upgrading my note 3.
The build is Build LRX21V.N9005XXUGBOEA, Kernal version 3.4.0 -50200004 and base version N9005XXUUGBOD3
I have noticed the GPS is horrible. It often drops out and whilst using it, it drops out all the time and is always losing signal. I had to install a second app to help support the GPS so it works mostly no but not as well as it used too.
The wifi and 4G is a problem as well. It will often freeze and the whole phone becomes unresponsive and I have to take the battery out too reboot it.
Is there a more stable version I should be using please? I am getting tired of these ongoing issues, if I can't find a solution, I might just roll back too kitkat.
Other the GPS issue (it locks fine outside but I am still not happy that it sometimes won't lock inside) there are no problems on my phone at all. There is no 4G here, but H+ stays almost always, WiFi is absolutely rock solid too! Honestly I am really happy with this TouchWiz iteration. I was on OEA and I didn't have any issue as far as I can remember, but now I am on OF3, but as you can guess I wasn't having those issues you mentioned on OEA either, so I really don't know what to tell you mate.
ithehappy said:
Other the GPS issue (it locks fine outside but I am still not happy that it sometimes won't lock inside) there are no problems on my phone at all. There is no 4G here, but H+ stays almost always, WiFi is absolutely rock solid too! Honestly I am really happy with this TouchWiz iteration. I was on OEA and I didn't have any issue as far as I can remember, but now I am on OF3, but as you can guess I wasn't having those issues you mentioned on OEA either, so I really don't know what to tell you mate.
Click to expand...
Click to collapse
Thanks for getting back to me. I was hoping someone would be able to point me in the direction of a more solid version. I am running the first one that came out, so am thinking maybe a better version has been released that has fixes in place for these issues. Sorry I am not sure what OEA is or OF3
DevilsArc said:
Thanks for getting back to me. I was hoping someone would be able to point me in the direction of a more solid version. I am running the first one that came out, so am thinking maybe a better version has been released that has fixes in place for these issues. Sorry I am not sure what OEA is or OF3
Click to expand...
Click to collapse
OF3 is how we refer to firmware the last 3 digits but if I was you I would get very latest OG4 and update your modem to OF3 your firmware is a buggy release
Sent from my SM-G9250 using Tapatalk
DevilsArc said:
Hi Everyone, I am having some annoying issues with my Lollipop since upgrading my note 3.
The build is Build LRX21V.N9005XXUGBOEA, Kernal version 3.4.0 -50200004 and base version N9005XXUUGBOD3
I have noticed the GPS is horrible. It often drops out and whilst using it, it drops out all the time and is always losing signal. I had to install a second app to help support the GPS so it works mostly no but not as well as it used too.
The wifi and 4G is a problem as well. It will often freeze and the whole phone becomes unresponsive and I have to take the battery out too reboot it.
Is there a more stable version I should be using please? I am getting tired of these ongoing issues, if I can't find a solution, I might just roll back too kitkat.
Click to expand...
Click to collapse
I am having a worst issue on same Stock firmware.. Same baseband, same kernel.
All stock
My wifi and Bluetooth isn't turning on.. Please help.
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Murshad007 said:
I am having a worst issue on same Stock firmware.. Same baseband, same kernel.
All stock
My wifi and Bluetooth isn't turning on.. Please help.
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Click to expand...
Click to collapse
Fully wipe the phone, then flash the firmware.
ithehappy said:
Fully wipe the phone, then flash the firmware.
Click to expand...
Click to collapse
Should I reflash same? It's KSA firmware, Or open Europe?
I am in Pakistan currently..
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Murshad007 said:
Should I reflash same? It's KSA firmware, Or open Europe?
I am in Pakistan currently..
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Click to expand...
Click to collapse
Doesn't matter where you are mate. Just get either OF3 or OG4 from sammobile, whichever has more build number and flash it. Update your modem too.
Sent from my SM-N9005 using Tapatalk
ithehappy said:
Doesn't matter where you are mate. Just get either OF3 or OG4 from sammobile, whichever has more build number and flash it. Update your modem too.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Hi,
I am on OG4 which I downloaded from Sammobile and I flashed it through Odin (checked only F. Time Reset & Auto Reboot). Everything else works fine but my Wifi does not turn on. Bluetooth & H+ (3G) are also working fine. Can you please tell me whether I need to update modem? I was rooted previously & Knox is at 0x1. Can you share the link for flashing the modem if it's required? Or any other solution please.
OG4
Quote:
Originally Posted by ithehappy
Doesn't matter where you are mate. Just get either OF3 or OG4 from sammobile, whichever has more build number and flash it. Update your modem too.
Sent from my SM-N9005 using Tapatal
Redmax! said:
Hi,
I am on OG4 which I downloaded from Sammobile and I flashed it through Odin (checked only F. Time Reset & Auto Reboot). Everything else works fine but my Wifi does not turn on. Bluetooth & H+ (3G) are also working fine. Can you please tell me whether I need to update modem? I was rooted previously & Knox is at 0x1. Can you share the link for flashing the modem if it's required? Or any other solution please.
Click to expand...
Click to collapse
I also flashed UAE Lollipop OG4 but my WiFi and Bluetooth still not turning on.
I don't know how and why you guys have these problems!
Anyway, I am sure you must have fully wiped the device before upgrading right? By full wipe I mean wiping everything, TWRP - Advanced Wipe - Select all (except external SD of course) and then flash the ROM via Odin.
ithehappy said:
I don't know how and why you guys have these problems!
Anyway, I am sure you must have fully wiped the device before upgrading right? By full wipe I mean wiping everything, TWRP - Advanced Wipe - Select all (except external SD of course) and then flash the ROM via Odin.
Click to expand...
Click to collapse
Nops. I told from the start that I am fully Stock, Never rooted. So I just Cleared cache and Factory data..
Downloaded and Tried to Installed Hong Kong OH3 but failed Twice..
Boot looped in Download mode with yellow triangle.
Reflashed UAE Lollipop again.
What should I flash now? Taiwan Rom OG3 or Nordic countries OF3?
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
When i restart my phone it shows set warranty bit : Kernel
how can i slove this peoplem
---------- Post added at 05:21 PM ---------- Previous post was at 05:17 PM ----------
i haved a proplem woth the sm-n9005 when i ever restart my phone it shows set bit warranty bit : kernel
and i have a question if i donloaded a new firmware does the imei will change pls replay fastly
No imei does not change.
Warranty bit kernel is correct.
Details found via SEARCH.
https://forum.xda-developers.com/search/forum/2494?query=set warranty bit : Kernel
Reason. Custom rom kernel etc.
Hey guys,
Due to lte connection problem, carrier customizing, etc..., I have a question:
I have K version, could I flash S version by Odin in my n935k model?
here http://tekhd.com/ at 06 July 2017 date you can find all the firmwares as below:
SM-N935K_N935KKKU3AQFE Firmware update for the Samsung Galaxy N7 FE K variant. (SM-N935K)
SM-N935L_N935LKLU3AQFE Firmware update for the Samsung Galaxy N7 FE L variant. (SM-N935L)
SM-N935S_N935SKSU3AQFE Firmware update for the Samsung Galaxy N7 FE S variant. (SM-N935S)
System Dump + Boot Image
N7FE-N935SKSU3AQFE-SYSTEM-CSC-BOOT_(ODEX)
N7FE-N935SKSU3AQFE-SYSTEM-CSC-BOOT_(DEODEX)
Thanks to @tekXodus
isn't it just the CSC you need for network stuff? Don't see why it wouldn't but back up phone first.
Google for the K variant: it's on a vietnamese site. It works too. Have installed it twice so far.
bonerp said:
isn't it just the CSC you need for network stuff? Don't see why it wouldn't but back up phone first.
Click to expand...
Click to collapse
three firmware has different cusomized setting menu, I don't know if the three firmware are compatibles each other.
zamzenos said:
Google for the K variant: it's on a vietnamese site. It works too. Have installed it twice so far.
Click to expand...
Click to collapse
@zamzenos I really don't understand your message, you have installed what? and in whic devices?
at the end my question is: there are some hardware differences? or n935s/l/k are exactely the same and they have interchangeable firmware?
malaccio said:
three firmware has different cusomized setting menu, I don't know if the three firmware are compatibles each other.
@zamzenos I really don't understand your message, you have installed what? and in whic devices?
at the end my question is: there are some hardware differences? or n935s/l/k are exactely the same and they have interchangeable firmware?
Click to expand...
Click to collapse
Variant K = n935k. I assume that it's best to match firmware to what you already have. I have already installed the K stock on my n935k FE. You are looking for the K variant, yes? I told you where you might find it and also that it is OK to use.
I have n935k model and I m looking for K version of the firmware in order to have the original firmware in case during the S firmware flashing something goes wrong..
Do u have a link for the k version? I didnt find it on google
malaccio said:
I have n935k model and I m looking for K version of the firmware in order to have the original firmware in case during the S firmware flashing something goes wrong..
Do u have a link for the k version? I didnt find it on google
Click to expand...
Click to collapse
try this: https://drive.google.com/uc?id=0B40ItdHKfkyQMy01Z0xMNXJ5dWs&export=download
Has anyone tried flashing the n935s firmware on n935k? Does it work ?
Sent from my SM-N935K using Tapatalk
DarkManX4lf said:
Has anyone tried flashing the n935s firmware on n935k? Does it work ?
Sent from my SM-N935K using Tapatalk
Click to expand...
Click to collapse
yes, i tried it. there are a few new settings options, and different splash screen but nothing special in my opinion. i flashed back to the K version about 30 minutes later.
cortez.i said:
yes, i tried it. there are a few new settings options, and different splash screen but nothing special in my opinion. i flashed back to the K version about 30 minutes later.
Click to expand...
Click to collapse
Ah ok. I was hoping there would be an option to enable VoLTE for T-Mobile.
DarkManX4lf said:
Ah ok. I was hoping there would be an option to enable VoLTE for T-Mobile.
Click to expand...
Click to collapse
do you know for sure it's not working? for example, if you dial voicemail, do you still have the LTE icon on your phone signal? that's what i did and i also checked, Settings->About Phone->Status->Sim Card status and while i was connected to voice mail, mobile network type remained LTE.
cortez.i said:
do you know for sure it's not working? for example, if you dial voicemail, do you still have the LTE icon on your phone signal? that's what i did and i also checked, Settings->About Phone->Status->Sim Card status and while i was connected to voice mail, mobile network type remained LTE.
Click to expand...
Click to collapse
Yeah it doesn't work. Well this is how I have been checking. While on a phone call I try to view a webpage and it won't load or I try to run a speed test and it won't run. While on a call it shows LTE+ in the status bar but just no data passing through.
While on a call, I checked Settings->About Phone->Status->Sim Card status and it says LTE but like mentioned just can't access anything data related.
Sorry I maybe mixing up VoLTE and using data (specifically LTE data and not WiFi) while on a phone call. After doing some research these are two different things.
My issue is using data while on a call.
BerndausLB said:
Could you specify "a few new settings options" please?
Click to expand...
Click to collapse
unfortuantely, i can't remember the differences.
Just to inform you that N935L version has no customized menu.
N version has one entry in the main settings (between connection and sound)
S version has two entry in the main settings (between connection and sound and one after applications)
Sorry.. i mean k version
Done!
malaccio said:
Just to inform you that N935L version has no customized menu.
N version has one entry in the main settings (between connection and sound)
S version has two entry in the main settings (between connection and sound and one after applications)
Click to expand...
Click to collapse
Does flashing a different version wipe your phone data?
cosimor said:
Does flashing a different version wipe your phone data?
Click to expand...
Click to collapse
Yes it does. But you can easily backup your Data via Samsung Cloud or Smart Switch.
Does flashing a K rom to a S device break KNOX? TIA.
Hi guys looks like we have a new G981U1UEU1ATF1 being pushed to S20 devices.
I saw this on Sammobile last night, downloaded to one of my VMs overnight (free member download speeds around 500KB/S ugh!).
Installing now, actually finished first boot as I'm typing this...
Properties indeed show ATF1 now.
SM-G988U1 USA Unlocked here.
So if you're impatient and not going to wait for OTA, this is a safe bet.
Is there any difference in ATF1 vs ATE4 ?
Or are they basically the same?
I noticed the camera video stabilization has been fixed in ATF1
Now 5G able to be select on network mode.
Yes you are right now 5g band show up and can be selected.
farookh said:
Yes you are right now 5g band show up and can be selected.
Click to expand...
Click to collapse
How did you go to that menu? I downloaded the update but I am still unable to change network mode (no option) SM-G988U1 here.
Thank you!
Use the service menu code
*#2263#
What is the camera version on this one?
10.0.03.10
farookh said:
Use the service menu code
*#2263#
Click to expand...
Click to collapse
Mine says RAT Selection option is restricted :|
Any reason why?
xxxrichievxxx said:
Mine says RAT Selection option is restricted :|
Any reason why?
Click to expand...
Click to collapse
depends on carrier and csc also
farookh said:
10.0.03.10
Click to expand...
Click to collapse
Same as ATE6. Bummer.
I flashed this on my ATT S20 Ultra and to try to keep Wifi Calling, I flashed the most recent G988U CSC (i tried both Home and the regular CSC from that firmware) and unfortunately, when it booted up and I completed setup, I wolud always get FC's whenever I tried to use the Phone to make a call. I tried everything I could think of including doing a Factory Reset and nothing helped.
(I had done these exact same steps on previous versions of the firmware - (May, APril, etc) and I never had issues with the PHone apk like I am having this time.) Am I missing something ?