This ROM is for on the SO-02E (NTT docomo) variant of the Xperia Z and is fully stock with all the docomo bloatware with the exception of being rooted and having SuperSU and XZDualRecovery installed. No default files have been tweaked in anyway.
I made this ROM using the [NUT]'s guide.
I tested this on my SO-02E and everything seem to works.
No reboot issue when mounting the system as R/W and no issues booting into recovery.
No data should be lost and all apps are retained when upgrading so you should be good - but backup your data just in case.
Prerequisite:
Rooted 10.1.D.0.343 (others should work)
XZDualRecovery Installed (tested w/2.7.94-BETA)
Installation:
1. Copy SO-02E_10.3.1.B.0.256.flashable_v2.zip to your SDCard
2. Boot into recovery (I use TWRP)
3. Flash SO-02E_10.3.1.B.0.256.flashable_v2.zip
4. Wipe cache/dalvik
5. Power off
6. Flash SO-02E_10.3.1.B.0.256_stripped.ftf with Flashtool (make sure nothing is ticked)
7. Reboot (may take some time upon first boot so don’t freak out!)
Profit!!!
Stock Odexed Files:
SO-02E_10.3.1.B.0.256_stripped.ftf (MD5 = 44a4cf5da0798e3f420ca65d2469d9ad)
Download
SO-02E_10.3.1.B.0.256.flashable_v2.zip (MD5 = e3b6a6d39446ff24ef206756bdfccfd5)
Download
Change log
V1: Initial Version with XZDualRecovery 2.7.94-BETA
V2: updated with XZDualRecovery 2.7.95-BETA
Warning!!!
If you experience a bootloop or if it get’s stuck on the splash screen, then boot into TWRP and do a factory restore (you will lose everything). It may take up to 10 minutes to boot up so be patient.
[MOD] Stock ROM 10.3.1.B.0.256 Deodexed and zipaligned
Installing this mod will deodex and zipalign 10.3.1.B.0.256.
I used dsixda's Android Kitchen to make this package.
Prerequisite:
Rooted stock 10.3.1.B.0.256
Installation:
1. Copy SO-02E_10.3.1.B.0.256_deodex.zip to your SDCard
2. Boot into recovery (I use TWRP)
3. flash SO-02E_10.3.1.B.0.256_deodex.zip
4. Wipe cache/dalvik
5. Reboot (may take some time upon first boot so don’t freak out!)
Profit!!!
SO-02E_10.3.1.B.0.256_deodex.zip (MD5 = a8e676e05f8f282f828042009381b89d)
Download
lancebuks said:
Installing this mod will deodex and zipalign 10.3.1.B.0.256.
I used dsixda's Android Kitchen to make this package.
Prerequisite:
Rooted stock 10.3.1.B.0.256
Installation:
1. Copy SO-02E_10.3.1.B.0.256_deodex.zip to your SDCard
2. Boot into recovery (I use TWRP)
3. flash SO-02E_10.3.1.B.0.256_deodex.zip
4. Wipe cache/dalvik
5. Reboot (may take some time upon first boot so don’t freak out!)
Profit!!!
SO-02E_10.3.1.B.0.256_deodex.zip (MD5 = a8e676e05f8f282f828042009381b89d)
Download
Click to expand...
Click to collapse
This Rom is 4.2 or 4.3 ?
anakdayak said:
This Rom is 4.2 or 4.3 ?
Click to expand...
Click to collapse
This is 4.2, NTT docomo hasn't released 4.3 yet.
Related
This is latest KK flashable zip via CWM over jelly bean, so don't worry if you can't download FOTA, just flash cwm recovery on your JB and flash this, You can also flash it if you are already on FOTA KK just in case you messed it up by deleting some system file, in other words, it's a stock KK rom flashable on both stock JB and stock KK[-fota only] :victory:
INSTRUCTIONS TO FLASH CWM-
1.See my ROOT MODS EVERYTHING THREAD
2.See CWM recovery for JB in recovery secion here :fingers-crossed:
REMOVED APPLICATIONS-
1.Frog Burst
2.Crome
3.Google Maps
4.Google Drive
5.Hangouts
6.Youtube
7.Fukrey Run
INSTRUCTION TO FLASH ROM-
1.You must have CWM, as I said above
2.If you have already flashed CWM then only proceed
3.Place ROM in your sdcard
4.Wipe data/factory reset
5.Wipe dalvik cache
6.Flash ROM from sdcard
7.Reboot and enjoy
DOWNLOAD-
MEDIAFIRE
I was not able to flash FOTA...AND u made it very easier.
I will flash it tomorrow.
U won my heart...
And One question, is it pre rooted.?
Sent from my Micromax A120 using XDA Premium 4 mobile app
Have you deodexed this?
umangleekha said:
This is latest KK flashable zip via CWM over jelly bean, so don't worry if you can't download FOTA, just flash cwm recovery on your JB and flash this, You can also flash it if you are already on FOTA KK just in case you messed it up by deleting some system file, in other words, it's a stock KK rom flashable on both stock JB and stock KK[-fota only] :victory:
INSTRUCTIONS TO FLASH CWM-
1.See my ROOT MODS EVERYTHING THREAD
2.See CWM recovery for JB in recovery secion here :fingers-crossed:
REMOVED APPLICATIONS-
1.Frog Burst
2.Crome
3.Google Maps
4.Google Drive
5.Hangouts
6.Youtube
7.Fukrey Run
INSTRUCTION TO FLASH ROM-
1.You must have CWM, as I said above
2.If you have already flashed CWM then only proceed
3.Place ROM in your sdcard
4.Wipe data/factory reset
5.Wipe dalvik cache
6.Flash ROM from sdcard
7.Reboot and enjoy
DOWNLOAD-
MEDIAFIRE
Click to expand...
Click to collapse
I Am Using Jellybean 4.2.2 c2c 8GB I am getting Update of kitkat from software update in about my phone is rooted And cwm is Installed ITs Safe?? Flash This Rom via CWM?
I m in stock kitkat version flashed via sp flash tools,(501mb file)
I want to try darkl or cleankat ROM
What I have to do shift to custom
Rom
Sent from my AO5510 using XDA Free mobile app
It freezed my phone
umangleekha said:
This is latest KK flashable zip via CWM over jelly bean, so don't worry if you can't download FOTA, just flash cwm recovery on your JB and flash this, You can also flash it if you are already on FOTA KK just in case you messed it up by deleting some system file, in other words, it's a stock KK rom flashable on both stock JB and stock KK[-fota only] :victory:
INSTRUCTIONS TO FLASH CWM-
1.See my ROOT MODS EVERYTHING THREAD
2.See CWM recovery for JB in recovery secion here :fingers-crossed:
REMOVED APPLICATIONS-
1.Frog Burst
2.Crome
3.Google Maps
4.Google Drive
5.Hangouts
6.Youtube
7.Fukrey Run
INSTRUCTION TO FLASH ROM-
1.You must have CWM, as I said above
2.If you have already flashed CWM then only proceed
3.Place ROM in your sdcard
4.Wipe data/factory reset
5.Wipe dalvik cache
6.Flash ROM from sdcard
7.Reboot and enjoy
DOWNLOAD-
MEDIAFIRE
Click to expand...
Click to collapse
Hey, flashing this rom soft bricked my phone when i rebooted for the second time, so i had to restore back to JB. But then i again installed KK FOTA and before rebooting for the second time i flashed CleanKat into it. Its been working fine since then.
So right now im on TW 4.3 and wanted to upgrade to 4.4.4 GPE from here. Here are the steps I followed (from here):
First time installing a 4.4.2 ROM:
0. Root and install safestrap v3.72
1. Copy files from above to extSdCard
2. Reboot into Safestrap Recovery
3. Wipe... Advanced Wipe... everything except extSdCard
4. Install... 4.4.2 ROM
5. Install... ATT_MLD_Modules.zip (to fix wifi)
6. Install... UPDATE-SuperSU-v2.01.zip (to keep root)
7. Home... Reboot... Download (to reboot into download mode)
8. On PC, open Odin and flash files from MLD Odin Files folder.... BL AP CP
9. Phone will reboot automatically
10. Check APN settings and configure if necessary
Click to expand...
Click to collapse
I get the first part of the boot animated then it just starts flickering and my phone gets hot. I can restore to my backup fine. Im just wondering what am I doing wrong? I'm sorta new to this stuff but I installed a 4.3 rom before just fine.
Requirements:
Sony Xperia Z2 Tablet (SGP511) with root and recovery.
Instructions:
Download: SGP511_23.0.1.A.4.30_R2B_RU_flashable.zip (1023,9 MB ), mirrior: mega
Copy SGP511_23.0.1.A.4.30_R2B_RU_flashable.zip on SDCARD.
Go to recovery.
Install SGP511_23.0.1.A.4.30_R2B_RU_flashable.zip.
Wipe Cache/Dalvik.
Reboot the system.
If you want: deodex
How to flash 3.10+ Kernel Roms(android 6.0 & greater) on Lenovo A536
warning:For this kernel Roms ,Do not flash from any rom based on 3.4.67 to kernal 3.10.+ based roms (that is 3.10+ roms from android 6.0 or greater) directly,except Lollipop 5.0 as it is lollipop,If you ignore my warning and try to flash to marshmallow or nougat (of kernal 3.10+) from any roms that running on kernal 3.4.67,You will loose your IMEI and communication module will not work
Indeed there are many method to recover IMEI,but I dont want You to go through that,
Solution is You must 1st flash Lollipop 5.0 (3.10) from any roms,then flash any other roms of kernel 3.10+ (marshmallow,nougat roms).In other word we can say,Lollipop 5.0 (3.10+) will be base rom for any other rom running in kernal 3.10+
Details (this method is used flash 3.10+ kernal rom -android 6.0 and above)
Method 1
*download Lollipop 5.0 rom and its necessary patches.
*extract the boot.img and system.img from the archive (Lollipop 5.0 )
*copy boot.img , system.img and its patch to root folder of sdcard
*go to recovery (custom)
*wipe data and cache(optional- wipe everything)
*flash img files boot.img and system.img (from Lollipop 5.0 )
*apply the patches immediately
*download & flash gapps (optional)
*after that reboot to system(Lollipop 5.0 )
*then reboot to recovery again (custom)
*download your marshmallow/nougat rom
*wipe data and cache
*flash the Rom(zip)from twrp
*flash its gapps(for your rom type,donot flash wrong type gapps version ,choose according to android version you have)
*reboot to system and enjoy
Method 2(recommended)
*download Lollipop 5.0 rom and its necessary patches.
*extract the boot.img and system.img from the archive (Lollipop 5.0 )
*copy boot.img , system.img and its patch to root folder of sdcard
*go to recovery (custom)
*wipe data and cache(optional- wipe everything)
*flash img files boot.img and system.img (from Lollipop 5.0 )
*apply the patches immediately
*download & flash gapps (optional)
*after that reboot to system(Lollipop 5.0 )
*then reboot to recovery again (custom)
*download your marshmallow/nougat rom
*extract the boot.img and system.img from the archive (marshmallow/nougat rom)
*copy boot.img , system.img root folder of sdcard (marshmallow/nougat rom)
*wipe data and cache
*flash the boot.img and system.img(marshmallow/nougat rom)
*flash its gapps(for your rom type,donot flash wrong type gapps version ,choose according to android version you have)
*reboot to system and enjoy
Method 3
*do a map patch for Lollipop and turn off the phone
*Download lollipop(Lollipop 5.0 )
*Unpack it.
*get scatter file from archive(lollipop scatter file)
*flash through sp-flashtool(lollipop )
*go to custom recovery applay patches,wipe date and cache and then again turn phone off
*Download marshmallow/nougat
*get scatter file from archive(marshmallow/nougat)
*flash through sp-flashtool(marshmallow/nougat)
*flash gapps
*reboot to system and enjoy
If You are already in any ROM based on 3.10+ kernel ,you don't want to go through these steps/method again, just flash normally through recovery(custom)
can i upgrade my kernel without pc?
jsabigan9 said:
can i upgrade my kernel without pc?
Click to expand...
Click to collapse
Yeah. When you want to download the rom either through wifi, which takes eternity, or waste LOTS of mobile data. But anyways you need to get TWRP or CWM, which is impossible without a pc.
I Installed dual boot patcher app on my samsung galaxy note 4. But when i click on rom. The primary rom (stock rom) is not shown. I am getting error "failed to load mbtools".
I have attached the screenshot. Please can anybody help.
Many thanks
Sunil
is your device rooted?If not well that the problem.find out how to root your device
adamharris7890 said:
is your device rooted?If not well that the problem.find out how to root your device
Click to expand...
Click to collapse
I have the problem only in android 8.1 (resurrection remix oreo 8.1) on gs5 (klte)
but in official rom (touchwiz 6.0.1) no problem with mbtool...
but... if i enter dual boot rom, it gets stuck at the kernel (dual boot not working even though mbtool is working)
and yes i have root and everything
without mbtool
sunilnair21 said:
I Installed dual boot patcher app on my samsung galaxy note 4. But when i click on rom. The primary rom (stock rom) is not shown. I am getting error "failed to load mbtools".
I have attached the screenshot. Please can anybody help.
Many thanks
Sunil
Click to expand...
Click to collapse
Hi Sunil,
Important note: after trying out a few custom roms, not sure why anyone would desperately need to go custom on the S7 at the moment - Android 8 still gets security updates and has nearly all the features a custom would offer. If the only reason to go to Android Pie or higher is the look, would not a launcher do the job?
Same issue on Samsung S7, could not find a workaround. Here is what I'm testing to rom switch and it seems like it could achieve what is the desired outcome.
------------------
- Backup process -
------------------
Stock
1. Backup apps (with Super Backup), app data also, if you have root. - either set SD Card as save location or copy to it, to hold them through a flash/wipe.
Custom
2. Boot TWRP recovery (Vol up + Home + Power)
3. Backup to SD Card (with Recovery)
-------------------
- Restore process -
-------------------
Stock
1. Flash all (with Odin)
1. Restore apps by opening the apk's or use Super Backup if you have root* and want the app data.
Custom
2. Boot TWRP recovery (Vol up + Home + Power)
3. Install the custom rom and Gapps zips (with Recovery)
4. Wipe Data; Format Data + Advanced Wipe - Caches, Internal (with Recovery)
5. Restore from SD Card (with Recovery)
*requires TWRP is flashed into recovery partition and Magisk installed and Manager app to setup environment, you'll probably need the static BusyBox binary through Manager downloads or grabbed from Google Play.