I apologise in advance if im posting in the wrong place
ive recently been experimenting with roms (cynomogen11 4.3)
The rom was working okay but has some defects (camera not working etc) so I tried reverting back to my stock rom.
I read a guide on FULL WIPE of i9505 and followed these instructions before installing the stock rom again: http://forum.xda-developers.com/showthread.php?t=2354122
unfortunately I got a failed message on Odin so disconnected my device and reinstalled stock rom. It all installed fine but a lot of features on my stock rom now dont work
When I dial out my phone rings out but my screen is blank and I cant hear anyone on my end and they cant hear me, also my music app doesnt recognise mp3 and my speakers don't seem to work at all, so please if anyone can point me in the right direction I would be much appreciated, thank you in advance
kevstacey said:
I apologise in advance if im posting in the wrong place
ive recently been experimenting with roms (cynomogen11 4.3)
The rom was working okay but has some defects (camera not working etc) so I tried reverting back to my stock rom.
I read a guide on FULL WIPE of i9505 and followed these instructions before installing the stock rom again: http://forum.xda-developers.com/showthread.php?t=2354122
unfortunately I got a failed message on Odin so disconnected my device and reinstalled stock rom. It all installed fine but a lot of features on my stock rom now dont work
When I dial out my phone rings out but my screen is blank and I cant hear anyone on my end and they cant hear me, also my music app doesnt recognise mp3 and my speakers don't seem to work at all, so please if anyone can point me in the right direction I would be much appreciated, thank you in advance
Click to expand...
Click to collapse
Try this one mate Link flash it via odin by selecthing cp.
Appreciate the help bud the link seems to direct me to a page with no download though?
I think my problem is samsung knox, my phone says know warranty void 0x1, will this fix it do you think?
Thanks again
kevstacey said:
Appreciate the help bud the link seems to direct me to a page with no download though?
I think my problem is samsung knox, my phone says know warranty void 0x1, will this fix it do you think?
Thanks again
Click to expand...
Click to collapse
try to reflash the ROM , sometimes it happens
:good::good::good:
regards,
kabise
Related
i,ve searched and there was an old thread that came out for his forum, but its months old and i couldnt find any solution in that thread, so i was wondering if anyone had the same problem as me?
sometimes my phone would drop called juz like that, sometimes 5 secs into the conversation, the other person on the line cant hear me, but i can hear her, this worsens as i,m driving and on the phone at the same time, it disconnects like mad, anyone got this problem solved, mind sharing ur solution with me? thanks a lot in advance
on a side note, i flashed a dutty rom recently, i think its the 3.6 version, do i have to flash the old rom back so that my phone is valid for warranty? meaning does the dutty rom void my warranty?
jeffhakase said:
on a side note, i flashed a dutty rom recently, i think its the 3.6 version, do i have to flash the old rom back so that my phone is valid for warranty? meaning does the dutty rom void my warranty?
Click to expand...
Click to collapse
you will need to flash back to original Rom, or warranty will most likely be voided.
As for loss of signal sometimes this occurs from the actual signal lost from towers it may not be a phone problem, seeing as it happens more when you are driving.
Before sending back why not Hard reset first or even upgrade to Duttys 3.9 Rom
Another thing would be to flash a different radio I have seen on this site that it helps with signal loss
Check the wikis they will give you step by step instruction if you desire to go back to original Rom
please help im wishing to upgrade my offical rom from 1.43 to 1.48 but says my phone is not suitable??????im totally thick coming from nokia to windows,i did use search but was unable to find the answer.
thanks phil
Hello and welcome on board,
Can you post up the exact error message you are getting please?
Also read this thread...http://forum.xda-developers.com/showthread.php?t=609477 which you will fond useful and come back with any questions.
Incidentally you are not a fool for asking as long as you have searched first.
WB
hi mate thanks for the reply,when i go to the htc offical rom download,i'm asked to enter my serial number,which i do but says my device is not suitable and won't let me proceed any further??
cheers phil
got a major problem now ive tried to update to 1.48 but it crashed now i get a warning traingle on start up,and can go into bootloader screen and it says upgrade rom code error please try again???someone please help.i hope i havent bricked my phone
Is your HD2 branded? (bought it in combination with a contract?)
hi mate its on vodafone contract buts its not branded.
Hi again,
Have you tried to hard reset your phone to see if the old rom boots up again?
If it does not then you might want to reflash your existing rom onto your phone using the SD card method (look at the threads at the top of the Rom Development page to find what you are looking for).
If it works and you are still keen to upgrade the rom you need to read the threads on using either the Goldcard or HardSPL methods to upgrade.
Come back and let us know how you got on.
WB
hi mate i was having the exact same probs as the chap in the hd2 bricked thread,same messages etc and stopping at 9% i took there advice and reflashed the hpsl again which has worked a treat,i'm now a little dubious bout trying to upgrade as i don't fancy bricking it.
ive emailed htc to see why i cant upgrade from 1.43 to 1.48 seems odd it says my phone isnt suitable.
p.s thanks for the help mate much appreciated
OK, wait until you hear back from them. However if you are now up and running and have installed HardSPL, I think you will find that flashing a new radio on its own might help solve your problems.
I think if you look at the thread you were referring to (this one...http://forum.xda-developers.com/showthread.php?t=618084), IIRC, MysticGenius runs through a procedure for doing this that helped him sort out a similar problem.
Good luck with it.
WB
PS: Lesson learned here though is to read exhaustively on the topics on here BEFORE jumping in as fixing problems later can be both time consuming, if you are lucky, and a pain in the rear. As for that horrible sick feeling you get when you think you have bricked £500 worth of phone....wouldn't recommend it to my worst enemy!
WB
Hi! I hope that there is someone here able to help me...
I`m having the following issue:
My brand new phone Nexus 4 ( unrooted ) was fine until i have decided to roll out the 4.2.2 update directly from "check for software" tab.
After this update, I`m not able to hear anyone when I`m calling someone. The connection is made and the seconds keep running...but I can`t hear the other person and the other person can`t hear me as well.
I read here that it could be a problem with radio baseband. I looked into About phone tab but the radio version is .48
In the meantime i tried to downgrade to 4.2.1 and even to 4.2 with radio .33 but in call audio is still not working
What else can I do? I`m opened to suggestions.
I flashed PacMan Rom from here which is great but the issue is still not fixed. I`m attaching a picture from my current "about phone" tab.
Any suggestions?
PS: If I dial the emergency number "112" I`m able to hear the other person and she can hear me too ... just tested. So..I don`t think that`s a hardware issue. Right ?
PS2: I`m sure that the phone speaker and microphone are fine since i`m able to do voice search, watching youtube videos, etc.
Thank you! I really hope that someone will have a clue about what`s going on with my device.
If needed I can provide any other additional information or generate a bugreport.
Thank you!
hitronro said:
Hi! I hope that there is someone here able to help me...
I`m having the following issue:
My brand new phone Nexus 4 ( unrooted ) was fine until i have decided to roll out the 4.2.2 update directly from "check for software" tab.
After this update, I`m not able to hear anyone when I`m calling someone. The connection is made and the seconds keep running...but I can`t hear the other person and the other person can`t hear me as well.
I read here that it could be a problem with radio baseband. I looked into About phone tab but the radio version is .48
In the meantime i tried to downgrade to 4.2.1 and even to 4.2 with radio .33 but in call audio is still not working
What else can I do? I`m opened to suggestions.
I flashed PacMan Rom from here which is great but the issue is still not fixed. I`m attaching a picture from my current "about phone" tab.
Any suggestions?
PS: If I dial the emergency number "112" I`m able to hear the other person and she can hear me too ... just tested. So..I don`t think that`s a hardware issue. Right ?
PS2: I`m sure that the phone speaker and microphone are fine since i`m able to do voice search, watching youtube videos, etc.
Thank you! I really hope that someone will have a clue about what`s going on with my device.
If needed I can provide any other additional information or generate a bugreport.
Thank you!
Click to expand...
Click to collapse
Flash back baseband .48. It worked for me. I had the same issue.
Sent from my Nexus 4 using Tapatalk 2
Thanks for your reply, but already tried that with no luck
Any other suggestions?
I had the same issue, but flasing the 4.2.2 base band solved the problem.
Before that, I rolled back to 4.2.1 (stock reset), then update to 4.2.2.
Yeah...I tried this as well but still can`t hear anyone.
I tried with some old baseband as well. Nothing seems to work.
Don`t know what else should I try.
Basically I tried 4.2 with all 3 different basebands, then I tried 4.2.1 with all basebands, then I tried 4.2.2 with all basebands.
And I did the same for two other custom roms. Nothing seems to fix this issue.
But I still don`t think to be a hardware issue since I can hear the lady from 112(emergency number)
I think that it might be something related to the Radio Band Frequency or something like that.
When I`m in the "secret menu" *#*#4636#*#* most of the times, the phone is set up for "WCDMA Preferred " and I don`t know if this is OK or not.
I did try to change it to GSM only or other mods, but this didn`t fixed my issue.
Also when I try to hit the button from the lower right corner with Select Radio band, the app is crashing. See the 2 attached image of this post.
I read on this forum about this bug as well...and I even tried a custom ROM with this bug fixed. But the only option included in that ROM was "USA BAND" , and since I`m not in USA, I didn`t see the point on trying it. I didn`t want my phone to be locked on a USA BAND.
As far as I read, in the original version of 4.2.2 there should be around 6-7 different Radio Bands to choose from. But ...the original stock rom is crashing right now.
Any other points of view / solution?
Thank you!
Hi,
I had the same issue. No sound with 4.2.2, but everything fine with 4.2.1. There were also others symptoms with 4.2.2: very long boot time, and the PIN dialogbox did not show immediately after boot, but after several minutes.
I call the support and got my phone exchanged without much negociation. My first phone was a Rev_10 hardware. The new is a Rev_11, and the 4.2.2 update worked well on it.
May be a bad production batch...
Hello everyone,
I'm new to this forum and i installed crash rom according to the instructions on the thread of the rom.
the ROM works great and is really fast, but the problem is, that i cannot call or send SMS (or recieve) for some reason...
I have installed and changed many roms on my last phone the S2 I9100, but never encountered such a problem.
I don't know what to do and need help
thanks in advance...
wava11 said:
Hello everyone,
I'm new to this forum and i installed crash rom according to the instructions on the thread of the rom.
the ROM works great and is really fast, but the problem is, that i cannot call or send SMS (or recieve) for some reason...
I have installed and changed many roms on my last phone the S2 I9100, but never encountered such a problem.
I don't know what to do and need help
thanks in advance...
Click to expand...
Click to collapse
First of all check if your IMei number is there or not by dialing *#06# if it shows random numbers like 01010 or blank then i guess you efs folder is screwed
If not then just go ahead and try flashing the rom again or try a new radio
manu44 said:
First of all check if your IMei number is there or not by dialing *#06# if it shows random numbers like 01010 or blank then i guess you efs folder is screwed
If not then just go ahead and try flashing the rom again or try a new radio
Click to expand...
Click to collapse
thanks for the quick response
i checked the imei and its fine
i'll try to flash the newer version which just came out and see if the problem is solved...
and what do you mean by flashing a new radio?
wava11 said:
Hello everyone,
I'm new to this forum and i installed crash rom according to the instructions on the thread of the rom.
the ROM works great and is really fast, but the problem is, that i cannot call or send SMS (or recieve) for some reason...
I have installed and changed many roms on my last phone the S2 I9100, but never encountered such a problem.
I don't know what to do and need help
thanks in advance...
Click to expand...
Click to collapse
U can also try putting phone in air plane mode for 10 sec and off see it u get signal
.
Display is not working but sound, touch , volume keys are working after flashing stock ROM.
Please help me.
munsuyog said:
Display is not working but sound, touch , volume keys are working after flashing stock ROM.
Please help me.
Click to expand...
Click to collapse
Contact service center
Please be clear with your problem If you need help
munsuyog said:
Display is not working but sound, touch , volume keys are working after flashing stock ROM.
Please help me.
Click to expand...
Click to collapse
Mine worked perfectly after I have flashed stock rom but now again I have flashed MiUI 8 for it.
May be you have been using over charging.
munsuyog said:
Display is not working but sound, touch , volume keys are working after flashing stock ROM.
Please help me.
Click to expand...
Click to collapse
Please tell me the link you downloaded the stock ROM then maybe I can help.
Sharath Guddad said:
Please tell me the link you downloaded the stock ROM then maybe I can help.
Click to expand...
Click to collapse
I have flashed a stock ROM on my mobile phone with S/N: HB0M78ZW(10). its a dual sim. Previosuly I have rooted the phone and put back to original state (unroot). I am not sure if I flashed the correct version/baseband (if there is) as right now even though I turned the mobile data in the settings I cannot see any display on my screen that I am connected to it. Worse is, my network signal is on the maximum level and I cannot receive and make outgoing calls as well.
Can someone help me to solve this problem? or can some of youu tell me what is the problem? As I already tried to reflash with other version of ROM and just last night my phone got updated to S036_160822.
I don't need an updated rom I just wanted my phone to work correctly as I bought it for the first time. and I don't know which stock rom should I download as I am seeing a lot of it in the internet.
Question:
1.Did I flashed a wrong baseband?
2. If I will file a complain to lenovo and have it warrantied will they be see that I flashed or roorted my phone previously on my own?
I hope someone will help me on this as I am desperate to solve this problem.
ralphsales said:
I have flashed a stock ROM on my mobile phone with S/N: HB0M78ZW(10). its a dual sim. Previosuly I have rooted the phone and put back to original state (unroot). I am not sure if I flashed the correct version/baseband (if there is) as right now even though I turned the mobile data in the settings I cannot see any display on my screen that I am connected to it. Worse is, my network signal is on the maximum level and I cannot receive and make outgoing calls as well.
Can someone help me to solve this problem? or can some of youu tell me what is the problem? As I already tried to reflash with other version of ROM and just last night my phone got updated to S036_160822.
I don't need an updated rom I just wanted my phone to work correctly as I bought it for the first time. and I don't know which stock rom should I download as I am seeing a lot of it in the internet.
Question:
1.Did I flashed a wrong baseband?
2. If I will file a complain to lenovo and have it warrantied will they be see that I flashed or roorted my phone previously on my own?
I hope someone will help me on this as I am desperate to solve this problem.
Click to expand...
Click to collapse
You said display isn't working. Please be clear.
what do you mean by "display not working?" , you said touch is working how did you confirm ? be specific.
ralphsales said:
I have flashed a stock ROM on my mobile phone with S/N: HB0M78ZW(10). its a dual sim. Previosuly I have rooted the phone and put back to original state (unroot). I am not sure if I flashed the correct version/baseband (if there is) as right now even though I turned the mobile data in the settings I cannot see any display on my screen that I am connected to it. Worse is, my network signal is on the maximum level and I cannot receive and make outgoing calls as well.
Can someone help me to solve this problem? or can some of youu tell me what is the problem? As I already tried to reflash with other version of ROM and just last night my phone got updated to S036_160822.
I don't need an updated rom I just wanted my phone to work correctly as I bought it for the first time. and I don't know which stock rom should I download as I am seeing a lot of it in the internet.
Question:
1.Did I flashed a wrong baseband?
2. If I will file a complain to lenovo and have it warrantied will they be see that I flashed or roorted my phone previously on my own?
I hope someone will help me on this as I am desperate to solve this problem.
Click to expand...
Click to collapse
if your bootloader is unlocked then warranty gets void