[Q] Samasung Galaxy S4 SGH-S970G Help Plz!!!! - Galaxy S 4 Q&A, Help & Troubleshooting

Ok, so first off I rooted my previous phone (a Verizon Motorola Droid X2) without any problems ever. I dropped Verizon as my carrier and switched to Straight Talk and I bought the Samsung Galaxy S4, after a few months of having it I decided to look for a way to root it. After a few days of browsing and reading about I found and root option that worked. (http://forum.xda-developers.com/showthread.php?t=2565758) This saferoot worked and i had superuser and was able to do everything i wanted to.
I then went on the Google play store and installed apps that I previously had on my old device for rooted phones. Well I installed chainfire3D and opened it up and clicked install the drives (which then requires a reboot) after a sort time I noticed my phone was stuck on the loading screen and I can't get past it.
I then start looking for a unroot/unbrick option in order to restore my phone to default firmware and factory settings to get it to work again.
Now here is the dilemma...
Like it says in the title, the phone model is SGH-S970G and for the life of me I can't find this model's firmware anywhere.
plz help me asap!!!!
Thank you in advance for any useful information to help point me in the right direction or give me a solution!

Chuggalo said:
Ok, so first off I rooted my previous phone (a Verizon Motorola Droid X2) without any problems ever. I dropped Verizon as my carrier and switched to Straight Talk and I bought the Samsung Galaxy S4, after a few months of having it I decided to look for a way to root it. After a few days of browsing and reading about I found and root option that worked. (http://forum.xda-developers.com/showthread.php?t=2565758) This saferoot worked and i had superuser and was able to do everything i wanted to.
I then went on the Google play store and installed apps that I previously had on my old device for rooted phones. Well I installed chainfire3D and opened it up and clicked install the drives (which then requires a reboot) after a sort time I noticed my phone was stuck on the loading screen and I can't get past it.
I then start looking for a unroot/unbrick option in order to restore my phone to default firmware and factory settings to get it to work again.
Now here is the dilemma...
Like it says in the title, the phone model is SGH-S970G and for the life of me I can't find this model's firmware anywhere.
plz help me asap!!!!
Thank you in advance for any useful information to help point me in the right direction or give me a solution!
Click to expand...
Click to collapse
If you get your phone fixed, I suggest you skip reinstalling Chainfire 3D. It specifically says it's not for Jelly Bean devices.

Related

[Q] Problems rooting and flashing my Galaxy S4

Hi guys. I've rooted and flashed my s2 countless times and never had any problems, but i've now upgraded to my s4 and every time i've tried to flash a rom on it something has gone wrong. The first time i tried flashing fox hound and my 3G wouldn't work. I then tried flashing my backup and ended up bricking my device. After many long hours I managed to get my phone back to factory setting. A few weeks later I tried again with the google edition Kit Kat Rom, but then the play store wouldn't work. So I tried flashing my back up and yet again bricked my device and spent even longer fixing it. I don't know what I'm doing wrong.. I'm doing everything exactly as I'm told. So I thought I would give it one last try. So I've had to root my phone again, but now after I rooted it I'm not getting Superuser, SU or BusyBox... I'm running Root Checker and it;s not coming off the "Checking for root access" display. As you can probably tell I'm not the best when it comes to technology. If there's someone you can help get me on the right track I would be very grateful.
Oh and also, I've been hearing the words (Verizon and AT&T) etc and I don't know what type of phone i Have. All i know is it is an S4

[Q] Mobile Hotspot TetheringProvision.apk Modification Isn't Working

First off, hi everyone. This is my first post here after browsing for a few weeks. Yesterday I went ahead and rooted my AT&T s4 with the whole reason for doing so wanting to use wireless hotspot for free, and it isn't working.
Tl;dr I tried the TetheringProvision.apk mod technique and it just crashes my settings menu.
Full story:
After softbricking my phone and having to bring it into att 2 days ago I finally figured out a method of rooting it. I got this phone very recently and it came with the 4.4.2 (NB1) update pre-installed. I used the downgrade/root/safestrap method (using the OTA zip method because the stock with root zip wouldn't get past the att splash screen) and am back on 4.4.2/NB1. Everything is working, root included (verified by successfully changing system file names), but when I try to put in the TetheringProvision.apk file that used to work for the hotspot on my old MK2 phone from some other thread on this forum it just crashes my settings menu. The error I get is a "settings has stopped" popup and it kicks me out right when I move the "mobile hotspot on" slider. I'm really hoping there's a simple solution here, but if worst comes to worst I guess I'll just have to try a different rom? Attached is a screen shot of my about device. I really hope someone will be able to help, thanks in advance.
Ok, so I'm now thinking about backing up this rom in safestrap, and re-flashing the backup I made of the MK2 downgrade that I used to install the root. The problem with that was the wifi not working, but I just found a post about bypasslkm. Only problem is that I don't fully understand how to use bypasslkm and even through search I can't find a good guide on it. Could anyone here walk me through the dumbed down version of how to use it? From what I understand I flash the bypasslkm.zip just like I would any other rom, but I don't really get what to do after that. I'm kind of surprised that I'm the first one to have either of these issues, I couldn't find any good information via search.
TaylarRoids said:
First off, hi everyone. This is my first post here after browsing for a few weeks. Yesterday I went ahead and rooted my AT&T s4 with the whole reason for doing so wanting to use wireless hotspot for free, and it isn't working.
Tl;dr I tried the TetheringProvision.apk mod technique and it just crashes my settings menu.
Full story:
After softbricking my phone and having to bring it into att 2 days ago I finally figured out a method of rooting it. I got this phone very recently and it came with the 4.4.2 (NB1) update pre-installed. I used the downgrade/root/safestrap method (using the OTA zip method because the stock with root zip wouldn't get past the att splash screen) and am back on 4.4.2/NB1. Everything is working, root included (verified by successfully changing system file names), but when I try to put in the TetheringProvision.apk file that used to work for the hotspot on my old MK2 phone from some other thread on this forum it just crashes my settings menu. The error I get is a "settings has stopped" popup and it kicks me out right when I move the "mobile hotspot on" slider. I'm really hoping there's a simple solution here, but if worst comes to worst I guess I'll just have to try a different rom? Attached is a screen shot of my about device. I really hope someone will be able to help, thanks in advance.
Click to expand...
Click to collapse
There is a tethering AddOn in the same NB1_100%_Stock_Rooted_ROM & NB1 KeepRoot OTA zip thread that you can flash in safestrap.

[Q] my galaxy s4 is rooted but also not rooted

2 years ago I buy my galaxy s4 unlocked version from amazon.com. When I came back to Turkey I registered the Cellphones imei. After that I rooted my galaxy s4. I watch lots of tutorials and most of it did not work out. At the last try I was able to root my device. After a year my uncle bought me a gear 2 neo which needed a higher version of android. So i plug my galaxy s4 and updated trough kiosk. The result was my galaxy s4 was mys galaxy s4 lost its root acsess was gone and system was updated. Also most of the apps first run and then give a error. For example i downloaded can knockdown 3. First it worked fine then it stopped working. One of my friend suggested I need to downlad a rom and suggested cyanogenmod. I tried one button installer but it said the device is not supperted for this installer. But my phone is listed in the supported devices(GTI9500). Please help me. My cellphone is slowly dying. Also last thing. They say making a change on the phone sometimes deletes the imei registiration.
Just perform a factory reset and your issues will probably be resolved. If you want root again just flash cf auto-root.
I have done it and it hasn't changed. Still the same issues.
aebatirel said:
2 years ago I buy my galaxy s4 unlocked version from amazon.com. When I came back to Turkey I registered the Cellphones imei. After that I rooted my galaxy s4. I watch lots of tutorials and most of it did not work out. At the last try I was able to root my device. After a year my uncle bought me a gear 2 neo which needed a higher version of android. So i plug my galaxy s4 and updated trough kiosk. The result was my galaxy s4 was mys galaxy s4 lost its root acsess was gone and system was updated. Also most of the apps first run and then give a error. For example i downloaded can knockdown 3. First it worked fine then it stopped working. One of my friend suggested I need to downlad a rom and suggested cyanogenmod. I tried one button installer but it said the device is not supperted for this installer. But my phone is listed in the supported devices(GTI9500). Please help me. My cellphone is slowly dying. Also last thing. They say making a change on the phone sometimes deletes the imei registiration.
Click to expand...
Click to collapse
Sounds like your phone may have been corrupted when installing official firmware on top of the root. I would recommend re-flashing your phone with official stock firmware. You can use this website to obtain a stock firmware for your device model
http://galaxys4root.com/galaxy-s4-stock-firmware/
Your imei should not be affected if you re-flash your phone, however just to be on the safe side you can flash a recovery mod such as TWRP Recovery and back up everything such as your efs which contains your imei baseband in case a re-flash causes your phone to not work on cell networks in Turkey (which I'm guessing is not the country your phone was purchased in.) After you have backed up everything in TWRP to your sdcard you can safely reflash stock firmware.

SM-G870A Failing to Update Past 4.4.2

Hey everyone!
I've got an interesting predicament here. A little back story: a while back I installed TowelRoot, and then Xposed Framework. Everything was kosher until I got an OTA update (I believe the NG3 update) and it killed the root. No problem, I'm fine without root. But now that Lollipop has come out, I want to update but can't. My buddy applied the same root, but did not do Xposed. The difference between our phones after that OTA update: mine says "Custom" with an unlocked padlock at the Samsung boot screen; his does not.
I read in another thread that someone took their phone to Best Buy and the guys at the Samsung booth were able to fix the problem because they can pull updates and apply them via USB. So we went there yesterday and they had no problem getting Lollipop on my buddy's S5 Active. Mine, however, would not take the update. The Samsung S.M.A.R.T. tool they use on the PC was saying that "my device is running an unauthorized operating system", even though I have never flashed a custom ROM.
When I go into download mode, the Knox flag does not appear to be tripped. I've also performed a clean factory reset with a data wipe and that still didn't allow me to update. Whenever I try to update, it downloads the entire 4.4.4 update (which needs to be done first, before the 5.0 update) and it starts to install, failing at 25%, without hesitation, every single time.
I've attached a couple of screenshots that I hope will help. Any ideas will be greatly appreciated.
MGArcher007 said:
Hey everyone!
I've got an interesting predicament here. A little back story: a while back I installed TowelRoot, and then Xposed Framework. Everything was kosher until I got an OTA update (I believe the NG3 update) and it killed the root. No problem, I'm fine without root. But now that Lollipop has come out, I want to update but can't. My buddy applied the same root, but did not do Xposed. The difference between our phones after that OTA update: mine says "Custom" with an unlocked padlock at the Samsung boot screen; his does not.
I read in another thread that someone took their phone to Best Buy and the guys at the Samsung booth were able to fix the problem because they can pull updates and apply them via USB. So we went there yesterday and they had no problem getting Lollipop on my buddy's S5 Active. Mine, however, would not take the update. The Samsung S.M.A.R.T. tool they use on the PC was saying that "my device is running an unauthorized operating system", even though I have never flashed a custom ROM.
When I go into download mode, the Knox flag does not appear to be tripped. I've also performed a clean factory reset with a data wipe and that still didn't allow me to update. Whenever I try to update, it downloads the entire 4.4.4 update (which needs to be done first, before the 5.0 update) and it starts to install, failing at 25%, without hesitation, every single time.
I've attached a couple of screenshots that I hope will help. Any ideas will be greatly appreciated.
Click to expand...
Click to collapse
Have you resolved this issue, if so, would you mind sharing how you did it. I've been combing the net for a few days trying to discover what is going on and your issue appears to be exactly what I am experiencing. I've read about flashing back to my stock firmware using Odin but I cannot get into download mode, when I try and get there, the phone only says "recovery reboot" in blue small font on the top of the screen and reboots.
Thanks
Ladies and gents, I apologize for abandoning this thread. I forgot exactly how I got to get the phone to update, but if I recall correctly, it had to do with me putting the phone in download mode, downloading the original firmware and using ODIN to flash it. Afterward, the "unlocked" padlock symbol disappeared and the phone was able to get the OTA update from AT&T.
I have since moved from an LG G4 to a V20 and that is what I am currently playing with. I also have a Samsung Galaxy S6 Edge (which T-Mobile replaced my G4 with when the touch screen stopped responding). I was quite stoked to find out that there is a way to root it and (seemingly) unlock the bootloader, so I'll be toying with that this weekend to see what I can do. I'd love nothing more than to just wipe that Samsung-ified Android and install a vanilla Android or CM.
Good luck to anyone who is still trying to fix this issue. Again, my apologies. I'll dig through my archives and see if I can piece together what I did to get it going again. I still have the S5 Active. Best phone by far. It's a great backup phone for when the new stuff goes kaput.

[Q] Quick Question If Someone Has a Moment, Please

I just swapped from my Amaze 4g, to a used Note 3, and I'm a little lost as far as where I should start.
It says that it's on 4.4.2, and that I cannot update due to a modified system.
Basically, I would like to get updated to 5.1.1 (or as close as is official for the Note 3), and root it.
I'm afraid I'm not familiar with Samsung devices, and because I purchased this from ebay, I don't know how to tell the exact state that the former user put it in (I expected they would return it to stock prior to selling).
It's currently a T-Mobile branded, SM-N900T, on 4.4.2, build is KOT49H, security software MDF v1.0 release 2. Kernel is 3.4.0-660648.
It is supposedly unlocked for carriers, though I have not attempted a SIM card use yet, until I can tell that what I have is a valid device and the IMEI is checked out.
Any thoughts on how to validate the IMEI, and sort out how to get my new phone up to date would be appreciated. As I stated, I expected the vendor would have returned it to stock, but that is clearly not the case, so I don't want to accidentally boot loop it by doing something I shouldn't. I have not owned a Samsung before, so I want to be careful on how it differs from my Nexus 7, Amaze 4g, and Droid X, as they're all obviously very different in the OS area.
Thank you for the help1
Download tbe stock 4.4.2 rom and use odin to install. Then you will get the OTA updates.
Sent from my SM-N900P using Tapatalk
There is no stock 5.1.1 for note 3, only cm12.1/ aosp. Latest is 5.0 and you can use odin to flash. Maybe it's rooted that's why you can't update.
bladebarrier said:
I just swapped from my Amaze 4g, to a used Note 3, and I'm a little lost as far as where I should start.
It says that it's on 4.4.2, and that I cannot update due to a modified system.
Basically, I would like to get updated to 5.1.1 (or as close as is official for the Note 3), and root it.
...
Thank you for the help1
Click to expand...
Click to collapse
Some apps to install from Play Store...
Phone INFO Samsung - this will tell you all about your phone and the firmware etc.
Root Checker Basic - tells you if you are rooted or not.
SuperSU - this is so valuable you should buy the Pro licence. Chainfire does some great work for our phones.
TWRP - I have the zip version on my extSDCard and an Odin version on PC in case I have to rebuild from a Stock firmware. CWN works OK but most ROM builds seem to be for TWRP I think and a backup from one will not work on the other.
I don't know your previous phone so you probably need Odin v3.09 - this sits on PC and lets you flash firmware to the phone. (connected by USB)
For which you need Samsung USB drivers so the PC will recognise the phone. Install on PC before connecting phone.
Then do some browsing and find the processes to root your phone and install the ROM you want. If you just want Stock and access to all your phone, you can root it after flashing the original v5.0 download (from Sammobile or similar site - note on Sammobile you need a free account to DL) and then install Custom recovery (if wanted - it WILL trip the Knox flag but that may not matter given it's 2nd hand and might already be tripped anyway)
Read, make SURE you understand what is being said BEFORE you do anything - ask if you don't.
Good luck...
N9005 Lollipop brick
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode but re flashing the firmware always fails.....is there a solution for this.....please help
Thank you all for the info, especially the detailed info from Journyman16. I checked, and it is flagged as custom, which is fine, so I'm going to go ahead and try to return to mostly stock, update it, and root it.
Ok, everything went well. I had to do two attempts at rooting, but I think it's just one of those things where sometimes it doesn't restart into the process every time.
All seems good. I'm on 5.0, rooted, busyboxed, and smooth sailing.
Thank you all, again, for the tips. The Note 3 is running very well. Thank you to all of the devs that have made this process so refined. I've donated to you before, and did so again today. It's outstanding to have such well versed coders, on XDA, helping out the community.
mjmbirige said:
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode but re flashing the firmware always fails.....is there a solution for this.....please help
Click to expand...
Click to collapse
You have never learned not to ask in others posts? What does your problem has to do with this topic at all?
When you need help. Just click on Q&A then Create a new thread. How hard is it?

Categories

Resources