Related
I'm sorry if this is in the wrong section, but I'm hoping that I can get some help as I was never able to find this solution via Google.
Anyhow, I'm running LiquidSmooth 2.9/Franco.K on a Nexus 4, but I can't seem to figure out for the life of me how to make the OS-integrated quiet hours work. I can't find any guide for setup and they do not seem to be working for me.
Can someone explain if this works on the Nexus or how?
Bump. I know I probably shouldn't do this, but I would really like to know if there's an answer.
I'll assume that Liquid has them under Settings>Sounds>Quiet Hours as well?
It should be as easy as: Enable, set your hours, check the boxes for the things you want disabled, done.
There's no trick to it, and I've never seen it NOT work on a ROM yet, although I've never run Liquid. The only thing it won't do is silence notifications where the app uses the wrong API and uses a ringtone vs a notification tone.
CMNein said:
I'll assume that Liquid has them under Settings>Sounds>Quiet Hours as well?
It should be as easy as: Enable, set your hours, check the boxes for the things you want disabled, done.
There's no trick to it, and I've never seen it NOT work on a ROM yet, although I've never run Liquid. The only thing it won't do is silence notifications where the app uses the wrong API and uses a ringtone vs a notification tone.
Click to expand...
Click to collapse
Hmmm. I wonder if that's the case. I'll have to borrow my brother's phone and experiment. Many thanks!
Switched to this phone from the Moto X...just looking for an app thats similar to moto assist in the aspect i can set up a silent profile at night and have anyone that calls more than once go through? I've seen tons with lists of contacts to allow to ring but I need something that will allow anyone calling more than once in a row to go through like the assist app has. Any suggestions? Thanks in advance and not sure if this could go here to start a discussion in case someone is in the same boat or if it needs to go in Q&A
Yes, questions should go in Q&A. What you're looking for is Agent:
https://play.google.com/store/apps/details?id=com.tryagent&hl=en
The "Nights Keeper" app on the Play Store might do what you want. In addition to the whitelist which you said you are not really looking for, you can use "emergency call" mode and specify the number of times a contact must call before ringing through.
Sent from my D5803 using Tapatalk
I use the preinstalled Smart Connect app for quiet mode during sleeping hours, but I don't think it can be configured to let calls ring after first attempt.
amujee said:
I use the preinstalled Smart Connect app for quiet mode during sleeping hours, but I don't think it can be configured to let calls ring after first attempt.
Click to expand...
Click to collapse
One word: Tasker. ?
been very happy with agent so far.
Nights keepers is really good!
Tasker
I'd have used smart connect if it had better functionality but its too basic. So Tasker for me too.
Hi everyone,
I have done a search on the forum and have not found a thread that is similar to the issue I am having. I recently bought an asus zenwatch 2 and after hours of extensive research I think it may be a known issue, now I am posting to see if people have found a way around this or an app that can do it. Basically, I understand that Android wear watches receives notifications based on what the phone receives. If phone is on silent I wont receive any notifications either. So here are a few questions I have:
1) I have mute phone notification setting on my Asus zenwatch 2 selected on the android wear app, However, this does not apply to phone calls, if I get a phone call it will not mute the ringtone and will ring on my phone. Is there a known solution or an app that can stop this?
2) Is there a way or an app to separate the notifications setting so that the watch and phone can be controlled separately? Something similar to Pebble method of notification settings?
3) I was wondering if there is a face designer app that allows you to customize watch faces with unlimited widgets on the watch face, instead of just 3? Is there one that is compatible with wear mini launcher?
Cheers!
1. I use Tasker for this. I noticed that option didn't work for me either.
2. I don't know what you mean by this but you can set the notifications for every app in the application notifications settings menu on the phone and block apps from the android wear setting.
3. Try the Watchmaker app.
Sent from my SM-N900V using Tapatalk
jahciple said:
1. I use Tasker for this. I noticed that option didn't work for me either.
2. I don't know what you mean by this but you can set the notifications for every app in the application notifications settings menu on the phone and block apps from the android wear setting.
3. Try the Watchmaker app.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Thanks Jahciple,
Still learning about tasker, but it seems like it is a saviour for android users, I'll definitly look into it, thanks for the idea. Will I need to root?
In regards, to the second question, I meant is it possible to be able to control the notifications separately from the watch? Such as having the phone on silent and the watch still vibrates? Or say, having the watch to silent and the phone on vibrate? hopefully this makes sense.
Yep, found watchmaker and am using, definitely what I need.
Cheers!
I don't think there is way to control the notifications like what you are stating. I used Tasker to just turn off the vibrate on the phone when my watch is connected through bluetooth and then just put my watch in theater mode when I don't want to receive anything on the watch at the moment, but once you disable theater mode, you should still see the notifications. I really wished there was a way to turn off the vibrate on the watch, I just want to hear my phone, when a call is coming in and then look at the watch to see who it is.
jahciple said:
I don't think there is way to control the notifications like what you are stating. I used Tasker to just turn off the vibrate on the phone when my watch is connected through bluetooth and then just put my watch in theater mode when I don't want to receive anything on the watch at the moment, but once you disable theater mode, you should still see the notifications. I really wished there was a way to turn off the vibrate on the watch, I just want to hear my phone, when a call is coming in and then look at the watch to see who it is.
Click to expand...
Click to collapse
Hi Jahciple,
Are you able by any chance to show me what profile/action you set up to achieve this?
Cheers!
Anybody use Tasker on they're Moto X Pure? If so what version. Tasker definitely came in handy on my other phone. I just got my Moto X Pure a few days ago. My setup is almost finished. I love it.
dkeepitabuck said:
Anybody use Tasker on they're Moto X Pure? If so what version. Tasker definitely came in handy on my other phone. I just got my Moto X Pure a few days ago. My setup is almost finished. I love it.
Click to expand...
Click to collapse
Yes I use it all day long. Version 4.8u1 which is the newest in the playstore.
dkeepitabuck said:
Anybody use Tasker on they're Moto X Pure? If so what version. Tasker definitely came in handy on my other phone. I just got my Moto X Pure a few days ago. My setup is almost finished. I love it.
Click to expand...
Click to collapse
Tasker works just fine for me on the MXPE. I am on Marshmallow 6.0 with the February security update. i am using the latest version in the Play Store.
aybarrap1 said:
Tasker works just fine for me on the MXPE. I am on Marshmallow 6.0 with the February security update. i am using the latest version in the Play Store.
Click to expand...
Click to collapse
I am using tasker but it says data not available try secure settings, which I have. Also I can set a GPS toggle but when trying to use it it does nothing.
Could be an issue with secure settings app. Couldn't tell you since I have chosen not to root for now. My main reason for rooting other phones was to tame the bloat. With the exception of GPS on and off with certain apps, tasker works just fine for the functions I want so secure settings is not a must have.
What tasks do you have running? Sorry I've rooted many phones but I'm a noob to tasker.
I have a variety running such as wifi at home, rotation and custom brightness on or off based off apps, and custom alarms dependent upon calendar entries, day of the week and times. The thing with tasker is that with root and the right third party apps, the things you can do are too numerous to list. Just read up on it and come up with things you want your phone to do. Then read some more so you can set up profiles to do this things. I will admit that if you are new to tasker and do not have programming background, it seems daunting. However, once I got into it was fun and I can't up with new ideas. Once it is setup with the profiles you want, you can sit back as your phone will be automated.
aybarrap1 said:
I have a variety running such as wifi at home, rotation and custom brightness on or off based off apps, and custom alarms dependent upon calendar entries, day of the week and times. The thing with tasker is that with root and the right third party apps, the things you can do are too numerous to list. Just read up on it and come up with things you want your phone to do. Then read some more so you can set up profiles to do this things. I will admit that if you are new to tasker and do not have programming background, it seems daunting. However, once I got into it was fun and I can't up with new ideas. Once it is setup with the profiles you want, you can sit back as your phone will be automated.
Click to expand...
Click to collapse
I actually do have some programming background which is what drew me to tasker. I currently have one profile set up for home which automates my wifi on. I was hoping for GPS and data off, at said locatio, but no biggie. I'll keep playing around and create more profiles. I'm just glad it was the app not me that was the problem. One last thing is there an xposed app or some way tasker can set auto brightness? That's the one thing I miss from previous phones.
jtsativa420 said:
I actually do have some programming background which is what drew me to tasker. I currently have one profile set up for home which automates my wifi on. I was hoping for GPS and data off, at said locatio, but no biggie. I'll keep playing around and create more profiles. I'm just glad it was the app not me that was the problem. One last thing is there an xposed app or some way tasker can set auto brightness? That's the one thing I miss from previous phones.
Click to expand...
Click to collapse
Make sure that system+ in enabled in the Secure Settings app. gps off/on should work fine, but for data on/off you have to make a task that has about 2 or 3 seperate actions. I can help with that if you'd like, as i have data off/on when i connect/disconnect from wifi. what are you trying to set auto brightness on during? like a time of the day or when you use a certain app?
thefallen924 said:
Make sure that system+ in enabled in the Secure Settings app. gps off/on should work fine, but for data on/off you have to make a task that has about 2 or 3 seperate actions. I can help with that if you'd like, as i have data off/on when i connect/disconnect from wifi. what are you trying to set auto brightness on during? like a time of the day or when you use a certain app?
Click to expand...
Click to collapse
System plus is enabled and I was able to get auto brightness to work. The GPS on/off says it works yet my location light in the notification bar doesn't turn off. Yes I would love help with the data. Thanks in advance!
jtsativa420 said:
System plus is enabled and I was able to get auto brightness to work. The GPS on/off says it works yet my location light in the notification bar doesn't turn off. Yes I would love help with the data. Thanks in advance!
Click to expand...
Click to collapse
So I made a task and called it Data off. you'll want to Add>Net>Test Net. Type=Mobile Data Enabled, Store Result in=%Data. Second action will be Code>Run Shell, command=svc data disable, if=%Data~yes. Third action will b e variable>variable clear, name=%Data.
Next you'll make a task called Data On. First action is Add>Net>Test Net. Type=Mobile Data Enabled, Store Result in=%Data. Second action will be Code>Run Shell, command=svc data enable, if=%Data~No. Third action will b e variable>variable clear, name=%Data.
Now you make a new profile that becomes active with the wifi connected state. set that to trigger the Data off task, and add select data on as your exit task.
This may seem a bit of a roundabout way to do things, but i think since LL, android no longer allows any third party app or plug in to toggle the data. so the way around that is through the shell commands. Hope this helps!
Hi thefallen924, thanks for this walkthrough on mobile data, I have a noob question though, do I need root for it to work? Thanks in advance!
thefallen924 said:
So I made a task and called it Data off. you'll want to Add>Net>Test Net. Type=Mobile Data Enabled, Store Result in=%Data. Second action will be Code>Run Shell, command=svc data disable, if=%Data~yes. Third action will b e variable>variable clear, name=%Data.
Next you'll make a task called Data On. First action is Add>Net>Test Net. Type=Mobile Data Enabled, Store Result in=%Data. Second action will be Code>Run Shell, command=svc data enable, if=%Data~No. Third action will b e variable>variable clear, name=%Data.
Now you make a new profile that becomes active with the wifi connected state. set that to trigger the Data off task, and add select data on as your exit task.
This may seem a bit of a roundabout way to do things, but i think since LL, android no longer allows any third party app or plug in to toggle the data. so the way around that is through the shell commands. Hope this helps!
Click to expand...
Click to collapse
Thanks for this. I'm definitely saving the task but not enabling it just yet. Between posts I set up gavity box mm and it seems to be doing what I wanted with it's smart radio.
---------- Post added at 07:21 AM ---------- Previous post was at 07:18 AM ----------
Fumodemasiado said:
Hi thefallen924, thanks for this walkthrough on mobile data, I have a noob question though, do I need root for it to work? Thanks in advance!
Click to expand...
Click to collapse
Yes , im 90% sure you need root for this. Also, to give him thanks, click the thumbs up button below his post!
jtsativa420 said:
System plus is enabled and I was able to get auto brightness to work. The GPS on/off says it works yet my location light in the notification bar doesn't turn off. Yes I would love help with the data. Thanks in advance!
Click to expand...
Click to collapse
I had the same problem, it seems secure settings can't turn on/off the data. A found a solution using Code -> Run Shell -> Command: svc data enable (or disable) and check the Use Root option.
It works fine that way.
Dunkel06 said:
I had the same problem, it seems secure settings can't turn on/off the data. A found a solution using Code -> Run Shell -> Command: svc data enable (or disable) and check the Use Root option.
It works fine that way.
Click to expand...
Click to collapse
Very nice and simple. I just tried it, confirmed it's working and updated my tasks!! Any backdoor GPS methods?
Fit secure settings to work with data connection you do need root.
Got an AmazFit A1602 watch, Chinese ROM. Set it up, updated it, played with PACEified for a few seconds (hadn't figured out how to OTA the stock ROM yet, so it hung-up when screen went off), went back to Chinese ROM, OTA'd it, reset it in English, and that's where I left it for about a week. Worked great, loved the watch. But, coming from a Gear Live (that wore out), I can't stand not getting my notifications on the watch...
So I dug further into it. Replaced the Chinese ROM with the English ROM - now it thinks it's an A1612 PACE. Kewl. Whatever. App works, everything works, repaired the recovery and OTA works (wellp, now I'm stuck on it, after finding the bootloader is now locked). But NOTIFICATIONS still don't work!
Tried it on a different device - my Nexus 7 tablet. Still no notifications.
Tried reinstalling, tried different app versions, tried everything I can find and think of. No. Notifications.
Do they even work for anyone else?
Another thread on the saga: https://www.reddit.com/r/amazfit/comments/61w4ga/most_notifications_not_coming_through_facebook
I might just offer "ad-free" for anyone that can actually help, throw a bounty out there and see if someone can help me. I usually end up asking the hard questions nobody can answer :fingers-crossed:
Probably you've tried this already but it's worth to repeat procedure.
After you paired the watch with your phone, you have to enable notifications in the app, choose witch notifications you want to allow/block and let the amazfit app to access notifications. Last part is usually under Android settings, security. Sounds complicated but it's good to have full control.
Notifications worsk perfectly for me.
Sent from my LG-V940n using Tapatalk
Yep, that's the first thing I try - but I appreciate the reply/bump! I think I might throw that bounty out there (if legal to do so) - I'd throw $15 at this problem to get it fixed. Hopefully that's how the donate option works
I enabled notification access to Amazfit app in the Android settings. Under the "notifications" options in the app, I get a miles-long list of apps on the phone, but they are all under the option to "disallow app notifications" -- no apps appear at the top of the page under "Allow app notifications". Presumably the top section is for apps that have sent notifications.
I also "disable battery optimization" and allow contact access for the watch as well.
My phone is a Huawei Honor 5x (kiwi) running CM13 (20161223 nightly) - but also tried on the Nexus 7 (2013) tablet running stock OS, unrooted.
Each app on that list have a switch on the right to enable notifications and move it to the "Allow app notifications".
Sent from my LG-V940n using Tapatalk
Screenshots how should look like. Latest dev app does not have push notifications but has another tab. Of course, watch must be connected to the phone to be able to receive notifications. But that's obvious Btw, I didn't touch batter optimization.
Btw, Frys still has the watch on $30 off.
p.s.
Now I see that you're my neighbor
Sent from my Moto X Force
Damn, cannot edit post and add att with Tapatalk.
Sent from my Moto X Force
That was it!! Goddamn Chingrish... to me, it looked like that settings page was divided into two - apps that had sent notifications in the past, which I could turn off "allow notifications", and apps that hadn't sent notifications and I could "disallow" them from ever doing so. The Chingrish part is that they should be saying "Allowed" and "Disallowed" notifications... not "allow"/"disallow". It simply doesn't make sense to divide them solely by their switch setting... and since I had no intention of disallowing an app's notifications, I never tried switching ones from the bottom! Also doesn't make a lick of sense to disable them all by default - easily seems like it's malfunctioning. I just went through and switched everything up to "allowed" like it is in Android Wear by default.
Wellp, I got a SMS buzz on my wrist for the first time, and everything is awesome now.
Now I have a new problem...
We cannot process this transaction because there is a problem with the PayPal email address supplied by the seller. Please contact the seller to resolve the problem.
Click to expand...
Click to collapse
Well, sometimes engineers have strange logic but I'm used to it. After all, I'm engineer
I'm glad to help, not for donation
---------- Post added at 09:01 AM ---------- Previous post was at 08:48 AM ----------
Just read email from Paypal about your donation. Thx You could just buy me a coffee somewhere in San Jose. Now I can buy you if you want.
hello , i also have a problem with notification on my amazafit watch.
it only show the notification from incoming calls . nothing in rest . i try everyting ( unistall/instal app , pair/depair, factory restore ....) but nothing work . Including what is above wroten .
Any ideea ?
10x
Just sharing my experience. My notifications stopped working and I went through all the above to no avail. Finally I realised I must have accidentally turned on Silent Mode at some point. It may help to check on your watch that Silent Mode is OFF
knightsljx said:
Just sharing my experience. My notifications stopped working and I went through all the above to no avail. Finally I realised I must have accidentally turned on Silent Mode at some point. It may help to check on your watch that Silent Mode is OFF
Click to expand...
Click to collapse
Thanks my dear knightslix?
Gmail doesn't push notifications to watch
Hi all,
I m experiencing this issue and I really cannot understand what is going wrong and why it does it...i recently purchased amazfit stratos English version and I was not very satisfied with the notifications capabilities..i could only see the first email and read it all way down but if a second mail arrived I could only see the gmail logo and a number( indicating the number of the mails that I have) ..but wasn't able to read each message...very frustrating...same for other apps...Viber and line messenger if I receive more than one message I can only read the last one....so I decide to go with the watchdroid app for the phone and assistant for the watch... everything is running smoothly now,I can even reply to messages (for some reason only sms messages not Viber or line) BUT I do NOT receive my mails from gmail...something that with the amazfit app I could...well I could not read them if they were more than one but the push service was working...with watchdroid gmail push notifications do not work....any help would be appreciated guys!
Thanks in advance,
Stratos