Hi forum as the post says I'm New to this forum but still very active in the xperia play forums as well, I just got my ex's droid pro (cracked screen but still good enough for what I want to do,) since its on 2.3.4 and freshly rooted my next objectives are for a recovery and to start bringing custom roms to this forum as well so since I'm not to familiar with droid yet I may need a few places for reference for recovery if possible thank you guys and I hope to serve this forum for awhile with roms
Sent from my fingers to your forum
Recovery installed and running a cm9 build I'm hoping forgave a couple of roms in the few days for you guys
Sent from my C771 using xda app-developers app
Ok another post lol I need a favor does anybody have a Verizon stock ROM (preferably the latest 2.3.4 gingerbread) as an update.zip? I was trying to port miui over for the droid pro but apparently I had the wrong updater script and now my droid wont charge,if I plug it.in to my laptop I get nothing but a wall charger boots up the Motorola "m" or I can enter the bootloader with volume Down+power button held but it keeps saying battery low I was able to enter the recovery with r+m+power button but I need a update.zip because if i unplug from the wall charger the phone dies.
Or would either the cm7 or cm9 build renamed as a update.zip work to recover the phone so to speaks? Please help me out so I can help you guys with New roms
My apologies for this as I am still accustomed to my xperia play and the droid is New to me.
An no I did not nandroid because it never occurred to me that I should even the I have done it a million times for my xperia play lol
Thank you and again I apologize
Sent from my C771 using xda app-developers app
Help please ? I found a update .zip from the latest gb 2.3.4 said something about build prop error I put a different build prop for a VZW Droid build prop error fixed but I'm getting a error for the signature now any ideas?
Sent from my Droid Incredible to this forum
darkharbinger81 said:
Help please ? I found a update .zip from the latest gb 2.3.4 said something about build prop error I put a different build prop for a VZW Droid build prop error fixed but I'm getting a error for the signature now any ideas?
Sent from my Droid Incredible to this forum
Click to expand...
Click to collapse
Hi, i can help you. Flash the stock firmware of the verizon Droid pro. I give you RSD and the firmware links
Download RSD and drivers from this threat:http://forum.xda-developers.com/showthread.php?t=2637338
Firmware:https://sites.google.com/site/motosbf/droid-pro-sbf-files
If you need something else, just tell me
This man forgot that he has posted this.
migui0401 said:
This man forgot that he has posted this.
Click to expand...
Click to collapse
Haven't forgot, been busy with other phones I'm going to try fixing my Droid pro sometime this week, my problem with my Droid pro is it won't charge but I can access the bootloader menu but it keeps saying battery is to low so I'm trying to fix it
Sent from my ADR6300 using xda app-developers app
darkharbinger81 said:
Haven't forgot, been busy with other phones I'm going to try fixing my Droid pro sometime this week, my problem with my Droid pro is it won't charge but I can access the bootloader menu but it keeps saying battery is to low so I'm trying to fix it
Sent from my ADR6300 using xda app-developers app
Click to expand...
Click to collapse
Use an universal battery charger. I charge my phone with one of these.
---------- Post added at 02:47 PM ---------- Previous post was at 02:38 PM ----------
I'm trying to port jellybean experience to droid pro, but i don't know why, but the rom doesn't boot up, I'm made of all to do it and nothing, i guess i'll have to verify the lastest kernel, when you can begin with droid pro, if you want, I can help you. I have already built a rom for this phone, maybe it's kernel doesn't support jellybean.
migui0401 said:
Use an universal battery charger. I charge my phone with one of these.
---------- Post added at 02:47 PM ---------- Previous post was at 02:38 PM ----------
I'm trying to port jellybean experience to droid pro, but i don't know why, but the rom doesn't boot up, I'm made of all to do it and nothing, i guess i'll have to verify the lastest kernel, when you can begin with droid pro, if you want, I can help you. I have already built a rom for this phone, maybe it's kernel doesn't support jellybean.
Click to expand...
Click to collapse
I had ported jellybean for motorola xprt and got it to boot up . Tested calls and data for gsm network. But it was kinda laggy and never got around to fiixing it.
Sent from my MB612 using Tapatalk 2
rongsang said:
I had ported jellybean for motorola xprt and got it to boot up . Tested calls and data for gsm network. But it was kinda laggy and never got around to fiixing it.
Sent from my MB612 using Tapatalk 2
Click to expand...
Click to collapse
The problem i had is the rom i was trying to port had a bad framework, for the time being i have internet conection in my computer, when i get it, i'll begin my work. Good news, keep doing a good job :good:
Which rom did you port?
migui0401 said:
The problem i had is the rom i was trying to port had a bad framework, for the time being i have internet conection in my computer, when i get it, i'll begin my work. Good news, keep doing a good job :good:
Which rom did you port?
Click to expand...
Click to collapse
I ported from milestone 2
Sent from my MB612 using Tapatalk 2
rongsang said:
I ported from milestone 2
Sent from my MB612 using Tapatalk 2
Click to expand...
Click to collapse
Just a question, which guide have you followed to do a correct port? I guess I'm doing something bad. :fingers-crossed:
migui0401 said:
Just a question, which guide have you followed to do a correct port? I guess I'm doing something bad. :fingers-crossed:
Click to expand...
Click to collapse
I didn't follow any guide. I just used the milestone 2 as reference and compiled it from source. Where are you stuck on anyway?
Sent from my MB612 using Tapatalk 2
rongsang said:
I didn't follow any guide. I just used the milestone 2 as reference and compiled it from source. Where are you stuck on anyway?
Sent from my MB612 using Tapatalk 2
Click to expand...
Click to collapse
Don't missundertand me, I've build a rom for this phone, cm7 exactly. But I'm trying to port a cm 10.2 and cm 11 from milestone 2 for Droid por and just get stuck on bootanimation, i guess kernel won't connect with rom, and I've edited META-INF folder and archives and i get nothing, that's it.
migui0401 said:
Don't missundertand me, I've build a rom for this phone, cm7 exactly. But I'm trying to port a cm 10.2 and cm 11 from milestone 2 for Droid por and just get stuck on bootanimation, i guess kernel won't connect with rom, and I've edited META-INF folder and archives and i get nothing, that's it.
Click to expand...
Click to collapse
Boot with adb enabled and you can find out the problem causing the bootloop.
Sent from my MB612 using Tapatalk 2
rongsang said:
Boot with adb enabled and you can find out the problem causing the bootloop.
Sent from my MB612 using Tapatalk 2
Click to expand...
Click to collapse
In this case, adb won't detect the phone, that's why i tell you that i guess the kernel does not connect with the rom.
migui0401 said:
In this case, adb won't detect the phone, that's why i tell you that i guess the kernel does not connect with the rom.
Click to expand...
Click to collapse
Are you using the bootmenu?
Sent from my MB612 using Tapatalk 2
rongsang said:
Are you using the bootmenu?
Sent from my MB612 using Tapatalk 2
Click to expand...
Click to collapse
Yes, why?
migui0401 said:
Yes, why?
Click to expand...
Click to collapse
Go to bootmenu and boot with 2nd-init + adb.
Sent from my MB612 using Tapatalk 2
rongsang said:
Go to bootmenu and boot with 2nd-init + adb.
Sent from my MB612 using Tapatalk 2
Click to expand...
Click to collapse
Ok, i'll try
Now, adb is creating the logcat file, but i wanna know something, after find the problems of the rom these that start with E/. How do I find these problem in the rom for fixing them, i'm not very familiar with logcat,
Related
Is there anything like Fission for the Droid 2 or Droid X available that's based on 2.3.3? AngDroid has disappeared and I haven't heard anything from Team Defuse regarding updates. Makes me regret donating. I'm seeing a few new Gingerbread roms popping up for both the Droid 2 and the Droid X but they've all got Blur included. Any suggestions?
In before "be patient."
drewgaren.com
Take a look at some of his roms. You can flash one then flash the d2todx converter found on droidforums. I've been running the broodcomb rom with no issues.
tnygigles66 said:
drewgaren.com
Take a look at some of his roms. You can flash one then flash the d2todx converter found on droidforums. I've been running the broodcomb rom with no issues.
Click to expand...
Click to collapse
Are they compatible with the GB leak?
Or do I have to .sbf?
Im kinda getting bored of stock GB and wanna try something new with out having to .sbf (lazy lol)
And since there hasn't been any word from the devs here id figured some one can point me in the right direction ...
TIA
Sent from my DROID2 using XDA Premium App
if you look at the website they have three that are GB based. those three should work when flashed after the gb leak.
tnygigles66 said:
drewgaren.com
Take a look at some of his roms. You can flash one then flash the d2todx converter found on droidforums. I've been running the broodcomb rom with no issues.
Click to expand...
Click to collapse
...and you're using a Droid 2?!
Somebody should fire up a thread/guide on how to get these DX GB ROM's over to the D2
Hi there atariskid it's Break. LOL
xustfosorcim said:
...and you're using a Droid 2?!
Somebody should fire up a thread/guide on how to get these DX GB ROM's over to the D2
Hi there atariskid it's Break. LOL
Click to expand...
Click to collapse
Thats what im saying lol
Someone should ask him for permission to post up his roms here with the d2todx fix
Sent from my DROID2 using XDA Premium App
JeezyMT3G said:
Thats what im saying lol
Someone should ask him for permission to post up his roms here with the d2todx fix
Sent from my DROID2 using XDA Premium App
Click to expand...
Click to collapse
Working on it. Making sure this stuff works first...then i'll ask permission
EDIT: This PC I have has to go tonight--so i'm going to have to work on this later tonight. Time to go drop off a previously b0rked Windows box. $$ though . I'll get back on this as soon as I get home! Also, I am no dev. I'm simply trying these out and reporting my findings, to help the dev's out hopefully. I might throw a quick tutorial together even though i'm sure someone else will beat me to it
If anything, i'll ask what it would take to get this stuff working on the D2. Sort of be the guinea pig of getting his DX GB ROM's to work on the D2.
Thnx
Sent from my DROID2 using XDA Premium App
i'm on a d2 using the broodcomb rom and dxtod2 converter.
Evertyhing works great.
tnygigles66 said:
i'm on a d2 using the broodcomb rom and dxtod2 converter.
Evertyhing works great.
Click to expand...
Click to collapse
...except the charge light!
I can confirm this. VERY fast.
Droid 2 Bootstrapper makes the phone reboot. when you go to install it...unknown sources on, as well as USB debugging.
xustfosorcim said:
...except the charge light!
I can confirm this. VERY fast.
Droid 2 Bootstrapper makes the phone reboot.
Click to expand...
Click to collapse
Charge light
.....ehhh lol
If everything else work im all for it
Count me in x)
Sent from my DROID2 using XDA Premium App
JeezyMT3G said:
Charge light
.....ehhh lol
If everything else work im all for it
Count me in x)
Sent from my DROID2 using XDA Premium App
Click to expand...
Click to collapse
This is not working very well at all. The phone has rebooted on me several times. I'm having issues with the market, and Droid 2 Bootstrapper. It seems to reboot when I go to install apps...SBF'ing, then trying again. Maybe clearing data after flashing DXtoD2GB.zip, but before the first boot will help?
You should wipe everything before flashing and mount system just in case
Try that
Sent from my DROID2 using XDA Premium App
xustfosorcim said:
This is not working very well at all. The phone has rebooted on me several times. I'm having issues with the market, and Droid 2 Bootstrapper. It seems to reboot when I go to install apps...SBF'ing, then trying again. Maybe clearing data after flashing DXtoD2GB.zip, but before the first boot will help?
Click to expand...
Click to collapse
I had this issue as well when I started with broodcomb. The process below worked fine. lol, I didn't even notice the charge light.........
Originally Posted by Jboxen
Try this, (had to do this on one of squidleys roms)
Boot into clockwork
Wipe data factory reset
Install lexlight
Install porter
Boot into stock recovery before the initial boot into the rom
Wipe data factory there
Boot into rom
Let all of your apps install
Boot into clockwork
Install lexlight without wiping
Install porter again without wiping
It's a long process but it should work.
Click to expand...
Click to collapse
tnygigles66 said:
I had this issue as well when I started with broodcomb. The process below worked fine. lol, I didn't even notice the charge light.........
Click to expand...
Click to collapse
So you're running lexlite on the D2? how's it working for you? lol
I just finished SBF'ing the 6th time this week.
xustfosorcim said:
So you're running lexlite on the D2? how's it working for you? lol
I just finished SBF'ing the 6th time this week.
Click to expand...
Click to collapse
I'm running brrodcomb on a D2. It works great. The only two things I've notice are apparently the charge light and you cant add shortcuts to the home screen by long pressing on them in the app drawer. you have to go though the home screen.
lol sbf'ing is so second nature at this point for me
So nobody has tried drewgaren's other ROM's for the DX?
...and those were the instructions you used to get everything working properly? I couldn't install ANY app without the phone rebooting on me.
xustfosorcim said:
So nobody has tried drewgaren's other ROM's for the DX?
...and those were the instructions you used to get everything working properly? I couldn't install ANY app without the phone rebooting on me.
Click to expand...
Click to collapse
I've tried all three and the above method stopped the reboots. I liked the stock launcher and stock look of GB so I stuck with broodcomb.
So can we get a step by step on how to do it with the files also? I can d/l the rom from his site
Sent from my DROID2 using XDA Premium App
JeezyMT3G said:
So can we get a step by step on how to do it with the files also? I can d/l the rom from his site
Sent from my DROID2 using XDA Premium App
Click to expand...
Click to collapse
I might work on this later tonight, after I get my phone working. I'm trying to get LexLite4.2 on my D2. Hang on...lol
This rom compiled from CyanogenMod7 vanilla source, android 2.3.7 — for Milestone XT720.
Link:
16.09.2012
Archive
Peshovec test branch releases:
20120123 build
Installing instructions:
Install milestone default 2.1 rom(Russian, CBW, Singapore, whatever);
Root it with androot or superoneclickroot.
Install last openrecovery build from Mioze7Ae.
Download update, put it to /sdcard/openrecovery/updates and update it in openrecovery.
One man making and one man standing.. it's good... yes.
But when team working together - that much better.
For that we make "organization" in github, where everyone can commit his patch to source.
So, everyone may join to our "organization" =)
https://github.com/CyanogenModXT720
Credits:
CyanogenMod Developers,
Quarx,Xvilka,Dexter, Mioze7Ae, Stifley, nadlabak, dateno1, j.y.daddy, easye420, mchlbenner, mediaon, peshovec, Skrilax_CZ, khalpowers, wanted, hellmonger, stlifey, Epsylon3
People, there to many of you. Just THANK YOU for everyone who help me and who make this rom possible.
Oka
Downloading will let you know.
Sent from my XT720 using XDA Premium App
Download link doesn't work
Sent from my XT720 using XDA Premium App
mchlbenner said:
Download link doesn't work
Sent from my XT720 using XDA Premium App
Click to expand...
Click to collapse
Try this...
http://xt720.ru/Files/Mods/cm7/update-cm-7.1.0-MilestoneXT720-alpha-10122011-signed.zip
Thanks fot the link it wprked.
Sent from my XT720 using XDA Premium App
fjfalcon said:
This rom compiled from CyanogenMod7 vanilla source, android 2.3.7 — for Milestone XT720.
It's ALPHA version of something, that someday will become perfect rom for our phone.
If i say alpha — i mean: if something work — very well. If something don't — just say it to me, in mine plan to make everything work.
BTW, it even can just don't get booted... Yes, it also possible.
Moscow wasn't constructed in one day, so be patient.
Link:
12.10.2011 build 21:26(gmt+4)
As far i can say what works:
touchscreen,
audio,
gsm phone.
Nothing else i haven't tested yet.
Installing instructions:
Install milestone default 2.1 rom(Russian, CBW, Singapore, whatever);
Root it with androot or superoneclickroot.
Install last openrecovery build from Mioze7Ae.
Download update, put it to /sdcard/openrecovery/updates and update it in openrecovery.
Credits:
CyanogenMod Developers,
Quarx,Xvilka,Dexter, Mioze7Ae, Stifley, nadlabak, dateno1, j.y.daddy, easye420, mchlbenner, mediaon, peshovek, Skrilax_CZ, khalpowers, wanted, hellmonger, hill rsm, 13racer...
People, there to many of you. Just THANK YOU for everyone who help me and who make this rom possible.
Click to expand...
Click to collapse
You mean that you want to do a ROM with all work include radio FM ?
Thanks a bunch fjfalcon! But I couldn't get it to boot, stuck at logo so far, gonna try again...
***3rd time pulling battery and still can't get it to boot, and can't press volume up to get back to openrecovery so I guess I have to rsd sbf again...
***Do I need Mz's bootfix?
No tryed it did not work.
Could not get Russian sbf to flash trying UK see if it will boot.
Confuse if it will not boot why post a.link
Sent from my Milestone XT720 using XDA Premium App
LibertyMonger said:
Thanks a bunch fjfalcon! But I couldn't get it to boot, stuck at logo so far, gonna try again...
***3rd time pulling battery and still can't get it to boot, and can't press volume up to get back to openrecovery so I guess I have to rsd sbf again...
***Do I need Mz's bootfix?
Click to expand...
Click to collapse
I had to RSD it It's not clear from the OP, but I think he said he can't get it to boot right now.
Just a reminder that ORXT720 has a reinstall utility. If you use that after installing an untested ROM you're very likely to be able to keep OpenRecovery working.
Sent from my Milestone XT720 using xda premium
Is there any fundamental difference between this one vs. JY's CM7 with Mioze's patch?
Mioze7Ae said:
Just a reminder that ORXT720 has a reinstall utility. If you use that after installing an untested ROM you're very likely to be able to keep OpenRecovery working.
Sent from my Milestone XT720 using xda premium
Click to expand...
Click to collapse
Good advice Mz never thought of using it for that, I guess that was the intention for use lol. Yeah it won't boot as of now but I'm sure fjfalcon is working hard, like he said Moscow wasn't built in a day and surely our XT's are always under construction! lol.
The big difference would be interal storage right know 125 with our own it would be 250 mb.
I would like to have that space for apps.
Sent from my XT720 using XDA Premium App
If anybody has a Russian 2.1 sbf please post a link.
Thanks.
Sent from my XT720 using XDA Premium App
mchlbenner said:
If anybody has a Russian 2.1 sbf please post a link.
Thanks.
Sent from my XT720 using XDA Premium App
Click to expand...
Click to collapse
Theres one linked in the SBF thread.
http://forum.xda-developers.com/showpost.php?p=11846529
The Russian sbf is no good already tired it thanks for the try.
Sent from my XT720 using XDA Premium App
YAY!!!! SOmething to do tonight <3
As i said it's not stable.
In next version i think we get it working.
Next build will be making today.. in some hours.
Btw, i have added one file to last build.
It may boot now..
New version.. will check it by myself soon.
Damn! found why it not get booted.
Sorry everyone.
New build:
FM Radio should work.
Touchscreen should work.
Should boot.
Good luck! =)
http://xt720.ru/Files/Mods/cm7/update-cm-7.1.0-MilestoneXT720-alpha-10132011-signed.zip
fjfalcon said:
New build:
FM Radio should work.
Touchscreen should work.
Should boot.
Good luck! =)
http://xt720.ru/Files/Mods/cm7/update-cm-7.1.0-MilestoneXT720-alpha-10132011-signed.zip
Click to expand...
Click to collapse
You are fantastic, this ROM will be amazing when all will be working.
EDIT: Do you think that media gallery botton will work ?
This is my first rom. I don't know if it's working, because i had to send my phone back. I need someone who can test ist.
Details
It's based on the Aurora ICS for the X5 and on the MIUI from ajhavery for the Desire Z. It's ported with the method of proxuser.
Bugs
It contains all bugs of Aurora ICS
Info
Q: Will it be supported?
A: At first i need to know if it's working. Then i will need a little bit of help, because i'am only 15 years old and have not enough time.
Q: Will there be updates?
A: Yes, when it's working i will release every time updates when the other devs update their roms.
It's my first rom so don't be hard to me if anything isn't working well.
Credits
Thanks to dzo for the Aurora rom
Thanks to ajhavery for the MIUI rom
Thanks to proxuser for his guide
Install:
I think you must do a full wipe.
Put the zip you have signed to your sdcard
Do a full wipe
Install the rom
Download
Mediafire
NOTE:
PLEASE READ THIS! THE ROM IS NOT SIGNED! SIGN IT BEFORE YOU USE IT!
It would be nice if anyone would be able to sign the releases, because none of the apps can sign it and i have not a linux PC.
I am not sure but I think it would be way better to try porting Desire Z ROMs because it has same chipset while U8150 has nothing simliar to U8800 except the brand
Well, its a beginning, thanks
You can use zipsigner 2, its on the market and its free... Later ill try your room! Many many thanks!
Sent from my Huawei Ideos X5 using xda premium
when it's not working, i can try to port from G2 but there are no MIUI v4 roms
zipsigner is not working
I think is better to port from desire z... Miui Australia have a ROM from this phone
Sent from my Huawei Ideos X5 using xda premium
where is it? i can't find it.
i will post a new one tomorrow
I think is better to port from desire z... Miui china a have a ROM from this phone
thank you
would have been interested if u got it working !
Sent from my U8800 using xda premium
I saw one in the g2 forum so i will upload it in the evening. I don't have much time, because i am 15 and in a grammar school (highest school before you can study)
Sent from my cm_tenderloin using xda premium
here is it http://dl.dropbox.com/u/27779854/AuroraMIUI.zip
it's not signed, because i haven't a linux pc and the apps aren't working
So did anybody tried that yet? What should we do? A little more information would be helpful (like from which version of aurora is this, wipe data first?). Please update first post with more information and updated links.
But very glad to see this topic. Thanks man.
i've updated the first post
For me don't work
Do you have signed it?
Sent from my cm_tenderloin using xda premium
Maybe you should install wubi? That way you can have windows and ubuntu. I get error 7 or 6 (cant remember) and it says: bad install.
Also, cant cwm install unsigned zips?
Sent from my Derp using XDA Herp
Good job! Thank you very much.
baiwangsheng said:
Good job! Thank you very much.
Click to expand...
Click to collapse
So you got it working? Will you upload the zip file you have?
I don't signed it, only zip and install. Sorry for my language
tomeczekf said:
I don't signed it, only zip and install. Sorry for my language
Click to expand...
Click to collapse
I can understand you well enought
I cant download:
Error (509)
This account's public links are generating too much traffic and have been temporarily disabled!
Upload it to mediafire if you can.
Alrighty, lets respect stepehenspear's request and keep all questions in this thread. If you have a bug with logcat or paste bin, then post in the dev thread.
neh4pres said:
Had anyone who originally had wifi issues with aokp flashed this build?
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
Sent from my SCH-I500 using xda premium
Sent from my SCH-I500 using xda premium
with having to update to glitch 14b5 for 6.1 on this, is is safe to flash updated glitch kernel in same cwm session as v26, or should i let v26 boot fully before flashing glitch?
AOKP ver 25 - RickS :: Stock CM9 Kernel :: EH03 Radio
mrjake1970 said:
with having to update to glitch 14b5 for 6.1 on this, is is safe to flash updated glitch kernel in same cwm session as v26, or should i let v26 boot fully before flashing glitch?
AOKP ver 25 - RickS :: Stock CM9 Kernel :: EH03 Radio
Click to expand...
Click to collapse
Let it boot with stock kernel then reboot recovery and flash glitch 14 b5 for 6.1
@ neh4pres my wifi was borked with steve's other builds but it works just fine with this one
Sent from my SCH-I500 using XDA App
I suspect only 40% of fascinate users who use this to post here.
tonu42 said:
I suspect only 40% of fascinate users who use this to post here.
Click to expand...
Click to collapse
thats 40% less bull**** to clutter the dev thread...I would classify that as a improvement
My wifi is still borked with b26 wasn't with rick s ver of b25
Sent from my SCH-I500 using xda premium
xain713 said:
My wifi is still borked with b26 wasn't with rick s ver of b25
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
Is it the same on/off freaking out wifi?
Sent from my SCH-I500 using xda premium
At first yea but after flashing glitch b5 it stopped was on b4 not sure if that did it or the reboot xD
Sent from my SCH-I500 using xda premium
Went back to stock including repartitioning and couldn't get TMS 6.5 to install but 2 installed fine. I have AOKP running now. So far so good, but the red box when I click things is pretty annoying. Nice work!
Can I restore some of my non system apps using the backup I made with Titanium backup from 2.3?
Auto flash and auto brightness functionality?
Contact pictures
When someone calls you..on the answer screen the contact pic shows up on the upper half of the screen, cutting off and severely distorting the image. \
Anyone else have this issue..or know how to fix it? Are there any answer screen options...i noticed the lock-screen style options don't work...
Also, I am using Go Lanucher...but every time I go into an app, then go back to the home screen, either via home button or back button, the launcher has to re-load it self, as it doesn't seem to be staying persistent in memory. I remember an option in CM7 to keep the launcher locked in memory...but can't seem to find it here in ICS..Setting the persistent option in Go Launchers settings has no effect.
BLN?
BLN doesn't seem to be working...
Also, the ringtone only plays once when somone calls...and doesn't replay...it also takes a few seconds for the caller id (contact info and picture to show)...\
Not sure if this is rom or kernel related.
after i install THS build 2, i go back in to CWM and the text at the bottom states that it cant mount /cache/
so when i factory reset it skips a lot of the locations.
is this normal?
---------- Post added at 03:48 AM ---------- Previous post was at 03:22 AM ----------
nvm. holding the power and volume button got me into cwm4 while going into recovery from os got me into cwm5. -_-
tonybalonyy said:
after i install THS build 2, i go back in to CWM and the text at the bottom states that it cant mount /cache/
so when i factory reset it skips a lot of the locations.
is this normal?
---------- Post added at 03:48 AM ---------- Previous post was at 03:22 AM ----------
nvm. holding the power and volume button got me into cwm4 while going into recovery from os got me into cwm5. -_-
Click to expand...
Click to collapse
You must not have done enough reading.. Never 3 finger recovery on ics roms
Sent from my SCH-I500 using xda premium
neh4pres said:
You must not have done enough reading.. Never 3 finger recovery on ics roms
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
Seems to be the norm lately dont it? A perfect example is all of the folks flashing icy glitch for build 6.0 for a build 6.5 rom lol. It amazes me that were on a forum that requires reading to comprehend but many fail to actually read lmao.
droidstyle said:
Seems to be the norm lately dont it? A perfect example is all of the folks flashing icy glitch for build 6.0 for a build 6.5 rom lol. It amazes me that were on a forum that requires reading to comprehend but many fail to actually read lmao.
Click to expand...
Click to collapse
^^ what he said
Sent from my SCH-I500 using xda premium
neh4pres said:
^^ what he said
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
^^^ What they both said.
Sent from my glitched aokp unicorn.
is GPS broke for everyone or just me...and I can't seem to get the GPS aids to work either
Edit...I can't seem to change to swype either
Sent from my icy gliched fassy
Nicklag said:
is GPS broke for everyone or just me...and I can't seem to get the GPS aids to work either
Edit...I can't seem to change to swype either
Sent from my icy gliched fassy
Click to expand...
Click to collapse
Just tried it. Indoors. In a place with a crapton of interference. Instant lock up to 9 satellites. I've never seen gps work that well on my phone before.
http://www.xda-developers.com/android/beats-audio-now-available-on-any-gingerbread-rom/
I flashed the zip in CM7 and it definitely made a difference in sound quality.
Edit: PM me if you want the file.
That is sweet! Can't wait for an ICS version.
Do you think it will work on stock Rom since its bbased on gingerbread?
Sent from my Kindle Fire using Tapatalk
will25u said:
Do you think it will work on stock Rom since its bbased on gingerbread?
Sent from my Kindle Fire using Tapatalk
Click to expand...
Click to collapse
Just make a backup and try it, if something isn't right afterward just restore your backup.
Thanks for the link, I flashed it and do notice some improvement
Tried to flash this on my stock 6.2.2 KF and was unsuccessful. Is it only compatible with cooked gingerbread ROMs? Thx for your help in advance.
sent from my CommandCenter using xda premium
can't access to link
Can anyone provide me a link to that thread or update.zip file
can't access it says
Invalid thread specified. If you followed a valid link, please notify the administrator
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1523760
kundancool said:
Can anyone provide me a link to that thread or update.zip file
can't access it says
http://forum.xda-developers.com/showthread.php?t=1523760
Click to expand...
Click to collapse
All threads have been closed and links removed due to people disputing the MOD's function. So basically a lot of people *****ing.
Sent from my Kindle Fire using xda premium
If anyone wants the file PM me and I will send you a link to download it.
Jessical said:
That is sweet! Can't wait for an ICS version.
Click to expand...
Click to collapse
I flash this into my ICS and it works. But really it is so hard to find the difference. If you want, you can give it a shot
http://forum.xda-developers.com/showthread.php?t=1525226
Update: I used the download link from 3/2/2012
Sounds interesting. I always thought it was a marketing gimmick. Did it work on ICS too?
Not sure how people are making this work for KF. Tried several times through twrp and it didn't install. Did the manual push, which lead to my device getting bricked. I think I'm gonna stay away for now till the kinks get ironed out unless anyone with a KF can help me successfully install.
Sent from my Kindle Fire using xda premium
installs fine on my cm7
which cm7 are you using?
Sent from my HTC Glacier using xda premium
xolanir said:
Not sure how people are making this work for KF. Tried several times through twrp and it didn't install. Did the manual push, which lead to my device getting bricked. I think I'm gonna stay away for now till the kinks get ironed out unless anyone with a KF can help me successfully install.
Sent from my Kindle Fire using xda premium
Click to expand...
Click to collapse
What error did you get through TWRP?
BluesHawk said:
What error did you get through TWRP?
Click to expand...
Click to collapse
It tries to mount/open the file but then says it can't read it. Plus I'm on stock KF firmware, would that make a difference?
sent from my CommandCenter using xda premium
xolanir said:
It tries to mount/open the file but then says it can't read it. Plus I'm on stock KF firmware, would that make a difference?
sent from my CommandCenter using xda premium
Click to expand...
Click to collapse
Yes. I believe the thread said it was for Gingerbread only, but some ICS folks had luck. I do not think there was any talk of the stock KF firmware, nor was it designed to install correctly on that firmware.
On a side note, it does not really install correctly on anything, must people just thought they heard a difference unless they went through the manual installation process.
JustROLLIN said:
Yes. I believe the thread said it was for Gingerbread only, but some ICS folks had luck. I do not think there was any talk of the stock KF firmware, nor was it designed to install correctly on that firmware.
On a side note, it does not really install correctly on anything, must people just thought they heard a difference unless they went through the manual installation process.
Click to expand...
Click to collapse
Yeah when I read the original thread, it just listed GB ROMs as compatible and so it installed fine on my infuse 4G. Since I already was running voodoo sound on my infuse, couldn't be sure on whether the sound is really all the way different, but some songs and their bass sound a little clearer than before.
Sent from my Kindle Fire using xda premium