So I've been running a rooted Note 3 for a while. When the Note 3 Kitkat update came out, I updated it via Odin as OTA update was not available since I was rooted.
All the posts I read had mentioned that updating to 4.4.2 from 4.3 would erase all my data but after updating via odin all my data was in place. I had only lost root which I rooted again though CF Auto Root.
The problem now is that when I try to install CWM (via Odin) or TWRP (via Goo or Odin), it goes through the installation but then the phone goes into a boot loop of sorts..It's NOT the normal boot loop which gets stuck on the Samsung logo.
What happens is that the phone vibrates twice (with a 1 sec interval in between), then the Samsung Note 3 N-9005 screen appears with "Booting Recovery..." on the top left and within a sec it goes blank and then back to 2 vibrates and the screen come on to show Samsung Note 3 N-9005.
The only way I found to fix this was a battery pull and then turning on the device holding the power, home and down vol key to boot into recovery and then flashing CF Auto Root again.
I don't know why am I not able to install any of these recoveries. I've made sure I try to install the latest versions of them which are Kitkat compatible.
Anyone else with this problem or a solution?
Can a Cache and data wipe fix this? But the problem again being I won't be able to backup my ROM since i can't get these recoveries to install!
There is a script in official firmware that checks for official recovery and if it finds a custom one it tries to overwrite with official one. If i remember correct it's called install-recovery. sh
PhilZ recovery handles it automatically.
It's impossibe to flash anything other than the leaked 4.4.2 stock because you flashed your bootloader to kitkat, no you MUST stay on sammy 4.4.2 till the devs found a solution for this. Thats why you have to read carefully be4 you flash.
silentvisitor said:
There is a script in official firmware that checks for official recovery and if it finds a custom one it tries to overwrite with official one. If i remember correct it's called install-recovery. sh
PhilZ recovery handles it automatically.
Click to expand...
Click to collapse
No luck!
I tried PhilZ recovery from the below link.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/hltexx
What are my other options?
sid8907 said:
No luck!
I tried PhilZ recovery from the below link.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/hltexx
What are my other options?
Click to expand...
Click to collapse
This one seems to be the only one working with 4.4.2 right now.
Possible solution
The way I can suggest is to create a little update.zip file with little updater-script to remove install-recovery.sh file from device (just one line needed).
Ok, I found a zip which I am attaching below. You(or anyone) may review the script before flashing.
Place this on your external (or internal) sdcard.
In ODIN don't check Auto reboot
Flash Recovery. Remove phone when it says PASS.
Remove battery. Start in Recovery mode by pressing buttons.
You should now be in new Recovery.
Flash that zip file.
Reboot.
You should be good.
The Auto Reboot for some reason is faded out. Tried different versions of Odin and also tried to open it with the phone connected/disconnected.
I am out of ideas.
I would suggest you to wait for someone to come up with working solution. Being too adventurous with ODIN could brick your device.
sid8907 said:
The Auto Reboot for some reason is faded out. Tried different versions of Odin and also tried to open it with the phone connected/disconnected.
Click to expand...
Click to collapse
Clear out all your ODIN caches etc, delete all files and keep 1.85.
Flash this (only working recovery on 4.4.2) via PDA in ODIN, If it doesn't reboot auto after saying PASS or RESET.. just turn phone off, reboot into recovery and it'll be fine.
EDIT: Just re-read, Re flash your Stock 4.4.2 (Use XEO not the leaked one!) and then start again
Thanks!
Maybe a little off topic, but is there a way to install CM11 on Stock 4.4.2 on the Note 3?
I've been reading Samsung is out with a new bootloader so there is no way round this?
radicalisto said:
Clear out all your ODIN caches etc, delete all files and keep 1.85.
Flash this (only working recovery on 4.4.2) via PDA in ODIN, If it doesn't reboot auto after saying PASS or RESET.. just turn phone off, reboot into recovery and it'll be fine.
EDIT: Just re-read, Re flash your Stock 4.4.2 (Use XEO not the leaked one!) and then start again
Click to expand...
Click to collapse
Thanks!!
sid8907 said:
Thanks!
Maybe a little off topic, but is there a way to install CM11 on Stock 4.4.2 on the Note 3?
I've been reading Samsung is out with a new bootloader so there is no way round this?
Click to expand...
Click to collapse
You may have to do a little reading but I believe CM11 is now working on the KK bootloader...
sid8907 said:
So I've been running a rooted Note 3 for a while. When the Note 3 Kitkat update came out, I updated it via Odin as OTA update was not available since I was rooted.
All the posts I read had mentioned that updating to 4.4.2 from 4.3 would erase all my data but after updating via odin all my data was in place. I had only lost root which I rooted again though CF Auto Root.
The problem now is that when I try to install CWM (via Odin) or TWRP (via Goo or Odin), it goes through the installation but then the phone goes into a boot loop of sorts..It's NOT the normal boot loop which gets stuck on the Samsung logo.
What happens is that the phone vibrates twice (with a 1 sec interval in between), then the Samsung Note 3 N-9005 screen appears with "Booting Recovery..." on the top left and within a sec it goes blank and then back to 2 vibrates and the screen come on to show Samsung Note 3 N-9005.
The only way I found to fix this was a battery pull and then turning on the device holding the power, home and down vol key to boot into recovery and then flashing CF Auto Root again.
I don't know why am I not able to install any of these recoveries. I've made sure I try to install the latest versions of them which are Kitkat compatible.
Anyone else with this problem or a solution?
Can a Cache and data wipe fix this? But the problem again being I won't be able to backup my ROM since i can't get these recoveries to install!
Click to expand...
Click to collapse
here's the link for twrp for ya'll http://forum.xda-developers.com/showpost.php?p=50333147&postcount=398
sid8907 said:
So I've been running a rooted Note 3 for a while. When the Note 3 Kitkat update came out, I updated it via Odin as OTA update was not available since I was rooted.
All the posts I read had mentioned that updating to 4.4.2 from 4.3 would erase all my data but after updating via odin all my data was in place. I had only lost root which I rooted again though CF Auto Root.
The problem now is that when I try to install CWM (via Odin) or TWRP (via Goo or Odin), it goes through the installation but then the phone goes into a boot loop of sorts..It's NOT the normal boot loop which gets stuck on the Samsung logo.
What happens is that the phone vibrates twice (with a 1 sec interval in between), then the Samsung Note 3 N-9005 screen appears with "Booting Recovery..." on the top left and within a sec it goes blank and then back to 2 vibrates and the screen come on to show Samsung Note 3 N-9005.
The only way I found to fix this was a battery pull and then turning on the device holding the power, home and down vol key to boot into recovery and then flashing CF Auto Root again.
I don't know why am I not able to install any of these recoveries. I've made sure I try to install the latest versions of them which are Kitkat compatible.
Anyone else with this problem or a solution?
Can a Cache and data wipe fix this? But the problem again being I won't be able to backup my ROM since i can't get these recoveries to install!
Click to expand...
Click to collapse
jp.26 said:
here's the link for twrp for ya'll http://forum.xda-developers.com/showpost.php?p=50333147&postcount=398
Click to expand...
Click to collapse
so.... yeah i just updated my bootloader to 4.4.2 and this drove me literally insane. ive been working on it for 4 hours now. i encountered so many problems with installing the bootloader. exact same problem as SID8907. i gotta tell you tho.... you worked some magic my friend. i tried almost everything. then i came across your link. i was like why not? so i flashed the img in odin..... anddddd :drumroll pleaseeeeee:: IT WORKED. ahhh....... so much frustration and the problem is solved!!! thank you so much JP.26 :good::laugh:
is there any word on how to fix this been looking for hours tmobile note beast dont want to put any roots down on my phone before i find a way to flash cm or a non bloated note rom would be nice.
I'll that I've managed is to root and flash twrp I found a way to turn cwm recovery into a tar file and flash through odin. But i just get into a boot loop with cwm due to the boot loader I presume but tarp works fine I just can't flash cm11. I get boot loop every time
Sent from my SM-N900T using XDA Premium 4 mobile app
im sorry but im confused here... does this all simply mean that there is not yet a working cwm for 4.4.2 yet? and that while we can root, there is no working recovery for this version?
I'm not sure myself tarp works but I can't flash cm11
Sent from my SM-N900T using Tapatalk
Phillz cwm Dev edition I think that's the name works its a themed touch cwm. This works great but still can't flash cm so gayyyy
Sent from my SM-N900T using Tapatalk
I was wondering what happened to the cmw too.
The modded cmw by Chenglu is the only one working that I know of.
Link to thread: http://forum.xda-developers.com/showthread.php?t=2454079
Related
all.
I have an i9505 on 3 UK that has been rooted for over 6 months. I've been running the excellent TW based Echo Rom but wanted to try an ASOP rom but quickly wanted to revert.
I tried to restore my Nandroid but this failed and screwed up the phone (dont ask)so back to ODIN and i flashed back to stock 4.4.2 firmware for the UK via Sammobile (NG8)
Now back to square 1 so attempted to reroot with CF Autoroot again via ODIN. all show pass and i get the black screen on the phone with the red android logo and line stating stock recovery restored. I then used ODIN to flash Philz recovery again shown as Pass, however when i try to get into recovery i get some small white text on the bkack background that is there too briefly to read before the phone reboots as normal.
The Su superuser app is there but states the Su binary is outdated and the phone has no root access.
Ive read a few methods to get round this but they all seem to follow the same process ive tried a few times now.
The Rom for Echoe is auto root so id have thought if i could get to recovery somehow i could just flash this ?
Any one any views or have i screwed up for good ? .
You will be fine.
If you want to flash a custom rom anyway the shortest way would be to just flash the custom recovery. You don't need root for that.
Uncheck auto-reboot before you flash the recovery and it should work.
Lennyz1988 said:
You will be fine.
If you want to flash a custom rom anyway the shortest way would be to just flash the custom recovery. You don't need root for that.
Uncheck auto-reboot before you flash the recovery and it should work.
Click to expand...
Click to collapse
so i reflashed Philz recovery and unchecked auto reboot. This then gives me PASS in ODIN. I guess then i unplug and try and activate recovery - but still nothing...it just boots up normally ?
robinta said:
so i reflashed Philz recovery and unchecked auto reboot. This then gives me PASS in ODIN. I guess then i unplug and try and activate recovery - but still nothing...it just boots up normally ?
Click to expand...
Click to collapse
What is the model descriped when you are in download mode?
What is the exact version of Philz you are trying to flash?
Lennyz1988 said:
What is the model descriped when you are in download mode?
What is the exact version of Philz you are trying to flash?
Click to expand...
Click to collapse
GTI9505...(Bootloader i9505xxegng8)
Originally I tried philz_touch_5.15.8-i9505.tar.md5
and then updated to philz_touch_6.23.9-i9505.tar.md5 with no avail.
Try redownloading it. If you say that if passes, then it should just work.
If it still fails then try TWRP. Uncheck auto-reboot before flashing.
Could it be connected to me flashing a generic unlocked UK firmware on a 3 UK handset ?
That's sorted it ! Flashed CWM recovery and am now running Echoes v28.
Thanks for the help. I was really panicking for a while.
I wont be changing roms for a while but I guess if I did I won't lose root ?
I need help. lol. my Samsung note 3 is stuck in bootloop. I posted this in the thread for the hyperdrive rom because its what I was trying to flash.
i wiped and flashed in the stock slot. and now im stuck in the bootloop problem. it says recovery booting in the upper left of the screen and just keeps rebooting. I tried going in to odin and reloading the "n900v kk firmware" and nothing. anyone know a fix for this. is there something I can download to flash to fix this. I know I will have to use odin, just not sure what.
donelam304 said:
I need help. lol. my Samsung note 3 is stuck in bootloop. I posted this in the thread for the hyperdrive rom because its what I was trying to flash.
i wiped and flashed in the stock slot. and now im stuck in the bootloop problem. it says recovery booting in the upper left of the screen and just keeps rebooting. I tried going in to odin and reloading the "n900v kk firmware" and nothing. anyone know a fix for this. is there something I can download to flash to fix this. I know I will have to use odin, just not sure what.
Click to expand...
Click to collapse
Hi I'm kinda new to the community and Android, but I'll try to help. I've been having issues trying to use safestrap to install my custom roms. I know that 3.72 had issues with the extra slots. That was supposed to be fixed in 3.75. In short I haven't reached a loop but have had to flash to stock several times with Odin. I had to remove my battery to get the phone in "power off" mode. From there, I booted to download for odin (assuming you can get it to boot to download-volume down/home/power buttons to get there).
Once I got there, I just made sure I had the firmware version I wanted to go back to, plugged it into odin and bam! Back to stock to start over.
Bryotch said:
Hi I'm kinda new to the community and Android, but I'll try to help. I've been having issues trying to use safestrap to install my custom roms. I know that 3.72 had issues with the extra slots. That was supposed to be fixed in 3.75. In short I haven't reached a loop but have had to flash to stock several times with Odin. I had to remove my battery to get the phone in "power off" mode. From there, I booted to download for odin (assuming you can get it to boot to download-volume down/home/power buttons to get there).
Once I got there, I just made sure I had the firmware version I wanted to go back to, plugged it into odin and bam! Back to stock to start over.
Click to expand...
Click to collapse
I can boot in to the download mode. has no problem. even tried flashing the n900v_kk_firmware.tar.md5 tar,
ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5
and even tried the N900VVRUCNC4_N900VVZWCNC4_N900VVRUCNC4_HOME.tar.md5
and when I do the MJE one it says invalid. am I flashing the wrong file is there something else I should be using. when I get in to manual mode after it boots in to manual recovery mode it says im on NC4. it says in the upper left corner the following:
Android stem recovery <3e>
KOT49H.N900VVRUCNC
volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
is there a way to flash safestrap or CWM in odin.
donelam304 said:
I can boot in to the download mode. has no problem. even tried flashing the n900v_kk_firmware.tar.md5 tar,
ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5
and even tried the N900VVRUCNC4_N900VVZWCNC4_N900VVRUCNC4_HOME.tar.md5
and when I do the MJE one it says invalid. am I flashing the wrong file is there something else I should be using. when I get in to manual mode after it boots in to manual recovery mode it says im on NC4. it says in the upper left corner the following:
Android stem recovery <3e>
KOT49H.N900VVRUCNC
volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
is there a way to flash safestrap or CWM in odin.
Click to expand...
Click to collapse
You're running the same build I have, been having similar issues. I used Odin no completely repartition and wipe the phone. I used N900VVRUCNC4_N900VVZWCNC4_N900VVRUCNC4_HOME.tar.md5 and the HLTE.pit file (for this build). In Odin You put the pit and md5 files in (.pit file in the PIT slot and md5 in the AP slot on Odin 3.09) This took me back to the KK NC4 build, granted, I lost alot of data but I didn't use a Nandroid backup either. This got me back to a functional device but i'm still having issues getting ANY custom roms to work. I did flash to NC2 kernel since then and still no luck. Let me know if that helps. I can get the files I used if you can't find them, but most everything came from xda.
PS. you can find some firmwares with recovery and other things added. I avoided these just to make sure I could get back to stock. I use Towelroot, BusyBox, SuperSU, and Safestrap 3.75 b04
Bryotch said:
You're running the same build I have, been having similar issues. I used Odin no completely repartition and wipe the phone. I used N900VVRUCNC4_N900VVZWCNC4_N900VVRUCNC4_HOME.tar.md5 and the HLTE.pit file (for this build). In Odin You put the pit and md5 files in (.pit file in the PIT slot and md5 in the AP slot on Odin 3.09) This took me back to the KK NC4 build, granted, I lost alot of data but I didn't use a Nandroid backup either. This got me back to a functional device but i'm still having issues getting ANY custom roms to work. I did flash to NC2 kernel since then and still no luck. Let me know if that helps. I can get the files I used if you can't find them, but most everything came from xda.
PS. you can find some firmwares with recovery and other things added. I avoided these just to make sure I could get back to stock. I use Towelroot, BusyBox, SuperSU, and Safestrap 3.75 b04
Click to expand...
Click to collapse
i done a search on the stock firmware you mentioned and after about 2 dozen websites and and trying about 15 flashes I finally got it to work. this has been one heck of a day. I finally got it to work. I am in the process of trying to get safestrap and stuff on it now. I already used towelroot to rot it. what version of safestrap do you recommend. I was told 3.72 was for KK. and 3.75 was for the Samsung galaxy S5.
donelam304 said:
i done a search on the stock firmware you mentioned and after about 2 dozen websites and and trying about 15 flashes I finally got it to work. this has been one heck of a day. I finally got it to work. I am in the process of trying to get safestrap and stuff on it now. I already used towelroot to rot it. what version of safestrap do you recommend. I was told 3.72 was for KK. and 3.75 was for the Samsung galaxy S5.
Click to expand...
Click to collapse
here is the link I found with all the carriers for the note 3
http://galaxynote3root.com/galaxy-note-3-repair/how-to-unroot-galaxy-note-3/
donelam304 said:
here is the link I found with all the carriers for the note 3
http://galaxynote3root.com/galaxy-note-3-repair/how-to-unroot-galaxy-note-3/
Click to expand...
Click to collapse
thanks so much by the way. I greatly appreciate the assistance.
Rooted the device with Odin. But couldn't for the life of me find a recovery for it. Flash a ton through Odin then final got a TWRP recovery to work.. When I wiped everything I was instructed to I tried to flash the rom I found (Bliss) I got a could not mount preload error.. And another error I can't recall. Then it just kept looping. So I ran the root file through Odin again.. And it now just boots straight to the Samsun logo and sits there until you hold power vol down (or up) and home till it switches to download or recovery. The TWRP is gone somehow and its stock again.
Hope this isn't confusing... I'll answer any questions and try any suggestion... PLEASE HELP
eatfleshzombie said:
Rooted the device with Odin. But couldn't for the life of me find a recovery for it. Flash a ton through Odin then final got a TWRP recovery to work.. When I wiped everything I was instructed to I tried to flash the rom I found (Bliss) I got a could not mount preload error.. And another error I can't recall. Then it just kept looping. So I ran the root file through Odin again.. And it now just boots straight to the Samsun logo and sits there until you hold power vol down (or up) and home till it switches to download or recovery. The TWRP is gone somehow and its stock again.
Hope this isn't confusing... I'll answer any questions and try any suggestion... PLEASE HELP
Click to expand...
Click to collapse
As far as I know there aren't any custom recoveries or roms working for your model number, so that's why nothing is working properly. Your only solution would appear to be to download the stock firmware and flash back to stock with Odin.
thisisapoorusernamechoice said:
As far as I know there aren't any custom recoveries or roms working for your model number, so that's why nothing is working properly. Your only solution would appear to be to download the stock firmware and flash back to stock with Odin.
Click to expand...
Click to collapse
Thanks for the link! I'll do that as soon as I get home.
Do you know if there's any way to get a custom rom onto my tablet?
eatfleshzombie said:
Thanks for the link! I'll do that as soon as I get home.
Do you know if there's any way to get a custom rom onto my tablet?
Click to expand...
Click to collapse
Unfortunately I'm fairly certain there are no custom Roms available for your tablet
thisisapoorusernamechoice said:
Unfortunately I'm fairly certain there are no custom Roms available for your tablet
Click to expand...
Click to collapse
Thats ok
I started the flsh of the stock firmware...seems hung up...does it take very long time to load?... the status hasnt changed in like 5 minutes.
did you get twrp to work? Im trying to get that installed so I can use xposed on the same model I believe sm-t537r4 I have it currently rooted
New to the S4 - did a search and could not find a similar problem as mine...
My friend gave me his S4 and told me it is rooted - which it is. However, there seems to be no recovery on the phone. When I try power-vol up-home, I get the blue recovery note at the top, but then the phone just continues to boot into the system (MF9). I used Odin to go back to stock and then attempted to boot into recovery - no luck. I rooted the phone again via CF Auto Root and tried to install a custom recovery via Odin and TWRP Manager - still no luck. Anyone have any ideas/suggestions? I appreciate the help.
Bumping this up to the top for one more run through...thanks everyone.
Sixbowmans said:
Bumping this up to the top for one more run through...thanks everyone.
Click to expand...
Click to collapse
Maybe go in to Odin mode and flash latest stock making sure to unchecked the auto reboot option. When it finishes flashing unplug and pull the battery, let it boot it'll take a while (took mine about 10-15 minutes). You'll then be on latest stock with latest bootloader and recovery. From there you can go back to Odin mode and flash TWRP. Once again making sure to not auto reboot.
Just to be safe back up apps and msic and picture etc on samsung kies and then do a full recovery delete everything and install the latest firmware then try cf auto root again or if you have trouble with that rhen use kingoroot and then flash twrp or phils recovory and get a rom. If that doesnt work just get cyanogenmod installer which installs root and a stock rom.
Sent from my SM-N910V using XDA Free mobile app
mattzeller said:
Maybe go in to Odin mode and flash latest stock making sure to unchecked the auto reboot option. When it finishes flashing unplug and pull the battery, let it boot it'll take a while (took mine about 10-15 minutes). You'll then be on latest stock with latest bootloader and recovery. From there you can go back to Odin mode and flash TWRP. Once again making sure to not auto reboot.
Click to expand...
Click to collapse
Thanks mattzeller. Your suggestion took me back to my Evo days. I took out the sd card, flashed with Odin, pulled the battery, rebooted the system, and then was also able to boot into recovery.
Hi,
I tried to install CWM on my rooted Note 3 N9005 with the latest 5.0 updates and the default recovery kept overwriting the custom. So I followed the advice on an article to delete the files [/system/recovery-from-boot.p] [/system/etc/install-recovery.sh] an this made my phone to fall in a loop, booting and trying to find these files then rebooting and so on...
I then had no choice but to load the stock ROM via ODIN which fixed the loop.
Is there anyway to install a custom recovery on a Note 3 running 5.0 - I want to do this in order to continue and install a custom ROM.
Thanks in advance for the answers!!
Don't use cwm as it has not been updated for a long time. Download the latest tar version of twrp for your phone.
Open Odin, uncheck everything except f.reset time, flash twrp, when you see the word "reset" in the status window, remove the USB cable from the phone, remove the battery, wait about 5 seconds, replace battery, use button combination to boot into recovery.
Thank you!!
What did the trick was that I quickly removed the battery and went to recovery mode. Even with "Auto Reboot" deselected the phone rebooted so if I left it it would have overwritten again the custom recovery.
Just a quick note to help others... anyone trying to flash Darklord or Phronesis ROM... USE TWRP v.2.8.0 and not the latest. The latest version for some reason won't install the ROMs.
thanx this wad so heapful .
:fingers-crossed::good:
abod7070 said:
:fingers-crossed::good:
Click to expand...
Click to collapse
Could be a year out of date and in some respects it is .
KEY is roms with AROMA installer will not work above 2.8 TWRP .