I am trying to get back to stock with the VRZ_XT907_9.8.1Q-94-1_CFC.xml and keep getting failure, even after deleting the "getvar" lines, any help would be appreciated. Any ideas? I was on the latest firmware.
VannMann said:
I am trying to get back to stock with the VRZ_XT907_9.8.1Q-94-1_CFC.xml and keep getting failure, even after deleting the "getvar" lines, any help would be appreciated. Any ideas? I was on the latest firmware.
Click to expand...
Click to collapse
SS or errors & etc?
Did you do md5 ck?
If I try to boot normally, i go straight to the "Rage M" Screen and sit there. Checking MD5 now.
MD5 checks out OK
VannMann said:
If I try to boot normally, i go straight to the "Rage M" Screen and sit there. Checking MD5 now.
Click to expand...
Click to collapse
You are locked, did you go stk recovery & wipe data?
aviwdoowks said:
You are locked, did you go stk recovery & wipe data?
Click to expand...
Click to collapse
Can't get into it. Goes straight to the "Rage M" logo, and then to the triangle screen
VannMann said:
Can't get into it. Goes straight to the "Rage M" logo, and then to the triangle screen
Click to expand...
Click to collapse
Damn moto engineers!
@ the dead robot press both vol keys for 2-3 sec!
The secret code of motoyoyo!
aviwdoowks said:
Damn moto engineers!
@ the dead robot press both vol keys for 2-3 sec!
The secret code of motoyoyo!
Click to expand...
Click to collapse
I can get out of triangle, no problem. I did just get into stock recovery. Anything i can do from there? Already wiped data and cache.
VannMann said:
I can get out of triangle, no problem. I did just get into stock recovery. Anything i can do from there? Already wiped data and cache.
Click to expand...
Click to collapse
No I ... nvm. IDNK
A ss & the text of the whole error
This is the error I get. And if i remove the getvar line, it just goes down to the next one and fails, and so on. I was using the safestrap 3.12
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
VannMann said:
This is the error I get. And if i remove the getvar line, it just goes down to the next one and fails, and so on. I was using the safestrap 3.12View attachment 2514515
Click to expand...
Click to collapse
Why is there: filename.xml\filename.xml\filename.xml
In the rsd file window?
aviwdoowks said:
Why is there: filename.xml\filename.xml\filename.xml
In the rsd file window?
Click to expand...
Click to collapse
I have ran it from zip and unzip format. Still fail.
VannMann said:
I have ran it from zip and unzip format. Still fail.
Click to expand...
Click to collapse
I think you must do it from a "free" folder!!!!
The xml & all files must be in a "extracted" folder
---------- Post added at 08:47 PM ---------- Previous post was at 08:37 PM ----------
VannMann said:
I have ran it from zip and unzip format. Still fail.
Click to expand...
Click to collapse
You can run a windows .exe from with in a zip but not the target of rsd.
---------- Post added at 08:59 PM ---------- Previous post was at 08:47 PM ----------
VannMann said:
I have ran it from zip and unzip format. Still fail.
Click to expand...
Click to collapse
Both of you have the same root problem it seems.
http://forum.xda-developers.com/showthread.php?t=2606422
---------- Post added at 09:18 PM ---------- Previous post was at 08:59 PM ----------
VannMann said:
I have ran it from zip and unzip format. Still fail.
Click to expand...
Click to collapse
This may help.
http://forum.xda-developers.com/showpost.php?p=40929335&postcount=1
http://forum.xda-developers.com/showthread.php?t=2176753
Problem solved! Found a different cable and all is well now! Thanks for your help, aviwdoowks!
What a Drama!!
aviwdoowks said:
What a Drama!!
Click to expand...
Click to collapse
Wahahahahahahaha, lol. Thanks again for all the help! :highfive:
I'm having trouble with rsd also. When I choose my file I get a dm error. I'm try to go back to stock from stock. Never rooted or anything like that. Just trying to unlock for att and going back to stock and trying again is my only option
Related
I was flashing CM7. This is what I did:
Rooted, ClockworkMod v3.0.0.5 from Rom Manager.
From recovery did a BackUp (seems useless because it doesn't do anything.)
Wipe data/factory reset
Wipe Cache partition
Install zip from sdcard - selected cm7 - got a Status Error 7
Now the phone won't boot, stays on the Google screen, I can get into the recovery though.
Any ideas? I am downloading the Stock 2.3.3 image.
Thanks!
restore your backup.
irishrally said:
restore your backup.
Click to expand...
Click to collapse
I tried doing that from ClockworkMod, gave me an error, it was a ridiculously small file, doesn't seem like a backup.
Even the stock gives me a Status Error 7.
Any ideas?
you didnt brick, just download a a new rom, sounds like it was a bad download.. if the phone shows a screen it isnt bricked...
shabbypenguin said:
you didnt brick, just download a a new rom, sounds like it was a bad download.. if the phone shows a screen it isnt bricked...
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is what I get. For both Stock 2.3.3 and CM7. I've tried multiple times.
right did you re download it and copy it back to the phone or just going off the rom you downloaded already? if so worst case shouldnt odin work?
shabbypenguin said:
right did you re download it and copy it back to the phone or just going off the rom you downloaded already? if so worst case shouldnt odin work?
Click to expand...
Click to collapse
I'm downloading it again. Should I rename it to update.zip? Odin, that's the software right?
I think your problem is because you are using the clockwork mod for I9020, where as for rogers you should be using clockwork for i9023 -- at least this was my case, I have i9020a rogers
you can get it from this link 2nd file.
after using this one you shouldn't be getting "E: can't mount cache" and you shall be able to repeat rooting/flashing steps.
crypticsorr0w said:
I think your problem is because you are using the clockwork mod for I9020, where as for rogers you should be using clockwork for i9023 -- at least this was my case, I have i9020a rogers
you can get it from this link 2nd file.
after using this one you shouldn't be getting "E: can't mount cache" and you shall be able to repeat rooting/flashing steps.
Click to expand...
Click to collapse
I was feeling so, either the ROM or the recovery. I'm just flashing the recovery, thanks for your help.
Also, how do I manually install ClockworkMod?
What is your computer OS? do you have android sdk?
In general everything you need is in this post
http://forum.xda-developers.com/showthread.php?t=955719
crypticsorr0w said:
What is your computer OS? do you have android sdk?
In general everything you need is in this post
http://forum.xda-developers.com/showthread.php?t=955719
Click to expand...
Click to collapse
It worked, I used fastoot and Terminal. Worked like a charm. Thanks again.
http://developer.android.com/preview/setup-sdk.html#top
It's up guys!
Downloading now.
I'll edit this once I get it running with how to do it and everything even though I assume you guys know what you're doing.
Dark69Slayer said:
http://developer.android.com/preview/setup-sdk.html#top
It's up guys!
Click to expand...
Click to collapse
factory img. are up!!!!!!:good::good::good::good:
http://storage.googleapis.com/androiddevelopers/preview/razor-lpv79-preview-d0ddf8ce.tgz
Dirty flashing ended up in a bootloop for me it didn't boot for like 10m will try clean install
---------- Post added at 07:57 PM ---------- Previous post was at 07:56 PM ----------
It didn't even show the Android is updating window (and keep in mind it's also art so it might result in longer fist boot time
As usual, DEB left behind!.
I flashed, tried dirty no go, stuck in forever animation. wiped and reflashed. Its booted setting up now.
Build number: LPV79
boot.img is different to KTU84P
bootloader is identical to KTU84P
system & userdata files... have a guess
Just fastboot flashed the image onto my N7 without erasing userdata, appears to be boot-looping as previously mentioned in this thread.
New encryption passphrase screen though!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Performing a full flash now...
flashable zip
can someone make a flashable zip please
made-in-tirol said:
can someone make a flashable zip please
Click to expand...
Click to collapse
Judging by the experiences of others in the thread so far, don't expect to be able to flash this over 4.4.4 without ending up in a boot-loop; so just backup your data and use the factory image.
made-in-tirol said:
can someone make a flashable zip please
Click to expand...
Click to collapse
I'd like one too because I'm at work no access to fastboot.
Sent from my XT1060 using Tapatalk
Can someone confirm this works fine on flo? I see images for razor only?
Legacystar said:
I'd like one too because I'm at work no access to fastboot.
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
All of you asking for a flashable zip, use the toolkit to make it unless you can't use the toolkit aswell.
doombox414 said:
Can someone confirm this works fine on flo? I see images for razor only?
Click to expand...
Click to collapse
Razor is flo. Razor is the device name, flo is the name of the circuit board.
doombox414 said:
Can someone confirm this works fine on flo? I see images for razor only?
Click to expand...
Click to collapse
Razer = flo
Sent from my Nexus 7 using Tapatalk
Just completed flashing System Image.
Initially Stuck at boot animation for 5 minutes.
Powered off tablet by holding power button. and powered on successfully booted
Installing apps now. but i am seeing some lags even when accessing play store
Just used the flash-all.bat through fastboot and it worked perfectly. If you dont have the PATH variables set up it wont work but the commands you need if you place the bootloader.img and the image.zip in your platform-tools folder are:
fastboot flash bootloader bootloader-flo-flo-04.02.img
fastboot reboot-bootloader
fastboot -w update image-razor-lpv79.zip
Took awhile to start up but it was all fine. running it through the paces now.
This will wipe userdata as well, just as an FYI.
username4this said:
All of you asking for a flashable zip, use the toolkit to make it unless you can't use the toolkit aswell.
Click to expand...
Click to collapse
Flashable zip would be nice for us using multirom.
I flashed it. I thought it might have bootlooped, so I left it for a while just in case and it booted fine. Is the circle key supposed to be home as it's broken on my dirty flash?
dobbs3x said:
Flashable zip would be nice for us using multirom.
Click to expand...
Click to collapse
We know, you've said it twice now!
Sent from my Kang'd Nexus 7 (2014) using Tapatalk. My mobile is a Linaro & SM CM11 run Galaxy S3.
username4this said:
All of you asking for a flashable zip, use the toolkit to make it unless you can't use the toolkit aswell.
Click to expand...
Click to collapse
Is there a toolkit I can use on mobile because I don't have access to my PC till later
Sent from my Nexus 7 using Tapatalk
Hi,
Please help me I have G928c it was working wonderful and I deleted al my google accounts and I added new google account
After diing restart to my phone I saw it not working it say to my
custom binary blocked by frp
And stoo work
Help me please guys
What I can do
Are you rooted? If not I think a factory reset is the only way. You should have added the new account and THEN deleted the old accounts, you've tripped the OEM lock.
B3311 said:
Are you rooted? If not I think a factory reset is the only way. You should have added the new account and then deleted the old accounts, you've tripped the OEM lock.
Click to expand...
Click to collapse
Yes I rooted my phone
Ok. Do you have a nandroid backup?
B3311 said:
Ok. Do you have a nandroid backup?
Click to expand...
Click to collapse
No... !!!
In that case a factory reset is your only option? As said, you tripped the OEM lock, which will happen automatically if you haven't disabled it and you remove all google accounts without adding another.
You'll be fine after a reset. If you want to disable the lock it's in settings>developer options.
B3311 said:
In that case a factory reset is your only option As said, you tripped the OEM lock, which will happen automatically if you haven't disabled it and you remove all google accounts without adding another.
You'll be fine after a reset. If you want to disable the lock it's in settings>developer options.
Click to expand...
Click to collapse
No i deleted olde account after that I created a new account on my phone after created a new account I did restart my phone and got frp lock
I meant there a new account in my phone
If that can help to fix frp lock without factory reset it will be good
If not, how I can do factory reset
Actually my phone not opening after press power button I got frp lock
Help
Thank you
That's exactly why you're locked! You deleted the old account first. Then the phone sees no valid google account is present and so locks. You must add the new account first and then delete the old one if you want to use a new account.
Factory reset - reboot into recovery, which is Volume up+ power+home buttons simultaneously. Wait a minute and scroll to wipe data/factory reset. Unfortunately you'll lose everything you've added (photos etc).
B3311 said:
That's why you're locked! You deleted the old account first. Then the phone sees no valid google account is present and so locks. You must add the new account first and then delete.
Click to expand...
Click to collapse
Now how I can solve that now
taha4u said:
Now how I can solve that now
Click to expand...
Click to collapse
See above?
B3311 said:
See above
Click to expand...
Click to collapse
Sorry doesn't working I got the same message
Custom binary blocked by frp lock :crying:
After pressing up volume + home + power
I got this see the photo I tooked from my phone now
taha4u said:
Actually my phone not opening after press power button I got frp lock
Help
Thank you
Click to expand...
Click to collapse
Turn the phone off before rebooting into recovery with the button combination I gave you.
---------- Post added at 11:37 AM ---------- Previous post was at 11:25 AM ----------
Keep the 3 buttons held in/pressed, don't let go of any of them until you see the robot animation. It's vital that all are held in simultaneously.
B3311 said:
Turn the phone off before rebooting into recovery with the button combination I gave you.
---------- Post added at 11:37 AM ---------- Previous post was at 11:25 AM ----------
Keep the 3 buttons held in/pressed, don't let go of any of them until you see the robot animation. It's vital that all are held in simultaneously.
Click to expand...
Click to collapse
I now that and my phone doesn't opening it is off already.
I got this see the photo I tooked from my phone now
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can you go into download mode?
B3311 said:
Can you go into download mode?
Click to expand...
Click to collapse
Yes I can
Weird that you can go into download but not recovery? but that means you can flash a new firmware.
B3311 said:
Weird that you can go into download but not recovery but that means you can flash a new firmware.
Click to expand...
Click to collapse
Yeah... I think there no way to do any thing !!!
Im going to install new firmware that means im losting all my data :crying:
Thank you bro !!
Frp unlock g928c
taha4u said:
Yeah... I think there no way to do any thing !!!
Im going to install new firmware that means im losting all my data :crying:
Thank you bro !!
Click to expand...
Click to collapse
Download link for Iran
PARSI-ROM
COM
Hello,
I just bricked my X720 phone yesterday, and I`m so dissapointed. The phone is totally dead. I manage just to connect it only on Qloader 9008 dl mode with Qfil and Xiaomi flasher, but I need the special recovery files: rawprogram0.xml, patch0.xml, prog_ufs_firehose_8996, and so on....
Please if anybody can help me with the files, or any other solution I would be deeply greatful !!! Thank you in advance.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
you'll find it under ....guides and news..!!
Sent from my LEX720 using XDA-Developers mobile app
Okarina26 said:
you'll find it under ....guides and news..!!
Sent from my LEX720 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank, but the files are not to find there......
I think what you need is full factory image. recovery are meant to flash recovery software under recovery partition. Android smartphone don't just have a few partitions. Say if you flash TWRP to the wrong partition, then you may need to flash factory image to the phone and start over.
Yes. I agree....
Nobody can help me ???
Does anyone own this phone ??? I need to ask for an favour:angel::angel:
this is a factory stock rom. i am not sure how to copy it to your phone, but if you could, then do a recovery : press volume + and Power together
https://mega.nz/#!ykRkhbjL!D-7Z5eGmu...KJFoCw6y6DBbKQ
---------- Post added at 10:20 PM ---------- Previous post was at 10:18 PM ----------
sorry, this link works
https://mega.nz/#!ykRkhbjL!D-7Z5eGmuOEtCEVon8PoQ08Xt8csaKJFoCw6y6DBbKQ
samsungandriod said:
this is a factory stock rom. i am not sure how to copy it to your phone, but if you could, then do a recovery : press volume + and Power together
https://mega.nz/#!ykRkhbjL!D-7Z5eGmu...KJFoCw6y6DBbKQ
---------- Post added at 10:20 PM ---------- Previous post was at 10:18 PM ----------
sorry, this link works
https://mega.nz/#!ykRkhbjL!D-7Z5eGmuOEtCEVon8PoQ08Xt8csaKJFoCw6y6DBbKQ
Click to expand...
Click to collapse
Thank for your answer, but I have this file, and it`s not enough for the Sahara download mode. I need the special recovery files: rawprogram0.xml, patch0.xml, prog_ufs_firehose_8996.. Take a look....
http://forum.xda-developers.com/showpost.php?p=69292032&postcount=4
cacimbo said:
http://forum.xda-developers.com/showpost.php?p=69292032&postcount=4
Click to expand...
Click to collapse
It does not work for me, because my phone does not even start.....Thanks anyway !!!!
Please, anyone with the Pro3 x720 PM me !!!!
Nobody can make a backup with Qfil or Emmc ??? Please...
I guess if u explain exactly how we can provide u this files we could help u.
I have a x720 if I can help u in anyway message me.
You have PM message. If other users who know how to backup your phone, so that I can recover please let us know here below. Thanks in advance !!!
amdtip said:
You have PM message. If other users who know how to backup your phone, so that I can recover please let us know here below. Thanks in advance !!!
Click to expand...
Click to collapse
Will receive the phone soon. It's just an nandroid via TWRP, so you can restore it, right?
Drowzz said:
Will receive the phone soon. It's just an nandroid via TWRP, so you can restore it, right?
Click to expand...
Click to collapse
No it`s not enough !!! The phone does not boot. All these options are not available
If someone can guide us How secXces_debaki, can do a full backup, including the rawprogram0.xml, patch0.xml, prog_ufs_firehose_8996, and so on, please guide us here.
Please someone can guide us how to make full backup, including the rawprogram0.xml, patch0.xml, prog_ufs_firehose_8996 !!!!
Hi,
I also bricked my phone. I did have some problems to get into Qualcom 9008 EDL mode. You get into this mode by booting the phone with all buttons (vol +, vol - and power) pressed. Now according this thread:
http://www.androidbrick.com/unbrick...-you-have-the-right-kind-of-rom-qhsusb_dload/
withh the xiaomi flash tool is poteitally also able to flash this phone. So I downloaded the newest Xiaomi flash tool and the le pro 3 firmware LE_ZL1_LEX720-CN-5.8.017S.zip. However I now ran out of luck. The tool comlains about a hello packet not received from the phone.
Did you already have some more luck with flashing he phone?
I also found this thread:
http://forum.le.com/us/index.php?threads/letv-x800-hard-brick-qualcomm-hs-usb-qdloader-9008.262/
gr,
Michiel
michielm74,
They will not work, until we manage to get the original files, extracted from an X720 phone. Until then..........:crying::crying:
Anybody with X720 with Twrtp and SU installed ????
I wanted to install xposed framework on my S7 edge but it failed due to some reason about not being able to mount/system or something. To fix that, i reformatted my /system and /data to FAT from TWRP. part way through reformatting /data, it froze and i restarted my phone, now it was unable to boot into recovery. I then attempted to reinstall the stock rom from ODIN and now it boots straight into a flat orange screen. Within this screen, i can hear the change in volume when i press the volume buttons, the LED on my phone is on (blue) and i can turn the screen on and off with the power button. It seems like a normal functioning phone, just with an orange screen that wont change.
If anyone can help me fix this problem i would really appreciate it, any help is valuable and if you need anything that im able to provide, i will.
Thanks.
Edit: I can sometimes get it into download mode and the TWRP screen loads, but then nothing happens.
I may not be able to fix your problem but I am curious, why would you format to FAT when the standard filesystem used is ext4?
Wesley0104 said:
I may not be able to fix your problem but I am curious, why would you format to FAT when the standard filesystem used is ext4?
Click to expand...
Click to collapse
I watched a video and it said to do it, yes, it was a bad idea.
What i have done was reinstall TWRP and it works now. Still orange screen. Where do i go from here?
Why on earth did you format to FAT? Android/data, /system and /boot are EXT4. /sd card is FAT.
Think you'll have to reflash stock firmware with Odin, assuming you can still get into download mode. Your non-external sd card data is probably history though.
B3311 said:
Why on earth did you format to FAT? Android/data, /system and /boot are EXT4. /sd card is FAT.
Think you'll have to reflash stock firmware with Odin, assuming you can still get into download mode. Your non-external sd card data is probably history though.
Click to expand...
Click to collapse
I managed to reformat the partitions to ext4 and TWRP works after reinstalling it 3 times. I try flashing the stock firmware to my phone but get a "FAIL"
camkaley said:
I managed to reformat the partitions to ext4 and TWRP works after reinstalling it 3 times. I try flashing the stock firmware to my phone but get a "FAIL"
Click to expand...
Click to collapse
Reflashing with Odin I hope and not TWRP?
B3311 said:
Reflashing with Odin I hope and not TWRP?
Click to expand...
Click to collapse
Yes sir.
And you've extracted the necessary .tar etc files from the stock FW? I'm assuming you are very new to this, just making sure you're covering everything. And please describe exactly what happened when you tried to flash Xposed. Which version, installer etc. A screenshots of your Odin fail would be helpful too.
B3311 said:
And you've extracted the necessary .tar etc files from the stock FW? I'm assuming you are very new to this, just making sure you're covering everything. And please describe exactly what happened when you tried to flash Xposed. Which version, installer etc. A screenshots of your Odin fail would be helpful too.
Click to expand...
Click to collapse
Yeah, im new. I extract the files from the .zip and then put them into each slot in Odin eg - AP, BL etc...
Screenshots please. Which Odin version are you using?
B3311 said:
Screenshots please. Which Odin version are you using?
Click to expand...
Click to collapse
Yes, one moment.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
camkaley said:
Click to expand...
Click to collapse
Wrong firmware. You're flashing 930F, that's for the "flat" S7. You need 935F firmware.
B3311 said:
Wrong firmware. You're flashing 930F, that's for the "flat" S7. You need 935F firmware.
Click to expand...
Click to collapse
Is this the right one?
http://prntscr.com/d6anog
I live in Australia.
Also, thanks for pointing that out. I thought i had the right one :\
Yep, that should do. Don't know where you got it, samfirmware is the place otherwise. Is your original firmware branded, i.e are you tied to a specific network carrier?
B3311 said:
Yep, that should do. Don't know where you got it, samfirmware is the place otherwise. Is your original firmware branded, i.e are you tied to a specific network carrier?
Click to expand...
Click to collapse
Yeah, "Optus" is the one. I couldnt see an optus firmware there, ill take another look.
camkaley said:
Yeah, "Optus" is the one. I couldnt see an optus firmware there, ill take another look.
Click to expand...
Click to collapse
I found the optus version. Is there any reason to download that over the standard one?
OK. We'll sort this out! I'm no expert, but I've made every f-up possible with Odin/TWRP, so I'm an expert at rectifying my mistakes...
Off out for lunch, back in 2 hours. Hopefully you'll be fixed by then but I'll check. One other thing in Odin - in options, check "F-reset time" but NOTHING ELSE.
---------- Post added at 12:33 PM ---------- Previous post was at 12:31 PM ----------
camkaley said:
I found the optus version. Is there any reason to download that over the standard one?
Click to expand...
Click to collapse
Don't think so, but I've never been carrier locked. I'd use it just to get up and running again, you can always flash something else later.
B3311 said:
OK. We'll sort this out! I'm no expert, but I've made every f-up possible with Odin/TWRP, so I'm an expert at rectifying my mistakes...
Off out for lunch, back in 2 hours. Hopefully you'll be fixed by then but I'll check. One other thing in Odin - in options, check "F-reset time" but NOTHING ELSE.
---------- Post added at 12:33 PM ---------- Previous post was at 12:31 PM ----------
Don't think so, but I've never been carrier locked. I'd use it just to get up and running again, you can always flash something else later.
Click to expand...
Click to collapse
Thanks mate, ill keep updating here if i encounter more problems ill post them here. Thanks for the help so far. Im in a better spot than when i started this thread
I reinstall the stock firmware and currently it is installing applications. Looks like it is going to be fine. Next step is to make a backup and install xposed.