Related
I went to update the BOYPCC rom and went into clockwork recovery and update zip but there are no zips showing.
There are 4 zips on the card and none of them can be seen.
I did a google search and found one that said backup the card format then reinstall everything but that didn't work I also tried reinstalling clockwork but that didn't work.
Anyone had this problem and solved it?
Sometimes when you have alot of crap on your sd card, it won't show your .zip file when u scroll down. Try scrolling up instead, its happened to me before and that worked.
Sent from my HTC HD2 using XDA App
I formatted the card and only had that ZIP on there and it still came up no files found
The zip file is likely not correctly zipped or incomplete. Try and download the zip again then put it on your card. Is the phone recognizing your card?
david.springfield said:
I went to update the BOYPCC rom and went into clockwork recovery and update zip but there are no zips showing.
There are 4 zips on the card and none of them can be seen.
I did a google search and found one that said backup the card format then reinstall everything but that didn't work I also tried reinstalling clockwork but that didn't work.
Anyone had this problem and solved it?
Click to expand...
Click to collapse
I tried BOYPCC rom before, and went to [SD] RAFDROID HD 4.2|Fastest Full DesHD [MAGDLR/WINMO][K: Rafp 1.9 OC]
you need to place those zip files into the root.
not where else but the root else it can't be seen.
They are in the root, even the one I used to last update the phone via clockwork can't be seen.
The phone is recognising the card as it is showing the folders on it.
You might want to try re-flashing cwm, or try a different version of it. Thats really the only other thing I can think of at this point
Sent from my HTC HD2 using XDA App
First of all, I'm sorry if there is a thread similar to this, or with the same purpose. I'm opening this thread because I've tried almost every mod for LG GT540 and I don't know what to use anymore...
Been a long Cyanogen mod user, I've now changed to Super Fast Froyo and I find it really as it says SUPER FAST.
What I'm asking you is, if you can tell me what is the best mod for playing games the phone wasn't designed for (any 3D game), surfing (without force closes), and using the phone as a PHONE (calls, messages - without force closes)
I've tried OpenSwift (don't know what version) about 3 months ago.. and I was able to play games, but in that time the mod wasn't stable...
Also, Cyanogen 7 (2.3.3) and I wasn't able to play games.. though the phone worked smooth, with some force closes and few restarts..
I've searched lots of forums, but everywhere there are persons saying this is better than that and vise versa..
That's normal yea.. but got tired of that, and decided to open a thread here..
About the games not playing.. well I maybe am a beginner.. but I've tried everything I could..
Any help appreciated ..
Thanks.
Stay on a custom 2.1 rom it will solve all ur problems..
Use swap for speed.
Link sd for unlimited storage space.
Nothing is as stable as 2.1 version.
Sent from my GT540 using XDA App
I agree with sanmit that everything works in 2.1 and for games is good. So you should stay in one of the many good custom versions out there. And check the other posts until devs cook something worth it to change again. Now mur4ik has released version 2.0. So will see how it goes and inform
Sent from my GT540 using XDA App
Thanks for replying!
I've decided to go with Elegance Swift 2.1, but I have a problem now... I can't flash it with Clockwork Recovery... it says "installation aborted"
I have wiped user data, phone, cache.. everything but it just doesn't work.. Is there a way to do this with fastboot? That's lots easier.. but I see a file called "data.img" here and don't know how to write that on phone
Thanks.
buya new phone?
just sayin, i dont think the gt540 is the best one for gaming. as its not capacitive screen. so you cant play mario or something smooth. but yeah as said above the stock 2.1 is the best. as i hav the SwiftDroid milestone1 V2.0 android 2.3.3 the battery dies too quick to play many games.
I don't want new phone lol
by the way... I found out how to install via Recovery.. but now my phone won't boot.. it's stuck on LG LOGO...
I can't post in developers threads.. and I can only ask here..
hi mate you need to flash both the recovery image and the boot image that should get your phone working again
eoghan2t7 said:
hi mate you need to flash both the recovery image and the boot image that should get your phone working again
Click to expand...
Click to collapse
Well.. I flashed clockwork recovery (if that's what you meen) and using CR i used the option restore to actually install the Elegance Swift 2.1 mod
do i have to flash the boot image after i did this with fastboot or?
EDIT
Did use fastboot for boot.img, still the same problem...
if you flashed via recovery then the boot.img should have been included in the backup so in what i will do is download the rom your tring to use and make a fresh backup and upload it for you
link me to the thread you downloaded the rom from
eoghan2t7 said:
if you flashed via recovery then the boot.img should have been included in the backup so in what i will do is download the rom your tring to use and make a fresh backup and upload it for you
Click to expand...
Click to collapse
Wow.. thanks..
h* t p : // www . multiupload.com/WP41EZA5BO
this is what I used (with Clockwork Recovery 3.0.0.5 - i know that there is newer)
ok give me half an hour and ill get you a working version of this
uploading now for you i have included the easy flash tool
download this and put your phone in fastboot mode then run the start me.bat in the zip folder hopefully that should work
http://www.sendspace.com/file/a8l3hg
Thanks for the effort .. but I'm getting FAILED (data transfer failure (Too many links))
when trying to send system.img to phone
EDIT
I'm using XP SP3, does that changes anything? :\
EDIT 2
Can you just tell me how to do this with Clockwork?
to do it via recovery copy the zip file you and me downloaded to to the root of your sd card then go into recovery and select install update zip then select choose update zip and then select the zip file you copied to the root of the sd card
eoghan2t7 said:
to do it via recovery copy the zip file you and me downloaded to to the root of your sd card then go into recovery and select install update zip then select choose update zip and then select the zip file you copied to the root of the sd card
Click to expand...
Click to collapse
It worked, finally!
Thanks a lot for you time and help
no problem anytime
I think that CM7 is a lot better than 2.1 in many terms. (battery is worse, but it still lasts 2 days)
Use the stock 2.1 thats the best for your wishs...
Its the most useful...
i try everything but always back to stock or soft mod 2.1
This is for everyone that wants to easily root and install CWM on their Neo X5 without having to go through the hassle of hooking it up to a computer and downloading/installing 3rd party tools + drivers. So far, every tutorial I've come across suggests using a comp must be done so I thought it would be a good idea to write up how I accomplished this without all that hassle.
All steps below can be done directly from the device itself -- all you need is a file explorer and browser of your choice:
1) Download CWM for the Neo X5 here: http://androtab.info/clockworkmod/rockchip/rk3066/
2) Download a CWM compatible pre-rooted ROM of your choice. Top contenders are:
a) Finless 1.2b: http://www.freaktab.com/showthread.php?4485-CWM-Minix-Roms
b) Kirk out v1.6: http://minixforums.com/threads/rom-kirk-out-neo-x5-4-1-1_0117-v-1-6.313/
3) Using a file explorer of your choice, move the CWM recovery zip that you just downloaded in Step#1 to the root of your /sdcard directory and rename it "update.zip"
4) You should now automatically be prompted to install the update using the system's stock updater process -- Accept the update.
5) Your system should automatically install the update and should automatically boot into CWM when done.
5a) (Optional) Once in recovery you can make a nandroid backup of your current stock rom.
6) Using CWM, use the options to install a zip for /sdcard and select the zip for the ROM you downloaded in Step#2
7) After installation is done, go back to the main CWM menu. Select "Wipe Cache" and then:
7a) Recommended: "Wipe Data". This will wipe all your apps and settings but ensure that it is a clean install.
or
7b) "Advanced -> Wipe Dalvik Cache". This will preserve your data and is known as a dirty flash. It should work but there is always a risk of a bootloop upon reboot.
8) Reboot the system and enjoy. You should now be rooted with CWM installed.
Credits:
- Finless Bob and onelovekir for their ROMs
- leolas for his tutorial on how to create a flashable CWM zip
- petrus for applying leolas' tutorial to the Finless 1.2b rom so I wouldn't have to
- _fun for porting CWM to the Neo X5
- Minix for creating an awesome device
In step 3 is the location the internal sd card or the external as I have been using the external sd card without success. On the pre installed explorer app the internal storage is called Flash so is this where I put it
Ray2013 said:
In step 3 is the location the internal sd card or the external as I have been using the external sd card without success. On the pre installed explorer app the internal storage is called Flash so is this where I put it
Click to expand...
Click to collapse
Internal sdcard (which should be labeled as /mnt/sdcard)
It won't work on the external card
Boot problem.
I might have screwed my Neo G4.
Please help me.
I booted into CWM, and made a backup of my original firmware.
Then i formated system, cache and data, and wiped data/factory, cache and dalvick.
i tried to install a custom rom, but the instalation was aborted.
When i rebooted mi Neo G4, it never boot, only black screen.
How do i boot into CWM now?
I need that to restore the backup i made.
It is posible to build a bootable SD card for this device?
Thank you!
tweetycontrabajo said:
I might have screwed my Neo G4.
Please help me.
I booted into CWM, and made a backup of my original firmware.
Then i formated system, cache and data, and wiped data/factory, cache and dalvick.
i tried to install a custom rom, but the instalation was aborted.
When i rebooted mi Neo G4, it never boot, only black screen.
How do i boot into CWM now?
I need that to restore the backup i made.
It is posible to build a bootable SD card for this device?
Thank you!
Click to expand...
Click to collapse
Here is something to consider. In this post on RockChip RK30 Common Bug - External SDcard Corruption! where finless bob talks about *writing* to the external SD card causing corruptions. But, I am wondering about this:
Format your sdcard using windows as FAT32 and copy the recovery update.zip to the root directory using windows or other. Then after you insert in the Neo G4 you will not be *writing* so you should not experience noted corruption attempting a recovery by only *reading* the files.
I read the OP comment that booting does not work from external sdcard. So, I am researching this now on my devices.
But, I do not know how to boot the device into recovery from black screen. Good luck with your research.
If i had only restored my backup before i rebooted.
I hope TVE bootable sdcard work.
Thanks anyway.
Sent from my MB860 using xda app-developers app
tweetycontrabajo said:
If i had only restored my backup before i rebooted.
I hope TVE bootable sdcard work.
Thanks anyway.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
I just read this thread and one guy says you get recovery by holding a pin in reset and plugging in power. I do not know, but you can try.
Good luck.
tweetycontrabajo said:
I might have screwed my Neo G4.
Please help me.
I booted into CWM, and made a backup of my original firmware.
Then i formated system, cache and data, and wiped data/factory, cache and dalvick.
i tried to install a custom rom, but the instalation was aborted.
When i rebooted mi Neo G4, it never boot, only black screen.
How do i boot into CWM now?
I need that to restore the backup i made.
It is posible to build a bootable SD card for this device?
Thank you!
Click to expand...
Click to collapse
Holding the reset pin while powering up should boot you into recovery so you can restore your backup (or install a ROM after redownloading and verifying the MD5)
If all that fails, I just read this interesting post.
Okay. I'm done now. LOL
OMG es working!
Restoring now!
Thank you so muchos guys.
I can't wait to try custom roms.
Can i flash x5 roms un my g4?
Where can i find custom roms? I want to try pi****u.
Sent from my MB860 using xda app-developers app
tweetycontrabajo said:
OMG es working!
Restoring now!
Thank you so muchos guys.
I can't wait to try custom roms.
Can i flash x5 roms un my g4?
Where can i find custom roms? I want to try pi****u.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
There is a version of the Kirkout ROM for the G4: http://minixforums.com/threads/rom-kirk-out-neo-x5-g4-4-1-1_0117-v-1-6.313/
I believe someone made an unofficial version port of the Finless ROM for the G4 as well on the same site. It is not officially supported though. I've been pretty happy with the Kirkout ROM on my X5 so I would suggest giving it a whirl.
Cool. Is there a remote control app forma that particular rom?
RK remote doesn't even work with old stock Firmware.
Sent from my MB860 using xda app-developers app
Ordered mine a few days ago. Looking forward to fondle it! Stand by for a thank you as soon as I'm up and running.
Verstuurd vanaf een Galaxy Nexus met CM10
HDMI Signal not detected after update
I followed the instructions at the top of this thread to update the firmware of my Minix Neo X5 to the Finless 1.2b version (720 with airpin). Everything went as described but after rebooting in the last step I no longer get an HDMI signal from my Minix. I have tried my standard Samsung TV that worked fine before and also on my standard Acer computer screen without luck.
Does anyone have any idea about what might have happend and how I can get my Minix up and running again?
explodo said:
I followed the instructions at the top of this thread to update the firmware of my Minix Neo X5 to the Finless 1.2b version (720 with airpin). Everything went as described but after rebooting in the last step I no longer get an HDMI signal from my Minix. I have tried my standard Samsung TV that worked fine before and also on my standard Acer computer screen without luck.
Does anyone have any idea about what might have happend and how I can get my Minix up and running again?
Click to expand...
Click to collapse
I would start all over. Did you make a nandroid of your original ROM? Did fresh install or dirty? Worse case scenario you can restore the original ROM and then dirty flash.
tweetycontrabajo said:
Cool. Is there a remote control app forma that particular rom?
RK remote doesn't even work with old stock Firmware.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Sounds like maybe a problem with your phone.....I've used rkremote with stock, finless, and kirkout(which is what im currently using).
explodo said:
I followed the instructions at the top of this thread to update the firmware of my Minix Neo X5 to the Finless 1.2b version (720 with airpin). Everything went as described but after rebooting in the last step I no longer get an HDMI signal from my Minix. I have tried my standard Samsung TV that worked fine before and also on my standard Acer computer screen without luck.
Does anyone have any idea about what might have happend and how I can get my Minix up and running again?
Click to expand...
Click to collapse
Are you able to boot into recovery by holding down the rest pin while powering up?
slimshotty said:
I would start all over. Did you make a nandroid of your original ROM? Did fresh install or dirty? Worse case scenario you can restore the original ROM and then dirty flash.
Click to expand...
Click to collapse
I did not back up my original ROM. As I had no HDMI signal from the device I resorted to OTG Flashing. I tried to install Finless 1.2b using the Finless ROM flash tool (RKAndriodTool v1.35). I no longer got "No signal" message but just a black screen at booting, the same happened when I tried to boot into recovery. I tried both 720 and 1080 versions.
I did not dare to test with Kirk out from OTG as he clearly says that it is only for CWM.
I then tried to reinstall CWM-based Recovery with RKAndriodTool following the instructions on androtab. Still just got black screen when trying to boot into recovery.
I flashed one more time with RKAndriodTool using Finless 1.2b 720 with airpin. When I booted into recovery I noticed some white pixels flashing on the screen that I had not seen before. I left the device running and after a long time the Finless start image (Black droid) apeared but nothing more happened.
I Rebooted 2 times and finally now I'm up and running Finless. Im not shure if everythin is ok yet, I think everything seems a bit slow but I guess I will have to run it a bit to know for shure.
I'm glad that Minix has made such a sturdy device. I guess a lot of other devices would have been bricked by now with all the messing about I've been doing.
i was only able to use rk when i updated the minix firmware.
well, i'll give a try to finless. if remote don't work, i'll go back to minix firmware.
thank you
Sent from my MB860 using xda app-developers app
A note on the RKRemote app, I believe WiFi on the X5 has to be enabled even if the device is connected via ethernet. I am pretty sure I read that somewhere.....can't test myself since I only have my device connected via WiFi (no LAN port in the room I have it in).
yes, the device has to be connected to the same wifi network that the mobile with rk remote
Sent from my MB860 using xda app-developers app
Hello,
I wonder if you could help me. I'm going mad here. I've broken my S4 and I wasn't even tinkering with it, really.
I've had it since May.. When I set it up, I rooted it, but haven't actually used the feature for anything. I've been running stock kernel and ROM ever since.
I've also had that widespread issue that people seem to get all the time with SD cards where every single time you turn the phone off and on again, it comes up with a warning that the SD card is damaged and only a manual mount will fix.
It happened yesterday but on this occasion, my card wouldn't mount.. It just said that it was damaged and refused to mount.And that's when the trouble started.. i restarted the phone on multiple occasions, did battery pulls but it was just behaving oddly.. the camera kept saying 'camera failed' before and after the pulls (the SD card was out of it by this point)..the phone was overheating.. it kept on crashing..etc
So I did a reluctant factory reset.. It crashed several times in doing so and has now restarted without going through the Google welcome setup. That's because there are no Google apps on it.. there is no playstore and a thing comes up in the notification area telling me i need to install Google services but then crashes when I tap on it. I've sideloaded Google Play but it tries to sign me in and then crashes because it needs this Google Services thing.
I can't update the software because it's rooted so it comes up with a warning saying I have modified my device and don't have access to updates. Which means I can't take it back under warranty.
Without the Play Store, I can't access Triangle Away (which I assume I would need before de-rooting even if I haven't installed a custom ROM or kernel, just to remove any trace of rooting) and I can't download CWM to try to flash a new ROM to try to fix it myself.
I must also say I don't have access to a Windows machine to do anything on.. Just my MacBook Pro.
It's 30 degrees outside, I have a useless phone on my hands and I'm baking up here as I lose my will to live. Please, if anybody can help, let me know.
Thanks so much in advance.
try reflashing to stock firmware using odin follow this http://forum.xda-developers.com/showthread.php?p=41072426
i dont think you will need this still .... if flashing back to stock firmware doesnt solve the whole problem try this....
here -- http://forum.xda-developers.com/attachment.php?attachmentid=2060897&d=1371888678
apk for TriangleAway v3.00 install it using file manager on your phone..
dont worry your phone can be unbricked * most probably * :good:
noobismyname said:
try reflashing to stock firmware using odin follow this http://forum.xda-developers.com/showthread.php?p=41072426
i dont think you will need this still .... if flashing back to stock firmware doesnt solve the whole problem try this....
here -- http://forum.xda-developers.com/attachment.php?attachmentid=2060897&d=1371888678
apk for TriangleAway v3.00 install it using file manager on your phone..
dont worry your phone can be unbricked * most probably * :good:
Click to expand...
Click to collapse
Thank so much for taking the time to help me out here. I'm gonna try all this.
philliplavelle said:
Thank so much for taking the time to help me out here. I'm gonna try all this.
Click to expand...
Click to collapse
So, I'm stuck at the first hurdall.. I have no PC access.. Only my MacBook Pro.. I can't seem to find a working version of Odin for Mac.. the search on here brings up something called Heimdall.. Am I ok to use that?
UPDATE: Jeez, Heimdall looks complex! I don't think I can do it. It doesn't seem to want to play with the .tar files in the original FW I've downloaded and God knows how I'm supposed to extract it. This is way too complex for me. I am not exaggerating.. I have no access to a PC that I can use (other than my work one which has a strict IT policy stopping installation of anything on it.)
I'm looking around for Odin for Mac.. some places say it exists but I can't find an actual programme and I haven't a clue where to start with terminal. I'm a bit tech savvy - I'm not that much so though
@philliplavelle
Here's a link to a Dropbox folder containing an app called Sgs4 flasher install this, with this you can flash the PhilZ CWM recovery .tar file (also in the same folder) and I have also included Triangle Away by Chainfire.
http://db.tt/IUnFGpP6
Once you have PhilZ CWM installed you can then perform factory reset, wipe data and dalvik. If that doesn't work then go to mounts and storage and format system, data and cache. BEFORE YOU DO THIS MAKE SURE YOU HAVE A FLASHABLE ROM. ZIP FILE ON YOUR PHONES INTERNAL SD CARD, DO NOT FORMAT SD CARD.
then you can go to install zip from SD card and flash new ROM
Sent from my GT-I9505 using XDA Premium HD app
Obagleyfreer said:
@philliplavelle
Here's a link to a Dropbox folder containing an app called Sgs4 flasher install this, with this you can flash the PhilZ CWM recovery .tar file (also in the same folder) and I have also included Triangle Away by Chainfire.
http://db.tt/IUnFGpP6
Once you have PhilZ CWM installed you can then perform factory reset, wipe data and dalvik. If that doesn't work then go to mounts and storage and format system, data and cache. BEFORE YOU DO THIS MAKE SURE YOU HAVE A FLASHABLE ROM. ZIP FILE ON YOUR PHONES INTERNAL SD CARD, DO NOT FORMAT SD CARD.
then you can go to install zip from SD card and flash new ROM
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
Thank you for this. The file I have of the FW was downloaded from the post the first person who answered quoted. On my Mac, it's not a .zip file, it's a folder with a .tar.md5 file and another ssl one or something. Am I not able to flash these? They are not .zip. Apologies if I'm being extremely stupid.
UPDATE: Flashed PhilzCWM - but the phone won't enter recovery mode. It boots up, and the little tiny blue writing at the top implies it is going into recovery mode, but it doesn't. Screen just sits at black and then it vibrates again and goes to normal boot.
UPDATE 2: And now it just sits on the black screen with the words: Samsung Galaxy S4 GT-I9505 and tiny blue writing in the top left and doesn't do anything.
philliplavelle said:
Thank you for this. The file I have of the FW was downloaded from the post the first person who answered quoted. On my Mac, it's not a .zip file, it's a folder with a .tar.md5 file and another ssl one or something. Am I not able to flash these? They are not .zip. Apologies if I'm being extremely stupid.
UPDATE: Flashed PhilzCWM - but the phone won't enter recovery mode. It boots up, and the little tiny blue writing at the top implies it is going into recovery mode, but it doesn't. Screen just sits at black and then it vibrates again and goes to normal boot.
UPDATE 2: And now it just sits on the black screen with the words: Samsung Galaxy S4 GT-I9505 and tiny blue writing in the top left and doesn't do anything.
Click to expand...
Click to collapse
Just flash your phone with stock firmware and it is fine. Samsung still repair your phone for a fee. So if anything goes wrong take the phone to Samsung
Thanks for the response but as per the above post, I am unable to even flash anything because I can't get into recovery mode!
To go to recovery mode try two things:
Either press volume up+home and power and hold all 3, you will see the words 'recovery booting' keep all button held down still. Your phone will restart back at that i9505 screen and you'll see the blue words again, keep holding those buttons! You're fingers will be sore but this second time you should boot into recovery mode. Let go of buttons when in recovery
Or wait till you see blue writing the second time and when it appears wait 1 sec then release power button but still hold home ad volume up.
Sent from my GT-I9505 using XDA Premium HD app
Tried mobile Odin from the play store? Then flash stock firmware from sammobile?
philliplavelle said:
Thank you for this. The file I have of the FW was downloaded from the post the first person who answered quoted. On my Mac, it's not a .zip file, it's a folder with a .tar.md5 file and another ssl one or something. Am I not able to flash these? They are not .zip. Apologies if I'm being extremely stupid.
Click to expand...
Click to collapse
Its not a meant to be flashed through recovery.... flash it using odin....donot extract it just flash it
Sent from my GT-I9500 using xda premium
Good day,
I am having problem with my lg optimus l3 e400. I just rooted it the other day to solve the memory problems of the phone. It has been working fine until today. What happened was, it just turned off and whenever i turn it on, it goes directly to cwm recovery, which has been installed during the root process thru ROM manager app. I also found out that the SD card is corrupted. I had to format the SD card and tried pasting stock ROM's but it still doesn't boot and still goes to recoovery everytime I turn it on. I tried to format the device, the cache, and the other format options in recovery mode but the issue is still not solved. Can anyone please help? And if possible, give me a step by step guide because I'm kinda new at this. Thanks.
marioman1 said:
Good day,
I am having problem with my lg optimus l3 e400. I just rooted it the other day to solve the memory problems of the phone. It has been working fine until today. What happened was, it just turned off and whenever i turn it on, it goes directly to cwm recovery, which has been installed during the root process thru ROM manager app. I also found out that the SD card is corrupted. I had to format the SD card and tried pasting stock ROM's but it still doesn't boot and still goes to recoovery everytime I turn it on. I tried to format the device, the cache, and the other format options in recovery mode but the issue is still not solved. Can anyone please help? And if possible, give me a step by step guide because I'm kinda new at this. Thanks.
Click to expand...
Click to collapse
If you highlight the reboot option and then press the power key what happens?Does the phone reboot?If not somethings gone wrong...Anyway try flashing another custom ROM(cyanoid,for example @linuxxx)Does CWM recovery mount the SD card?Did you flash SD merge and you aren't using a SD merge compatible kernel?Anyway you can't flash stock roms from the phone.You must use the good old KDZ(How many times did he save me....)
Sent from my LG-E400 using XDA Free mobile app
Use Lg Support tools - recovery mode to install stock rom
already tried flashing other roms
giaki3003 said:
If you highlight the reboot option and then press the power key what happens?Does the phone reboot?If not somethings gone wrong...Anyway try flashing another custom ROM(cyanoid,for example @linuxxx)Does CWM recovery mount the SD card?Did you flash SD merge and you aren't using a SD merge compatible kernel?Anyway you can't flash stock roms from the phone.You must use the good old KDZ(How many times did he save me....)
Sent from my LG-E400 using XDA Free mobile app
Click to expand...
Click to collapse
Can you guys give me a link? i'm having a hard time looking for stock roms and i don't even know how to distinguish stock rom and custom rom. the sd card that was working before the happened got corrupted but after inserting it to another phone and formatting the sd card, it seems to be working and the sd card can be mounted. i'm not sure with the sd merge compatiility with the kernel but it worked for a few days so i think it is compatible. the phone does not reboot. whenever i reboot it or turn it on, it just goes to recovery mode. thanks.
marioman1 said:
Can you guys give me a link? i'm having a hard time looking for stock roms and i don't even know how to distinguish stock rom and custom rom. the sd card that was working before the happened got corrupted but after inserting it to another phone and formatting the sd card, it seems to be working and the sd card can be mounted. i'm not sure with the sd merge compatiility with the kernel but it worked for a few days so i think it is compatible. the phone does not reboot. whenever i reboot it or turn it on, it just goes to recovery mode. thanks.
Click to expand...
Click to collapse
http://lg-phone-firmware.com/index.php?id_mod=11 this link is for the stock roms.Just download one of them(the best one is v10m)And then flash it thru kdz.I prefer it cause it's more UNOFFICIAL.This is the guide for using KDZ: http://forum.xda-developers.com/showthread.php?t=2582881 Have a nice day!
P.S. You can ignore step 4 since the link i gave you is better
Sent from my LG-E400 using XDA Free mobile app
giaki3003 said:
http://lg-phone-firmware.com/index.php?id_mod=11 this link is for the stock roms.Just download one of them(the best one is v10m)And then flash it thru kdz.I prefer it cause it's more UNOFFICIAL.This is the guide for using KDZ: http://forum.xda-developers.com/showthread.php?t=2582881 Have a nice day!
P.S. You can ignore step 4 since the link i gave you is better
Sent from my LG-E400 using XDA Free mobile app
Click to expand...
Click to collapse
thanks. but i cant download from the stcok rom link you gave me. it's asking me to download different apps that i'm not sure i'll be needing like babylon, bearshare and i dont see a way or a link i can click to skip it if it is an advertisement. thanks
i think i got. let's hope it solves it, thanks a lot.
marioman1 said:
i think i got. let's hope it solves it, thanks a lot.
Click to expand...
Click to collapse
If i helped you there's the thanks button.Anyway the stock roms i gave you are from another thread in the forum.You can try the original step 4 if you can't use mine.Have a nice day,greetz from giaki3003
My phone: Lg-e400 with cyanoid rom #15+cyanoid kernel 0.4(@linuxx)+supercharger v6 (@zeppenlinrox)+crossbreeder (edited zip) (@idcrisis)+swap of 50 mb (System) and 693 mb (sdcard) all this for#abetterl3