Database Users

[Q] flashing cwm recovery

I have flashed skrilax v8 unlocked BL with v8pubA50 recovery
I flashed it using blackthund3r ATX flashtool
My question is
1. Why I can't enter boot recovery, it's just show green robot with exclamation at its body
2. How I can flash cwm recovery since it's extension is .Img
(fyi). I use UNroot A501 with stock HC 3.2.1
Thanks
Sent from my A501 using xda app-developers app

Help help :'(

gigacats said:
Help help :'(
Click to expand...
Click to collapse
IF you are sure you have the v8 bootloader installed, you should be able to install a recovery.
You must have an ICS rom installed, or on the Ext SD card, have an ICS rom ready to flash.
If you currently have a stock ICS rom installed, then you need to be rooted, and delete the "boot recovery" file (or similar name). Or else when you boot your tab, the custom recovery gets overwritten.
You can look at Civato's Bootloader and Recovery guide for the exact name of the file.
Note that v8 bootloader and ICS recoveries, DO NOT work well with HC based roms. You must have an ICS Rom.
MD

I'm on HC 3.2.1 stock ROM and unroot
Here i give some picture
View attachment 1218773
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When i choose boot recovery, that robot will go out and my tab restart after a minute.
Please guide me how to open recovery.img
Sent from my ST25i using xda app-developers app

gigacats said:
I'm on HC 3.2.1 stock ROM and unroot
Here i give some picture
View attachment 1218773
View attachment 1218774
When i choose boot recovery, that robot will go out and my tab restart after a minute.
Please guide me how to open recovery.img
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
1) the robot is the 'stock recovery.img'
2) you must be rooted before you can flash 'anything'
3) The only way to do this (on HC) is by installing a custom pre-rooted rom
4) If you want ICS your tab should update itself, you will need acer enhancement app from the market. then Settings>About Tablet>System Update
5) you can install a stock or custom ICS rom BUT you must have root to update to the patched bootloader which some of the custom roms require.
6) you cannot "open" recovery.img.

Ok, so please stop posting the same issue in other threads, or you will never get your problem solved.
Now. You say you have Skirlax_cz's V8 bootloader installed. Correct? If so, you should be able to boot into the menu system of it (vol+ and PWR). If you get the bootloader menu, good.
Now, you will need the Android SDK (google it and download and install it). After installation, go to c:\windows\program files (x86)\android\android-sdk\platform-tools. Open a command window here. (it may be installed in program files)
Boot your tablet like I described above, and at the bootloader menu, select "fastboot". The tablet should say fastboot mode.
Now, copy your recovery.img (or whatever you named it) into the platform tools folder on your PC. It has to be in the same folder as fastboot.exe
Now, make sure you have the rom you want to install on your EXT SD Card.
Next, plug in your tab to the USB (I always make sure in device manager that the tab is recognized as a fastboot device)
In the command window you opened earlier, type in the following;
fastboot flash recovery recovery.img
Remember, if your recovery image is named "public-recovery.img" for example, that is what you should type in the command above.
Once the recovery is successfully flashed, then turn tab off.
Unplug from USB
Hold PWR and Vol- untill you see the message "booting recovery kernel", then release both. You should boot into the custom recovery now. Then you can do your wipes and stuff as per the rom install instructions.
Of course, this is ONLY if you have the V8 bootloader running.
Also, I posted a better rom. Evil Alex Unleashed, so you should install this. It has problems fixed.
MD

OK MD, thanks for your guide.. now I have installed your ROM successfully, it's running very smooth. Thanks very much and sorry for double posts

gigacats said:
OK MD, thanks for your guide.. now I have installed your ROM successfully, it's running very smooth. Thanks very much and sorry for double posts
Click to expand...
Click to collapse
Wow! It worked!!!!!!!!!!!!
Damn, better than I thought.
Gotta love Skirlax_CZ and putting flashboot in the bootloader v8. Throw a thanks at him when you get the chance please. And if you used EZTerry's public recovery, please throw a thanks at him also. And anybody else who helps you. That's how it works here.
I hope you installed Evil Alex. She's much better than Alex V. Alex V is a good girl, but she need the wakelock app from the market. Evil Alex hopefully does not. After all, these are Acer leaks. AKA "beta". So we really don't know what to expect. And things "will" change in the next month, and new builds "will" be released.
Am glad you got it running.
And Dibbs, throw a thanks to him also His instructions were after all, correct (he didn't know your V8 was working).
Any issues, please put them in my rom thread.
MD

Droid pro CM7 Recovery problem

Hi. I have a strange problem. The rocovery of my Droid pro does not work write ( Verizon US ).

mat_pav said:
Hi. I have a strange problem. The rocovery of my Droid pro does not work write ( Verizon US ). I flashed the CM7 with no problems ( EU kernel and CW backup and then the 6-6.zip ). Everything worked, the phone works great exept a cant use the recovery. It does work but you almost cant read of the screen. Does any one have the same problem?
TNX
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Try to reflash rom , or try my CM7
Sent from my HTC Desire

vanillaLVL said:
Try to reflash rom , or try my CM7
Sent from my HTC Desire
Click to expand...
Click to collapse
Is there any way to flash just the Recovery?

mat_pav said:
Is there any way to flash just the Recovery?
Click to expand...
Click to collapse
Yes , make zip that contains bootmenu.

vanillaLVL said:
Yes , make zip that contains bootmenu.
Click to expand...
Click to collapse
How? Just zip the folder and thats it?

mat_pav said:
How? Just zip the folder and thats it?
Click to expand...
Click to collapse
Search in google how to make flashable zip

vanillaLVL said:
Search in google how to make flashable zip
Click to expand...
Click to collapse
Ok. I decided to flash Your Room instead of 6-6 again. Can you tall me how can i flash the rom without accessing the recovery ( i cant see whats written on it) . Is there any way?

mat_pav said:
Ok. I decided to flash Your Room instead of 6-6 again. Can you tall me how can i flash the rom without accessing the recovery ( i cant see whats written on it) . Is there any way?
Click to expand...
Click to collapse
Download - ROM manager - then select flash zip from sd and select options like this pic

vanillaLVL said:
Download - ROM manager - then select flash zip from sd and select options like this pic
Click to expand...
Click to collapse
Its not working with rom manager. I don't know why but rom manager does not reboot to recovery. I did it the long way installed your rom but the recovery is still corrupted. I installed this way wit EU or US kernel, with and without the radio unlocker the your rom and gaps. After the bootstrap the recovery work ok. Then when fleshing rom ends the recovery is not working right.
Process:
1) Boot to Recovery & Wipe Data (R+M+Power)
2) Boot to Bootloader (Up+Down+Power) & SBF to 2.26 (Using RSD Lite & SBF file) - Usually I have to copy SBF File to root of Hard Drive & name it 2026.sbf or it may fail (ymmv)
3) Skip Activation (Bypass activation on your Android device | Android Central)
4) Settings->Applications, Set Unknown Sources and USB Debugging (in development)
5) Root
6) Install Bootstrap apk, open, press 'bootstrap recover'. then 'reboot recovery' to boot to recovery mode.
7) While in recovery mode, and without rebooting at all:
...a) Wipe Data
...b) Install Radio Unlock
...c) Install Kernel
...d) ROM+ Gapps

Found a partial solution on CM9 threatd. it seems that the stock recovery does not get updated with the new one or the link wit the new one is missing.
IN ORDER TO GET INTO RECOVERY, REBOOT YOUR PHONE, THEN WAIT FOR THE LED TO FLASH BLUE. IF YOU PRESS THE VOLUME DOWN BUTTON WHEN IT'S BLUE THEN IT WILL TAKE YOU INTO THE DEDICATED BOOT MENU. FROM THERE SELECT RECOVERY, THEN CLOCKWORK RECOVERY

my motorola not working now
please please help i tried to flash my motorola droid pro version with Android 2.3.6 ---- Blur_Version.0.22.2.XT610.Personal.en.AR and now i am not able to go back or flash back for 2.26.20.spf please please help my motorola not working now

aymanfoa said:
please please help i tried to flash my motorola droid pro version with Android 2.3.6 ---- Blur_Version.0.22.2.XT610.Personal.en.AR and now i am not able to go back or flash back for 2.26.20.spf please please help my motorola not working now
Click to expand...
Click to collapse
Ok what you want is this program called rsd lite... you need to have that on a 32bit windows computer after getting it what you need to do is get the base drivers from motorola and install them... after that make sure your phone is off... now hold the right side button on your pro and hold the volume buttons and the power button... hold these all at once for 30 seconds then a simple menu should pop up... now open rsd lite on your computer and connect your phone and it should pick it up... now you need to get an sbf file for your pro and browse to it in rsd lite and open it then flash it (it can be a sbf.zip file too)
Sent from my DROID Pro using xda app-developers app

2.3.6 Argentinian problem
i have the same problem please help
RSD lite can't flash. MEM_MAP BLANK, error, etc ...
Only flash Argentinian 2.3.6 HWp3_Service1FF. I wont to stock verizon.

profesbond said:
i have the same problem please help
RSD lite can't flash. MEM_MAP BLANK, error, etc ...
Only flash Argentinian 2.3.6 HWp3_Service1FF. I wont to stock verizon.
Click to expand...
Click to collapse
Here you have stock Verizon sbf file

How to Flash recovery from device

This guide is main purpose for sometimes Stock Recovery overwrites CWM after flashing with Odin. In such case this will be handy. Remember you needs rooted device.
First of all download recovery you needs to flash and extract that zip/tar with 7zip to get recovery.img
OR
Here is Philz recovery (extracted and ready to use) for N7100
Copy recovery.img to Internal SD card
Now follow this
1.Install Terminal emulator
2.Open it, you will get ***@android:/$
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3.Now typebelow said command and enter
Code:
su
it will ask superSU permission, grant it (it will ask only if your superSU setting - default permission is set to 'prompt', if you have set to 'grant' it will not ask)
4.you will have now this
[email protected]:/ # (this # symbol suggest it got root access)
5.Now type below mentioned command (case sensitive) and enter
Code:
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p9
After successful flashing you will get msg like this
Done !
Reboot device and you will have now new recovery.

Reserved

I followed this method exactly but it still goes to stock recovery. I used this as a last option since the other methods in your All in One thread for root w/ custom recovery failed. I've sent you a PM. Thanks so much. ~m00n

Replied
Sent from my GT-N7100 using xda premium

Thanks dr...

I have twrp recovery...will this method work if I want to flash philz recovery using emulator
Sent from my GT-N7100 using Tapatalk 2

Yeah you can flash any recovery that supports note2, it should be in img format
Sent from my GT-N7100 using xda premium

Is it possible to flash any cwm zip file with terminal amulator? If so then please provide method.
Sent from my GT-N7100 using Tapatalk 4 Beta

MBariya said:
Is it possible to flash any cwm zip file with terminal amulator? If so then please provide method.
Sent from my GT-N7100 using Tapatalk 4 Beta
Click to expand...
Click to collapse
It's possible but y u wanna do that? Some cwm zip requires the system to read the fstab, which some cases only exists in recovery.

Ok. Got it. So it is advisable to flash only in CWM recovery.
Sent from my GT-N7100 using Tapatalk 4 Beta

For me also that I followed this method exactly but it still goes to stock recovery.
Who can help me?

Rero said:
For me also that I followed this method exactly but it still goes to stock recovery.
Click to expand...
Click to collapse
I installed TWRP by following this instruction from "HighonAndroid":
Download and open Goo Manager app from Play Store. Hit Menu button and select “Install OpenRecoveryScript”.

Hi, Dr Ketan! I know that is not the correct thread. Sorry for that. I am a newbie and I have studied many threads. Can I use the terminal emulator the same command to N9005? I think to update my CWM version phone to new version CWM when It stays more stable. Congratulations for your great job! Sorry for my english
Sent from my SM-N9005 using xda app-developers app

seowphm said:
I installed TWRP by following this instruction from "HighonAndroid":
Download and open Goo Manager app from Play Store. Hit Menu button and select “Install OpenRecoveryScript”.
Click to expand...
Click to collapse
I think I'll try that method.
2 days ago I make a true mess with phone finishing stuck to "Samsung...." logo. I had got Root, and I had tried to flash the philz .tar through Mobile Odin to get damned recovery....... Too "clever"!
Things were solved with re-flashing the Rom through Odin, but no Root & no Custom recovery yet.
EDIT: No success. Have yet stock recovery

I;ve had a problem with method 2 and via terminal. I couldn't get to recovery. My solution is to flash via Odin 3.09 and then press VOL+, Home and Power buttons.
It is a little confusing in method 2 that you enter recovery by holding power button. I couldn't enter it even now that I have custom recovery from Philz

Rero said:
For me also that I followed this method exactly but it still goes to stock recovery.
Who can help me?
Click to expand...
Click to collapse
same here..

thank you

works !!
thank you dr

Micromax Canvas Knight A350 Stock ROM OFFICIAL KITKAT

Thread Removed

>-MKG-< said:
Here is the Micromax Canvas Knight A350 Official Stock Firmware/Rom KITKAT :
LINK : https://drive.google.com/uc?id=0B9cSshs70JG0bjRyTWVCRU5LZ00
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Key Features
OS : Android Jelly bean 4.4.2
Screen Size : 12.7cms(5)
Camera Resolution : 16 MP AF (3456*4608) REAR, 8 MP(2448*3264) FF Front
Chip set : MT6592T
Processor : 2GHz Octacore
Battery Capacity : 2350mAh
Connectivity Options : Bluetooth 4.0/USB/Wi-Fi
Drivers:
https://www.adrive.com/public/uVCr85/Mobistel_Cynus_T1_Drivers_x86.exe
X64 Drivers : https://www.adrive.com/public/5mMCQJ/Micromax_A350_Drivers_x64.exe
https://www.adrive.com/public/TWKhBN/driver9401.rar
How to Flash :?
You can use https://www.adrive.com/public/tyrfC7/SP_Flash_Tool_v5.1348.00.rar
A. Install USB driver
B. Switch off the mobile.
The maximum downloading speed can be up to 921600bit/s when using USB-Serial cable.
The driver needs to be installed before using the USB cable.
1. computer eject hardware installation instruction and choose following item and then click’’next step’’.
2. click ‘’browser’’ and choose the driver saved path’’ USB VCOM-Driver’’ and then click confirm and next step".
Choose usb driver
3. USB driver is now installing.
4. Open software upgrading platform’’ SP_Flash_Tool_v5.1343.01
5. Click” Download Agent”，choose right MTK*ALLInOne*DA.bin file
6. Click Scatter/loading. Choose right MTXXXX_Android_scatter.txt file.
7. Click Download then connect the smartphone（keep close），would show yellow color processing bar. Eventually, show “download ok”. Upgrade finished.
Here is a Tutorial on how to use SP Flash Tool by DR_MOOSAVI : http://forum.xda-developers.com/show....php?t=1982587
And as always :
Use this at Your own Peril. I will not take any responsibility on whatever may happen with your Canvas Knight.
Click to expand...
Click to collapse
Why are you making a simple looking process too hard.
The simple process is to....
1.) Install the drivers. (make sure you keep your phone disconnected while installing from executable file)
2.) Start SP Flash tool and locate the scatter file. (Do not connect phone.)
3.) Select download only in droop down and click download. (Do not connect phone.)
4.) Switch off your phone. Make sure you switch it off completely as it will vibrate strongly when it will go off. (Do not connect phone.)
5.) Now finally it is the time to connect your phone. Connect you phone now
6.) You will see the process starting to download the flash to the phone.
7.) Wait for the process to finish and then start your phone.
Note: This process works best with x86 versions of windows as the drivers for the x64 versions do not detect this phone.
If possible use the tutorial on Windows 7 x86 only.
I have tested the kikat rom on this phone.
The only benefit of the rom was that it improved the camera quality. But this rom made the phone very slow. On 4.2.2 the Antutu score was 32520 while on Kikat the same score felt down to 23252.
The UI was very slow to use. So i switched back to 4.2.2 Stock.

Canvas Knight Kitkat CWM Recovery TWRP Recovery
Root in kitkat
Download links
1.) Recovery Image CWM
https://dl.dropboxusercontent.com/u/45270941/A350/recovery.img
2.) Recovery Image TWRP
http://goo.gl/K8Qcua
3.) Kitkat Rom download
http://goo.gl/Cp5zqR
4.) SP Flash Tool
https://dl.dropboxusercontent.com/u/45270941/A350/SP_Flash_Tool_v5.1348.00.rar
See the video to Update the Kitkat on your Knight. After that Go To CWM recovery and flash the Super SU zip and the phone will be rooted.
Press all three button all together to go to the Recovery mode and then press Volume UP+ to get the recovery.
5.) Super SU Zip download Link
http://goo.gl/lDKVFm
Enjoy the video and Reply back for more support or any problem.

Many thanks dear!!!!
rakesh.aggarwal said:
Canvas Knight Kitkat CWM Recovery TWRP Recovery
Root in kitkat
Download links
1.) Recovery Image CWM
https://dl.dropboxusercontent.com/u/45270941/A350/recovery.img
2.) Recovery Image TWRP
http://goo.gl/K8Qcua
3.) Kitkat Rom download
http://goo.gl/Cp5zqR
4.) SP Flash Tool
https://dl.dropboxusercontent.com/u/45270941/A350/SP_Flash_Tool_v5.1348.00.rar
See the video to Update the Kitkat on your Knight. After that Go To CWM recovery and flash the Super SU zip and the phone will be rooted.
Press all three button all together to go to the Recovery mode and then press Volume UP+ to get the recovery.
5.) Super SU Zip download Link
http://goo.gl/lDKVFm
Enjoy the video and Reply back for more support or any problem.
Click to expand...
Click to collapse
Many many thanks for the new updates!!!!

Please Hit thanks button if you like my stuff
Sent from my Micromax A350 using XDA Free mobile app

Please hit thanks as this motivate us to discover more
Sent from my Micromax A350 using XDA Free mobile app

Praful Pradhan said:
Many many thanks for the new updates!!!!
Click to expand...
Click to collapse
Thanks for watching
Sent from my Micromax A350 using XDA Premium HD app

MIUI Jelly Bean for Knight A350
Guys there is a Good News for everyone that the MIUI has been ported for Canvas Knight A350 and this is working fine with my phone.
http://tinyurl.com/MIUI4Knight
Procedure:
1. Make sure you have Jellybean Installed on the device. If not then install the JB on the device.
2. If you have installed JB just now then start the device and go through the setup.
3. Make sure you have CWM based recovery. If you do then go to the CWM recovery and
i. Wipe Cache​ii. Wipe Dalvik Cache​iii. Wipe DATA/Factory Reset​4. Flash the MIUI rom and then restart the phone.
If you have Any problems then please reply here on the thread. I am using the MIUI for a long time on Knight and I am very happy from the results. I will be more then happy to help you if you find any problems.
Hit Thanks if you find this helpful.

[RECOVERY][PORT][CTRv3/v3.3][CWM*Tv1.0] CARLIV TOUCH RECOVERY FOR WIKO RAINBOW

DISCLAIMER:
Rooting your phone and using custom Recoveries and ROM's have risks and may result in bricking your device, and has nothing to do with Google or the device manufacturers. In case of any mishap I am not responsible if you brick/ruin your phone in any way.
Basic computer skills are required and minimal knowledge about the phone and phone utilities also.
Make sure that whatever you do, you are doing it at your own responsibility.
NOTE: I Moved This Thread Here Because I Realized That In The Past Location of This Thread Is Not An Approapriate Place To Discuss This.
REMINDER!!!
THIS THREAD IS INTENDED TO WIKO RAINBOW USERS ONLY!!!
FOR THOSE WHO ARE NOT WIKO RAINBOW USERS, DO NOT TRY FLASHING THIS RECOVERY TO YOUR PHONE BECAUSE IT WASN'T MEANT FOR YOUR DEVICE!!!
IF YOU WANT TO PORT THIS RECOVERY TO YOUR DEVICE GO
->HERE - @carliv's main thread for ctr recovery
->HERE - @carliv's porting guide
Don't forget to give thanks to him!
It is a CWM based recovery and is compatible with any other CWM based recovery. It works with KITKAT kernels. In this version I used Napstar-xda's full touch module as base. The navigation it is posible by touching the menu item. In long display menu (as choose zip from sdcard) for scroll page down Swipe Right and for scroll page up Swipe Left. For Go Back also Swipe Left.
If the Swipe doesn't work (usually if your phone is multitouch but has only 2 points of touch), use bottom virtual navigation keys or volume buttons Down for Scroll down, Up for Scroll up, and the back button for Go Back.
Version 3.3 update (21-apr-2015):
This is the last batch of builds for porting. I won't do that anymore.
- many fixes in code;
- cleaned up the source code;
- reset battery stats option;
- wipe all - preflash option;
- removed nvram backup/restore because it can corrupt the bootloader;
-full track of changes here.
Click to expand...
Click to collapse
INSTRUCTON FOR INSTALLING IT!
OPTION 1:
Use MobileuncleTool or Rasher (Both of them can be downloaded at Google Play Store so do not bother asking for the link of this two apk's)
In MobileUncleTool:
1. Rename the "CTR_Recovery_v3.3_wiko_rainbow.img" into "recovery.img".
2. Put recovery.img in the root of your sdcard (/sdcard/recovery.img).
3. In the tool just go to recovery update then you wil automatically see the recovery.img then flash it and wait until it finished.
4. Reboot to recovery.
In Rasher:
1. Its ok if it is not renamed or in the sdcard root, just simply select recovery then locate the recovery image file and flash it.
2. Reboot to recovery.
OPTION 2:
Via SmartPhoneFlashTool(SPFT)
1. Locate MT6582_Android_scatter.txt
2. Only Tick the RECOVERY then locate the recovery image.
3. Press Download and wait till flashing finished.
4. Reboot to recovery.
SELECT VERSION OF CTR YOU WANT TO FLASH:
1. CTR RECOVERY V3
2. CTR RECOVERY V3.3
3. Carliv CWM*T Recovery v1.0 (On-going still asking permission to @carliv for porting it but as of now I was able to boot into it but the only problem is the sdcard0 path are not mounted and also the Advance Menu are not working)
To get aroma file manager to work you need to flash the zip below. -> HERE
Credits to:
-Sir @carliv for the porting guide, tools and to his helpful threads.
-Also @Kyzrael (ME) for porting this two recovery. The ctr v3 and ctr v3.3
( Hit Thanks to this thread if you find it helpful )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADD ONS: If you used this recovery and you find some problem with it don't hesitate to approach me so that I can pinpoint the problem or reprocess the whole porting process to fix the issues that you may find. Remember, I spent two days just to finish this two ctr to port and make it work to our device.
-Other Clone Phones Related to Wiko Rainbow was also get it working if you flashed Wiko Rainbow v13 firmware.
-Btw, I am using MyPhone Agua Rio and I was able to get it work because I am using Wiko Rainbow v13 firmware.