[Q] Verizon G2 Bricked Without Recovery, Stuck in Fastboot Mode? - G2 Q&A, Help & Troubleshooting

Hey guys,
The inevitable has happened: I've finally bricked a device that I can't seem to find the solution to online. Here's what happened:
1. When I got the phone a little over a week ago, I accidentally "broke" the recovery by trying to install CWM through Rom Manager. Turns out that's not something you generally want to do. Oops.
2. I got lazy and put off restoring the stock recovery, instead choosing to deal with the stock launcher.
3. Today, while dealing with the 50th pop-up for the OTA update, I accidentally pressed "Install Now" instead of "Install Later"
Now, when it boots, it briefly shows the LG logo before displaying an all-black screen with small white text reading:
[730] Fastboot mode started
[780] udc_start()
I get a little bit more text when I plug it into my PC. I've been trying to fix it for the past three hours - I've tried countless solutions, but nothing seems to work.
Can anyone out there give me some advice? I'd greatly appreciate it.

Have you tried to use the lg flash tool?

tbishop91 said:
Have you tried to use the lg flash tool?
Click to expand...
Click to collapse
When I opened the Flash tool, it prompted me for a Username and Password, something I didn't have.

techee44 said:
When I opened the Flash tool, it prompted me for a Username and Password, something I didn't have.
Click to expand...
Click to collapse
there's a dll you have to download an replace the one that was installed, it should be on that same thread, but it takes away the username and password

datechnerd said:
there's a dll you have to download an replace the one that was installed, it should be on that same thread, but it takes away the username and password
Click to expand...
Click to collapse
Will this work even though I don't have a recovery? The instructions I found (these: http://forum.xda-developers.com/showthread.php?t=2448960 ) definitely sound as though they were created with a working phone, and some of the instructions linked still imply they have TWRP.
Thanks for any help, I really appreciate it. I feel like I can get this working, it's just going to take some time (something I don't have a lot of, as I'll be camping all weekend).

techee44 said:
Will this work even though I don't have a recovery? The instructions I found (these: http://forum.xda-developers.com/showthread.php?t=2448960 ) definitely sound as though they were created with a working phone, and some of the instructions linked still imply they have TWRP.
Thanks for any help, I really appreciate it. I feel like I can get this working, it's just going to take some time (something I don't have a lot of, as I'll be camping all weekend).
Click to expand...
Click to collapse
yes...

antawnm26 said:
yes...
Click to expand...
Click to collapse
Lol such a simple answer.
Alright I'm trying it. Will report back with results in case I need more help. Thanks everyone

techee44 said:
Lol such a simple answer.
Alright I'm trying it. Will report back with results in case I need more help. Thanks everyone
Click to expand...
Click to collapse
Lol.. Make sure you get that dll that was mentioned earlier because that's your crack to make the tool work.. If you get a fail but your phone boots up and go through settings don't worry about it it's good.. I know a lot of people were having the fail reset error
Sent from my LG-D802 using Tapatalk

antawnm26 said:
Lol.. Make sure you get that dll that was mentioned earlier because that's your crack to make the tool work.. If you get a fail but your phone boots up and go through settings don't worry about it it's good.. I know a lot of people were having the fail reset error
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
So... I followed the guide I posted earlier. It talks about entering download mode, which I'm not able to do, and my phone isn't seen in Device Manager as "LGE AndroidNet for VZW..." (Oddly, it's seen as a "SAMSUNG Android Phone," and under that is "USB Modem Phone ADB port").
When I unplugged and replugged the phone back in, trying to enter download mode even though I haven't been successful with that, nothing happened. LG Flash says it's ready, but nothing activated.
Help??

When it says it's ready unplug it while in download mode and plug it back in.. Make sure you have the ports set right
Sent from my LG-D802 using Tapatalk

antawnm26 said:
When it says it's ready unplug it while in download mode and plug it back in.. Make sure you have the ports set right
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
But I can't enter download mode. If I power off the phone it just brings me straight back to Fastboot.

techee44 said:
But I can't enter download mode. If I power off the phone it just brings me straight back to Fastboot.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2524482

antawnm26 said:
http://forum.xda-developers.com/showthread.php?t=2524482
Click to expand...
Click to collapse
After 6+ hours of work, I finally have my phone up and running again. Thank you so, so much antawnm. You're awesome for helping me through this. Though that link provided wasn't perfect (it was for the Korean model) it provided me with enough clues to combine it with everything else you sent me and some files I found in a directory (especially the recovery.img file for the VZW LG G2) to get back right to where I was.
The funniest part was, after the phone rebooted itself and I got back to my home screen, the phone informed me that my software update was unsuccessful. I genuinely laughed.
Thanks again.

Related

Well crap...I think I bricked it :-(

I tried to unroot my phone via OCLF from the market. It went dark, then got the normal Vibrant screen, the the Galaxy S screen, then it went dark again. Now, it just sits. Black screen. All the buttons at the bottom are lit up. :-/
Anyone?
Silly question, I know. But did you have a nandroid backup, by any chance?
This is probably a last resort, but try boot into recovery and wipe everything. This fix the problem for me, the downside is you lose all you data.
Sent from my SGH-T959 using XDA App
If you are anything like me, recovery didn't work and using Odin and reflashing Stock with repartition didn't work either.
You'll need to use odin to flash Eugenes "Vibrant that doesn't brick" (NO REPARTITION), then use odin again to flash Stock (check repartition this time) and you'll be good to go.
You can try to flash the froyo rom with odin...... I had that same exact problem and this is what fixed it for me. Once froyo us flashed then you can flash whatever rom you want. Hth
Ok, I probably should have stated that I'm a complete newby and have no idea what I'm doing. I believe I do have nandroid, but other than that you all are speaking French to me.
Right now I'm in the recover mode (I think). It's hooked up to my computer and I'm in the "Downloading... Do not turn off target!!" mode. This is where I'm stuck...I have no idea where to go from here.
Please talk to me like I'm a 5 year old, because as far as this is concerned, I am!
Oh, and thank you so much for any help you can give me!
hospo said:
Ok, I probably should have stated that I'm a complete newby and have no idea what I'm doing. I believe I do have nandroid, but other than that you all are speaking French to me.
Right now I'm in the recover mode (I think). It's hooked up to my computer and I'm in the "Downloading... Do not turn off target!!" mode. This is where I'm stuck...I have no idea where to go from here.
Please talk to me like I'm a 5 year old, because as far as this is concerned, I am!
Oh, and thank you so much for any help you can give me!
Click to expand...
Click to collapse
Well, good news is... you didn't brick your phone, this is recoverable. Best idea would be to search the forums on how to ODIN back to Stock. Theres plenty of posts on how to do it. You should also be able to find this in the tips & tricks threads. Good Luck.
Thank you all for your help! I recovered it!! Seems as though I was just going about it the wrong way!! I got into the actual recovery mode and cleared it all out. Now it's as good as new!
Again, appreciate your help and patience with what I'm sure is the 120,000th post on this subject. ;-)
Kienz said:
Silly question, I know. But did you have a nandroid backup, by any chance?
Click to expand...
Click to collapse
Is it even possible to make a nandroid backup before rooting?
hospo said:
Thank you all for your help! I recovered it!! Seems as though I was just going about it the wrong way!! I got into the actual recovery mode and cleared it all out. Now it's as good as new!
Again, appreciate your help and patience with what I'm sure is the 120,000th post on this subject. ;-)
Click to expand...
Click to collapse
Hey - what does you doing? Please told me, I've the same problem:
If I start the phone with an USB cable and the battery symbol with the running point under this, the PC recognize that something is connected, but Windows found no driver....
How could you could flash the Stackfirmware back, if the recovery and download menu does not work ?
PLS help !!!
Check out this thread http://forum.xda-developers.com/newreply.php?do=newreply&p=8129898
Go to the section where it says "Did You Flash Something Before Disabling Voodoo? 2 Fixes to Help You Out."
And do fix #1 it is pretty easy and it wont take you more than 20 minutes.
Let us know if that works
And do fix #1 it is pretty easy and it wont take you more than 20 minutes.
Let us know if that works
Click to expand...
Click to collapse
If I following the link and the next one, I can read:
Caution!!! You Must be on STOCK Vibrant Rom & NEVER Have Already Flashed the JP3 Froyo Image
Click to expand...
Click to collapse
It isn't -> it's a Firmware for the normal Galaxy (3key)[I'm a idiot]
First,
You must already Have Odin installed & Know how to boot into Down-loader Mode!!
Click to expand...
Click to collapse
Thats also the problem as described in front : I have had no chance to received the DL Mode.. maybe I make something wrong? The phone is booting up till the "S" is there, after that, the screen is black, keys are lightning...
The recovery 3button are blocked from the beginning; the DL Menu - I did not have reached it successfully
The PC recognize, that is something on USB, but not what ... so Odin did not see the Mobile, too.

Help!! Phone is Frozen....

Ok. So I just got this phone. I had the iPhone before and Im pretty tech savy. I honestly have no idea about this phone. I rooted it and today I received the Tmobile GPS update. Of course silly me updated it. Now its hung on the opening Vibrant screen. I deleted all data thinking it might restore it completely. That didnt work. So now my phone wont work and I have no clue how to fix it. HELP PLZ!
First of all can you access download mode or recovery? Try pressing both volume buttons and power. And let me know what happens.
Sent from my SGH-T959 using XDA App
Yea i can access all that. It gives me the "reboot system now" and all the other choices.
So reflash stock thru odin
namansell said:
So reflash stock thru odin
Click to expand...
Click to collapse
Im trying to do that now.
Not sure how long it takes. Its on "File Analysis"
How long does it normally stay on that?
It appears your phone is Soft-Bricked. You may need to use ODIN to go back to stock
Stephie Baby said:
Yea i can access all that. It gives me the "reboot system now" and all the other choices.
Click to expand...
Click to collapse
Went over this myself. I am pretty sure this is the same scenario. I followed these instructions.
http://forum.xda-developers.com/showthread.php?t=799105
Verify your drivers
Stephie Baby said:
Im trying to do that now.
Not sure how long it takes. Its on "File Analysis"
How long does it normally stay on that?
Click to expand...
Click to collapse
Sorry, took too long replying, i see you already almost there. If it stays too long at the File Analysis phase then there is probably not communication between your PC and your Phone. Make sure your PC detects your phone and that ODIN shows a port number when your phone is connected. (Any port # will do it) Check your drivers. Also if running Windows 7 Vista, try running ODIN as administrator.
The link to get all the files I need isnt working. GRRR!! This is a pain! Lol.
Stephie Baby said:
Im trying to do that now.
Not sure how long it takes. Its on "File Analysis"
How long does it normally stay on that?
Click to expand...
Click to collapse
Not long usually.
It sounds like you are in recovery mode vice download mode my friend. Try this:
First make sure you have all the correct drivers for the phone loaded onto your system.
-Close and reopen Odin.
-Unplug the USB cable and remove the battery.
-Reinsert the battery into the phone.
-Hold down both vol down + vol up and plug in the usb cable (make sure it's plugged into your computer first).
This should get you to a yellow screen that has a andriod sweeping, with "Download Mode" displayed at the bottom.
When you look in Odin you should see a little yellow box with a com port number in the upper left. This means the computer and Odin have found the phone, and that it is now ready for flashing.
Select the stock JFD firware for the PDA option, and the correct 512.pit file for PIT.
Try flashing again. Hopefully you get a bit further this time!
YAY!! It worked!! Ok. Thanks for the help.
Oh should I install the Tmobile GPS fix and root it again? Or will it get stuck again?
Stephie Baby said:
YAY!! It worked!! Ok. Thanks for the help.
Oh should I install the Tmobile GPS fix and root it again? Or will it get stuck again?
Click to expand...
Click to collapse
It's better for all of us to wait for Froyo !
Stephie Baby said:
YAY!! It worked!! Ok. Thanks for the help.
Oh should I install the Tmobile GPS fix and root it again? Or will it get stuck again?
Click to expand...
Click to collapse
No! heh....download Kies Mini (there's a thread in here...like pg 1 or 2) install JI6 from there. It's the official release instead of OTA from T-Mobile.
~SB
edit: Here it is...

Unlocking Vibrant

Hi there,
I am pretty new with this stuff, as I just got this phone today. It came with Froyo2.2 so I unrooted it back to the original JFK.
It did not come with a sim card, so I do not have a sim inside the phone as of now. But I do have a bell sim that I will use after to put the unlock key in... Is that okay?
I Connected the vibrant through Mini Kies and the MTP application says its connected.
I just re rooted from J16 back to the original.
I have the 64 bit drivers installed.
When I try to run Generate Unlock Windows Script I get the following error message saying...
Copy nv_data.bin
*daemon not running. Starting it now *
*daemon started succesfully *
error: device not found
error unable to find file <.\nv_data.bin>
could not find C:\documents and settings\1\desktop\key\generateunlockwindows\nv_data.bin
Anyone know what this means?
Or know what to do in this situation?
I am not sure if I should try installing the 32bit drivers or what.
how did you downgrade the phone from android 2.2?
I just bought the phone through ebay with the OS already at 2.2, and the phone is locked to t-mobile. I've heard it is not possible to unlock it with the 2.2 update. Is that true?
molson24 said:
Hi there,
I am pretty new with this stuff, as I just got this phone today. It came with Froyo2.2 so I unrooted it back to the original JFK.
It did not come with a sim card, so I do not have a sim inside the phone as of now. But I do have a bell sim that I will use after to put the unlock key in... Is that okay?
I Connected the vibrant through Mini Kies and the MTP application says its connected.
I just re rooted from J16 back to the original.
I have the 64 bit drivers installed.
When I try to run Generate Unlock Windows Script I get the following error message saying...
Copy nv_data.bin
*daemon not running. Starting it now *
*daemon started succesfully *
error: device not found
error unable to find file <.\nv_data.bin>
could not find C:\documents and settings\1\desktop\key\generateunlockwindows\nv_data.bin
Anyone know what this means?
Or know what to do in this situation?
I am not sure if I should try installing the 32bit drivers or what.
Click to expand...
Click to collapse
Yup, having exact same problem. If you find a fix let me know.
Make sure your usb setting is on debug and you have all of the files for the unlock on your pc. You also need java installed.
That method worked for me from stock.
can someone answer my question?
mbison83 said:
how did you downgrade the phone from android 2.2?
I just bought the phone through ebay with the OS already at 2.2, and the phone is locked to t-mobile. I've heard it is not possible to unlock it with the 2.2 update. Is that true?
Click to expand...
Click to collapse
I don't know whether the unlock methods work with Froyo but you can download a 2.1 stock Odin in the forum.
pvspencer22 said:
I don't know whether the unlock methods work with Froyo but you can download a 2.1 stock Odin in the forum.
Click to expand...
Click to collapse
where can i get it at and how do i do the rollback?
mbison83 said:
can someone answer my question?
Click to expand...
Click to collapse
...... please?
koooba said:
...... please?
Click to expand...
Click to collapse
very funny.
mbison83 said:
very funny.
Click to expand...
Click to collapse
Wasn't meant to be. Usually please and thanks goes a long way when asking for something. Shows appreciation.
^ Hence the THANKS button.
koooba said:
Wasn't meant to be. Usually please and thanks goes a long way when asking for something. Shows appreciation.
Click to expand...
Click to collapse
it also shows sarcasm and in this case thats what is seems like.
Read the stickies in the forum. If you can't figure it out ill grab the links tonight.
For the unlock this worked for me.
pvspencer22 said:
The windows tool worked for me from stock.
It doesn't generate a code though you input one.
Edit: link
http://forum.xda-developers.com/showthread.php?t=822008&page=11
Scroll down for instructions.
Click to expand...
Click to collapse
For going to stock. (From the general stickie)
draikz said:
Fixing so-called "Bricks"/Odin Errors
This guide is open to contribution/editing/correcting
-----------------------------------------------------------------------------------------------------
BOOT CYCLE
This is where you get the annoying Samsung Screen/Galaxy S screen.
DOWNLOAD REQUIRED (CREDITS TO JUSTANOTHERCROWD):
1. Get into Download Mode (WITH THE PHONE PLUGGED IN) by following the steps below
*Turn off the phone until you get to the charging battery screen (keep in mind, your phone is currently PLUGGED IN)
*Press volume up and down, and power all at once.
*As soon as the screen turns black, release your power button.
2. Unplug phone from USB
3. Open Odin (in Administrator if you're running W7 or Vista), try one of the ones I attached to this post, at least one of them is bound to work, some don't work for me, but works for others, some doesn't work for others, but works for me, whatever floats your boat
4. Load in the files into Odin that you have downloaded from above Just load in the files corresponding to the text field.
DO NOT CHECK REPARTITION.
5. Plug in your phone with the DL mode
6. Click start and wait for the magic
-----------------------------------------------------------------------------------------------------
NO-BOOT PHONES
This is where your phone does NOT turn on, no combo of buttons works and power button does nothing.
DO THIS ONLY WHEN YOU PLUG IN YOUR PHONE AND NOTHING SHOWS UP ON THE SCREEN!!! If else, follow the steps from above.
This method is basically same as above, EXCEPT the way you get into Download Mode as your phone is HARD BROKEN.
1. Download all the files required in the "BOOT CYCLE" section of this post.
2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery, as you have already taken it out in the last step.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Unplug phone from USB
8. Follow steps 4-8 from the "BOOT CYCLE" section.
Troubleshooting:
-Odin stuck at some random process?
*Switch to another odin
*Make sure you did NOT check repartition, if you did, just repeat all the steps over again, except for the downloading parts, obviously.
-Phone not responsive?
*Try "NO-BOOT PHONES"section of this guide
-Phone stuck at Galaxy S logo screen?
*Put it in to DL mode, and run Odin again, it's just a bad install.
-All three ODIN is nonfunctional, stuck or giving "FAILED" errors?
*DO NOT CLOSE ODIN ONCE IT HAS FAILED!
*Unplug your phone
*Replug in your phone, get it into DL mode
* Unplug once it is in DL mode
*Replug and ODIN should recognize your phone
*Leave all the settings the same, then click "Start" again.
-Cannot get into download mode using the method I listed? Use the method(s) below:
Soldering Method
More methods coming soon
-----------------------------------------------------------------------------------------------------
I know how much of a pain posting in the Q/A section can be and the wait time is pretty bad, so if you need help regarding UNBRICKING and ONLY UNBRICKING feel free to post in here.[/S​
Click to expand...
Click to collapse
I unlocked my phone w Galaxy_S unlock 2 days ago. It's in the market and I was running Bionix V when I did it.
draikz said:
^ Hence the THANKS button.
Click to expand...
Click to collapse
Pretty soon we'll have apps that'll say hi and thanks and apps in general will replace everything we say, so much for what our parents taught us huh?
koooba said:
Pretty soon we'll have apps that'll say hi and thanks and apps in general will replace everything we say, so much for what our parents taught us huh?
Click to expand...
Click to collapse
Technology > your parents.
Anyday.
Do you know any other way i could unlock my samsung vibriant .nothing on this site has worked for me,,,who do i pay get files to work on this site please help poor black boy
franjess said:
Do you know any other way i could unlock my samsung vibriant .nothing on this site has worked for me,,,who do i pay get files to work on this site please help poor black boy
Click to expand...
Click to collapse
Poor with a few hundred dollars worth of phone. Lol
Did you try the PRO SGS app?
franjess said:
Do you know any other way i could unlock my samsung vibriant .nothing on this site has worked for me,,,who do i pay get files to work on this site please help poor black boy
Click to expand...
Click to collapse
If you want help you are going to have to be a lot more specific. What have you actually tried?
Just a tip, people will not help you on these forums if you ask for help without showing you've tried to solve the problem and know how to search.
There are loads of unlock threads. Almost everyone get one method to work eventually.

[Q] Can't get into Download Mode after Odin Flash

First off - i've searched all day & stayed in IRC for over 40 mins without a hit so i'm looking for a little help.
I was upgrading to Froyo from a "stock" Continuum today using Odin. Everything seemed smooth - got a pass message & unplugged the usb cable. Now nothing (won't power up, etc) & i can't get into download mode.
I've tried all of the button/cable/battery combos that i could find. I have tried to flash a recovery using Odin & it gets stuck with the message "setup connection" in the message box.
I know my pc is seeing the phone (though you can't access the SD card or memory) & Odin is seeing it (yellow box) but i can't seem to get past this point or go back to the original.
Any help is appreciated.
mountainmanscg said:
First off - i've searched all day & stayed in IRC for over 40 mins without a hit so i'm looking for a little help.
I was upgrading to Froyo from a "stock" Continuum today using Odin. Everything seemed smooth - got a pass message & unplugged the usb cable. Now nothing (won't power up, etc) & i can't get into download mode.
I've tried all of the button/cable/battery combos that i could find. I have tried to flash a recovery using Odin & it gets stuck with the message "setup connection" in the message box.
I know my pc is seeing the phone (though you can't access the SD card or memory) & Odin is seeing it (yellow box) but i can't seem to get past this point or go back to the original.
Any help is appreciated.
Click to expand...
Click to collapse
Try pulling your battery and holding down the power button for a slow count of 20 to see if download mode comes back. After that, you should be good to flash stock ec07 and then recovery kernel. After that, whichever rom you choose. If that doesn't work, I'll try to get into IRC at some point tomorrow (today).
That didn't work either - screen is still blank & it won't progress in Odin. I'll jump back into IRC if anyone has any other ideas - thanks.
i dont know what to tell you continuums are very hard to brick and if u cant get into download mode then theres not that much u can do im afraid I was talking to adam outler about trying the unbrickable mod on a continuum but he does not have one to test. now he got the fascinate to work so id pm him and see if he'll let you send your phone to him
Hey TXwolf - i had to run out for a while - saw where you got on IRC earlier. Verizon is sending me a new phone, so i guess i'll just give up on saving this one...
mountainmanscg said:
Hey TXwolf - i had to run out for a while - saw where you got on IRC earlier. Verizon is sending me a new phone, so i guess i'll just give up on saving this one...
Click to expand...
Click to collapse
I'll be in irc in a few if ya wanna give it another shot
I too manged to brick my phone to point to where I can not even get to the download screen. I have the same problem as OP, Odin will not move past SetupConnection when trying to recover following this post.
androidforums.com/continuum-all-things-root/457453-oh-crap-i-screwed-my-phone-up-recovery-guide.html
Any further help would much appreciated seeing as how I am past my warranty period and do not really want to buy a new phone.
PapaKaster said:
I too manged to brick my phone to point to where I can not even get to the download screen. I have the same problem as OP, Odin will not move past SetupConnection when trying to recover following this post.
androidforums.com/continuum-all-things-root/457453-oh-crap-i-screwed-my-phone-up-recovery-guide.html
Any further help would much appreciated seeing as how I am past my warranty period and do not really want to buy a new phone.
Click to expand...
Click to collapse
If this is frenzifun, from android forums, this is what happened to him
He started a flash of stock ec07 with pit and repartition checked. It flashed params.ifs, boot, SBL and recovery. Then it removed itself (frenzifun, if you could post the flash log for others it might help them) from there, it wont go into dl mode. I was trying to help him in irc, but I'm out of options, other than making a jig. The only thing I can think of, that's causing this is the somehow the button mappings for vol down got erased. I'm not sure how it would, though. Especially since it should be a hardware mapping, independent of any software. And if that is the case, I don't know how to fix it.
If this isn't frenzifun, disregard everything I just said.
Txwolf1980 said:
If this is frenzifun, from android forums, this is what happened to him
He started a flash of stock ec07 with pit and repartition checked. It flashed params.ifs, boot, SBL and recovery. Then it removed itself (frenzifun, if you could post the flash log for others it might help them) from there, it wont go into dl mode. I was trying to help him in irc, but I'm out of options, other than making a jig. The only thing I can think of, that's causing this is the somehow the button mappings for vol down got erased. I'm not sure how it would, though. Especially since it should be a hardware mapping, independent of any software. And if that is the case, I don't know how to fix it.
If this isn't frenzifun, disregard everything I just said.
Click to expand...
Click to collapse
I am not sure who frenzifun is but this still doesn't sound good for my situation. What I can tell you is I was following directions to try an update my phone from 2.1 to 2.2 using Odin. I believed the process was completed, not realizing it was not and unplugged my phone from the computer. From that point on I have not been able to turn the phone on or get the the download screen. Here is the odd thing if I plug the phone into my computer Windows recognizes and Odin can see a COM port but I still can not get past the setup connection when following the directions to try a recover my phone.
PapaKaster said:
I am not sure who frenzifun is but this still doesn't sound good for my situation. What I can tell you is I was following directions to try an update my phone from 2.1 to 2.2 using Odin. I believed the process was completed, not realizing it was not and unplugged my phone from the computer. From that point on I have not been able to turn the phone on or get the the download screen. Here is the odd thing if I plug the phone into my computer Windows recognizes and Odin can see a COM port but I still can not get past the setup connection when following the directions to try a recover my phone.
Click to expand...
Click to collapse
If that is the case, we might be able to do something. Can you meet me in irc at 830 central, tonight?
Txwolf1980 said:
If that is the case, we might be able to do something. Can you meet me in irc at 830 central, tonight?
Click to expand...
Click to collapse
Txwolf I do appreciate the offer and I am in PST and that would 630 my time but I need to take of a few things after and I am not sure I could make that time. One of my places to go is my local Verizon store to see if there anything they can do.
PapaKaster said:
Txwolf I do appreciate the offer and I am in PST and that would 630 my time but I need to take of a few things after and I am not sure I could make that time. One of my places to go is my local Verizon store to see if there anything they can do.
Click to expand...
Click to collapse
Unlessvyou have a hookup, i doubt verizon will help. What I was gonnavtry o garuntees here) is
1. Try flashing in odin with pit, but leavevrepartition unchecked. That most likely won't work, but it's a shot.
2. Use the heimdall version ofvthe guide. I think that may have a better chance. I'll hang out in irc for a while tonight. Just in case.
Txwolf1980 said:
Unlessvyou have a hookup, i doubt verizon will help. What I was gonnavtry o garuntees here) is
1. Try flashing in odin with pit, but leavevrepartition unchecked. That most likely won't work, but it's a shot.
2. Use the heimdall version ofvthe guide. I think that may have a better chance. I'll hang out in irc for a while tonight. Just in case.
Click to expand...
Click to collapse
I just got home but will again be leaving soon. I am sorry if you waited in IRC for me. You are right Verizon did nothing.
PapaKaster said:
I just got home but will again be leaving soon. I am sorry if you waited in IRC for me. You are right Verizon did nothing.
Click to expand...
Click to collapse
Its all good. Try the suggestions I gave you, when you have time. If they don't work, I'll have some down time tomorrow or sunday. Just let me know, and we'll see if we can make the schedules match

[Q] Urgent help! update auto installed, and bricked my phone.

I have the Lg g2 D800 varient, and tonight I got an update for 15.4mb, that pushed without my permission, and now my screen is on a black screen, upon rebooting after said update was installed. I am rooted, but no plans to update to 4.4, it just did it without consent..
Help?
Edit:
Stuck on a bootloop, the LG logo flashes for a second, then its a lighted black screen. I plug my phone inot the pc, and 20 windows popup asking If I want to format G drive.
No twrp installed.
Dreamincolr said:
I have the Lg g2 D800 varient, and tonight I got an update for 15.4mb, that pushed without my permission, and now my screen is on a black screen, upon rebooting after said update was installed. I am rooted, but no plans to update to 4.4, it just did it without consent..
Help?
Click to expand...
Click to collapse
do you have custom recovery?(if you have twrp than this will help http://forum.xda-developers.com/showthread.php?t=2451696) do you know how to enter download mode, can you access it, how about you flash to stock?(if you can get into download mode than this will help http://forum.xda-developers.com/showthread.php?t=2432476)
Dreamincolr said:
I have the Lg g2 D800 varient, and tonight I got an update for 15.4mb, that pushed without my permission, and now my screen is on a black screen, upon rebooting after said update was installed. I am rooted, but no plans to update to 4.4, it just did it without consent..
Help?
Click to expand...
Click to collapse
downgrade back to 10d using flashtool,
root,install twrp,reflash twrp 2.6.3.3
then follow this method.
http://forum.xda-developers.com/showthread.php?t=2665391
XxZombiePikachu said:
do you have custom recovery?(if you have twrp than this will help http://forum.xda-developers.com/showthread.php?t=2451696) do you know how to enter download mode, can you access it, how about you flash to stock?(if you can get into download mode than this will help http://forum.xda-developers.com/showthread.php?t=2432476)
Click to expand...
Click to collapse
No custom recovery, or twrp. I tried to install those last week, but I was unsucessful, and stuck with root for now. No download mode at the moment, I tried to enter it, and my phones lg logo flashed for a second before going to the black screen.
podagee said:
downgrade back to 10d using flashtool,
root,install twrp,reflash twrp 2.6.3.3
then follow this method.
http://forum.xda-developers.com/showthread.php?t=2665391
Click to expand...
Click to collapse
actually he does not want kitkat apparently
---------- Post added at 11:38 PM ---------- Previous post was at 11:33 PM ----------
Dreamincolr said:
No custom recovery, or twrp. I tried to install those last week, but I was unsucessful, and stuck with root for now. No download mode at the moment, I tried to enter it, and my phones lg logo flashed for a second before going to the black screen.
Click to expand...
Click to collapse
you can try this but you need Ubuntu and I'm not exactly sure it will work(also you need to find the correct files for your model), also if your phone is under warranty you can try taking it to att store and telling them update killed your phone but of course don't mention anything about root
sorry forgot to put actual link http://forum.xda-developers.com/showthread.php?t=2582142
podagee said:
downgrade back to 10d using flashtool,
root,install twrp,reflash twrp 2.6.3.3
then follow this method.
http://forum.xda-developers.com/showthread.php?t=2665391
Click to expand...
Click to collapse
XxZombiePikachu said:
actually he does not want kitkat apparently
Click to expand...
Click to collapse
Only because Im ignorant in learning how to flash, I came from iOS, and I'm still learning. I just want my phone back on at this point. I only rooted, and a silly update from att downloaded while I was rooted, and It auto rebooted into an LG logo flash, followed by a black screen.
Dreamincolr said:
Only because Im ignorant in learning how to flash, I came from iOS, and I'm still learning. I just want my phone back on at this point. I only rooted, and a silly update from att downloaded while I was rooted, and It auto rebooted into an LG logo flash, followed by a black screen.
Click to expand...
Click to collapse
yes I was just saying you did not want kit kat because he posted a link on how to get kk which is also outdated since now there is a method where get root and recovery
also incase you did not notice I had forgotten to put the link back there which is here http://forum.xda-developers.com/showthread.php?t=2582142
XxZombiePikachu said:
yes I was just saying you did not want kit kat because he posted a link on how to get kk which is also outdated since now there is a method where get root and recovery
also incase you did not notice I had forgotten to put the link back there which is here http://forum.xda-developers.com/showthread.php?t=2582142
Click to expand...
Click to collapse
Ah, yeah, I cant even get into the factory hard reset. It just turns off and on to a black screen. Thank you for your help, though.
Im freaking out, -_-. I regret for even allowing it to update, I should have tried to turn the phone off.
Well if the guy doesnt want kitkat downgrade to 10d. That woul be the best option
podagee said:
Well if the guy doesnt want kitkat downgrade to 10d. That woul be the best option
Click to expand...
Click to collapse
he can't access download mode, if you would read you would know
XxZombiePikachu said:
he can't access download mode, if you would read you would know
Click to expand...
Click to collapse
Well i had that happeb a few times.... i just left it at the black screen and about 30 minutes it rebooted.
I could still access download mode when that happened to me.
podagee said:
Well if the guy doesnt want kitkat downgrade to 10d. That woul be the best option
Click to expand...
Click to collapse
How do I even do this? my pc isnt even recognizing the phone.
podagee said:
Well i had that happeb a few times.... i just left it at the black screen and about 30 minutes it rebooted.
I could still access download mode when that happened to me.
Click to expand...
Click to collapse
I mean, the phone is on, the back light is on, its just..black. I plugged my phone in, and Im not sure why, but 20 windows pop up asking if I want to format the drive.
Dreamincolr said:
I mean, the phone is on, the back light is on, its just..black. I plugged my phone in, and Im not sure why, but 20 windows pop up asking if I want to format the drive.
Click to expand...
Click to collapse
dont format it.
okay now you have to be quick when you do this to get into download mode...
plug your usb into your phone and have it hanging in the usb port in the computer or plug.
now hold the power button until it turns off.
quickly plug in the port/plug and hold the up button.
you have to do it really quickly. took me a few tries.
once in download mode restore to factory whichever image you choose.
ive had this done a couple times to my phone and it does work if you act quickly.
Have you tried this? http://forum.xda-developers.com/showthread.php?t=2582142
If you can access download mode by holding. UP volume while plugging in USB, you can flash the correct. kdz file to return to stock http://forum.xda-developers.com/showthread.php?t=2432476
missiveusa said:
Have you tried this? http://forum.xda-developers.com/showthread.php?t=2582142
If you can access download mode by holding. UP volume while plugging in USB, you can flash the correct. kdz file to return to stock http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
First link should work for you. I'm on D802, but had exactly the same problem and this solved it completly.
But be careful while doing it, it's really easy to mess things up.
Schindler069 said:
First link should work for you. I'm on D802, but had exactly the same problem and this solved it completly.
But be careful while doing it, it's really easy to mess things up.
Click to expand...
Click to collapse
Makes me wish I owned linux. Ill continue to look, but thanks
Dreamincolr said:
Makes me wish I owned linux. Ill continue to look, but thanks
Click to expand...
Click to collapse
Just get a virtual machine, it does the job just fine.
I did it with VirtualBox and Ubuntu. And make sure, you disable auto mount usb in ubuntu to prevent opening the 20 "partition" windows.

Categories

Resources