Related
Hi Members!
I'm new to Flashing!
First i want to ask somethings before flashing my PPC-6800
Like we all know it's a CDMA!
If it was a GSM i flashed without asking you guys!
I mean GSM has a SIM card with all configurations right!
What about CDMA?
If i flash my phone, will my CDMA network in my country find my PPC automatic?
Or i need to go to Service Provider of my CDMA network to re-configure my phone number settings?
With best regards ShavkaT.
Does anybody know hd2 usa work for att sim card? I am flashing the spl to use the package 3 provide by cotulla and try to make it works... But ATT sim card just cant use in the hd2 usa....If anybody know about it please post i will be very appreciated thanks a lot
Yes it will work, but you must remove the simlock off the HD2 and you won't have 3G
How do i remove the simlock off the HD2?
Get an unlock code. Either from Tmobile or an online unlock code site.
This has nothing to do with ROM development.
i do have the unlock code from Tmobile USA, when i changed the AT&T Simcard it doesn't popup any thing, please let me know, what may cause that problem can't do the unlock procedure, my two causin had the same phone, they using same AT&T simcard to unlock it....i need some help and feed back...
If you have the tmous hd2 then you will have to flash a rom that doesnt have the preconfigured tmobile settings in it or look around for the connection setup cab for leo, then it will set up your connection for att....using tmous hd2 on att myself.....could flash the rom i released today...runs fine on att....
Hello guys,
got one atrix at&t 4g in hands right now wich cant accept any sim card. Even the at&t one. Customer told he bought it as unlocked at am usa bestbuy shop and as arrived in home realised it´s locked indeed. As far i can see also to at&t sim card as it asks for network pin. I tried to updated it to [STOCK ROM] Android 2.3.4 Gingerbread 4.5.91 (Safest Update) following xda guide, but it keeps locked also to at&t. N tip or help from someone?
Rgds,
Buy an unlock code perhaps?
i tried
Pat123 said:
Buy an unlock code perhaps?
Click to expand...
Click to collapse
i did it, but the 8-dig unlock code did not work. Will try a 16 dig from a diff supplier. Weird is it should accept at&t sim card. But it doesnot.
im having a bit of a hard time understanding what u mean by the ATT sim not being accepted..if u mean there no signal when u put the sim in, its because ur friend bought it without activating it with an ATT number most likely. In which case a non active ATT sim will not register with the Roaming partners which will show up on ur phone as no service. Get a valid code from a seller such as cellunlock.net i used them and they're code worked perfectly, once u sim unlock the phone then put in a SIM from ur country and it should pick up signal all u have to do then is create a motoblur account or choose to skip that process.
none sim card
djkinetic said:
im having a bit of a hard time understanding what u mean by the ATT sim not being accepted..if u mean there no signal when u put the sim in, its because ur friend bought it without activating it with an ATT number most likely. In which case a non active ATT sim will not register with the Roaming partners which will show up on ur phone as no service. Get a valid code from a seller such as cellunlock.net i used them and they're code worked perfectly, once u sim unlock the phone then put in a SIM from ur country and it should pick up signal all u have to do then is create a motoblur account or choose to skip that process.
Click to expand...
Click to collapse
Thany u for replying...
Sorry man for yr misunderstading. Wht i mean is wht i said: it does not accept any sim card. Neither one from at&t. Then, if i insert an at&t sim card (yep, i have more than 4 of them) phone asks for network pin, just like it asks when i insert other operators sim card, like claro brazil (i.e).
Its regular expected behavior should be accepting, at least, the at&t sim card since it´s from usa at&t. Of course it would not show network signal cos i am outside usa and my at&t sim cards have no credits, but it should not ask for a network pin when a at&t sim card is inserted.
Rgds,
Gingerblur
Hi there Antonio. Had same problem here in Peru. Thanks to Tenfar´s CMW recovery and Gingerblur I managed to make my Atrix work with Claro Peru and Movistar. Just look for them in the development forums.
duvate said:
Hi there Antonio. Had same problem here in Peru. Thanks to Tenfar´s CMW recovery and Gingerblur I managed to make my Atrix work with Claro Peru and Movistar. Just look for them in the development forums.
Click to expand...
Click to collapse
Can you explain what exactly it was that you did to resolve this issue??
up... up...
no success with tenfar´s as suggested by Duvate. N other help pls?
Rgds
8)
sounds like the phone is asking for a SIM Pin or what's known as a PUK Code, which unfortunately if u dont know it, u have to contact the carrier of the sim card for it, my advice would b to try to get a sim unlock code, put the code in just to make sure it is unlocked, then stick the sim for ur country's carrier inside the phone. It will probably ask for a pin again at that point call ur provider, and give them the imei/serial of the sim and ask for the sim pin/puk code. hopefully that resolves the problem. Also do not try to guess the code more then 3 times or u will fry/burn ur sim card and will need a new one.
Network pin code
djkinetic said:
sounds like the phone is asking for a SIM Pin or what's known as a PUK Code, which unfortunately if u dont know it, u have to contact the carrier of the sim card for it, my advice would b to try to get a sim unlock code, put the code in just to make sure it is unlocked, then stick the sim for ur country's carrier inside the phone. It will probably ask for a pin again at that point call ur provider, and give them the imei/serial of the sim and ask for the sim pin/puk code. hopefully that resolves the problem. Also do not try to guess the code more then 3 times or u will fry/burn ur sim card and will need a new one.
Click to expand...
Click to collapse
Thank u man, but it prompts for network pin code, no sim card pin code.
Thank u again. I appreciate it.
antoniolcrd said:
Thank u man, but it prompts for network pin code, no sim card pin code.
Thank u again. I appreciate it.
Click to expand...
Click to collapse
Are you sure it's an ATT Atrix? Could it be that you have for example a Bell Atrix?
p.s. according to widely spread beliefs, if you type in the network unlock code wrong too many times, the phone will become hard locked, meaning it won't accept any sim card. could be that the person you got it from did just that.
If you can still put in a network pin your good. See, you may have an AT&T sim, but it has no service so the phone wont read it until it's unlock. You need to purchase an unlock. DO NOT GO GUESSING. I believe the Atrix has 5 attempts before locking you out forever.
at & t
@xploited
yep, it´s from at&t. It is bundled into at&t pack and also i flashed it OTA last at&t release.
@Purple Drama Llama
yep, it still asks for network pin code to unlock. No one msg like contact operator or phone freezed or whatever. Then i think it may not be hardlocked... yet.
p.s: ordered a third supplier an unlock code. Hope not be refunded this time since i hope it may work good. Wish me luck.
Rgds,
Hi, guys. I have the same problem i've purchased atrix without contract in the at&t retail store, they e-mailed me the unlock code, but the code is wrong i said it to them, they were surprised and e-mailed me another one and it is wrong too they (in the att store) said, that either of them should work and they don't know what to do. i still cant use my sim card. At&t sim was never used in that phone. is it important to have att sim inserted even once? and what to do with the phone?
baseband needed
Hello guys,
pls would some1 upload here the baseband version 1.77.07p?
thnk u all.
antoniolcrd said:
Hello guys,
pls would some1 upload here the baseband version 1.77.07p?
thnk u all.
Click to expand...
Click to collapse
May wanna search in the correct forums for stuff like that probably get more responses.
Sent from my MB860 using xda premium
At Last!!!!
Hello Folks,
at last i managed to solve it. Flashed 1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf back and got the same: unsuccesfull unlock. Then flashed the baseband Retail Brazil Radio.sbf and enter the unlocking code from at&t and Voila... unlocked!!!
Thank you all. Let me quickly get into Aura
Hello!
Junior
I'm also from Brazil and I am having the same problem!
Spend more details on how you achieved this miracle! if you can make the files available used would be great!
I'm with version 2.3.4
Abs
I'm a N00B, but I've spent close to 30 hours reading up on posts the past three days. I have the same problem as stated in the original post... even my AT&T sim results in a request for the unlock code now.
I started with an AT&T Atrix. I unlocked the boot loader, put CWM recovery on, put Alien v4 ROM on...then the next day AT&T called me with my unlock code for international use. When I put a new sim in it asked for the code, but did not accept it "Network unlock result unsuccessful" Two other sims just immediately went to "Subsidy Lock ..." statement without asking for the unlock code... then my AT&T sim stopped working, and went to asking for an unlock code right away. Phone also will not pick up any signal, nor connect to any networks
I have entered many codes many times, and not circumvented the error, nor permanently locked it...
My next steps are to install the Gingerbread 2.3 ROM available here: https://supportforums.motorola.com/thread/49191?start=0&tstart=0
Then use RSD lite to flash the AT&T 4.5.91 firmware available here: http://forum.xda-developers.com/showthread.php?t=1125944
After which I am hoping I can enter the unlock code, then re-unlock the boot loader, and flash back to alien v4 ROM again.
Do you think this will work, or have any other better ideas?
Should I use RSD Lite to flash the original firmware .sbf file?
My best guess is that the unlocked boot loader is preventing the phone from carrier unlocking ???
Extra credit:
- any idea how the phone is not permanently frozen after entering unlock codes up to 50 times?
- Will I need to put CWM recovery on the phone again?
- Any idea how the AT&T sim stopped working (while still working fine in another phone)
Please help and I hope this post will help others...
the boot loader unlock .sbf was only 13 MB, but the original 4.5.91 AT&T firmware .sbf is 1.5 GB unzipped... is flashing this mega-file through RSD lite the way to get this operating, or warrantee returnable again from its present state of unlocked boot loader, and not accepting any sims? Thank You
---------- Post added at 04:31 PM ---------- Previous post was at 03:31 PM ----------
FYI: when installing the MotoBlur Gingerbread 2.3 ROM I get a
"Verifying current system...
assert failed: apply_patch_check ("/... lots of alphanumerics
E:Error in /sdcard/Blur_Version....
(Status 7)
Installation aborted"
any ideas? Thanks for your time on this...
I have a galaxy S4 sch-r970 (from US Cellular) and I am located in Europe (Greece), when I put my local carrier sim it says invalid sim, do you think that my phone is sim locked?. Also in options, at available bands, it has only cdma/lte, no gsm/wcdma to select.Anyone know how can I enable the GSM band to use it in my Country? I know the phone hardware supports the GSM bands, also its written on the manual and on the box. Can I flash a european rom and rebrand the phone to a gt-i9505? or flash another modem to enable GSM?? I cannot find any complete instructions about this. Plase if anyone know what to do give me some light, I have searched all over the internet without a clear answer
sazistas said:
I have a galaxy S4 sch-r970 (from US Cellular) and I am located in Europe (Greece), when I put my local carrier sim it says invalid sim, do you think that my phone is sim locked?. Also in options, at available bands, it has only cdma/lte, no gsm/wcdma to select.Anyone know how can I enable the GSM band to use it in my Country? I know the phone hardware supports the GSM bands, also its written on the manual and on the box. Can I flash a european rom and rebrand the phone to a gt-i9505? or flash another modem to enable GSM?? I cannot find any complete instructions about this. Plase if anyone know what to do give me some light, I have searched all over the internet without a clear answer
Click to expand...
Click to collapse
Your phone is Qualcomm based. The hardware supports GSM and LTE. Did you try flashing a GT i9505 ROM? That should come with a GSM enabled radio. I wonder if the antennas on your phone support your country's frequencies.
rojocapo said:
Your phone is Qualcomm based. The hardware supports GSM and LTE. Did you try flashing a GT i9505 ROM? That should come with a GSM enabled radio. I wonder if the antennas on your phone support your country's frequencies.
Click to expand...
Click to collapse
I just tried to flash the custom rom omega now for i9505 and working, but first problem I cannot turn on the wifi.I insert my sim card and it says NO SIM card inserted. At original rom used to say invalid sim. Maybe this has to do with the sim lock. I will try to call us-cellular and ask them for unlock code. Also in supported networks now I have also gsm/wcdma but I when I select one of them it returns back automaticly to CDMA. So maybe its something that has to do with the modem. Can I flash a european modem or it will hard brick my device? anyone know?
rojocapo said:
Your phone is Qualcomm based. The hardware supports GSM and LTE. Did you try flashing a GT i9505 ROM? That should come with a GSM enabled radio. I wonder if the antennas on your phone support your country's frequencies.
Click to expand...
Click to collapse
Try flashing an XX modem for the i9505 from this thread:
http://forum.xda-developers.com/showthread.php?t=2192025
That way you won't have to reflash the whole ROM.
---------- Post added at 11:12 AM ---------- Previous post was at 11:10 AM ----------
sazistas said:
I just tried to flash the custom rom omega now for i9505 and working, but first problem I cannot turn on the wifi.I insert my sim card and it says NO SIM card inserted. At original rom used to say invalid sim. Maybe this has to do with the sim lock. I will try to call us-cellular and ask them for unlock code. Also in supported networks now I have also gsm/wcdma but I when I select one of them it returns back automaticly to CDMA. So maybe its something that has to do with the modem. Can I flash a european modem or it will hard brick my device? anyone know?
Click to expand...
Click to collapse
Did you try to SIM unlock the phone with the method described here:
http://forum.xda-developers.com/showthread.php?t=2282683
MAKE AN EFS BACKUP FIRST!!!
---------- Post added at 11:17 AM ---------- Previous post was at 11:12 AM ----------
Go into service mode by dialing *#0011# and see what network type settings you find.
rojocapo said:
Try flashing an XX modem for the i9505 from this thread:
http://forum.xda-developers.com/showthread.php?t=2192025
That way you won't have to reflash the whole ROM.
---------- Post added at 11:12 AM ---------- Previous post was at 11:10 AM ----------
Did you try to SIM unlock the phone with the method described here:
http://forum.xda-developers.com/showthread.php?t=2282683
MAKE AN EFS BACKUP FIRST!!!
---------- Post added at 11:17 AM ---------- Previous post was at 11:12 AM ----------
Go into service mode by dialing *#0011# and see what network type settings you find.
Click to expand...
Click to collapse
are you sure that it is safe to do this? some say flashing another carrier modem can hard brick devices! I dont care if it will soft bricked and then reflash it *with odin to revive but I dont want to end with a complete dead phone
I have copied the entire EFS folder to a safe place? is this enough for backup? also tried already this sim unlock method, but doesnt seem to do something, I still have the invalid sim error message.
by dialing *#0011# I find that has all the network settings about WCDMA,GSM,LTE,CDMA, and also all the frequencies about each band.
another question is: if the hardware its completly the same as the european version, theoretically someone can flash the european modem,rom,kernel and bootloader and transform the device completly to a european model. Can anyone give me a clear answer if this is possible? because I dont know a reason why this cant be done.!! and I am much interested to do this, if its possible :laugh:
sazistas said:
another question is: if the hardware its completly the same as the european version, theoretically someone can flash the european modem,rom,kernel and bootloader and transform the device completly to a european model. Can anyone give me a clear answer if this is possible? because I dont know a reason why this cant be done.!! and I am much interested to do this, if its possible :laugh:
Click to expand...
Click to collapse
I don't know if the hardware is completely the same or not. You have already flashed Omega 6 which is based on a GSM stock ROM and includes GSM modem firmware which works in Europe.
The issue here imho is configuring the modem correctly, since it was configured by Samsung for US Cellular so it works in CDMA mode. Does the phone go into GSM roaming mode if you plug in a US Cellular SIM card?
Copying the contents of the EFS partition is not enough. I would use an EFS backup/restore app for that task.
Playing with the baseband configuration can hard brick the phone, as some have reported.
rojocapo said:
I don't know if the hardware is completely the same or not. You have already flashed Omega 6 which is based on a GSM stock ROM and includes GSM modem firmware which works in Europe.
The issue here imho is configuring the modem correctly, since it was configured by Samsung for US Cellular so it works in CDMA mode. Does the phone go into GSM roaming mode if you plug in a US Cellular SIM card?
Copying to contents of the EFS partition is not enough. I would use an EFS backup/restore app for that task.
Playing with the baseband configuration can hard brick the phone, as some have reported.
Click to expand...
Click to collapse
the omega rom didnt changed my modem, I can see in about phone but it remains the original.
I have put the us cellular sim card but cannot connect to any network.
Also about EFS, I tried the efs pro but after recognising the phone with ADB doesnt show in the list inside the program. Maybe due to not known model like i9505
sazistas said:
the omega rom didnt changed my modem, I can see in about phone but it remains the original.
I have put the us cellular sim card but cannot connect to any network.
Also about EFS, I tried the efs pro but after recognising the phone with ADB doesnt show in the list inside the program. Maybe due to not known model like i9505
Click to expand...
Click to collapse
You are right about Omega 6 not changing the modem software. I have been using Omega for S3 since Aug 2012 and I thought the modem firmware was always updated to match the rest of the release. Sorry about that mistake.
Can you call US Cellular and ask if they have roaming agreement with your Greek GSM operator? That might shed some light on compatibility.
rojocapo said:
You are right about Omega 6 not changing the modem software. I have been using Omega for S3 since Aug 2012 and I thought the modem firmware was always updated to match the rest of the release. Sorry about that mistake.
Can you call US Cellular and ask if they have roaming agreement with your Greek GSM operator? That might shed some light on compatibility.
Click to expand...
Click to collapse
I will give them a call, but I believe the reason why cannot find network with uscellular sim its not having roaming agreement with Greek GSM as you said. But I dont care about roaming. I want to use my local sim cards for GSM network and pay for local prices.
little update: I just called us-cellular customer care, and they cannot help me! They are trying to tell me that this is a not world phone and I can use it only with their sim cards ! :laugh: they Dont know also something about sim lock, cannot provide me any unlock codes they said. So, anyone can tell me what can I do now? I dont want to sell it.
sazistas said:
little update: I just called us-cellular customer care, and they cannot help me! They are trying to tell me that this is a not world phone and I can use it only with their sim cards ! :laugh: they Dont know also something about sim lock, cannot provide me any unlock codes they said. So, anyone can tell me what can I do now? I dont want to sell it.
Click to expand...
Click to collapse
Well, if selling it is not an option, you can try flashing an old 9505 XX modem from the post I mentioned previously and then try to SIM unlock it from the service menu.
rojocapo said:
Well, if selling it is not an option, you can try flashing an old 9505 XX modem from the post I mentioned previously and then try to SIM unlock it from the service menu.
Click to expand...
Click to collapse
What about buying an unlock code on eBay? I've done it several times and it usually works. The cost is very low, usually less than 5 US dollars
hey any update
bassist82 said:
little update: I just called us-cellular customer care, and they cannot help me! They are trying to tell me that this is a not world phone and I can use it only with their sim cards ! :laugh: they Dont know also something about sim lock, cannot provide me any unlock codes they said. So, anyone can tell me what can I do now? I dont want to sell it.
Click to expand...
Click to collapse
did u get a correct rom to activate the gsm frequency ?
bassist82 said:
I will give them a call, but I believe the reason why cannot find network with uscellular sim its not having roaming agreement with Greek GSM as you said. But I dont care about roaming. I want to use my local sim cards for GSM network and pay for local prices.
Click to expand...
Click to collapse
Hi, I have the same phone, and I am in Dominican Republic. I need to use it with a local GSM provider, but when I insert the sim card the phone shows the message INVALID SIM CARD.
Did you resolved this issue? If so, please tell me how to resolve it.
Thanks.
Hi !!
rafelitosoriano said:
Hi, I have the same phone, and I am in Dominican Republic. I need to use it with a local GSM provider, but when I insert the sim card the phone shows the message INVALID SIM CARD.
Did you resolved this issue? If so, please tell me how to resolve it.
Thanks.
Click to expand...
Click to collapse
Make a Back-up First !!!!!
Try to download "GalaxSim Unlock" App for root users only, Run the "GalaxSim Unlock" and buy the unlock service, if it work ( GalaxSim Unlock State: Unlocked), then flash you phone ( I dont know what rom work fine for this phone).
xxsuperdomxx said:
Make a Back-up First !!!!!
Try to download "GalaxSim Unlock" App for root users only, Run the "GalaxSim Unlock" and buy the unlock service, if it work ( GalaxSim Unlock State: Unlocked), then flash you phone ( I dont know what rom work fine for this phone).
Click to expand...
Click to collapse
Just checking if someone has been able to use an overseas sim card with this phone? If yes, what was used as a means to unlock the sim... Please help.
rojocapo said:
Well, if selling it is not an option, you can try flashing an old 9505 XX modem from the post I mentioned previously and then try to SIM unlock it from the service menu.
Click to expand...
Click to collapse
I tried all modems from your link, but each time I get error on odin "secure check fail". Can you help?
bassist82 said:
I just tried to flash the custom rom omega now for i9505 and working, but first problem I cannot turn on the wifi.I insert my sim card and it says NO SIM card inserted. At original rom used to say invalid sim. Maybe this has to do with the sim lock. I will try to call us-cellular and ask them for unlock code. Also in supported networks now I have also gsm/wcdma but I when I select one of them it returns back automaticly to CDMA. So maybe its something that has to do with the modem. Can I flash a european modem or it will hard brick my device? anyone know?
Click to expand...
Click to collapse
did u ever get it?
Hello, I have the exact same problem (hardware revision and country)
Did you ever manage to solve it?
Hi to All! I'm from Uzbekistan and my provider is Perfectum cdma operator. I bought my redmi 2 from aliexpress. About 2 month I used first slot as cdma. There is no Ev-Do in my country. Thats why I subscribed to GSM operator and put SIM card to first slot and used WCDMA for internet. Regularly updated original MIUI rom. But week ago want to back to my CDMA operator and put Ruim to first slot. The phone cannot connect to cdma network. No signal bar. Tried change bands from *#*#4636#*#* but no result. When put this RUIM to another phone is ok. What should I do to connect to CDMA network?
Check out this homie
http://en.miui.com/forum.php?mod=viewthread&tid=166002&extra=page=1&mobile=2
Lennoard said:
Check out this homie
http://en.miui.com/forum.php?mod=viewthread&tid=166002&extra=page=1&mobile=2
Click to expand...
Click to collapse
Thank you very much! But this is for 813 version. Maybe this version is GSM. My is 821 and lost signal only for first CDMA slot. Can I do this method for my 821?
Hi, nurali.
I own the same 821 version. Here in Ukraine "Intertelecom" provides EvDo, it works fine but to get it worked provider's engineer tried several types of R-UIM cards until one of them recognized by phone. So you can ask provider to try other types of R-UIM cards.
Systemseer said:
Hi, nurali.
I own the same 821 version. Here in Ukraine "Intertelecom" provides EvDo, it works fine but to get it worked provider's engineer tried several types of R-UIM cards until one of them recognized by phone. So you can ask provider to try other types of R-UIM cards.
Click to expand...
Click to collapse
Thank you very much for your information. But first month after ordered I used this RUIM. Now phone don't want to connect to cdma network. I put this RUIM to another phone, everything is ok.
anybody can help? After flashing different foms I lose baseband and IMEI/MEID. Now cannot fix basaband. Fastboot flashing not help. Any idea? how to fix "unknown baseband version".
Systemseer said:
Hi, nurali.
I own the same 821 version. Here in Ukraine "Intertelecom" provides EvDo, it works fine but to get it worked provider's engineer tried several types of R-UIM cards until one of them recognized by phone. So you can ask provider to try other types of R-UIM cards.
Click to expand...
Click to collapse
can you send me backup of your modem? After 2-3 reflashing my modem baseband version shown as unknown. Is baseband=modem?