These issues apply to T-Mobile users installing the current build of 4.4 (and possibly other GSM carriers but I don't have an ATT SIM to test). Motorola is aware of the issue. I read these forums pretty thoroughly and I've been answering these questions all over so I figured I'd just put them all one place. Issues as follows:
- Devices with the LTE radio active cannot send SMS
- Devices with the LTE radio active cannot send MMS (Carrier/Settings dependent)
- Devices with the LTE radio active cannot make phone calls and instantly disconnects on call attempt.
Urban Legends:
- Stock tethering does not work - I have personally tested on TMO and know it does work. Yer doin' it wrong.
Fixes
Easiest fix for now if you're on a device running 4.4 and want to... you know... be able to use your phone... is to use phone information and switch the radio mode over to GSM Only (not the auto one). This fix is a little finicky because if the phone realizes it's not running in the mode selected on your mobile networks screen it will override and turn LTE back on if you haven't selected UMTS only.
Full steps are:
Mobile network settings - Change network mode to LTE/GSM/UMTS
Mobile network settings - Select network UMTS Only
Install app linked below
Open Phone Info and select GSM Only
Phone info apk for sideload - http://www.mediafire.com/download/284l17ry2ok1yuk/Phone_info_1.3.apk
I'll update this thread as I discover more issues or as people post issues that can be replicated below.
Thank you. Finally I got the LTE turn off.
I gotta switch the mobile mode to LTE/UMTS/ gsm and select network as UMTS only. Then use phone info choose gsm only.
Sent from my XT1080 using xda app-developers app
vuphongkkk said:
Thank you. Finally I got the LTE turn off.
I gotta switch the mobile mode to LTE/UMTS/ gsm and select network as UMTS only. Then use phone info choose gsm only.
Sent from my XT1080 using xda app-developers app
Click to expand...
Click to collapse
when I use those settings, I only get Edge. I mean, its better than nothing, but still....
DaemonAshra said:
when I use those settings, I only get Edge. I mean, its better than nothing, but still....
Click to expand...
Click to collapse
Not all areas are refarmed for hspa+
Sent from my XT1080 using Tapatalk
arcanexvi said:
Not all areas are refarmed for hspa+
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
It was selecting GSM Only in Phone Info. Switched it to GSM auto (PRL) and I got HSPA+ back.
but Seriously dude. thanks for this info. I was tired of using my Moto G while my MAXX was just collecting Dust.
Edited the OP for a more clear fix. Thank you to vuphongkkk for pointing out the UMTS only.
I'm on T-Mobile and live in an HSPA+ refarmed area (NYC), but there are places I go on a regular basis that aren't refarmed. I set it on "WCDMA preferred" and voila, I have both 2 & 3G connectivity, with preference given to 3G.
I can't post links, but this XDA thread explains it in more detail I think: ... showthread.php?t=688492
Vodafone confirmed for anyone wondering.
H+ for UMTS only,
Edge for global.
No Sim adjusting at all
Just popped a sim in today. Getting LTE but really hating the call fail bug. Gotta place the call twice repeatedly to get it through
Maxx'd out Kit Kat
Update: Having major glitches when running LTE, pretty deal breaking for a full switch to tmo right now. Eagerly awaiting the new OTA to see if it fixes it. Seems to have major issues on the HSPA/LTE handoff. How did it function prior to 4.4?
Maxx'd out Kit Kat
On 4.2.2 was working fine, the phone just switch from LTE to 3g itself when you need to make phone call. But I had problem on 4.2.2 that if I connect to WiFi then it'll take awhile to get the LTE back. Normally an hour after out of WiFi range
Sent from my XT1080 using xda app-developers app
vuphongkkk said:
On 4.2.2 was working fine, the phone just switch from LTE to 3g itself when you need to make phone call. But I had problem on 4.2.2 that if I connect to WiFi then it'll take awhile to get the LTE back. Normally an hour after out of WiFi range
Sent from my XT1080 using xda app-developers app
Click to expand...
Click to collapse
Maybe thats the problem I was having? I just ended up with a 4.2.2 phone after my 4.4 got destroyed. LTE wouldnt work for me but I was in the house after switching off wifi...hmmm
Arcanexvi what's the best APN to use for 4.2.2? And do I have to have phone info installed or can I uninstall it? Since I changed all the settings to get hspa+ I forgot what the default settings were. =\ whoops and thanks for all your help so far
Sent from my XT1080 using xda app-developers app
vlcano57 said:
Arcanexvi what's the best APN to use for 4.2.2? And do I have to have phone info installed or can I uninstall it? Since I changed all the settings to get hspa+ I forgot what the default settings were. =\ whoops and thanks for all your help so far
Sent from my XT1080 using xda app-developers app
Click to expand...
Click to collapse
APN: fast.t-mobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
You can uninstall it if you want. It's extremely small though so no reason to do so unless you just don't want to see the icon. Uninstalling will NOT reset your settings.
Sent from my XT1080 using Tapatalk
Thanks! I messed myself all up though.
In android mobile network settings should I have network mode as global, LTE/CDMA or LTE/gsm/umts?
If its LTE/gsm/umts do I still use gsm only under select network?
And if I leave phone info installed do I have to change anything on there for LTE to work? Phone info seems to change the network selection in the app on its own so I just stopped messing with it. Thanks and sorry to be a pain
Sent from my XT1080 using xda app-developers app
If you on 4.4 you don't have to change anything to have LTE work on your phone. Follow step by step from the beginning of the thread to turn off LTE
Sent from my XT1080 using xda app-developers app
I'm on 4.2.2 and already changed settings. So was curious on what the original settings on 4.2.2 are to get LTE working with APN settings
Sent from my XT1080 using xda app-developers app
4.2.2 rarely get LTE data. Choose network mode as LTE/gsm/UMTS . select network as automatic. Don't use the phone info. If you already use the phone info app in this thread then use it again to switch back to LTE/gsm.. Or the option that has evething.
Remember to add APN fast.t-mobile.com
But as I mentioned, 4.2.2 has some problem with the radio , so it rarely pick up LTE
Sent from my XT1080 using xda app-developers app
Oh well in that case I might as well leave it lol. Thanks for the info
Sent from my XT1080 using xda app-developers app
Just to add another data point, I have a Droid Mini on stock 4.2.2. I'm connecting to t-mobile with the listed apn info, global and auto. I have LTE the vast majority of the time.
Cheers!
Related
Is there a way to force the phone to go LTE only no 3G? I dont see an option for it in the settings. I live in a 4G area and with my thunderbolt it ALWAYS was 4G but my M bounces back and forth, but if I put it in Airplane mode and then take it out it will connect to 4G.
poeskippds said:
Is there a way to force the phone to go LTE only no 3G? I dont see an option for it in the settings. I live in a 4G area and with my thunderbolt it ALWAYS was 4G but my M bounces back and forth, but if I put it in Airplane mode and then take it out it will connect to 4G.
Click to expand...
Click to collapse
Download
https://play.google.com/store/apps/details?id=de.j4velin.notificationToggle&feature=search_result#?t=W251bGwsMSwxLDEsImRlLmo0dmVsaW4ubm90aWZpY2F0aW9uVG9nZ2xlIl0.
go setting and add 4G to the notification bar, there you can choose the one you prefer.
You can do it without the app....open your dialer type*#*#info#*#*
A menu should come up choose phone options, there you will find the radio options. You can pick lte only.
Sent from my XT907 using Tapatalk 2
That app works like a charm. Thanks
Sent from my XT907 using xda app-developers app
poeskippds said:
That app works like a charm. Thanks
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Well both those get to the right spot, but there is no selection for what I am trying to accomplish. On LTE only it won't make calls or send texts. I assume bc LTE is only data. What I want to eliminate is 3G while having voice service forcing the phone to only connect to LTE for data. Is that even possible?
I think if you go to the phone testing menu(*#*#info#*#* in dialer)you should be able to select lte/CDMA only.
Sent from my XT907 using Tapatalk 2
slogar25 said:
I think if you go to the phone testing menu(*#*#info#*#* in dialer)you should be able to select lte/CDMA only.
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
That would work if "LTE/CDMA" was an option. the options are LTE/CDMA/EvDo LTE/GSM/WCDMA LTE/CDMA/EvDo/GSM/WCDM LTE only and LTE/WCDMA,
Sorry I see that now. I was trying to help you off my memory. Should have done my own research. It seems that should be an option to choose. There has to be a way, we will have to find it
Sent from my XT907 using Tapatalk 2
info about my phone:
baseband: .33 right now
ROM: this one at the moment.
also tried this one, this one, and this one
also, its the new white nexus
what I've done so far:
I've tried this on the .33 baseband.
I then found these two zips (1 and 2) to help automate the process a bit, and use those to try baseband .24 and .27 with no change.
then I tried the instructions on this site
and finally, I am now on this rom I mentioned above, which is supposed to have everything done already...
I Know for a fact my area has LTE, as my roommate gets 4G on his S3 every day.
does anyone see anything I might be doing wrong?
Is your roommate using LTE with T-Mobile?
Nexus 4 only supports LTE band 4.
Angeloftheafterlife said:
info about my phone:
baseband: .33 right now
ROM: this one at the moment.
also tried this one, this one, and this one
also, its the new white nexus
what I've done so far:
I've tried this on the .33 baseband.
I then found these two zips (1 and 2) to help automate the process a bit, and use those to try baseband .24 and .27 with no change.
then I tried the instructions on this site
and finally, I am now on this rom I mentioned above, which is supposed to have everything done already...
I Know for a fact my area has LTE, as my roommate gets 4G on his S3 every day.
does anyone see anything I might be doing wrong?
Click to expand...
Click to collapse
are you sure that your roommate has an lte enabled sgs3? the tmo lte enabled sgs3 only went on sale on june 5th.
removed
did you update the APN to fast.t-mobile.com? I can't tell in specific so ill just give you a quick run down.
On multiple devices i've done:
1) flash broadband
2) clear caches/factor reset
3) flash AOKP (or CM 10.1)/GAPPS and clear caches
4) flash franco kernel (not necessary but i prefer it) and clear caches.
5) update APNs
6) change to LTE/GSM in phone info settings.
t989BeLikeItDo said:
Is your roommate using LTE with T-Mobile?
Nexus 4 only supports LTE band 4.
Click to expand...
Click to collapse
Yes he is
simms22 said:
are you sure that your roommate has an lte enabled sgs3? the tmo lte enabled sgs3 only went on sale on june 5th.
Click to expand...
Click to collapse
I might be wrong on the phone model, but I know he is on tmobile LTE
thfreedumb said:
did you update the APN to fast.t-mobile.com? I can't tell in specific so ill just give you a quick run down.
On multiple devices i've done:
1) flash broadband
2) clear caches/factor reset
3) flash AOKP (or CM 10.1)/GAPPS and clear caches
4) flash franco kernel (not necessary but i prefer it) and clear caches.
5) update APNs
6) change to LTE/GSM in phone info settings.
Click to expand...
Click to collapse
I have done all of this. I have the T-Mobile lte APN with IPv4/IPv6. I have also tried just IPv4 or IPv6.
O have also tried creating a new APN with the correct settings
Edit: the settings in the *#*#INFO#*#* menu is LTE/GSM auto (PRL)
Sent from my Nexus 4 using XDA Premium HD app
Angeloftheafterlife said:
Yes he is
I might be wrong on the phone model, but I know he is on tmobile
I have done all of this. I have the T-Mobile lte APN with IPv4/IPv6. I have also tried just IPv4 or IPv6.
O have also tried creating a new APN with the correct settings
Sent from my Nexus 4 using XDA Premium HD app
Click to expand...
Click to collapse
where are you located?
South Houston
Sent from my Nexus 4 using XDA Premium HD app
Angeloftheafterlife said:
South Houston
Sent from my Nexus 4 using XDA Premium HD app
Click to expand...
Click to collapse
well, most of houston has lte http://ltemap.org/tmobile . did you change the phone info to lte/gsm by dialing *#*#4636#*#* in the phone app? select phone info, change the wcdma preferred to lte only. if you see the 4G icon show up, change the lte only to lte/gsm.
simms22 said:
well, most of houston has lte http://ltemap.org/tmobile . did you change the phone info to lte/gsm by dialing *#*#4636#*#* in the phone app? select phone info, change the wcdma preferred to lte only. if you see the 4G icon show up, change the lte only to lte/gsm.
Click to expand...
Click to collapse
Yeah, I tried that. I just lose signal until I change it back to lte/gsm
Edit: ohsh*t look at that. I just started getting 4g. Whadduknow
Sent from my Nexus 4 using XDA Premium HD app
Angeloftheafterlife said:
Yeah, I tried that. I just lose signal until I change it back to let/gsm
Sent from my Nexus 4 using XDA Premium HD app
Click to expand...
Click to collapse
if you did everything right, then you just dont have lte in the area youre in. id try to check for lte around other parts of houston
Yeah, I seem to be getting 4g, but its weak. It switches back to hspa and 3g as soon as I take it off of late only
Sent from my Nexus 4 using XDA Premium HD app
Angeloftheafterlife said:
Yeah, I seem to be getting 4g, but its weak. It switches back to hspa and 3g as soon as I take it off of late only
Sent from my Nexus 4 using XDA Premium HD app
Click to expand...
Click to collapse
sounds like youre on the very edge of lte coverage at this point
Alright, that's kinda what I figured. Thanks for all your help
Sent from my Nexus 4 using XDA Premium HD app
Im running cm 10.1.2 it works great I live were tmobile has lte. so I flash LTE radio and that works great. my apn is tmobel us LTE and my preferred network mode is lte/gsm/wcdma. Sometimes when I drive outside lte coverage zone or in on a weak spot my preferred network mode will change to csm/wcdma. Is this normal? I was driving and I just lost signal the other day Im guessing this is why. I got a screen shot of a app that shows I get lte or hspap with lte/gsm/wcdma. Should I not get both hspap and lte with this setting. Im guessing the phone could not get lte so it changed the profile? Can it do that?. When I was out of the coverage area tried to change it back to let/gsm/wcdma but it defaulted to csm/wcdma.. On reboot it defaults to lte/gsm/wcdma. so i know its working thanks for reading my thread.
I'm pretty sure that is normal. My phone does the same.
Sent from my Nexus 4 using xda premium
myturbo1 said:
I'm pretty sure that is normal. My phone does the same.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
So when your phone changes profile when it gose into a lte zone dose it drops signal or any thing?
I want to say mind dose for a second as the profile changes then if I go back into a LTE zone it will change back. But im not sure as I have only been running this build for a few days and I mostly stay in a LTE zone.
Yes basically disconnects for a sec then changes.
Sent from my Nexus 4 using xda premium
myturbo1 said:
Yes basically disconnects for a sec then changes.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Just wondering why that is? does lte/gsm/wcdma not support hspap? Because my app screen shot told me on that profile i get hspap and lte .
I'm not really sure. But I do not understand why the nexus 4 handles this Network change so slowly. It's annoying at times.
Sent from my Nexus 4 using xda premium
This is useful if you have a weak LTE signal or just don't need it always on. I found this tutorial on a different website for another galaxy phone and it works on the Note 3.
1. Turn off your phone and take out your sim card.
2. Turn on your phone with no sim card and wait a minute or two for it to turn on and settle down.
3. Go to the dialer and dial *#2263#
You should see a menu with band selections. The current setting is "Automatic".
(You have to use the menu key to select your options by using "Key Input" to type the number you want)
If you switch to "GSM All", you will be EDGE (2G).
If you switch to "WCDMA All", you will be on HSPA+ (3G, though AT&T and others call it 4G).
4) Power off the phone again and put your sim card back. Upon reboot you should see your new setting in effect.
I get a service mode that says rat selection is restricted...
However *#*#4636#*#* will allow you to select whatever band you so choose. Although lte only doesn't allow voice calls
Sent from my SAMSUNG-SM-N900A using xda app-developers app
inmotion said:
I get a service mode that says rat selection is restricted...
However *#*#4636#*#* will allow you to select whatever band you so choose. Although lte only doesn't allow voice calls
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
If your sim card is out when trying to access the menu it shouldn't say restricted.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
mazdamiata210 said:
If your sim card is out when trying to access the menu it shouldn't say restricted.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Good catch, I completely missed that part of the write up
inmotion said:
I get a service mode that says rat selection is restricted...
However *#*#4636#*#* will allow you to select whatever band you so choose. Although lte only doesn't allow voice calls
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
I tried the above on my S4 and couldn't get LTE back was stuck on wcdma preferred. Google resulted in a ton of information. Ultimately hard reset needed.
Sent from my SM-N900T using Tapatalk 4
inmotion said:
I get a service mode that says rat selection is restricted...
However *#*#4636#*#* will allow you to select whatever band you so choose. Although lte only doesn't allow voice calls
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Yeah that code doesn't work for me. It never worked for my note 2 or note 1 so I wouldn't recommend doing it.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Limeybastard said:
I tried the above on my S4 and couldn't get LTE back was stuck on wcdma preferred. Google resulted in a ton of information. Ultimately hard reset needed.
Sent from my SM-N900T using Tapatalk 4
Click to expand...
Click to collapse
Sorry about your luck with it, I've never had a problem using it to switch between lte, wcdma, or gsm on my s4 or this note 3. Weird...
Sent from my SAMSUNG-SM-N900A using xda app-developers app
inmotion said:
Sorry about your luck with it, I've never had a problem using it to switch between lte, wcdma, or gsm on my s4 or this note 3. Weird...
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Im stuck now, already posted another thread about this in the S4 section.
Works on Note 3
inmotion said:
I get a service mode that says rat selection is restricted...
However *#*#4636#*#* will allow you to select whatever band you so choose. Although lte only doesn't allow voice calls
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Thank you inmotion! This code actually worked better for me on my Samsung Galaxy Note 3. I didn't even have to pull out my SIM card or reboot. Just dial in the code, go to Device Info and change the preferred radio network type. It changes the radio on the fly in real time, and can be seen at the top.
Since Android 4.3 and on the option to disable LTE/4G has been removed from all AT&T Android devices.
Solarenemy68 said:
Since Android 4.3 and on the option to disable LTE/4G has been removed from all AT&T Android devices.
Click to expand...
Click to collapse
Actually it was before that. Could not do it on my note 1. Would always get RAT restricted. This was on at&t. Other networks were able to use those codes and make the switch.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
1. Download the free Phone info app from the Google Play Store and install it
2. Choose the Phone Information tab and notice the "Set preferred network type" option at the bottom, marked with an arrow at the right of the drop-down menu
3. Tap on the preferred network listing currently in use, and choose the "CDMA auto (PRL)" option from the drop-down list
4. You should be now maintaining connection to only Verizon's 3G network, and whenever you need to use data, you can switch back to LTE for the duration of it
There are numerous other apps and widgets at the Play Store that claim to do the 2G/3G/4G switch, but many users on Verizon have confirmed the Phone info app to be the only method allowing them to reliably turn off the 4G LTE on their Samsung Galaxy S IIIs.
why would people want to disable LTE? (real question)
pham818 said:
why would people want to disable LTE? (real question)
Click to expand...
Click to collapse
I rather disable 3g so I can stay at lte all the time!
netnerd said:
I rather disable 3g so I can stay at lte all the time!
Click to expand...
Click to collapse
Thats what your phone already does...
pham818 said:
Thats what your phone already does...
Click to expand...
Click to collapse
nope. when 4g lte signal is weak, it drops to "4g".
netnerd said:
nope. when 4g lte signal is weak, it drops to "4g".
Click to expand...
Click to collapse
yeah of course,,,, LTE is not covered in all areas....
Does anyone know how to do a network reset? Because I connect to any Data at all no 4G LTE or 3G none of those. I can't send or receive pictures and go on the internet. I tired taking out Sim card for awhile and still didn't work. Does anyone know what to do? And how to reset network?
Sent from my SAMSUNG-SM-N900A using Tapatalk
Does anyone know how to do a network reset? Because I connect to any Data at all no 4G LTE or 3G none of those. I can't send or receive pictures and go on the internet. I tired taking out Sim card for awhile and still didn't work. Does anyone know what to do? And how to reset network?
Sent from my SAMSUNG-SM-N900A using Tapatalk
shaqqq said:
Does anyone know how to do a network reset? Because I connect to any Data at all no 4G LTE or 3G none of those. I can't send or receive pictures and go on the internet. I tired taking out Sim card for awhile and still didn't work. Does anyone know what to do? And how to reset network?
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
Reset your APN. Make sure it's att phone
Sent from my SM-N900V using xda app-developers app
I don't know if I enabled something by accident but for some reason the wifi and 4G icon are always visible. Wasn't that way when I got the phone. Any ideas?
Sent from my SM-N900V using xda app-developers app
Bump my own thread.
Sent from my SM-N900V using xda app-developers app
Go to settings >> networks - check to see what you have your network set to.. if you're connected to LTE, it'll show the 4G/LTE icon (there's nothing wrong with showing it). If you don't want to be on LTE, you can change your automatic network settings. Keep in mind, networks are always dropping from 4G to 3G, so at times when you're not on 4G you won't see it.
i think what he means is wifi and lte icons showing up at the same time, none of the android phones i have used is like that, sorry cant help
Sent from my SM-N900W8 using Tapatalk