Lets begin shall we? You are reading this, because u bought an amazing tablet and u have good taste just like me
In this thread i will mantain updated all the development stuff and guides related to our G Pad 8.3 (LG-V500 Only) all in one place, making it easyer if u are a new user to learn essential things about G Pad, and if u are a normal user to find what you were looking for easyer and faster.
If u have doubts about whats rooting custom roms, custom recoveries, flashing see this thread
First thing to do install our device drivers
How To Root G Pad?
Currenttly Available Methods - two methods are know so far, other can be added as our tablet is only now beggining is life
1st Method - Kingo Root App Method
1 - Have Drivers Installed.
2 - Turn on Developer Mode on your G Pad, System Settings-->About Tablet-->Software information-->Tap Build number 7 times.
3 - After Developer Mode is enabled, go to System Settings-->Developer options-->and place checkmark next to USB debugging.
4 - On your PC, go to the Kingo Root website, download and install the program.
5 - Plug your G Pad into your PC via USB cable, run the Kingo Root software and follow the prompts.
6 - Done!
Click to expand...
Click to collapse
However exist some discussion around this method as some say that this method injects code on your phone that retrieve some data and sent it to a server in china
Thanks goes to @oesjmr the Kingo People & joshuadjohnson22 for bringing this up.
Original Thread
2nd Method - Rooting Script By dalingrin
1 - Have Drivers Installed.
2 - Turn on Developer Mode on your G Pad, System Settings-->About Tablet-->Software information-->Tap Build number 7 times.
3 - Run root.bat and Follow The Prompts (Linus & Mac Users should read root.bat and run the same commands on their systems)
Click to expand...
Click to collapse
Thanks goes to @dalingrin
Original Thread
Warning: Root will most certainly void your warranty. To get your tablet serviced best would be best to flash back to a stock ROM.
Current Custom Recoveries And How To Install Them - There are two existing custom recoveries at the moment
1st - TWRP 2.6.3.2 or Team Win Recovery Project ( Official - 10.12.2013 )
Detailed Instructions on How To Install Here
Credits: @Drgravy
Note: To use flashify to flash latest update just change the file type from .lok to .img and now u can flash it at ease.
2nd - CWM 6.0.4.5 or Clock Work Mode Recovery ( Unofficial - 2.12.2013 ) Dropped Support
Detailed Instructions on How To Install Here
Credits: @mustbepbs
3rd - Philz Touch
Detailed Instructions on How To Install Here
Credits: @Phil3759
Note: Some user reported that flashify can also be used to back stock recovery and also to flash both custom recoveries
Curent Available Custom Roms
CMB ROM - RC2 - 4.4.2 ( Official - 12.12.2013 )
ROM Thread Here
Credits: @nycbjr / @Drgravy / @otisbartleh / @termleech
Click to expand...
Click to collapse
CM 11 - 4.4.2 Nightlies ( Official - 11.12.2013 )
ROM Thread Here
Credits: @dalingrin
Click to expand...
Click to collapse
AOKP 4.4.2 ( Unofficial - 12.12.2013 )
ROM Thread Here
Credits: @Drgravy
Click to expand...
Click to collapse
Paranoid Android - 4.4.2 ( Official - 10.12.2013 )
ROM Thread Here
Credits: @drgray
Click to expand...
Click to collapse
Slim Kat - 4.4.2 ( Unofficial - 10.12.2013 )
ROM Thread Here
Credits: @Demetris
Click to expand...
Click to collapse
Mahdi Rom 4.4.2 ( 25.12.2013 )
ROM Thread Here
Credits: @Moose0704
Click to expand...
Click to collapse
Carbon Rom 4.2.2 ( 24.1.2014 )
ROM Thread Here
Credits: @Demetris
Click to expand...
Click to collapse
Malladus 1.2.5 ( 5.1.2014 )
ROM Thread Here
Credits: @okibi
Click to expand...
Click to collapse
LRS G PAD ( 23.1.2014 )
ROM Thread Here
Credits: @letschky
Click to expand...
Click to collapse
Current Availabe Custom Kernels - 2 Many More To Come :b
Gpe-ish kernel
Kernel Thread Here
Credits: @Demetris
Click to expand...
Click to collapse
dyn. Kernel r2
Kernel Thread Here
Credits: @reborn90
Click to expand...
Click to collapse
How To Return To Stock Rom?
1st Method - Details Here Credits: @hyelton
2nd Method
- Install LgMobile Support Tool
- Do An Upgrade Recovery and It Will Remove Root and Update Your FW To The Latest Available
Click to expand...
Click to collapse
Detailed Instructions Here
Stock Kernel And Recovery
- Flash Them Using Flashify
Click to expand...
Click to collapse
Stock Kernel img file: http://sdrv.ms/1aNYDXc
Stock Recovery img file: http://sdrv.ms/1aNYLWD
Key Combinations
Factory Reset Mode
- With Device Powered Off And Unplugged
- Press and hold Power Button + Volume Down
- When the LG logo shows up, release the power button only
- Now press and hold the Power and Volume Up button while keeping your hold on the Volume Down button
- When the factory reset screen appears, release your hold on all buttons
- Follow On Screen Indications
Click to expand...
Click to collapse
Download Mode
- With Device Powered Off And Unplugged
- Press and hold Volume Up + Volume Down
- Now Plugg In USB Cable
Click to expand...
Click to collapse
Recovery Mode
Warning - Only Latest TWRP and CWM support boot to recovery on stock recovery and previous versions of twrp youll ended up erasing all your data
- Press and hold Power Button + Volume Down
- When the LG logo shows up, release the power button only
- Now press and hold the Power and Volume Up button while keeping your hold on the Volume Down button
- When the factory reset screen appears, release your hold on all buttons
- And Select Up and Up Again
Click to expand...
Click to collapse
And Thats It ... as soon as more things appear or current things get updated also this thread will!
nice thread! keep up your good work by updating it often!
katsika said:
nice thread! keep up your good work by updating it often!
Click to expand...
Click to collapse
Thanks for starting this thread. Eagerly awaiting my Gpad from Newegg's Monday deal.
Great work! Thanks for setting this up. I just received my G Pad today and I'm in the process of setting it up right now. You're guide is right on time!
Great to see a thread like this thanks for the great work
Sent from my LG-V500 using xda app-developers app
thanks for the repo and job. :good:
I tried to run Titanium backup and it says I am mot rooted. I know I am rooted because I see that Superuser is installed now
Why are you quotting the whole post?
That's very unnecessary and it makes the thread unpleasant to read
Install supersu and update binary and please do not quote de the whole post :b
Enviado do meu GT-I9300 através de Tapatalk
Ver3go said:
Install supersu and update binary and please do not quote de the whole post :b
Enviado do meu GT-I9300 através de Tapatalk
Click to expand...
Click to collapse
When I open Supersu, it says, there is no SU binary installed and SuperSU cannot install it
kevman8396 said:
When I open Supersu, it says, there is no SU binary installed and SuperSU cannot install it
Click to expand...
Click to collapse
Re-root it
Enviado do meu GT-I9300 através de Tapatalk
Don't know if it was already mentioned...
NTFS
By default only pens/sdcards in fat32 are supported by LG GPad.To use USB pens in NTFS you just need to have root and use USB OTG Helper (image).
Reboot in safe mode
Long press power off (image)
slowdyve said:
Reboot in safe mode
Long press power off (image)
Click to expand...
Click to collapse
This doesnt work in my gpad, i tried it and it just restarts my tablet. Does it work for you?
katsika said:
This doesnt work in my gpad, i tried it and it just restarts my tablet. Does it work for you?
Click to expand...
Click to collapse
Yes. It shows on the left bottom of the screen a small warning that is in safe mode.
Sent from my LG-V500 using Tapatalk 4
thanks
Thanks for the helpful post, just got my gPad and its awesome so far. I used to be all into jailbreak iOS but new to android and so far I don't even see a reason to root for now, but Im sure I will hear of good reasons to later on!
Deleted
09/12/2013
- Added Stock Recovery and Kernel to OP
- Added Key Combos How To
------------------------------------------------------------------------------------------------------------------------------
And want to say that requested Phil to port his amazing touch recovery for our device.
Great. Thanks a lot for this fantastic work.:good:
Thread Updated WIth Latest Updates!
thz
Related
I am not the real developer of insertions. Simply wanted to show that it is possible. Very much it would be desirable to see the new MIUI version on our smartphone
For developers only
MIUI4.0.4 2.7.20 failed to start on the basis of [ROM] [Early pre-alpha] AOSP ICS 4.0.4_r2.1 for DS5.kibuuka
The new wersion MIUI 4 2.7.20 hir:http://filestore.com.ua/?d=B3B5A9749
Russian is added. Stability of a.kamer is improved doesn't work
The big request to all who can finish this insertion, make it efforts
Sorry for bad english, thanks to online translation
For an insertion it is used Google Nexus One rom :http://roms.miui.us/passion/MIUI.us_passion_v4_2.6.22_Eng_Deo_ZipA_Signed_buildbot.zip
The new version works almost everything:to look the 34 th post
USB Mass Storage for ICS (that doesn't have native UMS support (yet))version 1.2:http://forum.xda-developers.com/showthread.php?t=1389375
new
Following version of an insertion:http://uafile.com.ua/get/33295/
speed is increased,the new basis and the new MIUI version, Is rut
I will download and flash to let everyone how it runs. Thanks, Liwais.
Liwais said:
Following version of an insertion:http://uafile.com.ua/get/33295/
speed is increased,the new basis and the new MIUI version, Is rut
Click to expand...
Click to collapse
The first build hv no phone.apk, wifi not work and no data, how then this build ? Can you provide more changelog details ? It is good hv MIUI v.4 running on our device. Thank you
Sent from my PC36100 using Tapatalk 2
Still running 2.4.20 MIUI... was tempted to try ICS but now seems everyone is looking toward to Jelly bean. Only feature I care about in Jelly Bean was the voice actions.
Other than that I'll take MIUI any day.
nom051205 said:
The first build hv no phone.apk, wifi not work and no data, how then this build ? Can you provide more changelog details ? It is good hv MIUI v.4 running on our device. Thank you
Sent from my PC36100 using Tapatalk 2
Click to expand...
Click to collapse
In this version speed and graphics not to be strewed is better. Thanking new build from kibuuka
In this version too there is no phone, but the Wi-Fi works at both versions that the Wi-Fi would work it is necessary to include it in settings and to press to scan in the bottom of page, and I have to work with data, phone it is possible to establish from a market for example TouchPal Contacts.В to an assembly basis new буилд [ROM] [Early pre-alpha] of AOSP ICS 4.0.4_r2.1 for DS5. (dell_streak-ota-eng.den.070212) and new MIUI Google Nexus One MIUI.us_passion_v4_2.6.29_Eng_Deo_ZipA_Signed_buildbot version.This version already with рут the rights .Who can force to work apk and launcher apk phone a request to help!!
Excuse for my English and thanks to all
For shutdown of illumination of keys and brightness control of the screen to use the appendix:https://play.google.com/store/apps/details?id=mobi.pruss.superdim&hl=ru
streak4m3 said:
I will download and flash to let everyone how it runs. Thanks, Liwais.
Click to expand...
Click to collapse
Please. Write the opinion) I won't refuse any help in MIUI construction
The new version works almost everything
The new version works almost everything, phone, a native launcher, subjects, a market, and is a lot of another, we test and we write responses
download:http://uafile.com.ua/get/33693/
MIUI4.0.4 2.6.29 Dell Streak-Hot thing
http://narod.ru/disk/55304535001.9765abc6af956166f4cc913155ba2318/MIUI.us_DELL%20STREAK%205_v4_2.6.29.zip.html
Liwais said:
The new version works almost everything, phone, a native launcher, subjects, a market, and is a lot of another, we test and we write responses
download:http://uafile.com.ua/get/33693/
MIUI4.0.4 2.6.29 Dell Streak-Hot thing
Click to expand...
Click to collapse
How about mobile data and camera?
sinan33 said:
How about mobile data and camera?
Click to expand...
Click to collapse
the camera doesn't work, Wi-Fi works, Data works for me
ı can not download the file
When i click on download it begins to download a file called "download.bin"
sinan33 said:
ı can not download the file
When i click on download it begins to download a file called "download.bin"
Click to expand...
Click to collapse
put a tick slightly below the button to download
added the reference still
Thank you!
I am downloading now.
Looks good! Seems to have the same bugs as the other ICS ROM, but a great start nonetheless!
Liwais,
Good work, man. This latest ROM is definitely better than previous ones. Aside from the typical things that are not working, like camera, for example, the transitions and response is considerably better but obviously not ready for extensive daily use just yet. I will provide more detailed report later on. But just wanted to say "thank you" for your hard work.
Hello
Hello guys... i wanna know how to install this rom. via streakmod recovery ? or what ? pls tell me step by step procedure to make a flashing on this DS 5.
Yes, using StreakMod recovery.
1) Do a Nandroid backup.
2) Clear Dalvik, Cache and Factory Reset from StreakMod.
3) Factory reset from main recovery menu. This step isn't always necessary, but doesn't hurt.
4) Flash this zip. Also flash gapps and superuser.zip from the other ICS thread for Google Apps and root.
5) Reboot and enjoy ICS MIUI!
Sent from my Dell Streak using Tapatalk 2
Edrill said:
Yes, using StreakMod recovery.
1) Do a Nandroid backup.
2) Clear Dalvik, Cache and Factory Reset from StreakMod.
3) Factory reset from main recovery menu. This step isn't always necessary, but doesn't hurt.
4) Flash this zip. Also flash gapps and superuser.zip from the other ICS thread for Google Apps and root.
5) Reboot and enjoy ICS MIUI!
Sent from my Dell Streak using Tapatalk 2
Click to expand...
Click to collapse
Also don't forget to flash the correct version of radio and baseband if you are coming from Froyo..
???
ncik said:
Also don't forget to flash the correct version of radio and baseband if you are coming from Froyo..
Click to expand...
Click to collapse
where to download ???
Thanks Mate !
Edrill said:
Yes, using StreakMod recovery.
1) Do a Nandroid backup.
2) Clear Dalvik, Cache and Factory Reset from StreakMod.
3) Factory reset from main recovery menu. This step isn't always necessary, but doesn't hurt.
4) Flash this zip. Also flash gapps and superuser.zip from the other ICS thread for Google Apps and root.
5) Reboot and enjoy ICS MIUI!
Sent from my Dell Streak using Tapatalk 2
Click to expand...
Click to collapse
Thanks for ur reply.
I got a DS 5 from my bro yesterday and i want to flash ROMs on it.
But i still don't know after i've finished ROMs on Ds 5 , is it easy to downgrade or move back to the official ROMs?
Firstly i got this one in 2.2 and now i got updated to 2.3.3 from other xda thread. So Pls answer me whether i should try flashing these ROMs or not ? Any help appreciated..! :laugh:
[Windows APP][I9070] --| TerminalKernel Beta 0.3 & Siri Settings |-- Flash JB Kernels
So guys this program might result kind of useless, still i had some free time and wanted to do something for all the owners of I9070.
This program only works with Windows and I9070!
So basically what does it do?
kernel Installing in the easiest way!
A little Quick Video on how Terminal Kernel Works!
http://youtu.be/fQs0ZwHneTo
Welcome Screen ----> Click Terminal Kernel
Select the Kernel
Select the Push Button
Select the Flash Button
That's IT!
With a new functionality now you can Activate or Deactivate Siri Kernel's features! Wifi Boost and Sound Boost!
I plan on adding Automatic Logcat retrieve etc so that EVERYONE will be able to help our developers EASILY!
Feedbacks would be welcome!
REQUIREMENTS :
Usb Debug ON
(Settings ---> Developer Option ---> Activate ----> Debug Usb)
Rooted Phone Thanks Shaaan!
Shaaan's Root Method for JB
.Net Framework 4.0
Net Framework 4.0
The kernel MUST be flashable from Terminal Emulator (Thunderzap, Siri Kernel and Cocore E)
That's IT!
Download is in NEXT TOPIC (Changelog)!!!
CHANGELOG
Beta 0,3b
Not many changes here really, just code rivisited
Download 0.3b
Beta 0.3
Some stability improvements Added Siri Settings functionality! Now you can switch siri's features on and off! Let me know how it goes guys, bugs are always around the corner!
Beta 0.2.6
Ok should be fixed the problem that papski2 had , but this is a Temporary Build.. With this i mean, you wont see any confirm of the flash, the confirm will be the Phone that Reboots! I'm sleepy and i don't have time to do more testing since i have to wake up early to go to work.. so guys See you tomorrow night!
Beta 0.2.4
Ok i should've fixed a little bug... And i've added Logs Reports! If anything goes wrong please send me the log i would really appreciate it!
Beta 0.2.3
A few more flash performance improvement, now this is a multithreaded app My first multithreaded application Beware guys! No more hangs!
Beta 0.2
Some performance improvement, now takes less time to flash
I guess this is Stable Enough to call it a Beta !
V0.1c
Changed layout, added some info, Soon there'll be a nice tool as well in here
V0.1b
BugFixing, no more Hangs at Flashing of the Kernel i hope!
V 0.1
Initial Release, Alpha build for testing purposes.
WOW!
So We can change kernels easily from PC? Sounds good!
not work for me, stuck after click "Flash This Da*n Kernel"
Re: [Windows APP][I9070] --| TerminalKernel |-- Flash JB kernels from WINDOWS!
To do this , is it necessary that the phone should be switched on. Coz when I flashed a kernel using phone I get in to a bootloop ( stuckb on splash screen)....so can this help.
Sent from my GT-I9070 using xda premium
fongandy said:
not work for me, stuck after click "Flash This Da*n Kernel"
Click to expand...
Click to collapse
Yeah sorry about that, that's a known bug.. uhm... perhaps i should let the user manually reboot his phone.. it's the "adb shell reboot" command that is giving me this issue actually...
Anyway if your phone rebooted you should've flashed it successfully!
atishey23 said:
To do this , is it necessary that the phone should be switched on. Coz when I flashed a kernel using phone I get in to a bootloop ( stuckb on splash screen)....so can this help.
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Ye... the phone must be switched on and with usb debug enabled.. Uhm that's pretty weird, give it a shot .
Logen91 said:
WOW!
So We can change kernels easily from PC? Sounds good!
Click to expand...
Click to collapse
As long as the Kernel can be flashed via Terminal Emulator YES!
Yeah i have to add that to the first post...
Someone could please give me some feedbacks? I need it to improve the program! xD
Chry_Gigio said:
Someone could please give me some feedbacks? I need it to improve the program! xD
Click to expand...
Click to collapse
Flashed kernel with your application. Just that "Non responding" is little confusing. But you said it will be fixed.
Otherwise all fine.
Q: Where is kernel file pushed? What folder on phone?
shut_down said:
Flashed kernel with your application. Just that "Non responding" is little confusing. But you said it will be fixed.
Otherwise all fine.
Q: Where is kernel file pushed? What folder on phone?
Click to expand...
Click to collapse
Thank you shut_Down that's exactly what i needed a tester for I uploaded another version (0.2.1)... with Non responding you mean that it completely hangs and you have to kill the process? or just that during the flash it hangs? I mean.. do you see the MessageBox that says : "Everything should be fine"?
They are pushed on mtn/sdcard Internel Card... Though if needed i could place it pretty much everywhere..
Chry_Gigio said:
Thank you shut_Down that's exactly what i needed a tester for I uploaded another version (0.2.1)... with Non responding you mean that it completely hangs and you have to kill the process? or just that during the flash it hangs? I mean.. do you see the MessageBox that says : "Everything should be fine"?
They are pushed on mtn/sdcard Internel Card... Though if needed i could place it pretty much everywhere..
Click to expand...
Click to collapse
Not, thats where I put kernels to test. Just wanted to know.
And no, it do not hang. It is just untill flashing is finished. I do see "Everything should be fine", and kernel is flashed. After phone start to reboot app is responding normaly. :good::good::good:
V 0.2.1. is working same, flash went fine. Just it has that Not responding too. It is not problem, just not to pay attention on it.
shut_down said:
Not, thats where I put kernels to test. Just wanted to know.
And no, it do not hang. It is just untill flashing is finished. I do see "Everything should be fine", and kernel is flashed. After phone start to reboot app is responding normaly. :good::good::good:
Click to expand...
Click to collapse
Ok so i have to create a separate Thread in order to handle the flash without hang... Uuuhm.. then i'll upload another version that puts it in sdcard/TerminalKernel
Chry_Gigio said:
Ok so i have to create a separate Thread in order to handle the flash without hang... Uuuhm.. then i'll upload another version that puts it in sdcard/TerminalKernel
Click to expand...
Click to collapse
Ok. And this could be very helpfull, because last few days I flashed a lot of kernels for testing. :good: :good: :good:
With this will be - download kernel, open app, select kernel, flash - done.
shut_down said:
Ok. And this could be very helpfull, because last few days I flashed a lot of kernels for testing. :good: :good: :good:
With this will be - download kernel, open app, select kernel, flash - done.
Click to expand...
Click to collapse
Ok! Anf anf... Now the kernels go into /mnt/sdcard/TerminalKernels/
This is now a Multi-Threaded application so it wont hang anymore
Sorry for going off-topic but can you please tell me how you made this app? I don't want to make or copy your app just want to make an app.. I want to impress my friends and my teachers on my College by making an app similar to this...
Did you use Visual Basic and C++ by any chance... because it looks like that..
I got a problem, i got debug usb mode on but still program says that i don't have it turned on and when i connected phone to PC it still shows on notification bar that it's multimedia mode or something like this. JB XXLPZ + deodex
papski2 said:
I got a problem, i got debug usb mode on but still program says that i don't have it turned on and when i connected phone to PC it still shows on notification bar that it's multimedia mode or something like this. JB XXLPZ + deodex
Click to expand...
Click to collapse
Pull down notification and tap on that. Choose MTP.
shut_down said:
Pull down notification and tap on that. Choose MTP.
Click to expand...
Click to collapse
This is MTP also i tried both options and still not working
R: [Windows APP][I9070] --| TerminalKernel Beta 0.2.3 |-- Flash JB kernels from WINDO
Just got out of work, will answer you ASAP. Which os are you using?
Sent from my GT-I9070 using xda app-developers app
Windows 7 x64, just uninstalled Samsung drivers and installed naked ones, still nothing
R: [Windows APP][I9070] --| TerminalKernel Beta 0.2.3 |-- Flash JB kernels from WINDO
Ok just to make sure, your phone is rooted right? As soon as I get home I'll include a log section in the program and will upload the new one, if you can wait until tonight so that u can send me the log I would appreciate it
Sent from my GT-I9070 using xda app-developers app
Hello there awesome people of xda, this is the discussion thread for Omni Rom for i9100. I decided to make this topic because of the spam that is on the development thread.
NOTE THAT BY FLASHING OMNI ROM OR ANY OTHER FORM OF CUSTOM FIRMWARE, RECOVERY YOUR WARRANTY IS VOIDED. I, MYSELF OR ANY OTHER MEMBER OF OMNI, TWRP, AOSP ARE NOT RESPONSIBLE FOR ANY DAMAGE YOU MAY CAUSE TO YOUR DEVICE. READ THE INSTRUCTIONS AND NOTE ALSO THAT YOU WILL FLASH THIS CUSTOM FIRMWARE AT YOUR OWN RISK.
Click to expand...
Click to collapse
Good ROM, except some kernel issues in latest nightlies.
so what's the difference between this Rom and say CM 11 or PA?
is it features only or it's based on a different source?
xman323 said:
so what's the difference between this Rom and say CM 11 or PA?
is it features only or it's based on a different source?
Click to expand...
Click to collapse
is not ported, its based on AOSP and also has futures like multiwindow, app swich etc.
Great ROM, been using since it first came out and using every update as available!
I wasn't one of the lucky ones where the new nightlies work, is there any update on what's causing the issues and when this will be sorted?
Thanks
Just seen the thread trying to find the issue, so don't bother answering that question!
Where can I find the battery icons
In battery.
Envoyé de mon GT-I9100 en utilisant Tapatalk
torned said:
In battery.
Envoyé de mon GT-I9100 en utilisant Tapatalk
Click to expand...
Click to collapse
thanks that save me some time
Does Camera Work okay?
Hi, does the front facing camera recording work. Also is the camera slow to take pictures?
Easily one of the best custom ROM for our old S2. Really love the multi-windows feature.
issues
i have an issues
when i try to install the recovery 6.0.4.5 i got "installation aborted" message at the end
mine is 6.0.2.7 and it won't install the rom unless i update it to 6.0.4.5
i tried other links for the 6.0.4.5 it did install in the recovery mood bt when i rebort the system my phone will lag in the samsung logo
and when i try to go to recovery mood it didn't go it just stuck in the logo
so i went back to odin to install 6.0.2.7 again and the phone worked
i also found a "tar" version for 6.0.4.5 to install it in odin
bt when i did i got a root message and stuff i didn't understand so i shut it down and went back to 6.0.2.7 again
anyone with the same problem ?
sorry for my bad english i am not that good
bt well i tried D:
Latest nightly builds must be perfect. Haven't seen anyone post here for ages, unless there is a new thread for the i9100 international?
Sent from my GT-I9100 using xda app-developers app
I Love It!
Great rom. thx Omni Team.
is there any way to turn off the light of menu & back key?
k4mr4n94 said:
Hi, does the front facing camera recording work. Also is the camera slow to take pictures?
Click to expand...
Click to collapse
works
soma47 said:
i have an issues
when i try to install the recovery 6.0.4.5 i got "installation aborted" message at the end
mine is 6.0.2.7 and it won't install the rom unless i update it to 6.0.4.5
i tried other links for the 6.0.4.5 it did install in the recovery mood bt when i rebort the system my phone will lag in the samsung logo
and when i try to go to recovery mood it didn't go it just stuck in the logo
so i went back to odin to install 6.0.2.7 again and the phone worked
i also found a "tar" version for 6.0.4.5 to install it in odin
bt when i did i got a root message and stuff i didn't understand so i shut it down and went back to 6.0.2.7 again
anyone with the same problem ?
sorry for my bad english i am not that good
bt well i tried D:
Click to expand...
Click to collapse
use a kernel that comes with a recovery like Dorimanx
hoschool2 said:
is there any way to turn off the light of menu & back key?
Click to expand...
Click to collapse
there should be an options in the Settings, Buttons or smth like that.
Camera pic to external sd
I like this ROM, Thanks for the Team.
How to set default location of camera to external sd.
moula1981 said:
I like this ROM, Thanks for the Team.
How to set default location of camera to external sd.
Click to expand...
Click to collapse
is hould be an option in the camera app
When multi window implement in omni kat ROM. Someone patch this to use http://forum.xda-developers.com/showthread.php?t=2567667
Sorry, this thread is now closed.
I would suggest you to move this thread to the General Disucssion section
Moved.
well I think I found a bug so twrp thinks there is no os installed and the browser doesnt work and when you try to flash gapps for 7.1 it doesnt work how do we fix this
williambright80 said:
well I think I found a bug so twrp thinks there is no os installed and the browser doesnt work and when you try to flash gapps for 7.1 it doesnt work how do we fix this
Click to expand...
Click to collapse
For which ROM u talking about?? Aosp espressos'
Kunal Gautam said:
For which ROM u talking about?? Aosp espressos'
Click to expand...
Click to collapse
yes
TWRP :-OK it isn't that severe to be called a bug
GApps:- I know its a problem with the ROM that it doesn't deal with opengapps but still you can try PA GApps they are working fine with the ROM.
Thanks
Kunal Gautam said:
TWRP :-OK it isn't that severe to be called a bug
GApps:- I know its a problem with the ROM that it doesn't deal with opengapps but still you can try PA GApps they are working fine with the ROM.
Thanks
Click to expand...
Click to collapse
which gapps
link me to 7.1 ROM you promised, ty.
Boscep said:
link me to 7.1 ROM you promised, ty.
Click to expand...
Click to collapse
here is the link to 7.1 https://builds.unlegacy-android.org/aosp-7.1/espresso/ua_espresso-7.1.1-20170227.zip
Is this for pad 2 gt-p5100
JPSimon said:
Is this for pad 2 gt-p5100
Click to expand...
Click to collapse
Yes but to avoid confusion please call it by galaxy tab 2 10.1
hello @CCD
how are you?
comeback pls
tab 2 needs more dev, ty.
UPDATE 2.0
Builds are almost ready CM 14.1 once my exams are completed will start to test them.... Dont know why but still camera bug carry on almost no lags..... + CyanogenMod Features....
JPSimon said:
Is this for pad 2 gt-p5100
Click to expand...
Click to collapse
It could be but right now i haven't updated my device tree
For P3100's right now but i will do it soon but it could be faster if you could help me updating
williambright80 said:
which gapps
Click to expand...
Click to collapse
Sorry my mistake PA Gapps are now discontinued instead of them you could download dynamic gapps
Link-https://forum.xda-developers.com/android/software/gapps-dynamic-gapps-t3487192
Kunal Gautam said:
Introduction
At the end of 2016 I started to seek nougats for Tab 2, found AOSP by Ziyan and Android - Andi
flashed it, examined it, Discontinued it......
Here we gonna discuss it.
What is the need?
Tab 2 was released in 2012 and in mid 2014 was discontinued by Samsung thus resulted to get this to be called OLD but in my eyes its still new with great potential and great reliability so I just want to keep this device alive till 2019. So that's the reason....
CURRENT STATE
Nougat development is doing well and with the help of you I can or all devs can make it better.....
So just because of this learned porting and started porting, successfully ported 4 out 5 ROMs will upload them all......
DEVELOPING CIRCLE
Roms that are being supported by me are :-
AOSP
Lineage OS
AICP
Resurrection Remix
Thanks To @[email protected]
SlimKat Roms
CyanogenMod
LineageOS
You
Me of course
Click to expand...
Click to collapse
So hey, i'm nee to this forum and rooting in general but i will glad if some of you could help me out of this, here's the deal: i saw that AOSP roms are the best for performance (right?) and i also want the lastet version of android so that rom fit perfectly my needs, where i can download it? And is compatibile with my tab 2 10.1 WiFi only? Also where the hell is the guide to root that Device, i saw it once and i never found it back... (yeah i'm probably stupid)
LordReaperIV said:
So hey, i'm nee to this forum and rooting in general but i will glad if some of you could help me out of this, here's the deal: i saw that AOSP roms are the best for performance (right?) and i also want the lastet version of android so that rom fit perfectly my needs, where i can download it? And is compatibile with my tab 2 10.1 WiFi only? Also where the hell is the guide to root that Device, i saw it once and i never found it back... (yeah i'm probably stupid)
Click to expand...
Click to collapse
No need for guide
Steps
1. Download KingRoot.
2. Install it.
3. Root your device with it.
4. Enjoy
TO INSTALL CUSTOM RECOVERY TO INSTALL CUSTOM ROMS
1. Download official TWRP app from the Play Store.
2. Install recovery using the information on the screen.
INSTALL THE MODDED RECOVERY PLZ IF YOU DONT WANT TO GET YOU DEVICE BRICKED
1. Go to google search andi github
2. Open it
3. Go to the recovery section and then in TWRP download the common recovery and install the downloaded recovery using the current TWRP recovery
And AOSP are good but actually for Tab 2 it is really unstable right now. But if you really want to install it
Just go in the Tab 2 Development section
The AOSP must on top there will be links to the website
Just go to directory when you visit downloading website
AOSP 7.1/espresso/Download the latest one
And just copy to you device
Then go to the recovery (Power + Volume Up)
Then go into wipe/anvanced
Select
1. DALVIK
2. CACHE
3. SYSTEM
4. DATA
Then wipe
Then install the Rom
TADA Done than just reboot.
Kunal Gautam said:
No need for guide
Steps
1. Download KingRoot.
2. Install it.
3. Root your device with it.
4. Enjoy
TO INSTALL CUSTOM RECOVERY TO INSTALL CUSTOM ROMS
1. Download official TWRP app from the Play Store.
2. Install recovery using the information on the screen.
INSTALL THE MODDED RECOVERY PLZ IF YOU DONT WANT TO GET YOU DEVICE BRICKED
1. Go to google search andi github
2. Open it
3. Go to the recovery section and then in TWRP download the common recovery and install the downloaded recovery using the current TWRP recovery
And AOSP are good but actually for Tab 2 it is really unstable right now. But if you really want to install it
Just go in the Tab 2 Development section
The AOSP must on top there will be links to the website
Just go to directory when you visit downloading website
AOSP 7.1/espresso/Download the latest one
And just copy to you device
Then go to the recovery (Power + Volume Up)
Then go into wipe/anvanced
Select
1. DALVIK
2. CACHE
3. SYSTEM
4. DATA
Then wipe
Then install the Rom
TADA Done than just reboot.
Click to expand...
Click to collapse
Awesome dude, thanks for the tips, i'll wait that my tabet charge will be over 80% (just for safety) and the i'll root it. I downloaded both ".tar.md5" and ".zip" file but when i go to choose the file with TWRP in the directory that i put them, the app explorer don't see them... -> update, the TWRP app let me see only the 2..8.5.0 version of recovery, while the site on github start from 3.x.x.x. also i tried to flash the img files extracted from the 3.x.x.x. recoveries and it told me "flash failed".
Also my Galaxy Tab 2 just crashed while rooting with Kingroot (it was trying the could method) -> EDIT: i reset it and when i open the kingroot app it start from where it left , it was a "crash" because the stock rom have not the reboot function?
BTW i thought, you said that galaxy tab 2 is unstable, but i remember that the first stock rom was very well optimized with no lag, then i updated it via samsung and then it come to lag and IT IS VERY SLOW. so you mean that installing a custom rom will not solve the problem?
[b]"need alpha testers for cm 14.1"[/b]
Alpha testers wanted for CM 14.1
1st Build releasing today.. Stay Tuned!!!
Hi all. I'm a developer from SmokeTeam.
We a porting new kernel 3.10.96(latest for shieldtablet) and we will write here the development progress.
When the kernel becomes stable, we also give a link to the kernel source.
Thread with the firmware will unfortunately not be on xda, but you can find it on official miui forum after we make wi-fi work.
in kernel work:
Video
Sound
Touchscreens
Charger
Battery
LCD display
Android:
Video HW
3D/2D graphics
Vulkan API
Sound
Touhcscreens
All that is not specified - does not work for this moment.
DbIm4pda said:
Hi all. I'm a developer from SmokeTeam.
We a porting new kernel 3.10.96(latest for shieldtablet) and we will write here the development progress.
When the kernel becomes stable, we also give a link to the kernel source.
Thread with the firmware will unfortunately not be on xda, but you can find it on official miui forum after we make wi-fi work.
in kernel work:
Video
Sound
Touchscreen's with buttons
Charger
Battery
LCD display
Android:
Video HW
3D/2D graphics
Vulkan API
Sound
Touhcscreen
All that is not specified - does not work for this moment.
Click to expand...
Click to collapse
I know that you did say that " All that is not specified - does not work for this moment " but just to clarify I am asking the question - are the sensors working ??
Btw, AWESOME work !!! You guys (and all those who have helped you) are the best !!!
hell1134 said:
I know that you did say that " All that is not specified - does not work for this moment " but just to clarify I am asking the question - are the sensors working ??
Btw, AWESOME work !!! You guys (and all those who have helped you) are the best !!!
Click to expand...
Click to collapse
The sensors do not fully work. But in the end everything will work, except cameras.
Thanks for making this thread
DbIm4pda said:
The sensors do not fully work. But in the end everything will work, except cameras.
Click to expand...
Click to collapse
camera is not fixable?
AbhaYsinGH007 said:
Thanks for making this thread
You're welcome
camera is not fixable?
Click to expand...
Click to collapse
In the kernel maybe we make camera work, but in the android camera not fixable.
WiFi and Bluetooth now works
It means We are going to get the build soon
Awesome,. just registered to say thanks for your hard work :good:
This benchmark was shared by smoke developers on telegram group
I'm just sharing
Awesome :victory:
DbIm4pda said:
Hi all. I'm a developer from SmokeTeam.
We a porting new kernel 3.10.96(latest for shieldtablet) and we will write here the development progress.
When the kernel becomes stable, we also give a link to the kernel source.
Thread with the firmware will unfortunately not be on xda, but you can find it on official miui forum after we make wi-fi work.
in kernel work:
Video
Sound
Touchscreens
Charger
Battery
LCD display
Android:
Video HW
3D/2D graphics
Vulkan API
Sound
Touhcscreens
All that is not specified - does not work for this moment.
Click to expand...
Click to collapse
Hey bro any update of the shield kernel?
Btw awesome work??
We fix OTG and Wi-Fi, but kernel is not stable, in reboot to recovery or bootloader tablet do not reboot and you can reset tablet only if press power button 20 or more seconds, and press ppwer button again for power on.
DbIm4pda said:
We fix OTG and Wi-Fi, but kernel is not stable, in reboot to recovery or bootloader tablet do not reboot and you can reset tablet only if press power button 20 or more seconds, and press ppwer button again for power on.
Click to expand...
Click to collapse
Is sd card working properly ?
hell1134 said:
Is sd card working properly ?
Click to expand...
Click to collapse
I talk about it? No.
SDcard not working.
DbIm4pda said:
We fix OTG and Wi-Fi, but kernel is not stable, in reboot to recovery or bootloader tablet do not reboot and you can reset tablet only if press power button 20 or more seconds, and press ppwer button again for power on.
Click to expand...
Click to collapse
Sounds good.:laugh:
DbIm4pda said:
We fix OTG and Wi-Fi, but kernel is not stable, in reboot to recovery or bootloader tablet do not reboot and you can reset tablet only if press power button 20 or more seconds, and press ppwer button again for power on.
Click to expand...
Click to collapse
Any release date or beta testing? Can help
Now What about stability of kernel ?
Hey bro can u plz share ur links for the latest smoke lineage rom with nvidia shield blobs and twrp recovery to use with that rom?
I have flashed the rom but it reboots again and again. What else should I flash?
Way Shincheng said:
I have flashed the rom but it reboots again and again. What else should I flash?
Click to expand...
Click to collapse
You must follow what is explained in the spoiler 'Instructions' and then flash the new firmware.
https://4pda.ru/forum/index.php?showtopic=632766&st=11880#entry65831492
Palm Trees said:
You must follow what is explained in the spoiler 'Instructions' and then flash the new firmware.
https://4pda.ru/forum/index.php?showtopic=632766&st=11880#entry65831492
Click to expand...
Click to collapse
I too am facing reboot problem. The instructions mentions - "Flash Bootloader, Nvtboot, tos.img and TWRP recovery". However I'm unable to download the same as it return 404 error. So I have flashed official TWRP 3.1.1.0 for mocha (downloaded from twrp.me website). After that I have wiped all and flashed the ROM & Gapps. But, on rebooting, after the MI logo, the LOS boot logo is shown for a few minutes and then it reboots again & again.
Update 1 : I was using the last smoke LOS 14.1 ROM (with nexus 9 blobs) before I flashed the new one.