Hi guys !!! i have wickedleak wammy note !! i rooted this phone using SRSroot software !! i need custom rom for this one and i want to upgrade my ics to jelly bean !! plz help !! THANKS in ADVANCE !!
Manufacturer: alps
Model: e1808_v75_jbl1_5640
Android Version: 4.0.4
Build ID: ALPS.ICS.MP.V1.11
Board ID: e1808_v75_jbl1_5640
RAM: 512 MB
core : single (1)
hardwre : mt6575
cpu : ARMV7 (vfpv3,neon)
GPU: powervr sgx 531
frequency :1200MHZ (max)
resolution : 480*800
density : 240 dpi
multitouch : 5 point
android : 4.0.4
sdk version :15 (android 4.0.3)
kernel : linux version 3.0.13([email protected])(gcc version 4.4.3 (gcc) #1 PREEMPT mon jul 30 16:31:45 CST 2012
Your gonna be hard pressed to find anything for that device at all. It has only the bare minimum ram to run Android and that OEM has not released the kernel source code for the device so until that happens you are out of luck
Wayne Tech Nexus
Prabhu ji next time dont buy a mtk based phone in india... No matter which company like micromax / intex / bla blah never realeses any sources...no compliance to gpl.. So buying such a phone and expecting lots of custom roms is bad... Although canvas series have few custom roms ...they are stock based....
Yeah. While the Oppo R819 means there is hope for custom firmware on MTK devices, even with Oppo's help, MTK devices are a freaking nightmare.
Related
Hi,
I cant connect my phone as a media device and found that my mtp driver has problem...not installed properly...can anyone send me the link to get the driver.. below is my phone specification
Model- GT-I9500
Android 4.2.2
Baseband- MAUI.11AMD.W12.22.SP.V17.2013/05/08 11.12
Kernel- 3.0.13 1313 V17 MON JUN 10 20.09:41 CST 2013
Build no- JDQ39.I9500ZHUAMDE
Custom Build- 1370866190
Test by Genuine galaxy s4/s3/note 2
cpu frequency-1890Mhz
Total Rom-502.96 MB
Total RAM- 1.82 Ghz
Screen resolution- 800*480
DPI-240
IMEI-358849974949841
Test by Quadrant standard-
SDK version-4.2.2
OS- Linux 3.0.13
Fingerprint- alps/Mobitek 75_ics 2/mobitek 75_ics 2:4.0.4/IMM76D/1370866190:user/test-keys
CPU- ARM v7 processor rev 10 (v71)
cores-4
GPU-
vendor-imagination technology
renderer- power VR SGX531
version- open GLES 2.0
test by rootchecker-
hardware- mt6575
Host- glzhong-desktop
ID-IMM76D Incremental -eng.root.1370866190
skymobi_project_taid xun01
antutu test(built-in the set)-
kernel- linux version 3.0.13 ([email protected])(gcc version 4.4.3 (GCC)#1 PREEMPT mon jun 10 20.09:41 CST 2013)
pls help me..i want to root my phone plus if possible to install a custom improved rom:crying::crying:
rahib203 said:
Hi,
I cant connect my phone as a media device and found that my mtp driver has problem...not installed properly...can anyone send me the link to get the driver.. below is my phone specification
Model- GT-I9500
Android 4.2.2
Baseband- MAUI.11AMD.W12.22.SP.V17.2013/05/08 11.12
Kernel- 3.0.13 1313 V17 MON JUN 10 20.09:41 CST 2013
Build no- JDQ39.I9500ZHUAMDE
Custom Build- 1370866190
Test by Genuine galaxy s4/s3/note 2
cpu frequency-1890Mhz
Total Rom-502.96 MB
Total RAM- 1.82 Ghz
Screen resolution- 800*480
DPI-240
IMEI-358849974949841
Test by Quadrant standard-
SDK version-4.2.2
OS- Linux 3.0.13
Fingerprint- alps/Mobitek 75_ics 2/mobitek 75_ics 2:4.0.4/IMM76D/1370866190:user/test-keys
CPU- ARM v7 processor rev 10 (v71)
cores-4
GPU-
vendor-imagination technology
renderer- power VR SGX531
version- open GLES 2.0
test by rootchecker-
hardware- mt6575
Host- glzhong-desktop
ID-IMM76D Incremental -eng.root.1370866190
skymobi_project_taid xun01
antutu test(built-in the set)-
kernel- linux version 3.0.13 ([email protected])(gcc version 4.4.3 (GCC)#1 PREEMPT mon jun 10 20.09:41 CST 2013)
pls help me..i want to root my phone plus if possible to install a custom improved rom:crying::crying:
Click to expand...
Click to collapse
Hello friend,
Can you send me your rom backup?
good day
I have a Chinese phone Star S7589 and would like to upgrade to android 4.4.2 Kitkat.
and Possible? which program to use?
thank you
Brand: Alps
Model: v89_jbl1a698
OS: 4.2.1
CPU model: MTK MT6589
GPU Renderer: PowerVR SGX 544MP
ROM: 8GB
RAM: 1 GB
Processor: Cortex-A7 CPU Quad Core 1.2GHz
Base Band Version: MOLY.RW8.1248.MD.WG.MP.V6.P42013
Kernel: 3.4.5root @ android
here u go
http://www.needrom.com/phone-roms/star/serial-s-star/s7589/
check this link
Sorry to resurrect an ancient thread, I have the same model as the op.
Is it possible you could direct me to the correct rom for this phone model that will install kitkat, please.
I have android wear that requires 4.3 and above to work and my phone is currently 4.2.1
Any help greatly appreciated.
Hi everyone, so i've ran into a bit of an issue with installing a custom recovery on my phone as it seems to be a rare variant... No one currently has any recoverys or ROMs that claim to work with this device so i guess ill have to do some trial and error and post my success if any, i need help tho *-*
specs: galaxy grand prime lte can SM-G530W (5.1.1)
Chipset: Qualcomm MSM8916 Snapdragon 410
Revision: r0p0
CPU: Quad-core 1.2 GHz Cortex-A53
GPU: Adreno 306
Bootloader : g530wvlu1aofb
Build ID: LMY47X.G530WVLU1AOFB
Java VM: ART 2.1.0
OpenGL ES: 3.0
Kernel arch.: armv7l
Kernel ver.: 3.10.49-5204010 (G530WVLU1AOFB)
Board: MSM8916
Hardware: qcom
Also, i am rooted
Custom Recovery
Hi,
I've recently been trying to port this device to AOSP 6.0/CM 13, and so far the best I have is a system that freezes at the Samsung splash screen. I am working on building TWRP as well, so I'll get back to this forum if I make any substantial progress in the effort.
vince2678 said:
Hi,
Hi everyone, so i've ran into a bit of an issue with installing a custom recovery on my phone as it seems to be a rare variant... No one currently has any recoverys or ROMs that claim to work with this device so i guess ill have to do some trial and error and post my success if any, i need help tho *-*
specs: galaxy grand prime lte can SM-G530W (5.1.1)
Chipset: Qualcomm MSM8916 Snapdragon 410
Revision: r0p0
CPU: Quad-core 1.2 GHz Cortex-A53
GPU: Adreno 306
Bootloader : g530wvlu1aofb
Build ID: LMY47X.G530WVLU1AOFB
Java VM: ART 2.1.0
OpenGL ES: 3.0
Kernel arch.: armv7l
Kernel ver.: 3.10.49-5204010 (G530WVLU1AOFB)
Board: MSM8916
Hardware: qcom .
Click to expand...
Click to collapse
I started a new thread here:
http://forum.xda-developers.com/grand-prime/general/rom-started-g530w-cm-12-1-custom-rom-t3422180
There you can find a link to a working CyanogenMod recovery image. It's nothing amazing like twrp, but it'll do the bare minimum without crashing (like the TWRP for G530H does on this device).
I also started compiling a custom rom, working somewhat. Again, all there on the link.
Hello, i have bought this HU yesterday..my problem is i try find the firmware or clue for change boot screen.
Please have me if you all get anything info about this unit. Below is detail from "About Phone".
Sorry for my bad English.TQ
Model Number : CAR AUDIO
Android Version : 5.1.1
Kernel Version : 3.4.67 Fri April 14 10:21:50 HKT 2017
Build Number : ALPS.LD_kk1.UI3.V1.6
MCU : SM92A1.170729.V1.1-JLY-B3
DVD : SM92A1.170228.V1.2-JLY-STP-860C-DIG
Specifications from the manual, which of course doesn't mention anything about FW updates!
CPU : MTK8127 (Mediatek MT8127 SoC) Quad Core Cortex A7 1.7Ghz
GPU : Mali400 400Mhz
RAM : 1GB DDR3
ROM : 16GB NandFlash
I've seen at least couple of colleagues experience lately whose first step to bricking their units (or just semi-bricking bringing them a lot of further "experience") was effort to change boot animation.
MCU for SM92
awarlock said:
Hello, i have bought this HU yesterday..my problem is i try find the firmware or clue for change boot screen.
Please have me if you all get anything info about this unit. Below is detail from "About Phone".
Sorry for my bad English.TQ
Model Number : CAR AUDIO
Android Version : 5.1.1
Kernel Version : 3.4.67 Fri April 14 10:21:50 HKT 2017
Build Number : ALPS.LD_kk1.UI3.V1.6
MCU : SM92A1.170729.V1.1-JLY-B3
DVD : SM92A1.170228.V1.2-JLY-STP-860C-DIG
Specifications from the manual, which of course doesn't mention anything about FW updates!
CPU : MTK8127 (Mediatek MT8127 SoC) Quad Core Cortex A7 1.7Ghz
GPU : Mali400 400Mhz
RAM : 1GB DDR3
ROM : 16GB NandFlash
Click to expand...
Click to collapse
Its similiar to my HU
I have an unbranded chinesse HU for my toyota. From keshangda electronics, the type of my HU KSD-JC6916B with MCU SM92E1, does anyone have update MCU?
Android version is 5.1.1 (i think is fake) because all file system is 4.4.2 kitkat
Sory for my bad english too...
Tx
David
Thank you for reading..!
I need your HELP...
Two months ago, I bought this product through Ali Express.
https://ko.aliexpress.com/item/1005001398982082.html?spm=a2g0o.productlist.0.0.15d56a2dSFEV31&algo_pvid=44ccbd11-2796-437a-bcd9-c0cb293ec407&algo_expid=44ccbd11-2796-437a-bcd9-c0cb293ec407-16&btsid=0ab50f4416003120632535375ea511&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
I saw that the PX6 and Android 10, but when I checked the CPU-Z, I've never seen a chipset before.
Even my Korean site says it's not px5
Please let me know what this is like.
## It's system information. ##
Android 10
kernel version
4.4.83+
[email protected] #48
Sat Jan 6 10:28:23 CST 2018
Build Number
V1.3.7 LX_HHY03_1920 ABROAD
MCU Version Number
RX Lexus_ZHP3-7 1-Oct 14 2020-10:32:43_E
CAN Version Number
LEX-191229-190228
## It's CPU-Z Information. ##
Cortex ARM Cortex-A53 1.40 GHz
Intelligent Processors by ARM
Cores : 8.
Architecture : 8x ARM Cortex-A53 @ 1.40 GHz
Revision : rOp3
Clock Speed : 400 MHz 1.40 GHz
GPU Vendor : ARM_1.7_32BIT
GPU Renderer : Mali-400 MP
Scaling Governor : sched
Model : SAMSUNG/CortexA53/8Core (aosp_avn_ref)
Manufacturer : NEXELL
Brand : Android
Board : avn_ref
Screen Size : 9.63 inches
Screen Resolution : 1920 x 720 pixels
Screen Density : 212 dpi
Total RAM : 3920 MB
Available RAM : 934 MB (23%)
Internal Storage : 52.86 GB
Android Version : 7.1.2
API Level : 25
Security Patch Level : 2017-10-05
Bootloader : unknown
Build ID: aosp_avn_ref-userdebug 7.1.2 N2G48H eng.george.20180106.102823 dev-keys
Java VM : ART 2.1.0
OpenGL ES : 2.0
Kernel Architecture : armv8|
Kernel Version : 4.4.83+ (eng.george.20180106.102823)
Root Access : No
Google Play Services : 20 47 13 (040304-344095733)
++ Is Android 9 or 10 upgrade possible with this device?
Hi, Were you able to find anything for this unit. I have the exact same one and many issues
It's a PX5 and one of the first as "newer" models are clocked at 1.5GHz. In this case as a snapdragon alternative.
It'snot a PX5, but itś not a PX6 either as it is fully A53 based 8-core CPU.
And it might say Android 10, but that is a ly.
It's API level (SDK version) is 25, meaning that it's Android 7.1
darknightshine said:
Hi, Were you able to find anything for this unit. I have the exact same one and many issues
Click to expand...
Click to collapse
Hello, I have this unit on a bmw f30 and I wasn’t able to accès factory setup menu, i have trued all passwords, can someone help me with this? Or this anyway to accès to this menu?? I am really desperate