Help!
I need some advice. I had stock 4.2.2, flashed omega v14 and then 4.3 GE ROM. I did not know about knox and I have tripped it. It shows 0x1 now. I understand that I cannot change that, and that is ok.
But I cannot flash any firmwares now.
I have tried the pre-rooted 4.3 in Odin:
I9505XXUEMK8-PRE-ROOTED-KNOX-FREE-ODEX-FULL
failed.
I have tried official 4.3 for my carrier:
I9505XXUEMJ7_I9505TENEMJ8_I9505XXUEMJ7_HOME.tar
failed.
If I try to flash cwm it boots, but it just stays on the google logo, and does not continue. If I try to enter recovery I get a message about secure mode and it does not enter recovery.
If I flash stock recovery, I can get into recovery. I have tried a factory reset, but it still boots to Google logo and nothing else.
What should I do? There must be a way?
Same issue with me. Looking for solutions. You can install Pacman rom without any problem.
Can someone please give me some pointers?
I have now tried to install the newest firmware from sammobile, even though it isn't for my carrier. It also fails in Odin. I am using 3.07. I can flash CWM and I can get into CWM now, but there's nothing on my sdcard. So I can not flash anything from CWM.
Is it possible to load files onto CWM when the phone won't boot fully?
Is there a firmware I can flash in Odin that will work in this situation?
Should I try Kies? Will Kies be able to sort this out?
Right now I have a brick.
Try a different usb port, different cable, make sure kies is not running in the background and try Odin 1.85.
Make sure you're not mixing up "SDcard" partition on your internal storage with your EXT-SD Card the one that you physically inserted into the device! Save the zip into both maybe and wipe cache, factory wipe, then flash the ROM. Try another cable and USB, try a different recovery e.g. Philz!
RossFixxed said:
Make sure you're not mixing up "SDcard" partition on your internal storage with your EXT-SD Card the one that you physically inserted into the device! Save the zip into both maybe and wipe cache, factory wipe, then flash the ROM. Try another cable and USB, try a different recovery e.g. Philz!
Click to expand...
Click to collapse
During the failed flash-attempts, my sdcard is now empty. I have no files in CWM to flash. How do I get the files to my card? I don't have an external sdcard.
Trying Odin 1.85 now with latest firmware from sammobile. Right now the phone will not boot, I can't flash anything through Odin (due to knox?) and I can't flash anything from CWM since there are no files there to flash...
Edit:
Odin 1.85 also fails. I cannot install any firmware now.
Knox will not stop you flashing with Odin. It won't really affect anything except, potentially, your warranty.
Where have you put the Zip file for the ROM you want to install? You need to point CWM towards it directly, whatever folder it is in... Are you doing that?
You could buy an SD card for a few quid and copy a ROM onto that if needs be... I would flash Philz recovery and Wipe Cache. Wipe factory reset (install a new ROM Option), click Install from SD Card and navigate to the folder.
If your entire SD Partition is wiped you'll need to hook up to the PC and copy the zip back over in download mode.
EDIT: Sorry if this is real obvious or I'm missing what's wrong. I figure if you're anything like me you're a bit anxious about this, just going step by step, we'll fix it!
jadajada said:
Help!
I need some advice. I had stock 4.2.2, flashed omega v14 and then 4.3 GE ROM. I did not know about knox and I have tripped it. It shows 0x1 now. I understand that I cannot change that, and that is ok.
But I cannot flash any firmwares now.
I have tried the pre-rooted 4.3 in Odin:
I9505XXUEMK8-PRE-ROOTED-KNOX-FREE-ODEX-FULL
failed.
I have tried official 4.3 for my carrier:
I9505XXUEMJ7_I9505TENEMJ8_I9505XXUEMJ7_HOME.tar
failed.
If I try to flash cwm it boots, but it just stays on the google logo, and does not continue. If I try to enter recovery I get a message about secure mode and it does not enter recovery.
If I flash stock recovery, I can get into recovery. I have tried a factory reset, but it still boots to Google logo and nothing else.
What should I do? There must be a way?
Click to expand...
Click to collapse
OK so i haven't got an S4 but i do have the mini and have a similar problem.
MJ7 got released but not for my country, so i flashed an AUS MJ7 firmware. Now it has been rolled out to my country and i cannot flash my original FW back due to different CSC. AUS CSC=MJ1 & UK CSC=MK1. (Failed in Odin)
so my theory is i cannot now flash any other regions firmware and stuck with MJ1 CSC. (AUS Firmware)
Can you remember the original FW you flashed when you had knox 0x0?
Hope this makes sense. I'm not getting any replies on S4 mini forum.
*boy*racer* said:
OK so i haven't got an S4 but i do have the mini and have a similar problem.
MJ7 got released but not for my country, so i flashed an AUS MJ7 firmware. Now it has been rolled out to my country and i cannot flash my original FW back due to different CSC. AUS CSC=MJ1 & UK CSC=MK1. (Failed in Odin)
so my theory is i cannot now flash any other regions firmware and stuck with MJ1 CSC.
Can you remember the original FW you flashed when you had knox 0x0?
Hope this makes sense. I'm not getting any replies on S4 mini forum.
Click to expand...
Click to collapse
I most likely had I9505TENEMJ8 or the one before that (MJ5?). It is Norway TEN. I have downloaded the latest for TEN, MJ8 and it fails in Odin. Right now I would be happy just to be able to flash anything at all...
jadajada said:
I most likely had I9505TENEMJ8 or the one before that (MJ5?). It is Norway TEN. I have downloaded the latest for TEN, MJ8 and it fails in Odin. Right now I would be happy just to be able to flash anything at all...
Click to expand...
Click to collapse
OK so in stock recovery does it say your CSC code?
*boy*racer* said:
OK so in stock recovery does it say your CSC code?
Click to expand...
Click to collapse
I had CWM. Tried to flash stock recovery now, but I can't boot into it. I do the usual, then a green android shows up, then shifts to lying on his back with a red exclamation mark over it. Then the phone reboots and stays at the Samsung logo.
I am soon ready to give up. Nothing works!
RossFixxed said:
Knox will not stop you flashing with Odin. It won't really affect anything except, potentially, your warranty.
Where have you put the Zip file for the ROM you want to install? You need to point CWM towards it directly, whatever folder it is in... Are you doing that?
You could buy an SD card for a few quid and copy a ROM onto that if needs be... I would flash Philz recovery and Wipe Cache. Wipe factory reset (install a new ROM Option), click Install from SD Card and navigate to the folder.
If your entire SD Partition is wiped you'll need to hook up to the PC and copy the zip back over in download mode.
EDIT: Sorry if this is real obvious or I'm missing what's wrong. I figure if you're anything like me you're a bit anxious about this, just going step by step, we'll fix it!
Click to expand...
Click to collapse
How do I copy a file over through download mode?
I have tried adb shell with CWM booted, but I get "unauthorized device error"
I think I will buy an sdcard, but that won't solve my problem with not being able to flash anything with Odin. But perhaps I can get a working rom flashed through CWM.
I had no problems flashing roms with odin before knox. Now I can not flash anything at all.
Edit:
I have also tried connecting to kies now like this:
http://androidcentral.us/2013/09/how-to-fix-firmware-upgrade-encountered-an-issue-on-kies/
I get a message saying model GT-I9505 does not support initialization.
So?
jadajada said:
How do I copy a file over through download mode?
I have tried adb shell with CWM booted, but I get "unauthorized device error"
I think I will buy an sdcard, but that won't solve my problem with not being able to flash anything with Odin. But perhaps I can get a working rom flashed through CWM.
I had no problems flashing roms with odin before knox. Now I can not flash anything at all.
Edit:
I have also tried connecting to kies now like this:
http://androidcentral.us/2013/09/how-to-fix-firmware-upgrade-encountered-an-issue-on-kies/
I get a message saying model GT-I9505 does not support initialization.
So?
Click to expand...
Click to collapse
Boot it into download mode and copy the zip over with windows explorer, into the internal memory. Navigate with Install from Zip option in CWM (maybe try Philz, it definitely works for me, with Knox 0x1) and install.
RossFixxed said:
Boot it into download mode and copy the zip over with windows explorer, into the internal memory. Navigate with Install from Zip option in CWM (maybe try Philz, it definitely works for me, with Knox 0x1) and install.
Click to expand...
Click to collapse
When the phone is in download mode, where do I find it in Windows? It does not show in Windows Explorer, but it shows up in Odin.
jadajada said:
When the phone is in download mode, where do I find it in Windows? It does not show in Windows Explorer, but it shows up in Odin.
Click to expand...
Click to collapse
RossFixxed said:
Boot it into download mode and copy the zip over with windows explorer, into the internal memory. Navigate with Install from Zip option in CWM (maybe try Philz, it definitely works for me, with Knox 0x1) and install.
Click to expand...
Click to collapse
OK. I went out and got an sd card. Copied over a rom zip to the card, flashed CWM and rebooted into recovery. Chose install from external sd card and ran the file. The setup started and ran for a few seconds, then the phone rebooted and I am back on the Samsung Logo.
I just can't flash any firmwares on this phone no matter how. Knox or not, but it all started when I tried to reflash stock rom using odin after the knox flag was triggered.
Any more ideas?
Edit:
just tried Philz recovery also. Same thing. Update runs for a few seconds then reboot. No go.
Edit 2:
Philz has the option to clean for installing a new rom. It also fails with this:
E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p27
I suppose this as something to do with nothing being able to flash here. What Can be done with this?
Edit 3:
Success!! I was able to flash Omega Rom V14 through Philz. I actually installed and is running. I do get two knox lines at boot, one yellow and one red, something about the kernel not being something...
Now to investigate what the h*ll happened.
I am still unable to install any firmware through Odin. Going to try the Google Edition 4.3 again since I kind of liked that. But what actually happened here?
I'm happy to hear you got it working! I have no idea what caused it, first thought is corrupted zip files for rom. I'll have a look into it.
Sorry didn't get back to you, fell and injured my back, had to go get injections!
Sent from my GT-I9505 using xda app-developers app
jadajada said:
Can someone please give me some pointers?
I have now tried to install the newest firmware from sammobile, even though it isn't for my carrier. It also fails in Odin. I am using 3.07. I can flash CWM and I can get into CWM now, but there's nothing on my sdcard. So I can not flash anything from CWM.
Is it possible to load files onto CWM when the phone won't boot fully?
Is there a firmware I can flash in Odin that will work in this situation?
Should I try Kies? Will Kies be able to sort this out?
Right now I have a brick.
Click to expand...
Click to collapse
Mj7 is not a 4.3 rom. Have you tried to flash any stock 4.3 rom (for example ubuemk1 fob latam) or any other you are sur to be 4.3? Samsung alerted clearly before updating to 4.3 you won't be able to back prior versions any more...
Enviado desde mi GT-P7510 usando Tapatalk 2
jaswinky said:
Mj7 is not a 4.3 rom. Have you tried to flash any stock 4.3 rom (for example ubuemk1 fob latam) or any other you are sur to be 4.3? Samsung alerted clearly before updating to 4.3 you won't be able to back prior versions any more...
Enviado desde mi GT-P7510 usando Tapatalk 2
Click to expand...
Click to collapse
Solved! I do not know what solved it. I managed to install Omega Rom V16 through Philz recovery. From there I rebooted into Philz again and did a total clean to install new rom.
I downloaded a newer Odin, 3.09.
I flashed the same firmware which failed yesterday, 4.3 NEE rom.
This time it worked! So something helped.
Thank you to everyone who chipped in. It seemed rather hopeless yesterday.
I know the feeling man but is possible you were downgrading and you can't do that with knox now.
Sent from my GT-I9505 using xda app-developers app
jadajada said:
Can someone please give me some pointers?
I have now tried to install the newest firmware from sammobile, even though it isn't for my carrier. It also fails in Odin. I am using 3.07. I can flash CWM and I can get into CWM now, but there's nothing on my sdcard. So I can not flash anything from CWM.
Is it possible to load files onto CWM when the phone won't boot fully?
Is there a firmware I can flash in Odin that will work in this situation?
Should I try Kies? Will Kies be able to sort this out?
Right now I have a brick.
Click to expand...
Click to collapse
You can try flashing TWRP it support usb mount on recovery then transfer OMega Rom again..
Kies wont work on your phone because your already in the custom status.
Related
So I am not to NOOB but I sure acted like it last night when I was way tired and tried to flash a ROM. Here is what I did...
I didn't catch that I didn't have the CWM but that I had booted into the stock recovery tool... Well I didn't before it was to late that is...
I clicked WIPE DATA
I clicked WIPE CACHE
Then noticed there was no "install from SD"
So it seems like whatever I find to install from ODIN I can't get the CWM to install so I can then flash a ROM!
I need my phone up for work, I am in HOT SH!T!
How can I either flash a rom via stock recovery "update format" OR install CMW via ODIN?
PLEASE HELP ASAP!!
Thank you
why don't you just flash again via odin and then root your phone via odin as well?
Don't quite understand whats your problem. So what if you wiped data and cache the rom is still there. Reboot normally and flash cfroot according to your firmware and then you should have cwm up and running. After that flash desired rom and the end.
Sent from my GT-I9100 using xda premium
Flash one of the CF-Root kernels through Odin, whichever one matches the firmware you're running. They have CWM baked in, along with root so you can flash a ROM afterwards.
If you can't get into download mode, turn your phone off, plug it in and hold down + power + home and it should boot into download mode. Then you can flash with Odin.
I thought the same thing, that so what that I wiped them... but when I rebooted the phone it just sits at the "Rethink possible screen"
I can get into download mode and I did find the "cf" post but I dunno what kernel I am running as I can't boot to go into settings to seek.
if you in recovery mod choose reboot, and it will be ok, than read: http://forum.xda-developers.com/showthread.php?t=1103399,
or put in download mod: turn your phone off, hold down + power + home. Then flash with Odin.
I know you probably don't want to, but you can try doing a factory reset, that should allow you to get your phone up and running. If you have gmail installed it should put all your contacts back, as long as you backed up to gmail.
If you have an old copy of titanium backup you won't loose ALL your apps, this is why I tend to back up every weekend, I'm only a week behind with everything if problems arise....
Cheers...
Flash stock rom... Download cwm and flash with odin.... Then instal rom u want with cwm...
Sent from my GT-I9100 using xda premium
like I said, I am not a noob, just made a mistake...
I found the cf-kernel page, but I dunno what kernel I am running and so I dunno what kernel to flash (It seems vital)
"just rebooting" don't work lol I wish... it hangs at the "rethink possible" boot screen...
I was rooted but running the stock rom, if I can get CWM installed I think I will be golden, but whatever I seem to flash from ODIN don't work :-( no matter what nothing will flash as "PDA" but when I flash using "phone" it seems to install "zimage" which is the embedded file and succeeds and phone reboots... but still only to the rethink possible point.
flash any stock firmware then flash supercore 2.0 and do whatever you want from there
Think i know what the problem is,i have same issue sometimes,try flashing anogher rooted Kernel through odin,make sure its like if the rom is a kj3 that it has a kj3 kernel.see if that works
ultramag69 said:
you can try doing a factory reset... Cheers...
Click to expand...
Click to collapse
Be glad to but it isn't an option in the recovery?
My options are as follows...
Reboot system now
Apply update from SD
Wipe/reset
Wipe/cache
been in similar, if not same situation, things were missing from cwm recovery, like you wrote...if memory serves me fine,
flash stock fw with pit, repartition and everything...
then some rootec kernel with recovery...
Oh sh!t... just flashed the pit file here... http://www.darkyrom.com/community/i...-with-odin/#download-a-pit-file-for-the-i9100
and odin said success... and screen went black.
Not responding at all now :-(
let's go in a safe way...as long as you have download mode, you're OK.
Go to samfirmware or somewhere on XDA and find FULL STOCK FIRMWARE with proper .pit file and flash it with odin. Not kernel, not anything that is not full rom.
since you state that you are not noob, you know what from there.
abovenbeyond said:
Oh sh!t... just flashed the pit file here... http://www.darkyrom.com/community/i...-with-odin/#download-a-pit-file-for-the-i9100
and odin said success... and screen went black.
Not responding at all now :-(
Click to expand...
Click to collapse
What on earth are you doing?
It clearly states:
I9000 & I897 owners (not I91000!!!) may also need a PIT file (also included in RE ROM ZIP files). I will explain further what it's for.
Why didn't you follow a tutorial on xda? Can you boot in download mode?
borstri said:
let's go in a safe way...as long as you have download mode, you're OK.
Go to samfirmware or somewhere on XDA and fin FULL STOCK FIRMWARE with proper .pit file and flash it with odin. Not kernel, not anything that is not full rom.
since you state that you are not noob, you know what from there.
Click to expand...
Click to collapse
Sounds amazing but after my post above I not can't get the phone to power on although I hear the laptop detect it as I attempt to power down or up, but no screen or led display...
Really worried now... ****!
Lennyz1988 said:
What on earth are you doing?
It clearly states:
I9000 & I897 owners (not I91000!!!) may also need a PIT file (also included in RE ROM ZIP files). I will explain further what it's for.
Why didn't you follow a tutorial on xda? Can you boot in download mode?
Click to expand...
Click to collapse
I flashed this...
Download a PIT file for the I9100
Download EXT4.pit file (2KB)
(for the S2 only)
battery pullout, then three button combo for download
Hi,
I've tried several times flashing Clockworkmod 6.0.3.3 and other versions of Clockworkmod for S4 I9505, but after flashing it using Odin 1.85, Odin says ok, and reboot my phone, but after I turn the phone off, and try to start phone into recovery mode using power, volume up and home button at the same time, my phone doesn't find anything to use, so it starts in regular recovery mode (Default as from Samsung).
Anyone have an idea why Clockworkmod won't work on the phone, even when Odin says ok on flashing?
I've made sure that I downloaded the correct file for my phone.
My phone is a euro version, that shouldn't matter?
King Canute said:
Hi,
I've tried several times flashing Clockworkmod 6.0.3.3 and other versions of Clockworkmod for S4 I9505, but after flashing it using Odin 1.85, Odin says ok, and reboot my phone, but after I turn the phone off, and try to start phone into recovery mode using power, volume up and home button at the same time, my phone doesn't find anything to use, so it starts in regular recovery mode (Default as from Samsung).
Anyone have an idea why Clockworkmod won't work on the phone, even when Odin says ok on flashing?
I've made sure that I downloaded the correct file for my phone.
My phone is a euro version, that shouldn't matter?
Click to expand...
Click to collapse
Download the attached link. You find a folder of s4 root. Odin 1.85 and Cwm file and a rooting file(only if you need root)
An odin 1.85 specialy for gti 9505. Big thanks to chainfire.
Turn your phone in downloadmode. Connect your Phone to your pc. Open odin and select pda and select the file i9505-cwm-recovery -6.0.3.2-4
Start.
After the phone is rebooting, turn your phone off.
Then volume up,home button and powerbutton at the same time. When you see on top a blue text" recovery booting" let go of the 3 buttons and it boots in cwm. This should do the trick.
http://db.tt/BmvKeopK
Regards
Verstuurd van mijn GT-I9505 met Tapatalk
astraopcuser said:
Download the attached link. You find a folder of s4 root. Odin 1.85 and Cwm file and a rooting file(only if you need root)
An odin 1.85 specialy for gti 9505. Big thanks to chainfire.
Turn your phone in downloadmode. Connect your Phone to your pc. Open odin and select pda and select the file i9505-cwm-recovery -6.0.3.2-4
Start.
After the phone is rebooting, turn your phone off.
Then volume up,home button and powerbutton at the same time. When you see on top a blue text" recovery booting" let go of the 3 buttons and it boots in cwm. This should do the trick.
http://db.tt/BmvKeopK
Regards
Verstuurd van mijn GT-I9505 met Tapatalk
Click to expand...
Click to collapse
Thanks for trying to help me out, but still I got no luck with this,
After the flashing, when I try to go into recovery mode I can see that the phone tries to install or update something, but a sec after I get some sort of fail message and I'm back to default recovery mode.
I can't understand what seems to be the problem.
Could it be that my phone might be locked to a carrier?
King Canute said:
Thanks for trying to help me out, but still I got no luck with this,
After the flashing, when I try to go into recovery mode I can see that the phone tries to install or update something, but a sec after I get some sort of fail message and I'm back to default recovery mode.
I can't understand what seems to be the problem.
Could it be that my phone might be locked to a carrier?
Click to expand...
Click to collapse
Is your device rooted yet?
I first rooted my phone and then i flashed cwm recovery via odin 1.85. All in the file you've downloaded.
astraopcuser said:
Is your device rooted yet?
I first rooted my phone and then i flashed cwm recovery via odin 1.85. All in the file you've downloaded.
Click to expand...
Click to collapse
Do I have to root the phone to make the clockworkmod work?
King Canute said:
Do I have to root the phone to make the clockworkmod work?
Click to expand...
Click to collapse
you must first root your phone.:good:
---------- Post added at 10:54 PM ---------- Previous post was at 10:36 PM ----------
astraopcuser said:
you must first root your phone.:good:
Click to expand...
Click to collapse
for the gti 9505 lte is a little bit diverent at this time.
first flash the cf autorootjflte.... via odin. phone in downloadmode, select pda,select cf autoroot jfte... hit start. phone reboots, you see an red/orange android droid then its rebooting
after that turn off your phone . phone in downloadmode, open odin, select pda, select cwm 6.0.3.2-4, hit start
Your phone is rooted with cwm.
What rubbish!
You DO NOT need to root your phone to install a custom recovery. Are you sure you have i9505??
Download the latest Philz CWM recovery in .tar format and flash this in Odin 1.85.
I've done this on 6 different S4s and NEVER had an issue.
Seems strange that your having problems dude.
Obagleyfreer said:
What rubbish!
You DO NOT need to root your phone to install a custom recovery. Are you sure you have i9505??
Download the latest Philz CWM recovery in .tar format and flash this in Odin 1.85.
I've done this on 6 different S4s and NEVER had an issue.
Seems strange that your having problems dude.
Click to expand...
Click to collapse
How rubbish..... its goes that way to get a custom cwm on the gti9505.
He ask cwm, not philz recovery.
You can say next time ....theres another way to get it work.
I only trying to help
Verstuurd van mijn GT-I9505 met Tapatalk
This version of CWM work perfect and supports exFat (64GB SD Cards).
You don't need root.
Flash as PDA using Odin PC.
http://forum.xda-developers.com/showthread.php?t=2279579
Obagleyfreer said:
What rubbish!
You DO NOT need to root your phone to install a custom recovery. Are you sure you have i9505??
Download the latest Philz CWM recovery in .tar format and flash this in Odin 1.85.
I've done this on 6 different S4s and NEVER had an issue.
Seems strange that your having problems dude.
Click to expand...
Click to collapse
I'm 100% sure that my phone is a 9505, it's the only version sold in Norway.
Mittaa said:
This version of CWM work perfect and supports exFat (64GB SD Cards).
You don't need root.
Flash as PDA using Odin PC.
http://forum.xda-developers.com/showthread.php?t=2279579
Click to expand...
Click to collapse
It's this version I'm trying to flash with no luck, and I can't understand why it's not working.
Maybe I have to do a factory reset, or flash a complete new stock ROM?
King Canute said:
It's this version I'm trying to flash with no luck, and I can't understand why it's not working.
Maybe I have to do a factory reset, or flash a complete new stock ROM?
Click to expand...
Click to collapse
Do you have a proper USB connection between Odin PC and your phone?
Try another USB cable or/and another USB port ...
Did you remember to kill all KIES processes running in background?
CTRL, ALT, DELETE running processes ...
King Canute said:
Hi,
I've tried several times flashing Clockworkmod 6.0.3.3 and other versions of Clockworkmod for S4 I9505, but after flashing it using Odin 1.85, Odin says ok, and reboot my phone, but after I turn the phone off, and try to start phone into recovery mode using power, volume up and home button at the same time, my phone doesn't find anything to use, so it starts in regular recovery mode (Default as from Samsung).
Anyone have an idea why Clockworkmod won't work on the phone, even when Odin says ok on flashing?
I've made sure that I downloaded the correct file for my phone.
My phone is a euro version, that shouldn't matter?
Click to expand...
Click to collapse
in some stock firmwares, when you boot the phone, the stock recovery is re-writing over the flashed custom one:
root your phone, and with a root explorer go to system, delete "recovery-from-boot.p" or rename it to "recovery-from-boot.p.bak"
then go to system/etc, delete this file: "install-recovery.sh" or rename it to "install-recovery.sh.bak.
now you can flash your custom recovery.
Mittaa said:
Do you have a proper USB connection between Odin PC and your phone?
Try another USB cable or/and another USB port ...
Did you remember to kill all KIES processes running in background?
CTRL, ALT, DELETE running processes ...
Click to expand...
Click to collapse
I'm using an Samsung retail cable from the S2, but I did try with the S4 retail cable aswell, but still no luck. The flashing goes ok in Odin, so I doubt the cable is the problem. And Kies isn't running in the background at all. Even changed USB port just to be sure testing all the options.
samersh72 said:
in some stock firmwares, when you boot the phone, the stock recovery is re-writing over the flashed custom one:
root your phone, and with a root explorer go to system, delete "recovery-from-boot.p" or rename it to "recovery-from-boot.p.bak"
then go to system/etc, delete this file: "install-recovery.sh" or rename it to "install-recovery.sh.bak.
now you can flash your custom recovery.
Click to expand...
Click to collapse
Ok, so I might have to root my phone and try this out then.. I was hoping to avoid rooting for now.
And the way to root is done using Odin as described in an earlier post?
Will it be possible to reset the counter later on if I need to go back to stock ROM if the phone should need to sendt to service etc? I know it is possible to reset the counter on S3.
King Canute said:
Ok, so I might have to root my phone and try this out then.. I was hoping to avoid rooting for now.
And the way to root is done using Odin as described in an earlier post?
Will it be possible to reset the counter later on if I need to go back to stock ROM if the phone should need to sendt to service etc? I know it is possible to reset the counter on S3.
Click to expand...
Click to collapse
if you want to be sure, flash custom recovery, do not check "auto-reboot" or when it says "pass" unplug and take off the battery, then reinsert it, boot straight to recovery so you should see the custom recovery. but once you reboot the phone the stock recovery will be back .
any way, you can root in any method you want.
why you want to flash custom recovery without rooting??
once you flashed anything unofficial with odin, the counter is triggered.
yes you can reset it with triangle away.
samersh72 said:
if you want to be sure, flash custom recovery, do not check "auto-reboot" or when it says "pass" unplug and take off the battery, then reinsert it, boot straight to recovery so you should see the custom recovery. but once you reboot the phone the stock recovery will be back .
any way, you can root in any method you want.
why you want to flash custom recovery without rooting??
once you flashed anything unofficial with odin, the counter is triggered.
yes you can reset it with triangle away.
Click to expand...
Click to collapse
Ok I tried to flash the clockworkmod without checking the auto-reboot and it worked like you said.
The reason I don't want to root the phone is, because I actually don't need it, never had any use of it on other phones.
Ok then I have to root it like you said to make i work properly.
King Canute said:
Ok I tried to flash the clockworkmod without checking the auto-reboot and it worked like you said.
The reason I don't want to root the phone is, because I actually don't need it, never had any use of it on other phones.
Ok then I have to root it like you said to make i work properly.
Click to expand...
Click to collapse
hmmm, so why you need cwm?
EDIT: usually these 2 files (that reflash stock recovery) come with some OTA update. So if you dont want to root, you can flash a stock firmware with odin (those 2 files are not included) in order to flash custom recovery without rooting.
any way, when you flashed custom recovery, your binary counter is triggered. so you need triangle away to reset it for warranty ====> you need root access!
samersh72 said:
hmmm, so why you need cwm?
EDIT: usually these 2 files (that reflash stock recovery) come with some OTA update. So if you dont want to root, you can flash a stock firmware with odin (those 2 files are not included) in order to flash custom recovery without rooting.
any way, when you flashed custom recovery, your binary counter is triggered. so you need triangle away to reset it for warranty ====> you need root access!
Click to expand...
Click to collapse
I was thinking about installing Cyanogenmod ROM or maybe later Google Android 4.3.
So now I need to root the phone.
samersh72 said:
hmmm, so why you need cwm?
EDIT: usually these 2 files (that reflash stock recovery) come with some OTA update. So if you dont want to root, you can flash a stock firmware with odin (those 2 files are not included) in order to flash custom recovery without rooting.
any way, when you flashed custom recovery, your binary counter is triggered. so you need triangle away to reset it for warranty ====> you need root access!
Click to expand...
Click to collapse
Triangle Away wan't work if you have custom kernel OR recovery !
Mittaa said:
Triangle Away wan't work if you have custom kernel OR recovery !
Click to expand...
Click to collapse
yes i know and he supposed to read or already red TA thread to know that
Hi there. I think I soft-bricked my phone. I am running mf3 firmware on my i337 galaxy s4 and i tried to flash Graviton. I was using safestrap and I, like an idiot, didn't use a romslot and did it over my stock. Seemed to work fine until I actually booted the phone. It can't access wifi and therefore wont go past the find wifi screen. I try to enter recovery but it just keeps going to the download screen. After trying every way I could find I still cant either wipe my phone or flash the stock firmware. I have tried kies and odin but nothing works. Can anyone help me out or am I royally screwed?
LCubed22 said:
Hi there. I think I soft-bricked my phone. I am running mf3 firmware on my i337 galaxy s4 and i tried to flash Graviton. I was using safestrap and I, like an idiot, didn't use a romslot and did it over my stock. Seemed to work fine until I actually booted the phone. It can't access wifi and therefore wont go past the find wifi screen. I try to enter recovery but it just keeps going to the download screen. After trying every way I could find I still cant either wipe my phone or flash the stock firmware. I have tried kies and odin but nothing works. Can anyone help me out or am I royally screwed?
Click to expand...
Click to collapse
as long as the phone can go into download mode, you can use odin to reflash the stock firmware (and factory recovery). Check samsungupdates for your model/region and stock/official firmware. You'd have to re-root after. I did the same thing a while back, lost my recovery and this is the method I used to bring my phone back to life, was just sitting at the samsung logo and had no recovery (but had download mode).
LCubed22 said:
Hi there. I think I soft-bricked my phone. I am running mf3 firmware on my i337 galaxy s4 and i tried to flash Graviton. I was using safestrap and I, like an idiot, didn't use a romslot and did it over my stock. Seemed to work fine until I actually booted the phone. It can't access wifi and therefore wont go past the find wifi screen. I try to enter recovery but it just keeps going to the download screen. After trying every way I could find I still cant either wipe my phone or flash the stock firmware. I have tried kies and odin but nothing works. Can anyone help me out or am I royally screwed?
Click to expand...
Click to collapse
Does Odin recognize the phone? Also, when you say it won't go past the "find wifi" screen, does that mean it booted to the "Welcome" screen?
nerdyblonde said:
Does Odin recognize the phone? Also, when you say it won't go past the "find wifi" screen, does that mean it booted to the "Welcome" screen?
Click to expand...
Click to collapse
Sorry should have edited the first post. I actually fixed my original problem and am now having a different one. I got all the way through nd did a restore of my stock rom. I then tried to flash the graviton one to a different rom-slot in safestrap. So now there is a completely different partition in the storage and the flash didnt work so I'm now completely stuck in download mode. I have tried to flash the tar files in odin and it fails every time. I should have all of the necessary files for mf3.
LCubed22 said:
Sorry should have edited the first post. I actually fixed my original problem and am now having a different one. I got all the way through nd did a restore of my stock rom. I then tried to flash the graviton one to a different rom-slot in safestrap. So now there is a completely different partition in the storage and the flash didnt work so I'm now completely stuck in download mode. I have tried to flash the tar files in odin and it fails every time. I should have all of the necessary files for mf3.
Click to expand...
Click to collapse
If you have the 16GB Galaxy, try flashing this file in the PIT slot in Odin.. Don't put any other files in the PDA slot, etc. It's worked many times when phone would only boot to download..
https://www.dropbox.com/s/fptxnxsqevjhnt9/SGS-I337_16GB.pit
Hey Nerdyblonde, what does this pit file do?
I softbricked my phone when trying to flip from CWM to TWRP. (Thought I could just wipe phone and odin flash on top of CWM... VERY WRONG). Now I can't get into recovery and my phone is telling me to use kies recovery *shudder*. So I tried kies when I couldn't Odin flash to stock rom and still nothing.
nerdyblonde said:
If you have the 16GB Galaxy, try flashing this file in the PIT slot in Odin.. Don't put any other files in the PDA slot, etc. It's worked many times when phone would only boot to download..
https://www.dropbox.com/s/fptxnxsqevjhnt9/SGS-I337_16GB.pit
Click to expand...
Click to collapse
snoops609 said:
Hey Nerdyblonde, what does this pit file do?
I softbricked my phone when trying to flip from CWM to TWRP. (Thought I could just wipe phone and odin flash on top of CWM... VERY WRONG). Now I can't get into recovery and my phone is telling me to use kies recovery *shudder*. So I tried kies when I couldn't Odin flash to stock rom and still nothing.
Click to expand...
Click to collapse
Sorry it took a few days to answer.. The Kies screen was the same thing that happened to me... I have the MF3 version, so I can't install custom recovery, but I couldn't boot into recovery period. I flashed that pit file in the pit box on Odin, it restored my recovery.
Do you have MDL or MF3? If you have MDL, I would be really careful not to flash MF3 unless you want to stick with basically stock until one of the geniuses here figures out how to unlock the bootloader.
guys ii really need some help.
i downloaded BTU-N9005XXUENB7-20140310153913 and flashed it via odin while in download mode. the flash was successful but now all im seeing is "recovery booting" on the phone and its just staying there?
ii was on stock rom 4.3 rooted with custom recovery before flashing the 4.4.2 file in odin. have i f****d my phone?
i did the same thing as i did last time iand it worked but im not sure whats going on here?
please can someone help me please:crying::crying::crying::crying:
Same happened to me when i used mobile Odin. The bootloader wasn't updated.
Did you use Odin 1.85? And did you tick the option update new bootloader? If not do that.
If did that then wipe cache and data reset from recovery.
kenny1991 said:
Same happened to me when i used mobile Odin. The bootloader wasn't updated.
Did you use Odin 1.85? And did you tick the option update new bootloader? If not do that.
If did that then wipe cache and data reset from recovery.
Click to expand...
Click to collapse
yeah i used the wrong version of odin. i used 1.85 now its working, but i didnt select update bootloader, how do i know if it updated the bootloader?
You know if the phone is up and running. Kitkat can't boot without new bootloader. So if the phone is working there is no issues.
kenny1991 said:
You know if the phone is up and running. Kitkat can't boot without new bootloader. So if the phone is working there is no issues.
Click to expand...
Click to collapse
last thing. im trying to install TWRP . i have the tar file from their site. i used odin 1.85 and 3 and flashed pda. odin says its done but it wont boot into TWRP it just reboots.
edit: i used mobile odin and its all good thanks for all your help
You welcome
thedan55 said:
last thing. im trying to install TWRP . i have the tar file from their site. i used odin 1.85 and 3 and flashed pda. odin says its done but it wont boot into TWRP it just reboots.
edit: i used mobile odin and its all good thanks for all your help
Click to expand...
Click to collapse
just FYI,
if you want to flash TW custom ROM, the best you use is Chenglu CWM. So far I seldom see user complain got problem during flashing with this CWM.
TWRP, some users got problem, some are not.
My Galaxy s7 broke down and had to go back to my old galaxy s4, but I have a big problem or small, want to install this room but I can not install any recovery.
I tried everything in these last two days, stock rooms SamMobile, kernel's, TWRP, ROM Manager, philz Touch via odin .... via zip file ..... bootloader and modem .... pit files ... .pages and pages on xda ... different odin, cables.....everything
And always appears this error
E: footer is wrong
E: signature verification failed
If anyone can give help to fix this I am very appreciated, I want to install this room, but it's complicated
Thank you in advance
And sorry for my bad english
What is the phone's model number? The errors appear on Odin? What bootloader version is on the phone?
Galaxy S4
GT-I9505
4.4.2
I9505XXUGNJ8
bootloader .......where I see the bootloader?
audit13 said:
What is the phone's model number? The errors appear on Odin? What bootloader version is on the phone?
Click to expand...
Click to collapse
In the Odin no errors, everthing is ok
Galaxy s4
GT-I9505
4.4.2 stock room
i9505xxugnj8
where I see the bootloader?
Stock firmware firmware from Odin includes stock recovery.
Flash again with Odin by doing this: uncheck everything in Odin except f reset time, flash rom, when you see the word reset in the status window, remove USB cable from phone, remove battery for three seconds, replace battery, use buttons to boot directly to recovery, factory reset/wipe, reboot.
believe it or not I've done it in a post here on xda, I tried everything
different computers, even if the smartphone is original
Tiaguinho said:
believe it or not I've done it in a post here on xda, I tried everything
different computers, even if the smartphone is original
Click to expand...
Click to collapse
Is the phone rooted? Or can you root it?
If it is or you manage to root it, you should be able to flash a twrp.img file via Flashify.
yes, is rooted
GDReaper with Flashify I made it
finally yupiiiiiiiii
Thank you all for the great help, problem solved
thank you .... thank you, saved the day
thank you to all