I've been searching the forums to see if there is a custom kernel that you can flash over the stock rom. My friend did this to his motorola droid so that he could overclock the processor, so I assume someone has developed a similar kernel for the hero. Is this possible/does this kernel exist? I am aware that there are custom roms that allow for overlocking, but all I really want is a custom kernel.
Pick any kernel you want as far as I understand it. Of course, make a Nandroid first, then flash the new kernel. If you have any major problems with it, you can just restore the Nandroid, which will return you back to the stock kernel. I am about to embark on this same journey myself tonight. I'm going to use this one here - http://forum.xda-developers.com/showthread.php?t=705074 . Good luck to you in your endeavors.
I'd like to try flashing a new Kernel. I rooted my Evo using Unrevoked3. My guess is is that not all kernels are compatible with every ROM. I'm using a stock ROM, and I'm interested in trying the Kings 6 BFS kernel. Are there info pages on each kernel that would answer such questions? I tried searching for Kings 6 Kernel and came up dry.
*most* kernels will work with most roms, but not all the time. Sometimes, like with the netarchy-toastmod kernels, they have been optimized for use with a specific rom, like Fresh or Damage control. This is part of the reason why kernel coders always put the disclaimer that they are not responsible for anything that might go wrong with your phone. They can't forsee all possible unique user setups, so there might always be the off chance that some particular combination will result in your phone melting.
What I did, was get the rom I wanted, make a new nandroid backup, and start trial and error. I use them for a few days to see how performance, battery life, etc. are working, then try a different one.
I see on this site about flashing new roms, the 3.1 android and others and the Kernel.
Is their 2 different rom chips one for the kernel and one for the OS..?
When I flash a custom rom does that change the Kernel or do they have to be flashed seperate.
Is there certain custom roms that have both..?
When getting a custom rom do I need to get a new Kernel..
Do the custom roms have both, Little fuzzy here..?
Thanks for the info.
shaun298 said:
I see on this site about flashing new roms, the 3.1 android and others and the Kernel.
Is their 2 different rom chips one for the kernel and one for the OS..?
When I flash a custom rom does that change the Kernel or do they have to be flashed seperate.
Is there certain custom roms that have both..?
When getting a custom rom do I need to get a new Kernel..
Do the custom roms have both, Little fuzzy here..?
Thanks for the info.
Click to expand...
Click to collapse
Kernel and Rom are 2 separate flash...
most custom rom dev already takes care of the kernel for you with their custom roms ( kernel built in ... 1 flash takes care of both )...
but if you're interested in flashing a custom kernel... just make sure about its compatibility with various roms.
read thoroughly in custom rom & kernel's threads 1st post... they usually let you know what's the requirements are...etc
Thanks so much, that clears my mind and makes things much easier.
Not a slagging of match about which custom rom is best as devs spend hour's cooking and testing roms for us. Just want people to share what rom they're using and why. It might be useful if we mention the very things that attract us to the various roms. This will help new users to pin point a rom if they prefer the same things. For me what matters apart from anything else is a rom and kernel that is blazing fast and I don't care at all about the battbNot a slagging of match about which custom rom is best. Just want people to share what lollipop custom rom they're using and why. It might be useful if we mention the very things that attract us to the various lollipop roms, for instance am on cataclysmic due to the smart radio mostly which is the main reason am attracted to cataclysmic and code blue kernel, because this combination offers me the best performance. I have previously used franco kernel, but since it hasn't been updated for a while, code blue is the way for me battery. I am still new to s6 edge so cannot share much yet but once I have found a rom and kernel combination that gives me the power and fluidity I require will then share.
Im using the renegade rom because it has some features that my original G925P stock rom doesnt like smart manager. I cant use it on my phone without flashing a rom. And It has funny/cool on/off boot animations.
Sent from my SM-G925P using Tapatalk
I've been mucking around with Android for a while but basically stay with a ROM and what it comes packaged (or recommended) with.
Recently I've been looking around at Custom Kernels and I see they offer different options and functionality, but I lack some basic information:
I am guessing that the Kernel and ROM have to be compatible?
Is, for example a Kernel like Blu Spark or Lighting (all for OP5 and Nougat) compatible with all OP5 Nougat ROMs or is it ROM by ROM?
I looked over the pages for both Kernels and also for xXx Freedom OS and didn't see any information concerning compatible ROMs or compatible Kernels, is there any place/list that shows the compatibility of ROMs and Kernels?
Any information, or guidance to where I can find it would be appreciated.
Very simple.
There are 2 types of kernels. One which only works on an OOS based (custom) Rom, and one which will only work on a LOS or AOSP based Rom. Most custom kernels will work on every LOS or AOSP based ROM. But... There's one negative thing about flashing custom or OOS based Kernels. You will never know how the Kernel and/or ROM will behave. There's no 100 percent guarantee if a custom Kernel or ROM are made for each other. Even if a Kernel which comes with the ROM is no guarantee for working properly. There's no such thing as "Stable" even with ROMs. Because stable doesn't exist in a Dev World. It will always be a never ending story.
Long story short, search for yourself an satisfying combination. If you found one combination you like, stick with it and motivate the Custom ROM Developer and or Kernel Developer.
Edit: as you can read i cannot give a proper answer to your questions. The reason why a Custom ROM Dev doesn't show a list in their OP for working Custom Kernels, is mainly based on the fact that they don't like if a user flash another Kernel that didn't came with their ROM. Mostly to avoid non related ROM issues. Besides that, if you made a decision to flash a Different kernel, along with their ROM, you're on your own.
Sorry for being off-topic.
Each kernel needs to be build for each rom. Well not each rom. Each rom based on the top three. OOS, AOSP, and LOS. As each has their own kernel.
If you use LOS 14.1 or RR, then youll need a los kernel. If you run stock OOS. Freedom or xXx, youll need an oos based kernel
Not all devs build their kernels for los or aosp. Me as an example. I only have mine built for OOS and It wont work on los or aosp (well it may but you are 99.999% likely to run into a lot of problems)
I hope that clears it up a tad bit
lekiaM said:
Very simple.
There are 2 types of kernels. One which only works on an OOS based (custom) Rom, and one which will only work on a LOS or AOSP based Rom. Most custom kernels will work on every LOS or AOSP based ROM. But... There's one negative thing about flashing custom or OOS based Kernels. You will never know how the Kernel and/or ROM will behave. There's no 100 percent guarantee if a custom Kernel or ROM are made for each other. Even if a Kernel which comes with the ROM is no guarantee for working properly. There's no such thing as "Stable" even with ROMs. Because stable doesn't exist in a Dev World. It will always be a never ending story.
Long story short, search for yourself an satisfying combination. If you found one combination you like, stick with it and motivate the Custom ROM Developer and or Kernel Developer.
Edit: as you can read i cannot give a proper answer to your questions. The reason why a Custom ROM Dev doesn't show a list in their OP for working Custom Kernels, is mainly based on the fact that they don't like if a user flash another Kernel that didn't came with their ROM. Mostly to avoid non related ROM issues.
Click to expand...
Click to collapse
@lekiaM You provided a great answer and thank you. I did notice that some developers (xXx NoLimits) provide the option to select various Kernel during the install. I pretty much expected that matching a Rom to Kernel was a crap shoot to certain degree. I am going to try a few out and see how it goes.
One final question, if a Kernel offers functionality that is not offered in the original Kernel, how do you go about taking advantage of the added functionality?
Will the Kernel add those selection to the settings or will I need a different app to access them? I was thinking in particular of the don't wake on plug/unplug. I utilized some ROMs (CM) that had this feature in the setting, I use Freedom OS now and don't see that in the setting, but I see that the Blu Spark Kernel offers access to that function.
Zombie said:
Each kernel needs to be build for each rom. Well not each rom. Each rom based on the top three. OOS, AOSP, and LOS. As each has their own kernel.
If you use LOS 14.1 or RR, then youll need a los kernel. If you run stock OOS. Freedom or xXx, youll need an oos based kernel
Not all devs build their kernels for los or aosp. Me as an example. I only have mine built for OOS and It wont work on los or aosp (well it may but you are 99.999% likely to run into a lot of problems)
I hope that clears it up a tad bit
Click to expand...
Click to collapse
It does thanks. Prior to selecting some ROMs to try, I read that AOSP required a specific ROM so I steered away from it, for now. Until I am able to become a little more familiar with the entire subject.
noncomjd said:
It does thanks. Prior to selecting some ROMs to try, I read that AOSP required a specific ROM so I steered away from it, for now. Until I am able to become a little more familiar with the entire subject.
Click to expand...
Click to collapse
An aosp based rom will install and run like any other rom you decide to flash. It comes with the stock kernel built in
Each rom has their advantages and disadvantages. Currently Im running xXx 4.0 which is OOS based with extra features and then of course my own kernel for better performance and battery
@noncomjd Good question. And honestly I've been wondering that too (most of the time) i could gave you a simple answer on that, but i wont.
A Kernel can interfere with the ROMs behavior (for example manipulate the vibration, sounds, led light strength, button behavior and so on.) But a Kernel has their limits too and also the Kernel Dev in question. Besides that , i did saw some very strange things a Kernel Dev can do to manipulate a ROMs behavior. But i wont go further in that.
Answer to your question:
Yes. A good kernel dev can overwrite or add some tweaks in the ROM itself (you won't see it while flashing, but believe me after that, some things in settings are missing or added in the build.prop) . But as i earlier said it has their limits. A good Kernel Dev is aware of their capabilities. And they mostly play save. If a kernel Dev mentioned or added a feature or something in their changelog, than the feature is there. But to enable or disable that feature, you mostly need an 3rd party app(like a Kernel Manager) to activate or deactivate their added feature.
You need a kernel tweaking app in order to change kernel settings.
You can change those settings even if you run the stock kernel, but it won't offer as much features.
There are many kernel tweaking apps available and some kernels even provide their own apps.
Thanks all for some great information. Have a good base to set out exploring a little more.