Related
k i see the posts and i read all of them. the people that figuared it out HELP
getting error in mounting the cache and what not some one help plzz
Kush.Kush™ said:
k i see the posts and i read all of them. the people that figuared it out HELP
getting error in mounting the cache and what not some one help plzz
Click to expand...
Click to collapse
o am going to go out on a limb here and assume you are getting the fail pu errors? i understand your english isnt that well by reading your wording here, but what exactly did you do to lead up to this point so that we can help you if at all possible? and detailed info as to what your phones set up were before this error as well would help
irrelephant said:
o am going to go out on a limb here and assume you are getting the fail pu errors? i understand your english isnt that well by reading your wording here, but what exactly did you do to lead up to this point so that we can help you if at all possible? and detailed info as to what your phones set up were before this error as well would help
Click to expand...
Click to collapse
got my phone 4days ago rooted it using gfree put cwmr on there and then flashed cm.
CM worked was settign the phone up it turned off, booted and looped.
when i go into recovery im getting mounting errors ffor cache and system.
cant flash, wipe, restore or anything. i can get into hboot recovery and comp reads the phone
Kush.Kush™ said:
got my phone 4days ago rooted it using gfree put cwmr on there and then flashed cm.
CM worked was settign the phone up it turned off, booted and looped.
when i go into recovery im getting mounting errors ffor cache and system.
cant flash, wipe, restore or anything. i can get into hboot recovery and comp reads the phone
Click to expand...
Click to collapse
what is the exact error you are getting? do you have the engineering boot loader?
you need to be very detailed in the information you provide if you want help... as of yet you are yelling help with not too much info and there is no helping you with that little information
irrelephant said:
what is the exact error you are getting? do you have the engineering boot loader?
you need to be very detailed in the information you provide if you want help... as of yet you are yelling help with not too much info and there is no helping you with that little information
Click to expand...
Click to collapse
when in recovery im getting
E:cant mount /catche/recovery/command
E:cant mount /cache/recovery/log
E:cant open /cache/recovery/log
E:cant mount /cache/recovery/last_log
E:cant open /cache/recovery/last_log
my sd got formatted so lost EVERYTHING on it.
cant get PD15IMG to work. idk what to do anymore.
how can i tell if i have the engineering boot loader?
ok, when in HBoot, at the top it says Bootloader and then some numbers after that...
if those numbers are 0.85.2007 then you have the engineering bootloader which means you can run fastboot commands via your computer to your phone, which is what you will need if you can recover from this! when you rooted via Gfree, the only way to get this was to do the optional steps
irrelephant said:
ok, when in HBoot, at the top it says Bootloader and then some numbers after that...
if those numbers are 0.85.2007 then you have the engineering bootloader which means you can run fastboot commands via your computer to your phone, which is what you will need if you can recover from this! when you rooted via Gfree, the only way to get this was to do the optional steps
Click to expand...
Click to collapse
k my numbers are 0.86.0000 and when it is plugged in it says hboot usb plug. i used this bootloader to push gfree. sry there were people here distracting me. they all left so we good to go now
These cache errors in recovery usually indicate eMMC failure. This doesn't look good.
TeeJay3800 said:
These cache errors in recovery usually indicate eMMC failure. This doesn't look good.
Click to expand...
Click to collapse
i didnt even get to use cm i was setting up all my apps i just read this
"You can flash the PD15IMG via either recovery image. but it appears that if you use the 3.0.0.5, 3.0.0.6, or the 3.0.2.4 recovery image while trying to flash the PD15IMG (via the HBoot) it will brick your device. So that is not always a fail safe method."
but some people were able to pull outta it and i wanna do that!
TeeJay3800 said:
These cache errors in recovery usually indicate eMMC failure. This doesn't look good.
Click to expand...
Click to collapse
yep, they do, but there have been a few including myself to recover from it... so far he hasnt gotten the "fail pu" so there is a chance
irrelephant said:
yep, they do, but there have been a few including myself to recover from it... so far he hasnt gotten the "fail pu" so there is a chance
Click to expand...
Click to collapse
got that........
Kush.Kush™ said:
got that........
Click to expand...
Click to collapse
sorry to tell you the bad news then... your phone is a paperweight now
he does get the fail pu. just said so in a pm. if you get that error, there is no fix.
you can head over to THIS thread and read the all you want about it, but its not looking good for the home team!!!
irrelephant said:
sorry to tell you the bad news then... your phone is a paperweight now
Click to expand...
Click to collapse
lol mk gunan take it back n get a new one im still within my 14 days
irrelephant said:
you can head over to THIS thread and read the all you want about it, but its not looking good for the home team!!!
Click to expand...
Click to collapse
yep i got the bad one so i can take it back its a hardware issue =]]
THANK YOU guys!! will report on how the getting new phone goes!
k goodluck
JDV28 said:
k goodluck
Click to expand...
Click to collapse
new phone guys!!!!! =] you guys should talk tell me what to do
Help...
Hi,
I know this is an old post but I have the exact same setup with the same problem. Is there a way out?
Thanks,
Alan.
So I just got my OTA for 4.4 and downloaded the update. So I hit the restart and install button. The installing process ran like it supposed to be until the end part of it. The screen showed the word "error" with the android logo laying down. Then the phone just stayed like that and the screen not changing. So I decided to turn off the phone. Then I booted up the phone again, the google screen shows normally, but after that it shows the screen showing "no command" and I am stuck with that screen now and cannot go in. So I researched about it and find out I need to go to recovery mode. Then I hit the vol up and power button, then hit the recovery mode. But still, it shows the no command screen again.
Please help me... Thanks
Same issue here. Nexus 4 (rooted) OTA update from 4.3 to 4.4 failed. "No command" error. Please help
It's not pressing then together, have you tried this: http://forum.xda-developers.com/showpost.php?p=44388152&postcount=13
eksasol said:
It's not pressing then together, have you tried this: http://forum.xda-developers.com/showpost.php?p=44388152&postcount=13
Click to expand...
Click to collapse
It worked, now what do I do? I don't want to wipe all my data ._.
Is there a way to get the update and install it ?
GIANTLIZARDMAN said:
It worked, now what do I do? I don't want to wipe all my data ._.
Is there a way to get the update and install it ?
Click to expand...
Click to collapse
Check in the general section, there are a ton of info on this. i'll give you the links this time.
Follow the Scenario #1 instruction from here:http://forum.xda-developers.com/showthread.php?t=2145848
Or qbking77 video: http://forum.xda-developers.com/showthread.php?t=2537410
eksasol said:
Check in the general section, there are a ton of info on this. i'll give you the links this time.
Follow the Scenario #1 instruction from here:http://forum.xda-developers.com/showthread.php?t=2145848
Or qbking77 video: http://forum.xda-developers.com/showthread.php?t=2537410
Click to expand...
Click to collapse
I really don't know what to do, since I can't turn on my phone and get into the settings to check the USB Debugging I can't do anything with my phone plugged into my computer.... so.... what should I do? ((((
GIANTLIZARDMAN said:
I really don't know what to do, since I can't turn on my phone and get into the settings to check the USB Debugging I can't do anything with my phone plugged into my computer.... so.... what should I do? ((((
Click to expand...
Click to collapse
Just watch the video and follow its instruction, you enabled the adb sideload command in the stock recovery. It has nothing to do with USB Debugging whatsoever.
eksasol said:
Just watch the video and follow its instruction, you enabled the adb sideload command in the stock recovery. It has nothing to do with USB Debugging whatsoever.
Click to expand...
Click to collapse
Followed the instructions shown in the video, but when I try to install the 4.4 update it gives me an error:
set_metadata_recursive: some changes failed
E:Error in /tmp/update.zip
(Status 7)
Installation aborted.
Once again.... please help me.
GIANTLIZARDMAN said:
Followed the instructions shown in the video, but when I try to install the 4.4 update it gives me an error:
set_metadata_recursive: some changes failed
E:Error in /tmp/update.zip
(Status 7)
Installation aborted.
Once again.... please help me.
Click to expand...
Click to collapse
Status 7 usually means something wrong with the package (or your recovery version isn't compatible, which is not the case in this scenario). So either your file is corrupt or you downloaded the wrong package to update. What package you use depends on what version you come from. You can either use:
4.4-KRT16S-from-JWR66Y
4.4-KRT16S-from-KRT16O
If you are unsure, try the first one, then the other. It's most likely the first though or your package is corrupt, so redownload it: http://forum.xda-developers.com/showthread.php?t=2145848
Also try using wipe cache' option in the recovery to see if it help. (The factory reset option will wipe all your data.)
eksasol said:
Status 7 usually means something wrong with the package (or your recovery version isn't compatible, which is not the case in this scenario). So either your file is corrupt or you downloaded the wrong package to update. What package you use depends on what version you come from. You can either use:
4.4-KRT16S-from-JWR66Y
4.4-KRT16S-from-KRT16O
If you are unsure, try the first one, then the other. It's most likely the first though or your package is corrupt, so redownload it: http://forum.xda-developers.com/showthread.php?t=2145848
Also try using wipe cache' option in the recovery to see if it help. (The factory reset option will wipe all your data.)
Click to expand...
Click to collapse
Hi, I have tried both packages twice and re-downloaded them, and also wipe cache. I'm still getting the error status 7 installation aborted. I dont know what to do now. Please help im stuck.
I got it with the method in your sig. Flash factory image without wiping data (a different method) (short, if bootloader already unlocked). Thanks!
eksasol said:
Status 7 usually means something wrong with the package (or your recovery version isn't compatible, which is not the case in this scenario). So either your file is corrupt or you downloaded the wrong package to update. What package you use depends on what version you come from. You can either use:
4.4-KRT16S-from-JWR66Y
4.4-KRT16S-from-KRT16O
If you are unsure, try the first one, then the other. It's most likely the first though or your package is corrupt, so redownload it: http://forum.xda-developers.com/showthread.php?t=2145848
Also try using wipe cache' option in the recovery to see if it help. (The factory reset option will wipe all your data.)
Click to expand...
Click to collapse
tippingvan said:
Hi, I have tried both packages twice and re-downloaded them, and also wipe cache. I'm still getting the error status 7 installation aborted. I dont know what to do now. Please help im stuck.
Click to expand...
Click to collapse
GIANTLIZARDMAN said:
I really don't know what to do, since I can't turn on my phone and get into the settings to check the USB Debugging I can't do anything with my phone plugged into my computer.... so.... what should I do? ((((
Click to expand...
Click to collapse
I'm having the same problem.
I had 4.2 stock (JOP40C).
I used NRT to unlock and root.
I then got an OTA update for 4.3 (JWR66Y, I believe) and lost root.
I was going to re-root, but received another OTA for 4.4, so I figured I'd install it before re-rooting.
Unfortuntately, I didn't re-enable USB debugging, which may be my current issue.
The install encountered an error (Android on his back and little red triangle).
Now I can't get past Recovery.
I tried installing 4.4 from JWR66Ymanually via adb using methods described here and get the status 7 message shown above.
If I try installing 4.4 from KRT160 I get an error indicating my device has the wrong keys (seems to imply not the right starting version for the upgrade).
I've also tried flashing the factory JWR66Y ROM from the Google site using adb. When I do that, I get a "signature verification failed" message.
It looks like there may be a way around this if a flash a different recovery. Can I do that with adb?
I can't connect with NRT anymore. I ahve some backups I made with NRT, but am not sure how to load them without using NRT.
I can sideload with adb, but can't do much else. "fastboot devices" doesn't return anything.
Help!
Thanks!
Hi there,
I recently was going to install a new rom on my phone... I ended up doing a system restore on settings... And now the phone will not update the MTP driver, I tried it on another computer nothing so far. It also wiped my back up file in recovery!
I also tried going into the registry do to the "UPPERFILTERS" fix but it did not work for me!
Any suggestions on how I can somehow fix this!
Thanks.
ZishanMohiuddin said:
Hi there,
I recently was going to install a new rom on my phone... I ended up doing a system restore on settings... And now the phone will not update the MTP driver, I tried it on another computer nothing so far. It also wiped my back up file in recovery!
I also tried going into the registry do to the "UPPERFILTERS" fix but it did not work for me!
Any suggestions on how I can somehow fix this!
Thanks.
Click to expand...
Click to collapse
anyone?
reflash with odin does it reset philzrecovery?
I am about to reset my phone with odin as I cant connect the USB, the recovery will still be there after?
ZishanMohiuddin said:
the phone will not update the MTP driver
Click to expand...
Click to collapse
The phone won't update the MTP driver? You must mean PC. I can only assume that you are allergic to Google searches as good solutions are easily found.
Google search: reinstall MTP driver
Try disabling WMP temporarily as it often interferes. And if necessary you can remove the previous driver install in the registry. There are often two entries, one under HKLM and another under HKCU.
.
ZishanMohiuddin said:
I am about to reset my phone with odin as I cant connect the USB, the recovery will still be there after?
Click to expand...
Click to collapse
That depends on what you do with Odin. If you flash a full firmware, only your user files in the /data partition will persist. Your recovery would be wiped.
And a factory reset would delete user files.
.
fffft said:
The phone won't update the MTP driver? You must mean PC. I can only assume that you are allergic to Google searches as good solutions are easily found.
The link you provided didn't work. Could you provide me with a step by step guide. I tried two steps using the registry and watched various videos it didn't help. I am very new to this lol.
how do you remove previous driver driver?
if does not work, I got firmware files from sammobile to unbrick. Would my own back up from Philz be able to be used by odin?
Click to expand...
Click to collapse
ZishanMohiuddin said:
The link you provided didn't work.
Click to expand...
Click to collapse
The link worked in the post preview, but XDA likes to automerge posts and apparently that broke the hyperlink as well. I've fixed the link. But all you would have had to do was copy and paste the link.
That concerns me because if you don't notice /can't correct a minor formatting error in a link then your phone is at substantial risk. What I mean is that Odin is dangerous if you don't pay close attention to details. Be careful.
It's not hard to reinstall a driver. Just uninstall the old driver and realize that WMP can interfere with the reinstallation. If only a step by step guide will do, you will find lots of spoonfed guides in the Google search results.
I don't use Philz, I find TWRP to be much better. But I doubt that you could use Odin to restore a Philz backup. You'd need to reinstall Philz. Then restore your backup from recovery mode.
.
Decided to re-flash stock rom using odin with recovery file from sam-mobile website and up and running again. Thanks for help anyways!
.
The link you provided didn't work. Could you provide me with a step by step guide. I tried two steps using the registry and watched various videos it didn't help. I am very new to this lol.
how do you remove previous driver driver?
if does not work, I got firmware files from sammobile to unbrick. Would my own back up from Philz be able to be used by odin?[/QUOTE]
fffft said:
The link worked in the post preview, but XDA likes to automerge posts and apparently that broke the hyperlink as well. I've fixed the link. But all you would have had to do was copy and paste the link.
That concerns me because if you don't notice /can't correct a minor formatting error in a link then your phone is at substantial risk. What I mean is that Odin is dangerous if you don't pay close attention to details. Be careful.
It's not hard to reinstall a driver. Just uninstall the old driver and realize that WMP can interfere with the reinstallation. If only a step by step guide will do, you will find lots of spoonfed guides in the Google search results.
I don't use Philz, I find TWRP to be much better. But I doubt that you could use Odin to restore a Philz backup. You'd need to reinstall Philz. Then restore your backup from recovery mode.
.
Click to expand...
Click to collapse
I did check out your hyperlink lol I just googled searched it. I thought you sent a link not a google search. I went into three different step by step guides regarding the issue, it was just one of those days where basics things just didn't work out lol.
I got fed up so I did I ended up doing a full recovery I just wanted to avoid that process since I know there was a simpler method.
This is for @newbiepixelv1 to help Him/Her with "Camera can't connect".
Since This thread was going out of topic and to keep it clean, I made this for @newbiepixelv1 .
History so Far :
newbiepixelv1 said:
Please post Nougat OTA update if released. Please.
P.S : After the April 16 update the camera doesn't seem to connect anymore.
Can't root ..any other solutions if possible.. Please.
Please reply, Thanks.
Click to expand...
Click to collapse
Dark❶ said:
@newbiepixelv1
newbiepixelv1 said:
Please post Nougat OTA update if released.
Click to expand...
Click to collapse
Nougat OTA update is NOT released YET, & I have NO idea if it will.
newbiepixelv1 said:
P.S : After the April 16 update the camera doesn't seem to connect anymore.
Can't root ..any other solutions if possible.
Click to expand...
Click to collapse
Google Camera is Kind of BUGGY & I am not getting what you said "camera doesn't seem to connect anymore".
Even I have Camera Issues Like while taking a Photo or Viewing an Image, it sometimes Force Close.
But you can try this :
1.Go to "Setting=>Apps=>Camera" then in App info go to "Storage"
and press "CLEAR DATA". Doing so will ERASE setting of camera app.
if above does not work then Below
2.Factory Reset.
Go to "Setting=>Backup & reset=>Factory data reset" & press "RESET PHONE".
Doing So will ERASE all your DATA.
the above is "Soft Reset", there is "Hard Reset" by using Recovery mode,
but decided not to tell you coz you are "NewBie" aka "NOOB"(Which I am still , & Have to learn a lot)
3.Flashing Marshmallow using SP flash tool.
But can not tell you again coz of above reason.
BUT if you want to know any of those method you may tell me.
newbiepixelv1 said:
Please reply, Thanks.
Click to expand...
Click to collapse
You are Welcomed :good:
Click to expand...
Click to collapse
newbiepixelv1 said:
The error it shows is : Camera can't connect
Sorry if you didn't get that earlier.
I have tried soft reboot and hard reboot.
I have even tried rooting but have failed..
So, if you could help me how to root Lava Pixel V1.
I have tried ADB and Fastboot but the TWRP doesn't install properly. I may have the wrong version.
Please If you could post download link for correct one.
Thanks.
Click to expand...
Click to collapse
"Camera can't connect" Might be a major Issue.
If still under warranty then go to nearest Lava Service Center.
And by Rooting, this problem may not be solved.
First tell me if it's under warranty or not , then i'll tell you how to install TWRP.
Dark❶ said:
This is for @newbiepixelv1 to help Him/Her with "Camera can't connect".
Since This thread was going out of topic and to keep it clean, I made this for @newbiepixelv1 .
History so Far :
"Camera can't connect" Might be a major Issue.
If still under warranty then go to nearest Lava Service Center.
And by Rooting, this problem may not be solved.
First tell me if it's under warranty or not , then i'll tell you how to install TWRP.
Click to expand...
Click to collapse
No the warranty has expired. I have no problem rooting ..but im unable to root it.i have tried earlier but failed installing SuperSU.
newbiepixelv1 said:
No the warranty has expired. I have no problem rooting ..but im unable to root it.i have tried earlier but failed installing SuperSU.
Click to expand...
Click to collapse
OK.
I am assuming that you Know & have done the following :
1. You know how to use ADB & Fastboot.
2. Installed ADB drives.
Use this Tutorial Here.
Install "System Wide" since you need FastBoot.
3. You have Unlocked OEM lock by using "oem unlock".
Without this you wont be able to flash TWRP.
This will erase all your data..
Without doing the above stuff its useless going forward.
So when you are ready let me Know.
Pardon Me Plz.
Sorry Wrong Thread.
.
Hello!
I'm in serious troubles... So I tried to update my phone and now I have next problems...
Phone is locked
FRP is locked
- This 2 means I cant unlock bootloader or anything via fastboot
I can boot into android, but I cant get into it, because I have security email and I have to enter my email, problem is that, that new update's keyboard doesn't work, instead of keyboard it opens Google Voice Typing, from which I can't enter sh*t....
So any suggestions please? I really need that phone... Thanks :crying::crying:
Try to install again the system with dload method.
Potato997 said:
Try to install again the system with dload method.
Click to expand...
Click to collapse
But I had problems with keyboard before... Why this? Help please
You probably messed up something during the installation, that's why you should retry
Potato997 said:
You probably messed up something during the installation, that's why you should retry
Click to expand...
Click to collapse
I reinstalled, still no keyboard, why is this happening? What should I do? Do you have any other EMUI ROM to install over that one, just to be compatible?
Please describe what you did in details.
Potato997 said:
Please describe what you did in details.
Click to expand...
Click to collapse
So I started with downloading:
From: "https://forum.xda-developers.com/huawei-p9lite/development/android-7-emui-5-0-vns-l-cb360-links-t3565117"
I downloaded section "VNS-L21C185B360" - This is my phone btw
I downloaded "http://update.hicloud.com:8180/TDS/d...ull/update.zip"
I unrared it, puted it in dload folder on SD and force update via 3 button method, after that I got success message, then when I booted into Android, really wierd thing was, that it booted up like normaly, really fast, no preloading, no keyboard, I need to confirm android factory reset with my old email (which I can't enter, because only google voice typing is on)
Btw, I factory reseted 10x before installing update and clearing cache
You missed the additional package.. grab it from here:
https://forum.xda-developers.com/huawei-p9lite/how-to/guide-switch-to-c188-installing-b360-t3577575
Potato997 said:
You missed the additional package.. grab it from here:
https://forum.xda-developers.com/huawei-p9lite/how-to/guide-switch-to-c188-installing-b360-t3577575
Click to expand...
Click to collapse
But how do I do that? I mean, can be 2 same files in same folder? Because I need to extract, so how do I do that without reboot? I need to change my SD to computer meanwhile to extract "data full"....
Potato997 said:
You missed the additional package.. grab it from here:
https://forum.xda-developers.com/huawei-p9lite/how-to/guide-switch-to-c188-installing-b360-t3577575
Click to expand...
Click to collapse
It's still saying "Verify your account" and still have keyboard glitch :crying::crying: Please help me, I really need that phone
Cmon, srsly nobody? Why not helping when someone needs help?
MatoXD said:
Cmon, srsly nobody? Why not helping when someone needs help?
Click to expand...
Click to collapse
Have a little patience bro,
Try B380 of c432. Here you go the full guide.. https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932
Potato997 said:
Have a little patience bro,
Try B380 of c432. Here you go the full guide.. https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932
Click to expand...
Click to collapse
But this is for TWRP users, I have only Hua**** eRecovery, which doesn't work :/
Potato997 said:
Have a little patience bro,
Try B380 of c432. Here you go the full guide.. https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932
Click to expand...
Click to collapse
Well, what should I do now? Please help
Potato997 said:
Have a little patience bro,
Try B380 of c432. Here you go the full guide.. https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932
Click to expand...
Click to collapse
Can you answer? I need help
First rollback to emui 4 so you can access to your phone, then use a TWRP method
Potato997 said:
First rollback to emui 4 so you can access to your phone, then use a TWRP method
Click to expand...
Click to collapse
How am I suppost to do that? Link, steps please... Like you know, I can only flash on stock EMUI 3 button method, I have currently B360 ROM, I can't downgrade easily or uprgrade, I get incompability...