Related
Since December 2013 I have Lenovo G505s laptop that came with Windows 8 pre-installed. Contacted Lenovo to get a Windows 8.1 upgrade disk. No avail.
So I decided to upgrade the laptop via Windows Store to Windows 8.1. The upgrade took hours. Best: Had no problems with Windows afterwards. All drivers are working. Thank God.
The laptop comes with a recovery drive, but this - by nature - only holds a copy of Windows 8 pre-installed. Not useful when it comes to refresh/restore the laptop - currently Windows 8.1.
Because the recovery drive will include Windows 8 pre-installed, I have need to upgrade to Windows 8.1 again after I refresh or reset my laptop. At least thus is stated by Microsoft here (Step 8)
Anybody can tell me how to refresh the recovery partition? I won't work with USB stick.
MS has no consumer-based solution for what you're asking. For IT and OEMs, there are commandline tools to capture and deploy WIMs (Windows images). To go this route, first use DISM to capture (back-up) your current setup into a WIM file. Next, update the System (ESP) partition, then the WinRE partition with files from Win 8.1 boot disk. Finally, apply the captured WIM into the recovery partition, overwriting the old WIM. Commandline tools to do these are dism, reagentc, et al. All of the needed info are available on Technet. Start at the below link, and branch out as needed:
http://technet.microsoft.com/en-us/library/hh825072.aspx
The vastly easier (and faster, and more efficient) solution is to forgo the MS solution, and simply use a good image backup solution. I use TrueImage backup, and there are many others. You can back up directly to a USB storage device at any time, obviating the need for a recovery partition. Recovery is just a USB boot key away.
If opting for the latter, aside from reclaiming space from recovery partition (30GB), you can also reclaim space from the now-obsolete "driver" partition (20GB).
Will try the next days what you suggested and report whether could solve my issue succesfullyl. For now, thanks a lot.
I've recently acquired the Pipo W3F tablet and after switching from Windows 8.1 to Android I wanted to go back to Windows.
I'm able to bring up the OS switcher but there is no Windows icon. Anyone know what is causing this and how to fix? Thanks.
Just a wild guess really, but this could relate too the file-system of the harddrive, unless im mistaken Android uses 'vfat' and 'yaffs2', and you prolly cant install windows on either of those.
That said, im not sure how you would overcome this (or how you even got it to dual boot, since looking at the PIPO site it doesnt do that out of the box) but you will prolly have to flash a firmware image thats windows only again.
suicidal.banana said:
Just a wild guess really, but this could relate too the file-system of the harddrive, unless im mistaken Android uses 'vfat' and 'yaffs2', and you prolly cant install windows on either of those.
That said, im not sure how you would overcome this (or how you even got it to dual boot, since looking at the PIPO site it doesnt do that out of the box) but you will prolly have to flash a firmware image thats windows only again.
Click to expand...
Click to collapse
I also got the tablet recently and ran into the same problem. There was no way for me to get back into Windows. I had to re-flash both Android and Windows. It wouldn't let me re-flash just Windows, I was getting an error saying it cannot create a "scratch" directory. I think when re-flashing Android it reset all the partitions. Once the Android OS was installed, the Windows flashed without any problem.
Good luck.
I have Lenovo Yoga 2 Tablet 10" with windows 8.1 (1051L)
its hard to use windows 8.1 on a tablet.
can i install Android on my tablet or even better ... dual boot with windows and android possible on this tablet?
it' fantastic. I have yoga 2 10 with android 1050L. It's very speed. but i think the problem is bootloader mods.
I think I would rath:cyclops:er run Android as the primary OS and the run Windows as a VM.
pateken said:
it' fantastic. I have yoga 2 10 with android 1050L. It's very speed. but i think the problem is bootloader mods.
Click to expand...
Click to collapse
How do you do that ? I need WM for a private app.
Successfully booted Android 4.4 R3 X86 from USB...
Hey all,
I have successfully managed to boot the 4.4 R3 efi img file from Android X86 on my 1051F. It's working pretty well, very smooth, but pretty much none of the hardware works (GPS, WIFI, Bluetooth, rotation, sound, etc).
Anyone have any idea how we could fix that? The process for getting it to boot is actually pretty easy. You download the img file from the android x86 site, use Rufus to create a bootable USB key (being sure to set it to GPT for EFI). You then need to disable secure boot on the tablet (instructions found various places on the net if you don't know how), shutdown the tablet, connect the USB key via OTG cable to the tablet, hold the volume up and power on. You will get into the NOVO menu. Once there, select boot menu and boot from the USB key (if it's not listed you probably didn't create the USB key in GPT, or it was detected when you powered on).
In order for it to boot into Android, you'll need a USB keyboard connected to select the android option. Alternately, you can just modify grub.cfg to set a default option and a timeout (which is what I did).
I'd really love it if anyone can provide some input on how to fix the missing drivers. Since the 1050 tablet is basically the identical hardware, I would think it should be easy to get the drivers over to this image, but I just don't know how.
Any help greatly appreciated!
mantatia said:
Hey all,
I'd really love it if anyone can provide some input on how to fix the missing drivers. Since the 1050 tablet is basically the identical hardware, I would think it should be easy to get the drivers over to this image, but I just don't know how.
Any help greatly appreciated!
Click to expand...
Click to collapse
I know it sounds basic, but have you tried getting the drivers from here: http://support.lenovo.com/us/en/products/tablets/yoga-series/yoga-tablet-2-1051
I wanted to do a fresh install of Windows 10 and I got the drivers from this place.
tejaswy said:
I know it sounds basic, but have you tried getting the drivers from here:
I wanted to do a fresh install of Windows 10 and I got the drivers from this place.
Click to expand...
Click to collapse
Thanks for the suggestion, but I'm pretty sure they only provide Windows drivers there. From my experience, Android drivers tend to need to be part of the image you install from, though I'm sure more advanced users could probably add drivers to a live install.
I'll take a look anyway, just to make sure, though.
EDIT: Just checked and, as I thought, only Windows 8 and 10 drivers. Realistically Lenovo don't support running Android on the 1051F, so it's pretty unlikely that they'd ever post drivers like that, unfortunately.
mantatia said:
Thanks for the suggestion, but I'm pretty sure they only provide Windows drivers there. From my experience, Android drivers tend to need to be part of the image you install from, though I'm sure more advanced users could probably add drivers to a live install.
I'll take a look anyway, just to make sure, though.
EDIT: Just checked and, as I thought, only Windows 8 and 10 drivers. Realistically Lenovo don't support running Android on the 1051F, so it's pretty unlikely that they'd ever post drivers like that, unfortunately.
Click to expand...
Click to collapse
My apologies. I misread the post. I thought you were looking for the windows drivers. I am sorry to have given you unnecessary hope!
What's this got to do with the Tab S?
wanted modified grub.cfg, please share
wanted modified grub.cfg, please share
mantatia said:
Hey all,
I have successfully managed to boot the 4.4 R3 efi img file from Android X86 on my 1051F. It's working pretty well, very smooth, but pretty much none of the hardware works (GPS, WIFI, Bluetooth, rotation, sound, etc).
Anyone have any idea how we could fix that? The process for getting it to boot is actually pretty easy. You download the img file from the android x86 site, use Rufus to create a bootable USB key (being sure to set it to GPT for EFI). You then need to disable secure boot on the tablet (instructions found various places on the net if you don't know how), shutdown the tablet, connect the USB key via OTG cable to the tablet, hold the volume up and power on. You will get into the NOVO menu. Once there, select boot menu and boot from the USB key (if it's not listed you probably didn't create the USB key in GPT, or it was detected when you powered on).
In order for it to boot into Android, you'll need a USB keyboard connected to select the android option. Alternately, you can just modify grub.cfg to set a default option and a timeout (which is what I did).
I'd really love it if anyone can provide some input on how to fix the missing drivers. Since the 1050 tablet is basically the identical hardware, I would think it should be easy to get the drivers over to this image, but I just don't know how.
Any help greatly appreciated!
Click to expand...
Click to collapse
1. Download Android Nougat 7.0 ISO file[Developed by Android x86].
2. Download Rufus win App to Create Bootable/Live USB.
3. Insert USB with Minimum 4GB and select Downloaded ISO file and finally start.
4. After Finishing, Create New/ Separate Partition in PC for Android to be Installed with Minimum of 16GB Disk Size and Format it as FAT32.
5. After formatting, Reboot PC.
6. Boot PC from USB.
7. Select Install android x86 to HDD.
8. Now In bluescreen Select the Separate Fat32 formatted Partition to Install.
9. Do not Format.( I didn't formatted and it works fine).
10. Install Boot Loader GRUB.( It will replaces default Windows Bootloader).
12. Next it shows up that your are having Windows Partition and asked to create boot item for windows. Select Yes for that else you won't be able to boot into Windows next time.
13. Next Select Skip for EFI GRUB2.(I Skipped and worked for me, I think because I'm having Legacy PC).
14. Then Select Yes to Create Read/Write enabled system directory.
15. Now To create data.img, select yes and then Enter the Size you need for System Memory in MBs (1GB-1024MB).
16. Now Accept Reboot and then Boot Android from GRUB Menu.
17. Thats all . You have Successfully installed Android 7.0 nougat in your PC HDD.
Also I Made Video Tutorial in YouTube for Better Understanding. You can Checkout if you don't understand or if any error pops.
https://www.youtube.com/watch?v=o90aPj4zT-M(TechGeekShan).
Follow Me
http://facebook.com/techgeekshan
http://twitter.com/techgeekshan
https://www.reddit.com/r/TechGeekShan/
http://instagram.com/techgeekshan/
http://www.techgeekshan.in/
Wow thanx mate, will give it a try and will give a feed back.
Sent from my SM-G935F using XDA-Developers mobile app
silverrum said:
Wow thanx mate, will give it a try and will give a feed back.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Yeah.. You are welcome and we must Appreciate the Developer who developed Android Nougat x86..
Don't work for me((( Laptop wan't boot after installation...
gmikes said:
Don't work for me((( Laptop wan't boot after installation...
Click to expand...
Click to collapse
Its because of EFI/UEFI Computers
Why not work
Shanmukarajan said:
Its because of EFI/UEFI Computers
Click to expand...
Click to collapse
Why not Work ?
If I install it on my PC, do I access google play store like normal?
successfully installed on Z3735F Bay Trail-T windows 10 tablet. I don't need windows 10 OS anymore, so made one partition and install Android 7. It books OK, WIFI works fine. BUT!!!!! All the physical buttons don't work. Power button doesn't work, so there is no way to turn off the system. Volume Up and Down button also doesn''t work. But touch screen works fine. How to solve this problem? any idea? My tablet is Unbranded Tablet 10.1 from Best Buy
hey,
i got it up & running on my uefi windows 10 lenovo yoga (after some struggle i also have dual-boot). my question - how do i get gapps and supersu? it's not like you could simply flash some zips, as there is no recovery
No Playstore!! Browser does not download files!!!
So after wasting 400mb of data and roughly 30 minutes of my time, I discover that there is no preinstalled PlayStore, the preinstalled browser will not download APKs and trying to install apps from the online MarketPlace only discovers devises that the email used to Sign In with is associated to, not the device this is installed on.
These things SHOULD by all ethical means be stated in the description to prevent others from wasting both their time as well as their data.
I want to see a solution to these problems Shanmukarajan. Should you decide to neglect this issue, I won't hesitate to have this post reported to the moderators.
Thank you in advance for your prompt support on the matter.
Stevo | True.Tech.Tabs
+1 360 **** ***
there is just one issue.
you can not create a data.img file that is larger than 4GB on a fat32 partition...
how do we fix that?
It’s installs fine but when restarts windows is just starting every time and it’s not coming up with step 12 asking me about windows partition and creating boot item
I performed the installation process about 10 times with different settings but none of them seem to install Android on my HDD. The live version works and there are no errors whatsoever, but even after installation there is never an option to boot the installed Android. Only live, debug or again option to install the OS. Does anyone know the solution?
Sent from my Xperia X Compact using XDA Labs
Godecki said:
I performed the installation process about 10 times with different settings but none of them seem to install Android on my HDD. The live version works and there are no errors whatsoever, but even after installation there is never an option to boot the installed Android. Only live, debug or again option to install the OS. Does anyone know the solution?
Sent from my Xperia X Compact using XDA Labs
Click to expand...
Click to collapse
Have you tried selecting yes to GRUB 2 during installation? It's been a little while since I went through the process, but I believe that was what I had to do to get it up and running.
Godecki said:
I performed the installation process about 10 times with different settings but none of them seem to install Android on my HDD. The live version works and there are no errors whatsoever, but even after installation there is never an option to boot the installed Android. Only live, debug or again option to install the OS. Does anyone know the solution?
Click to expand...
Click to collapse
Yeah I have the same issue with my Sony VAIO Duo 11. To start from power off I have to hit the special Duo Assist button, then F11 to boot from usb, then go thru the (re) install every time, so boot takes a couple of minutes, but it always bring me back to the same great working Android with all apps and setting unchanged. I don't understand, but I just happened onto it. Be sure to not format or install any grub (not really sure about grub or grub2), but yes to make it writeable. Then you get an awesomely fast Android.
I don't even want Windows on that machine, but I'm afraid to kill all the partitions and start from scratch as the Duo has some weird builtin Windows boot stuff hard wired. I'm not sure if Android could boot without the Windows partitions.
When I am creating a new partition with 16 GB of space does it mean that Android is going to use just this partition and 16 GB or is it just for the installation files and Android will see my whole HDD as the internal storage?
Could you please let me know how you got it up and running? I am on a UEFI yoga as well, but after the installation,
grub doesn't show up and my computer boots automatically into Windows
Thanks in advance
bombaglad said:
hey,
i got it up & running on my uefi windows 10 lenovo yoga (after some struggle i also have dual-boot). my question - how do i get gapps and supersu? it's not like you could simply flash some zips, as there is no recovery
Click to expand...
Click to collapse
ZOOMA7997 said:
Could you please let me know how you got it up and running? I am on a UEFI yoga as well, but after the installation,
grub doesn't show up and my computer boots automatically into Windows
Thanks in advance
Click to expand...
Click to collapse
Did you change the boot sequence in bios? Select android to boot 1st, then Grub should ask you which os you want to launch. I installed grub 2. I also went with the triple boot. My laptop is an Asus x401a with windows 7. Along with ubuntu and android. x86 Nougat.
A little help here mates,
I installed it alongside a windows 7 ultimate.
Gave it an 80gb Partition (fat32)
So I'm planning a dual boot here.
Here's my Steps:
used rufus to create bootable from android-x86-8.1-r1.iso
booted to Flash drive
installed android to 80gb partition (with grub/windows boot entry/ and data image of 2048MB)
after installation, Reboot to test boot options
grub didn't show up, booted directly to win7
Did some researches, and from those researches I should disable SECURE BOOT, but bios don't have that option.
Also tried EasyUEFI Tool which didn't even work in windows 7
Also, no settings for UEFI or Legacy.
Boot Order doesn't show Windows bootmanager or grub too, only HDD....
I installed android in ASUS Eee Notebook Laptop 1201b
I think the only problem here is grub cant load, but I run out of solutions, so here I am asking for help.
every android on work fine in my tablet(z3735f) but there is a bug in every os no sound in headphone any one tell me how to fix it
Hi,
How to make a PC Triple Boot Android, Windows 7 and Windows 10?
Thanks
M. Al said:
Hi,
How to make a PC Triple Boot Android, Windows 7 and Windows 10?
Thanks
Click to expand...
Click to collapse
You can use programs like Partition Magic
Maay gaad, I thought this is a tutorial thread
sure u have 3 hard disk with different Operating System (maybe)
Wondering
How it could be done.
zanodor said:
How it could be done.
Click to expand...
Click to collapse
By partitioning your hard drive and then installing each operating system in each partition then use the Grub bootloader software to allow you to choose which of the 3 systems you want to boot when you power on.
https://www.quora.com/Is-it-possible-to-install-Linux-with-Android-and-windows-10-dual-boot-easy-way
Sent from my SM-S767VL using Tapatalk
Hi,
You can also use Virtualbox or other virtualization software to create multiple virtual machine and RUN them on a single machine.
If your computer has good amount of RAM, then you utilize this Virtualbox software. It really works fine. Instead of creating different partition, i think it will be much better option.
Thanks,
Hope it helsp
ziafimawad said:
sure u have 3 hard disk with different Operating System (maybe)
Click to expand...
Click to collapse
I am curious how to do it?
Saenyu67 said:
I am curious how to do it?
Click to expand...
Click to collapse
You can use 1 hard drive or 2 hard drives or 3 hard drives, it works the same regardless of how many you use. It's easily done with just 1 hard drive. If you look at my previous post a few posts back in this thread, you will see a link with instructions to partition your hard drive to create a partition for each of the OS's that you want to install, then you install each operating system in each separate partition that you choose to install them in.
Sent from my SM-S767VL using Tapatalk
How to make a PC Triple Boot Android, Windows 7 and Windows 10
Windows booting is a simple process. You can easily boot your windows 7 OR Windows 10
you can useing some free tools for booting window 10 and windows 7.
I can explained here how to boot a drive easily. I think it will benefit you. For than messege me personally.
Thank you very much.
mdakashhossain said:
Windows booting is a simple process. You can easily boot your windows 7 OR Windows 10
you can useing some free tools for booting window 10 and windows 7.
I can explained here how to boot a drive easily. I think it will benefit you. For than messege me personally.
Thank you very much.
Click to expand...
Click to collapse
You don't understand what they are trying to do.
Sent from my SM-S767VL using Tapatalk
for android, you can use "bluestacks" on windows
So you want to use Windows 10, Windows 7 and Android on PC. For that first create 3 or 4 partitions one for windows 10, one for windows 7 and one for android. Install Windows 10 and Windows 7 on separate partitions and you will see that you have a option to boot into windows 7 or 10. now to install Android use a android based OS such as Prime OS and install it on a separate partition. You can use the pre installed grub or you can use grub2win to get all operating systems that you need
mdakashhossain said:
How to make a PC Triple Boot Android, Windows 7 and Windows 10
Windows booting is a simple process. You can easily boot your windows 7 OR Windows 10
you can useing some free tools for booting window 10 and windows 7.
I can explained here how to boot a drive easily. I think it will benefit you. For than messege me personally.
Thank you very much.
Click to expand...
Click to collapse
Hey there I'm also interested in this I currently have garuda Linux and can't get Windows 10 on
I've done this for a while, my easiest solution is:
1. Make 3 or 4 partitions. Windows 10, windows 7, data partition, and a Linux partition. (There may more created e.g. a system partition). Dont touch the data partition throughout all of this except for storing your OS ISO, liveboot ISO, other program files etc.
2. Install windows 7 on windows 7 partition.
3. Install windows 10 on windows 10 partition. Can be installed from windows 7. Let windows handle making a windows bootloader which can now boot into windows 7 or 10.
4. Create a live USB in ine of your windows. I've been using Ubuntu but used Fedora for years prior. If you aren't sure if you need x64 then go woth the 32 bit x86 architecture (useful to be able to boot on 32 and 64 bit machines). Now boot up your live USB into Linux and install automatically onto Linux partition. You'll now have a GRUB bootloader which can boot into Linux or into your windows bootloader.
5. Install android emulator. I used Linux as I felt I would get better performance emulating android in Linux, this may or may not be true.
There will things that you might find as a nuisance, for example when I boot into windows 7 from windows 10, I need to boot into the GRUB to windows bootloader, select windows 7 and it reboots again back into GRUB and then into windows 7. Not a big deal unless you want to switch OS a lot. If this is the case, you may want to just emulate to begin with. I have a laptop with *ok* processor and RAM, not the best for emulating another OS.
There is many options - you could even install Linux within windows if you so choose. Ultimately the best path will be based on your knowledge, specs of your PC ( power, ram, disk space, disk type [fora mount of partitions], BIOS/UEFI, etc. The method I laid out is the most automated and easiest method I have come up with. Don't try installing windows on top of Linux, you'll cause a headache fixing everything for your Linux system. But then again, everything I've done in Linux the hard way has helped me to understand Linux better. I've just found that even laying out all of the partitions manually for Linux can be challenging, especially if you only have 1 computer and your data is not backed up elsewhere. Start with a blank machine if you can, and have another computer on hand, then you'll have an easy time starting over if necessary. Theres still so many more options of how to do what you are asking... good luck and happy tripple booting
Flash-ARMy said:
I've done this for a while, my easiest solution is:
1. Make 3 or 4 partitions. Windows 10, windows 7, data partition, and a Linux partition. (There may more created e.g. a system partition). Dont touch the data partition throughout all of this except for storing your OS ISO, liveboot ISO, other program files etc.
2. Install windows 7 on windows 7 partition.
3. Install windows 10 on windows 10 partition. Can be installed from windows 7. Let windows handle making a windows bootloader which can now boot into windows 7 or 10.
4. Create a live USB in ine of your windows. I've been using Ubuntu but used Fedora for years prior. If you aren't sure if you need x64 then go woth the 32 bit x86 architecture (useful to be able to boot on 32 and 64 bit machines). Now boot up your live USB into Linux and install automatically onto Linux partition. You'll now have a GRUB bootloader which can boot into Linux or into your windows bootloader.
5. Install android emulator. I used Linux as I felt I would get better performance emulating android in Linux, this may or may not be true.
There will things that you might find as a nuisance, for example when I boot into windows 7 from windows 10, I need to boot into the GRUB to windows bootloader, select windows 7 and it reboots again back into GRUB and then into windows 7. Not a big deal unless you want to switch OS a lot. If this is the case, you may want to just emulate to begin with. I have a laptop with *ok* processor and RAM, not the best for emulating another OS.
There is many options - you could even install Linux within windows if you so choose. Ultimately the best path will be based on your knowledge, specs of your PC ( power, ram, disk space, disk type [fora mount of partitions], BIOS/UEFI, etc. The method I laid out is the most automated and easiest method I have come up with. Don't try installing windows on top of Linux, you'll cause a headache fixing everything for your Linux system. But then again, everything I've done in Linux the hard way has helped me to understand Linux better. I've just found that even laying out all of the partitions manually for Linux can be challenging, especially if you only have 1 computer and your data is not backed up elsewhere. Start with a blank machine if you can, and have another computer on hand, then you'll have an easy time starting over if necessary. Theres still so many more options of how to do what you are asking... good luck and happy tripple booting
Click to expand...
Click to collapse
Yes, exactly what I was indirectly suggesting. I've done it the way you describe before, but, alternatively, you can just create 2 partitions on your hard drive then install Win10 and Win7 in those partitions then create a Linux live USB or even install a full Linux distro on a fairly large USB flashdrive/external hard drive(preferably something that has solid state storage, this enables faster booting and performance and allows installing drivers and packages) and then go into BIOS and set your boot priority to boot from USB first, save changes and exit. Then, when you want to boot Linux you just connect your external drive/USB then reboot the device and it will automatically boot Linux without having to use grub and when the Linux drive isn't connected you will be able to boot 10 and 7 via windows bootloader. A little more round about but makes booting back and forth between operating systems.
Droidriven said:
Yes, exactly what I was indirectly suggesting. I've done it the way you describe before, but, alternatively, you can just create 2 partitions on your hard drive then install Win10 and Win7 in those partitions then create a Linux live USB or even install a full Linux distro on a fairly large USB flashdrive/external hard drive(preferably something that has solid state storage, this enables faster booting and performance and allows installing drivers and packages) and then go into BIOS and set your boot priority to boot from USB first, save changes and exit. Then, when you want to boot Linux you just connect your external drive/USB then reboot the device and it will automatically boot Linux without having to use grub and when the Linux drive isn't connected you will be able to boot 10 and 7 via windows bootloader. A little more round about but makes booting back and forth between operating systems.
Click to expand...
Click to collapse
I had a project to run Windoes 10 on an SD card, which proved to be more difficult than I tbought it would be. I didn't think it should have been difficult, but it seems software amd hard tales measures to prevent this from being possible / "easy". Linux is quite easy to use a live USB, so I've done that quite a bit (I'd keep a 32 bit live USB on my Keychain). I don't think I was ever able to update drivers or install updates to the live USB, however I didn't make much of an effort too. I basically used it as a save my ass tool, which it certainly did come in useful quite often in the course of my personal/school/work computer needs.
Flash-ARMy said:
I had a project to run Windoes 10 on an SD card, which proved to be more difficult than I tbought it would be. I didn't think it should have been difficult, but it seems software amd hard tales measures to prevent this from being possible / "easy". Linux is quite easy to use a live USB, so I've done that quite a bit (I'd keep a 32 bit live USB on my Keychain). I don't think I was ever able to update drivers or install updates to the live USB, however I didn't make much of an effort too. I basically used it as a save my ass tool, which it certainly did come in useful quite often in the course of my personal/school/work computer needs.
Click to expand...
Click to collapse
Instead of installing Linux live on USB, you can do a full installation of Linux on the USB the same as you would when installing Linux on hard drive. A Live USB can be setup with a persist partition to provide a bit of storage on the USB but it isn't enough to do anything with that is useful, that is why it is better to just install the distro on USB instead of using USB to run Linux live.