[Q] How to make LG HBS-730 Bluetooth work? - G2 Q&A, Help & Troubleshooting

How can we make the LG HBS-730 Blue tooth headset/headphone work with the LG G2 (clearly an aptx phone too)?
LG Voicemate shows "connected device does not support Bluetooth voice recognition"
With Stock ROM but rooted phone
1. It pairs etc just fine BUT the call button appears to do nothing?
2. Assuming we can get the call button to work how to get google to be the dialler (not sure what default is as headset/phone's call button appears to not function)

The Tone+ are compatible with the G2, By hitting the call button on my set I get the stock android voice control.
If I swipe up from the home button I can just say "ok google" through the tones and it works.

EGBTMagus said:
The Tone+ are compatible with the G2, By hitting the call button on my set I get the stock android voice control.
If I swipe up from the home button I can just say "ok google" through the tones and it works.
Click to expand...
Click to collapse
huh? how is it possible that yours does that yet mine doesnt?
all the other buttons work except for the call button

Mine works perfect. Works with AptX too after I forced that enabled on my phone. Voicemate and Google. Phone button brings up stock android voice commands. VS980.

Steamer86 said:
Mine works perfect. Works with AptX too after I forced that enabled on my phone. Voicemate and Google. Phone button brings up stock android voice commands. VS980.
Click to expand...
Click to collapse
hmmm wonder if Verizon has slightly different software?.....
How did you force it to work with AptX and why force it when the box clearly states AptX? (least the AU model D802TA does)

evangelionpunk said:
hmmm wonder if Verizon has slightly different software?.....
How did you force it to work with AptX and why force it when the box clearly states AptX? (least the AU model D802TA does)
Click to expand...
Click to collapse
I'm on LG-D800 AT&T and aptX was not enabled when I bought it. Maybe yours is. Look at this post on how to check is aptX enabled or not and if not how to enable it. BTW, I'm on CleanROM and call button on HBS730 initiates voice dialer.
I forgot a link;
http://forum.xda-developers.com/showthread.php?p=47084027

thanks alex I went ahead and followed those steps.
I also unpaired and repaired the device and now HOLDING the call button down (as opposed to just pressing it) autocalls the last number dialled. hmmmm
Voicemate still doesnt recognise it

That is how holding the button is suppose to work. Given it a couple quick clicks? There is a slight lag every once and a while due to sleep. Odd yours is not working... Also, Verizon's isn't displayed or enabled out of the box.

Steamer
On HTC One just have to click it once (not hold it down for a second or so).
Just checked and on CM single click does result in voice dialler popping up etc ie working properly hmmm

evangelionpunk said:
thanks alex I went ahead and followed those steps.
I also unpaired and repaired the device and now HOLDING the call button down (as opposed to just pressing it) autocalls the last number dialled. hmmmm
Voicemate still doesnt recognise it
Click to expand...
Click to collapse
There is one more thing you should try on stock ROM. Disable Voice Mate. It's useless anyway. Maybe LG HBS730 is having a conflict with it.

The native way the button works for redial is hold... I may be confused as to what you meant. I use the Tone+ every day. A single quick push works 99/100 times for me for voice command. That is very odd, works all over for me. I am on Verizon's variant though. Yeah, Voicemate is subpar to Google's search, and Google searches the phone anyhow. Its only useful to make fun of, or I have just yet to find out any good use.

evangelionpunk said:
thanks alex I went ahead and followed those steps.
I also unpaired and repaired the device and now HOLDING the call button down (as opposed to just pressing it) autocalls the last number dialled. hmmmm
Voicemate still doesnt recognise it
Click to expand...
Click to collapse
I just did this and it's amazing solution for me. Maybe it will work for you as well. With press of the call button on your Bluetooth headset you'll start Google Now Voice Search. From it, you can dial, redial, navigate, play song or album, launch app, search the Web,... Even works with screen off.
Voice Mate? Nah... Google Now Voice Search is much better solution.
Look at post #30.
http://forum.xda-developers.com/showthread.php?p=46870972

Thanks! Now I can use Now instead of ****ty voice dialer.

2 simple commands is all I need
alex72 said:
I just did this and it's amazing solution for me. Maybe it will work for you as well. With press of the call button on your Bluetooth headset you'll start Google Now Voice Search. From it, you can dial, redial, navigate, play song or album, launch app, search the Web,... Even works with screen off.
Voice Mate? Nah... Google Now Voice Search is much better solution.
Look at post #30.
http://forum.xda-developers.com/showthread.php?p=46870972
Click to expand...
Click to collapse
Thanks this worked perfectly but the fact is Google Now doesn't work well.
What I would like to see is when I push the Bluetooth button on my headset, it opens the Voice Mate application.
I really just want to be able to say:
1. "Play Music" to start shuffling through my on board music, or Google Play music either way (it's all the same)... Google Now can't do this at all as much as I've tried saying "Listen to <song/band/album name>".
2. "Call so and so" to make phone calls. The system Voice Dialer App works better for this than Google Now.
Google Now may work better in general if I am actively using my phone with my eyes and hands but to me the idea of using voice commands is so that you don't have to look at or touch your phone. My Lg Tone + opened S Voice no problem on my SAMSUNG Galaxy Note II (on older version of Jellybomb... 12.1 I think it was)... Why does the LG Tone + not open Voice Mate by default on the LG G2? I don't get it... this seems like a given for LG.
That's enough ranting lol. I love this phone so far. Anyway if anyone can bump this to a developer or something it would probably be relatively easy for a smart person to fix... I am dumb I just follow the smart people in this world
Thanks yall! I hope we can figure this out. :laugh:

My testing with Voice Mate and Now has reverted me back to stock commands. Just works. None work well enough.

Yea G Now and Voice Mate both don't work that well but for simple commands like "Play Music" and "Call Steve" Voice Mate works fine.

Related

Voice Commands - Make It Even More Awesome?

I've recently been having a play with the Voice Tag function on my Wizard. I can call any of my contacts by voice, and I can perform a plethora of functions on my phone by voice (helped by the added hardware button functions that Pocket+ provides). Now i'm wondering if I can do even MORE by voice, i.e. a spoken password, dialing by saying each number, that kind of thing?
Yeah,
Dump the cheezy Cyberon Voice Dial and get Microsoft Voice Command or Cyberon Voice Commander.
Both allow you to access PDA functions such as launch programs, access calander etc.
Additionally they allow "Dial 444 555-1234"
In my opinion MS Voice Command is better.
I've played with Cyberon Voice Commander because it will read e-mail and text messages but I've found it to be useless. Also Cyberon has too much of a delay from activation to ready for voice input for my tastes.
Oh yeah, neither of these requires "Voice Tags", they work by recgonizing your spoken voice!
Cyberon Voice Commander costs about $20,
MS Voice Command is about $40.
Both can be purchased at Handango.com
Now ... call me silly, but wouldnt it be a slight security risk shouting your password at your device to unlock it ?
Danny-B- said:
Now ... call me silly, but wouldnt it be a slight security risk shouting your password at your device to unlock it ?
Click to expand...
Click to collapse
Maybe that's why none of these products supports it!!
I have given up on MS Voice Command. It works well, as long as you dont use it with Bluetooth.
It dials once or twice, but then stops responding to the Bluetooth command button. The only way I can get it to work is to press the bluetooth button twice to redial the last call, quickly hit the button again to cancel the call, and then, sometimes, the long press will initiate voice command again.
Jumping through hoops like this make the program pretty worthless to me. To dial numbers in the car is all I need if for, and that is where it doesnt work. I will stick with the voice tags.
jimmyhauser said:
I have given up on MS Voice Command. It works well, as long as you dont use it with Bluetooth.
It dials once or twice, but then stops responding to the Bluetooth command button. The only way I can get it to work is to press the bluetooth button twice to redial the last call, quickly hit the button again to cancel the call, and then, sometimes, the long press will initiate voice command again.
Jumping through hoops like this make the program pretty worthless to me. To dial numbers in the car is all I need if for, and that is where it doesnt work. I will stick with the voice tags.
Click to expand...
Click to collapse
That's not VC's issue, it's your BT stack issue. On my K-JAM I press once to activate the BT audiogateway, press again to issue the VC. Works every time.
JNGold said:
That's not VC's issue, it's your BT stack issue. On my K-JAM I press once to activate the BT audiogateway, press again to issue the VC. Works every time.
Click to expand...
Click to collapse
Press once activates the phone over bluetooth (sometimes anyway, sometimes nothing happens at all), pressing again does nothing. Believe me, I have tried EVERYTHING. I was messing with it for two hours doing every combination I could think of. The only thing that works is a double press for redial, end the call right away, then I can activate VC again(sometimes). And the cycle repeats.
On the other hand, built-in voicetag dial works everytime, and I dont have to activate the bluetooth first. One long press prompts for voice dial EVERY TIME.
So I beg to differ, it is an issue with voice command.
JNGold said:
That's not VC's issue, it's your BT stack issue. On my K-JAM I press once to activate the BT audiogateway, press again to issue the VC. Works every time.
Click to expand...
Click to collapse
Same for me. Sometimes the recgonition isn't the same over bluetooth, but I never have to try more than twice. I use my VC for everything.
jimmyhauser said:
JNGold said:
That's not VC's issue, it's your BT stack issue. On my K-JAM I press once to activate the BT audiogateway, press again to issue the VC. Works every time.
Click to expand...
Click to collapse
Press once activates the phone over bluetooth (sometimes anyway, sometimes nothing happens at all), pressing again does nothing. Believe me, I have tried EVERYTHING. I was messing with it for two hours doing every combination I could think of. The only thing that works is a double press for redial, end the call right away, then I can activate VC again(sometimes). And the cycle repeats.
On the other hand, built-in voicetag dial works everytime, and I dont have to activate the bluetooth first. One long press prompts for voice dial EVERY TIME.
So I beg to differ, it is an issue with voice command.
Click to expand...
Click to collapse
So how do you account for it working consistantly fine for some, and others not?
BTW, my VC is loaded on the device, not on a storage card.
VC Usage Vs. VS VC Memory Usage
I've had VC on and off of my 8125 since I bought it in April.
The main problem I have with MSVC is whether its use (or lack there of) validates the amount of memory it uses.
For someone that makes calls primarily off of his recent call list, I find that the usability benefit does not outweigh the memory usage.
Wish there was a way to disable / enable the functionality, as to release that memory for other applications.
JNGold said:
So how do you account for it working consistantly fine for some, and others not?
BTW, my VC is loaded on the device, not on a storage card.
Click to expand...
Click to collapse
Believe me, I am not an expert on this, I am just trying to figure things logically. But I would bet it has to do with the fact that you are probably using a different bluetooth handsfree device than I am. Maybe that was what you were referring to when you said it was a bluetooth issue. Or maybe it is the fact that you have a different model of phone.
What I am saying is that it cant be the bluetooth software on my phone, because the cyberon voice dial works fine over bluetooth, where the MS voice command does not.
And I have voice command on the phone also. All my programs are. I only keep music and videos on the storage card.
And voice command works great when using on the phone itself. I am amazed at how well and how quickly the recognition works. It just doesnt respond well to my Nokia car kit. And maybe that is the problem.
My wife's car has the same bluetooth kit as my car, I am going to try it in her car one of these days to see if I have the same problems there. She has a Nokia 6682, and her bluetooth voice dialling works great.
And also, does VC really use that much memory? If so, I think may take it off the phone. (I use it a little when not in the car) But if it is considerable, then I agree that it is not worth it.
the problem is that without any BT headset i can't get the microsoft voice command to work.
i installed it, dedicate the button. the problem is that when i press it the mic sign appers, i hear the bip and if i say "HELP " it does absolutly nothing.
NOTHING
it just stands there, then another bip comes and the mic sign disappears .
what should i do?
did you turn your mic auto-gain off like the instructions said?
problem solved.
don't know how ...soft reset and bam ! it worked.
the problem is that it hardly recognizes 0 ( zero )
well...i think the old voice dial would do the trick for me...
Keys to success:
1. Load in main memory. (Yes, it's a hog, but to me it's worth it.)
2. Be patient. Sometimes it takes a moment or two to activate.
3. Make sure your volume is not muted. (I admit it, I often walk out of a meeting and get frustrated with why it isn't working... oh, volume is off.)
4. Experiment. Watch the phone while you are playing.
Here are my results with Motorla hs850 .
1. Usually I push once to open the gateway and a second time to activate VC. (Note, I only wear my headset when I need it.)
2. Sometimes the gateway is open for whatever reason and I'll get an immediate bong. So after the first press, I give it a second to see if it will come up.
3. Otherwise, I may get into three presses. One which I think is opening the gateway but is actually opening VC before the bong sounds. A second which I think is activating VC but apparently is closing it. The third press usually then does the trick, but sometimes I'll even have to go to number 4.
So my strategy is:
1. Push button.
2. Wait a slow count for response.
3. Go back to #1 until success is achieved.

Voice Command

Anyone here use VC1.6 with Bluetooth?
Has anyone else noticed that the confirmations don't work?
I've seen threads on other forums about this, but no solution yet over there.
Figured I'd bring it up in case folks here have the answers.
Basically, here's my conversation:
Press BT button
Device: *Beep*
Me: "Call John"
Device: "Call John?"
Me: "Yes"
Device: *Timemout Beep*
Now, the confirmation works when used on the device just fine.
When on the headset, its like it gives up without trying to hear me.
MS Voice Command v 1.6 works almost perfectly on my Sprint Mogul. It has one flaw - when the button you map is first pushed it does not give off the beep, but the small microphone on the top bar shows up. When the little mike shows up, you can say your commands and it works perfectly.
The next time the button is pushed, the beep is heard and the mike shows up.
Also, VC is activated by my Motorola S9 stereo BT headset. If I push the right button on the headset, I hear the beep and can give the command into my headset even if the headset is in my backpack.
The failure to beep on the first button push is a small problem I'm sure can be worked out. For me it is no problem at all. I just push the button and begin speaking.
I own many other HTC products and VC works as well on the Mogul if not better than any of them and I haven't even hacked it yet.
The problem only shows up when dialing a number from the BT headset and the confirmation is played back. It seems there is a problem with the mic after the confirmation is played so you can't reply "yes" or clarify. It works fine for opening programs or if the confirmation is turned off and you are lucky enough for it to hear you correctly
ImCoKeMaN said:
The problem only shows up when dialing a number from the BT headset and the confirmation is played back. It seems there is a problem with the mic after the confirmation is played so you can't reply "yes" or clarify. It works fine for opening programs or if the confirmation is turned off and you are lucky enough for it to hear you correctly
Click to expand...
Click to collapse
Yeah, this makes browsing media impossible!
I used to say "Play music" wait until it asks me what type to sort by "Artist"... wait again "Dream Theater"... and then the music would start.
Now, I can't get past the first prompt because the mic is shut off. Very weird indeed...
Voice Command 1.6
One thing that I've noticed with my S9 and 1.6 (wm6 but had similar issues in wm5) is that VC gets confused by the stereo headset, announcements will generally shut off the headset for a moment and come out of the phone speaker, if I hit the button on the headset, I will get the VC beep in the headset, but it seems to be listening to the mic on the phone, and if I hit the phone's activation button, the beep comes through the phone, but it then seems to be listening to the headset for commands. I've found no reliable way to 'straighten' this out, however, I did notice the other day when I reset my phone and used the 'play' button on the headset to reinitiate the phone/headset connection rather than initiating it automatically when I turned on the headset that it seemed to be functioning normally for the first time in a long time. I've not tried to reproduce that yet, but will try it tonight.
Traumtanzer said:
One thing that I've noticed with my S9 and 1.6 (wm6 but had similar issues in wm5) is that VC gets confused by the stereo headset, announcements will generally shut off the headset for a moment and come out of the phone speaker, if I hit the button on the headset, I will get the VC beep in the headset, but it seems to be listening to the mic on the phone, and if I hit the phone's activation button, the beep comes through the phone, but it then seems to be listening to the headset for commands. I've found no reliable way to 'straighten' this out, however, I did notice the other day when I reset my phone and used the 'play' button on the headset to reinitiate the phone/headset connection rather than initiating it automatically when I turned on the headset that it seemed to be functioning normally for the first time in a long time. I've not tried to reproduce that yet, but will try it tonight.
Click to expand...
Click to collapse
Scratch that, I wasn't able to duplicate this, so seems to be a random occurrence, I know that every once in a while it does seem to work correctly, but that's very rarely.
List of Voice Commands
Has anyone got a list of voice commands, and is there any way to add new commands?
My VC 1.6 bluetooth problem is even more frustrating. It always recognizes my contacts, but the confirmation doesn't work AND I CAN'T DISABLE IT!
I uncheck the confirm box on the VC settings, but it still tries to confirm.
Is there something I'm missing?
Sprint does it again
WM6 has voice command built-in, but Sprint decided to disable it and not make it part of the ROM, so when you install 1.6 over the already there application, is when you lose part of the functionality.
Ha! I found my voice command problem -- I had a duplicate contact.
What voice command said (even after I turned off confirmation) was "Joe Blough at Home 3 found" and then it displayed one of them. When I removed the duplicate and turned off confirmation -- IT WORKED!
Now, if they would just fix the confirmation to work properly...
Ok.....my problem is it will not announce incoming calls, no matter what i do...everything else seems to work fine, but it will not announce incoming calls threw the bluetooth nor speaker, am i missing something???
Bottom line: Voice Command 1.6 is buggy, and needs to be updated to work 100% with WM6. Start complaining to Micro$oft.
TC1 said:
Bottom line: Voice Command 1.6 is buggy, and needs to be updated to work 100% with WM6. Start complaining to Micro$oft.
Click to expand...
Click to collapse
It's not buggy at all, it wasn't made for use on WM6, it's for WM5, we're lucky it works as well as it does.
You can bet MS is already working on a new version, question is when will it be released.
Is there an echo in here? What part of "needs to be updated to work 100% with WM6" didn't you understand?
I was saying it isn't buggy as you said, it works great for the OS it is intended to be used on.
Funny enough, VC works great for me... The only issue I have is sometimes it does not play the first tone when I press the VC button...
Shaska said:
Funny enough, VC works great for me... The only issue I have is sometimes it does not play the first tone when I press the VC button...
Click to expand...
Click to collapse
It works fine if not using bluetooth. (aside from the missing first tone sometimes)
Dishe said:
It works fine if not using bluetooth. (aside from the missing first tone sometimes)
Click to expand...
Click to collapse
And also doesn't always confirm commands. At least from my experience.
primenall said:
It's not buggy at all, it wasn't made for use on WM6, it's for WM5, we're lucky it works as well as it does.
You can bet MS is already working on a new version, question is when will it be released.
Click to expand...
Click to collapse
I have the Alltel 6800 with WM5 and am experiencing the same problems as you WM6 folks.
It seems to be an issue with the Mogul/MSVC combo like you said, also a friend of mine put the WM6 Rom on his 6700 and he says MSVC confirmation works fine.
Maybe a Radio incompatability, I'm just a novice though?

Voice Talk not doing voice dial when screen is locked

Hi guys,
I have been trying to find answers for this problem ever since i bought my Galaxy S2..but no luck so far.
The problem is trying to voice dial someone while the phone is paired with a bluetooth headset and on standby/screen locked mode. In other words i want to be able to voice dial someone when my galaxy is in the pocket instead of having to unlock the screen and go for voice dial and then say command which negates the whole point of having voice dial.
So far when i press the bluetooth's button, the phone goes - "what would you like to do" and then i try saying ''call (person)" but the phone seems to be doing nothing after that..but when the screen is unlocked and i do the same thing, it actually does dial(no point because if i am able to take the phone out and unlock it, i might as well dial it instead of voice). What really hits me is that the bluetooth actually does trigger the voice talk application and the phone requests me to say what i want to do but after that nothing happens.
Can you guys tell me whats going on? This problem is really making me hate this phone because the phone boasts so many ads about voice dialling but it cannot do a simple voice dial which is possible on ancient phones. Cheers
I've been playing with this for the past couple of days and here's what I've learned. It's complicated because there are multiple settings that effect each other. The phone has to be on to use Voice Talk. It can be locked, but has to be on and active. In other words, Voice Talk won't wake the phone up if it was shut off with the on/off button. Also, the app has to be in the foreground for it to listen. If you go to the home screen or launch another app its no longer active and listening.
Also, similar to the OP, my headset reacts strangely when I use its command button. When I push the button and say "phone command," it says "activating your phones inbuilt calling features," and then says "this feature is not supported on the connected phone." But, after that, Voice Talk is still listening but acts wonky. Instead, I set Voice Talk to Listen Over Bluetooth and I don't have to push anything - I just say Hi Galaxy. OP, I bet your headset's experiencing something similar. Try turning on Listen Over Bluetooth and Wake Up Command and then just say Hi Galaxy to start Voice Talk. I bet it works. Don't forget you can also set Motion to on and then just tap the phone twice (even if its locked) to activate Voice Talk. I'm guessing that uses less battery on both the phone and headset then leaving the Wake Up Command on.
Here's my take on each of the settings:
Listen Over Bluetooth
Has to be on for Voice Talk to work via a headset. If not, you can hear the prompts through the headset but Voice Talk is listening through the phone's built in mic.
Auto-Start Listening
I haven't figured this one out. Either off or on the phone seems to behave the same way. The best I can figure is that Voice Talk starts listening immediately the first time its opened instead of having to tap the button to make it start listening.
Wake Up Command
If Listen Over Bluetooth is active, the Wake Up Command has to be on for Voice Talk to hear Hi Galaxy.
Driving Mode
Is really mislabeled. All it does is announce new e-mail (but not read them) and read text messages.
So that's my take. I'd be interested in everyone else's experiences and if they've learned anything different or better.
BarryH_GEG said:
I've been playing with this for the past couple of days and here's what I've learned. It's complicated because there are multiple settings that effect each other. The phone has to be on to use Voice Talk. It can be locked, but has to be on and active. In other words, Voice Talk won't wake the phone up if it was shut off with the on/off button. Also, the app has to be in the foreground for it to listen. If you go to the home screen or launch another app its no longer active and listening.
Also, similar to the OP, my headset reacts strangely when I use its command button. When I push the button and say "phone command," it says "activating your phones inbuilt calling features," and then says "this feature is not supported on the connected phone." But, after that, Voice Talk is still listening but acts wonky. Instead, I set Voice Talk to Listen Over Bluetooth and I don't have to push anything - I just say Hi Galaxy. OP, I bet your headset's experiencing something similar. Try turning on Listen Over Bluetooth and Wake Up Command and then just say Hi Galaxy to start Voice Talk. I bet it works. Don't forget you can also set Motion to on and then just tap the phone twice (even if its locked) to activate Voice Talk. I'm guessing that uses less battery on both the phone and headset then leaving the Wake Up Command on.
Here's my take on each of the settings:
Listen Over Bluetooth
Has to be on for Voice Talk to work via a headset. If not, you can hear the prompts through the headset but Voice Talk is listening through the phone's built in mic.
Auto-Start Listening
I haven't figured this one out. Either off or on the phone seems to behave the same way. The best I can figure is that Voice Talk starts listening immediately the first time its opened instead of having to tap the button to make it start listening.
Wake Up Command
If Listen Over Bluetooth is active, the Wake Up Command has to be on for Voice Talk to hear Hi Galaxy.
Driving Mode
Is really mislabeled. All it does is announce new e-mail (but not read them) and read text messages.
So that's my take. I'd be interested in everyone else's experiences and if they've learned anything different or better.
Click to expand...
Click to collapse
Thanks for this detailed reply. I think at some point I have tried these settings but not sure if they were in the exact matching order. I will give it another go with everything set up to the way you have mentioned and see what I get. I am sure I am very close to actually getting it to work though..fingers crossed ..and yes if anyone else have different combinations of settings or ways they got it to actually work from a locked screen, please share it here. Thanks.
BarryH, I did try those exact settings like you had mentioned but still no luck. On triggering the voice talk with bluetooth headset's button, i can hear voice talk say "what would you like to do?" and does not respond to anything i say. (while screen is off).
I am thinking of installing Vlingo and trying to get that to work this way? Not sure if it would make a difference though.
vijith555 said:
BarryH, I did try those exact settings like you had mentioned but still no luck. On triggering the voice talk with bluetooth headset's button, i can hear voice talk say "what would you like to do?" and does not respond to anything i say. (while screen is off).
I am thinking of installing Vlingo and trying to get that to work this way? Not sure if it would make a difference though.
Click to expand...
Click to collapse
If you do what I suggested you don't have to push the command button. The phone will be listening for the "hi galaxy" command all the time.
Sent from my GT-I9100 using XDA Premium App
I noticed the same thing, when paired with my car, the phone does not respond to pressing the button on my parrot if the phone is locked
I disabled the factory lockscreen and now use widget locker instead, problem has gone away
connectsys said:
I noticed the same thing, when paired with my car, the phone does not respond to pressing the button on my parrot if the phone is locked
I disabled the factory lockscreen and now use widget locker instead, problem has gone away
Click to expand...
Click to collapse
I was thinking of trying this next as I have run out of options..so you say it worked? Then I will get widget locker and see how I go. So let me get this straight - i get widget locker and use the lock screen that comes with that or using widget locker i disable the stock lock? Or I should disable the stock lock from settings and then use widget locker? Cheers
yea disable stock lock in settings and then use widget locker only for lockscreen
connectsys said:
yea disable stock lock in settings and then use widget locker only for lockscreen
Click to expand...
Click to collapse
Tried this last night and unfortunately its still doing the same thing. On holding the bluetooth headset's button while the phone's screen is off I can hear the phone go "what would you like to do" and right after this i say commands like "call (someone)" but nothing happens. When the phone's screen is on, it actually works when i do the same thing which just surprises me to as why. Also when the screen is off and voice talk not on the front screen the wake up command doesnt work. So again a person has to leave his screen on (without letting the phone go to standby) and leave the voice talk app running for voice dial to work.
And to make things worse the double tapping with motion turned on settings doesnt bring up voice talk when the screen is off..again putting me in the same situation. The only way voice talk work on this phone is when the screen is on so far which isnt really practical in situations you would want to use voice commands..i hope samsung or google brings a better solution to this issue because this phone's got so much boasting about being able to voice command but isnt able to perform what an iphone or old nokia do
If you've got Tasker, you might be able to set something up... I noticed the same problem last night, and yeah, it's totally counter-intuitive...
I'll let y'all know how I go...
BTW - also noticed that while it may listen through my car bluetooth, it certainly doesn't play through it, and it's next to impossible to hear the mousey voice in a moving vehicle muffled in the depths of my pocket anyway...
Stupid half-baked software!
k1sr said:
If you've got Tasker, you might be able to set something up... I noticed the same problem last night, and yeah, it's totally counter-intuitive...
I'll let y'all know how I go...
BTW - also noticed that while it may listen through my car bluetooth, it certainly doesn't play through it, and it's next to impossible to hear the mousey voice in a moving vehicle muffled in the depths of my pocket anyway...
Stupid half-baked software!
Click to expand...
Click to collapse
I cant agree more about it being counter-intuitive..and yes its not nice the voice prompts coming through the phone but i remember once somehow the voice prompts did come through the bluetooth headset i dont know how. Like you said something is not letting it operate properly, like blocking it. I havent used this Tasker but have used task manager like apps in the past. So you believe you could try to figure out a fix for this..i appreciate your efforts because I am just lost at the moment. Let me know how you go mate. And I will let you know if I get around this issue too. Thanks mate
k1sr said:
If you've got Tasker, you might be able to set something up... I noticed the same problem last night, and yeah, it's totally counter-intuitive...
I'll let y'all know how I go...
BTW - also noticed that while it may listen through my car bluetooth, it certainly doesn't play through it, and it's next to impossible to hear the mousey voice in a moving vehicle muffled in the depths of my pocket anyway...
Stupid half-baked software!
Click to expand...
Click to collapse
Ok i found a way to get this voice dialling to work when the screen is off but not using a bluetooth headset, instead the wired headset for the time being.
So I can trigger voice dial when the phone is in the pocket and voice prompt comes to the headset, i say command and it works . I dont mind it working for the wired headset as that is good enough for the time being while driving. If you need to know how i got this done just give me a buzz. There are two pieces of software that I got to set this up. Cheers.
I just deleted built in vlingo crap and took generic Google voice dialer apk from my nexus s. Plus side you don't have to be connected to net to dial contacts and I can hear reply in headset as well.
Sent from my GT-I9100

Launch App with button bluetooth headset (G2 d802)

With samsung (s3, s4, s5) when I press the bluetooth headset button, it starts S-voice and voice commands work.
On g2, I press the button and nothing happens, why?
What can I do?
I tried to install several apps, without success!
Help me
thx in advance
ilrisolutore said:
With samsung (s3, s4, s5) when I press the bluetooth headset button, it starts S-voice and voice commands work.
On g2, I press the button and nothing happens, why?
What can I do?
I tried to install several apps, without success!
Help me
thx in advance
Click to expand...
Click to collapse
With mine it starts google search.
Did you configure the voice commands?
No! What should I do?
The problem is that when I press the headset button, nothing happens! You only hear a beep
But You work? Ex. With bluetooth launch?
raduzione
I activated google and now the "bluetooth headsets" but will not start anything!
Nothing?
seems inconsistent to me.
with the screen on, I get the voice dialer thing (not google voice search, the old school voice dialer)
with screen off, i get nothing. I tried bluetooth launch from the play store and didn't get it working there either.
I also tried this on my Nexus 5 with very similar results....although, I was able to launch google voice search for the first couple times, then it just stopped working.
FWIW, using an LG Tone+ headset and searching for ideas as well.
would love voice search to pop up with the screen off.
Hi,
I have a similar problem with my car bluetooth "talk to dial" button.
When I pair my G2, this button is disabled; when pairing other phones (Nexus 4, Galaxy Nexus) the button is active and starts google now.
I think this is related with the HFP protocol. Any ideas on how to fix this?
turdbogls said:
seems inconsistent to me.
with the screen on, I get the voice dialer thing (not google voice search, the old school voice dialer)
with screen off, i get nothing. I tried bluetooth launch from the play store and didn't get it working there either.
I also tried this on my Nexus 5 with very similar results....although, I was able to launch google voice search for the first couple times, then it just stopped working.
FWIW, using an LG Tone+ headset and searching for ideas as well.
would love voice search to pop up with the screen off.
Click to expand...
Click to collapse
Works on display on? What ROM do you have?
I turned on screen does not work, nothing happens!
ilrisolutore said:
Works on display on? What ROM do you have?
I turned on screen does not work, nothing happens!
Click to expand...
Click to collapse
CM11.
with display off, It triggers voice dialer.
with screen on, it triggers google voice search.
I'm trying to work with tasker to get this thing working...but I'm not a tasker power user by any means, so I dont have high hopes

[Q] Bluetooth / Google now

Hey,
I'm running the 9505 s4 4.4.2.
For the first time since the nexus one I think I've run into an issue no android phone can get around.
I ride a motorcycle and picked up the Sena 20s Bluetooth headset.
This is my first Bluetooth headset and something I've waited over a year for.
The issue is the dedicated phone button to access your device through voice.
By default this button launches voice dialing on android instead of Google now.
With iPhone it launches siri.
I have tried to reassign the button to Google now but this only works if the device is not locked.
Is there any way around this?
Is there any device that will allow Google now to launch?
Any word if android 4.5 / 5.0 will fix this?
Perhaps a ROM that enables this?
Any advice is appreciated as I currently stand it is looking like iPhone is the only option.
Another option may be the motto x with active listening.
I've heard Google may make this available to all devices, but I was under the impression that this "always listening" is completely Dependant on hardware?
I have the same problem!
I have this exact same problem. Even when the phone is unlocked, google now is a bit spotty in loading when hitting the phone button.
Google did just release an update for Google Now that allows you to access google now from any screen, even the lock screen. That being said, the phone button on the Sena 20s STILL loads the phone dialer. The phone dialer is honestly not good and google now seems to be better to use for dialing people anyway. I wonder if we can submit a request to Sena to have this feature added. It's probably just the button calling up voice dialing instead of google now.
Try submitting a feature enhancement request, I might do the same.

Categories

Resources