[ROM][WIP]CM10 for Karbonn S5, Cherry Mobile skyfire 2.0, Blu studio 5.0s,5.3s - Blu Studio 5

hi all presenting to you CyanogenMod 10 for your beloved phone.
Compatible Phones
Karbonn S5 (Tested by myself)
K-Touch E80
Blu Studio 5.0s
Blu Studio 5.3s
Cherry Mobile Skyfire 2.0(Tested)
Archos Platinum 50
DISCLAIMER
*This is a Beta v1 release with bugs
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
instructions:
Reboot to Recovery( supports CWM and TWRP)
wipe cache
wipe dalvik cache
factory reset
choose the zip and flash
WORKING
AOSP/CM10
RIL (full – GSM/SMS/EDGE/3G/SIGNAL
etc)
Audio
Microphone
Small speaker
Sensors (strange issue with proximity)
Full 2D/3D acceleration
Touchscreen
SD card
Bluetooth
Browser
Mass storage
Live wallpapers
GPS
Headphones
Dual SIM stand by
NOT WORKING
WiFi
Wifi hotspot
camera
internal sd card might get unmounted
any more bugs report here
Change log
Beta v1
initial release
fixed Mic
fixed screen washout(Thanks to Sahaj Agarwal)
fixed Bluetooth
Credits
Sahaj Agarwal
592zn.com (used their work for K-touch Kiss U90 as base)
Karbonn S5 group
CyanogenMod
Android
Google
xda
DOWNLOADS
Rom
https://db.tt/uGzk2CUt
Gapps slim version
http://www.mediafire.com/?sxt2rwp5ra5ogsi
Camera Fix(credits Sahaj360)
http://forum.xda-developers.com/showthread.php?p=47347887#post47347887
APPEAL
To all devs around this group and community plz try to fix the bugs as I am always busy don't know when the bugs will b fixed

reserved

reserved for future use

cool..

Is anyone still working on this?

bugs!
camera FC's when I switch to front cam and stops at working permanently and WiFi is also not working.
kindly fix these bugs

I believe zeyaan quit developing for this phone because he bought a new one so I doubt we will see a any changes unless someone else picks this up

Can I have the device tree of this Cyanogenmod build? I could contribute

tuxboy said:
Can I have the device tree of this Cyanogenmod build? I could contribute
Click to expand...
Click to collapse
we don't have source code yet, the ROM was built by devs on 592zn.com...we just have the ROM

We'd be happy if you could just fix the above mentioned bugs

Hi guys, I have a old v5 miui but I prefer cm anyone knows if there's a newer version of cm, preferentially with bug fixes?
Sent from my SkyFire 2 using Tapatalk

Malcom PT said:
Hi guys, I have a old v5 miui but I prefer cm anyone knows if there's a newer version of cm, preferentially with bug fixes?
Sent from my SkyFire 2 using Tapatalk
Click to expand...
Click to collapse
cam has been fixed in cm10 but WiFi hotspot won't be fixed... you can try cm10.1 as well but it also has WiFi hotspot bug

psychopac said:
cam has been fixed in cm10 but WiFi hotspot won't be fixed... you can try cm10.1 as well but it also has WiFi hotspot bug
Click to expand...
Click to collapse
OK, are the links in the start of the thread updated?
Sent from my SkyFire 2 using Tapatalk

what is difference in CM10 and CM10.1

[4.2.2] Cyanogen 10.1 for
Well i got a 10.1 CyanogenMod Rom with android 4.2 for Karbonn S5 aka K-Touch S2, Cherry Mobile Skyfire 2.0, Blu studio 5.0s,5.3s, Qilive 5.3 and so on...
here's the link http://goo.gl/p0wnaM
everything is working aside from the Bluetooth and the wifi tether, but for the wifi tether there is a fix:
http://forum.xda-developers.com/showthread.php?t=2479395
this rom was over @ http://techbuzzztoday.wordpress.com/ there are more roms there including the 10.0 that has the Bluetooth working
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Download link is down, any mirror?

Related

[ROM] 4.4.2 | MoKee Opensource | CM & AOSP | HALO][Dirty-Build]

Welcome to MokeeOS Opensource Project​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About MoKee OpenSource:
MoKee OpenSource is based on the Google AOSP and CyanogeMod project. We update our source code frequently to keep up with the latest development, and not forgetting to merge in special features of our own at the same time.
The Mfunz Forums launched this project on the 12th of December 2012, and is committed to make this ROM better and better.
Since this project is open source, anyone interested can participate in the development. Newcomers are always welcomed!
Official website: http://www.mfunz.com​
Forum: http://bbs.mfunz.com
Guide: http://bbs.mfunz.com/thread-653126-1-1.html
Statistics: http://stats.mfunz.com
Review: http://review.mfunz.com
Bug Tracker: http://issues.mfunz.com/
Bug Tracker Mobi: http://issues.mfunz.com/mobi
Source: https://github.com/MoKee
Features​
Based on CyanogenMod 11
CM Kernel
Unsecure boot.img (ro.secure=0)
Deodexed
Root
Busybox
HALO
Multi Windows / SplitView
Immersive Mod
Removed chinese apps
Cleaned system part
Change density to 460
Amazing transitions/animations
Screen Recorder
AppOps
Ad-Blocking
Themes because it's CM based
Mokee apps
Mokee improvements / changes
init.d support
nano support
Governors
I/O Schedulers
A lot of more to come
Working​
Everything
Bugs​
Theme crash UI (Mokee bug, soving that..)
Guide: fix a themehttp://forum.xda-developers.com/showthread.php?t=2577469
Video recording is crappy
Changelog​
FIRST DIRTY POOOOOOORT
Downloads​
MokeeOs for Samsung Galaxy S4 Active(in't) (jactiveltexx)
https://drive.google.com/file/d/0ByEZDplbxwxJT0pQQnFNMVRWODg/edit?usp=sharing
Gapps:
http://wiki.cyanogenmod.org/w/Gapps
http://www.androidfilehost.com/?a=show&w=files&flid=7993
http://d-h.st/users/dhacker29?fld_id=27426
Installation​
Download zip from Downloads
Go to Recovery (CWM / TWRP)
Backup your ROM with Nandroid Backup
Wipe/Factory Reset
Wipe also Dalvik/Cache
Flash Gapps
Reboot and enjoy !
Tips​
You can change the langage in settings if the rom is in chineze
Credits and thanks​
davvis
Galaxy User
CyanogenMod
Google for AOSP Sources and kernel and blobs
Team of MoKeeOS
BSDgeek_Jake for Add-Blocking
THIS ISN'T MY WORK I'VE JUST PORTED THIS OVER FROM GALAXY USERS+davvis's PORT
Screenshots​
not a single body wants to say something :crying::crying:
mythi said:
not a single body wants to say something :crying::crying:
Click to expand...
Click to collapse
Hi
Good work
We will not give up on this case :good:
monopol38 said:
Hi
Good work
We will not give up on this case :good:
Click to expand...
Click to collapse
u facing any bugs ?
Hi Mythi,
First I would like to thank you for creating all these ROMs for this device which turned out to be badly supported after I bought it. I somehow also got hold of an LG G2 and that's the device I'm currently using. It has only one big downside... It doesn't support an SD-card.
I flashed the AOSB build you made and I'm using it as a second device (as an iPod listening music).
I would like to update that build, but nothing is happening there.
I could flash this build, but will the same happen?
Was there a particular reason to stop that AOSB build?
Cheers
frater said:
Hi Mythi,
First I would like to thank you for creating all these ROMs for this device which turned out to be badly supported after I bought it. I somehow also got hold of an LG G2 and that's the device I'm currently using. It has only one big downside... It doesn't support an SD-card.
I flashed the AOSB build you made and I'm using it as a second device (as an iPod listening music).
I would like to update that build, but nothing is happening there.
I could flash this build, but will the same happen?
Was there a particular reason to stop that AOSB build?
Cheers
Click to expand...
Click to collapse
Aosb didnt like me to port there rom so yeah thats the reason ;(
Wow.. that's a strange attitude in open source land....
Did they ever gave you a reason why?
Cheers
ROM still working
- I can not install gaps or I do something wrong (installed but not exist, I tried minimal and lpmr1-20150503)
- Opera is Chinese and is part of the application, example something for games
I removed and I installed European Opera
I can not find shop for Samsung apps in internet.
+ I tested OsmAnd app, working on this rom. (wif-fi , gps working)
I installed this. (previous one was stock 4.2.2). Now my touchscreen doesn't work. It only works for 1 second after I turn off/on the screen.
Anyone faced this problem before or has any idea of what should I do now? Or what should I flash?
(tried factory reset/wipe cache etc several times).
Good but outdated...
Hi!
I really love your works like spike rom in the past. It was fast a reliable. But making this kind of outdated rom is pointless. Don't misunderstood. I'm very happy that someone is still working on new roms to our beloved S4A. But instead if this can you please continue the official CM 12.1 that spegelius had started? As I know he sold his device and that's why he cannot complete his CM12.1 work. If You got in contact with spegelius, ask about the official CM source code of the S4A and maybe complete his official CM 12.1 rom, I think the S4A community would make You a king.
Sorry for my writhing style, English is not my native language. I did not want to offend You, just hope there is a future where this phone get a complete and 'stable' CM Snapshot Release.
Thank You for reading my post.

[ROM] [Unofficial] [STABLE] [10.04.2016] [CyanogenMod 12.1]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1(LP), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it!
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Unofficial build of CyanogenMod 12.1 (Android 5.1.1) for the P7000​
Source code of CM12.1 for Elephone P7000:
https://github.com/Deepflex/android_device_elephone_p7000
https://github.com/Deepflex/android_vendor_elephone_p7000
Changelog 10.04.2016:
Fixed. Mobile data working on all sim (1- LTE 2- Edge)
Fixed. Home button
System optimisation
Added libs for FP (FP not added)
Errors in log fix's
Videorecord and play fix
Memory fix
Vendor update
Bugs:
No
About CM12.1 for Elephone P7000:
+
0. Right memory work
1. Mobile data working on all sim (1- LTE 2- Edge)
2. Best camera. No pink, hq photos, libs from 5.1
3. Very good GPS
4. USSD Work
5. When you listen music in headphones, sound only in headphones
6. Sound record work
7. Sim cards fixed
8. Very low brightness fixed
9. Best speed of work
10. Wi-Fi hotspot work
11. Latest security update
12. Adaptation for hardware
13. Better connection
14. Sound libs from 5.1
15. Better work of Bluetooth
16. Fixed black screen problems when you call or answer
17. Selinux
18. Battery optimisation
And etc…
-
Fingerpring will be added soon
Led will be added soon
Installation:
Flash via any custom recovery, make wipes, flash zip, flash gapps, reboot
Download Gapps:
Arm64, 5.1, Nano
http://opengapps.org/
Download area:​10.04.2016 build:
https://mega.co.nz/#!Fh40zAYT!53uRmk7grnXJV5nCY5FI6ybZxGIRRDrgD8yAVGnsegA
Fix's area:​

			
				
Thank you for your great work with the p7000
Congratulation
Hi Deepflex,
Nice to see you here with your Awesome work :good:
Many Thanks for all your ROMs not just this one. :highfive:
BTW: Just for info the Infocus M560-M808 mt6753 is a pretty nice 5.1.1 ROM with dual 4g and apps to sd etc etc just no 5ghz wifi for some silly reason.
It would make a good port candidate for some devices.
Download Link:
Standard set_metadata type update.zip http://dl.infocusphone.com/update/ZM1/ZM1-518J-0-00WW-A03-update.zip
How to root it with this rom???
Godwarrior1 said:
How to root it with this rom???
Click to expand...
Click to collapse
Go to the developers options, you will see the root option there
Sorry to say this, but I found a bug consisting in when opening the torch app, only lights for 1 or 2 seconds and then turn off automatically. I tried using another flash light from PLAY STORE without any success. Any ideas????
hi, anyone experiencing random reboots?
Wierd thing...
First, thank you very much for your work on this ROM; I'd held out on installing CM until the bugs had all been fixed, which you now have.
Anyway, an observation: the SIM slots have been switched.
I had the factory ROM, and I'd inserted my (single) SIM card into slot 2, since the card locates better in that slot. I had LTE working fine. After installing this CM version, I found that, in order to get 4G (LTE) I had to move my SIM card to the other slot (as you say in the text). I'd always assumed that there were hardware differences between the slots; clearly not.
Second thing...
for the torch dude: I've got an app called Torch by Colin McDonough - I don't know if it acts differently to other torch apps, but as you say, the light goes off after a couple of seconds. If, however, you tap the screen again, it comes on and stays on as normal.
Deepflex said:
Fingerpring will be added soon
Led will be added soon
Click to expand...
Click to collapse
Hi, any luck with these 2 issues
Hi thanks for your great work on this phone.
Any clue with the fingerprint scanner ?
Hi, your build on MEGA is NOT available anymore.
Could you re-upload it ?
Have a good day
Edit : I could download it from the office. From my home's browser must come the issue.
Nevermind. Keep up with the great work !
message to delete
esmund said:
hi, anyone experiencing random reboots?
Click to expand...
Click to collapse
I also have reboots. I'd say 4 or 5 times in two days of use.
Any update on P7000 ? P6000 got CM13 with couple bugs but very smooth. I think its from K3 note CM13. Any chance for P7000 ?
What about fingerprint and led?
Are there CM13.0 or CM14.1 for P7000?
Inviato dal mio SM-G920F utilizzando Tapatalk

[ROM][Nougat 7.1] SlimRom [KIPPER]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official Google Plus community:-
Click me
Code:
/*
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Slim is a custom android operating system.
Our main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems. The entire team work together to bring you this tailor-made beauty straight from AOSP source code.
All of the sources can be publicly viewed through GitHub. You can stop by the public Gerrit to submit patches of any type or help translate Slim to your language through our Crowdin project.
Installation:
Copy the ROM and Gapps in SD card.
Go to your recovery - Wipe Data, Cache and Dalvik Cache.
Install ROM and Gapps zip.
Reboot - 1st boot takes around 3-4 minutes.
Enjoy
Downloads:
ROM Repo -View
Gapps - Gapps
Links:
SlimRoms Team
Main thread on 4pda - http://4pda.ru/forum/index.php?s=&showtopic=711205&view=findpost&p=55300654
Amazing, I assume this needs a wipe from Android 6?
ShiftyBloke said:
Amazing, I assume this needs a wipe from Android 6?
Click to expand...
Click to collapse
Yep, before install you need full wipe. And be aware, rom is very clean, and dont have some apps like a sms and other.
Awesome work!
Awesome early version of ROM thanks.
Mostly working, some quirks with changing visual settings that require a restart.
Seems fairly stable.
:good:
To get root had to use TWRP rather than Cyanogenmod recovery to install SuperSu.
Doesn't to be a developer option to enable built into the rom yet.
Again great stuff, the work is much appreciated.
Installed it on my sons phone last night and just got told that GPS is not working correctly. What can I provide to help fix it? In another thread you asked for a logcat. Can you please provide details on how to do that?
Also, is it possible to add stuff from CyanogenMod to this? He wanted the music app so I pulled it from another CM14 ROM but it does not work. And it it possible to get more settings such as PIN scrambling?
TechNoobie said:
Installed it on my sons phone last night and just got told that GPS is not working correctly. What can I provide to help fix it? In another thread you asked for a logcat. Can you please provide details on how to do that?
Also, is it possible to add stuff from CyanogenMod to this? He wanted the music app so I pulled it from another CM14 ROM but it does not work. And it it possible to get more settings such as PIN scrambling?
Click to expand...
Click to collapse
All roms based on AOSP 7.x is a beta-version and in future i'll fix some problems.
No GPS
Here the same, no GPS.
Back to CM13
Give answer when gps works.
Without GPS useless for me.
CM14.1
@Leon der Profi If you are looking for an good and stable ROM based on Nougat then I highly recommend this CyanogenMod 14.1 build - I cannot fault it so far.
CM14.1
@TechNoobie
Where did you find the ROM?
I've been looking for longer.
Is there a page where the people speak about the ROM ?
Greeting Michael
@Leon der Profi see @GriefNorth's first post above for main thread on 4pda - warning it is all in Russian.
does these roms support voLTE
IMS is included in latest CM based builds
Edit: Never mind. I seem to have found the build issue and fixed it. org.cyanogenmod.hardware.utils -> org.cyanogenmod.internal.utils,,,
Anything new with this yet?

[ROM] [AOSP] [7.1.1] LiquidDeathOS - SM-T700

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
About LD
Years after the death of LiquidSmooth, Sean Hoyt (the LiquidSmooth lead dev) has returned to the ROM game with the Exynos5420 team to bring greatness to our beloved exynos5420 tablets and note 3 out of the ashes of the fallen LiquidSmooth ROM. LiquidDeathOS is super optimized for the exynos5420.
In fact right now it is so optimized that it won't even boot on non-exynos devices
LD is AOSP based and is only for Exynos devices
(it's even more optimized than cm)
Feature List:
OMS/substratum theme engine
Advanced Reboot
Network Traffic Settings
Clock Settings
Quick Pulldown
Smart Pulldown
Hardware/Software key control
Lockscreen Control
More to come!!
What works:
Display/Brightness
Touchscreen
Audio
Wifi
Buttons/Lights
SDCard
USB Storage
Bluetooth
IR Blaster
Camera
OMS/substratum theme engine
Microphone
What doesn't work:
Fingerprint is disabled
Home button wake
DU wallpaper leftover
Not in the list? Report below
How to install
1. Download ROM and Gapps and transfer to device
2. Boot into recovery (TWRP recommended)
3. Wipe the system, cache, data, and dalvik cache
4. Install ROM
5. Install Gapps
6. Install Root if you want
7. Reboot to system
Downloads
klimtwifi Builds
Contributors
@deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin @javelinanddart@tincho5588 @ShevT
Device Maintainers
Deadman96385
Source code
Device Repos
Rom Source
XDA:DevDB Information
[ROM] [AOSP] [7.1.1] LiquidDeathOS - SM-T700, ROM for the Samsung Galaxy Tab S
Contributors
deadman96385
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Created 2017-02-11
Last Updated 2017-02-10​
Reserved
Reserved
Hello @deadman96385 Thanks for the new thread, now i can ask stuff in the correct thread.
So grateful you will maintain our T700
Thanks for this!
Sent from my SM-N920P using Tapatalk
So awesome to see LiquidDeath for our T700
Thanks @deadman96385
Downloading now
Sent from my SM-T700 using Tapatalk
Does anyone use magisk on this is it good for a ROM like this or should I stick with just supersu
Thanks for the ROM. Here's a few issues I've noticed
- button lights turn on after a reboot, toggle on/off again to turn off
- auto rotate has stopped working for me
- no sounds installed for ringtone/alarm/notification to select
- search bar that is installed by default does nothing
- YouTube videos skip/stutter
Substratum force closes after ticking a theme
Thanks for your work on this rom!
I also wanted to report a problem with YouTube videos.
It freezes or stutters and skips when playing 1080p videos.
It also seems to have problems playing 720p videos but it isn't as bad as 1080p.
Is it faster than aosp marshmallow?
Anyone installed successful xposed and if yes, which file? I know xposed is not supported.
Thanks,
sosimple said:
Is it faster than aosp marshmallow?
Anyone installed successful xposed and if yes, which file? I know xposed is not supported.
Thanks,
Click to expand...
Click to collapse
Xposed is not available for Nougat ROMs yet.
koimr said:
Xposed is not available for Nougat ROMs yet.
Click to expand...
Click to collapse
Sadly, I would love to have gravity box on this ROM.
Sent from my SM-T700 using Tapatalk
Should I wait for the Official Lineage that is supposed to be out soon?
Thanks deadman, really smooth Rom. Will the Start button get fixed?
Hello everyone,
please, is this for T705 too?
Thanks a lot.
Odesláno z mého SM-N9005 pomocí Tapatalk
Wow, this is great... Very fast, camera works, awesome
Sent from my HTC 10 using XDA-Developers Legacy app
Anyone tried both the latest LineageOS and LDOS? Which seems to be the smoothest more polished ROM of the two?
SkOrPn said:
Anyone tried both the latest LineageOS and LDOS? Which seems to be the smoothest more polished ROM of the two?
Click to expand...
Click to collapse
I just treid Lineage this weekend but I have not tried LDOS yet. The Lineage ROM is quick and smooth i just found that the battery life watching movies isn't great on my T700. got about 4 hours watching VLC with H264 MPEG 4.
Next weekend all give this a try but I am curious what the experience is here with battery life and video playback.
Based upon the recommendation of my buddy @kaodd, I'm thinking of giving this a try. Anyone have advice about dirty flashing over from AOKP?

[ROM][UNOFFICIAL][9.0.0_r16][vince] NitrogenOS Pie [24-11-2018]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
Android OS version: 9.0
For devices: vince
Authors build: rama982
Source code: https://github.com/nitrogen-project
Developers: xyyx
Thanks: xtrymind and other devs who i cherry-picked from
Gapps: BitGapps, OpenGapps
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS
Volte
IR Blaster
EBBG Panel and Touchscreen
Novatek Panel and Touchscreen
INSTRUCTIONS
Use latest OrangeFox recovery
Go to your recovery
Factory Reset
Install ROM And Gapps zip.
Reboot.
DOWNLOADS
ROM : SourceForge
NitrogenOS tree known issue:
- Video Recording
Source Code :
Device Tree:
android_device_xiaomi_vince
android_device_xiaomi_msm8953-common
Vendor Tree
proprietary_vendor_xiaomi
XDA:DevDB Information
NitrogenOS Pie, ROM for the Xiaomi Redmi Note 5 / 5 Plus
Contributors
rama982
Source Code: https://github.com/rama982/kernel_xiaomi_msm8953
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
Version Information
Status: Beta
Beta Release Date: 2018-11-04
Created 2018-11-04
Last Updated 2018-11-23
reserved
pole
reserved
luistro said:
pole
Click to expand...
Click to collapse
why yo do this, ah nvm.
Thanks alot for ur contributions for Vince
what does it mean, battery stats issue ?
Psyberdelixx said:
what does it mean, battery stats issue ?
Click to expand...
Click to collapse
app usage battery stats
Is Nitrogen is a rom on One plus ?
Yong_Uno said:
Is Nitrogen is a rom on One plus ?
Click to expand...
Click to collapse
Thats oxygen os ._.
just became my fav pie rom for now... thx a lot dev.
SS Please
F2FS Supported?
Does video recording work on 3rd party camera?
LETS TAKE A LOOK to our new friend.
Its a very smooth, very fast and responding rom.
Black theme and Clock position I would like to be a way to change, no big deal though.
Rom is performing better than long time present roms out there.
This is a job very good done.
Thank you @rama982
I flashed the rom using redfox 8.3 new recovery, with Nano Gapps and Magisk 17.1.
NO crash, reboot, or anything similar. Rom has been installed and run as a charm.
Sim card , like everywhere these days, still asking for confirmation on boot. One tick action, so NP
Crusiefire said:
Does video recording work on 3rd party camera?
Click to expand...
Click to collapse
Video recording working on 720p on stock camera
FP unlock after reboot option is available?
akza007 said:
F2FS Supported?
Click to expand...
Click to collapse
F2fs support on kernel, if the kernel supported then you can use f2fs.
Charging with normal(no fast charge) charger and 4G data
rom is good but im facing few problems
every reboot sim card needs to be selected for data
sdcard with ext4 format shows "issue with Sandisk SDCard" "Tap to fix" error
mac address for wifi gets changed automatically.

Categories

Resources