Hello, i have just installed the ECHOE ROM in my note 3, i am from Italy.
when I restarted the phone came out the message : CUSTOM BINARY BLOCKED BY RACTIVATION LOCK and doesn't start.
Help me please.
mejam said:
Hello, i have just installed the ECHOE ROM in my note 3, i am from Italy.
when I restarted the phone came out the message : CUSTOM BINARY BLOCKED BY RACTIVATION LOCK and doesn't start.
Help me please.
Click to expand...
Click to collapse
Me too have the same issue but mine was XNote by soloilmeglio. When i restarted it tells me the same message and underneath in red "Secure Fail: Kernal". Please help
Some iesqusb
njan_ivide said:
Me too have the same issue but mine was XNote by soloilmeglio. When i restarted it tells me the same message and underneath in red "Secure Fail: Kernal". Please help
Click to expand...
Click to collapse
can anyone help us please???
Bumping it up!!
Solution found and now working like a charm.... I was about to take it in for warranty tomorrow but KNOX would have created an issue once i am there.
Solution.
1. download KIES 3 (for note 3)
2. Click tools>Firmware upgrade and initialization
3. Put phone into download mode (press Volume down+Home Button+Power Button and then volume up)
4. Connect your phone (it is OK if it is not recognized by KIES, just keep it connected)
5. Now do as it says by typing in your Phone model number (check the battery compartment).
6. Type in the S/N.
7. Let it do its business and download the firmware.
8. Once firmware is downloaded, It will start communicating with the phone.
9. You can see a blue progress line on the screen under the android guy.
10. Let it finish and restart.
DONE!!
Click Thanks if it helped!!
njan_ivide said:
Solution found and now working like a charm.... I was about to take it in for warranty tomorrow but KNOX would have created an issue once i am there.
Solution.
1. download KIES 3 (for note 3)
2. Click tools>Firmware upgrade and initialization
3. Put phone into download mode (press Volume down+Home Button+Power Button and then volume up)
4. Connect your phone (it is OK if it is not recognized by KIES, just keep it connected)
5. Now do as it says by typing in your Phone model number (check the battery compartment).
6. Type in the S/N.
7. Let it do its business and download the firmware.
8. Once firmware is downloaded, It will start communicating with the phone.
9. You can see a blue progress line on the screen under the android guy.
10. Let it finish and restart.
DONE!!
Click Thanks if it helped!!
Click to expand...
Click to collapse
What is "battery compartment"? and my phone is N9005, what should i type in Model name?
sorry for my bad english.
please help me !!!
"battery compartment" - removebatery and You'll find Serial Number which is needed for Kies3
njan_ivide said:
Solution found and now working like a charm.... I was about to take it in for warranty tomorrow but KNOX would have created an issue once i am there.
Solution.
1. download KIES 3 (for note 3)
2. Click tools>Firmware upgrade and initialization
3. Put phone into download mode (press Volume down+Home Button+Power Button and then volume up)
4. Connect your phone (it is OK if it is not recognized by KIES, just keep it connected)
5. Now do as it says by typing in your Phone model number (check the battery compartment).
6. Type in the S/N.
7. Let it do its business and download the firmware.
8. Once firmware is downloaded, It will start communicating with the phone.
9. You can see a blue progress line on the screen under the android guy.
10. Let it finish and restart.
DONE!!
Click Thanks if it helped!!
Click to expand...
Click to collapse
After it starts the upgrade part, it says my phone has been disconnected, but yet it's still plugged in. Did anyone find a way around that?
njan_ivide said:
Solution found and now working like a charm.... I was about to take it in for warranty tomorrow but KNOX would have created an issue once i am there.
Solution.
1. download KIES 3 (for note 3)
2. Click tools>Firmware upgrade and initialization
3. Put phone into download mode (press Volume down+Home Button+Power Button and then volume up)
4. Connect your phone (it is OK if it is not recognized by KIES, just keep it connected)
5. Now do as it says by typing in your Phone model number (check the battery compartment).
6. Type in the S/N.
7. Let it do its business and download the firmware.
8. Once firmware is downloaded, It will start communicating with the phone.
9. You can see a blue progress line on the screen under the android guy.
10. Let it finish and restart.
DONE!!
Click Thanks if it helped!!
Click to expand...
Click to collapse
Will Try soon, thanks
Sent from my CruelB Note 3 SM-N9005 Snapdragon 800 using Tapatalk
SM-N9005 does not support
njan_ivide said:
Solution found and now working like a charm.... I was about to take it in for warranty tomorrow but KNOX would have created an issue once i am there.
Solution.
1. download KIES 3 (for note 3)
2. Click tools>Firmware upgrade and initialization
3. Put phone into download mode (press Volume down+Home Button+Power Button and then volume up)
4. Connect your phone (it is OK if it is not recognized by KIES, just keep it connected)
5. Now do as it says by typing in your Phone model number (check the battery compartment).
6. Type in the S/N.
7. Let it do its business and download the firmware.
8. Once firmware is downloaded, It will start communicating with the phone.
9. You can see a blue progress line on the screen under the android guy.
10. Let it finish and restart.
DONE!!
Click Thanks if it helped!!
Click to expand...
Click to collapse
I started this process but when I enter the serial number, Kies tells me that the "SM-N9005 does not support initialization"... Please help...I cannot use the machine
This is precisely why you are to make sure the reactivation lock is disabled, BEFORE trying to flash anything or modify the system.
All good saying they should have but we all know half of xda flash before reading these days.
Sent from my SM-N9005 using Tapatalk
dr.m0x said:
All good saying they should have but we all know half of xda flash before reading these days.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Sometimes it's better that way... If they're spoon fed all the time then it means nothing, an expensive lesson generally sticks...
Only advice would be to try and flash stock rom with PC ODIN, hope you have a rom or KK rom that is from your region or this isn't going to work...
I have rooted mu samsung galaxy note edge n couldnt able to restart my phone its showing the message custom binary blocked bybreactivation lock
mejam said:
Hello, i have just installed the ECHOE ROM in my note 3, i am from Italy.
when I restarted the phone came out the message : CUSTOM BINARY BLOCKED BY RACTIVATION LOCK and doesn't start.
Help me please.
Click to expand...
Click to collapse
My bro
Tonight I faced the same problem but I try something I hope you will try and your problem with note 3 n9005 will be solved
1-you must have official rom on your PC for your note3
2-open it with winrar and extract recovery.img
That is the official recovery
Transform it from recovery.img to recovery.tar.md5
Read this post
https://forum.xda-developers.com/showthread.php?t=2446269
3-download odine
4-put your note 3 in download mode by pressing volume down +home key then press power key after that press volume up
5-connect your device (you must have Samsung drive)
6-press pda in odine choose your official recovery.tar.md5 and click start
Wait till your phone restarted
Congratulations
I try this method before tell you so it will help.
Thanks
Related
Hi
For the beginning i want to say thx to the people who will try help me.
Samsung Note 3 SM-9005
Rom: NB3 4.4.2 (kitkat)
I should post it as a reply to the chainfire's post on cf auto root but i can't cause i am a new on xda (and he didn't allow me )
So what is my problem ?
When i tried root with CF all is ok but when odin say 'PASS' there is no recovery boot (the install process, the red android logo)
What i have ? > After my flash my phone try to boot (with Se Enforcing + 2 other stuff blue red and yellow i guess) but my phone can't boot (yes even boot) he only reset and try re-booting.
chainfire's say
*NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This will start the install process.*
Click to expand...
Click to collapse
So i tried it, i unchecked the auto-boot, flash my phone pull the battery and press the button (without the battery), and after my phone turn off.
When i turn on >> same issue boot loop all time
And to have access on the phone i must go on the downlaod mode and click restard phone...
Well if u could help me .... 90% of my app require root x) :laugh:
Is this the file you used? There's 2 files, one for 4.4 and the other for 4.3. Try flashing the file again.
Yes i used this file
i forgot to say that kingo root is so buged i mean i try also to root with him (on 1s)
He put my phone on download, install the recovery ect
Result: a fake root, in fact even if i have SuperSU (he installed) He said me that i have no binnary installed
I also checked on "Root Checked" no root here
BUT on download mode: custom os + custom binnary
And his chinese recovery work
1 hour ago i used my GN2 to see if maybe it's my computed who have issue with kingo root
Result: Root perfectly my phone
I also forgot to say that i used different odin (1.85,3.09 ect) on admin
And i tried the NA6's rom (maybe was the rom ^^' but nop still no root)
French's user said:
Hi
So i tried it, i unchecked the auto-boot, flash my phone pull the battery and press the button (without the battery), and after my phone turn off.
When i turn on >> same issue boot loop all time
And to have access on the phone i must go on the downlaod mode and click restard phone...
Well if u could help me .... 90% of my app require root x) :laugh:
Click to expand...
Click to collapse
I re-read your reply and I'm a little confused. Did you pressed all buttons after removing the battery? Also, there is no restart phone in download mode, you can only get out of download mode by pressing power button for a few seconds or remove the battery.
Lastly, maybe check you have the correct samsung usb drivers and reactivation lock is off.
hey_joe said:
I re-read your reply and I'm a little confused. Did you pressed all buttons after removing the battery? Also, there is no restart phone in download mode, you can only get out of download mode by pressing power button for a few seconds or remove the battery.
Lastly, maybe check you have the correct samsung usb drivers and reactivation lock is off.
Click to expand...
Click to collapse
Well i know but i didn't even really understand the process to manually boot the recovery (the chainfire's quote)
what i did ? i flash my phone when odin say "reset" i just pull the battery on the table and next press buttons (Volup+home+power)
My phone turn off i replace the battery and i get the booting loop
Maybe my way to process is wrong, i don't even know chainfire don't really explain in details the way to do it....
For the driver i deleted all and re-installed by kingo but in fact all time my device is detected (in all mode) and COM if alway here (also the flash is correct)
I think maybe my process is badly done (maybe i can't understand cause im french)
Here's how I would normally do it.
- download the file and extract to a folder/location of choice
- put phone in download mode by pressing power + vol down + home button all at the same time until something comes up on the screen then let go of the buttons then press vol up then connect to usb on pc
- go to where you extracted the downloaded file, open odin and put the tar.md5 file in the PDA slot and click start
Odin will flash file and automatically restart to apply root ( red android with red letters ) then restart again to android.
OMG dude that work thx to you :laugh::laugh::laugh::laugh::laugh::laugh:
Ok the last post i mean i didn't understand the process of the boot recovery manually (with autoboot unchecked)
But i least this time i used a different thing- what ?- A nokia usb cable
And this time that work and im sure before i did all u said to me.
I worked on 2 night x)x)
Anyway dude thx to help me
No problem.
Enjoy your phone :good:
I've encountered the following problem with my Galaxy Note 4: I just bought it online from a guy who turned out to be a fraud and I was not able to find or contact him again via the internet market place. So that was really stupid of me...and expensive...and I regret it very much and with hind site I should have picked up the signs but...o well you got the picture...I got ripped.
Anyways after careful inspection it turned out to be a real genuine Note 4 N910F with 64 Gb but with a korean or chinese or something recovery mode (I saw it once when I got home), an imei not to be found on any stolen phone list and working correctly with an european rom that includes English and Dutch at that point.
That's when I decided to factory reset it and then I got into trouble again: For some reason it got stuck in a boot loop with just a No Command message. Normally you can reach the recovery mode by pressing Volume Up +Home +Power but now nothing happens. It's not a real brick but with just the No Command message and no access to the recovery mode I don't know how to fix this.
Can anyone help me with a clue on how to get out of a No Command loop without recovery mode? Or how to get into recovery mode if start with Key Up etc does not work? Or any other clue that could help me?
Thanks in advance!
Kind regards,
Rene (aka the guy who got ripped off but hopes to save the phone)
Can you get into download mode?
Thanks dr.mOx for responding!
I tried both volume up+home+power to get into recovery mode and also volume down+home+power to get into download mode but in both cases the device starts and shows me the android robot on it's back with a red warning triangle containing an exclamation mark and below the robot the message "No command." . The screen blinks every two or three seconds. The power button is not shutting the phone down in this state. I have to remove the battery to retry.
Battey out. Then in. Go to download mode. Flash stock rom with odin
Sent from my SM-N910F using XDA Premium 4 mobile app
Hi Ozzyblack. The thing is that, if I'm correct, when I press volume down+home+power to get into download mode I expect some sort of menu to appear asking to go into download mode or not. Am I correct? I saw same sceendump about that. And now I keep getting the No Command window. Do you think I miss something here? I do press volume down first, then home (keeping volume down pressed), and them the power button (keeping all buttons pressed). After a few seconds the display turns a bit more grey for a sec and then the android robot appears. But no message of sorts about getting into download mode.
Hi reborn67.
**Only if you have a galaxy note 4 N910F model**
If you can get into download mode your safe, and you can reflash an offical ROM, there is no menu system in Download mode so don't worry.
Don't stay in download mode forever or a long time, i.e. power off and wait till you have the ROM and Odin before you go into download mode as it sometimes times out even though it still shows in download mode.
Go to here http://samsung-updates.com/details/37086/Galaxy_Note_4_Snapdragon/SM-N910F/DBT/N910FXXU1ANK4.html download the ROM, and then download Odin here https://mega.co.nz/#!UdRRyCAT!H4FyVxYynNWvXqRNmnpMGQRCP-dG3uykgP2pT4rh8Ek
These are the instructions from sammobile on how to flash ROm with Odin.Instructions
1-Extract (unzip) the firmware file
2-Download Odin v3.09
3-Extract Odin zip-file
4-Open Odin v3.09 (make sure the extracted rom file "N910FXXU1ANK4_N910FOXA1ANK4_N910FXXU1ANK4_HOME.tar.md5" is in the same folder as Odin before opening up Odin.
5-Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6-Connect phone and wait until you get a blue/orange sign in Odin (above text top left ID:COM)
7-Add the firmware file to AP / PDA
IMPORTANT** Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
I always do a hard reset after flashing new ROM's (settings, backup and reset, factory data reset)
I have a network locked UK N910F on EE and use this German ROM with no problems, this ROM has little bloatware.
Thanks gadjet. I do have odin and a stock rom ready for use now:
1-I tested odin and the usb port plus driver setup with my 'old' galaxy s4 and within a second the ID:Com in Odin turns blue. So that seems to be working fine.
2-So now I put in the Note 4 battery and connect to usb WITHOUT ANY KEYS PRESSED...just to test! And the usb connection bleeps from windows confirm a device is connected...so far so good.
3-Last and most important step fails: Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons), the 'no command' robot is still there, and also connect phone and wait until you get a blue/orange sign in Odin (above text top left ID:COM) never happens. And also there are no windows usb connection bleeps so apparently there's a difference when I tried to select download mode.
Please know that I'm really thankful for all the great tips. But I guess I'm still missing something here.
Kind regards,
Rene
Can you try this,.
1-press and hold Home + Power + Volume up buttons
Do you get a menu?
gadjet said:
Can you try this,.
1-press and hold Home + Power + Volume up buttons
Do you get a menu?
Click to expand...
Click to collapse
Tried it. I do not get a menu. Just the No command robot.
reborn67 said:
Tried it. I do not get a menu. Just the No command robot.
Click to expand...
Click to collapse
OK next.
1-press and hold Home + Power + Volume Down buttons, now open up samsung kies and see if it repairs your note 4
gadjet said:
OK next.
1-press and hold Home + Power + Volume Down buttons, now open up samsung kies and see if it repairs your note 4
Click to expand...
Click to collapse
Unfortunately Kies 3 (latest update) does not recognize any connected device when I try this. The No command screen is laughing at us again
This is different
Turn your phone off or make sure it’s turned off.
Press and hold the Volume Up, Home and Power buttons simultaneously.
When the phone vibrates, release the Home and Power buttons, but keep pressing Volume Up button.
gadjet said:
This is different
Turn your phone off or make sure it’s turned off.
Press and hold the Volume Up, Home and Power buttons simultaneously.
When the phone vibrates, release the Home and Power buttons, but keep pressing Volume Up button.
Click to expand...
Click to collapse
There's no vibration...just the No command window.
OK, corrupt boat-loader Samsung service centre repair job, or local phone repair job.
Requires boot chip to be reflashed at board level.
Sorry we couldn't get you going bud..:crying:
Thanks for trying guys!
I'll see if I can find a local phone repair store.
I used to have the same problem with my SM-P605 when I flashed some ROM in the summer, the only special thing I did was not giving up and after all I got to the Download mode. Hope it'll work for you without Service.
Good Luck
Today I went to visit an official Samsung store. They told me I bought a very good but fake Note 4 and it is not likely it can be recovered. The weight is incorrect...a bit to heavy. Also the serial numbers are unknown in the samsung database and some other details were not correct. Thanks again for trying to help me! I now officially have a really expensive brick that looks like a note 4.:crying:
same issue i am facing..i tried all..but it shows no command error and no menu shows up
ill be going to get my phone checked today..if i get any way out ill let u know
What you did later to recover ? I'm facing the same problem I've visited samsung service centre but they are unable to solve it.
Can you guys help me for my phone Samsung note 4 because its just keep repeating in a logo SAMSUNG...
I tried pressing volume down+home button+power then got "WARNING CUSTOM OS... and stuff and then I press volume high+home button+power then I got the logo SAMSUNG that keeps on repeating. Please help me what to do
please anyone help me
i was tying to install latest firmware G935FXXS1APG3 through odin
i got this messafe on me screen please check photo
Use the emergency recovery function in the smart switch pc software
i cannot boot into download mode
smart switch doesnt recognize samsung g7 edge nor does kies
thank you
alleshi said:
please anyone help me
i was tying to install latest firmware G935FXXS1APG3 through odin
i got this messafe on me screen please check photo
Use the emergency recovery function in the smart switch pc software
i cannot boot into download mode
smart switch doesnt recognize samsung g7 edge nor does kies
thank you
Click to expand...
Click to collapse
you need to reinstall the samsung drivers on your computer then plug in your phone, open smart switch and follow instructions.
Previously your phone installed the drivers, since you have a problem with your phone, you need to install the driver on your computer to recognize the phone not the other way around.
Emergency Recovery function with Smart switch
Hi
I got the same blue screen but my smart switch program doesn't recognise the model number and S/N.
The phone was purchased in India.
I disconnected, updated drivers and reconnected.
I have SM-J500F and it has Marshmallow 6.0.1
hsd1 said:
Hi
I got the same blue screen but my smart switch program doesn't recognise the model number and S/N.
The phone was purchased in India.
I disconnected, updated drivers and reconnected.
I have SM-J500F and it has Marshmallow 6.0.1
Click to expand...
Click to collapse
It doesn't have to recognize your model and s/n, just write them yourself.
I have actually encountered this before.
Just do this:
• Hold Power & Volume Down until the phone turns off ( assuming that there is no way for you to battery pull )
• Immediately without letting go of the Power & Volume Down button, press the home button as well.
• If the timing is not correct just retry.
Once you can get into download mode, you don't need the samsung software anymore. Just go online and find your default stock rom & bootloader etc and flash em'
Caezer99 said:
I have actually encountered this before.
Just do this:
• Hold Power & Volume Down until the phone turns off ( assuming that there is no way for you to battery pull )
• Immediately without letting go of the Power & Volume Down button, press the home button as well.
• If the timing is not correct just retry.
Once you can get into download mode, you don't need the samsung software anymore. Just go online and find your default stock rom & bootloader etc and flash em'
Click to expand...
Click to collapse
Thank you... I'll try that once again.
sajjid_9 said:
Thank you... I'll try that once again.
Click to expand...
Click to collapse
If you still need help you can PM me... Make sure to keep trying because sometimes people cannot get the timing correct!
Hi, i have a question. My phone don't show me the option software installation when I connect it with my pc or Mac, and I have some other issues with my firmware. Can I reinstall the stock firmware with Odin without rooting my device and without tripping the knox?
My phone is: sm g935f
caezer99 said:
i have actually encountered this before.
Just do this:
• hold power & volume down until the phone turns off ( assuming that there is no way for you to battery pull )
• immediately without letting go of the power & volume down button, press the home button as well.
• if the timing is not correct just retry.
Once you can get into download mode, you don't need the samsung software anymore. Just go online and find your default stock rom & bootloader etc and flash em'
Click to expand...
Click to collapse
thank you so much!!!!!!!! I thought my tablet died. Thanks so much!!!
Caezer99 said:
I have actually encountered this before.
Just do this:
• Hold Power & Volume Down until the phone turns off ( assuming that there is no way for you to battery pull )
• Immediately without letting go of the Power & Volume Down button, press the home button as well.
• If the timing is not correct just retry.
Once you can get into download mode, you don't need the samsung software anymore. Just go online and find your default stock rom & bootloader etc and flash em'
Click to expand...
Click to collapse
Thank you i can atleast boot into download mode thanks to your tutorial. now i have to get through a succesfull odin stock firmware instalation. which failed me before.
Caezer99 said:
I have actually encountered this before.
Just do this:
• Hold Power & Volume Down until the phone turns off ( assuming that there is no way for you to battery pull )
• Immediately without letting go of the Power & Volume Down button, press the home button as well.
• If the timing is not correct just retry.
Once you can get into download mode, you don't need the samsung software anymore. Just go online and find your default stock rom & bootloader etc and flash em'
Click to expand...
Click to collapse
Hi so i have this issue on my s8 but ive had it the BL and it still errors out on me have you got any other ideas of it do it.
I found a way you wouldn't expect. Run odin, flash a recovery, flash stock rom, and you good to go. Odin acctually find the device. .
sebbialsvikk said:
I found a way you wouldn't expect. Run odin, flash a recovery, flash stock rom, and you good to go. Odin acctually find the device. .
Click to expand...
Click to collapse
This worked for me on a SM-T510 (2019) tablet.
Hello
Before 1 week I return from my work and I try to turn on my s7 edge to check my emails, messages, etc
But it doesn't work, I try to charge it but its dead and no reaction
So I plug it in my laptop and then I get a message with ONLY RED words say bootloader... *((USB Dubbing its Turned ON I forget to turn it OFF))
Acctually before I get this problem, I Try to use the DR.fone app in desktop to recover a lost photo for non-root device, after all I don't find the pic, then I close it but I forget to turn off the USB Dubbing and I forget to delete it
Please help guys ,my warranty didn't do any thing
So if there is no way to relive my device, I need just my files back its very important, ((samsung backup turned off))
Thanks!
imgur.c0m/a/Y7u7W
Imgur.c0m/a/pDQdy
Note: im new in xda so I can't put pictures or url
So I change com to c0m
Change it to see the problem
Hello, download the latest bootloader of the S7Edge, and then put your phone in download mode. With odin, flash the bootloader (BL case) to your phone.
NeoVander said:
Hello, download the latest bootloader of the S7Edge, and then put your phone in download mode. With odin, flash the bootloader (BL case) to your phone.
Click to expand...
Click to collapse
Thank you! But acctually im noop in odin
so can u tell me what I do step by step? And another thing
I CAN'T get into the download mode, it won't work with me,
But when I connect it to odine, I can see my device there and I can adding files maybe
So where I can download the stuff and what I do?
+
There is a way to recover my data?
Thanks!
Phone part :
~ Get into Odin Mode :
Press "Power" + "Volume Down" 8 seconds
Then press "Volume Down", "Power" and "Home" until you see a message, then press "Volume Up"
You are now in the Odin Mode / Download Mode.
Computer part :
~ Download the latest BootLoader and Modem here : https://www.androidfilehost.com/?w=files&flid=54002
~ Download the latest odin here :
http://odindownload.com/download/Odin3_v3.12.3.zip
~ Start Odin, and in the "AP" case, select the "bootloader".tar.md5
~ Connect the S7 Edge to your computer
~ Press "Start"
The phone should reboot
NeoVander said:
Phone part :
~ Get into Odin Mode :
Press "Power" + "Volume Down" 8 seconds
Then press "Volume Down", "Power" and "Home" until you see a message, then press "Volume Up"
You are now in the Odin Mode / Download Mode.
Computer part :
~ Download the latest BootLoader and Modem here : https://www.androidfilehost.com/?w=files&flid=54002
~ Download the latest odin here :
http://odindownload.com/download/Odin3_v3.12.3.zip
~ Start Odin, and in the "AP" case, select the "bootloader".tar.md5
~ Connect the S7 Edge to your computer
~ Press "Start"
The phone should reboot
Click to expand...
Click to collapse
Thank you!! I will do it soon...
**Before you comment, all I need are links to guides. You don't have to tell me step for step, I wouldn't do that do ya**
So earlier this week I was tweaking some settings through 3D Toolbox and I managed to essentially kill my phone. Now whenever my phone 'boots' it will show my startup screen with its usual vibration, after which the screen will go blank and it will not boot.
I killed it by enabling kernel exceptions in partition cleaning in the 3D Toolbox app; after I rebooted my device as told, it never booted again. I'm only trying to get my device image off it so I can dump the phone and start again, keep in mind I'm still learning about the operating system so I was bound to break something lol.
I'm worried what I've done has trashed my system image and I've essentially lost what was on my phone (lets hope that isn't the case :crying if anyone knows what I've done wrong and how to fix it please help a brotha out :fingers-crossed: Also when I try to go into recovery mode I'm greeted with "Recovery is not Seandroid Enforcing" if that helps, as I have no idea what it means.
If you want to pull off the data, try installing TWRP, booting into TWRP, mount the data partition, and copy data to your PC.
If you don't need anything on the phone, you could use Odin to flash the latest stock ROM.
audit13 said:
If you want to pull off the data, try installing TWRP, booting into TWRP, mount the data partition, and copy data to your PC.
If you don't need anything on the phone, you could use Odin to flash the latest stock ROM.
Click to expand...
Click to collapse
Thanks for the reply! But I'm very new to rooting and such and only touch what I know and what I need so I don't know how to go about this. If you could be so kind as to tell me the steps or to give me a guide I'd be on my way.
Thanks,
Jazzy
What is the model number shown in download mode?
audit13 said:
What is the model number shown in download mode?
Click to expand...
Click to collapse
SM-N9006 I believe is what you're looking for right?
Twrp.me your device
Use N9005 twrp as per previous N9006 posts .
JJEgan said:
Twrp.me your device
Use N9005 twrp as per previous N9006 posts .
Click to expand...
Click to collapse
Buddy I have no idea what these terms mean, I'm a big ol' noobie. I need my hand held lmao
This one.
https://dl.twrp.me/hltechn/twrp-3.2.3-0-hltechn.img.tar.html
JJEgan said:
This one.
https://dl.twrp.me/hltechn/twrp-3.2.3-0-hltechn.img.tar.html
Click to expand...
Click to collapse
Alright I've found a TWRP for it, do I download this and load it through ODIN? I'd still need to get a backup of my device before I'd wanna load an image up, so I still need a program to do that. Any suggestions for a program like that?
shnazzyjazzy said:
Alright I've found a TWRP for it, do I download this and load it through ODIN? I'd still need to get a backup of my device before I'd wanna load an image up, so I still need a program to do that. Any suggestions for a program like that?
Click to expand...
Click to collapse
Again, I have no idea what I'm doing with these, if you have a guide for stuff like this I'm all over that.
Step 2) Turn OFF your mobile and go to Download Mode by pressing and holding the Volume Down + Home Buttons together for few seconds followed by Power button then proceed with volume up.
Step 3) Now open ODIN on your PC and connect your Galaxy Note 3 to your computer.
Step 4) Once your phone is successfully connected to your PC, the ID:COM box on ODIN will turn blue (or yellow) and will show the COM port number.
Step 5) Click on pda in odin (if odin 3.09 choose AP) and choose the " TWRP .tar" file.
Step 6) Tick "Auto Reboot" and "F. Reset Time" options and make sure that "Re-Partition" is unchecked
!!!!DO NOT CHECK "Nand Erase All" IN ANY WAY!!!!
Step 7) Click on Start button in ODIN window to start the flashing process. The process will take few minutes to complete.
DO NOT UNPLUG USB CABLE WHILE EXECUTING THE PROCESS, YOU MAY BRICK YOUR PHONE!
Step 8) When the installation is completed, you read a "Reset " then a "Pass". your phone will restart
JJEgan said:
Step 2) Turn OFF your mobile and go to Download Mode by pressing and holding the Volume Down + Home Buttons together for few seconds followed by Power button then proceed with volume up.
Step 3) Now open ODIN on your PC and connect your Galaxy Note 3 to your computer.
Step 4) Once your phone is successfully connected to your PC, the ID:COM box on ODIN will turn blue (or yellow) and will show the COM port number.
Step 5) Click on pda in odin (if odin 3.09 choose AP) and choose the " TWRP .tar" file.
Step 6) Tick "Auto Reboot" and "F. Reset Time" options and make sure that "Re-Partition" is unchecked
!!!!DO NOT CHECK "Nand Erase All" IN ANY WAY!!!!
Step 7) Click on Start button in ODIN window to start the flashing process. The process will take few minutes to complete.
DO NOT UNPLUG USB CABLE WHILE EXECUTING THE PROCESS, YOU MAY BRICK YOUR PHONE!
Step 8) When the installation is completed, you read a "Reset " then a "Pass". your phone will restart
Click to expand...
Click to collapse
Bad news: I went and done this, it passed and everything but still won't turn on, or get past the loading screen. At this point I just wanna get my info off of it.
shnazzyjazzy said:
Bad news: I went and done this, it passed and everything but still won't turn on, or get past the loading screen. At this point I just wanna get my info off of it.
Click to expand...
Click to collapse
Burn it
Joking... So follow all the steps written by JJEgan, except for Step 6 : DON'T tick "Auto reboot" then flash.
Step 7 : When Odin shows "Passed", unplug the phone and take off the battery for 10sec.
Step 8 : Put the battery back and directly boot to recovery (Vol+, Power, Home).
shnazzyjazzy said:
Bad news: I went and done this, it passed and everything but still won't turn on, or get past the loading screen. At this point I just wanna get my info off of it.
Click to expand...
Click to collapse
Try again but only check f reset time and flash.
When you see the word "RESET" in the status window, remove the USB cable from the phone, remove the battery, replace the battery, use the buttons to boot into recovery.