[ROM][A500][Jellybean 4.2.2 | CM10.1][2013/09/26] - Acer Iconia A500

Hi Guys Here is my first ROM I compiled it on Linux Mint Mate AMD64 and I currently have it running on my tablet, So far all is good. If any one els would like to help me test it that would be great! I would love any feedback as to if anything is not working right, I have only been running it for part of the day today and as I said so far all is goo!! I am running the cpu's overclocked @ 1.5.
Here are a few screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just do a full wipe and flash the rom then flash gapps
This is my first build, and I worked very hard on it, so I look forward to your input, thanks.
I am also working on building a CM 10.2 Android 4.3 a500 rom to and will upload that once it is tested.
Here are the links to download:
cm-10.1-20130926-UNOFFICIAL-a500.zip : First Build
cm-10.1-20131025-UNOFFICIAL-a500.zip : Second Build
gapps-jb-20130812
Source Code
PS - see the attachment for a script to help you with wipes between falshing roms
Thanks - Kaiji

Oh yeah I forgot to add the links for the source I used, here they are, thanks to CyanogenMod & and all the devs & mods who have worked on this project.
https://github.com/CyanogenMod
https://github.com/KaijiHakaroku/device_acer_a500
https://github.com/WizBang/kernel_acer_a500
https://github.com/KaijiHakaroku/vendor_acer_a500
Thanks

Downloading. Will try it right away and report

DLSlith said:
Downloading. Will try it right away and report
Click to expand...
Click to collapse
Thanks,

KaijiKun said:
Thanks,
Click to expand...
Click to collapse
Well, I tried to flash your ROM buy it said zip was invalid. After that I tried to restore my backup and reflash the tablet, but I'm still stuck at Booting Primary Kernel :/

DLSlith said:
Well, I tried to flash your ROM buy it said zip was invalid. After that I tried to restore my backup and reflash the tablet, but I'm still stuck at Booting Primary Kernel :/
Click to expand...
Click to collapse
hmm, thats strange, I flashed the same file and am still running it with no problems, did you do a full wipe first? I will double check the uploaded file against the md5sum file and test it again, keep me updated.

KaijiKun said:
hmm, thats strange, I flashed the same file and am still running it with no problems, did you do a full wipe first? I will double check the uploaded file against the md5sum file and test it again, keep me updated.
Click to expand...
Click to collapse
I double checked the file I uploaded to 4Shared and it checked out, I dont know what could have gone wrong for you, maybe the file was not completely dowloaded, or somehow it got changed after you downloaded it, or while transfering it to your sdcard.. which recovery are you using? I am using Thors CWM touch 1.7.3 and Skrilax_CZ v9 bootloader. if you are still having trouble, PM me and I will give you my phone # I know that I can help you get any rom you want flashed, or if you have a backup you can use that
here is the terminal output from the files md5sum check:
[email protected] ~/Downloads $ md5sum cm-10.1-20130926-UNOFFICIAL-a500.zip
920136e012b2483c1cd3e2691ebe603f cm-10.1-20130926-UNOFFICIAL-a500.zip
it perfectly matches the file I created and flashed to my tablet.
920136e012b2483c1cd3e2691ebe603f /root/Source/out/target/product/a500/cm-10.1-20130926-UNOFFICIAL-a500.zip
Good luck, and let me know how it goes
Thanks - Kaiji

Yeah, I know, it's not your fault. I just got the tablet going again and I'm about to download everything once more.
Sent from my A500 using xda app-developers app

DLSlith said:
Yeah, I know, it's not your fault. I just got the tablet going again and I'm about to download everything once more.
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
I am glad your tab is working again, I am working on CM10.2 jb 4.3 and will post it in a few days
See ya, and good luck a500 cm10.2 Source

You sir, is my hero
Flashed your ROM again, it's the first JB ROM my tab succesfully loads and so far everything is working as expected. Count me in for testing your next ROM, I'll be testing this one for now
Sent from my A500 using xda app-developers app

My biggest concern is if the mic is working? Thanks.

Working stuff so far:
- WiFi
- Bluetooth
- Both Cameras
- Photo and Video Recording
- USB Port
- G-Apps
Not Working:
- Mic
- YouTube app
Sent from my A500 using xda app-developers app

DLSlith said:
Working stuff so far:
- WiFi
- Bluetooth
- Both Cameras
- Photo and Video Recording
- USB Port
- G-Apps
Not Working:
- Mic
- YouTube app
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
OK Thanks.

First.. Id like to commend your efforts. You didnt over-bloat or inflate the ROM beyond what is typically in AOSP (which is rare).
Second.. Went off without a hitch as far as I am aware its fully functional (I just banged around on it to get it setup for my wife (Im retiring my use of it).
I did notice a 'video shift' using Skrilax bootloader.. for a few seconds after I get the 'booting primary kernel' message the video goes a bit nuts but then returns to normal.
Should you ever feel cocky and choose to do a build using AOKP I would be MOST interested in the outcome... Ive been beging and pleading with them for MONTHS with no luck but it too is based from CM source code with even more tweaks and such.
Side note.. Im actually a bit saddened to see the ROMs leaning more towards a 'phone' look rather than the 'tablet' look the iconia originally had.. I got used to it and now its about useless to me. **This is no reflection on the ROM baker but rather a personal observation.

DLSlith said:
Working stuff so far:
- WiFi
- Bluetooth
- Both Cameras
- Photo and Video Recording
- USB Port
- G-Apps
Not Working:
- Mic
- YouTube app
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
I think I have the mic figured out, but it is going to be another day before I can compile the rom again, so hopefully I can get youtube working to by then, I will post it after I recompile, so look for a post Sunday night or so.. and thanks guys for the input, I really appreciate it. As for an AOKP, I will try putting one together after I get this one totally right....
Thanks - Kaiji

I'm also going to be doing some testing for you to get this ROM rolling along.
TEAM US!™

KaijiKun said:
I think I have the mic figured out, but it is going to be another day before I can compile the rom again, so hopefully I can get youtube working to by then, I will post it after I recompile, so look for a post Sunday night or so.. and thanks guys for the input, I really appreciate it. As for an AOKP, I will try putting one together after I get this one totally right....
Thanks - Kaiji
Click to expand...
Click to collapse
Nice, as soon as we get a working Mic I'll flash this on my tab again for testing. And I would really appreciate it if you can also check on YouTube app since I get to use YT several times a day, but browser access for YT is good enough for now.
Sent from my A500 using xda app-developers app

which recovery is reccomended? im currently still on ezterrys
Sent from my A500 using Tapatalk 2

DLSlith said:
Nice, as soon as we get a working Mic I'll flash this on my tab again for testing. And I would really appreciate it if you can also check on YouTube app since I get to use YT several times a day, but browser access for YT is good enough for now.
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
I recompiled and still no working mic, I have a few more ideas, but I am going away for 2 weeks and I wont be able to work on this until I return...
I have about 24 hour until I depart, and the compiling process will take about 18 hours on my setup, so if this try works I will have something for ya, but more likely I wont have this worked out until I return....
But I am going to keep on trying to get this right, and soon enough it should be all worked out

I added another build to this post. The new build is a lot stronger, and although the mic is still not working, everything else is working better and faster in this build. I know everyone else has moved on to CM 10.2 now, and I am still screwing around with this one, hehehe I just like the 10.1 build, and I am working diligently on getting an updated android kernel to run on the A500 v3.x I have made some progress in that I have had one succesful build of kernel v3.1.10 that was able to boot yay!! I managed to get the acer t20 platform drivers from the old kernel into the kernel source from the A700s t30 source.... wow that was a lot of mess too. but the kernel was really buggy and the device would not stay running, and then shut down out of the blue shortly after booting up.... I will keep on working on it, I am actually pretty new to this stuff, and just started poking around, then started to head off in my own direction, lol. But I am coming to the conclusion that I may need some help here, lol. we will see.. I hope to soon have a build to post with the newer kernel, but right now things are such a mess, it may bee a while.
But any way you will find that the second build, posted for download at the start of this thread, is a much stronger, and better build of this software. enjoy
- Kaiji

Related

[ROM]{OFFICIAL}[MIUI][26/5/1]MyUI Euphoria 2.5.13 Give it a Whirl!!!1

Hello all,
MyUI Team presents MyUI Euphoria !!!
(And it should be the Euphoria!)
Thanks to read everything prior flashing...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Main features
Based on MIUIAndroid 2.3.30 v2
Everything works! (except OTA updates, we're working on it)
Aroma Installer
ICS control application - gives you more... well, control...
Three way reboot
Glitch kernel
QQ launcher in /data
Google apps.
If something doesnt work, the fix must be in the second post.
FAQ:
- How to set up notification panel: long press on the "..." icon on the right of toggles​
Installation:
- Flash this zip via CWM
- Wipe data/factory reset if not comming from Galnet MIUI-v4, drZMIUIv4, or MyUI Euphoria.
- after a first quick flash (if comming from a BML base) recovery may bootloop. Pull battery and flash again (this is due to different SD card mounting points between roms and kernel)
- First boot will take some times, please wait for lockscreen​
Versioning clarification:
Euphoria is based on CM9b14 and MIUI framework
Build number MyUI is like that: y.m.d_hhmm, it means the rom has been cooked on year 201y, month m, day d, at hh hours mm minutes[/indent]
To support us, please do not block the ads and rollus.net myui.fr areas, and visit our website, our forum or our download zone regulary
You may also press thanks button and/or donate
There is also a beta test program, please PM me if interested and motivated
Thanks to:
Oxicotton (for modem)
Tk-glitch and Glitch team (for glitch kernel, found here:http://forum.xda-developers.com/showthread.php?t=1459475 Source: https://github.com/organizations/Glitchkernel)
Stratosk (for semaphore ICS Found here:http://forum.xda-developers.com/showthread.php?t=1468795 Source:https://github.com/stratosk/samsung-kernel-aries
RollUs (Main Rom developer)
Team My-UI
++
RolluS and Sepherian​
I Have a donate button now! someone want to test it out!?!
~reservered for a future use. (something, for now it just holds some funny stuff.)~​
Changelog. Oldest down bottom, newest towards top.
2.4.28-2319 -> 2.4.29-1858
* Updated base to MIUIAndroid 2.4.27 ODEX (Thanks to Andy Thomson)
* Fixed FaceUnlock
* Added Mi File Explorer (Thanks to apooonet)
2.4.23-2304 -> 2.4.28-2139
*fixed camera issue
removed updateme.apk
2.4.13-0143 -> 2.4.23-2304
Base MIUIAndroid 2.4.20 ODEX (Thanks to Andy Thomson)
Added Google Apps ics-20120317 (including FaceUnlock)
Tweaked and cleaned build.prop
Optimised apps (reodex)
Fixed system data wipe and Factory reset
2.4.7-1793 -> 2.4.13-0143
Base MIUIAndroid 2.3.30_v2 (Thanks to Andy Thomson)
Fixed wipe problem (Thanks to Stormlord)
Fixed Camera, Music, & Horloge FC (Thanks to Kyo)
2.4.6-1917 -> 2.4.7-1739
*MARKET WORKS! HELL YES!
2.4.6-0002 -> 2.4.6-1917
*Base MIUIAndroid 2.3.30_v2
*Fixed wipe problem
*Fixed Camera, Music, & Horloge FC
Thanks - I will give it a shot and let you know how it works. I'm looking for something very stable and easy to use for my wife's phone.
let the game begins
RichMD said:
Thanks - I will give it a shot and let you know how it works. I'm looking for something very stable and easy to use for my wife's phone.
Click to expand...
Click to collapse
should be very stable, ive gotten no problems, and im working on the market fix.
Thank you very much, downloading and will try later.
Figured out a fix to the market. But its a full wipe update. and it updates a few other things. Ill post it once im done testing, with a full changelog of course.
Happy easter! hope you enjoyed this little egg!
[EDIT] Still getting a server error on market. Is anyone else getting an error? any fixes you guys know of?[/EDIT]
sepherian said:
Figured out a fix to the market. But its a full wipe update. and it updates a few other things. Ill post it once im done testing, with a full changelog of course.
Happy easter! hope you enjoyed this little egg!
[EDIT] Still getting a server error on market. Is anyone else getting an error? any fixes you guys know of?[/EDIT]
Click to expand...
Click to collapse
Sorry everyone, the Market enabler doesn't help with server error issue, i tried it it didn't work and am hence editing my post.
Downloading.. will flash it later
btw whats the second zip ? 2.4.6-1917 - update/fix ?
Edit: i̶̶m̶̶ ̶̶g̶̶e̶̶t̶̶t̶̶i̶̶n̶̶g̶̶ ̶̶t̶̶h̶̶e̶̶ ̶̶s̶̶e̶̶r̶̶v̶̶e̶̶r̶̶ ̶̶e̶̶r̶̶r̶̶o̶̶r̶̶ ̶̶o̶̶n̶̶ ̶̶m̶̶a̶̶r̶̶k̶̶e̶̶t̶
kevinnol said:
Downloading.. will flash it later
btw whats the second zip ? 2.4.6-1917 - update/fix ?
Edit: Im getting the Server error on market
Click to expand...
Click to collapse
2.4.6-1917 is an updated version of the rom. If fixes and updates a few things.
The market error is expected. Tell me if you manage to fix it. We are trying really hard to fix it on this end.
I just tried to download the fix zip but couldn't, i have tried it 3 times already but still get cannot open zip as archive error.
But the main rom is working, just flashed it about an hour ago.
Installation is great experience because of the Aroma installer, Congratulations on implementing that. I also want to do it in the rom but i have no idea how to do that, will have to do lot of reading.
Bootanimation looks good in Orange colour.
Also good thinking on QQ launcher, same Miui experience with an App drawer.
All required things are working quite well. Except the Market but it is obviously a known issue. Also i had previously mentioned using Market Enabler for getting around the Server Error issue, it doesn't work sorry for that, i will edit my post now.
Also turning off the icon shadow in launcher settings gives more smooth scrolling if you have lot of apps.
No major issues faced, will let you know in due time.
anishmahadikz said:
I just tried to download the fix zip but couldn't, i have tried it 3 times already but still get cannot open zip as archive error.
But the main rom is working, just flashed it about an hour ago.
Installation is great experience because of the Aroma installer, Congratulations on implementing that. I also want to do it in the rom but i have no idea how to do that, will have to do lot of reading.
Bootanimation looks good in Orange colour.
Also good thinking on QQ launcher, same Miui experience with an App drawer.
All required things are working quite well. Except the Market but it is obviously a known issue. Also i had previously mentioned using Market Enabler for getting around the Server Error issue, it doesn't work sorry for that, i will edit my post now.
Also turning off the icon shadow in launcher settings gives more smooth scrolling if you have lot of apps.
No major issues faced, will let you know in due time.
Click to expand...
Click to collapse
The second zip is going to be re uploaded. I'll do that tonight.
Everything running great with the exception of the market. Any idea what is causing the server error?
Sent from my "SGH-I897" using xda premium
joshlevinson said:
Everything running great with the exception of the market. Any idea what is causing the server error?
Sent from my "SGH-I897" using xda premium
Click to expand...
Click to collapse
They are still looking into it, will have a fix when they fix it.
anishmahadikz said:
They are still looking into it, will have a fix when they fix it.
Click to expand...
Click to collapse
Thanks...I was asking more to see if I could help, not to bug for an ETA.
Not sure if anyone else has seen this problem, but I'm unable to install Titanium Backup. Error comes up mid install and says that there is not enough free space. However, this is on a FRESH install (wiped everything) and is the first app I tried to install. Any other apps - even WAY bigger apps - don't have any problems installing.
Sent from my "SGH-I897" using xda premium
joshlevinson said:
Thanks...I was asking more to see if I could help, not to bug for an ETA.
Not sure if anyone else has seen this problem, but I'm unable to install Titanium Backup. Error comes up mid install and says that there is not enough free space. However, this is on a FRESH install (wiped everything) and is the first app I tried to install. Any other apps - even WAY bigger apps - don't have any problems installing.
Sent from my "SGH-I897" using xda premium
Click to expand...
Click to collapse
Try getting a different version and install that. Or reboot and try to install? some of those problems are hard to do because they dont reproduce very well.
And I have absoulutely NO idea whats causing the market problem. I spent almost 2 hours last night going through the /system folder and changing my vending/phonesky.apk and my fingerprint. still a server error. Its probably the first on our list for fixing.
I've also uploaded the second zip again, now just pick the one with the highest number. It's a no-wipe if coming from any previous captivate versions of MyUI. (seeing as there's only one, but more to come.)
sepherian said:
Try getting a different version and install that. Or reboot and try to install? some of those problems are hard to do because they dont reproduce very well.
And I have absoulutely NO idea whats causing the market problem. I spent almost 2 hours last night going through the /system folder and changing my vending/phonesky.apk and my fingerprint. still a server error. Its probably the first on our list for fixing.
I've also uploaded the second zip again, now just pick the one with the highest number. It's a no-wipe if coming from any previous captivate versions of MyUI. (seeing as there's only one, but more to come.)
Click to expand...
Click to collapse
Hmm...anything in logcat?
joshlevinson said:
Hmm...anything in logcat?
Click to expand...
Click to collapse
here's a logcat if anyone wants to see.
Code:
E/Volley ( 1954): [209] BasicNetwork.performRequest: Unexpected response code 400 for https://android.clients.google.com/vending/api/ApiRequest
D/Finsky ( 1954): [1] 3.onErrorResponse: Metadata failed: com.android.volley.ServerError
D/Finsky ( 1954): [1] 9.onClick: b/5160617: Reinitialize account [EOSrz8_UW1XITvzdbh512For8vc] on retry button click
Clock force closes when you enable any alarm.
Sent from my "SGH-I897" using xda premium

[ROM - 5.3] ALPHA DIRTY-BEAN 4.1.X - Team DRH (Update 08/23/12)

(based on 2.6.39 kernel)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CLICK PIC FOR TEAM HOMEPAGE​
TeamDRH (Dirty Reset Hole) presents the first public alpha for Android 4.1.X (Jelly Bean).
DISCLAIMER
Attention commuters of the intertubes! The group of individuals known as Team DRH take absolutely NO RESPONSIBILITY for any DAMAGE that YOU cause to YOUR device! This "labor of love" we call and Android ROM comes AS IS and is not an official release by any means. If you have not already SOILED your device by flashing a custom ROM then to do so will VOID any WARRANTY you may have left. Team DRH and its affiliates are not responsible if your G-Tablet does any of the following: Explodes, Flies off to space to battle the Flying Spaghetti Monster, Is generally awesome, solves world hunger or explodes... again. (OK We take responsibility for you Tablet becoming Awesomesauce.) So in essence... Flash this totally rad ROM at your own RISK and prepare to Spontaneously Combust with AWESOMENESS!
HOW TO INSTALL
Download the following file <--- Seriously don't skip this step unless you are 100% positive that you have a 350M system partition (md5: 256a4bf1da503f4a1ec1f998a00a05f2)
Boot tablet into APX mode by holding volume down and power for about 6 seconds
Plug tablet into computer
NVFLASH the above following the instructions that are included for Windows/Linux users
Turn tablet back on (it will boot into recovery)
Partition Internal SD Card (2048M/0)
Enable USB connection and copy DRH ROM onto internal/external sdcard
Flash ROM that was copied over
Enjoy!
The ROM's system folder was very close to the max size our system partition could handle on the G-Tablet and with any bad blocks, it was more than the G-Tablet could handle and installing GApps made it even worse. In this release the system size has increased from 200MB (stock gtab) to 350MB. Since Jellybean is so large in size this is needed. The cache directory has been syslinked to the internal sdcard as to save space on the NAND. This is the same setup that ICS 1.3.2 had.
WHAT WORKS
WIFI
Hardware Acceleration
Sleep
WiFi
Bluetooth
Sensors
Sound
USB/MTP (If you plug in USB while your tablet is asleep you will have a SOD)
Capacitive Buttons
Hardware Buttons
USB Flash Drives
Proper SD Card Mounts
HD Videos
Dock
More to come...
WHAT'S NOT WORKING
Camera
Microphone (Works but drops after 6-8secs)
Possible ROM Slowdowns
HDMI Audio
Version Info:
This build of JB will be starting at Alpha 5.0. Reason being in the ICS ROM version's 1.x interfered with bootloader version and Android version. We are trying to get away from that mess so we just decided to jump to 5.0. 5.0 is basically the equivalent to 1.0.
Final Thoughts:
This build has been tested and running on some "unbootable" tablets. This is not a guarantee this ROM will work on your tablet. Also this ROM is still going through the testing phase so there is most likely to be bugs. Finally, I have mentioned quite a bit about the 3.1 kernel. Right now this ROM is still running on the .39 kernel. This will change in the near future. We are still ironing out kinks in the 3.1 kernel and it is not ready for public consumption yet.
If you like this project and appreciate the extreme amount of time that the devs put into this please donate:
Donate to TeamDRH: LINK
Other Credits:
This ROM would not happen without all the brilliant minds behind the CM10 project.
Reserved for ROM tweaks and tricks... will be updated later.
Changelog:
(8/23/2012)TeamDRH-JB-Alpha-5.3.zip
Updated Kernel
MinFree and oom killer tweaks
Added external USB Webcam Support (Does not work with all webcams)
Updated CM10 Base (With latest code)
Added ZRAM
Changed to SuperSU
(8/15/2012)TeamDRH-JB-Alpha-5.2.zip
Fixed SD card permissions, this fixes sideloading errors
(8/14/2012)TeamDRH-JB-Alpha-5.1.zip
Updated Kernel
Fixed Market issue
Added DRH branding
Updated CM10 Base (With latest code)
(8/14/2012)
Updated DRH-Preinstall file.
New install method; no longer needs TnT to start up
Includes new ClockworkMod 6.0.1.1 TeamDRH Touch Recovery Beta 1!!!
(8/13/2012)TeamDRH-JB-Alpha-5.0.zip
Android 4.1.1 Jellybean!!!
Moved Cache to internal SD
Cleaned up init.rc
Added Gapps
Added Installer
Added Bootsound option (not functional just yet)
Kernel Updated
CM10 Base (With latest code)
Niceee I'm downloading this one now . I feel like I just got the tablet settle from the last flash. .
#2 :thumbup:
edit* maybe not where the heck is the rom link?
sent from my computer i never use,
cause i l0ve my tablet!!!
JEZZEJAMEZ said:
Niceee I'm downloading this one now . I feel like I just got the tablet settle from the last flash. .
#2 :thumbup:
edit* maybe not where the heck is the rom link?
sent from my computer i never use,
cause i l0ve my tablet!!!
Click to expand...
Click to collapse
Click the download image?
Thanks you kind sir . I found it I'm in boot up now I'm going to let it settle I will report back. I'm geeked I've been waiting for this . :thumbup:
Edit I was trying to DL it from xda app. Lol
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
---------- Post added at 04:09 PM ---------- Previous post was at 03:56 PM -------
I'm trying to update apps with play store. Its giving me a error with updates and DL. Any clue
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
JEZZEJAMEZ said:
Thanks you kind sir . I found it I'm in boot up now I'm going to let it settle I will report back. I'm geeked I've been waiting for this . :thumbup:
Edit I was trying to DL it from xda app. Lol
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
---------- Post added at 04:09 PM ---------- Previous post was at 03:56 PM -------
I'm trying to update apps with play store. Its giving me a error with updates and DL. Any clue
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
What is the error? Also make sure you have followed the install tutorial. The tablet has to be nvflashed since ICS.
Yes I nvflashed, I can again... everything else seams to be ok..
Error, retrieving information from server
Edit * I have nvflashed again and re flashed rom. Still getting error maybe permission?
Should I flash 5.0 then 2 then 3?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
JEZZEJAMEZ said:
Yes I nvflashed, I can again... everything else seams to be ok..
Error, retrieving information from server
Edit * I have nvflashed again and re flashed rom. Still getting error maybe permission?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
After the NVFLASH did you partition sdcard? If not its still grabbing info from previous roms.
fosser2 said:
After the NVFLASH did you partition sdcard? If not its still grabbing info from previous roms.
Click to expand...
Click to collapse
Yes. I might have a bad download ill try it fresh again.
Bingo got it
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
I've got a Nexus 7 now and gave my gtab to my mom. Will surely keep an eye on this and will certainly flash it the. Minute it reaches Beta
I wanna say this though, this tab would be NOTHING without your work guys, seriously. You're amazing and as usual, thank you
Sent from my Nexus 7 using Tapatalk 2
It respond s great Most the time. I I will use it for a day.
Thanks for the hard work
Sent from my Malata SMBA1002 using xda app-developers app
1.1 BL
Anyone tried this rom with 1.1 BL? Currently running DRH ICS that way. Only way I could get rom to load. Wondering how nvflashing to 350mb will affect me.
Thanks to the drh team.
I would like to ask how is the rom performance as compared to other ics roms? Why is this still called alpha when things equal to ics roms work?
Sent from my Malata SMBA1002 using Tapatalk
Just wanted to say thank you to Team DRH. This build installed flawlessly on my G-Tab and it works great. Haven't tried the camera yet (listed as non-working anyway), but everything else is working without a hitch.
Good job Team DRH, its teams like you who keep our faith in the tablet even though the manufacturer's have abandoned it. Just out of curiosity, does this rom fix the battery drain issue that seems to occur on every 2.2 rom? I havent the chance to test this out yet, but would be keen to if the current drain is atleast slowed
How to male Play market working with this rom?
Potimto said:
Good job Team DRH, its teams like you who keep our faith in the tablet even though the manufacturer's have abandoned it. Just out of curiosity, does this rom fix the battery drain issue that seems to occur on every 2.2 rom? I havent the chance to test this out yet, but would be keen to if the current drain is atleast slowed
Click to expand...
Click to collapse
I have had it installed for several days now and can tell you that the battery life seems great. I've had my daughter playing on it for several hours and then I played a fairly intensive game (Major Mayhem) for about an hour and when I checked the battery after that it still said I had about 60% left.
lulonen said:
How to male Play market working with this rom?
Click to expand...
Click to collapse
Follow the instructions to flash the gapps package. I had to do it twice for some reason. After that, you'll have a Market app that once you launch it will eventually upgrade itself to the Play Store.
jheiselman said:
I have had it installed for several days now and can tell you that the battery life seems great. I've had my daughter playing on it for several hours and then I played a fairly intensive game (Major Mayhem) for about an hour and when I checked the battery after that it still said I had about 60% left.
Click to expand...
Click to collapse
Thanks, I should have worded it better hehe I meant the standby battery drain. If you put the tab on standby does it still drain 20+% overnight?
Rom has been working great. Its fast and smoother than ICS but I can't get adobe flash to install from the market or see it it says its not compatible.

(BL1.2ROM-AOSP)SmOoTh_IcE 4.0.4(G-tablet Only)(Updated 09/22/12

Disclaimer
I do not take responsibility for anything that happens to your stuff
If you load this it is your responsibility to fix if things go wrong
If your walls start bleeding and your animals start dancing on the ceiling
Then you have something else wrong and it I can not help you :cyclops:
For starters I am not a Developer, I am not a Themer, but what I am is not important.
This is something that I have been working on for the past 2 weeks. Didn't want to
release it until I knew others can handle it. This is G-Harmony4.0.4 broken down on
Crack. Fully Deodexed with Modded scripts to Match. After Installation and setup is
complete let it rest for 10 - 15 minutes to allow the Dalvic to build. After that hold on
with both hands and enjoy the ride. Sorry this only comes as a 160 lcd, but can be
by changing the build prop.
I want to thank tjohnsonjr for bring us [ROM-AOSP][BL-1.2]G-Harmony ICS 4.0.4 ODEXed
so I can rip it apart and bring you this amateur build
Also Special Thanks goes to fosser2 for helping me out with some initial issues, and bring us
to the ICS and Jelly Bean Stages
Just when you think it couldn't get much better then this
Then I update and it just keeps getting better
This one will keep going all night long
Now I bring you SmOoTh_IcE 4.0.4 (deodexed)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NEW
Installation Instruction.
You must be on BL 1.2 and have a 250mb System partition with CWM ver. 5.5.0.4
You must now how to back up your existing system. That is only being said once
Boot into Recovery and do a Nandroid Backup
Wipe data/factory reset
Partition Internal SD to 4096/0 in Advance settings A MUST
Download Rom and Place on internal storage
Install Package
My Update Script will do the rest
Complete initial setup
No more waiting update the Crap out of everything
Apps included
Gapps
Gmail
Root Browser (removed)
ES File Browser (More User Friendly)
Apollo Player
Adobe Flash Player
Chrome Browser
Google Maps
No-Frills CPU Control
Power Toggles
Screenshot ER
SuperUser
Terminal Emulator
You Tube
If you want any thing else you will have to wait and go get them
Version 1.3 is pre-Charged so you don't really need it, but I left it in there
V6SuperCharger is still included if you want it
Instructions.
1. Open Terminal Emulator
2. Type: su and then click "ALLOW" on the SuperUser pop up
3. Type: cd system/xbin
4. Type: sh V6SuperCharger.sh
5. Follow the prompts
What Doesn't Work
Camera
Mic
PC USB Mount Alternative is to use CWR or a USB Drive
Updated SmOoTh IcE version 1.4
Whats Different see 2nd post.
ROM download here.
http://d-h.st/enO
Link for NVFlash package to set System to 250m
http://teamdrh.com/DRH-Downloads/Full_Stock_NVFlash_CWM_5504_Touch.zip
I don't normally do this stuff, So I will try to keep it updated as much as I can. Also the dropbox link might cause issues.
Hope someone can support a mirror link.
If you like my work just press the Thanks button
If you really like my MODS, Buy my wife a Kindle book so I can keep working on this,*
https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=csmccall99%40yahoo%2ecom&lc=US&currency_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted
reserved for later use
Changelog
Changed boot.img from DRH 1.3.2 to 1.3
Everything should work allot better. Sorry for not catching that.
09/19/12
Changelog
Updated Build prop. for speed and BUTTA
Added Root Browser in place of File Browser (WHY, BECAUSE WE ARE ROOT DUHH)
Changed around some scripts in /etc/int.d for better performance
Fixed Brightness YAAAAA It works
Let it rest after install and setup (Remember Do Not Restore with Google) update Superuser through Play Store then update Bianary through app. Give it a reboot and try to keep recent app drawer cleaned out. Thanks in Advanced.
09/22/12
Changelog
Changed out once again some int.d scripts
Changed boot.img to current one off of DRH JB
Activated and tweaked Swap (If you don't know, better google it)
Sprinkled on some BUTTA for Flavor
Can't wait to try it, thanks for keeping the gtab going :thumbup:
Sent from my DROID RAZR using xda premium
Yeahhhhh. Thanks im on it now. Dl time.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
So far nice and smooth. Like the speed but play store is not allowing me to download apps. It just continues to say downloading. I cleared cache for the app store still no go. Hmmmm
Sent from my Malata SMBA1002 using xda app-developers app
shawngrm said:
So far nice and smooth. Like the speed but play store is not allowing me to download apps. It just continues to say downloading. I cleared cache for the app store still no go. Hmmmm
Sent from my Malata SMBA1002 using xda app-developers app
Click to expand...
Click to collapse
Yeah it does that if you don't let it rest for the whole 10 to 15 min. Some devices might react different. Maybe needing a longer cool off period. I am running this along with everyone that does so I can try to duplicate issues as they come in if any and try to resolve them.
Edit : Updated OP
Yea I let it sit a little longer and it works fine now,the play store that is. It has started to lag in chrome a lot can't figure that one out.
Sent from my Malata SMBA1002 using xda app-developers app
lag might have to do with files left in the init.d folder...if you aren't using supercharger, I suggest removing files from the folder and rebooting.
Naddict said:
lag might have to do with files left in the init.d folder...if you aren't using supercharger, I suggest removing files from the folder and rebooting.
Click to expand...
Click to collapse
I am going to add this to the initial setup of the device after replacing the stock file manager with one that can be used to do it. Thank you for some insight. Does any one have a well place script that can be added to automatically do this?
I'm am using the superc. It has slowly started to speed up but not by much. Where is the file init.d located?
Sent from my Malata SMBA1002 using xda app-developers app
cam and mic
Do the camera and microphone work in this build? Also does this freeze up if it goes to sleep while plugged invisible USB?
ROM looks good. Great job
Sent from my SPH-L710 using xda premium
shawngrm said:
I'm am using the superc. It has slowly started to speed up but not by much. Where is the file init.d located?
Sent from my Malata SMBA1002 using xda app-developers app
Click to expand...
Click to collapse
in the etc folder
tjohnsonjr said:
ROM looks good. Great job
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Got something else cooking in the Kitchen but needs more time to settle. Thanks.
herculese1 said:
Do the camera and microphone work in this build? Also does this freeze up if it goes to sleep while plugged invisible USB?
Click to expand...
Click to collapse
Like all the ICS Builds for the Gtab we are using the Kernel off of Team DRH's build made by fosser2 and others. Once they get the kernel perfected there will be no Camera. This has Kernel base 1.3 I took the build with 1.3.2 off line. To the Sleep of Death issue Yes there is always that chance of it happening. Just beware of what you are doing and also word of advise change your display sleep setting to max.
nobe1976 said:
Like all the ICS Builds for the Gtab we are using the Kernel off of Team DRH's build made by fosser2 and others. Once they get the kernel perfected there will be no Camera. This has Kernel base 1.3 I took the build with 1.3.2 off line. To the Sleep of Death issue Yes there is always that chance of it happening. Just beware of what you are doing and also word of advise change your display sleep setting to max.
Click to expand...
Click to collapse
Is this speedier than G Harmony? I love it, with the exception of Email Speed and some internet Lag.
OK, I will be the guy to ask...If already on the latest G-harmony ICS, would a cache and Dalvik flush be enough when flashing this?
dsrhokie said:
OK, I will be the guy to ask...If already on the latest G-harmony ICS, would a cache and Dalvik flush be enough when flashing this?
Click to expand...
Click to collapse
Should be able to since this is just a Deodexed version of G-Harmony. I would still make a nandroid bakup in recovery just in case things go wrong. Try it out.
jlh11364 said:
Is this speedier than G Harmony? I love it, with the exception of Email Speed and some internet Lag.
Click to expand...
Click to collapse
It has some extra tweaks and more to come when finished with ver1.3.
nobe1976 said:
It has some extra tweaks and more to come when finished with ver1.3.
Click to expand...
Click to collapse
Great, I will look for it. Thanks for the work.

[ROM][CM7.2][FireKernel]ElegantPerformer V2 By Adwait| Based on Official CM 1/1/2013

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello,
Wish you and your family a very Happy New Year!​
You may know that I have already published ElegantPerformer on Xda. You can check it here: http://forum.xda-developers.com/showthread.php?t=1709879.
Now I am going to introduce it's 2nd version. In looks, both are identical but you can feel the difference while handling. I have used a lot of ROMs from here and I really loved each of them, but mostly I found my phone buggy after using them for more than a week. I actually stopped working on ROM due to my exams but I have to make one for myself. Which must be stable, fast without OC, smooth like butter and beautiful. So I am introducing another version of my work ElegantPerformer V2 by Adwait.
================================================================================================
Screenshots:
Battery stats after 9 hours of use. Sorry for night mode Screenshot Will upload again after sometime.
================================================================================================
Features:
- Nothing fancy. No live wallpaper, bootanimation.
- Just 80 mb size.
- Based on latest CM7.2 source (Published by CM team on 1/1/2013)
- Fire Kernel OC
- New Holo launcher
- Battery monster (I mean it !! )
- Google Play Store 3.10.10
- Toggle torch
- FM radio
- Beats audio engine + Alsa + AudioFXwidget
- MixZing player for better performance.
- Devanagari /Hindi /Marathi/ almost all Indian language font support to read webpages, sms in your language (Partial rendering)
- Working wifi,USB tethering.
- and lots of more..... (I'm bit lazy lol!!! )
================================================================================================
Credits:
-CM team
-dragonnn for his awesome fire Kernel
-Prash for his Blue Abids theme
-Lovetz for Beats audio engine + Alsa + AudioFXwidget
And all of those who are directly or indirectly contributed to this ROM. Please forgive me if I missed anyone.
================================================================================================
How to install :
Boot in recovery CWM 5
Wipe data/factory reset
Wipe cache
Advanced>>Wipe dalvik cache
Choose 'Install zip from sd card'
Choose the file 'ElegantPerformer_V2_By_Adwait.zip '
Reboot after the flashing completes. 1st reboot may take 3-4 minutes. After 1st reboot and setting account, 2nd boot is recommended.
================================================================================================
Download:
http://forum.xda-developers.com/showpost.php?p=36267941&postcount=34
================================================================================================
Few words from me:
I tried my best to keep the ROM away from bugs. Only one thing you may need to do is updating superuser binary. It will update by itself, just allow it to do so.I hope you like this ROM. Those who are already satisfied with your current ROM, just make a backup of the current ROM and then TRY this ROM. I am sure you will love this! Let me know if you find any trouble using it. If you like this ROM just press "Thanks" this will tell me how many of you loved this ROM.
You can also make this banner as your Signature. Here is the code:
PHP:
[CENTER][IMG]http://www.freeimagehosting.net/newuploads/54lsf.jpg[/IMG][/CENTER]
Regards,
Adwait
http://www.adwaitk007.info
reserved!
Dude, when you release a different version of the SAME rom it HAS TO BE ON THE SAME THREAD.
Otherwise the Ace Development Forums would be filled with a trillion different threads.
SuperAce609 said:
Dude, when you release a different version of the SAME rom it HAS TO BE ON THE SAME THREAD.
Otherwise the Ace Development Forums would be filled with a trillion different threads. Who else have you seen doing this?
Click to expand...
Click to collapse
Hey dude, It's look wise same But if the main source is itself changed then I think starting new thread is best choice. I know the rules but my 1st version was based on vo-1's odexed and this one is based on CM7.2's original nightly published on 1/1/2013. So I have to make a new thread! And I think I should! what say?
Edit: And also the Fire Kernel used in this ROM is OC. In v1 it was not an OC.
Did ur rom supports Tamil language? This version is deodexed?
Sent from my GT-S5830 using xda app-developers app
adwaitk007 said:
Hey dude, It's look wise same But if the main source is itself changed then I think starting new thread is best choice. I know the rules but my 1st version was based on vo-1's odexed and this one is based on CM7.2's original nightly published on 1/1/2013. So I have to make a new thread! And I think I should! what say?
Edit: And also the Fire Kernel used in this ROM is OC. In v1 it was not an OC.
Click to expand...
Click to collapse
Nope.
It should still be an update to the other thread.
As long as your rom has the same name you cant create a new thread. Be it a change in kernel or base rom itself
Sent from my GT-I9300 using xda premium
drganbds said:
Did ur rom supports Tamil language? This version is deodexed?
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Yes! but it will be a partial support. It will not render font 100% but it can be read.
masterex567 said:
Nope.
It should still be an update to the other thread.
As long as your rom has the same name you cant create a new thread. Be it a change in kernel or base rom itself
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
no! I don't think so!
Any reason you didn't include AdrenalineEngine ?
However, I'm going to test your rom for the next few days.
Thanks
melltuga said:
Any reason you didn't include AdrenalineEngine ?
However, I'm going to test your rom for the next few days.
Thanks
Click to expand...
Click to collapse
Is that mandatory? I never used it. And to keep this ROM lightweight I have to skip additions which can be added later. I am glad you would like to try this ROM. I will wait to get feedback from your side!
Regards,
Adwait
Of course you don't HAVE to use AdrenalineEngine, I just never had the feeling that it would do any damage to integrate it
1) On first boot I could not enter my PIN, all I could do was take out the battery and restart.
2) With every restart I get an error-message, something about bluetooth (I don't know if this important, I don't think it has any effect on the rest of the phone)
3) Whenever I want to go into the synchronisation-settings (I hope thats what its called in english) the phone reboots. (I think this might be a CM 7.2 Nightly error, and not your fault )
For now I have the feeling that it runs very smooth, and I like the way it looks.
Will test it for a few more days and maybe stick to it
melltuga said:
Of course you don't HAVE to use AdrenalineEngine, I just never had the feeling that it would do any damage to integrate it
1) On first boot I could not enter my PIN, all I could do was take out the battery and restart.
2) With every restart I get an error-message, something about bluetooth (I don't know if this important, I don't think it has any effect on the rest of the phone)
3) Whenever I want to go into the synchronisation-settings (I hope thats what its called in english) the phone reboots. (I think this might be a CM 7.2 Nightly error, and not your fault )
For now I have the feeling that it runs very smooth, and I like the way it looks.
Will test it for a few more days and maybe stick to it
Click to expand...
Click to collapse
Hello,
Did you cleared cache, dlavik cache 1st? After your reply I am going to test my ROM again but the errors you mentioned are completly new! They shouldn't be there. And I flashed my ROM almost 6 times during testing. So please make sure you have CWM5 or more, all data wiped, cache wiped, dalvik cache wiped!
Edit:
I just successfully flashed ROM. No error message about Bluetooth or anything found! Safely navigated through each part of settings without any reboot. USB tethering also works fine!
So I strongly recommend you to follow these steps:
Boot in recovery CWM 5
Wipe data/factory reset
Wipe cache
Advanced>>Wipe dalvik cache
Choose 'Install zip from sd card'
Choose the file 'ElegantPerformer_V2_By_Adwait.zip '
Of course, CWM5 and did exactly as you said in your first post. Never had these problems before, but since your ROM is based on such a new version of CM7, I think it might be because of that. But I don't know, I'm not a developer or anything
melltuga said:
Of course you don't HAVE to use AdrenalineEngine, I just never had the feeling that it would do any damage to integrate it
1) On first boot I could not enter my PIN, all I could do was take out the battery and restart.
2) With every restart I get an error-message, something about bluetooth (I don't know if this important, I don't think it has any effect on the rest of the phone)
3) Whenever I want to go into the synchronisation-settings (I hope thats what its called in english) the phone reboots. (I think this might be a CM 7.2 Nightly error, and not your fault )
For now I have the feeling that it runs very smooth, and I like the way it looks.
Will test it for a few more days and maybe stick to it
Click to expand...
Click to collapse
melltuga said:
Of course, CWM5 and did exactly as you said in your first post. Never had these problems before, but since your ROM is based on such a new version of CM7, I think it might be because of that. But I don't know, I'm not a developer or anything
Click to expand...
Click to collapse
Sorry but you are doing something wrong I guess! Retry if you are okay with it. This time don't forget to wipe things
And let me know the result!
Hi thanks for the ROM it looks nice may I ask you if theres any chance of you making another version with PSN's Memory MOD..? I find it much more stable and better than using S2E or link2SD or almost anything else.. Thanks in advance.
saruboy said:
Hi thanks for the ROM it looks nice may I ask you if theres any chance of you making another version with PSN's Memory MOD..? I find it much more stable and better than using S2E or link2SD or almost anything else.. Thanks in advance.
Click to expand...
Click to collapse
Yes! I also loved it. I will surly try my hands on it as soon as I find some time! Till then njoy ElegantPerformer v2
Downloaded & trailing :good:
Jalfrezi said:
Downloaded & trailing :good:
Click to expand...
Click to collapse
Thanks! I will wait to know your feedback!
Regards,
Adwait
Downloading for a test!
Bootloop after flashing int2ext4+ script...
Sent from my GT-S5830 using xda app-developers app
I'm in a bootloop after flashing - installed another rom and zero issues
somethings not quiet right done all the wipes etc, do you need to mount system or data ?? or do i have a bad download 80mb
I'm sure its something simple

[rom][sero7 pro][gummy][unofficial][kang]

​KANG######THIS ROM IS UNOFFICIAL######KANG
I've been builing this for a while now for personal use and I thought I would share it now that everything seems to be working. All I do is compile and upload..these are the Devs that did all the tough stuff...Thanks for making this such a great Tablet.
All Credit, Thanks & Donations need to go to these guys:
TEAM-GUMMY- https://twitter.com/TeamGummyRom
randomblame- TakTik Rom
delorespark- DOPA Rom
davepmer- CM-11
USE AT YOUR OWN RISK !!!!!!!
NOT MY FAULT IF YOU BRICK YOUR TABLET!!!!!
YADA YADA YADA!!!!
Git Hub----kernel https://github.com/bdadd34/android_kernel_hisense_m470bsa
Download GummYKanG--
3-13-14- new kernel with no oc based off of delorespark kernel source with davepmer wi-fi + full device tree including ramdisk..all deloresparks original patches for audio and charger. It doesn't have his latest bluetooth patch but i will add into next build. i will upload an oc kernel in post #2 shortly for those wanting one. Dont know about adding govs...they seem to lag pretty bad and i have yet to find any in other tegra 3 device. I'm thinking there is reason for that...so instead i will try to tweek interactive and ondemand and see how that runs.
3-29-14- new build based off delores park aosp repos and all his patches except 2nd a2dp patch which caused problems with viper4android and some bluetooth audio freeze ups. I will start weekly updates now and sometimes sooner if needed. No overclock in rom but I will upload a new basic oc kernel tomorrow.
gUmmYkAng dOwnlOAd fOldEr
Download your favorite 4.4.2 gapps-
PA Gapps http://forum.xda-developers.com/showthread.php?t=2397942
Slim Gapps http://www.slimroms.net/.../addons4-4
highly recommended
Download SuperSU http://download.chainfire.eu/382/SuperSU/UPDATE-SuperSU-v1.93.zip
Boot to recovery--use one of randomblames recoveries either one should work fine.
wipe data and format system
flash rom
flash gapps
flash superSU
Enjoy
Screen Shots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Boot.img zips
new 1.5ghz for latest rom version--oc, added sio and tcp_westwood, changed ondemand and interactive gov settings for performence.
github link now in op
gUmmYkAngOc314.zip - 8.42 MB
rom kernel
gUmmYkAng314_rom_kern.zip - 9.67 MB
here are a couple 1.3 ghz kernels built from delorespark's m470bsa source. Both with davepmer wi-fi changes..sorry no signitures yet, so disable check in recovery.
PRE CHARGER FIX ONLY
stkgUmmY_nocpuQt.zip--no cpu quiet, no oc, very stock like.
http://d-h.st/Wzq]stkgUmmY_nocpuQt.zip - 9.56 MB
stkgUmmY_plus3-12-14boot.zip--no oc, added cpu quiet, and tcp_westwood
http://d-h.st/EYG]stkgUmmY_plus3-12-14boot.zip - 9.56 MB
pics!! =D
Moirae said:
pics!! =D
Click to expand...
Click to collapse
I'll try to post some tonight when I get home from work.
Sent from my Sero 7 Pro using Xparent Green Tapatalk 2
Good stuff man!
Thanks so much for taking the time to put this together and for sharing it. Anything not working that you know of? A2DP? HDMI?
Sent from my SAMSUNG-SGH-I747 using Tapatalk
MrSimmonsSr said:
Thanks so much for taking the time to put this together and for sharing it. Anything not working that you know of? A2DP? HDMI?
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
In the OP it says everything is working. Probably the ROM is based on Dave's device trees, that's what my public PAC build will be based on.
Sent from my Sero 7 Pro using Tapatalk
Everything I have tested has worked so far...I'm going to get an HDMI cord today so I can test that. All other video and sound works and HDMI should as well but haven't been able to test. The device tree and current kernel are based from Randomblames repo but have little bits and pieces from tf101 tf301 grouper davpmer and delorespark. I'm currently switching the kernel base to davepmers , he did a lot of work fixing the hack job hisense did on the source code. I used randomblames first because deloresparks audio fix was made for taktik and I wanted to test first with that kernel base. I have a build going now with a new gummy sync and davepmers kernel.
Also anyone else having issues uploading to dev-host I get to 100% and I hangs...tried 3 different computers at 2 separate locations same result.
Edit...
---just beamed a pic to my xt926 with NFC while Bluetooth audio was playing Pandora..?
---Any request for kernel govs or iosched ? Going to try to build a couple kerneles tonight.
Sent from my Sero 7 Pro using Xparent Green Tapatalk 2
Bdadd34 said:
Also anyone else having issues uploading to dev-host I get to 100% and I hangs...tried 3 different computers at 2 separate locations same result.
Click to expand...
Click to collapse
I'd recommend using Android File Host myself. I rarely have issues uploading ROMs on there.
Bdadd34 said:
Everything I have tested has worked so far...I'm going to get an HDMI cord today so I can test that. All other video and sound works and HDMI should as well but haven't been able to test. The device tree and current kernel are based from Randomblames repo but have little bits and pieces from tf101 tf301 grouper davpmer and delorespark. I'm currently switching the kernel base to davepmers , he did a lot of work fixing the hack job hisense did on the source code. I used randomblames first because deloresparks audio fix was made for taktik and I wanted to test first with that kernel base. I have a build going now with a new gummy sync and davepmers kernel.
Also anyone else having issues uploading to dev-host I get to 100% and I hangs...tried 3 different computers at 2 separate locations same result.
Edit...
---just beamed a pic to my xt926 with NFC while Bluetooth audio was playing Pandora..?
---Any request for kernel govs or iosched ? Going to try to build a couple kerneles tonight.
Sent from my Sero 7 Pro using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Awesome news! For CPU govs how about SmartassV2. I had a bad download and couldnt flash. Gonna try redownloading rom.
C64assembly said:
Awesome news! For CPU govs how about SmartassV2. I had a bad download and couldnt flash. Gonna try redownloading rom.
Click to expand...
Click to collapse
Im going to update in a couple hours if all goes well.
Sent from my Sero 7 Pro using Xparent Green Tapatalk 2
Bdadd34 said:
Im going to update in a couple hours if all goes well.
Sent from my Sero 7 Pro using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Fantastic. This ROM is light and really fast!
Hi, thanks for the ROM!
I flashed it last night but I can't get the wifi to work. What do I need to do? thanks..
update
New update in op dev-host and dropbox... made more wi-fi changes from davepmer device tree. still needs reboot at set up but i uploaded because last update was missing quite a few of his changes.
installed latest version yesterda. woke up this morning to a dead tablet. Plugged it in and it tried to boot but i guess not enough juice to run stuck at hisense screen. powered off and left alone for a little while. tried to boot into recovery and would only show charging splash. tried to just normally boot and wala it worked! checked battery status and says 85% android os eating the battery. anyone else notice battery drain? or is it just me?
jhienk said:
installed latest version yesterda. woke up this morning to a dead tablet. Plugged it in and it tried to boot but i guess not enough juice to run stuck at hisense screen. powered off and left alone for a little while. tried to boot into recovery and would only show charging splash. tried to just normally boot and wala it worked! checked battery status and says 85% android os eating the battery. anyone else notice battery drain? or is it just me?
Click to expand...
Click to collapse
I am having troubles booting. Sometimes i have to clear cache to boot. Also when the device locks it will not wake up.
Gotta flash when I get home! Glad to see another ROM out there for this tablet
Sent from my Sero 7 Pro using Tapatalk
Best looking and most customizable ROM to date for this tablet
C64assembly said:
I am having troubles booting. Sometimes i have to clear cache to boot. Also when the device locks it will not wake up.
Click to expand...
Click to collapse
i'm going to repost the first version for those having troubles with the last update. Ill try get it fixed tonight. i think i found the error but didn't have time before work to fix it. hopefully i can get that done and start on kernels tonight.
Sent from my Sero 7 Pro using Xparent Green Tapatalk 2
Bdadd34 said:
i'm going to repost the first version for those having troubles with the last update. Ill try get it fixed tonight. i think i found the error but didn't have time before work to fix it. hopefully i can get that done and start on kernels tonight.
Sent from my Sero 7 Pro using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Wow! That is great! I appreciate your work on this ROM! It is the slimmest and quickest ROM to date for our tablet. Thank you very much!

Categories

Resources