I have a GSS4 i9505.
it is unrooted/100% stock, as I do not wish to muck around with any of that just incase the worst happens and it needs to go back to repair again i'd feel safer knowing that its device status remains Official.
about 6 months ago it went back to optus for repair as the battery had swollen leading to problems.... when i got it back the repair slip said, replaced battery, tested phone - no issues, updated to latest firmware.....
which i thought to be weird as i thought i was on 4.2.2 already.
anyway... Optus has now finally released their version of android 4.3... except when i go into phone settings and click update.. it says i am already running the latest version... when i connect to Kies via USB it says "your devices current firmware version is not supported to update firmware via Kies"
in Kies i get
PDA:MDE - PHONE:MD8 - CSC:MD6 (OPS)
when i do *#1234# i get
AP: I9505XXUAMDE
CP: I9505DVUAMD8
CSC: I9595OPSAMD6
i have no idea what any of that means
would i be correct in assuming that since i have never mucked around with roms,etc and the only time anything like that has happened was when it went back to optus for repair.... that optus stuffed something up and that why i cant update ?
If you are sure to be fully stock and unrooted, then maybe kies is gone crazy.
You can manually update your phone by using odin and the last official firmware available on sammobile. (I see that for Australia(Optus) it's the 4.3 MK8)
invano said:
If you are sure to be fully stock and unrooted, then maybe kies is gone crazy.
You can manually update your phone by using odin and the last official firmware available on sammobile. (I see that for Australia(Optus) it's the 4.3 MK8)
Click to expand...
Click to collapse
*NOTICE TO OP
Using this method will trigger KNOX warranty void
cheers.... i had thought of odin but as mentioned about, figured that it'd probably void warranty which i would like to avoid as knowing my luck the screen would all of a sudden stop working and i'd have no way of re-official'ing it.
might just have to take it into optus and get them to update it themselves.
Hi,
i got a Samsung Galaxy Note 3 with Android 4.3 currently installed.
I would like to update it to 4.4.2 but i have several questions before i want to take the risk of updating the device.
As a german user i downloaded this firmware file from sammobile.com:
N9005XXUENB4_N9005DBTENB1_N9005XXUENB1_HOME.tar.md5
This should be the german unbranded 4.4.2 firmware file for the Note 3 N9005.
After reading a few tutorials i saw some people who have problems while flashing this Firmware, because of that i hope you can help me here.
First question:
In Odin i can select the "Phone Bootloader Update", some people are saying i have to select this or the device or it won't work properly after the flash.
Do i have to select this and what happens when i do it?
Second question:
A lot of people also have problems while flashing this firmware because of a missing .pit file (-> http://forum.xda-developers.com/showthread.php?t=2664461)
So do I have to select an .pit file or not?
I really, really hope you can help me with that because Google couldn't help me at all so far.
Geicher said:
I would like to update it to 4.4.2
Click to expand...
Click to collapse
I am actually trying to do the very same thing
The thing is: if you didn't already get an update OTA / via kies (since samsung rolled out kitkat in germany a few days ago) chances are, you are not having a german phone, like myself.
so please enter *#1234# into the dialer app and post the results
also, it would be nice to know your country/product code: if you happen to have the box the phone came in, check the label where your imei and gsm frequencies are mentioned.
There, you'll find a string like "SM-N9005ZKEROM" which (in my case) means a black note 3 from romania
or hook it up with kies and tell the last three characters between the brackets in your firmware version
to your first question: uncheck it. AFAIK, if it is set, the firmware will flash a new bootloader onto your device, and in most cases you don't want that, it could mess your phone up badly. correct me if i'm wrong.
Back to the rom, which also addresses you 2nd question:
The actual problem with simply flashing the DBT rom is that the EU devices happen to be partitioned differently from the german ones, so odin will fail if you have a device with an uncompatible CSC/Product code (e.g. an east-european device), which in turn may or may not trigger knox and/or void your warranty.
i currently try to get more information on that topic.
nevertheless, pocketpc.ch provides a tutorial which mentions flashing DBT firmware along with a custom pit file, which may or may not void your warranty, but doesn't seem to trigger knox (pm me for a link or google it yourself: "Flashen der DBT-FW auf EU-Geräte")
Thank you very much for your detailed answer, as far as i know i will receive the device tomorrow. (Amazon DE order)
I will post the details as soon as i have access to them!
Hi
Picked up an S5 after years of iPhones, Which i bought from the three store in the UK.
After installing a few apps i started to get error 24 installing netflix. I didnt fancy doing a factory reset so i routed my phone to use a root browser to remove the temp files which resolved my issue (but of course i still had to do a factory reset) However i didn't realise that android confirms if its official or not and then doesn't receive OTA updates.
I'm not much into messing with releases these days so i downloaded the stock UK firmware (NCE) from sammobile and it now says official after flashing it.
However i notice that there is an OTA update out today (NC2) which i'm not getting when i check for updates (the message says latest update installed).
Is this simply a case of the update not having rolled out to everyone yet or does the update checker use the serial number of my phone to check that it should be on the H3G UK firmware rather than the stock UK firmware? Kies also states the firmware is up to date.
Thanks for any advice
Scottw1975 said:
Hi
Picked up an S5 after years of iPhones, Which i bought from the three store in the UK.
After installing a few apps i started to get error 24 installing netflix. I didnt fancy doing a factory reset so i routed my phone to use a root browser to remove the temp files which resolved my issue (but of course i still had to do a factory reset) However i didn't realise that android confirms if its official or not and then doesn't receive OTA updates.
I'm not much into messing with releases these days so i downloaded the stock UK firmware (NCE) from sammobile and it now says official after flashing it.
However i notice that there is an OTA update out today (NC2) which i'm not getting when i check for updates (the message says latest update installed).
Is this simply a case of the update not having rolled out to everyone yet or does the update checker use the serial number of my phone to check that it should be on the H3G UK firmware rather than the stock UK firmware? Kies also states the firmware is up to date.
Thanks for any advice
Click to expand...
Click to collapse
Rather than waiting for ota would I just be as well flashing the new stock uk firmware through Odin?
Hello,
I'v bought a GALAXY S5 G900F before two months, and it hasn't received the lollipop update, yet. I bought it from Saudi Arabia and now I've moved to Jordan (should that be a problem?)
I cannot wait anymore and I want to manually upgrade to Lollipop and I've got few questions.
1) Is it okay if I download a firmware for another CSC code? mine is (G900FOJV1AOA1) and in sammobile the latest downloadable firmware is 4.4.2.
2) If I root the mobile afterwards and a 5.0.1 was released OTA or via Kies, how can I get it? can I un-root to get the update then root it back?
3) Is there a way to reset the KNOX counter?
4) Are there any better websites than sammobile to download the firmware and how can I ensure if it is legit and untouched?
5) Why do different countries get the update so late? this is so irritating. why cannot Samsung just make the update available for everyone ? especially for the international unlocked versions.
Thanks in advance,
CharlesPro said:
Hello,
I'v bought a GALAXY S5 G900F before two months, and it hasn't received the lollipop update, yet. I bought it from Saudi Arabia and now I've moved to Jordan (should that be a problem?)
I cannot wait anymore and I want to manually upgrade to Lollipop and I've got few questions.
1) Is it okay if I download a firmware for another CSC code? mine is (G900FOJV1AOA1) and in sammobile the latest downloadable firmware is 4.4.2.
2) If I root the mobile afterwards and a 5.0.1 was released OTA or via Kies, how can I get it? can I un-root to get the update then root it back?
3) Is there a way to reset the KNOX counter?
4) Are there any better websites than sammobile to download the firmware and how can I ensure if it is legit and untouched?
5) Why do different countries get the update so late? this is so irritating. why cannot Samsung just make the update available for everyone ? especially for the international unlocked versions.
Thanks in advance,
Click to expand...
Click to collapse
1-yes but if you want stability for modem choose same reigon code (ex.XXU-BLABLA for russia\egypt\saudi arabia like that ... see your current firmware code and find the one with the same ... if not its no big deal its that some people say its better ... imho get the latest by samsung any area make sure its international)
2-umm no and yes ... no if u just unroot ... yes if you make a full wipe after unrooting (ofcourse with not deleting any system apps in partition :silly: )
3-until now .... no ... but its simple ... you have warrenty stay away ... u dont ... just go and screw it :laugh: :silly:
4-yes but sammobile is the best and fastest ... another site is samsung-updates ... it gives you new firmwares faster than sammobile but download speed is pathetic for ul.to and other mirror
5-i dunno for real but keep in mind that 99.999% of samsung phones which gets the updates are "russian" ones ... so if you have the russia stock rom you will be the first to get an OTA by 99.999% :fingers-crossed: :silly:
hope i helped
Hey All,
I got a Note 3 N9005, which supposedly was purchased in UAE.
Currently trying to use it in India, but, the device always says "No Service", with a crossed circle instead of network signal icon on notification bar.
Phone is on 4.2.2 with UGNH1. Below are some observations:
- Phone does NOT ask for any PIN / Unlock Code.
- In Settings > Status.. irrespective of any SIM, or no SIM.. Mobile Network Type = Unknown, Service State= Out of service, Mobile Network State=Disconnected.
- Orig CSC code is displayed as XTC from Phone Info App
- Tried to select a different CSC from CSC Select app.. it changed the boot logo but, network status.. still crossed circle
- IMEI is proper as printed below the battery
- Still i tried ChainFire's RegionLockAway. But, as expected, the method is only for MI7 / MJ1 / MJ3 JB versions. Sadly mine has already crossed and has A2 bootloader. So, no change was observed with CF RegionLockAway. Reverted the cahnges.
- Tried to flash MJ1 / MJ3 binaries from sammobile. As expected the latest bootloader won't allow to downgrade.
- Flashed Omega, but for no luck. Still no service and crossed circle icon.
- Flashed latest CyanogenMod. Though there was no Crossed Circle icon, there was an icon of network signal with zero network.
- Flashed official Lollipop verson to see if any changes.. no luck. Reverted back.
- Installed advanced network info app, network status, neighboring MSC, cells.. etc was shown as none.
No clue how to enable the device's network capabilities (all else like WiFi and other feature work as usual).
It will be a great help if you can guide me through! Please let me know if any other info is required.
Thanks a lot in advance. !!
Purchased in UAE doesn't necessarily it was a UAE phone. Phone Info Samsung from Play Store can tell you where it is from.
What I would do is...
Download the firmware from Sammobile to suit your phone. One fairly common issue is that Hong Kong or Chinese phones get sold into Europe or other markets and their PIT and other partitions are different. So first thing is to go back to scratch.
If you phone IS from where you think, make sure you have the stock firmware for that location and flash the latest version using Odin and Download mode.
Start Odin - v3.09 is best.
To enter DL mode for anything to do with BL or Modem you MUST turn phone off. It is best to remove the battery and wait a while, then put it in and use the Power On+Vol-Down+Home key to get into DL mode, then [plug phone into PC and wait for Odin to notice it is there.
(if Odin doesn't notice it, get the latest Samsung USB drivers for the phone and install them with phone unplugged, then plug in phone and Windows should give a pop-up)
Click on AP in Odin and navigate to where you saved the firmware - note you DL'd a zip but you need the md5 file so use 7zip to unpack the zip.
Click on the md5 file and wait for it to load into Odin.
* [Auto Reboot] and [F.Reset Time] should be the ONLY things ticked.
Click [Start] and wait.
Let phone restart and set it up with your details. Once done see if you have network.
Journyman16 said:
Purchased in UAE doesn't necessarily it was a UAE phone. Phone Info Samsung from Play Store can tell you where it is from.
......
Let phone restart and set it up with your details. Once done see if you have network.
Click to expand...
Click to collapse
Thanks Journyman16 for the quickreply.
I installed the "Phone Info Samsung" app as you mentioned and found the phone's CSC code is XTC! (= Philippines (Open Line))!!
Thanks for the hint. I will download the latest firmware from sammobile for n98005 for XTC and check. Will be back with updates in some time.
maesiva said:
Thanks Journyman16 for the quickreply.
I installed the "Phone Info Samsung" app as you mentioned and found the phone's CSC code is XTC! (= Philippines (Open Line))!!
Thanks for the hint. I will download the latest firmware from sammobile for n98005 for XTC and check. Will be back with updates in some time.
Click to expand...
Click to collapse
Update:
Flashed below 3 stock firmwares from sammobile, each time cleared cache and factory wipe.. still the crossed circle is hopelessly adamant and persistent.
4.4.2 N9005XXUGNH1
4.4.2 N9005XXUGNI4
4.3 N9005XXUDMJ7 (failed to flash, i guess due to current bootloader version A3)
I tried with Odin 3.09.3 & 3.10.6 & 3.07 .... same result.
Any suggestions? please share.. I'm ok to soft brick the phone Recovered from boot loop few times
Any further suggestions? Please share.. Shall i give a try with full wipe (/system/ folder wipe) with TWRP ? Or any other thing ?!
Tried a different sim card ??
Checked APN settings .
Checked you have modem/ baseband via settings .
maesiva said:
Update:
Any suggestions? please share.. I'm ok to soft brick the phone Recovered from boot loop few times
Any further suggestions? Please share.. Shall i give a try with full wipe (/system/ folder wipe) with TWRP ? Or any other thing ?!
Click to expand...
Click to collapse
They are old stock ROMs - how sure are you the phone wasn't updated to the new version of BL? I'm not sure if you're on the new version and then try to downgrade it, which version you will see in Phone Info but check it. There's also a phone # code to use that returns the basics for the phone, but I can't recall if you said you get calls or not and I'm heading for bed. Think the code is something like *#12334#* - google for secret smartphone codes.
JJEgan said:
Tried a different sim card ??
Checked APN settings .
Checked you have modem/ baseband via settings .
Click to expand...
Click to collapse
Hi JJEgan, thanks for your suggestions..
I tried with different SIM, yet no luck.
APN settings.. shows my SIM operator's default settings.
When I search networks Manually.. it searches for a ~10 seconds and returns without any list/error.
Select automatically shows "Automatic registration.." progress continuously for > 5 mins.. i closed manually.
Attached screenshot of Baseband, Modem, CSC versions.
AP: UGNH1
CP: UGNH1
CSC: BGNH1
Baseband: UGNH1
Kernel: 3.4.0-1955971
Journyman16 said:
They are old stock ROMs - how sure are you the phone wasn't updated to the new version of BL? I'm not sure if you're on the new version and then try to downgrade it, which version you will see in Phone Info but check it. There's also a phone # code to use that returns the basics for the phone, but I can't recall if you said you get calls or not and I'm heading for bed. Think the code is something like *#12334#* - google for secret smartphone codes.
Click to expand...
Click to collapse
Yea Journyman16, they seem to be still good old of 4.4.2. Latest must be 5.0. On samobile, for XTC i could see only till 4.4.2. Maybe for this phone version, there are no updates? Not sure.
And, yes, sadly BL is updated to A3. Which I could see in Recovery mode's REV line. (if it was A1, I could have flashed MI7 and tried RegionLockAway.. )
*#1234# gives the below info:
AP: UGNH1
CP: UGNH1
CSC: BGNH1
Any heads up ?!
/system/csc/GLB/system/csc/customer.xml has a line:
<NbNetworkLock>1</NbNetworkLock>
Which ChainFire's RegionLockAway changes to
<NbNetworkLock>0</NbNetworkLock>.. but as mentioned in it's details, the method is compatible only with MI7, MJ1, MJ3 firmwares and i'm on UGNH1 and unable to downgrade
Chainfire said:
Sammy, in their never-ending quest to make sure they've pissed off every single one of their customers at least once, have decided to region lock their latest model devices.
...
Compatible devices
- Galaxy Note 3 SM-N9005 (MI7, MJ1, MJ3 firmwares)
...
Click to expand...
Click to collapse
Any method to downgrade the BL to A1 would help !?
Attached adb logs, if of any use to analyze.
aeroplaemodeoffon.log
boot.log
networksearch.log
shutdown.log
maesiva said:
Attached adb logs, if of any use to analyze.
aeroplaemodeoffon.log
boot.log
networksearch.log
shutdown.log
Click to expand...
Click to collapse
I'd upgrade rather than try to get around the downgrade issues. What Region do you WANT to have? European ones seem to get early release of upgrades - e.g. many LP ROMs are based around the Polish release.
I don't know enough to interpret logs, but my thought would be to find a non-Philippines version (one of the Europe ones perhaps) and find a PIT file for that one. Then go read up on how to safely flash a new PIT. Then flash your preferred firmware and follow the root process etc.
I started with a HK version of S3 - every time I tried to flash a new ROM it failed and bricked my phone. Eventually I found that the PIT file on most Asian phones was different and I flashed PIT, then stock FW for the region I wanted then re-rooted and flashed the custom ROM.
Read many time, flash once, OK? I do not make bricks, nor need them, so I will not accept them delivered to my door...
Journyman16 said:
Read many time, flash once, OK? I do not make bricks, nor need them, so I will not accept them delivered to my door...
Click to expand...
Click to collapse
good one
maesiva said:
good one
Click to expand...
Click to collapse
There's a Euro PIT on the link at This Post - I checked and the dropbox is still valid. It's 4.4.2 so could be just what you need.
Now you probably want an India ROM but I haven't any links for that 0 there's a thread for India users though I think.
What I think might be happening is that different countries use different frequencies and formats for signal. It might be that India's set up simply doesn't work with the modem you've been using and the India ROM will not set up with the Asian PIT set up etc.
But read up on the process first, OK? The more you know about it the better chance you have to recover from anything going wrong.
Also, I presume from your OP that the phone NEVER worked once you got it? Do you know for a fact it worked prior to that? Maybe you're chasing solutions for a faulty hardware issue?
Journyman16 said:
There's a Euro PIT on the link at This Post - I checked and the dropbox is still valid. It's 4.4.2 so could be just what you need.
....
Also, I presume from your OP that the phone NEVER worked once you got it? Do you know for a fact it worked prior to that? Maybe you're chasing solutions for a faulty hardware issue?
Click to expand...
Click to collapse
Hi Journyman16, thanks for the suggestions.. i tried the pit file you referred, but, still no luck. And, if i'm not wrong pit file is all about allocating ROM space for /system & /dbdata and has nothing to deal with the antenna/telephony module, please correct if i'm not right.
About the phone's status yea you're right. It never worked after i received it. But, it was working usually in UAE, as per the info i got. Maybe.. as you suspected.. it might be faulty hardware too.. I don't know.. just exploring the options.. to conclude something..
maesiva said:
And, yes, sadly BL is updated to A3. Which I could see in Recovery mode's REV line. (if it was A1, I could have flashed MI7 and tried RegionLockAway.. )
*#1234# gives the below info:
AP: UGNH1
CP: UGNH1
CSC: BGNH1
Any heads up ?!
Click to expand...
Click to collapse
The only unbranded NH1's seem to be Greece or Netherlands. Netherlands has a 5.0 - maybe DL that and flash in Odin? Greece has a v5.0 but it's branded with (EUR) so I don't know if that's a company or general... I'd go the Netherlands one.
Other than that, I'm not sure - might be time to get the phone checked properly?
Finally.. could trace the root cause.. antenna / receiver chip malfunction. So, it was an hardware issue that had to be replaced at a cost at service center.
Summary: If network icon is crossed circle, its not a good sign !! Thanks
Journyman16 said:
Journyman16
Click to expand...
Click to collapse
,
JJEgan said:
JJEgan
Click to expand...
Click to collapse
!!
I need your help. I have a problem after flashing lollipop firmware on samsung galaxy note 3, sm-n900s the signal or the device has no service. Any modem use to flash?
Please, I need your help xda devs as soon as possible. Really appreciated. Thank you.
Naedean said:
I need your help. I have a problem after flashing lollipop firmware on samsung galaxy note 3, sm-n900s the signal or the device has no service. Any modem use to flash?
Please, I need your help xda devs as soon as possible. Really appreciated. Thank you.
Click to expand...
Click to collapse
Please search and read before posting.Multiple identical questions posted day after day .
Usual is wrong IMEI .
Sent from my SM-N930F using XDA-Developers Legacy app