[Q] How can i update a S7-105? - Ideos S7 General

Can anyone help me on how to update an S7-105 running 2.1update1 with kernel 262957 and firmware version S7V100R001C34B011?

How to update
kraikos said:
Can anyone help me on how to update an S7-105 running 2.1update1 with kernel 262957 and firmware version S7V100R001C34B011?
Click to expand...
Click to collapse
Hello,
1-Off your ideos
2-Copy the firmware on the sdcard and rename the folder"dload"
3-Insert the micro sd in the tablet
4-Reboot
5-Wait until the process"OK"
6-Remove the battery and micro sd
7-Replace the battery and reboot.
Hope this help

dabenaute said:
Hello,
1-Off your ideos
2-Copy the firmware on the sdcard and rename the folder"dload"
3-Insert the micro sd in the tablet
4-Reboot
5-Wait until the process"OK"
6-Remove the battery and micro sd
7-Replace the battery and reboot.
Hope this help
Click to expand...
Click to collapse
thank you,that did help.

You are welcome!

Related

New to U8800H!

Hi, i recently bought a Huawei U8800H in Hong Kong, and wanted to know if there are any updated official firmware english or spanish, because its filled with bugs and many many thing in chinese (despite changing lagauage on the phone).
My phone has this firmware: U8800H V100R001HKGC104B135
Can I put any U8800/U8800H firmware on it? Any tutorial/links?
Are U8800/U8800H interchangable?
Thanks!
Hi, as nobody ansewer yet, I found out they U8800 & U8800H are not firmware interchangeable. So Im on the quest of finding out the latest and best firmware for U8800H, and it appears that this one U8800H V100R001C00B136CUSTC38D001 (Malaysia MAXIS) is the correct one. The problem is that I cant download it anywhere (the links are invalid or down).
Could someone help me please?
Please someone?
Sent from my IDEOS X5 using XDA App
I put u8800h firmware on my u8800 so it does work, dunno it it works the other way though.
Here, i uploaded it for someone awhile ago. It's U8800H B136 Malaysia Maxis. Hope it helps. http://www.mediafire.com/?k1ccidjwpgj4dxs
Sent from Huawei X5 (Tapatalk)
Thank you!!!
Is there any procedure to fall back to older/original firmware in case of something goes wrong? ? On other forum I read about Superclock but it is incompatible with U8800H
If you need to restore back to original firmware, just place the 'dload' folder into the root of your SD Card, boot into bootloader by holding power and Vol +/- at the same time. And your phone will do the rest.
xann89 said:
If you need to restore back to original firmware, just place the 'dload' folder into the root of your SD Card, boot into bootloader by holding power and Vol +/- at the same time. And your phone will do the rest.
Click to expand...
Click to collapse
Thanks, took a chance and flashed it and it worked OK, it took 10 minutes aprox. I almost died in the process...
I hope when "Impulse 4g" (U8800H) gets released on US, it will be Android 2.3.
Hi,
I've accidentally flashed my U8800 with another version of the firmware and I would like to flash it back to the original firmware that it came with (HK PCCW) firmware.
U8800H V100R001HKGC104B153
However the links I can find seems invalid. Can anyone help to upload this firmware? Your kind help is appreciated.
Wingchiew said:
Hi,
I've accidentally flashed my U8800 with another version of the firmware and I would like to flash it back to the original firmware that it came with (HK PCCW) firmware.
U8800H V100R001HKGC104B153
However the links I can find seems invalid. Can anyone help to upload this firmware? Your kind help is appreciated.
Click to expand...
Click to collapse
You can flash it again by getting firmware into your sdcard /dload folder, for firmware check your inbox for my message

Ascend Mate 7 Full B331 Lollipop Firmware [L09/TL10] [Europe]

Firmware Details
1. Huawei Ascend Mate 7 (MT7-L09)
Device: Huawei Ascend Mate 7 (Jazz-L09)
Model: MT7-L09
Android: v5.1.1 Lollipop
EMUI: 3.1
Firmware: B331
Build Number: MT7-L09C900B331
Region: Europe
Country: Croatia
Status: Official (stable)
Type: Full firmware image
Release Date: 11.01.2016
Availability: OTA + Manual download
File Name: Huawei Mate7 Firmware(JAZZ-L09, Andriod 5.1.1, EMUI 3.1, C900B331, Croatia, Channel-Others).zip
MT7-L09
2. Huawei Ascend Mate 7 Gold Edition (MT7-TL10)
Device: Huawei Ascend Mate 7 Gold (Jazz-L11)
Model: MT7-TL10
Android: v5.1.1 Lollipop
EMUI: 3.1
Firmware: B331
Build Number: MT7-TL10C900B331
Region: Europe
Country: Hungary
Status: Official (stable)
Type: Full firmware image
Release Date: 12.01.2016
Availability: OTA + Manual download
File Name: Huawei Mate7 Firmware(JAZZ-L11, Andriod 5.1.1, EMUI 3.1, C900B331, Hungary, Channel-Others).zip
MT7-TL10
Transfer the resulting ‘dload’ folder to your Mate 7’s external microSD card and finally install it from Settings > Updates > Menu > Local Update.
How's that firm? Any changes?
Send from Mate 7 using tapatalk
Has anyone tried the B331 for TL10? How was it? What was your phone firmware prior to this one?
I have p8 lite, not I can try them
Who have the root instead how it should proceed? sorry my English.
timos said:
Who have the root instead how it should proceed? sorry my English.
Click to expand...
Click to collapse
Simply download the appropriate Zip package from above and extract it. Transfer the resulting ‘dload’ folder to your Mate 7’s external microSD card and finally install it from Settings > Updates > Menu > Local Update.
linus2014 said:
Simply download the appropriate Zip package from above and extract it. Transfer the resulting ‘dload’ folder to your Mate 7’s external microSD card and finally install it from Settings > Updates > Menu > Local Update.
Click to expand...
Click to collapse
I TWRP installed and not the recovery stock. it's the same? Thanks.
timos said:
I TWRP installed and not the recovery stock. it's the same? Thanks.
Click to expand...
Click to collapse
No, it's not the same..you must back to Stock Recovery
the manual says you can upgrade from any version to b331. me, b324
Not is the same
Can i upgrade from B145?
mmunkn said:
Can i upgrade from B145?
Click to expand...
Click to collapse
important that the file custom is C900
Confirming successful update from B328 to B331 on my MT7-TL10, rooting still works. Haven't come across any issues yet, hopefully stays that way...
MuPp3t33r said:
Confirming successful update from B328 to B331 on my MT7-TL10, rooting still works. Haven't come across any issues yet, hopefully stays that way...
Click to expand...
Click to collapse
beautiful thing:angel:
MuPp3t33r said:
Confirming successful update from B328 to B331 on my MT7-TL10, rooting still works. Haven't come across any issues yet, hopefully stays that way...
Click to expand...
Click to collapse
can point me the simplest way to root? :good:
With this full update, no need to be on B324 ? I can flash directly from B327 ? (After flash stock recovery ^^)
Thanks !
Couzziin said:
With this full update, no need to be on B324 ? I can flash directly from B327 ? (After flash stock recovery ^^)
Thanks !
Click to expand...
Click to collapse
No need. I think you can flash it directly from B327. I flashed it from B130. So far no issues yet.
linus2014 said:
important that the file custom is C900
Click to expand...
Click to collapse
Current version is MT7-L09V100R001C00B145.
I appriciate the help.
mmunkn said:
Current version is MT7-L09V100R001C00B145.
I appriciate the help.
Click to expand...
Click to collapse
After copying the folder dload in microSD, the only thing you can do is a deep format through recovery TWRP or cwm, after vol - + power, and install the full firmware.
I have flash stock recovery, remote root from SuperSU, but software install failed all the time.. one time install reached 90% but still there and i have to reboot and restart, but failed at 4%...

Downgrade Honor 4C B310 To B120 Pakistan

Hi Guys
i have A Honor 4C
I Was On Lolipop 5.1 b310 And I Very Tried To Downgrade To Kitkat4.4.x B120
Now I Done
i Want to Share My Work To Others
1-Craet A Folder By Name "dload" in Direct Sd Card And Then Put A File "update.app"(~20 kb) inte That Folder
2-go To setting>update>local Update And Install it
3-if That succeed Make A Factory Reset And Wipe Cach
4-delete File"update.app"(~20 kb) In "dload" Folder
5-extract B120 Rom "Update.app"(~1.65 Gb)
6-put b120 Rom "update.app"(~1.65 Gb) that You Extracted Into "dload" Folder That You Created Before In Sd Card
7-again go To setting>updater>menu>local Update And Install it
8-Done
Pay Attention to "Update.app"(~20 Kb) and "Update.app"(~1.65 Gb) are different
Download ⇩⇩⇩⇩
Update.app (~20 Kb)
this Is My Works To Downgrade To Kitkat
i Hope This help You
if It Was Secceed Please reply or Press "thanks" bottom
sorry For My Bad English
waiting...
...
Is this rollback file on huawei .com?
Please Put address.
thanks
sadeghspy said:
Is this rollback file on huawei .com?
Please Put address.
thanks
Click to expand...
Click to collapse
i think this file is a rollback for downgrade to b120 pakistan rom
file is availible by orange color
i will put it again for you.
http://www.rodfile.com/rjazbxpt2mhs
that file downloaded 46 time but 1 reply is here
i want know if this work for you
i test it on C185B310 don't work (exactly this method)
-----------
edited
correct method : use g play mini chc-u03 b123a for downgrade
please give the link for g play mini firmware
sadeghspy said:
i test it on C185B310 don't work (exactly this method)
-----------
edited
correct method : use g play mini chc-u03 b123a for downgrade
Click to expand...
Click to collapse
I am also struggling to downgrade, i am from pakistan please give the link to download g play mini firmware.thanks in advance
oh i applied it on b320.. after updating i get balongc52b311 but with the same android version 5.1.1.... plz help me how to change it
I upgrade from 4.4.2 to 5.1.1
I am satisfied with 5.1.1 ,but the buttery drain very fast.
and because of battery consumption I have to downgrade to 4.1.1.
please help me.
Is the method of this topic working?
please feedback please.
Sent from my CHM-U01 using Tapatalk
sadeghspy said:
Is this rollback file on huawei .com?
Please Put address.
thanks
Click to expand...
Click to collapse
It will come with lollipop rom.
Thnks for the guide
Great
does the downgrade file works only with this firmware version or have you tried it with any other version?
Downgrade file should work on any base firmware version . Like the same Android version or emui .
okay thanks
My pleasure:angel:
download link is not working anymore

Help mate 8 blocked

Good morning I need help plase.
I bought on the internet mate 8 4 gb ram 64 bg NXT L29-C636.
I updated FIRMWARE to b180 then b330.
I had read that to upgrade to b563 (android 7) I had to do downgrade to b211. I tried and the phone stuck.
It goes into e-recovery and can not install any firmware. Help
I have read that I have to install an original firmware. You can help me?
Thanks
I did the same and experienced the same. Search for "DC phoenix method 2". Basically you repair it via loading a special huawei firmware (with partition repair I believe). Your device will then boot into this limited, old version of android that comes with some diagnostics tools + SD upgrade functions. Use the latter to load your update.app.
Specifically *in our case* (L29C636 330->211 then stuck), I had success to load 321 and let it OTA to 330 and then 563. I could not do 211 or 585, only 321. Perhaps 330 would do too but did not try.
favaroale said:
Good morning I need help plase.
I bought on the internet mate 8 4 gb ram 64 bg NXT L29-C636.
I updated FIRMWARE to b180 then b330.
I had read that to upgrade to b563 (android 7) I had to do downgrade to b211. I tried and the phone stuck.
It goes into e-recovery and can not install any firmware. Help
I have read that I have to install an original firmware. You can help me?
Thanks
Click to expand...
Click to collapse
so what was your last firmware who worked ?

Honor 8 Lite CN version to nordic?

Hi,
I have a Honor 8 Lite from china that i would like EU/Nordic firmware in. I have problem with what files I should use, and also the meaning of saving OEM info.
I have unlocked boot loader and installer TWRP, what is the next step?
Would appreciate any help! Thanks.
Model: PRA-AL00
MeXii said:
Hi,
I have a Honor 8 Lite from china that i would like EU/Nordic firmware in. I have problem with what files I should use, and also the meaning of saving OEM info.
I have unlocked boot loader and installer TWRP, what is the next step?
Would appreciate any help! Thanks.
Model: PRA-AL00
Click to expand...
Click to collapse
You can flash custom ROM..
MeXii said:
Hi,
I have a Honor 8 Lite from china that i would like EU/Nordic firmware in. I have problem with what files I should use, and also the meaning of saving OEM info.
I have unlocked boot loader and installer TWRP, what is the next step?
Would appreciate any help! Thanks.
Model: PRA-AL00
Click to expand...
Click to collapse
Do you want to debrand to some other region? If so, you need to have oeminfo file of that variant and then download the files for new model and flash but unless you have the oeminfo file you can not proceed further.
It will be the similar process mentioned in my signature for debranding and just a change of respective files
tried
hassanjavaid8181 said:
You can flash custom ROM..
Click to expand...
Click to collapse
hi I have the same problem. i tried to flash a linaegeOS but when I restart the phone the screen is black.
I tried to flash even elite rom. but twrp give me error 6.
does anyone have the oem info file for honor 8 lite?
crt416 said:
hi I have the same problem. i tried to flash a linaegeOS but when I restart the phone the screen is black.
I tried to flash even elite rom. but twrp give me error 6.
does anyone have the oem info file for honor 8 lite?
Click to expand...
Click to collapse
You try to flash elite ROM for honor 6x??
No i tried to flash elite rom from below link:
https://forum.xda-developers.com/8-lite/development/elite-rom-elite-rom-v5-1-honor-8-lite-t3698086
I flashed the region patch, and now in model info, I have generic id a15 and version fw nrd90m test-keys. After this step I tried to flash elite rom but I receive error 6.
I'd like to change generic regional id with an international id and after try to put in an European stock fw
crt416 said:
No i tried to flash elite rom from below link:
https://forum.xda-developers.com/8-lite/development/elite-rom-elite-rom-v5-1-honor-8-lite-t3698086
I flashed the region patch, and now in model info, I have generic id a15 and version fw nrd90m test-keys. After this step I tried to flash elite rom but I receive error 6.
I'd like to change generic regional id with an international id and after try to put in an European stock fw
Click to expand...
Click to collapse
solve your issue?
No yet, I'm stuck in NRD90M TEST-KEYS
Rommco05 said:
You need to install zip data but I'm not sure if it is a firmware for this phone
Click to expand...
Click to collapse
Problem solved big thanks to @Akam_bad.
crt416 said:
Problem solved big thanks to @Akam_bad.
Click to expand...
Click to collapse
Hi bro i deleted my telegram account now registered again
My id
http://t.me/just_myself_know
MeXii said:
Hi,
I have a Honor 8 Lite from china that i would like EU/Nordic firmware in. I have problem with what files I should use, and also the meaning of saving OEM info.
I have unlocked boot loader and installer TWRP, what is the next step?
Would appreciate any help! Thanks.
Model: PRA-AL00
Click to expand...
Click to collapse
Saving oem info: do a backup in TWRP. Copy backup to pc or sd.
Twrp backup of pra-la1c185b165
https://mega.nz/#!4bhkRDiA!WPFFffQr17KjgrfoyPn7KHNVbthDHALp54Pgms43jkY

Categories

Resources