[Q] Galaxy s4 I9505 XXUDMH9 - Galaxy S 4 Q&A, Help & Troubleshooting

Hi all, really need your help. 2 weeks ago I bought this device, before never used android. 3 days ago by connecting it to a computer, the Kies software has given the message
"that there is a new version", I agreed, and then device as if replaced, it start to work slowly stucking on some screens, such as phone book or phone itself, it gives a strange message, that he had to stop the work of a program. Then I tried to solve the problem, but everything i did not fixed the issue, I even think that made it worse. I did the following things.
I tried to root device, did it as it was written on some site, after a Odin has finished, I found SuperSu program, but SuperSu wrote that the binary ihe s not installed, checking the Root, no root access. 2 Performed Data factory reset twice did not helped, Performed to flash again the latest official firmware, but also did not helped, the problem not solved, Uninstall SuperSu. no longer know how else to help themselves, need professional help.
Please write me what should i do? how can return the previously firmware, or how to root it correctly and install new Rom.
My device is Galaxy S4 i9505 T-Mobile Germany version.
RoM version: I9505XXUDMH9
Kernel: 3.4.0-1220396
[email protected]#1
Build Number JDQ39.I9505XXUDMH9

Related

[Q] Galaxy s4 I9505 XXUDMH9

Hi all, really need your help. 2 weeks ago I bought this device, before never used android. 3 days ago by connecting it to a computer, the Kies software has given the message
"that there is a new version", I agreed, and then device as if replaced, it start to work slowly stucking on some screens, such as phone book or phone itself, it gives a strange message, that he had to stop the work of a program. Then I tried to solve the problem, but everything i did not fixed the issue, I even think that made it worse. I did the following things.
I tried to root device, did it as it was written on some site, after a Odin has finished, I found SuperSu program, but SuperSu wrote that the binary ihe s not installed, checking the Root, no root access. 2 Performed Data factory reset twice did not helped, Performed to flash again the latest official firmware, but also did not helped, the problem not solved, Uninstall SuperSu. no longer know how else to help themselves, need professional help.
Please write me what should i do? how can return the previously firmware, or how to root it correctly and install new Rom.
My device is Galaxy S4 i9505 T-Mobile Germany version.
RoM version: I9505XXUDMH9
Kernel: 3.4.0-1220396
[email protected]#1
Build Number JDQ39.I9505XXUDMH9
sgotfrid said:
Hi all, really need your help. 2 weeks ago I bought this device, before never used android. 3 days ago by connecting it to a computer, the Kies software has given the message
"that there is a new version", I agreed, and then device as if replaced, it start to work slowly stucking on some screens, such as phone book or phone itself, it gives a strange message, that he had to stop the work of a program. Then I tried to solve the problem, but everything i did not fixed the issue, I even think that made it worse. I did the following things.
I tried to root device, did it as it was written on some site, after a Odin has finished, I found SuperSu program, but SuperSu wrote that the binary ihe s not installed, checking the Root, no root access. 2 Performed Data factory reset twice did not helped, Performed to flash again the latest official firmware, but also did not helped, the problem not solved, Uninstall SuperSu. no longer know how else to help themselves, need professional help.
Please write me what should i do? how can return the previously firmware, or how to root it correctly and install new Rom.
My device is Galaxy S4 i9505 T-Mobile Germany version.
RoM version: I9505XXUDMH9
Kernel: 3.4.0-1220396
[email protected]#1
Build Number JDQ39.I9505XXUDMH9
Click to expand...
Click to collapse
Try Emergency Firmware Update in Samsung Kies, it will full format your phone and reinstall the stock version for your phone

WIFI won´t connect after manual update to Kitkat 4.4.2

Hello everyone, i'm a new member. I apologize if my english is not good enough.
After been driven insane by one pre-installed app from my Operator (Claro Peru) i decided that it was time to root my device to get rid from that pest. I'm a noob, so i started to investigate about the safest methods to not damage my phone. My Device's model is SGH I337m.
The plan was to update the FW from JB 4.3 that came with my phone to 4.4.2 and then proceed to root. I downloaded the Canadian 4.4.2 FW with build version I337MVLUFNC1 and installed manually with Odin. After the phone rebooted, my S4 was upgraded with 4.4.2 but Samsumg keyboard was going insane, so i went to the apps and solved that cleaning the cache/data. Then i noticed that the Wifi wasn't connected, i tried to turn it on, but then a message with a shield appeared saying that my device security stopped the operation. Beliving it was only a problem with KNOX, i installed autoroot (CF-Auto-Root-jfltecan-jfltevl-sghi337m) with Odin, open SuperSU and stopped it from working, but the Wifi still wouldn't connect.
So the first thing that crossed my mind was to unroot and do a factory reset, didn't work. The FW still was 4.4.2, so i´ve been searching solutions with this FW because i've read some cases of devices that stopped working completely after trying to do a downgrade. so i don't want to go to that route for now.
After a couple hours of search, some solutions i found on the forum were:
- Install Faux123 Kernel (Found on Youtube, this would be the thread i think http://forum.xda-developers.com/showthread.php?t=2273437http://forum.xda-developers.com/showthread.php?t=2273437
- Flash a modem for i337m
- Safestrap recovery and bypasslkm.zip
- Downgrade
I haven't tried any of this methods because i dont want to get into a deeper trouble. In the first solution i'm not sure what to do because this is the files the author recommends for canadian models (i337m), but when i enter here http://faux.romhost.me/jflteatt/jb42/http://faux.romhost.me/jflteatt/jb42/ only jflteatt appears, and that would be i337 model, isn't it? I thought that installing it may cause more troubles, so i didn't do it.
For the flashing modem method, i'm not really sure if installing a modem from another country would get me in trouble, so again i didn't proceed.
I found the Safestrap and recovery method on a downgrade thread for the i337, so again, didn't do it.
So, is there a way to get one of this methods working on i337m to get wifi working again, or is there any other better method to get back wifi.
I would really appreciate any help you can give me guys.
Copellius said:
... My Device's model is SGH I337m.
The plan was to update the FW from JB 4.3 that came with my phone to 4.4.2 and then proceed to root. I downloaded the Canadian 4.4.2 FW with build version I337MVLUFNC1 and installed manually with Odin. After the phone rebooted, my S4 was upgraded with 4.4.2 but Samsumg keyboard was going insane, so i went to the apps and solved that cleaning the cache/data. Then i noticed that the Wifi wasn't connected, i tried to turn it on, but then a message with a shield appeared saying that my device security stopped the operation. Beliving it was only a problem with KNOX, i installed autoroot (CF-Auto-Root-jfltecan-jfltevl-sghi337m) with Odin, open SuperSU and stopped it from working, but the Wifi still wouldn't connect.
So the first thing that crossed my mind was to unroot and do a factory reset, didn't work. The FW still was 4.4.2, so i´ve been searching solutions with this FW because i've read some cases of devices that stopped working completely after trying to do a downgrade. so i don't want to go to that route for now.
After a couple hours of search, some solutions i found on the forum were:
- Install Faux123 Kernel (Found on Youtube, this would be the thread i think http://forum.xda-developers.com/showthread.php?t=2273437http://forum.xda-developers.com/showthread.php?t=2273437
- Flash a modem for i337m
- Safestrap recovery and bypasslkm.zip
- Downgrade
I haven't tried any of this methods because i dont want to get into a deeper trouble. In the first solution i'm not sure what to do because this is the files the author recommends for canadian models (i337m), but when i enter here http://faux.romhost.me/jflteatt/jb42/http://faux.romhost.me/jflteatt/jb42/ only jflteatt appears, and that would be i337 model, isn't it? I thought that installing it may cause more troubles, so i didn't do it.
For the flashing modem method, i'm not really sure if installing a modem from another country would get me in trouble, so again i didn't proceed.
I found the Safestrap and recovery method on a downgrade thread for the i337, so again, didn't do it.
So, is there a way to get one of this methods working on i337m to get wifi working again, or is there any other better method to get back wifi.
I would really appreciate any help you can give me guys.
Click to expand...
Click to collapse
ok so you have the i337m canadian version... making anything related to safestrap and the att i337 irrelevant, completely different methods so don't get them confused lol
you were updating from stock 4.3 right? your best bet is to factiry reset and reflash stock fw for 4.4.2 before you brick your device... kitkat is very different from 4.3, maybe read up on it a bit too...
for ex, the "message with a shield appeared saying that my device security stopped the operation" isn't related to needing to root, it's an option under security settings.
to enable superuser on kitkat you need to enable developer options, then enable superuser. I prefer supersu so manually install that from play store afterwards. I recommend checking and/or enabling this as soon as the phone completes booting up after flashing.
also I think there's a known issue w/ 4.4.2 and wifi not turning on until after 2nd boot completed if I rememebr correctly, been using 4.4.4 for awhile now though so could be wrong...
good luck and check out the help section :angel:

WIFI not working after using KIES to update

Hi all,
Phone Details:
Spring Galaxy S4
Baseband Version L720TVPUBNG5
Used CF autoroot
This all started a few days ago. The latest OTA update came out and my phone kept telling me I had insufficient storage for the update. I figured it was because I had it rooted. I followed QBking77's video for Unroot / Unbrick. Downloaded all files recommended in the video.
Every time I try to flash with ODIN I get a failure. I have tried three different .tar versions at this point, it always seems to fail after "aboot" attempts to flash. Two different cables, both came with an SGS4.
I finally had enough and used the factory reset. After factory reset I used KIES for my update. The phone took it fine and rebooted. Although now I have no WIFI.
When initiating WIFI it will tell me that the security application has rejected a request to protect my phone. I deleted lookout security even though I have never used it.
Does this have something to do with KNOX? Knox flag is at 0x1 so I know it is tripped. Is there a way to completely flash my phone back to a stock state with the original recovery and rom?
Are there any options for me to get my phone back in order. I really dont give a **** about root or roms, I just need my WIFI. Would my best bet be to use a custom firmware?
Your correct thread have to go: HERE.

[Q]SOLVED Noob GT-I9505 WIFI dead after upgrd 4.4.2 searched and tried all solutions

First of all please forgive me for opening yet another S4 wifi problem after kitkat upgrade, but I have tried everything I could possibly find here, on youtube and other forums. The only thing left to try is flash the modem but I'd rather ask before I brick my phone
I'm not quite sure if this is the same issue every single time or if in my case it is due to my ignorance and errors. I was an iphone/unlock/jailbreak user until last year so please bear with me. Android is new and fun (but scary) territory to me.
Situation, what I did and possible mistakes on my side:
-I'm in Spain but I bought my factory unlocked phone on amazon and it was for the Polish market (GT-I9505 Black, 16 Gb)
-My device was rooted don't even remember how I did it last year so no useful info on that side a part of using odin for windows.
- Until yesterday I was on jellybean, not quite sure if 4.2.2 or 4.3
- Yesterday I upgraded to 4.4.2 via mobile odin and yes I checked the boxes about clearing/deleting cache or whatever it's called.
- Used a stock firmware downloaded from other site (that one starting with "S" and with a great amount of firmwares for samsung devices of several countries)
- I chose a firmware randomly (maybe this was my mistake) because I hade read that the firmware was not that important and people where usimg leaked german firmwares on on phones from elsewhere. But I did choose one that matched the country of my phone (XEO/XX Poland)
- Everything is working fine but without wifi I'm buying new Mb bundles almost every 2 hours and I'll be broke very soon
If you guys think the solution is flashing the modem which file should I use? I see lots of them with different models/codes and I'm completely lost and have read a lot about messing with bootloaders/modems etc bricking devices so I'm freaking scared and ask for your charitative help!
All the info I could gather about my device right now (now I know I should have gathered this info also before attempting to upgrade but it's too late now!
SAMSUNG GALAXY S4 GT-I9505 Black Edition
Manufacturing date: 2013-12-23
BASEBAND Version: I9505XXUEMK8
BOOTLOADER Version:I9505XXUEMK8
PDA Version: I9505XXUGNG8
CSC Version: I9505YXZGNH2
Kernel: 3.4.0-2309103
KOT49H-I9505UGNG8
Android 4.4.2
Product code: GT2I9505ZKAXEO
Original CSC: XEO
Firmsware's CSC: XEO
Active CSC code: XEO
CSC Country: Poland
Any help would be greatly appreciated, I feel so dumb and frustrated right now that any joke or insult would be accepted with humbleness lol
Forgot to add I used the *#0011# command and went to wifi menu. Tried the ping test and it states: passed
status: DISCONNECTED
SSID: Unknown SSID
( In case this info is of any use )
voxel.xyz said:
Forgot to add I used the *#0011# command and went to wifi menu. Tried the ping test and it states: passed
status: DISCONNECTED
SSID: Unknown SSID
( In case this info is of any use )
Click to expand...
Click to collapse
Relax it has solution . The problem becomes coz the baseband and the bootloader are olds (android 4.3).
SAMSUNG GALAXY S4 GT-I9505 Black Edition
BASEBAND Version: I9505XXUEMK8
BOOTLOADER Version:I9505XXUEMK8
PDA Version: I9505XXUGNG8
CSC Version: I9505YXZGNH2
* Quick solution for recover WIFI:
1. Reflash the STOCK I9505XXUGNG8 (XEO) firmware via ODIN.
2. Let the process finish and reboot normally.
3. Dial *#1234# and have to appear this:
AP: I9505XXUGNG8
CP: I9505XXUGNG8
CSC: I9505YXZGNH2
4. Reflash again if not. Good luck
Thank you so much for your helpful reply Joku1981 !!!!! You made my day!!!
Can I do that with Mobile Odin??? My PC broke (Graphics card burnt) and until a couple of months won't be able to buy a new one.
To make sure I understand you: You mean Flash again the same firmware I used to upgrade to 4.4.2 in the first place?
I used this Firmware: I9505XXUGNG8_I9505YXZGNH2_XEO
should I try Flashing that same Stock Firmware again? and if does not work keep reflashing until the baseband and the bootloader get updated?
Why did they not update ? is this common or an error on my side???
I hope it can be done with mobile Odin since I can keep my root status, If I have to do it in Desktop Odin do I have to Re-Root after flashing???
Thank you so much for you kind help!!!!!!
Joku1981 said:
Relax it has solution . The problem becomes coz the baseband and the bootloader are olds (android 4.3).
SAMSUNG GALAXY S4 GT-I9505 Black Edition
BASEBAND Version: I9505XXUEMK8
BOOTLOADER Version:I9505XXUEMK8
PDA Version: I9505XXUGNG8
CSC Version: I9505YXZGNH2
* Quick solution for recover WIFI:
1. Reflash the STOCK I9505XXUGNG8 (XEO) firmware via ODIN.
2. Let the process finish and reboot normally.
3. Dial *#1234# and have to appear this:
AP: I9505XXUGNG8
CP: I9505XXUGNG8
CSC: I9505YXZGNH2
4. Reflash again if not. Good luck
Click to expand...
Click to collapse
SOLVED!!!!!
After nobody answered if I could use again "mobile Odin" to flash once more and try to fix my wifi not working I opened mobile odin and it gave me a warning about my version and having a wrong bootloader as a possibility of soft bricking my phone so I decided to stay away of mobile Odin this time.
I used desktop Odin (at work since my pc broke) and exactly the same firmware file downloaded from sammobile (but re-downloaded it just in case) and had to flash twice, the first time it went through the whole process ok right until the end where it showed the FAIL message.
I didn't know if I should turn off the phone stuck in download mode and with the process bar at 100 % or retry flashing without turning it off. So I decided not to turn it off (afraid it would get soft bricked or something). I closed mobile Odin but left phone On with download mode screen active and opened mobile Odin again got the "added"message and the blue color showing it was properly connected to the phone and started flashing process again....
I started getting red error messages saying the progress bar display was wrong (and it wasn't updating/kept stuck in the previous 100%) but after it finished it was flashed and everything was ok. WIFI WORKED!!!!!!
Now the weird part.....in case this happens /helps someone else:
- My phone DID NOT get wiped. My launcher and my apps stayed intact (I thought flashing even the same firmware always wiped data, I'm I wrong???)
- All my root apps (root explorer, titanium backup, so on and so forth) where there and working fine. One root checker stated I was rooted and another one stated I wasn't but even my launcher (nova) was working just as if I never flashed the phone.
- Since I was unsure of my "root" state and I did not have "supersu" app in my apps drawer I tried installing it via playstore but It always gave an error message (the application could not be installed in the default location)
- I rooted again just in case and the root process finished without errors but still I had no "supersu" app and one root checker said I was rooted and the other I wasn't. Tried installing "supersu" from the playstore but same error and could not get installed.
- I searched here and in other forums for similar problems/solutions but nothing worked until I tried several things that fixed the problem. Not really sure which fixed it so I will write them down in the order I did them:
1. Opened folder mount which I already had installed and it gave me an error and asked me to try the fix which I did.
2. Opened linked2sd which I already had installed also previous to the firmware flash. It gave me an error and asked me which was the partition to use (as when I first installed it) in my case it was ext4. And it seemed to start working as it normally does. No further error when reopening it.
3. Rebooted the phone and tried entering recovery mode to wipe cache etc but It never entered recovery mode. I get the message about going into recovery mode (top left corner small red letters) But right after that it reboots and I get the samsung logo and my home screen.
4. Tried reinstalling supersu again and no success. (By the way before I did all this steps I tried rooting again but got to the same point. No supersu on my apps drawer)
5. Downloaded BusyBox install (opened it but did not use it in any way, maybe something in the installation fixed my problem)
6. Opened mobile Odin just for curiosity sake and it opened fine and asked for downloading of the extra stuff as when I installed it the first time. After that I closed it
7. Rebooted normally (no recovery mode since I'm stuck without it)
8. Tried installing "supersu" and NOW it worked!!!
9. Checked in both root checker apps and both confirm I'm rooted and supersu started asking for granting permissions to apps again as it normally does!
10. Everytime I attempted flash, root, and even after some reboots I took the battery off (since I read in several threads it helped/was mandatory)
Conclusion now my WIFI problem is fixed, my root problem (that appeared doing the reflash for fixing my wifi problem) is also fixed. The only thing I could not fix is not being able to get into recovery mode.
Does anyone know a solution for recovering the ability to get into recovery mode????
Thanks to Joku for lighting me into re flashing once and again until my wifi was fixed!

[Q] Quick Question If Someone Has a Moment, Please

I just swapped from my Amaze 4g, to a used Note 3, and I'm a little lost as far as where I should start.
It says that it's on 4.4.2, and that I cannot update due to a modified system.
Basically, I would like to get updated to 5.1.1 (or as close as is official for the Note 3), and root it.
I'm afraid I'm not familiar with Samsung devices, and because I purchased this from ebay, I don't know how to tell the exact state that the former user put it in (I expected they would return it to stock prior to selling).
It's currently a T-Mobile branded, SM-N900T, on 4.4.2, build is KOT49H, security software MDF v1.0 release 2. Kernel is 3.4.0-660648.
It is supposedly unlocked for carriers, though I have not attempted a SIM card use yet, until I can tell that what I have is a valid device and the IMEI is checked out.
Any thoughts on how to validate the IMEI, and sort out how to get my new phone up to date would be appreciated. As I stated, I expected the vendor would have returned it to stock, but that is clearly not the case, so I don't want to accidentally boot loop it by doing something I shouldn't. I have not owned a Samsung before, so I want to be careful on how it differs from my Nexus 7, Amaze 4g, and Droid X, as they're all obviously very different in the OS area.
Thank you for the help1
Download tbe stock 4.4.2 rom and use odin to install. Then you will get the OTA updates.
Sent from my SM-N900P using Tapatalk
There is no stock 5.1.1 for note 3, only cm12.1/ aosp. Latest is 5.0 and you can use odin to flash. Maybe it's rooted that's why you can't update.
bladebarrier said:
I just swapped from my Amaze 4g, to a used Note 3, and I'm a little lost as far as where I should start.
It says that it's on 4.4.2, and that I cannot update due to a modified system.
Basically, I would like to get updated to 5.1.1 (or as close as is official for the Note 3), and root it.
...
Thank you for the help1
Click to expand...
Click to collapse
Some apps to install from Play Store...
Phone INFO Samsung - this will tell you all about your phone and the firmware etc.
Root Checker Basic - tells you if you are rooted or not.
SuperSU - this is so valuable you should buy the Pro licence. Chainfire does some great work for our phones.
TWRP - I have the zip version on my extSDCard and an Odin version on PC in case I have to rebuild from a Stock firmware. CWN works OK but most ROM builds seem to be for TWRP I think and a backup from one will not work on the other.
I don't know your previous phone so you probably need Odin v3.09 - this sits on PC and lets you flash firmware to the phone. (connected by USB)
For which you need Samsung USB drivers so the PC will recognise the phone. Install on PC before connecting phone.
Then do some browsing and find the processes to root your phone and install the ROM you want. If you just want Stock and access to all your phone, you can root it after flashing the original v5.0 download (from Sammobile or similar site - note on Sammobile you need a free account to DL) and then install Custom recovery (if wanted - it WILL trip the Knox flag but that may not matter given it's 2nd hand and might already be tripped anyway)
Read, make SURE you understand what is being said BEFORE you do anything - ask if you don't.
Good luck...
N9005 Lollipop brick
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode but re flashing the firmware always fails.....is there a solution for this.....please help
Thank you all for the info, especially the detailed info from Journyman16. I checked, and it is flagged as custom, which is fine, so I'm going to go ahead and try to return to mostly stock, update it, and root it.
Ok, everything went well. I had to do two attempts at rooting, but I think it's just one of those things where sometimes it doesn't restart into the process every time.
All seems good. I'm on 5.0, rooted, busyboxed, and smooth sailing.
Thank you all, again, for the tips. The Note 3 is running very well. Thank you to all of the devs that have made this process so refined. I've donated to you before, and did so again today. It's outstanding to have such well versed coders, on XDA, helping out the community.
mjmbirige said:
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode but re flashing the firmware always fails.....is there a solution for this.....please help
Click to expand...
Click to collapse
You have never learned not to ask in others posts? What does your problem has to do with this topic at all?
When you need help. Just click on Q&A then Create a new thread. How hard is it?

Categories

Resources