Database Users

Mortscript Sendkeys Help

Hi,
am trying to use Mortscript to automate some key presses on my E650. The script is below.
It gets so far to opening settings.exe and then nothing happens.
What am I doing wrong?
RunCheck = 0
While (1)
HandsFreeState = RegRead("HKLM", "System\State\Hardware", "Handsfree")
If (HandsFreeState = 1 && RunCheck = 0)
Run "\Windows\Settings.exe"
Sleep 2000
SendKeys("6")
Sleep 2000
SendKeys("3")
Sleep 2000
SendKeys("1")
RunCheck = 1
EndIf
If (HandsFreeState = 0 && RunCheck = 1)
# - Enter any code you wish to execute on disconnect here.
ToggleDisplay(0)
RunCheck = 0
EndIf
Sleep (1000)
EndWhile

I've ran into this before.
you might try sending a mouse click to the field that you want the numbers inputed to. (this insures that the field has focus)

Galaxy S4 Kernel - Sound Brick

Hello, sorry when i post a new Thread i think that many users have the same Problem but my english is not so good that i can find the right Thread ... I have Flash :
I9505_Omega_v2.0_GUEUBMG8_Android_4.3_md5_830353DC5EB14151A017C340C1285E51
Now i have flash a other Rom:
aokp_i9505_unofficial_2013-05-19
and that:
I9505XXUAMDM_I9505OXAAMDM_I9505XXUAMDM_HOME.tar
Now i dont have Sound anymore (micro and Sound are Dissable) Now i have read, that i have make a Bootloader Downgrade and have shoot i up my Bootloader with that :S
What can i doo that Sound works again !? Thanks for Help

wolfsstolz said:
Hello, sorry when i post a new Thread i think that many users have the same Problem but my english is not so good that i can find the right Thread ... I have Flash :
I9505_Omega_v2.0_GUEUBMG8_Android_4.3_md5_830353DC5EB14151A017C340C1285E51
Now i have flash a other Rom:
aokp_i9505_unofficial_2013-05-19
and that:
I9505XXUAMDM_I9505OXAAMDM_I9505XXUAMDM_HOME.tar
Now i dont have Sound anymore (micro and Sound are Dissable) Now i have read, that i have make a Bootloader Downgrade and have shoot i up my Bootloader with that :S
What can i doo that Sound works again !? Thanks for Help
Click to expand...
Click to collapse
wipe data and cache.
if not, reflash your stock firmware, wipe data and cache, reboot

no, that dosnt work, that is a buck in bootloader (4.3 downgrade) i have do flash all roms (wipe too) i have flash a pit rom too but this PRoblem with Bootloader brick is the same. I have Read that many German Users have the same Problem when they flash a higher rom and downgrade it then.I think i must wait for a Developer who have the same Problem :S
When another User Have the same Problem it Please write it here to see that is a big problem for other Users too
Sorry but with Apple i dont have this PRoblem maybe i go back XD

wolfsstolz said:
no, that dosnt work, that is a buck in bootloader (4.3 downgrade) i have do flash all roms (wipe too) i have flash a pit rom too but this PRoblem with Bootloader brick is the same. I have Read that many German Users have the same Problem when they flash a higher rom and downgrade it then.I think i must wait for a Developer who have the same Problem :S
Click to expand...
Click to collapse
why dont you flash MH8 or 5 firmware, it contains the newer bootloader
Edit: please take a look here http://forum.xda-developers.com/showthread.php?t=2436368

when i flash that Sound dont go anymore too. the Problem is a bug in botloader in the newer FW when i have read that correctly

Sorry, i have read that not right .....
Can you give me a link from Rom ?! I only found a rom
forum.xda-developers.com/showthread.php?t=2299087
but this is only without new Bootloader and i think i need that with bootloader or works that too !?
Thansk for Help

Push Thread Too ....
I have Problem with Sound(Downgrade to Stock Rom from Omega Rom)
Now i have Read that i must install fallow Roms:
Factory_Firmware_Full_Wipe_I9505XXUBMGA_I9505OXXBM G3_NEE
and that:
GT-I9505-Factory-Firmware-Full-Wipe-DBT
Basis I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8
This Roms are in Forum but Theme is Close and Files only on **** hoster (Hotfile)
Who can upload that to another hoster (Hotfile is very slow in Germany 30 kb and 1 gb download go of :S ) like upoaded.to or mega.co.nz ?!
Who can help me for Sound come back please help. I have do all what i have read in Forum but nothing works for me.
Thanks for Help.

No People have a Idea !????
I have make a Photo from logger, it was nice when a dev can look ...
Who can tell me from that Folder:
My Android Folder:
1. i have more "mnt" Folder (mnt + mnt_1)
2. On Storage Folder i can see: USBDriveA ,USBDriveB, USBDrive ..... looks folfer i can see: ExtSdCard - sdcard_3
3. I have a folder named: Firmware + Firmware-mdm
4. ALL Files in : sys/fs/selinux are empty, 0kb , Subfolder too
5. In mnt_1 sys/fs/ext4 Folder are too mutch Folders !? looks on mmcblk0p10 + 16+18+26+29 with same Files
and many more .... Please , who can look on his Machine to this Folders, is that the same !?
Here Are Photos from logger that my Sound dosnt work:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I cant believe that no People can help me to bring back my Sound ....
Here a logcat answer from Sound .....
D/ALSADevice(10225): No valid input device: 0
V/ALSADevice(10225): switchDevice,rxDev:Speaker, txDevnull), curRxDev:None, curTxDev:None
D/alsa_ucm(10225): snd_use_case_set(): uc_mgr 0x40f97fb0 identifier _enadev value Speaker
E/alsa_ucm(10225): Invalid current verb value: Inactive - -1
E/alsa_ucm(10225): No valid device Speaker found
D/ALSADevice(10225): switchDevice: mCurTxUCMDevivce None mCurRxDevDevice Speaker inCallDevSwitch = 0
V/ALSADevice(10225): switchDevice Done
D/alsa_ucm(10225): snd_use_case_set(): uc_mgr 0x40f97fb0 identifier _verb value HiFi
E/alsa_ucm(10225): Control device not initialized
E/alsa_ucm(10225): Control device not initialized
W/alsa_ucm(10225): error snd_use_case_apply_mixer_controls
D/ALSADevice(10225): close: handle 0x40026d40 h 0x0
D/ALSADevice(10225): open: handle 0x40026d40, format 0x2
V/ALSADevice(10225): Music case
D/ALSADevice(10225): Device value returned is hw:0,0
V/ALSADevice(10225): flags 0, devName hw:0,0
E/alsa_pcm(10225): cannot open device '/dev/snd/pcmC0D0p', errno 2
V/ALSADevice(10225): pcm_open returned fd -1
E/ALSADevice(10225): open: Failed to initialize ALSA device 'hw:0,0'
E/AudioHardwareALSA(10225): Device open failed
I/audio_a2dp_hw(10225): adev_open: adev_open in A2dp_hw module
I/AudioFlinger(10225): loadHwModule() Loaded a2dp audio interface from A2DP Audio HW HAL (audio) handle 3
I/AudioFlinger(10225): loadHwModule() Loaded usb audio interface from SEC USB audio HW HAL (audio) handle 4
D/tms_audio_hw/AudioTmsIpc(10225): adev_open : Enter
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsInitSilenceFrames : Enter
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsInitSilenceFrames : Exit
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerInit :Enter
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerInit: thread started with name =TerminalModeAudioServer and id = 1073900584
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerInit exit
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientSetup : Enter
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen :Enter
D/tms_audio_hw/AudioTmsIpc(10225): initMutex: AudioClientSocketMutex Mutex Created
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientSetup : Exit
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientInit :Enter
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientInit: thread started with name =TerminalModeAudioClient and id = 1073900664
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientInit exit
D/tms_audio_hw/AudioTmsIpc(10225): adev_open : Exit
D/tms_audio_hw/AudioTmsIpc(10225): adev_init_check : Enter
D/tms_audio_hw/AudioTmsIpc(10225): adev_set_master_volume : Enter 1.000000
I/AudioFlinger(10225): loadHwModule() Loaded tms audio interface from TMS Audio HW HAL (audio) handle 5
E/AudioPolicyManagerBase(10225): Not output found for attached devices 00000003
E/AudioPolicyManagerBase(10225): Failed to open primary output
E/AudioPolicyManagerBase(10225): getDeviceForStrategy() speaker device not found
E/AudioPolicyManagerBase(10225): getDeviceForStrategy() speaker device not found
E/AudioPolicyManagerBase(10225): getDeviceForStrategy() speaker device not found
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen Socket Success Name /data/TMAudioSocketServer
E/AudioPolicyService(10225): couldn't init_check the audio policy (No such device)
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen Bind Success gAudioServerLocalSockFd 20
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen Listen Done gAudioServerLocalSockFd 20 ret 0
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen PLATFORM_AUDIO_CMD SIZE 16
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen PLATFORM_AUDIO_DATA SIZE 24
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen PLATFORM_AUDIO_META_DATA SIZE 20
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen SizeInBytes 12288
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen : Givimg Permission 0777 mode , 0 ret
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen accept Start len 110 gAudioServerLocalSockFd 20
V/TranscoderService(10225): TranscoderService created
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen :Enter
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen Socket Success Name /data/TMAudioSocketClient
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen Bind Success gAudioClientLocalSockFd 23
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen Listen Done gAudioClientLocalSockFd 23 ret 0
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen PLATFORM_AUDIO_CMD SIZE 16
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen PLATFORM_AUDIO_DATA SIZE 24
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen PLATFORM_AUDIO_META_DATA SIZE 20
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen accept Start len 110 gAudioClientLocalSockFd 23
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen : Givimg Permission 0777 mode , 0 ret
I/power ( 5291): *** release_dvfs_lock : lockType : 1
D/CustomFrequencyManagerService( 5291): releaseDVFSLockLocked : Getting Lock type frm List : DVFS_MIN_LIMIT frequency : 1566000 uid : 10135 pid : 8603 tag : [email protected]

flash this firmware, wipe data and cache after, reboot http://www.hotfile.com/dl/243289856/5f90db9/I9505XXUDMH8_I9505OXXDMHA_BTU.zip.html

Flash stock kernel again and you would be good.
I had this issue too and found it hard way that it's custom kernel causing this issue.
You can also try this.
Switch off your phone (not restart) and wait for 15-20 secs. And turn it back on. Some users are saying, this will get back your sound.

I have flash that many Times but i will test that again .... Thanks for Help.
Is that the same Rom ? :
I9505XXUDMH8_I9505OXXDMHA_I9505XXUDMH8_HOME.tar.md5

ok, i have Flash now the Rom again, have 3 Times make a Factory Reset + Cache Wipe
Then i have Flash the Kernel only and power of for 20 Seconds my Galaxy then i have Reboot that but no Sound again
Then i have make a LogCat and the Same here: (No Speaker found)
D/ALSADevice( 6355): No valid input device: 0
V/ALSADevice( 6355): switchDevice,rxDev:Speaker, txDevnull), curRxDev:None, curTxDev:None
D/alsa_ucm( 6355): snd_use_case_set(): uc_mgr 0x407ba2f8 identifier _enadev value Speaker
E/alsa_ucm( 6355): Invalid current verb value: Inactive - -1
E/alsa_ucm( 6355): No valid device Speaker found
D/ALSADevice( 6355): switchDevice: mCurTxUCMDevivce None mCurRxDevDevice Speaker inCallDevSwitch = 0
V/ALSADevice( 6355): switchDevice Done
D/alsa_ucm( 6355): snd_use_case_set(): uc_mgr 0x407ba2f8 identifier _verb value HiFi
E/alsa_ucm( 6355): Control device not initialized
E/alsa_ucm( 6355): Control device not initialized
W/alsa_ucm( 6355): error snd_use_case_apply_mixer_controls
D/ALSADevice( 6355): close: handle 0x43d4ad40 h 0x0
D/ALSADevice( 6355): open: handle 0x43d4ad40, format 0x2
V/ALSADevice( 6355): Music case
D/ALSADevice( 6355): Device value returned is hw:0,0
V/ALSADevice( 6355): flags 0, devName hw:0,0
E/alsa_pcm( 6355): cannot open device '/dev/snd/pcmC0D0p', errno 2
V/ALSADevice( 6355): pcm_open returned fd -1
E/ALSADevice( 6355): open: Failed to initialize ALSA device 'hw:0,0'
E/AudioHardwareALSA( 6355): Device open failed
I/audio_a2dp_hw( 6355): adev_open: adev_open in A2dp_hw module
I/AudioFlinger( 6355): loadHwModule() Loaded a2dp audio interface from A2DP Audio HW HAL (audio) handle 3
I/AudioFlinger( 6355): loadHwModule() Loaded usb audio interface from SEC USB audio HW HAL (audio) handle 4
D/tms_audio_hw/AudioTmsIpc( 6355): adev_open : Enter
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsInitSilenceFrames : Enter
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsInitSilenceFrames : Exit
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerInit :Enter
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerInit: thread started with name =TerminalModeAudioServer and id = 1138011176
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerInit exit
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen :Enter
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientSetup : Enter
D/tms_audio_hw/AudioTmsIpc( 6355): initMutex: AudioClientSocketMutex Mutex Created
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientSetup : Exit
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientInit :Enter
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientInit: thread started with name =TerminalModeAudioClient and id = 1138011256
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientInit exit
D/tms_audio_hw/AudioTmsIpc( 6355): adev_open : Exit
D/tms_audio_hw/AudioTmsIpc( 6355): adev_init_check : Enter
D/tms_audio_hw/AudioTmsIpc( 6355): adev_set_master_volume : Enter 1.000000
I/AudioFlinger( 6355): loadHwModule() Loaded tms audio interface from TMS Audio HW HAL (audio) handle 5
E/AudioPolicyManagerBase( 6355): Not output found for attached devices 00000003
E/AudioPolicyManagerBase( 6355): Failed to open primary output
E/AudioPolicyManagerBase( 6355): getDeviceForStrategy() speaker device not found
E/AudioPolicyManagerBase( 6355): getDeviceForStrategy() speaker device not found
E/AudioPolicyManagerBase( 6355): getDeviceForStrategy() speaker device not found
E/AudioPolicyService( 6355): couldn't init_check the audio policy (No such device)
V/TranscoderService( 6355): TranscoderService created
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen :Enter
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen Socket Success Name /data/TMAudioSocketClient
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen Bind Success gAudioClientLocalSockFd 21
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen Listen Done gAudioClientLocalSockFd 21 ret 0
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen Socket Success Name /data/TMAudioSocketServer
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen Bind Success gAudioServerLocalSockFd 22
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen PLATFORM_AUDIO_CMD SIZE 16
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen Listen Done gAudioServerLocalSockFd 22 ret 0
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen PLATFORM_AUDIO_CMD SIZE 16
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen PLATFORM_AUDIO_DATA SIZE 24
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen PLATFORM_AUDIO_META_DATA SIZE 20
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen SizeInBytes 12288
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen : Givimg Permission 0777 mode , 0 ret
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen accept Start len 110 gAudioServerLocalSockFd 22
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen PLATFORM_AUDIO_DATA SIZE 24
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen PLATFORM_AUDIO_META_DATA SIZE 20
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen accept Start len 110 gAudioClientLocalSockFd 21
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen : Givimg Permission 0777 mode , 0 ret
W/ActivityManager( 764): Launch timeout has expired, giving up wake lock!

it maybe a hardware issue.
dial *#7353# and make test

I have a Pit Rom here
Factory_Firmware_Full_Wipe_I9505XXUBMGA_I9505OXXBMG3_NEE
and:
GT-I9505-Factory-Firmware-Full-Wipe-DBT I9505OXABMF8
But when i load that in Odin , i will become a error , invalid .....
Same is with that Rom (one File Rom)
I9505XXUBMEA_I9505OXABMEA_I9505XXUBMEA_HOME.tar.md5 is invalid
I can only flash 1 File Roms
<OSM> MD5 hash value is invalid
<OSM> PDA_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is invalid.
<OSM> End...
no sound here too , here are log Files:
E/Encryption( 187): created DirEncryptionManager
D/Vold ( 187): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
D/Encryption( 187): enable android secure container 'sdcard'
D/Vold ( 187): Volume sda state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdb state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdc state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdd state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sde state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdf state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): '/dev/block/mmcblk0' : disk_size (15758000128)
D/DirectVolume( 187): DirectVolume::readId -> path '/sys/devices/platform/msm_sdcc.2/mmc_host/mmc2/mmc2:e624/block/mmcblk1/device/cid'
D/DirectVolume( 187): DirectVolume::readId -> id '035344535530384780303189d800cab0'
D/DirectVolume( 187): DirectVolume::handleDiskAdded -> mDiskMajor 179, mDiskMinor 32, NPARTS:1
D/Vold ( 187): Volume sdcard state changing 0 (No-Media) -> 2 (Pending)
W/PackageManager( 766): Unknown permission com.sec.android.permission.VIDEOHUB in package com.sec.android.app.videoplayer
W/PackageManager( 766): Unknown permission android.permission.SYSTEM_ALERT in package com.sec.android.app.videoplayer
I have upload the LogFile, when you have time for that, you can look on that. Thanks
http://ul.to/k34sopfp

wolfsstolz said:
I have a Pit Rom here
Factory_Firmware_Full_Wipe_I9505XXUBMGA_I9505OXXBMG3_NEE
and:
GT-I9505-Factory-Firmware-Full-Wipe-DBT I9505OXABMF8
But when i load that in Odin , i will become a error , invalid .....
Same is with that Rom (one File Rom)
I9505XXUBMEA_I9505OXABMEA_I9505XXUBMEA_HOME.tar.md5 is invalid
I can only flash 1 File Roms
<OSM> MD5 hash value is invalid
<OSM> PDA_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is invalid.
<OSM> End...
no sound here too , here are log Files:
E/Encryption( 187): created DirEncryptionManager
D/Vold ( 187): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
D/Encryption( 187): enable android secure container 'sdcard'
D/Vold ( 187): Volume sda state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdb state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdc state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdd state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sde state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdf state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): '/dev/block/mmcblk0' : disk_size (15758000128)
D/DirectVolume( 187): DirectVolume::readId -> path '/sys/devices/platform/msm_sdcc.2/mmc_host/mmc2/mmc2:e624/block/mmcblk1/device/cid'
D/DirectVolume( 187): DirectVolume::readId -> id '035344535530384780303189d800cab0'
D/DirectVolume( 187): DirectVolume::handleDiskAdded -> mDiskMajor 179, mDiskMinor 32, NPARTS:1
D/Vold ( 187): Volume sdcard state changing 0 (No-Media) -> 2 (Pending)
W/PackageManager( 766): Unknown permission com.sec.android.permission.VIDEOHUB in package com.sec.android.app.videoplayer
W/PackageManager( 766): Unknown permission android.permission.SYSTEM_ALERT in package com.sec.android.app.videoplayer
I have upload the LogFile, when you have time for that, you can look on that. Thanks
http://ul.to/k34sopfp
Click to expand...
Click to collapse
sound wont work with older firmware even with the pit. you have to flash official updated firmware hard reset your device.also make sure its your phones official firmware.if that don't work try kies emergency firmware upgrade. hope this helps.

[SOLVED][Q] Commands not properly executing

EDIT:
The problem was that i was trying to read a line from the inputreader, when there was no line, so it was waiting for a response there...
Hello,
I am currently building an app to fix a little problem that exists on some devices with the wifi-mac and bluetooth addresses constantly changing (for me it's a N4 but I read somewhere that there are other devices with that problem too)
The thing the app should do is (steps taken from another xda thread: http://forum.xda-developers.com/showpost.php?p=43164157&postcount=1 )
- Mount /persist
- create the folders wifi and bluetooth
- create a text file in each of these directories containing the addresses that should be used in future
- fix the owners and permissions of these files and directories
- execute /system/bin/conn_init as su
The app is mostly done but somehow not working at all.
Everything from generating random adresses to saving them in a temporary file seems to work fine, but as soon as I try to mount the persist directory, the app stops to react.
At first, this was the first thing done by the SU Shell class that I wrote for executing su shell commands, so I thought that might be not working, but when I let that execute echo test it returns test just fine...
The code that is used could be expressed like that (this is missing some debug info and strings that get passed, but it should technically have the same result):
Code:
try {
shell = Runtime.getRuntime().exec("su");
outputStream = new DataOutputStream(shell.getOutputStream());
inputStream = new BufferedReader(new InputStreamReader(shell.getInputStream()));
outputStream.writeBytes("mount /dev/block/mmcblk0p20 /persist");
outputStream.flush();
} catch (IOException e) {
e.printStackTrace();
}
The attached zip file contains my main activity and the before mentioned su shell.
The complete source code of the app is available via my git server: http://greensserver.redirectme.net/greenchris/WiFi-MAC-and-Bluetooth-Adress-Fix.git
Does anybody have an idea why this isn't working?
Greetings
GreenChris
Edit:
I forgot to add the logcat...
Code:
04-09 23:33:21.289 3903-3903/com.janchristiangruenhage.macfixer I/art﹕ Late-enabling -Xcheck:jni
04-09 23:33:21.791 3903-3949/com.janchristiangruenhage.macfixer D/OpenGLRenderer﹕ Render dirty regions requested: true
04-09 23:33:21.797 3903-3903/com.janchristiangruenhage.macfixer D/Atlas﹕ Validating map...
04-09 23:33:21.951 3903-3949/com.janchristiangruenhage.macfixer I/Adreno-EGL﹕ : QUALCOMM Build: 10/28/14, c33033c, Ia6306ec328
04-09 23:33:21.953 3903-3949/com.janchristiangruenhage.macfixer I/OpenGLRenderer﹕ Initialized EGL, version 1.4
04-09 23:33:21.985 3903-3949/com.janchristiangruenhage.macfixer D/OpenGLRenderer﹕ Enabling debug mode 0
04-09 23:33:22.318 3903-3903/com.janchristiangruenhage.macfixer I/Timeline﹕ Timeline: Activity_idle id: [email protected] time:14543691
04-09 23:33:31.781 3903-3919/com.janchristiangruenhage.macfixer I/art﹕ Background sticky concurrent mark sweep GC freed 11333(680KB) AllocSpace objects, 3(44KB) LOS objects, 13% free, 4MB/5MB, paused 5.706ms total 39.550ms
04-09 23:33:31.843 3903-3903/com.janchristiangruenhage.macfixer D/macfixer﹕ address-bytes generated
04-09 23:33:43.923 3903-3903/com.janchristiangruenhage.macfixer D/macfixer﹕ save .bdaddr
04-09 23:33:43.925 3903-3903/com.janchristiangruenhage.macfixer D/macfixer﹕ address written: .bdaddr
04-09 23:33:43.954 3903-3903/com.janchristiangruenhage.macfixer D/macfixer﹕ su shell started
04-09 23:33:43.955 3903-3903/com.janchristiangruenhage.macfixer D/macfixer﹕ added outputstream
04-09 23:33:43.957 3903-3903/com.janchristiangruenhage.macfixer D/macfixer﹕ added inputstreamreader
04-09 23:33:43.957 3903-3903/com.janchristiangruenhage.macfixer D/macfixer﹕ echo test
04-09 23:33:43.973 3903-3903/com.janchristiangruenhage.macfixer D/macfixer﹕ test
04-09 23:33:43.974 3903-3903/com.janchristiangruenhage.macfixer D/macfixer﹕ mount /dev/block/mmcblk0p20 /persist

Segmentation Fault in all customs ROMs

The Segmentation Fault error is fixed on LineageOS. It will be fixed progressively in any other ROM in the upcoming updates.
Infinite thanks to @wzedlare, and the other persons and devs that helped us. Im gonna request to mods to close this thread
And over again thanks to all! I'm so happy now!
On certain devices a series of binaries, shell/ADB commands are not working correctly.
Most of the time when one of these binaries I invoked the crash with a "Segmentation fault" error (SIGEGV 11). If the command/binarie is executed multiple times, at some point it works without the error. (1 of 30 times approximately).
These commands/binaries are very important for Root applications, but are not limited to them.
As a result many applications that need ROOT work very sporadically, and some not root apps are affected too.
If you are suffering the same problem, please share your logcats, the app or the command affected, and your device model, in order to get more information about the problem to help the devs and other users.
Affected ROMs and Devices ​
So far all customs ROMs for Cedric are affected. It appears to be related to a Cedric variant with Dual SIM, removable battery and 3GB of RAM. Mostly sold in Europe trough Amazon.
Known affected apps and Workarrounds:​
SuperSu and MagikSU(all versions): Devices rooted with Magisk or SuperSu, suffer from the error almost every time that SU binarir is invoked. The visible symptom is that although according the info provided by the application (Magisk manager says that the device is correctly rooted), the requests to get root permission will not popup because the binarie is crash almost 29 to 30 times. As a result these options for root are almost useless.
LineageOS SU By itself works correctly, the binarie will not crash, but the other commands still will be affected. Is the most funtional root option for affected devices!!
Secure Settings, BetterBattery stats, AutoTools ADB commands to Grant permissions can be executed multiple times. Once authorized, they work correctly.
Super Doze To change doze settings you need to press apply button multiple times. There is no way to know when the change was actually applied except using ADB.
Nap Time it's useless to change doze settings, but force doze is working.
Greenify, Servicely The will pop out an error every time that trying to stop every single app. In short they are useles.
Titanium BackUp and Link2SD To freeze or unfreeze an app you must tap multiples times until it work.
Disable Services Tap multiple times until it work.
LiveBoot After installed it will work only 1/30 reboots (Useless)
Known affected binaries​
pm
am
settings
adb backup
Magisk Su, and Super Su
Disclaimer​:
I'm not a developer. I created this topic to help other users, to find a workarounds to the error. I'm not a developer. I created this topic to help other users, to find a way to dodge the error.
In addition I hope to raise awareness about this problem and help the devs with the information that is recopiled.
Screenshots Examples and Logcats of the error​
Logcat: http://cloud.tapatalk.com/s/59...279dd2/2017-07-25-12-12-33.txt
Series of post in LineageOS Thread talking about the issue: https://forum.xda-developers.com/g5/development/7-1-x-lineageos-14-1-moto-g5-t3611973/page48
Tipical Crash message after invoking a command:
Code:
08-23 19:04:28.670 12408 12408 I chatty : uid=0(root) app_process expire 847 lines
08-23 19:04:28.694 11748 11748 W Atfwd_Sendcmd: AtCmdFwd service not published, waiting... retryCnt : 4
08-23 19:04:28.715 12408 12408 F libc : Fatal signal 11 (SIGSEGV), code 1, fault addr 0x9c in tid 12408 (app_process)
08-23 19:04:28.716 402 402 I chatty : uid=0(root) /system/bin/debuggerd expire 2 lines
08-23 19:04:28.777 12410 12410 F DEBUG : *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
08-23 19:04:28.778 12410 12410 F DEBUG : LineageOS Version: '14.1-20170811-UNOFFICIAL-cedric'
08-23 19:04:28.778 12410 12410 F DEBUG : Build fingerprint: 'motorola/lineage_cedric/cedric:7.1.2/NJH47F/43d07c81c5:userdebug/test-keys'
08-23 19:04:28.778 12410 12410 F DEBUG : Revision: '0'
08-23 19:04:28.778 12410 12410 F DEBUG : ABI: 'arm'
08-23 19:04:28.778 12410 12410 F DEBUG : pid: 12408, tid: 12408, name: app_process >>> app_process
[/Quote]
Click to expand...
Click to collapse

Great thread! My device is also affected and matches the mentioned specs.

I've got the recommended LineageSU method installed but normally don't use ADB. The only application I did try to use is Liveboot, where the test mode fails to start quite often. Transferring files via USB won't work on the first try, but I don't know how to tell if that is related. My device also is the European G5 with triple slot, 16GB and removable battery, type XT1676 or M2675. Currently running the unofficial LineageOS 14.1 build by @wzedlare from August, 2017.

ektus said:
I've got the recommended LineageSU method installed but normally don't use ADB. The only application I did try to use is Liveboot, where the test mode fails to start quite often. Transferring files via USB won't work on the first try, but I don't know how to tell if that is related. My device also is the European G5 with triple slot, 16GB and removable battery, type XT1676 or M2675. Currently running the unofficial LineageOS 14.1 build by @wzedlare from August, 2017.
Click to expand...
Click to collapse
The easiest way to check if a problem is caused by the segmentation fault is open a terminal emulator session (you can install any terminal emulator from the Playstore), and write:
su
logcat | grep "signal 11 (SIGSEGV)"
It will filter the logcat showing the Segmentation Fault errors. If you get new errors when performing an certain action, or opening certain app, it's affected by the error.
Enviado desde mi Moto G5 mediante Tapatalk

The easiest way to check if a problem is caused by the segmentation fault is open a terminal emulator session (you can install any terminal emulator from the Playstore), and write:
su
logcat | grep "signal 11 (SIGSEGV)"
Click to expand...
Click to collapse
That one shows quite a number of results, at a first glance most with
Code:
signal 11 (SIGSEGV), code 1 (SEGV_MAPPER), fault addr 0x9c in tid xxxxx (zygote)
and one of each with
Code:
(app_process)
and
Code:
(Downloadmanager)
The fault addr is always the same except for the Downloadmanager where it's
Code:
code 2 (SEGV_ACCERR), fault addr 0x200006464
.
Regards
Ektus.

Just for reference and to add to the discussion started in the Moto G5 TWRP thread, I never had any such issuess. My model is the 3GB dual sim version, bought at Amazon Germany. LineageOS with root addon.

Don't know if it is of importance but it never got to boot a clean system with changed filesystem. Tried to change /data to ext4, also tried it with /system as f2fs but nothing worked. This also happened with the new TWRP 3.1.1.
I also tried to flash phh supersu with noverity. But could only boot to bootloader which gave me an error.
Just wanted to share my attempts. I have limited knowledge of the fundamentals of segmentation so I just tried whatever I could find.

floydburgermcdahm said:
Just for reference and to add to the discussion started in the Moto G5 TWRP thread, I never had any such issuess. My model is the 3GB dual sim version, bought at Amazon Germany. LineageOS with root addon.
Click to expand...
Click to collapse
F***! what will be the difference between your device and mine?
Did you ever use the rooted stock ROM?
Can you please, share these numbers from the sticker behind your battery, to know your exact device variant:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for your help!
Enviado desde mi Moto G5 mediante Tapatalk

Anyone affected with segmentation fault error, o with a device with Dual SIM, please share these numbers.
A picture is not necessary, just the numbers. It's behind the battery
Enviado desde mi Moto G5 mediante Tapatalk

Here is mine.
Edit: if picture is too small, it is the same phone as yours...

Just for reference my phone doesn't have any issues with root function
XT1675
2+16gb
All other numbers are the same
The FCC ID is the registration code for the United States
Federal Communications Commission
First three letters are grantee code - the rest is product code
I think the type relates to the battery size

mrfrantastic said:
Here is mine.
Edit: if picture is too small, it is the same phone as yours...
Click to expand...
Click to collapse
Let's see if @floydburgermcdahm has exactly the same device. Perhaps there is more than one 3gb Dual SIM Variant.
floydburgermcdahm said:
I never had any such issuess. My model is the 3GB dual sim version, bought at Amazon Germany. LineageOS with root addon.
Click to expand...
Click to collapse
Enviado desde mi Moto G5 mediante Tapatalk

andyro2008 said:
Let's see if @floydburgermcdahm has exactly the same device. Perhaps there is more than one 3gb Dual SIM Variant.
Click to expand...
Click to collapse
Mine is: XT1676, 3+16GB, FCC ID: IHDT56VF4, Type: M2675
So, no idea what the difference between our devices might be. I did use the stock ROM briefly, but never rooted it. Went straight to LOS with root addon.
Yeah and thanks for reminding me that the bloody case is a ***** to open!

floydburgermcdahm said:
Mine is: XT1676, 3+16GB, FCC ID: IHDT56VF4, Type: M2675
So, no idea what the difference between our devices might be. I did use the stock ROM briefly, but never rooted it. Went straight to LOS with root addon.
Yeah and thanks for reminding me that the bloody case is a ***** to open!
Click to expand...
Click to collapse
So if you type "pm" in a terminal you don't get a segmentation fault?

TheFixItMan said:
Just for reference my phone doesn't have any issues with root function
XT1675
2+16gb
All other numbers are the same
The FCC ID is the registration code for the United States
Federal Communications Commission
First three letters are grantee code - the rest is product code
I think the type relates to the battery size
Click to expand...
Click to collapse
I tried a strace with the command "pm". Something of this can be useful? Can it be something related to libraries? Those "No such file or directory" are weird. The full log files, one from a successfull pm and another for a failed one, are attached. Thanks for your atention, i hope you could help us.
Code:
openat(AT_FDCWD, "/system/lib/libart.so", O_RDONLY|O_LARGEFILE) = 5
fstat64(5, {st_mode=0, st_size=1, ...}) = 0
read(5, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\0\0\0\0004\0\0\0"..., 4096) = 4096
_llseek(5, 5888928, [5888928], SEEK_SET) = 0
read(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 1320
_llseek(5, 4584364, [4584364], SEEK_SET) = 0
read(5, "\0.symtab\0.strtab\0.shstrtab\0.inte"..., 4096) = 4096
_llseek(5, 4584348, [4584348], SEEK_SET) = 0
read(5, "libart.so\0\0\0\21\r\350\370\0.symtab\0.strtab"..., 4096) = 4096
close(5) = 0
openat(AT_FDCWD, "/system/lib/.debug/libart.so", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/lib/debug/system/lib/libart.so", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
clock_gettime(CLOCK_MONOTONIC, {7390, 135831818}) = 0
openat(AT_FDCWD, "/system/lib/libandroid_runtime.so", O_RDONLY|O_LARGEFILE) = 5
fstat64(5, {st_mode=0, st_size=1, ...}) = 0
mmap2(NULL, 1075276, PROT_READ, MAP_PRIVATE, 5, 0) = 0xaaada000
close(5) = 0
openat(AT_FDCWD, "/system/lib/libandroid_runtime.so", O_RDONLY|O_LARGEFILE) = 5
fstat64(5, {st_mode=0, st_size=1, ...}) = 0
read(5, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\0\0\0\0004\0\0\0"..., 4096) = 4096
_llseek(5, 1074116, [1074116], SEEK_SET) = 0
read(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 1160
_llseek(5, 1073810, [1073810], SEEK_SET) = 0
read(5, "\0.shstrtab\0.interp\0.note.android"..., 4096) = 1466
_llseek(5, 1073782, [1073782], SEEK_SET) = 0
read(5, "libandroid_runtime.so\0\0\0o\223i\206\0.sh"..., 4096) = 1494
close(5) = 0
openat(AT_FDCWD, "/system/lib/libandroid_runtime.so", O_RDONLY|O_LARGEFILE) = 5
fstat64(5, {st_mode=0, st_size=1, ...}) = 0
read(5, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\0\0\0\0004\0\0\0"..., 4096) = 4096
_llseek(5, 1074116, [1074116], SEEK_SET) = 0
read(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 1160
_llseek(5, 1073810, [1073810], SEEK_SET) = 0
read(5, "\0.shstrtab\0.interp\0.note.android"..., 4096) = 1466
_llseek(5, 1073782, [1073782], SEEK_SET) = 0
read(5, "libandroid_runtime.so\0\0\0o\223i\206\0.sh"..., 4096) = 1494
close(5) = 0
openat(AT_FDCWD, "/system/lib/.debug/libandroid_runtime.so", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/lib/debug/system/lib/libandroid_runtime.so", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/system/bin/app_process32", O_RDONLY|O_LARGEFILE) = 5
fstat64(5, {st_mode=0, st_size=1, ...}) = 0

Sorry repeated post

andyro2008 said:
I tried a strace with the command "pm". Something of this can be useful? Can it be something related to libraries? Those "No such file or directory" are weird. The full log files, one from a successfull pm and another for a failed one, are attached. Thanks for your atention, i hope you could help us.
Code:
openat(AT_FDCWD, "/system/lib/libart.so", O_RDONLY|O_LARGEFILE) = 5
fstat64(5, {st_mode=0, st_size=1, ...}) = 0
read(5, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\0\0\0\0004\0\0\0"..., 4096) = 4096
_llseek(5, 5888928, [5888928], SEEK_SET) = 0
read(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 1320
_llseek(5, 4584364, [4584364], SEEK_SET) = 0
read(5, "\0.symtab\0.strtab\0.shstrtab\0.inte"..., 4096) = 4096
_llseek(5, 4584348, [4584348], SEEK_SET) = 0
read(5, "libart.so\0\0\0\21\r\350\370\0.symtab\0.strtab"..., 4096) = 4096
close(5) = 0
openat(AT_FDCWD, "/system/lib/.debug/libart.so", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/lib/debug/system/lib/libart.so", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
clock_gettime(CLOCK_MONOTONIC, {7390, 135831818}) = 0
openat(AT_FDCWD, "/system/lib/libandroid_runtime.so", O_RDONLY|O_LARGEFILE) = 5
fstat64(5, {st_mode=0, st_size=1, ...}) = 0
mmap2(NULL, 1075276, PROT_READ, MAP_PRIVATE, 5, 0) = 0xaaada000
close(5) = 0
openat(AT_FDCWD, "/system/lib/libandroid_runtime.so", O_RDONLY|O_LARGEFILE) = 5
fstat64(5, {st_mode=0, st_size=1, ...}) = 0
read(5, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\0\0\0\0004\0\0\0"..., 4096) = 4096
_llseek(5, 1074116, [1074116], SEEK_SET) = 0
read(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 1160
_llseek(5, 1073810, [1073810], SEEK_SET) = 0
read(5, "\0.shstrtab\0.interp\0.note.android"..., 4096) = 1466
_llseek(5, 1073782, [1073782], SEEK_SET) = 0
read(5, "libandroid_runtime.so\0\0\0o\223i\206\0.sh"..., 4096) = 1494
close(5) = 0
openat(AT_FDCWD, "/system/lib/libandroid_runtime.so", O_RDONLY|O_LARGEFILE) = 5
fstat64(5, {st_mode=0, st_size=1, ...}) = 0
read(5, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\0\0\0\0004\0\0\0"..., 4096) = 4096
_llseek(5, 1074116, [1074116], SEEK_SET) = 0
read(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 1160
_llseek(5, 1073810, [1073810], SEEK_SET) = 0
read(5, "\0.shstrtab\0.interp\0.note.android"..., 4096) = 1466
_llseek(5, 1073782, [1073782], SEEK_SET) = 0
read(5, "libandroid_runtime.so\0\0\0o\223i\206\0.sh"..., 4096) = 1494
close(5) = 0
openat(AT_FDCWD, "/system/lib/.debug/libandroid_runtime.so", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/lib/debug/system/lib/libandroid_runtime.so", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/system/bin/app_process32", O_RDONLY|O_LARGEFILE) = 5
fstat64(5, {st_mode=0, st_size=1, ...}) = 0
Click to expand...
Click to collapse
Both them lib files are present in system/lib
I don't have any knowledge of coding to be of assistance

mrfrantastic said:
So if you type "pm" in a terminal you don't get a segmentation fault?
Click to expand...
Click to collapse
Nope.

Since we only have a very small number of affected devices it is obviously difficult to extrapolate general statements. But for now(!) it seems(!) that there are models which are not affected by the fault although they match (on first glance) OP's and my phone's specs. On the other hand there are (again: for now) only devices with above mentioned serial number affected by the fault.
Since we tried different ROMS with different sources could it be kernel related? I am assuming that all ROMS at least partially share the same kernel. And if so, how do we get someone to try to fix the kernel?
The next common denominator might be either TWRP or SU...

At least Xposed is NOT affected in any way by the Segmentation fault error, so you can use it without problem.
Enviado desde mi Moto G5 mediante Tapatalk

Redmi 3s prime random restart

I am having issue of random restart of my redmi 3s prime.so far searched many blog it has been reported as a hardware fault & to solve is to replace main board. The restart is also random & i am not able to reproduce it at my own will however i have noticed few things
Phone doesn't restart while it is IDLE[/B]
Phone doesn't restart while it charging
so am thinking changing the battery might solve the issue as i have been using the phone since 3 years & phone was working fine in initial years. I am also attaching the full bug report. Kindly help
BUG REPORT
can't find the pid
Failed to find: /data/misc/anrd/
Skipping systrace because '/sys/kernel/debug/tracing/tracing_on' content is '0'
/data/misc/raft does not exist or is not a directory
Adding dir /cache/recovery (recursive: 1)
Duration of '/cache/recovery': 0.010s
Adding dir /data/misc/recovery (recursive: 1)
Duration of '/data/misc/recovery': 0.002s
Adding dir /data/misc/logd (recursive: 0)
Duration of '/data/misc/logd': 0.001s
Adding dir /data/misc/profiles/cur (recursive: 1)
Duration of '/data/misc/profiles/cur': 0.117s
Adding dir /data/misc/profiles/ref (recursive: 1)
Duration of '/data/misc/profiles/ref': 0.015s
MOUNT INFO: 50 entries added to zip file
Duration of 'MOUNT INFO': 0.098s
/sys/block/zram0: Permission denied
Skipping 'lsmod' because /proc/modules does not exist
Adding dir /data/misc/bluetooth/logs (recursive: 1)
Duration of '/data/misc/bluetooth/logs': 0.000s
taking late screenshot
drop_root_user(): already running as Shell
Screenshot saved on /data/user_de/0/com.android.shell/files/bugreports/bugreport-lineage_land-OPM7.181205.001-2019-03-23-14-43-03.png
logcat read failure
*** command 'logcat -L -b all -v threadtime -v printable -v uid -d *:v' failed: exit code 1
AddAnrTraceDir(): dump_traces_file=/data/anr/dumptrace_MF3dpz, anr_traces_dir=/data/anr
Dumping current ANR traces (/data/anr/dumptrace_MF3dpz) to the main bugreport entry
Error unlinking temporary trace path /data/anr/dumptrace_MF3dpz: Permission denied
execvp on command 'parse_radio_log /proc/last_radio_log' failed (error: Permission denied)
*** command 'parse_radio_log /proc/last_radio_log' failed: exit code 1
No IDumpstateDevice implementation
Error dumping service info: (Unknown error -2147483646) android.hardware.fingerprint.IFingerprintCustomDaemon
Can't find service: android.service.gatekeeper.IGateKeeperService
Error dumping service info: (Unknown error -2147483646) installd
Error dumping service info: (Unknown error -2147483646) storaged
Adding main entry (bugreport-lineage_land-OPM7.181205.001-2019-03-23-14-43-03.txt) from /data/user_de/0/com.android.shell/files/bugreports/bugreport-lineage_land-OPM7.181205.001-2019-03-23-14-43-03.tmp to .zip bugreport
dumpstate id 1 finished around 2019/03/23 14:44:48 (105 s)
Adding zip text entry main_entry.txt
dumpstate_log.txt entry on zip file logged up to here
Removing temporary file /data/user_de/0/com.android.shell/files/bugreports/bugreport-lineage_land-OPM7.181205.001-2019-03-23-14-43-03.tmp
Vibrate: 'cmd vibrator vibrate 75 dumpstate'
Vibrate: 'cmd vibrator vibrate 75 dumpstate'
Vibrate: 'cmd vibrator vibrate 75 dumpstate'
Final bugreport path: /data/user_de/0/com.android.shell/files/bugreports/bugreport-lineage_land-OPM7.181205.001-2019-03-23-14-43-03.zip
Sending broadcast: '/system/bin/cmd activity broadcast --user 0 --receiver-foreground --receiver-include-background -a com.android.internal.intent.action.BUGREPORT_FINISHED --receiver-permission android.permission.DUMP --ei android.intent.extra.ID 1 --ei android.intent.extra.PID 5632 --ei android.intent.extra.MAX 6135 --es android.intent.extra.BUGREPORT /data/user_de/0/com.android.shell/files/bugreports/bugreport-lineage_land-OPM7.181205.001-2019-03-23-14-43-03.zip --es android.intent.extra.DUMPSTATE_LOG /data/user_de/0/com.android.shell/files/bugreports/bugreport-lineage_land-OPM7.181205.001-2019-03-23-14-43-03-dumpstate_log-5632.txt --es android.intent.extra.SCREENSHOT /data/user_de/0/com.android.shell/files/bugreports/bugreport-lineage_land-OPM7.181205.001-2019-03-23-14-43-03.png'
drop_root_user(): already running as Shell
Broadcasting: Intent { act=com.android.internal.intent.action.BUGREPORT_FINISHED flg=0x11400000 (has extras) }
Broadcast completed: result=0
Final progress: 6115/6135 (estimated 6135)
Saving stats (total=12250, runs=2, average=6125) on /data/user_de/0/com.android.shell/files/bugreports/dumpstate-stats.txt
done (id 1)