ATT Galaxy S4 currently running Goldeneye 6.0 and TWRP 2.6.0.0 (never installed MF3 base, but have tried both MF3 and MDL modems)
First odd thing...
[About->Status->Device Status] is listed as "Sd card" instead of the more common "Official" or "Custom".
Anybody know what that means or is telling me?
This is the latest thing I've noticed with my phone, which has been having all sorts of issues lately that I cannot seem to figure out. My main problem is, I can reinstall a new ROM, boot into the ROM, change settings around, reboot just fine, but, as soon as I install anything from the Play Store, the next reboot will hang on the initial Samsung splash screen. Wiping is the only fix I've found, and fixing permissions in TWRP errors out with an error that it cannot chown one of the new/updated .apk files.
Both Goldeneye 5 and 6 are doing this now (5.0 was installed and rock solid for several weeks before this all showed up...it started sometime after I decided to try out a couple of the aroma roms and then came back to GE).
Used ODIN to go back to factory rom, re-rooted/installed TWRP, then reinstalled GE6.0, but the same thing happened. Everything looked good until I ran updates from the store, then I was stuck again (note: used Root Explorer to check to permissions on the updated apks before rebooting and they were all correct (755)).
Other things I've noticed are:
1. Sometimes, on any reboot, the startup locks at the initial Samsung screen and I have to long press the power button to get it to reboot. It usually boots the second time around (this is before I install any additional apps and am completely unable to reboot).
2. Sometimes when wiping cache, davlik, and/or data, TWRP will seem to hang for up to a minute when trying to initialize the partition. A couple of times it even hard reboot my phone when I did a cache+davlik wipe.
3. I rolled back to a recovery image just fine; however, it was a couple months old. Everything started off looking great, but once I updated to a new ROM, my issues returned.
Trying Heimdall to go back to factory; however, I'm having issue with my laptop and getting the Zadig drivers installed. While I'm working that out, figured I'd see if anyone else has any suggestions on what else I should be trying or looking out.
thx
I would flash your phone back to MDL stock with odin using the mdl tar. This should format your paritions correctly. You could also reinstall MDL using kies since they still don't support MF3.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Related
Ok, talk to me like I'm an idiot about this stuff, because apparently I am.
I decided to root using chainfire autoroot, and that was successful, aside from a couple weird things like my UCCW widgets suddenly not stretching fully across the desktop, and what seemed like some new lag. I then flashed slimbean. My contacts didn't restore from google or anywhere, and my sd card seemed to be having problems. I then decided to flash blue kaban or whatever, and that straight up wouldn't boot. However, at that point my sd card fully stopped working, and that is the place I had the slimbean zip. So I did not have a working rom on my phone.
So what I decided to do was unroot and start from scratch. I used the method in this video on youtube by qbking
The result is that my wifi is not working and I have a persistent notification that says Prevention information the device has detected an application attempting etc.
Also software version is MDL, Baseband version is MDL, and Build number is MDC. I was under the impression that they would all be MDC and it would automatically push the MDL but apparently I suck.
My ultimate goal is get back to pure out-of-the-box stock so I can start the rooting process over and try flashing something stable again. But abviously the most important thing right now is to get the wifi working and (I think) the Basbeband and build numbers to match. But I don't know. Please help me. Please. I beg of thee.
ok so after an hour or so it pushed the update to me and my wifi is now working, and everything is MDL. The SD card still says damaged and my contacts aren't there. Any ideas on why those two things would be casualties of rooting and flashing?
I've got the same problem after flashing back to stock from some rom. Would you mind telling me how you got the wifi to work and that notification to go away? I'm not getting an update.
Did the SD card problem happen afterwards? Did you do a factory reset and delete data before you reflashed it? Sometimes when you flash over a partial thing system apps get corrupted.
I have actually performed this and had this happen a few times. What I have found thay it does on some devices is will not properly install random MDL firmware(Saw MDL Firmwares In Settings Still Being Reported). So what I found to be the proper steps for me is before installing any ODIN tarballs thatcare firmware based besides rec9eries are to boot into Recovery and wipe "System, Data, Dalvik, Cache and Preload(Dont Know Why All Of Those) then immediately reboot into Download Mode, install tarball and then when it reboots I go ahead and let it go into recovery and do what it wanrs and when it reboots from stock recovery I hold vokume down to go into download mode and if it says Samsung Official/Official for both options then you are set but if not then I reinstall tarball while I am already in Download Mode again. It happens literally every time I ODIN back to bone stock. I have had to do it at the most 2 extra times after the initial ODIN install.
Sent from my SPH-L720 using Tapatalk 4 Beta
---------- Post added at 12:06 AM ---------- Previous post was at 12:04 AM ----------
Now, I also do go ahead and after initial install of tarball go into OS and if I dont have working wifi then I go ahead and do an FDR while I am in the OS just in case even though should helo whatsoever lol then start going to download mode to check Recovery and Software Status.
Sent from my SPH-L720 using Tapatalk 4 Beta
Brains, did you ever get it to work?
Sent from my SPH-L720 using Tapatalk 4 Beta
What I want to do is install a stock non rooted rom, kernel, and recovery. I am not sure how to change recovery to stock either is it like flashing a rom? Please give me some links for these I can't seem to find them, besides the stock kernel I found that.
----------------------------------------------------------------------------------The reason I want the above is bellow, if it matters.-----------------------------------------------------
My phone is about 95% broken.
Before, every rom/kernel combination would randomly restart, it was my phone it self I believe.
I went to a stock rooted rom, but then it restarted, and my lock screen worked, yet my home screen was black all i could do was slide my status bar down.
After that i restarted my self and then it got stock forever on the screen where it says Samsung galaxy s4.
The 5% working part is my recovery, for the most part.
I keep having to do a full wipe, not just system wipe otherwise it says error unable to mount preload or i/o or a few other things, I have to system wipe before every rom attempt.
I tried several popular roms such as sacs and triforce and a few other roms and all the kernels also.
The phone will turn on, work for a little normally, then crash again and go into the infinite loading screen where is simply says galaxy s4.
This phone is only 3 months old, so I want to take it back to sprint being completely stock so they give me a new phone.
I need links to files I need, and if i am forgetting to change anything back to stock please let me know. Thank you.
I replied to you in the newbie thread, but to return to complete stock download the latest firmware from here: http://www.sammobile.com/firmwares/ and install it with odin. Do a factory reset before and after install to make sure you have cleared out what ever is causing your problems. After this process you will be completely stock and unrooted. If you are still having problems after this it is probably hardware related.
Hey XDA, just a long time stalker who has finally given up trying to find his solution on already posted items (I think 10 hours of trail and error means I'm not gonna catch what I'm failing to see...)
When I first got my galaxy s4 I downloaded KangaBean and it was on 4.2.2 I believe. Today I decided I should upgrade to 4.4.2 since I've only been hearing good things about it, and I wanted the slight updates that came with it.
Well, I have a AT&T s4, sgh-i337 that was on CWM 6 when I tried updating to another ROM, the first one I tried was GOOGLE EDITION 4.4.2 BY DANVDH. Did a wipe, cache, dalvik, format system, flashed it, flashed loki doki, said no to re-root/root fix prompt that followed, then I came to the yellow triangle, I thought that was odd, believed I missed something.
So, I downloaded TWRP 2.5.0.2 like the thread suggested, tried again, no luck. Then I tried Unoffical Carbon KitKat, which just caused the "Samsung Custom" logo to stay on indefinitely (I let it sit for 40 minutes before giving up.) After 2 failed ROMs, I tried KangaKat, updated version of KangaBean, so it should be just dandy right? Narp, same luck. This one boots, then reboots into recovery.
At this point I considered myself to be stupid in some way so obvious that I would die before I noticed it. So, then I just flashed the stock firmware thats like 2.5 gb through odin, re-rooted and installed CWM 6.0.4.4 LOKI'd and tried to flash KangaKat, being confident it would work this time, again I got boot to the logo and then reboot into recovery.
At this point I attempted the other 2 ROMs again, multiple times.
After some sobbing, I re-did the stock firmware, tried again, failed again.
My sadness turned into rage, I just destroyed one of my micro sd to usb-s because it was being annoying and I was annoyed, I took a picture and got over it.
I tried a 3rd time with the re-flashing stock firmware and tried with twrp again, no cigar.
Now, after MANY hours and MANY false hopes... I shall be using my blackberry and hoping to return to android soon, if somebody can help me figure out what I'm missing. Many thanks ahead!
Did you do lokidoki after?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Did you doa hard reboot clear the cache and davlik after it got stuck on the lock screen ? It seems odd that it would just not boot up at all. I was about to wonder if maybe it was the CM kernel bug that will keep it from booting past the initial screen but you tried aGE rom so...
It's been awhile since I changed anything on this phone, I've been running CM11 with no issues. The wife was playing with my phone which is on cm12 and wanted me to upgrade it. Great, I hate having to touch her phone but ok.
1. Did a straight upgrade to CM12 nightly (couple nights ago build) with gapps from CM site. After the install everything crashes on the initial load, it's like the baseband is jacked and doesn't know how to handle the new google play services because everything crashes.
2. Went back and wiped internal everything this time, re installed nightly and gapps. No change.
3. Tried step 2 a couple more times and different gapps from PA and other random sites (micro, light, stock versions) and then TWRP just died on me. It's asking for a password when I first go in so now I'm stuck there. Tried to use ODIN to install the latest TWRP after converting it with another script found here (i'll find the link).
so, I'm probably going to have to use ODIN to restore some stock version of S4 ATT but I really don't know which one is stock that would work with CM12. I don't want to get caught in the safestrap crap of dual boot and whatever else. Any help is greatly appreciated.
You'll need to Odin the mdl firmware in Odin. Be careful as it will want to update itself after you flash it. See sammobile.com for the firmware.
Sent from my Nexus 9 using XDA Free mobile app
Awesome, thanks!
Flashed the stock, towelroot, twrp from google play and cm12 nightly. Perfect and back where I left off. Thanks!!
Ok.. I did a bad thing I guess. after working for a couple weeks I tried to reset the phone while cm12.1 was installed. All it did was keep restarting TWRP and was stuck there. So I figured there was an issue with the twrp install or something whatever, I went to flash back to stock mdl in odin. Instead of selecting PDA I selected Phone and it failed on the first attempt. Then I selected PDA and it installed correctly (Said passed). Now I'm stuck on the AT&T logo on boot. I tried to reinstall the stock rom again and the same results. Where do I go from here??!?
kronikwisdom said:
Ok.. I did a bad thing I guess. after working for a couple weeks I tried to reset the phone while cm12.1 was installed. All it did was keep restarting TWRP and was stuck there. So I figured there was an issue with the twrp install or something whatever, I went to flash back to stock mdl in odin. Instead of selecting PDA I selected Phone and it failed on the first attempt. Then I selected PDA and it installed correctly (Said passed). Now I'm stuck on the AT&T logo on boot. I tried to reinstall the stock rom again and the same results. Where do I go from here??!?
Click to expand...
Click to collapse
Boot into the stock recovery and do a factory reset
Sent from my Nexus 9 using XDA Free mobile app
Ok, factory reset worked on the second try. Sent it in to a boot loop on the first go around, odd. Thanks!
So, I have gotten myself in a bit of a pickle I however think I can get out of it by sideloading using EXT. SD, Im not sure what to flash to solve the dillemma however. So this is the situation. I have a (had) a rooted Galaxy s4 (sgh-i337 ucufnc1) with 4.4.2 android. It had safestrap installed and back ups of everything else in sd card and other locations just in case. The phone was acting buggy, so I formatted the phone with safestrap, the problem persisted, ill get into the issue a bit further down. So I booted back into safestrap, and did a complete wipe, however my sd card must've bumped out, because it didnt delete any media files or so it said, and then after the wipe it crashed. and refuses to boot into safestrap or even past the splash logo. I can get into download mode, but usb debugging isnt on anymore since i wiped it, I can get into the other mode as well ( cant for the life of me remember the name of it atm although i use it frequently) with some luck. I also happen to have all .md5 files from a backup i did about 4 months ago in tact, I cannot for the life of me get them to convert properly to apply them to the phone without safestrap however, if anyone has any insight to this please let me know also.
I can/will list any other information I have if anyone needs it, and if anyone can help it would safe a life!
The reason i reformatted it to begin with, was because media would stall, and when i plugged in the audio jack it'd freeze the entire app using it, then the whole phone would freeze. I believe it was due to lucky patcher but im unsure. The issue began when I altered the auto update file, and even after i rectified it, it persisted. At this time i have a phone soft bricked because it didnt delete all the media files and I assume something bugged onto the kernel image but Im not sure. If I can simply try to restore it to stock kernel then im fine with that.
Ghujii said:
So, I have gotten myself in a bit of a pickle I however think I can get out of it by sideloading using EXT. SD, Im not sure what to flash to solve the dillemma however. So this is the situation. I have a (had) a rooted Galaxy s4 (sgh-i337 ucufnc1) with 4.4.2 android. It had safestrap installed and back ups of everything else in sd card and other locations just in case. The phone was acting buggy, so I formatted the phone with safestrap, the problem persisted, ill get into the issue a bit further down. So I booted back into safestrap, and did a complete wipe, however my sd card must've bumped out, because it didnt delete any media files or so it said, and then after the wipe it crashed. and refuses to boot into safestrap or even past the splash logo. I can get into download mode, but usb debugging isnt on anymore since i wiped it, I can get into the other mode as well ( cant for the life of me remember the name of it atm although i use it frequently) with some luck. I also happen to have all .md5 files from a backup i did about 4 months ago in tact, I cannot for the life of me get them to convert properly to apply them to the phone without safestrap however, if anyone has any insight to this please let me know also.
I can/will list any other information I have if anyone needs it, and if anyone can help it would safe a life!
The reason i reformatted it to begin with, was because media would stall, and when i plugged in the audio jack it'd freeze the entire app using it, then the whole phone would freeze. I believe it was due to lucky patcher but im unsure. The issue began when I altered the auto update file, and even after i rectified it, it persisted. At this time i have a phone soft bricked because it didnt delete all the media files and I assume something bugged onto the kernel image but Im not sure. If I can simply try to restore it to stock kernel then im fine with that.
Click to expand...
Click to collapse
UPDATE: I resolved the issue, by rooting, safestrapping, ripping the image files, from another galaxy s4 with alike descriptions. then i managed to side load it, then it booted properly, i then reformatted it completely back to 100% factory everything. Now my original problem persists, and i cant help feel that google services is causing it. (examnples of issues" proccess.gapps has stopped. anotrher process error code. phone calls can be made, but not recieved as it seems the server is too busy to n otice it, massive battery drain, audio takes several seconds to play, while video continues to play fine, audiojack is mostly unresponsive, phone calls that are made cannot recieve or send audio during call session, phone may freeze at unlock screen, or any time during operation, may even reboot from process overloading" now keep in mind. i removed every system file and app that the natural reformat will allow. so nothing applied by the user is on the phone, other than natural factory applications. Im digging a bit into the phone as i can but its a slow process whenit starts freezing. if anyone has any idea of what can be causing this, or how to fix this please inform me lol.
Ghujii said:
UPDATE: I resolved the issue, by rooting, safestrapping, ripping the image files, from another galaxy s4 with alike descriptions. then i managed to side load it, then it booted properly, i then reformatted it completely back to 100% factory everything. Now my original problem persists, and i cant help feel that google services is causing it. (examnples of issues" proccess.gapps has stopped. anotrher process error code. phone calls can be made, but not recieved as it seems the server is too busy to n otice it, massive battery drain, audio takes several seconds to play, while video continues to play fine, audiojack is mostly unresponsive, phone calls that are made cannot recieve or send audio during call session, phone may freeze at unlock screen, or any time during operation, may even reboot from process overloading" now keep in mind. i removed every system file and app that the natural reformat will allow. so nothing applied by the user is on the phone, other than natural factory applications. Im digging a bit into the phone as i can but its a slow process whenit starts freezing. if anyone has any idea of what can be causing this, or how to fix this please inform me lol.
Click to expand...
Click to collapse
The best solution must be installing the stock firmware via odin. Since you are on NC1 , You can installed the stock NB1.
Here is guide explaining you using odin, installing NB1, root with towel root, updated NC1, install the safestrap. The guide was not specifically written for that but you can find those steps in the guide.
I will attempt to do this, since nothing since has work. I am about to get a new logic board for the system in the next 2 weeks. Towel root DOES typically work on this system, however the last time I attmpted it it failed to work outright. Im not sure what has changed with the device, but i believe reflashing stock is the best method. The phone now, will boot up, then skip the lock screen and go straight to the home screen, which is black with no pull down bar, or with no signal and there is no way to rectify it. Even if there were, it boots back down and launches back up and becomes locked at the ATT logo.
After a fair bit of messing with it, and recovery mode it will sometimes boot normally where it tells me that processes has failed and askes me to cancel the ''app''. This is the best option to update the phone and attempt root, but getting it here is so difficult because it reboots itself and the mode is rare to acquire. This problem either is due to the kernel, or the rom i believe. I also am to believe the powercell may have some issue, as i replaced the battery a few weeks back and it worked fine for about 1 week.
Booting into safemode doesnt work either as it skips over the lock screen straight to the home screen. Outsidce of replacing the logic board, or attempting another flash im at the end of the short rope i was already on in terms of options.
sway8966 said:
The best solution must be installing the stock firmware via odin. Since you are on NC1 , You can installed the stock NB1.
Here is guide explaining you using odin, installing NB1, root with towel root, updated NC1, install the safestrap. The guide was not specifically written for that but you can find those steps in the guide.
Click to expand...
Click to collapse
UPDATE: I found therein two methods to flashback to stock. I did so, then proceeded to attempt to flash from nb1 to nj4. Progress stopped there when it flung an error 7 at me. So this means either something in my phone is corrupted or the file i downloaded from the above mentioned forum is corrupted. I also attempted flashfire, but seen as it STILL crashes at random due to process errors thats almost impossible to attempt.