Hi, I flashed with odin before and changed CSC aswell
i had uk unbranded s4
switched to german
i get this:
"your devices current firmware version is not supported to update firmware via kies"
Current firmware version: PDA:MGA / PHONE:MGA / CSC:MH2 (DBT)
i think its correct, so whats the problem ?
thx
Did you flash a pre-rooted stock firmware? If so, Kies may be detecting that the firmware is modified, and does not allow you to update. On your phone, go to settings - more - about device - software update and see if you get the error that your device has been modified. If so, you can try triangle away or else you have to factory reset your phone to remove this error.
Sent from my GT-I9505
In phone it says i did too many updates... and try in kies.
I flashed stock german no root.
But inthink i flashed it twice first not changed csc then changed csc and flashed again. How can i fix it?
I have the same problem with kies can update
Because CSC XXX after switch frimware german to CSC ITVBMH1 italy.
but with ITVBMH1 update with FOTA its ok download succed.
Any solution to uptade with kies????
Thanks
Sent from my GT-I9505 using XDA Premium 4 mobile app
I triangled it away
Then flashed stock dbt firm.
In phone it says i got latest update. No errors.
But in kies says same thing like my firmw. Not supports kies updates..
Csc dbt and firmw. Dbt
Flash counter reseted....
mataleo
To get official Kies updates the PDA phone and csc codes must all match. Because your codes don't match Kies knows the device has been modified.
Sent from my GT-I9505 using XDA Premium 4 mobile app
---------- Post added at 12:49 PM ---------- Previous post was at 12:47 PM ----------
http://forum.xda-developers.com/showthread.php?p=278
This is highlighted here by the Op of this thread
Sent from my GT-I9505 using XDA Premium 4 mobile app
HANDSY said:
To get official Kies updates the PDA phone and csc codes must all match. Because your codes don't match Kies knows the device has been modified.
Sent from my GT-I9505 using XDA Premium 4 mobile app
---------- Post added at 12:49 PM ---------- Previous post was at 12:47 PM ----------
http://forum.xda-developers.com/showthread.php?p=278
This is highlighted here by the Op of this thread
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thing is my codes matches
I changed csc to dbt
mataleo
PDA and Phone MGA csc MH2
Sent from my GT-I9505 using XDA Premium 4 mobile app
HANDSY said:
To get official Kies updates the PDA phone and csc codes must all match. Because your codes don't match Kies knows the device has been modified.
Sent from my GT-I9505 using XDA Premium 4 mobile app
---------- Post added at 12:49 PM ---------- Previous post was at 12:47 PM ----------
http://forum.xda-developers.com/showthread.php?p=278
This is highlighted here by the Op of this thread
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have problem with kies can update
Because CSC XXX after switch frimware german to CSC ITVBMH1 italy.
but with ITVBMH1 update with FOTA its ok download succed.
Any solution to uptade with kies????
Thanks advance
Sent from my GT-I9505 using XDA Premium 4 mobile app
To get official Kies updates the PDA phone and csc codes must all match. Because your codes don't match Kies knows the device has been modified.
Sent from my GT-I9505 using XDA Premium 4 mobile app
---------- Post added at 12:49 PM ---------- Previous post was at 12:47 PM ----------
http://forum.xda-developers.com/showthread.php?p=278
This is highlighted here by the Op of this thread
Sent from my GT-I9505 using XDA Premium 4 mobile app
Sent from my GT-I9505 using XDA Premium 4 mobile app
If you ever find a fix I would love to know what you did.
I have the same problem even after a full reflash from Kies itself..
http://forum.xda-developers.com/showthread.php?p=8
Have a look at this thread where the OP states that his pre-rooted stock rom is compatible with Kies.
Sent from my GT-I9505 using XDA Premium 4 mobile app
HANDSY said:
http://forum.xda-developers.com/showthread.php?p=8
Have a look at this thread where the OP states that his pre-rooted stock rom is compatible with Kies.
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
What about stock firmware
http://www.sammobile.com/firmwares/ create a free account, find your device, choose your firmware and download
Sent from my GT-I9505 using XDA Premium 4 mobile app
my codes matches
hey, i rooted triangle away it unrooted and flashed stock dbt
i did prieviously changed csc from uk one fo DBT german
so its looks like that now (see pic)
but still in phone settings it says i got latest update, no errors
but in kies says firmw. not supported
Have you got stock recovery too?
Sent from my GT-I9505 using XDA Premium 4 mobile app
---------- Post added at 09:04 AM ---------- Previous post was at 09:00 AM ----------
Something is still not official with your firmware. You may have activated the "fuse" security feature. When you have stock firmware do you have wifi and sound?
Sent from my GT-I9505 using XDA Premium 4 mobile app
.del
HANDSY said:
Have you got stock recovery too?
Sent from my GT-I9505 using XDA Premium 4 mobile app
---------- Post added at 09:04 AM ---------- Previous post was at 09:00 AM ----------
Something is still not official with your firmware. You may have activated the "fuse" security feature. When you have stock firmware do you have wifi and sound?
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
what u mean?
i did factory reset from settings, like 2 times
its clean install, codes matches, counter is on 0 or 1 not sure
i think update works in phone but kies not
its not too bad i guess, i can update OTA in phone, even better and quicker then kies
just like to solve problems, and like all works right
yes got wifi and sound, everything works smooth
?
mataleo
??????
Sent from my GT-I9505 using XDA Premium 4 mobile app
Related
Apologies for creating an extra thread but i have still cant get my sm-n9005 working. I keep receiving a SW Rev check fail when flashing.
now what i think has happened is i have flashed a BTU firmware. the device is a TGY model so i am assuming that the bootloader on the BTU firmware is newer.
When trying to flash TGY firmware obviously has a older bootloader which i am guessing?
I would really really really appreciate if anyone could just help getting the phone on atleast?
Thanks
Only way I sorted this was to flash the original firmware that came with the phone or whatever latest update I had updated to.
Sent from my SM-N9005 using XDA Premium 4 mobile app
---------- Post added at 03:15 PM ---------- Previous post was at 03:13 PM ----------
Mine came with stock UK btu firmware the first version and I tried to flash h3g UK firmware and got this. I got into bootloder and flashed stock UK btu firmware from www.samfirmware.com and it worked after that
Sent from my SM-N9005 using XDA Premium 4 mobile app
KevandLynds said:
Only way I sorted this was to flash the original firmware that came with the phone or whatever latest update I had updated to.
Sent from my SM-N9005 using XDA Premium 4 mobile app
---------- Post added at 03:15 PM ---------- Previous post was at 03:13 PM ----------
Mine came with stock UK btu firmware the first version and I tried to flash h3g UK firmware and got this. I got into bootloder and flashed stock UK btu firmware from www.samfirmware.com and it worked after that
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thanks
i have tried to flash the orignal software as the phone is from hong kong (tgy) but get the same error.
where can i download the software for the BOOTLOADER, PHONE, CSC ? when i download the firmware it is only as one tar file
https://mega.co.nz/#F!n9JnyI5S!VKmm1hxHlhIxWo1bXeIfLA
CSC from there
And
Modem I found in the general thread
Sent from my SM-N9005 using XDA Premium 4 mobile app
---------- Post added at 03:29 PM ---------- Previous post was at 03:27 PM ----------
http://forum.xda-developers.com/showthread.php?t=2475714
Sent from my SM-N9005 using XDA Premium 4 mobile app
---------- Post added at 03:29 PM ---------- Previous post was at 03:29 PM ----------
Not too sure but think the 1 file from samfirmware might have CSC and modem already in that 1 file
Sent from my SM-N9005 using XDA Premium 4 mobile app
---------- Post added at 03:30 PM ---------- Previous post was at 03:29 PM ----------
Mine was fixed with that 1 file anyway
Sent from my SM-N9005 using XDA Premium 4 mobile app
KevandLynds said:
https://mega.co.nz/#F!n9JnyI5S!VKmm1hxHlhIxWo1bXeIfLA
CSC from there
And
Modem I found in the general thread
Sent from my SM-N9005 using XDA Premium 4 mobile app
---------- Post added at 03:29 PM ---------- Previous post was at 03:27 PM ----------
http://forum.xda-developers.com/showthread.php?t=2475714
Sent from my SM-N9005 using XDA Premium 4 mobile app
---------- Post added at 03:29 PM ---------- Previous post was at 03:29 PM ----------
Not too sure but think the 1 file from samfirmware might have CSC and modem already in that 1 file
Sent from my SM-N9005 using XDA Premium 4 mobile app
---------- Post added at 03:30 PM ---------- Previous post was at 03:29 PM ----------
Mine was fixed with that 1 file anyway
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
FINALLY
got it working by removing aboot from the firmware and repacking and flashing
http://forum.xda-developers.com/showthread.php?p=46647570#post46647570
now any idea how to flash the BTU firmware onto the phone?
please let me know
thanks
jeezy85 said:
FINALLY
got it working by removing aboot from the firmware and repacking and flashing
http://forum.xda-developers.com/showthread.php?p=46647570#post46647570
now any idea how to flash the BTU firmware onto the phone?
please let me know
thanks
Click to expand...
Click to collapse
how u repaking to tar?
flashing with odin 3.0.9?
ARIEL80 said:
how u repaking to tar?
flashing with odin 3.0.9?
Click to expand...
Click to collapse
Use tar md5 packager download it then put the firmware file in the same folder and follow instructions
jeezy85 said:
Use tar md5 packager download it then put the firmware file in the same folder and follow instructions
Click to expand...
Click to collapse
ok
im unzip the tar file and delet the aboot file
now, how i repack it to a tar file again, i need to flash it with odin
thanks
Your devices current firmware version is not supported to update firmware via Kies." Current firmware version: PDA:MF3/PHONE:MF3/CSC:MF3 (ATT)
that is the message i get when i try to update my samsung galaxy s4 at&t
here is my devices information
samsung sgh-i337
4.2.2
i want to update to 4.3, but att hasnt pushed my update yet.
anyone can help?
try manually setting your date and time ahead atleast 24hrs. then try and check for software updates. i had to set manually set mine ahead a couple times before it gave me the update. (i had same problem with kies, and i just did mine this morning)
jorgeb1024 said:
Your devices current firmware version is not supported to update firmware via Kies." Current firmware version: PDA:MF3/PHONE:MF3/CSC:MF3 (ATT)
that is the message i get when i try to update my samsung galaxy s4 at&t
here is my devices information
samsung sgh-i337
4.2.2
i want to update to 4.3, but att hasnt pushed my update yet.
anyone can help?
Click to expand...
Click to collapse
Hello, at&t has pulled the update due to glitches. Some people reported that their phones wouldn't even turn on. Also you can't update your at&t galaxy s4 on Kies because at&t put a block on that... The reason they did that is so they can add all of their NSA crapware to your phone and lock it so you can't modify it as easy. If you really want 4.3 I would install a custom ROM. I'm still on 4.2.2 rooted. 4.3 isn't all that good anyway. Nothing new.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
---------- Post added at 05:13 PM ---------- Previous post was at 05:11 PM ----------
ToastyyX said:
Hello, at&t has pulled the update due to glitches. Some people reported that their phones wouldn't even turn on. Also you can't update your at&t galaxy s4 on Kies because at&t put a block on that... The reason they did that is so they can add all of their NSA crapware to your phone and lock it so you can't modify it as easy. If you really want 4.3 I would install a custom ROM. I'm still on 4.2.2 rooted. 4.3 isn't all that good anyway. Nothing new.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
My apologies. Att has released it again but you still can't update via Kies.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
I did what ejbmvp said. Now my iphone will not update for the next 400 hours lol because I went all the way up to 12/15...att software update doesnt let u clear/reset. I think im screwed
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
jorgeb1024 said:
I did what ejbmvp said. Now my iphone will not update for the next 400 hours lol because I went all the way up to 12/15...att software update doesnt let u clear/reset. I think im screwed
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Um... Did you set it back?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Yes . Only because I kept going forward with no luck. So I put it back to the normal date.
Is there a way to hit that reset button on att software update settings. It appears greyed out.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
jorgeb1024 said:
I did what ejbmvp said. Now my iphone will not update for the next 400 hours lol because I went all the way up to 12/15...att software update doesnt let u clear/reset. I think im screwed
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I did the same thing as you set it to 2015 and it let me look for updates, but it says update interrupted. Idk why but yeah. Maybe because I'm rooted idk. I wasn't updating anyway until a root method came out for mk2. Hopefully you can get it. If not take it to Best Buy and they can hook you up.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
---------- Post added at 04:08 AM ---------- Previous post was at 03:50 AM ----------
jorgeb1024 said:
Yes . Only because I kept going forward with no luck. So I put it back to the normal date.
Is there a way to hit that reset button on att software update settings. It appears greyed out.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Hmm... That's weird. Have you tried clearing the cache?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
i just checked mine and it still says i have to wait over 24hrs, so even tho my time and date are back to normal the update software still picks up when i fast forwarded my time/date. just a thought here, but i think the only way to reset that could be to flash back to stock with odin, but you would lose all data doing this. so its either probably doing that or keep trying to fast forward your time and checking.
ToastyyX said:
I did the same thing as you set it to 2015 and it let me look for updates, but it says update interrupted. Idk why but yeah. Maybe because I'm rooted idk. I wasn't updating anyway until a root method came out for mk2. Hopefully you can get it. If not take it to Best Buy and they can hook you up.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
---------- Post added at 04:08 AM ---------- Previous post was at 03:50 AM ----------
Hmm... That's weird. Have you tried clearing the cache?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Best buy doesn't even have 4.3 for the gs4 yet I already tried.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
---------- Post added at 08:44 PM ---------- Previous post was at 08:44 PM ----------
ejbmvp said:
i just checked mine and it still says i have to wait over 24hrs, so even tho my time and date are back to normal the update software still picks up when i fast forwarded my time/date. just a thought here, but i think the only way to reset that could be to flash back to stock with odin, but you would lose all data doing this. so its either probably doing that or keep trying to fast forward your time and checking.
Click to expand...
Click to collapse
Why don't you adb sideload the update?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
That's weird they don't have it... I just got the update notification after I defrosted the att update app thing with titanium. I'll update when there's a root method.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
I've been doing searches for a while and I haven't been able to figure out why this is going on. I was on Kangabean and just recently started losing service once in a while and had a hard time getting LTE. I upgraded to the latest Kit Kat version of the same rom and updated my baseband a few times using different ones and although it has improved, I'm still in the same boat. What I'm wondering is if this is an issue with the rom or if it is with hardware.
You have to have the 4.3 modem on 4.4 to get rid of the data drops. Also make sure you have your APN settings correct. PTA seems to be the best one for LTE. Google will help with finding that.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
graydiggy said:
You have to have the 4.3 modem on 4.4 to get rid of the data drops. Also make sure you have your APN settings correct. PTA seems to be the best one for LTE. Google will help with finding that.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've had the PTA settings forever now. They're still my default. How do I go about getting the 4.3 modem on 4.4? What would I use?
Just look up rock ratt's post. He has all of the 4.3 modems set up as flashable zips. ?
Sent from my GT-I9505 using XDA Premium 4 mobile app
---------- Post added at 06:35 PM ---------- Previous post was at 06:16 PM ----------
http://forum.xda-developers.com/showthread.php?t=2496517. Just download and flash in recovery.
Sent from my GT-I9505 using XDA Premium 4 mobile app
JLopez149 said:
Just look up rock ratt's post. He has all of the 4.3 modems set up as flashable zips. ?
Sent from my GT-I9505 using XDA Premium 4 mobile app
---------- Post added at 06:35 PM ---------- Previous post was at 06:16 PM ----------
http://forum.xda-developers.com/showthread.php?t=2496517. Just download and flash in recovery.
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Did that and got the modem. Service issues are okay now, but I every time I select LTE as network mode, it somehow ends up switching back to 3G
Sorry if the question has previously been answered.
I have N9005 and tried to flash a ROM.
I have tried to flash using Odin on my PC, as I have previously used this successfully.
On this occasion it failed after partially flashing.
I have tried kies and kies3 both without success.
I suspect the solution may be simple but I am new to Samsung Odin kies etc.
edit fixed with help
I am familiar with adb and fastboot commands if these are useful.
Grateful for any help to recover a working phone, don't mind if I have to wipe phone data
Sent from my Nexus 5 using xda app-developers app
Plug into KIES and do an emergency firmware recovery.
Or if you can get into download mode, fly over to djembay's thread and grab one of his images and flash via odin.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Thanks for your reply
I tried Kies emergency firmware recovery without any sucess.
I will try Odin with the stock rom you suggest.
Can I select any ROm from djembay's thread ?
the one I have tried is N9005XXUDMJ7-PRE-ROOTED-KNOX-FREE-ODEX-BL-FREE, is this ok
What firmware are you on currently? Do you know? Bootloader etc? - is your KNOX already tripped? -- the ROM from that thread WILL trip it just so you are aware.
Sent from my SM-N9005 using XDA Premium 4 mobile app
---------- Post added at 08:53 PM ---------- Previous post was at 08:52 PM ----------
But yes if you are happy with the firmware being MJ7 and KNOX being tripped then you should be OK to try it.
Sent from my SM-N9005 using XDA Premium 4 mobile app
radicalisto said:
What firmware are you on currently? Do you know? Bootloader etc? - is your KNOX already tripped? -- the ROM from that thread WILL trip it just so you are aware.
Sent from my SM-N9005 using XDA Premium 4 mobile app
---------- Post added at 08:53 PM ---------- Previous post was at 08:52 PM ----------
But yes if you are happy with the firmware being MJ7 and KNOX being tripped then you should be OK to try it.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for your help, Odin seems to have flashed Ok this time.
I should have said I am already Knox 0x1 so no problem
My Note 3 is back again, thanks to you
Great!! Glad to have helped
Sent from my SM-N9005 using XDA Premium 4 mobile app
Hi how do I fix this ? I want to update through my phone.
Sent from my SM-N9005 using xda app-developers app
Springles said:
Hi how do I fix this ? I want to update through my phone.
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Use Samsung Kies, update manual via USB from your PC. If you stil prefer OTA, try next day or the day after.
:sly: It tells you how to fix it, doesn't it ?
Sent from my N9005
---------- Post added at 11:34 AM ---------- Previous post was at 11:19 AM ----------
nlatifolia said:
Use Samsung Kies, update manual via USB from your PC. If you stil prefer OTA, try next day or the day after.
Click to expand...
Click to collapse
Thank you for writing down what is already written in the screenshot.
Sent from my N9005
Hi, I tried tried today & it still did not work.
Sent from my SM-N9005 using xda app-developers app