Hey i installed another rom on my sgy, now i would like to restore my original one, I have a backup of IT by cwm, plz give me step by step help to how to restore it using cwm
Go to recovery mode!!
Flash clockworkmode !!
Go to back up & restore !!
Go to restore!!
Chose ur back up time!!
All done!!
1hewar10rd said:
Go to recovery mode!!
Flash clockworkmode !!
Go to back up & restore !!
Go to restore!!
Chose ur back up time!!
All done!!
Click to expand...
Click to collapse
But don't i need to do other steps like mount data n wipe dalvik cache etc...
ApexPredator01 said:
But don't i need to do other steps like mount data n wipe dalvik cache etc...
Click to expand...
Click to collapse
No - your putting your phone back to the exact state it was in when backup was made - wiping things is not necessary and it auto mounts when restoring
marcussmith2626 said:
No - your putting your phone back to the exact state it was in when backup was made - wiping things is not necessary and it auto mounts when restoring
Click to expand...
Click to collapse
Are you Damn sure ?
ApexPredator01 said:
Are you Damn sure ?
Click to expand...
Click to collapse
With respect I know what I'm talking about - iv tested nearly every rom here for my statusbar thread - iv backed up & restored my phone too many times to count
Dude !! I always use advance recovery of only system because I always strucked in boot-loop while trying any new thing!!
OKay Thanks Alot Guys
Hey guys . Plz help i installed hyperion 8 n now when i open recovery it opens cwm directly and when i select restore . It says error loading boot image... Pls help :/
ApexPredator01 said:
Hey guys . Plz help i installed hyperion 8 n now when i open recovery it opens cwm directly and when i select restore . It says error loading boot image... Pls help :/
Click to expand...
Click to collapse
Coz the cwm is now your default recovery and yeah.. were you trying to restore cm7 backup? :what:
aniket.lamba said:
Coz the cwm is now your default recovery and yeah.. were you trying to restore cm7 backup? :what:
Click to expand...
Click to collapse
Yess !
I did exactly like these guys told me above :/
Oh dear - you do know to restore a cm7 backup you need to be on an ext4 partition and on percys kernel - if you flashed hyperion you will be savies kernel hence invalid boot image
flash percys kernel
reboot recovery
format system data cache flash (this changes system to ext4 for cm7 use)
advanced restore
restore system & data only
marcussmith2626 said:
Oh dear - you do know to restore a cm7 backup you need to be on an ext4 partition and on percys kernel - if you flashed hyperion you will be savies kernel hence invalid boot image
flash percys kernel
reboot recovery
format system data cache flash (this changes system to ext4 for cm7 use)
advanced restore
restore system & data only
Click to expand...
Click to collapse
How to do all that ?? :/
ApexPredator01 said:
How to do all that ?? :/
Click to expand...
Click to collapse
Well you should know - if you correctly flashed cm7 you would know how to flash percys kernel
If you flash roms you know how to format
and advanced recovery is in backup & restore in cwm
if you can't follow those instructions give up now and read the op of cm7 thread properly
marcussmith2626 said:
Well you should know - if you correctly flashed cm7 you would know how to flash percys kernel
If you flash roms you know how to format
and advanced recovery is in backup & restore in cwm
if you can't follow those instructions give up now and read the op of cm7 thread properly
Click to expand...
Click to collapse
Can you plz give me proper steps procedure with download links PLEASEE !
ApexPredator01 said:
Can you plz give me proper steps procedure with download links PLEASEE !
Click to expand...
Click to collapse
Really are you being serious!
Steps already given
To restore cm7 backup
flash percys kernel
reboot recovery
format system data cache
advanced restore
restore system and data only
what links can you possibly need - if you have already flashed cm7 before you know where percy kernel is because you need to be on percys kernel to flash the latest percys cm7 (hint it's on percy's cm7 thread!)
if you hadn't noticed I'm getting fed up of people who want spoon feeding
ApexPredator01 said:
I did exactly like these guys told me above :/
Click to expand...
Click to collapse
Dude!! We suggest u about how to restore STOCK ROM not cm7!!
Plz give ur full information what do u want??
U demand the process of restoring Stock Rom so we suggest that process !! :'(
1hewar10rd said:
Dude!! We suggest u about how to restore STOCK ROM not cm7!!
Plz give ur full information what do u want??
U demand the process of restoring Stock Rom so we suggest that process !! :'(
Click to expand...
Click to collapse
Yes man i want to restore stock Rom only !
And i thought by cm7 he meant clockworkmod not cyanogenmod
1hewar10rd said:
Dude!! We suggest u about how to restore STOCK ROM not cm7!!
Plz give ur full information what do u want??
U demand the process of restoring Stock Rom so we suggest that process !! :'(
Click to expand...
Click to collapse
Hey man. Im telling again i made a backup of my stock Rom using Clockworkmod . then i installed hyperion. now i want to go back to stock Rom using that backup. i followed steps you told earlier. it says Error loading boot image. Plz help now i!
Related
somone help me , i want to install new update of CM SCREAM by ling gan but when i install zip file and reboot devise , in bootloader nothing happend ,android startup dosent start , whats the problem . please help !!! :crying:
If you have backup, you can restore via recovery. If not, you have to reflash rom and don't forget wipe all before flash new rom.
dstar000 said:
If you have backup, you can restore via recovery. If not, you have to reflash rom and don't forget wipe all before flash new rom.
Click to expand...
Click to collapse
how can i reflash , from recovery ?
go to the right thread
milad.bmi said:
how can i reflash , from recovery ?
Click to expand...
Click to collapse
there is a whole thread about this rom .. check it you will find the answer
http://forum.xda-developers.com/showthread.php?t=1678409
Hi ,, all
Do you can Help me ?
My GalY is not Work , Flashing the ROM Jelly Blast ?
I Following step by step the tutorial in the Page Official and all step the result is bootloop
step by step from me ?
- The First me Flash the Stock Rom from ODIN .
- after that I Flash The JellyBlast Rom via CWM
- i'm wait wait wait 10 minute and the result is BOOTLoop
please someone user can Help me ?
my Gal Y is BootLoop and I want Installed the JBRom .
Sorry for I Can't English
You need to do a full data wipe and cache wipe before flashing the rom. Please read the instructions carefully.
||I'm just a PM away for help||
I have tried over and over again ..
Sorry For English ..
NearLighting said:
I have tried over and over again ..
Sorry For English ..
Click to expand...
Click to collapse
First of all is your Y rooted?
if yes
In CWM mode u need to wipe your data as well as cache.Then install the rom.
If not
u need to root it first then follow above steps.
and if your phone is already rooted and still the rom doesnt install.than check if ur sd card has partitioning or not.if it has remove the partition and try.
samir basnet said:
First of all is your Y rooted?
if yes
In CWM mode u need to wipe your data as well as cache.Then install the rom.
If not
u need to root it first then follow above steps.
and if your phone is already rooted and still the rom doesnt install.than check if ur sd card has partitioning or not.if it has remove the partition and try.
Click to expand...
Click to collapse
FYI, rooting isn't necessarily required for flashing roms. All custom roms so far are pre-rooted.
||I'm just a PM away for help||
Did you clear data/cache from STOCK recovery AFTER flashing the rom? If not, do it and check if it works.
samir basnet said:
First of all is your Y rooted?
if yes
In CWM mode u need to wipe your data as well as cache.Then install the rom.
If not
u need to root it first then follow above steps.
and if your phone is already rooted and still the rom doesnt install.than check if ur sd card has partitioning or not.if it has remove the partition and try.
Click to expand...
Click to collapse
Use Root or Deodex ROM ? DEODEX include the Root .. ?
hitme987 said:
Did you clear data/cache from STOCK recovery AFTER flashing the rom? If not, do it and check if it works.
Click to expand...
Click to collapse
Stock Recovery ? why not CWM ?
Sorry Bad English .
try wipe data/reset, wipe cache partition, in advanced mode wipe dalvik cache, then flash jellyblast
Sent from my GT-S5360
After flashing stock rom u should root ur phone nd den flash any rom
U can install creeds 3.5 on ur phone without root
Its d only rom which u can install without root
Sent from my GT-S5360 using xda premium
No it nlot. I installed hype gm without root!!
Sent from my GT-S5360 using xda app-developers app
NearLighting said:
Use Root or Deodex ROM ? DEODEX include the Root .. ?
Stock Recovery ? why not CWM ?
Sorry Bad English .
Click to expand...
Click to collapse
Root your phone. If already rooted, proceed to the next step.
Make sure that you're on Stock kernel.
If your'e NOT on Stock kernel, either flash stock kernel, or open the JELLYBLASTV3.signed.zip on your pc, delete boot.img from it, and then flash the zip. In that way, you'll be able to use ANY kernel you already have.
Switch off your phone.
Go to Clockwork mode. This is important, because CWM is necessary, or you won't be able to boot up with the new Kernel.
Use the volume keys to move up and down.
Wipe data and cache
Now choose: Install zip from sd card.
Choose JELLYBLAST V3.signed.zip
Choose "yes"
It will be Installed. Now reboot your phone. First boot will take time. Be patient.
If you have followed EVERYTHING above carefully, you will soon boot up to your new rom.
Please wait until media scanning is completed.
Enjoy!!!
i am new to rooting & other things but i was able to install a hyperion rom because in its description, there were steps (one by one). i want to install cm7 rom but i tried to search the proceedure in the threads but could not find it. I tried installing it the same way i did the hyperion one but couldn't suceed. at the time of reeboting (the last step), my phone froze at the samsung logo for 10 minutes & nothing happened. please give me the detailed proceedure.
aman95 said:
i am new to rooting & other things but i was able to install a hyperion rom because in its description, there were steps (one by one). i want to install cm7 rom but i tried to search the proceedure in the threads but could not find it. I tried installing it the same way i did the hyperion one but couldn't suceed. at the time of reeboting (the last step), my phone froze at the samsung logo for 10 minutes & nothing happened. please give me the detailed proceedure.
Click to expand...
Click to collapse
first mount system then flash
cyanogenmod#2 kernel then go to advanced & choose reboot recovery then format system data cache then mount sysem data cache again then flash cm7 rc1 rom zip after flash wipe data then reboot then u r done
vlc07 said:
first mount system then flash
cyanogenmod#2 kernel then go to advanced & choose reboot recovery then format system data cache then mount sysem data cache again then flash cm7 rc1 rom zip after flash wipe data then reboot then u r done
Click to expand...
Click to collapse
can you explain, how to flash kernel. i think, i am facing problem dping this
aman95 said:
can you explain, how to flash kernel. i think, i am facing problem dping this
Click to expand...
Click to collapse
you flash percys kernel the same as you flash any zip
go into cwm
mount system
flash percys kernel zip
restart to recovery
you will get mount errors (dont worry)
format system data and cache
mount system data and cache
then flash the cm7 zip as already explained
marcussmith2626 said:
you flash percys kernel the same as you flash any zip
go into cwm
mount system
flash percys kernel zip
restart to recovery
you will get mount errors (dont worry)
format system data and cache
mount system data and cache
then flash the cm7 zip as already explained
Click to expand...
Click to collapse
Does it follow the same proceedure as the hyperion one, or does every ROM takes a different proceedure??
aman95 said:
Does it follow the same proceedure as the hyperion one, or does every ROM takes a different proceedure??
Click to expand...
Click to collapse
Flash instructions are given in the rom thread only.
Thank you everyone, I have installed the nexus 5 ROM.
I just need to ask a few things.
I cant find the task manager.
And some features are locked for premium users. can i crack it somehow??
Please help
aman95 said:
Thank you everyone, I have installed the nexus 5 ROM.
I just need to ask a few things.
I cant find the task manager.
And some features are locked for premium users. can i crack it somehow??
Please help
Click to expand...
Click to collapse
Are you ahead of Googs ? Even Google has not released Nexus 5
Sent from my TOASTER
redndian said:
Are you ahead of Googs ? Even Google has not released Nexus 5
Sent from my TOASTER
Click to expand...
Click to collapse
sorry, it was Nexus Me v5
this one- http://forum.xda-developers.com/showthread.php?t=2442977
So please help me with task manager
& unlocking it
aman95 said:
sorry, it was Nexus Me v5
this one- http://forum.xda-developers.com/showthread.php?t=2442977
So please help me with task manager
& unlocking it
Click to expand...
Click to collapse
you can add your own task manager to the framework or use an app from the playstore
and dont ask to crack apps to get paid versions or i'll report if this continues
So yeah, hey XDA, first post here
I have got a problem with my SGY, whenever i flash a custom kernel via CWM, I get stuck at splash screen. And when i flash stock kernel via Odin, phone boots normally.
Do you guys know what is the problem?
Kernels I have tried:
1.Kuro - loop at splash
2.Hells-fusion - loop at splash
3.Savie - stuck at splash
Any help would be really appreciated.
xddxd said:
So yeah, hey XDA, first post here
I have got a problem with my SGY, whenever i flash a custom kernel via CWM, I get stuck at splash screen. And when i flash stock kernel via Odin, phone boots normally.
Do you guys know what is the problem?
Kernels I have tried:
1.Kuro - loop at splash
2.Hells-fusion - loop at splash
3.Savie - stuck at splash
Any help would be really appreciated.
Click to expand...
Click to collapse
Most likely you failed to mount system before flashing the zip or your baseband needs updating
Make sure you goto mounts & storage in cwm and mount system before flashing any zip (will display "unmount system" if it is mounted)
To update baseband flash one of the latest stock roms via odin - see my firmware thread - link it signature
marcussmith2626 said:
Most likely you failed to mount system before flashing the zip or your baseband needs updating
Make sure you goto mounts & storage in cwm and mount system before flashing any zip (will display "unmount system" if it is mounted)
To update baseband flash one of the latest stock roms via odin - see my firmware thread - link it signature
Click to expand...
Click to collapse
Thanks for your reply
Yeah I did mount everything in CWM, it's probably the baseband thing. I have the latest firmware file for my region (Baltic States). Will it work?
Here is the version of it:
PDA:XXMI1
MODEM:XXMG1
CSC:SEBLL1
KERNEL:XXMI1
Anyways, gonna make a nandroid backup and try to flash the whole stock firmware.
EDIT:Flashed stock with wipe, rooted, flashed savie - no luck.
xddxd said:
Thanks for your reply
Yeah I did mount everything in CWM, it's probably the baseband thing. I have the latest firmware file for my region (Baltic States). Will it work?
Here is the version of it:
PDA:XXMI1
MODEM:XXMG1
CSC:SEBLL1
KERNEL:XXMI1
Anyways, gonna make a nandroid backup and try to flash the whole stock firmware.
EDIT:Flashed stock with wipe, rooted, flashed savie - no luck.
Click to expand...
Click to collapse
Yes that's the latest firmware
The only other thing I can think of is that you are using the wrong cwm
Here is my one - Flash it in stock recovery then mount system & flash zip
http://d-h.st/u2m
Also there are different versions of savie - make sure you are using the stock one if on stock rom and not the cm one
I would use hells fusion #50 myself for testing
marcussmith2626 said:
Yes that's the latest firmware
The only other thing I can think of is that you are using the wrong cwm
Here is my one - Flash it in stock recovery then mount system & flash zip
(Your link, can't post it because of limitation)
Also there are different versions of savie - make sure you are using the stock one if on stock rom and not the cm one
I would use hells fusion #50 myself for testing
Click to expand...
Click to collapse
Downloaded the CWM you provided, mounted everything, flashed hells-fusion, and still got bootloop
xddxd said:
Downloaded the CWM you provided, mounted everything, flashed hells-fusion, and still got bootloop
Click to expand...
Click to collapse
I dont know what your problem is - do you have any mount scripts for linking sdext
You can format data and wipe cache & delvik cache & see if it boots
Other than that without seeing your phone I cannot offer anything else
marcussmith2626 said:
I dont know what your problem is - do you have any mount scripts for linking sdext
You can format data and wipe cache & delvik cache & see if it boots
Other than that without seeing your phone I cannot offer anything else
Click to expand...
Click to collapse
Yep, I had link2sd, anyway to delete the script?
xddxd said:
Yep, I had link2sd, anyway to delete the script?
Click to expand...
Click to collapse
Use aroma file manager - Flash it in cwm with system mounted
Goto system/etc/init.d
Delete everything in there so nothing can conflict
http://forum.xda-developers.com/attachment.php?attachmentid=1408182&d=1350455938
marcussmith2626 said:
Use aroma file manager - Flash it in cwm with system mounted
Goto system/etc/init.d
Delete everything in there so nothing can conflict
http://forum.xda-developers.com/attachment.php?attachmentid=1408182&d=1350455938
Click to expand...
Click to collapse
It worked, thank you sooo much!! Can I use Link2sd now on kuro?
xddxd said:
It worked, thank you sooo much!! Can I use Link2sd now on kuro?
Click to expand...
Click to collapse
If done correctly than yes
marcussmith2626 said:
If done correctly than yes
Click to expand...
Click to collapse
Oh, and BTW savie still doesn't work xD
xddxd said:
Oh, and BTW savie still doesn't work xD
Click to expand...
Click to collapse
His kernel is technically banned on XDA due to not being able to provide the sources
All I can say is long as you are the right one - there's one for stock and one for cm7 but I'd just use hells fusion #50
marcussmith2626 said:
His kernel is technically banned on XDA due to not being able to provide the sources
All I can say is long as you are the right one - there's one for stock and one for cm7 but I'd just use hells fusion #50
Click to expand...
Click to collapse
Idk why, but Ramexpander says hells-fusion doesn't support swap so I went for kuro.
xddxd said:
Idk why, but Ramexpander says hells-fusion doesn't support swap so I went for kuro.
Click to expand...
Click to collapse
Hells fusion doesn't support swap - I don't think there's much point in it anyway but whatever works best for you
Hey guys I have n910c 6.01 rooted with two recovery. I want to ask if is there any way to install a custom kernel through another custom kernel. What I mean . I have a custom kernel that I don't want anymore and I don't want to reset my phone for a kernel... so I am asking if there is any way to do that. Thanks
Just reflash your zip rom without wiping data
Then flash any custom kernel you want
salah omer said:
Just reflash your zip rom without wiping data
Then flash any custom kernel you want
Click to expand...
Click to collapse
The problem is that the rom is stock. Not custom. So I can't flash the rom
Well . .
Method 1:
u need to do a backup first with ur custom recovery then flash the new kernel over the old one & see if things goes well or if u got troubles u can restore ur backup .
Method 2:
- u need to do a backup first with ur custom recovery.
- Then do a factory reset.
- In custom recovery go to restore & Restore everything except the system partition.
- after that u can flash ur new kernel.
PS: by custom recovery i mean TWRP .
salah omer said:
Well . .
Method 1:
u need to do a backup first with ur custom recovery then flash the new kernel over the old one & see if things goes well or if u got troubles u can restore ur backup .
Method 2:
- u need to do a backup first with ur custom recovery.
- Then do a factory reset.
- In custom recovery go to restore & Restore everything except the system partition.
- after that u can flash ur new kernel.
PS: by custom recovery i mean TWRP .
Click to expand...
Click to collapse
Done. I install the new kernel just trough the old... and it's ok.. thanks..