After installiting Hyperion latest build i lost my imei and ril after searching i found a fix an alternative savie kernel it fixed the ril and imei issue but aroused a new wifi issue i have tried all the kernel on that rom non shows ril and imei only one shows but with no wifi please help me what should i do to get everything working on that rom
Related
Hello friends
i tried to backup my stock kernel ddmd1 version 2.6.35 in case i flashed a new kernel and wanted to revert to stock one
i just want someone who can test this kernel if it installs correctly
please devs please test this and report me if it flashed successfully
this is stock kernel so it is completely stable and causes no issues
hi folks,
today i was flashed my device with Cyanmobile experince by percy's thread...
ive successfully booted bt there was some of the apps not workin well also i failed to call anyone as itz showing 'mobile n/w nt registered'
is there any issue?if it has, plz give me ssolution..
make sure you are using a cm kernel - eg percys cm #2 or black reactor cm
check that you have imei - dial *#06#
if imei is blank you can try
changing your baseband by flashing a different stock rom firmware
flash the ril fix from the hyperion thread in dev section
marcussmith2626 said:
make sure you are using a cm kernel - eg percys cm #2 or black reactor cm
check that you have imei - dial *#06#
if imei is blank you can try
changing your baseband by flashing a different stock rom firmware
flash the ril fix from the hyperion thread in dev section
Click to expand...
Click to collapse
im usin dxmi frmwr...
i cant make cals... i.e. its showin No Service..nd nt a carrier name...
crazysuraj said:
im usin dxmi frmwr...
i cant make cals... i.e. its showin No Service..nd nt a carrier name...
Click to expand...
Click to collapse
see my above post - the chances are you have no imei
i have recently installed 4 differernt roms...
but non of them supports the sim card functionality,,,
i get no network...cant access the internet...
i googled about it...there was a solution which said to flash a "radiofix.zip" file but that file has been removed from the original thread..
please help:cyclops:
maxx007 said:
i have recently installed 4 differernt roms...
but non of them supports the sim card functionality,,,
i get no network...cant access the internet...
i googled about it...there was a solution which said to flash a "radiofix.zip" file but that file has been removed from the original thread..
please help:cyclops:
Click to expand...
Click to collapse
its because you are using a new firmware with an old kernel or rom based on an old firmware with a new kernel
just flash the ril fix from the hyperion thread in cwm with system mounted if its a stock based rom you are using
if its a cm7 based rom you will probably have to change your baseband
Hello
I'm NEW here
can you plase tell me what wifi driver should i flash along with [email protected] kernel ? My Wifi is not turning on after installing Percy kernel it just simply shows "ERROR"
i tried white xp drivers AND stock driver AND ril fix too. But it didn't work
.
i want to use percy kernel for increasing internel memory using Amarullz script
I'm usnig CM 7.2 Reincarnation s5 edition ROM
My baseband is DDMD1
.
Kindly somebody HELP me and reply me ASAP
Regards.
Owayx said:
Hello
I'm NEW here
can you plase tell me what wifi driver should i flash along with [email protected] kernel ? My Wifi is not turning on after installing Percy kernel it just simply shows "ERROR"
i tried white xp drivers AND stock driver AND ril fix too. But it didn't work
.
i want to use percy kernel for increasing internel memory using Amarullz script
I'm usnig CM 7.2 Reincarnation s5 edition ROM
My baseband is DDMD1
.
Kindly somebody HELP me and reply me ASAP
Regards.
Click to expand...
Click to collapse
You dont need any different wifi driver with that kernel
Percys cm7.2 kernel is only to be used with percys version of cm7 - if you are using it with any other version of cm7 wifi and bluetooth will not work
If the ROM is based on Percy's cm7 see solution at end of my explaination
If you are using biels version of cm7 you must use his common kernel - you will find links on the op of the rom thread or search dev section
Whites WiFi driver is for whites kernel or hells fusion #50 kernel only for use with stock based ROMs
Ril files I posted are again for stock based roms only and are not to be used with cm7 based roms and is to do with imei and nothing to do with WiFi
If you are using a stock based rom you must use a stock based kernel
If the ROM is based on Percy's build of cm7 and you still get WiFi error after flashing his kernel try the following
Using a root browser set the following file permissions (long press file or folder and select set permissions but each root browser is different)
Goto
system/etc
set permission of wifi folder to rwxrwxrwx
open wifi folder
set permission of wpa_supplicant.conf to rwxrwxrwx
So I know there are lot of ril files provided in XDA for sgy, there's also ril file from sir @marcussmith2626 in his thread and also I can use the ril file from Hyperion 8.
I tried to make one. I just copied the ril file from H9, the (libbrcm.so), and created a flashable zip (system/lib/libbrcm.so). I flashed it 'cause I lost my IMEI when I flashed Hell's Kernel. But the problem is even when I flashed the ril file I've made, the IMEI is still unknown.
here are the things I did :
1.Flashed H9
2. copied the libbrcm.so
3.made a ril flashable zip
4. flashed hells kernel
5. flashed the ril file (system is mounted)
Please help, correct the wrong things that I did. the IMEI is still unknown.
and also I want to learn.
ROM: H9
Kernel: hells
You are using the wrong ril file
For the rom & kernel combo you have described you need to use ril file 3 old ril from my ril thread
This is because hells fusion was made based on the old ramdisk
Hyperion 9 is based on a baseband which stock kernel uses the new ramdisk
Therefore hyperion 9 ril file is for the new ramdisk
Changing kernels to one that uses the old ramdisk you also need to change the ril file to the older file
Note older doesn't mean it's not as good - there's no difference - Just different files
The kernel doesn't contain the ril file - the rom does so I don't know why you took the ril file from the rom & flashed it - you were flashing the same ril file you already were using in hyperion 9
You needed to take the ril file from an old stock rom baseband - otherwise known as ril file 3 from my ril thread
marcussmith2626 said:
You are using the wrong ril file
For the rom & kernel combo you have described you need to use ril file 3 old ril from my ril thread
This is because hells fusion was made based on the old ramdisk
Hyperion 9 is based on a baseband which stock kernel uses the new ramdisk
Therefore hyperion 9 ril file is for the new ramdisk
Changing kernels to one that uses the old ramdisk you also need to change the ril file to the older file
Note older doesn't mean it's not as good - there's no difference - Just different files
The kernel doesn't contain the ril file - the rom does so I don't know why you took the ril file from the rom & flashed it - you were flashing the same ril file you already were using in hyperion 9
You needed to take the ril file from an old stock rom baseband - otherwise known as ril file 3 from my ril thread
Click to expand...
Click to collapse
I get it :good: