Hey y'all experimented devs out there, got a question :
Which JB ROM do you think would be most suitable to start porting from for our dear Galaxy Tab 7.7 ?
Do you think the official Nexus7 firmware would be fine or some CM10 tablet ROM would be a better choice ?
Or should I just compile JB from source ?
Thank you for taking the time to answer me.
Hi guys,
think that will be possible a kernel for stock rom jelly bean ?
Thank you. and sorry if I break too.
That would be great but IMHO i think that first we should wait for some custom roms
based on the final builds of 4.1.1 before we see any kernels....
Kind of hard to build a custom kernel for the TW Jelly Bean ROMs when they aren't official yet and thus, no source has been posted for them yet.
Hi.. Greetings ..:laugh:
I need a rom which has theme and graphics like rapidroid which should be based on quarks custom kernel, as I have defy 525 on which full sbf of 526 have been flashed & if I use rom other than quarks second build & Kayant slimbean then my camera becomes dead as kernel changes and the name of kernel comes like hudson.. Or can we use other launcher in quarks rom or slimbean rom?????
You can use every launcher that supports Jelly Bean
You can also apply themes
Ok Now I am using sony launcher
Steveletack said:
You can use every launcher that supports Jelly Bean
You can also apply themes
Click to expand...
Click to collapse
:laugh: Thanks for reply!!! Now I am using sony arc launcher ( my favourate one) in quarks second boot rom.One more thing I would like to ask you Is their any way to modify Icons & update these icons like sony Arc??
hey guys,
i have install the the nexushd2 rom jelly bean...
it works pretty well
but...can i make the status bar transparent and how can i do this. i can`t find any thread about this...
thank's for your help!
Hmmm...no good answer?
the answer is you have to have to be using a rom
that has a rom control in it that is setup to allow transparency
some of the roms that have that are
aokp roms
baked roms
and i think there is a couple more for jb 4.1.2 roms
and for jb 4.2.2 roms right now its only the Xylon rom
but its in an early beta stage
and im sure since wifi is now working on jb 4.2.2 roms
there will be aokp and baked roms coming soon
SOME NEW PORTED ANDROID 4.4.4 KITKAT ROMS FOR SAMSUNG CAPTIVATE
ANDROID 4.4.4 KITKAT CAPTIVATE ROMS:
- SlimKat 4.4.4 - 9.0 weekly 8328 - 2015.01.01
- SlimKat 4.4.4 - 8.18 weekly 8115 - 2014.12.02
- SlimKat 4.4.4 - 8.0 weekly 6965 - 2014.09.23
- SlimKat 4.4.4 - 7.8 weekly 6274 - 2014.09.02
- SlimKat 4.4.4 - 7.6 weekly 6228 - 2014.08.26
- SlimKat 4.4.4 - 6.8 weekly 5772 - 2014.07.28
(original thread)
- OmniRom 4.4.4 official 2015.01.28 nightly
- OmniRom 4.4.4 official 2014.12.06 nightly
- OmniRom 4.4.4 official 2014.09.01 nightly
- OmniRom 4.4.4 official 2014.07.09 nightly
- OmniRom 4.4.4 official 2014.06.23 nightly
(original thread)
- ArchiDroid 4.4.3 - 2014.06.19 fixed version (gapps included)
(original thread)
- Carbon (KK4.4.4) unofficial - 2014.07.13-1450
(original thread)
- C-Rom v7.1 (KK4.4.4) - 2014.06.22
(original thread)
- EHNDROIX V 14.8.8 (KK4.4.4) - 2014.08.07
(original thread)
- L-Droid-v2.2.2 (KK4.4.4) - 2014.07.07
(original thread)
- BeanStalk-4.4.4007 (KK4.4.4) - 2014.07.12
(original thread)
- SpiritRom v1.4 (KK4.4.4) - 2014.09.22
- SpiritRom v1.2 (KK4.4.4) - 2014.08.17
(original thread)
- LiquidSmooth v3.2 Odex (KK4.4.4) - 2014.08.30
(original thread)
- Omni + Floating Windows + Lockscreen Notifications + App Circle Bar (KK4.4.4)- 2014.08.11
(original thread)
- Mackay Rom 4.9.12 (KK4.4.4) - 2014.09.14
(original thread)
- AOKP 4.4.4 - 2014.12.04
(original thread)
- PAC ROM KK 4.4.4 - 2014.12.06
(original thread)
GAPPS: PARANOID MODULAR PACKAGES (ART compatible)
PA Gapps packages
OTHER NON 4.4.x KITKAT ROMS
- AOKP 4.2.2 Milestone 2
(gapps needed)
- GlassMix Rom 4.1.2 - 2014.06.27 (by KruciFFF)
(original thread)
****
KK 4.4.3 + 4.4.4 COMPATIBLE KERNELS
- NeatKernel 1.09, 1.11 or newer.
- Semaphore kernel 3.4.3 updated by iyahman
- CM11 Captivate 4.4.3, 4.4.4 stock kernel (attached)
Monfro said:
SOME NEW PORTED 4.4.2 KITKAT ROMS FOR SAMSUNG CAPTIVATE
Stock CM11 kernel
4.4.2 CAPTIVATE ROMS:
OmniRom official 2014.05.08 nightly
(original thread)
Paranoid Android 4.3 beta 3 - 2014.05.08
(original thread)
SlimKat 4.9 weekly 3921 - 2014.05.05
(original thread)
GAPPS: PARANOID MINI MODULAR PACKAGE (works with ART)
Goo.im
Android File Host
Dev-Host
I will update this thread and post new roms in my free time, not on regular basis.
Click to expand...
Click to collapse
Will this work with captivate?
galaxys3lover said:
Will this work with captivate?
Click to expand...
Click to collapse
Of course!!
I ported these roms so Captivate users can have more roms to play with.
Roms uploaded.
Unfortunately today i did not succeed to upload also "SlimKat 4.9 weekly 3921 - 2014.05.05" : i will on monday.
To all: feel free to request the port of any Galaxy S I9000 or Vibrant rom.
When i will have some spare time i will port them to Captivate.
Downloading SLIMKAT! Thx!!!
Edit: It's amazing your work on SlimKat, really, really fast. Great job
Rezakorn said:
Downloading SLIMKAT! Thx!!!
Edit: It's amazing your work on SlimKat, really, really fast. Great job
Click to expand...
Click to collapse
Thank You.
Mainly Semaphore Kernel has the merit to make "SlimKat stable 3" so fast.
You can tweak it with Semaphore Manager app (i suggest SmartassV2 and ROW)
Maybe i will incorporate Semaphore Kernel in next ports...
On the other hand if i use CM11 as standard kernel, users can flash later Semaphore or NeatKernel, and maybe reflash rom if they want CM11 kernel.
So they have 3 different kernel options (CM11, Semaphore and NeatKernel)
only kitkat?
http://forum.xda-developers.com/showthread.php?t=2660668
can u please port this rom with it's integrated kernel ..sorry for asking. I know port a kernel is difficult ..just asking
thank you for ur great work..
Cool! Thank You!
Personally, which combination gives more battery life??
ajeesh vijayan said:
http://forum.xda-developers.com/showthread.php?t=2660668
can u please port this rom with it's integrated kernel ..sorry for asking. I know port a kernel is difficult ..just asking
thank you for ur great work..
Click to expand...
Click to collapse
I was also going to ask for this but kind of hesitated since it is ICS. People using this are extremely happy with it.
Also @Monfro could you please add the Md5ums of the files if it is not much trouble?
And of course thanks for your work!
ajeesh vijayan said:
http://forum.xda-developers.com/showthread.php?t=2660668
can u please port this rom with it's integrated kernel ..sorry for asking. I know port a kernel is difficult ..just asking
thank you for ur great work..
Click to expand...
Click to collapse
eNemy- said:
I was also going to ask for this but kind of hesitated since it is ICS. People using this are extremely happy with it.
Also @Monfro could you please add the Md5ums of the files if it is not much trouble?
And of course thanks for your work!
Click to expand...
Click to collapse
Probably this week i will work on it; i have seen too a lot of people happy with it.
From my personal experience i remember that AOKP was the fastest ICS rom, and when 4.1 Jelly Bean was out it was smoother, thanks to project butter. So i think that 4.1 and 4.3 should be both faster than 4.0 ICS. Anyway we will see soon...
I have noticed that i made a mistake on both versions of OmniRom i posted.
I uploaded the new corrected versions, so OmniRoms now are good to go.
Monfro said:
SOME NEW PORTED 4.4.2 KITKAT ROMS FOR SAMSUNG CAPTIVATE
Click to expand...
Click to collapse
My Slimkat is very smooth and fast but I can't get root access any suggestions?
- Posted SlimKat build.4.9 with NeatKernel.
- Posted MackayROM CM9 with GearKernel.
Posted gapps for ICS 4.0 (removed everything about FaceUnlock: no front camera on Captivate)
Avikar said:
My Slimkat is very smooth and fast but I can't get root access any suggestions?
Click to expand...
Click to collapse
Settings/About: tap build number many times to activate developer options, and in developer options select root: apps and adb.
Thanks.
Monfro said:
- Posted SlimKat build.4.9 with NeatKernel.
- Posted MackayROM CM9 with GearKernel.
Posted gapps for ICS 4.0 (removed everything about FaceUnlock: no front camera on Captivate)
Settings/About: tap build number many times to activate developer options, and in developer options select root: apps and adb.
Click to expand...
Click to collapse
Loving it!!!!!
you. are so fast...anybody tried new cm9? how's it ..is it having universal gear kernel ..I had problem with gear kernel (lost imei) before ...
ajeesh vijayan said:
you. are so fast...anybody tried new cm9? how's it ..is it having universal gear kernel ..I had problem with gear kernel (lost imei) before ...
Click to expand...
Click to collapse
It packs GearKernel for ICS, not universal version.
It should be ok.
I decided to use it since it is based on Semaphore, also adding OC steps and it is updated.
There are also a lot of other ICS kernels available.
If you want to be sure before flashing make a backup of EFS folder.
If you will lose the IMEI flash a 4.3 rom like Slim and IMEI will be back.
I forget to write that the rom and kernel have the BigMem mod.
Please report feedbacks on this and other roms.
And also on kernels for 4.4.2 roms...better to use as stock NeatKernel, Semaphore or plain CM11??
Monfro said:
- Posted SlimKat build.4.9 with NeatKernel.
- Posted MackayROM CM9 with GearKernel.
Posted gapps for ICS 4.0 (removed everything about FaceUnlock: no front camera on Captivate)
Click to expand...
Click to collapse
E: Cant mount / sdcard
E: Cant mount / external_sd
I formatted my cappy back to stock and then even same problem persists.
Avikar said:
E: Cant mount / sdcard
E: Cant mount / external_sd
I formatted my cappy back to stock and then even same problem persists.
Click to expand...
Click to collapse
MackayROM CM9??
Since i can't it now:
Can you please flash the rom and then directly one of these kernels (flash rom+kernel then reboot):
Semaphore 1.3
Semaphore 1.2.6
Please let me know
Monfro said:
MackayROM CM9??
Since i can't it now:
Can you please flash the rom and then directly one of these kernels (flash rom+kernel then reboot):
Semaphore 1.3
Semaphore 1.2.6
Please let me know
Click to expand...
Click to collapse
Dear Monfro,
It goes like this:
1: Boot to recovery.
2: Wipe data + cache
3: install MackayROM CM9 from sd card:: It restarts itself and boot to recovery.
4: install from sd card/ external_sd :: and then no memory exists there.
5: I have to go back to stock every time.
Avikar said:
Dear Monfro,
It goes like this:
1: Boot to recovery.
2: Wipe data + cache
3: install MackayROM CM9 from sd card:: It restarts itself and boot to recovery.
4: install from sd card/ external_sd :: and then no memory exists there.
5: I have to go back to stock every time.
Click to expand...
Click to collapse
I forget CM9 is on an old partition layout.
Flash the first time: it converts partitions to the layout used in CM9, then it reboots to the recovery just flashed.
It is normal this way.
Flash the second time: it installs the rom.
But you can't since /sd card and /external_sd are not mounted.
Try this: flash one of the semaphore kernel i linked. reboot recovery and then flash rom.
Tomorrow or the day after i will post again the rom with some modifications.