Related
I am writing on this thread as i still cannot add to the development thread yet
I am using Elelinux-7.0.0-Hero-v2.0. Thanks Ele for a great rom.
So far the only problem i have had is once the unlock screen went invisible on me.
I had to use the patch which worked fine. no black screen. everything else works great so far.
Just trying to contribute to the developers what i can to help.
Any one else has any issue yet.
Elelinux-7.0.0-Hero-v2.0
RADIO VERSION:63.18.55.06SU_6.35.17.03
Kernel: Herokernel-12a
I've had the same issue with the lockscreen but like yourself it was a once off.
Generally the ROM is great (however, this is the first ROM that I've flashed to my hero)
The only other issue im getting is with linking facebook with my contacts; for some reason FB keeps crashing. But keep in mind that I'm a retard in comparison to what you lads know about custom roms etc..... but slowly learning!
Sent from my Hero using XDA App
same problems
I have had the same problems as you. lock screen went invisible a couple of times. and my facebook does not work quite right.
Apart from that has been very stable. no problems or reboots. works great.
Running gingerbread with honeycomb theme on my hero. running at 691mhz is well good.
I have got widgets running on every screen to.
Elelinux RC4 version 7.0 V2.0
kernel 12a
691mhz
clockworkmod.
Thanks Ele for a great rom
After installed 2.0 patch, I still get blank screen (wall paper ok, no any widgets).
The only way to solve is restart
Any thing wrong with my installation? (same spec as above post)
The Bug seems to affect some phones and not others. Might be due to different hardware but not sure.
I am a network engineer. Not a developer.
There is a patch that fixes the black screen bug which might help. You might have to delete dalvik cache first though. But as said not a developer.
I just wanted to try some different roms and loaded cronos rom yesterday and is very good. So running that at the moment.
It is really fast and stable. The fastest i have used so far. But i have not tested everything yet like GPS. But admit i am becoming a cronos fan.
Cheers.
P.s i always backup my phone first and do a complete wipe before trying a new rom. Otherwise could get problems.
I use clockwork mod.
Unfortunately the bug your getting with black screens, invisible menus etc.. is an aosp bug that affects some devices which Google are unable to fix, if you had read through the thread you would have seen this. Ele is working hard on a fix for this but as CM no longer support the hero, its unlikely many cm7 roms will see many updates.
Sent from my HTC Hero using XDA App
Everyone is hoping that Google will fix the memleak and invisible manus problem. To fix it, one needs to undersatand the big picture on how these things are managed. I think it can be done only by experienced coder.
It's a real shame. i love gingerbread and did not want to go back to 2.1 or 2.2.
But might have to if they do not fix it.
I know Ele is working hard on a fix. using his rom at the moment. Was using cronos. But suddenly started getting random reboots and battery started only lasting a few hours and could not find out why.
Thanks to all devs and help.
Elelinux 7.0 v2.1 GPS reboot issue
Hi all,
I found Elelinux 7.0 v2.1 to be almost perfect.
The only major issue so far for me is that when running applications such as sportstracker that use GPS and are running in the background, that as soon as the GPS connection is lost (for whatever reason) the phone always seems to crash.
I wonder whether anyone else has seen this issue and whether there's a way to investigate it.
E.g. is it possible ot redirect logcat to the sdcard and then analyze the log file?
Regards,
MJ
Her0 V2.1 - USB problem
This is a weird one...
I flashed to Elelinux 's fab 2.1 the usual way....
I booted into the ClockworkMod Recovery V2.5.0.7
-- wipe cache partition
-- Advanced - Wipe Dalvik Cache
-- reboot
Then again within Clockwork Recovery I choose 'Install zip from sdcard'
I select the Hero rom and it flashes perfectly...
Now the problem ----> I cant get the usb port working to enable transfer of files?
When the phone boots up it shows 'preparing sd card'
Then when i connect usb lead to pc it shows 'usb connected'
When i then pull the screen down, i see 'usb connected - select to copy files to/from your computer'
When i select that tab, it just crashes back to the home page?
I see the icon at the top of the screen but when i pull down the screen and select as above, it crashes back to home screen again?
In settings, i have both USB debugging and USB debugging notify - all enabled.
Can anyone provide a solution to this issue for me..
thank you
The only way around this problem i think is to mount usb storage from recovery.
Sent from my HTC Hero using XDA App
Hello.
This is where you can look at the tutorial and get the files to install if you feel like jumping into it ...
ICS Step by step and files
Note: if you do flash this and it hangs at the boot screen, pull the battery and flash it again and it should work. Some have had to do it 3 times.
I take no credit for this ROM and full props go to the developers of the above post and all those working to make this happen.
First the look and feel of ICS is nothing short of superb. The speed as of now is similar to all the other ROMS I have tried with a little chop here and there but nothing major.
Yes lots of little issues and items that do not work like the camera and GPS but not a huge deal for me so I am willing to stick to it.
Battery so far is decent. 13 hours and 43 min. on the first charge to calibrate and sitting at 24% still. This included allot of playing with the phone and reboots to test jigs
As for the issues that are somewhat bothersome, they include the following.
1. No home or search button. I know same as usual when installing an i9000 ROM but the key mappings from the GB ROMS does not work.
2. BLN (issue all around) will remain lit until you wake the phone to get the notification.
3. They had to do some funky stuff to get 3G to work so it lags to start. Not a huge deal cause it does start and remain working.
I will be continuing to use this ROM and hopefully everything will be working soon (these guys are flying. Also I have been told that the folks over at Glitch are already working on the kernels for the ICS port so that is promising as well.
If there are any other out there running this on our phone chime in with your thoughts or fixes if you have any.
Thanx
Bucky
Thanks for starting this thread. Can't wait to hear about your progress.
Alpha 7
Hey here is the update ...
Installed the Alpha 7 update today and I have to say this rom is fantastic.
1. Camera is fixed and works like a charm.
2. GPS locked in seconds and accurate indoors!! Big improvment over all other roms I have used.
3. HW Acceleration is fixed and working from what I can tell
4. You Tube is fixed and can watch video
Still on the not working list
1. Can not plug the phone in while off as it just restarts. this is a work in progress and known issue
2. Can not record video
3. Will not read a SIM card for contacts and so on (thank god for Google sync)
4. Still no home or search buttons (I think I may need to work on that on myself unless a kernel is released)
SO my review so far ...
No real issues with the general use of the phone. Text, phone, email and web are solid, I have installed apps from the market with no issues and not one FC yet. Battery life is good and nothing is taking over. I have been able to use the phone all day and still have lots left over before going to bed and plugging in. I have not been through a full battery as of yet but that is what I am working on now.
Memory - Last I looked I had 174MB of memory remaining which is the highest I have seen.
ICS is really smooth and fast while moving around. I am going to continue to play with it and report back here for everyone.
I don't use a whole lot of apps so there won't be much regarding those.
Thanx for stopping by and I will post pics when I can.
Bucky
Nevermind
Sent from my SCH-I500 using XDA App
Thanks for the update. From your review, it sounds like an awesome rom. Can't wait to try it but need them to fix the video recording first. Although I might just cave and try it out just to see what the fuss is all about
Can always restore my current setup... lol.
Update ...
been getting the SOD today and not sure why, I mentioned above that the HW acceleration was working, I misunderstood and it is not fully working yet.
I found that the system partition is very small. There was an update which required copying libs and there was not enough space left to do this (2MB). Not too sure if this is due to coming from MIUI or just a ROM issue.
Alpha 8 was released but had quite a few issues so not flashing that one.
Daily use has been great so far (except for the SOD) with no reception or data issues.
I am still working on the home and search buttons but I think that will get fixed with a kernel update. I tried the keymap file but these buttons do not even register in recovery so I get nothing in the ROM either.
More to come ...
Haven't tried this (likely won't as I need the phone for work) but buck have you tried the manual key fix - some directions in our thread on putting on Darkys 10.3.
Sent from T959D running Miui
Yup been there done that no go
Sent from my GT-I9000 using XDA App
Hey buck , was doing some searching in teamhacksung's thread about their ICS port, and someone suggested to change the following and then the key mapping for our phones will work properly. Not sure if the file system is the same for both, but definitely a bit of info if it isn't!
All you have to do is change this part on**arch/arm/mach-s5pv210/mach-aries.c*
*Original**(line 1216~1221)
static const int touch_keypad_code[] = {
#if defined (CONFIG_SAMSUNG_GALAXYS) || defined (CONFIG_SAMSUNG_GALAXYSB)
KEY_MENU,
KEY_BACK,
*0,*
*0*
----------------------------------------------------------------------------*
*Edited*
static const int touch_keypad_code[] = {
#if defined (CONFIG_SAMSUNG_GALAXYS) || defined (CONFIG_SAMSUNG_GALAXYSB)
KEY_MENU,
KEY_BACK,
*KEY_HOME,*
*KEY_SEARCH*
Sent from my GT-I9000 (T959 mod) using XDA App
Thank for the input. After flashing bata 1 all the buttons are working. More to come: )
Sent from my GT-I9000 using XDA App
Hey, have a telus fascinate too. Know how to flash and all that fun stuff. Just don't fully follow where you make the changes for key mapping...if you could just guide me in the right direction, I can figure the rest out...
changes in the kernel zip? the beta zip? after flashing? something completely different?
thanks a lot!
There are no changes to be made with this ROM, they are built in. Just flash and all good.
I will post update tonight after work.
Sent from my GT-I9000 using XDA App
yeah sorry realized that immediately after posting / flashing to the new rom.
have you tried out BT audio? I can connect to different devices but audio won't stream
havoksupertwit said:
yeah sorry realized that immediately after posting / flashing to the new rom.
have you tried out BT audio? I can connect to different devices but audio won't stream
Click to expand...
Click to collapse
There are allot of BT related posts in the QA. I personally do not use any BT but I do have a headset that I will try when I get home.
Seems to be a battery drain issue too as my phone is now dead but I have not calibrated so we will see after I do that.
bucknetbucky said:
Seems to be a battery drain issue too as my phone is now dead but I have not calibrated so we will see after I do that.
Click to expand...
Click to collapse
Calibrated my phone this morning. Heavy use today configuring everything but about 52% now (sooo 5 hours or use?)
Why god! Whhyyy!!
bucknetbucky said:
There are allot of BT related posts in the QA. I personally do not use any BT but I do have a headset that I will try when I get home.
Seems to be a battery drain issue too as my phone is now dead but I have not calibrated so we will see after I do that.
Click to expand...
Click to collapse
AT LEAST YOU GUYS HAVE IT RUNNING!!
I am having a hell of a time trying to get it to work. I have tried so many different ways to get it up and running but no luck.
I've tried installing it from MIUI 3 times but all I get when trying to boot into ICS for the first time is a Black Screen after the FuguMod boot screen.
The funny thing is that the 4 soft buttons at the bottom light up still.
So I then decided to try the JVT way:
-Flashed JVT DARKYROM (ODIN)
-Lagfix OFF
-FULL WIPEs (factory reset, cache, dalvik)
-FLASHED CM7.1 STABLE
-FULL WIPEs (factory reset, cache, dalvik)
-Flash ICS BETA1
-Flash kernel
-FOR THE SECOND TIME:
-Flash ICS BETA1 AGAIN
-Flash kernel AGAIN
Same issue, black screen after the FuguMod boot screen, buttons still light up.
So i tried a couple more times in a few different ways based off what I have already tried, but this time, before booting into ICS for the first time, I installed the 'Superuser-3.0.6-efgh-signed.zip' package.
Same issue. I'm not having any luck here.
iwebsource said:
AT LEAST YOU GUYS HAVE IT RUNNING!!
I am having a hell of a time trying to get it to work. I have tried so many different ways to get it up and running but no luck.
I've tried installing it from MIUI 3 times but all I get when trying to boot into ICS for the first time is a Black Screen after the FuguMod boot screen.
The funny thing is that the 4 soft buttons at the bottom light up still.
So I then decided to try the JVT way:
-Flashed JVT DARKYROM (ODIN)
-Lagfix OFF
-FULL WIPEs (factory reset, cache, dalvik)
-FLASHED CM7.1 STABLE
-FULL WIPEs (factory reset, cache, dalvik)
-Flash ICS BETA1
-Flash kernel
-FOR THE SECOND TIME:
-Flash ICS BETA1 AGAIN
-Flash kernel AGAIN
Same issue, black screen after the FuguMod boot screen, buttons still light up.
So i tried a couple more times in a few different ways based off what I have already tried, but this time, before booting into ICS for the first time, I installed the 'Superuser-3.0.6-efgh-signed.zip' package.
Same issue. I'm not having any luck here.
Click to expand...
Click to collapse
OK so here is what I did ...
Started from MIUI 1.11.18
1. Do a nandroid backup
2. download all the files to the SD card. This includes the ROM, Kernel and super user fix
Links:
Kernel:http://ice-cream-sandwich-sgs.googlecode.com/files/FuguModICS_GT-I9000_update.zip
ROM:http://ice-cream-sandwich-sgs.googlecode.com/files/ICS_4.0.1_r1-Beta1-i9000.zip
Super User:http://ice-cream-sandwich-sgs.googlecode.com/files/Superuser-3.0.6-efgh-signed.zip
3. Boot to recovery and do factory reset, wipe cache and davlik cache
4. Install the Kernel first and reboot now
5. Boot into recovery factory reset and wipe cache and Davlik and Install the ROM then reboot now
6 Boot back to recovery and install the Kernel again with out the wipe
7. If after reboot you do not have root then boot to recovery and flash super user fix
8. reboot and it should be working at least it was for me
It seems to me that you are missing the first flash of the kernel before the ROM. It sets up the file system from what I gather
Note: If needed flash the kernel and rom then kernel again with all the wipes as mentioned above.
I know there are allot of folks having issues getting it to run. Not too sure if it was the way I installed MIUI that might have made the difference.
My battery is charging now so I can calibrate it and see how it goes after that (it drained pretty quick today) lol.
I hope you can get it going cause it truly is awesome
Still not working:
Can not charge with the phone off
Google TTS stops working
Phone will not vibrate for SMS or email when in silent mode
BLN stays on for notifications until the phone is taken out of sleep (can be turned off)
Compass is why off (have not attempted to calibrate yet though)
11 MB left in the system partition (not much but I do not think there will be many changes there)
Video play back is choppy and some will not play
Bucky
regarding the black screen:
- had that too... I let it sit on the black screen for 2-3 minutes and then it went to the boot screen animation (a multi-coloured )...that for a few minutes...then finally booted.
How i got it working:
a) Started on MIUI...booted into clockwork
b) Backup
c) Wipe data / factory reset and cache and dalvik cache
d) Install rom and then kernel
e) Restart
f) Install rom and then kernel
g) Restart and wait very patiently for a little while
h) Once it all works, can reboot into clockwork and install superuser
Good luck! I really think the rom is nearly stable enough for daily use...
-------
Also have the no vibrate on silent... haven't tried the other stuff yet.
Oh and TTS hasn't crashed on this version yet for me...
Astrid glitches a little to a lot.
Changing from google tts to picco tts solves the problem there. As for the other stuff it is all reported as known.
I am using as a daily on my phone and no issues with general use. Still testing battery and that seems to be a bit of an issue with regard to Android OS as usual
Sent from my GT-I9000 using XDA App
So to install this ROM I would just have to install it as per totallydubbed's instructions? I don't want to flash miui if I don't have to to try this out.
Sent from my GT-I9000 (T959 mod) using XDA App
Hi - I'm very new to the forum and less new to custom ROMs and software.
In the last few days I installed solk2's unofficial CyanogenMod port, 20140711 root build. Went well; overjoyed to be rid of Samsung's bloatware. Thanks!
Since then, updated to first 20140808 and now 20140813. Used CWM recovery (installed via theunlockr dot com/2013/12/09/install-custom-recovery-samsung-galaxy-s4-gt-i9506shv-e330s/) directly instead of CM Updater - updater downloads the builds but when it reboots into recovery to apply them the process there cannot find the build file to install.
I've noticed:
1) When making / receiving calls, the face sensor doesn't appear to work any more - before CM, the sensor would notice when the phone is held to my cheek and blank the display, and light it up when I move the phone away. No longer.
2) The front start button doesn't appear to wake up the device from sleep any more (maybe I've missed a setting to toggle for that?)
3) the CM updater doesn't appear to work, as mentioned above
4) CyanDelta doesn't know about this set of nightlies I think - I've tried it a couple of times and it doesn't pick up deltas
5) the power button doesn't wake the device when it has darkened due to being on a call; instead it may cause the device to flash its screen up but then immediately darken again
1 & 5 make it quite difficult to control the phone during calls. Initially I thought this might have to do with ShakeCall, but the issues persist after uninstalling that.
I've cleared my cache and dalvik cache after the most recent flash to 0813.
I should say, this is relating to http://forum.xda-developers.com/showthread.php?t=2767448 and I'd have posted there but I cannot yet.
This is still an issue for me with cm-11-20140909.
Is there anything I can do to help find and fix these items?
Is this the right place to ask, even? Does @solk2 work?
pfm102 said:
This is still an issue for me with cm-11-20140909.
Is there anything I can do to help find and fix these items?
Click to expand...
Click to collapse
Proximity sensor fixed a long ago. There something wrong in yours phone. Install this recovery. Then try clean install of latest nightly or SNAPSHOT-M10 and set update recovery in Developer settings. Recovery you have has different mount points so thats why it can't find updates.
Delta updates isn't supported though.
solk2 said:
Proximity sensor fixed a long ago. There something wrong in yours phone. Install this recovery. Then try clean install of latest nightly or SNAPSHOT-M10 and set update recovery in Developer settings. Recovery you have has different mount points so thats why it can't find updates.
Delta updates isn't supported though.
Click to expand...
Click to collapse
Thank you very much - I'm running 20140914 and the proximity sensor now works during calls.
Hello everyone!
I have been experiencing a strange issue with almost all the Marshmallow ROMs currently in the development section. The Phone boots, Setup Wizard runs, and in between, the screen freezes/hangs and after 5-10 seconds the phone reboots. Again the setup wizard runs and even if i'm able to complete the wizard, the phone frequently hangs and then reboots.
I had been running Paranoid Android 5.1 ROM before flashing the Marshmallow ROM and this strange issue suddenly started. I have tried to flash stock rom and then flash twrp, then flash the ROM, even wiped everything several times. Still the same issue persists. This is really getting annoying as i have tried 3-4 different ROMs and 2 GApps and still the screen freezes and then phone reboots.
And this happens only on Marshmallow ROMs as i again have currently installed Chroma 5.1.1 ROM and its running smoothly. I am beginning to think of it to be a hardware issue. Can anyone help me solve this?
imrock0 said:
Hello everyone!
I have been experiencing a strange issue with almost all the Marshmallow ROMs currently in the development section. The Phone boots, Setup Wizard runs, and in between, the screen freezes/hangs and after 5-10 seconds the phone reboots. Again the setup wizard runs and even if i'm able to complete the wizard, the phone frequently hangs and then reboots.
I had been running Paranoid Android 5.1 ROM before flashing the Marshmallow ROM and this strange issue suddenly started. I have tried to flash stock rom and then flash twrp, then flash the ROM, even wiped everything several times. Still the same issue persists. This is really getting annoying as i have tried 3-4 different ROMs and 2 GApps and still the screen freezes and then phone reboots.
And this happens only on Marshmallow ROMs as i again have currently installed Chroma 5.1.1 ROM and its running smoothly. I am beginning to think of it to be a hardware issue. Can anyone help me solve this?
Click to expand...
Click to collapse
Flash Frank ROM, Flash Tuxi Gapps from Frank's OP, no one is having any issues now. Also don't forget to do a factory reset if you can even the Internal data.
sidnoit22 said:
Flash Frank ROM, Flash Tuxi Gapps from Frank's OP, no one is having any issues now. Also don't forget to do a factory reset if you can even the Internal data.
Click to expand...
Click to collapse
I have done factory reset several times. Even flashed stock via fastboot multiple times. Done the exact same steps you mentioned. Its not only with Frank ROM actually, i tried another Marshmallow ROM and the same thing happened again.
How is it that Lollipop ROMs are running smooth and Marshmallow ROMs are crashing?
imrock0 said:
I have done factory reset several times. Even flashed stock via fastboot multiple times. Done the exact same steps you mentioned. Its not only with Frank ROM actually, i tried another Marshmallow ROM and the same thing happened again.
How is it that Lollipop ROMs are running smooth and Marshmallow ROMs are crashing?
Click to expand...
Click to collapse
seems like it's Gapps/ ROM problem (with setup wizard)
this my only suggestions:
1. try to flash Frank's M without Gapps > reboot normaly
if this worked, then it's related to Gapps issue...
if it still remains, then
2. Flash ROM, Gapps, wipe, etc.
after that back to home of TWRP > Mount > Mount system > back > Advanced > File manager > go to /system/priv-app
search for folder name related to Setup wizard/ Google setup wizard (NOT GooglePartnerSetup) > delete it > reboot
3. fingercrossed it will bring you to home screen without any problem...
good luck then :fingers-crossed:
yayakuya said:
seems like it's Gapps/ ROM problem (with setup wizard)
this my only suggestions:
1. try to flash Frank's M without Gapps > reboot normaly
if this worked, then it's related to Gapps issue...
if it still remains, then
2. Flash ROM, Gapps, wipe, etc.
after that back to home of TWRP > Mount > Mount system > back > Advanced > File manager > go to /system/priv-app
search for folder name related to Setup wizard/ Google setup wizard (NOT GooglePartnerSetup) > delete it > reboot
3. fingercrossed it will bring you to home screen without any problem...
good luck then :fingers-crossed:
Click to expand...
Click to collapse
Thanks i'll try this out when i get back home. Although i did try flashing just the ROM to see if GApps were causing the issue. Without GApps, the phone booted to the homescreen, but then after 5-10 mins would reboot itself. I don't know may be it has got something to do with temperature? Because i've noticed that the phone becomes very hot when it first boots up on a new ROM(i know its normal for it to get hot). But when i used the phone on a Marshmallow ROM when the phone was NOT hot, it went on pretty well for 20-30 mins and then again rebooted.
yayakuya said:
seems like it's Gapps/ ROM problem (with setup wizard)
this my only suggestions:
1. try to flash Frank's M without Gapps > reboot normaly
if this worked, then it's related to Gapps issue...
if it still remains, then
2. Flash ROM, Gapps, wipe, etc.
after that back to home of TWRP > Mount > Mount system > back > Advanced > File manager > go to /system/priv-app
search for folder name related to Setup wizard/ Google setup wizard (NOT GooglePartnerSetup) > delete it > reboot
3. fingercrossed it will bring you to home screen without any problem...
good luck then :fingers-crossed:
Click to expand...
Click to collapse
Here's another update. I tried the new Chroma Marshmallow ROM and it too had the same issue. The phone hangs/freezes randomly and then reboots. After trying so many ROMs, i think the issue is with hardware itself. None other has reported this issue, nor could i find it anywhere else. I guess i can say that my(and only my) nexus 4 is not compatible with Marshmallow officially and unofficially.
I don't know what kernel Frank's uses but you could always try to flash an alternate kernel. I haven't taken the jump to Marshmallow yet, but it seems TaUrUs and hellsCore support M (I currently use hellsCore with stock L).
bjb2 said:
I don't know what kernel Frank's uses but you could always try to flash an alternate kernel. I haven't taken the jump to Marshmallow yet, but it seems TaUrUs and hellsCore support M (I currently use hellsCore with stock L).
Click to expand...
Click to collapse
I'll try another kernel and ping back.
Probably lacked boot the system before you install GApps.
imrock0 said:
I'll try another kernel and ping back.
Click to expand...
Click to collapse
The FC of Setup Wizard is discussed in the ROM thread of Chroma.
You can try this because it is advised by the Dev of Chroma and supported by many others and I have succeeded with this.
Flash stock L and boot up.
Boot into TWRP (make sure you have the latest) and factory reset.
Flash Chroma 1/11/2015 and Bank's Gapps without boot/reboot in between and no wipe afterwards.
Reboot.
---------- Post added at 07:03 PM ---------- Previous post was at 07:00 PM ----------
webg3brasil said:
Probably lacked boot the system before you install GApps.
Click to expand...
Click to collapse
At least for Chroma, that is a wrong approach. No boot between ROM and Gapps flash.
Make sure you have permissions granted to all of the apps. I had similar issues, and had to do with Location and apps making calls to GPS. Would cause a reboot, and not just a force close. Try amending the Location settings as well. All else fails, capture a logcat.
Everyone thanks for your time!
I found the solution. bjb2's suggestion did the trick. I flashed TaUrUs-Mallow Kernel after Frank Marshmallow ROM and everything seems fine now. Have been running Marshmallow since a day without any issues. Still it's curious why the stock kernel gave such errors.
Thanks everyone again for your suggestions and help
(Edit 1) Found a fix already! Read post 2!!!
Hello there,
I've been having a OnePlus Two since 4 months already, and had like 2 or 3 home button not working issues.
They used to fixed by themselves after a couple of days of not working, but not this last time.
I tried already the reinstalling system (after formatting system via TWRP), clean it several times, hard reset (hold power button for more than 20 seconds), complete drain battery and fully charge it again, force stop fingerprint service, take out the tempered glass screen protector, and none of those solutions worked.
I here attach (copy the link, can't upload a video directly to this post) a video in which you can see that whenever I power on the screen (still locked), the home button works for several times, but as soon as I unlock it (pattern lock) it stops working. This makes me think that the problem is software, not hardware, but as I said before, already tried reinstalling OOS 3.0, wiping system, cache, data, internal storage, etc.
I compressed the video so it wouldnt be too big, but quality is good enough, just rise the volume so you can listen to the "vibration" that the home button produce.
Any help would be appreciated.
Sincerely,
Daniel Castro
Fix for the issue!
Forum people, I found a fix!
Ok, the solution for making the home button work again (with fingerprint sensor) is the following.
-Factory reset while in OOS 3.0
-Set up everything up and then reboot into fastboot mode
-Install OOS 2.1 via fastboot (you will need to search the forums for it)
-Set up everything up and try to set up fingerprint (it wont work)
-Copy OOS 3.0 (Beta) in the root of the phone
-Reboot into stock recovery and flash OOS 3.0 (beta)
-Factory reset it and set up everything again
-Voila!
Feel free to try this method and reply to this threat or P.M. me for any help.
Sincerely,
Daniel Castro
I have the same problem
Tomorrow i'll try your method
I've posted a questione about this issue,
I think the One plus team should find a solution to this problem that afflict many users
Also, don't forget to rotate your phone 720 degrees, counter clock wise! ? hocus pocus....
DCastro555 said:
Forum people, I found a fix!
Ok, the solution for making the home button work again (with fingerprint sensor) is the following.
-Factory reset while in OOS 3.0
-Set up everything up and then reboot into fastboot mode
-Install OOS 2.1 via fastboot (you will need to search the forums for it)
-Set up everything up and try to set up fingerprint (it wont work)
-Copy OOS 3.0 (Beta) in the root of the phone
-Reboot into stock recovery and flash OOS 3.0 (beta)
-Factory reset it and set up everything again
-Voila!
Feel free to try this method and reply to this threat or P.M. me for any help.
Sincerely,
Daniel Castro
Click to expand...
Click to collapse
Will it erase my internal storage during that fast boot step? So I can backup all my data.
Sent from my ONE A2003 using Tapatalk
these fixes are all coincidences... we need to request a definitive fix from One plus team if is a software issue.
LOL9988 said:
Will it erase my internal storage during that fast boot step? So I can backup all my data.
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
It will erase everything, make a backup before starting the process.
faustin95 said:
these fixes are all coincidences... we need to request a definitive fix from One plus team if is a software issue.
Click to expand...
Click to collapse
Most probably hardware design fault, solution would be to redesign the phone and release a fixed design, will probably not happen unless oneplus3 is the solution.
And I second that it's just coincident behind these back and forth flashing of firmwares "solving" it, almost religious. But what are people to do when oneplus is not a company that takes responsibility for they're mistakes.
pitrus- said:
Most probably hardware design fault, solution would be to redesign the phone and release a fixed design, will probably not happen unless oneplus3 is the solution.
And I second that it's just coincident behind these back and forth flashing of firmwares "solving" it, almost religious. But what are people to do when oneplus is not a company that takes responsibility for they're mistakes.
Click to expand...
Click to collapse
If it works, its worth a try . And yeah, but we are not in any OnePlus Forum, neither debating about if they are gonna do anything about their own issue, we are trying to fix what an irresponsable company wont.
can we make together an official request to one plus to give us an answer or explanation about this? a lot of users are facing this issue, it's not normal
This is my second opt I bought that this problem has happened
sorry for my english
I had also tried lot of things but home button is not responsive at all.. H2os,exodus,oxygen 2.1 ,3.0 same everywhere
---------- Post added at 04:01 AM ---------- Previous post was at 03:59 AM ----------
Error is: when i open fingerprint setting
Enrollment not working try differnt finger or try again ... Nd fingerprint autotest not starting also
i've turned to stock i've updated to oxygen 3.0 bet and the button worked again
i think rooting installing twrp and installing different roms may be the cause of this issue
faustin95 said:
i think rooting installing twrp and installing different roms may be the cause of this issue
Click to expand...
Click to collapse
Unfortunately that is not the case, it's a hardware design bug.
However you can f-k up your finger scanner by damage your persistant-partition if you flash up and down between different ROM/bootloader revisions. But it's easily fixed by flashing the image file for that partition again.
pitrus- said:
Unfortunately that is not the case, it's a hardware design bug.
Click to expand...
Click to collapse
it's a driver issue
faustin95 said:
it's a driver issue
Click to expand...
Click to collapse
50/50 moisture sensitivity and driver issue.
Home button has been working fine for a year, installed 3.0.1 today and suddenly home button only works in OOS 3.0.1. No longer works in CM 13, yet works fine in OOS 3.0.1. Definitely a driver issue.
Tried installing OOS 2.2.1, wiping, then installing Grarak's CM 13 and home button refuses to work. Wiped system, data, cache, installed OOS 3.0.1 and home button works again. Tried wiping again and installed CM 13, home button stopped working. Wiped and reinstalled OOS 3.0.1, home button works again.
Odd thing, my phone will only work with CM13 roms and OOS 2.2.0 or less for fps and home button. Nothing will fix or ever work.
For me, the home button stopped working for a short while on Graraks, then it just jumped back to life again and I haven't had any more home button blackouts after that. If it's a driver issue, it's an extremely intermittent one.
The fingerprint scanner has stopped working from time to time at lockscreen, but this is acceptable for an official hackjobb supported scanner until official sources are released ?
Need Help with this!
Hi everyone!
I have a OP 2 for more than one and a half years now and never had any issues with it(stayed stock...) until recently. I didnt update the phone to the latest version and was putting it off, and today in the afternoon when I tried to unlock my phone it said the 'Fingerprint hardware is not available' and after unlocking the phone with the pattern, it IMMEDIATELY LOCKS ITSELF BACK !!! after split second it just locks the screen while everything is working like connection, wifi, messages, notifications, etc. but due to this I cannot access anything on the phone, can't go to settings and switch to onscreen nav bar buttons, can't force stop/wipe cache the com.fingerprints.serviceext either, tried restarting it several times, downloaded the update but can't even install it because the phone just locks! I have no idea what would fix it and I am avoiding a full reset and wipe on the phone(also based on all i have read, dont think it would fix it anyways)
If anyone knows whats the problem or has dealt with it or knows someone who has, please help me out here on how to fix this and what to do. I did not root it or flash custom ROM's on it yet so literally dont know why it happened.
Thanks,
Max