Urgent! softbricked sgy duos! - Galaxy Y GT-S5360 and Duos 6102 Q&A, Help & Troubl

hi... i flashed technoduos1.5 rom in my sgy duos...
the flashing went well but now the phone was stuck on boot logo!
i tried reflashing... all in vain
i tried flashing stock rom by odin3
it was stuck on boot.img for hours... so i had to quit!
now what should i do? i can access cwm and stock recovery... plz help me!
i hav also tried wipe data/dalvik/cache partition...
everything!
should i flash some other rom???

naman4797 said:
hi... i flashed technoduos1.5 rom in my sgy duos...
the flashing went well but now the phone was stuck on boot logo!
i tried reflashing... all in vain
i tried flashing stock rom by odin3
it was stuck on boot.img for hours... so i had to quit!
now what should i do? i can access cwm and stock recovery... plz help me!
i hav also tried wipe data/dalvik/cache partition...
everything!
should i flash some other rom???
Click to expand...
Click to collapse
download this
www.mediafire.com/?vv0do7u7pot1ykl this is stock firmware for our mobile.
Flash Via CWM as same as FlashCustom ROM,
Just Do This :
*.Put The Zip in Root SD
*.Go To Recovery Mode
*.Flash CWM
*.Mount All Partitioan
*.and Install Zip From SD
*.Choose Zip From SD
*.Reboot.
Let me know what you have done while flashing techno duos. I also flash it one time. And the same has happened with me. The problem is that kernal. Next time when you flash techno duos. Don't flash the kernal.
Hit thanks if i help you.

And remember, DON'T post question in the Dev Section again.
I'm just minding you
Edit: Ignore the above statements.
Sent from my little beast using Tapatalk 2

sonu_sonu said:
download this
www.mediafire.com/?vv0do7u7pot1ykl this is stock firmware for our mobile.
Flash Via CWM as same as FlashCustom ROM,
Just Do This :
*.Put The Zip in Root SD
*.Go To Recovery Mode
*.Flash CWM
*.Mount All Partitioan
*.and Install Zip From SD
*.Choose Zip From SD
*.Reboot.
Let me know what you have done while flashing techno duos. I also flash it one time. And the same has happened with me. The problem is that kernal. Next time when you flash techno
i already posted a question there... No reply since ages!
Click to expand...
Click to collapse

sonu_sonu said:
download this
www.mediafire.com/?vv0do7u7pot1ykl this is stock firmware for our mobile.
Flash Via CWM as same as FlashCustom ROM,
Just Do This :
*.Put The Zip in Root SD
*.Go To Recovery Mode
*.Flash CWM
*.Mount All Partitioan
*.and Install Zip From SD
*.Choose Zip From SD
*.Reboot.
Let me know what you have done while flashing techno duos. I also flash it one time. And the same has happened with me. The problem is that kernal. Next time when you flash techno duos. Don't flash the kernal.
Hit thanks if i help you.
Click to expand...
Click to collapse
Yesss... Thanks for ur reply! I now hav some confidence... And i flashed the bdsky kernel before the rom... So thats the problem?

naman4797 said:
Yesss... Thanks for ur reply! I now hav some confidence... And i flashed the bdsky kernel before the rom... So thats the problem?
Click to expand...
Click to collapse
You have to have to flash kernel before flashing technoduos 1.5 coz it does not support stock kernel...
N plz dont make thread in development section.:sly:
Sent from my GT-S6102 using xda premium

naman4797 said:
Yesss... Thanks for ur reply! I now hav some confidence... And i flashed the bdsky kernel before the rom... So thats the problem?
Click to expand...
Click to collapse
don't flash the kernal. Just flash the techno duos rom . It will work with stock rom also. Did you unbrick your mobile.

sonu_sonu said:
don't flash the kernal. Just flash the techno duos rom . It will work with stock rom also. Did you unbrick your mobile.
Click to expand...
Click to collapse
yeah maan! i unbricked it... i tried re flashing the rom but no effect... i googled a lot and found a way to revert to stock rom via odin... it gave some problems first... but when i restarted both phone amd pc it was successfuly flashed... i now am back to stock rom... alas... i should never try flashing roms now... but i hav already rooted the new stock rom... i cant live without root..

Related

[Q] Can't flash custom ROM via CWM!!!

After a number ( about 5 times) of flashing custom roms, my galaxy Y can't flash any other rom via CWM right now, it can only flash roms via Odin, which is rather incovinient... And with Odin, it can't flash a custom kernel too ( there are 2 out there already ) It show PASS! but stuck at the Samsung Galaxy Y S5360 logo . What should I do???
i think, pull out your battery and put it on again and go to recover mode (vol up+Home+power) then factory reset/data wipe. then reboot. hope this works.
if u r installing kernel on a rom then thats bound to happen.. you will get best results on a stock rom...
Try this cwm http://www.4shared.com/zip/QR4SoeIV/cwm-madteam-galaxy.html
Sent from my GT-S5360 using XDA
what error the message said?
Tried all...
Sorry to let's your hopes down (kurotsugi, simplyanin, helllock, jeffcleds ) I tried it all. But ... it still doesn't work somehow. There is no error message. It is just boot stuck ( stuck at the logo ) please help. This happens after I flash Hybrid rom V2 + wipe data + cache + battery stats. What now
flash on stock wihout cwm,does it no work flash stock or test kernel with mai77 methode and than flash stockrom,does this not work look in the threat,,soft or hardbrick help,,or something.Good Luck and greeeeeetz
CALIBAN666 said:
flash on stock wihout cwm,does it no work flash stock or test kernel with mai77 methode and than flash stockrom,does this not work look in the threat,,soft or hardbrick help,,or something.Good Luck and greeeeeetz
Click to expand...
Click to collapse
Try both with stock and CWM ( madteam + skin1980 ) not working. Restore to stock rom is possible but flashing via recovery is no go. Maybe a softbrick. I still need help through. Help please. Will appriciate everyone.
android.geek.1998 said:
Try both with stock and CWM ( madteam + skin1980 ) not working. Restore to stock rom is possible but flashing via recovery is no go. Maybe a softbrick. I still need help through. Help please. Will appriciate everyone.
Click to expand...
Click to collapse
do u have a backup of your stock rom b4 u flash a custom one? try to go cwm by skin,wide data,reset factory den restore ur stock backup.. hope it work..
vEget7 said:
do u have a backup of your stock rom b4 u flash a custom one? try to go cwm by skin,wide data,reset factory den restore ur stock backup.. hope it work..
Click to expand...
Click to collapse
Yes I do. Wipe : done all. But I'll try again later. Thanks anyway. And if my English is bad then I'm sorry... I'm a Vietnamese.
hehe,it's ok buddy.. ur sgy will b ok.. ^_^
vEget7 said:
hehe,it's ok buddy.. ur sgy will b ok.. ^_^
Click to expand...
Click to collapse
Then show me what should I do to get it "OK", because it is not "OK" at all.
did u flash a custom kernel when it happen?
vEget7 said:
did u flash a custom kernel when it happen?
Click to expand...
Click to collapse
Yes. As a matter a fact I did.
then do u have a backup of your stock kernel? if yes go to this thread http://forum.xda-developers.com/showthread.php?t=1550065 go to post # 3 then u see how to flash ur a kernel via cwm. hope dis will work.. ^_^
vEget7 said:
then do u have a backup of your stock kernel? if yes go to this thread http://forum.xda-developers.com/showthread.php?t=1550065 go to post # 3 then u see how to flash ur a kernel via cwm. hope dis will work.. ^_^
Click to expand...
Click to collapse
Actually, I already FLASH THE STOCK KERNEL with the ODIN. So... still not work.
did u try to flash via odin a fw from doky http://forum.xda-developers.com/showthread.php?t=1465800? and plz check the version of your odin?? the advisable to use is version Odin3 v1.85.exe and v1.84..
vEget7 said:
did u try to flash via odin a fw from doky http://forum.xda-developers.com/showthread.php?t=1465800? and plz check the version of your odin?? the advisable to use is version Odin3 v1.85.exe and v1.84..
Click to expand...
Click to collapse
I'm using Galaxy Y odin ( 1.84 ) and I tried 1.84. Still it doesn't work. And yes I know how to flash a firmware via odin. I'm not a pro but not a noob too .
Yes, try a different version of Odin. Try different usb ports . On my pc odin only works on one usb port. It will recognize it on the others but will cause a bad flash.
Sent from my Serendipity 6.4 flashed Captivate using xda premium
Limitz Cash said:
Yes, try a different version of Odin. Try different usb ports . On my pc odin only works on one usb port. It will recognize it on the others but will cause a bad flash.
Sent from my Serendipity 6.4 flashed Captivate using xda premium
Click to expand...
Click to collapse
Sorry but I doubt it. Odin show PASS! and I tried 4 different ports. Anyway thanks for the comment.

Soft bricked and clueless please someone!

Hey i've soft bricked my n7000..
basically i just need to know what exactly to do now, kernels etc
ideally id like to be running Midnote 3.3
anyone kind enough to reply with help would be seriously appreciated!
Maybe if you gave some more information on what how when and why ?
Nobody can help you on a 'hey i lost my car can someone tell me where on this planet i parked this morning?'
Agree on above poster. We need to know what rom uou were flashing from, by what method, and the issue now.
Sent from my GT-N7000 using xda premium
Fair enough was thinking there was a straight forward fix, as in just flash this and do this etc..
i was running Midnote 2.1, i was on LP1 and tried to flash Midnote 3.3 using CWM.. it wasn't flashing as i couldn't see the .zip rom at all..
i then done a few factory wipes and basically just wiped the davlik and cache and tried any options in CWM
The issue now is that when i boot im stuck at the samsung splash screen..
I can boot into recovery and into cwm..
And what exactly happends now ?
dead black screen ?
Samsung logo blocked ?
PC odin doesn't connect ?
Can you enter CWM recovery ?
Can you enter boot recovery ?
I think you better try and flash a safe GB kernel and rom first
Then do a full wipe, then flash whatever you like.
You can best flash through PC odin for the stock GB
friedje said:
And what exactly happends now ?
dead black screen ?
Samsung logo blocked ?
PC odin doesn't connect ?
Can you enter CWM recovery ?
Can you enter boot recovery ?
Click to expand...
Click to collapse
Stuck at Samsung logo
Can enter CWM and recovery, odin works as far as i can tell
I would suggest trying to flash a stock gb rom via pc odin. If you get stuck at the factory.fs stage you may well be superbricked because of the cwm recoveries and wipes on lpy.
There are a few threads on sorting out a problematic emmc section. But we'll get to that afyer youve tried this.
Sent from my GT-N7000 using xda premium
friedje said:
And what exactly happends now ?
dead black screen ?
Samsung logo blocked ?
PC odin doesn't connect ?
Can you enter CWM recovery ?
Can you enter boot recovery ?
I think you better try and flash a safe GB kernel and rom first
Then do a full wipe, then flash whatever you like.
You can best flash through PC odin for the stock GB
Click to expand...
Click to collapse
Thank you, I don't mean to be an effort but you hardly know where I can get a safe GB kernel and rom? i just want to be sure as im getting kind of worried now
Check out dr ketans thread in the stickies of d3velopment section. Theres loaf of info there. Its pretty straight forward if you flash initially to an older rom for your region. Take a look itll make sense promise.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
Check out dr ketans thread in the stickies of d3velopment section. Theres loaf of info there. Its pretty straight forward if you flash initially to an older rom for your region. Take a look itll make sense promise.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks bro, one thing though... i bought this n7000 fully unlocked but i think it was from Poland or somewhere does it matter if i flash a uk gb rom? stupid question i know but want to be sure.. thanks
liam.ire said:
Thanks bro, one thing though... i bought this n7000 fully unlocked but i think it was from Poland or somewhere does it matter if i flash a uk gb rom? stupid question i know but want to be sure.. thanks
Click to expand...
Click to collapse
Doesn't really matter, go ahead and choose what you like.
Lads i seriously appreciate this.. if i get my note back up n running i'll be delighted!
so if when i flash this stock gb rom using Odin i don't need a kernel at all right?
again these must be frustrating questions but your really helping me out here
liam.ire said:
Lads i seriously appreciate this.. if i get my note back up n running i'll be delighted!
so if when i flash this stock gb rom using Odin i don't need a kernel at all right?
again these must be frustrating questions but your really helping me out here
Click to expand...
Click to collapse
No, you just place the .tar file in Odin in the PDA section.
liam.ire said:
Lads i seriously appreciate this.. if i get my note back up n running i'll be delighted!
so if when i flash this stock gb rom using Odin i don't need a kernel at all right?
again these must be frustrating questions but your really helping me out here
Click to expand...
Click to collapse
nope you dont need a kernel when flashing stock GB rom
but 1st keep ur fingers crossed and pray that you get through the ODIN installation method
copy the GB rom file in ODIN folder and open ODIN and click on PDA and select the downloaded GB ROM file and press START
You legends! the stock gb rom worked perfect...
now comes the slightly trickier part.. loading the Midnote 3.3 rom
anyone using this rom? 2.1 was great!
whats the safest way to flash this, kernel wise etc?
thanks again lads
also, now that im back on the stock gb rom.. do i need to root again????
i tried getting into cwm and it brought me into android recovery mode ( still had install zip from sd option)
liam.ire said:
also, now that im back on the stock gb rom.. do i need to root again????
i tried getting into cwm and it brought me into android recovery mode ( still had install zip from sd option)
Click to expand...
Click to collapse
Yes, you will need to root it if you didn't flash a GB pre-rooted ROM.
And I think the CWM.zip file is on drketan's thread.
Guys im running midnote rom fine BUT it keeps vibrating every 5-8 seconds........................
EXTREMELY FRUSTRATING.. any ideas!???

[Q] help me...i can go to stock recovery

OMB oh my brother..
can u help me i cant back to stock recovery...
can u help me???how i can back to my stock recovery...
because my samung galY is stuck..bootloop
i has been instal new kernel with aroma instaler,then i forgotten one step when i booting my device is stuck..
how i can ack to my stock recovery??
can u help me????
please for agan agan gayoungers..
cuilanbom said:
OMB oh my brother..
can u help me i cant back to stock recovery...
can u help me???how i can back to my stock recovery...
because my samung galY is stuck..bootloop
i has been instal new kernel with aroma instaler,then i forgotten one step when i booting my device is stuck..
how i can ack to my stock recovery??
can u help me????
please for agan agan gayoungers..
Click to expand...
Click to collapse
First of all keep calm.
You will need to use odin to get your phone working back.
See for docky 73's thread in dev section (sticky one). Download your regions firmware and flash with odin. You will get everything there. For how to flash with odin read second post in that thread carefully or read in deadly's guide in general section (it is also sticky)
A Hero Can Be Anyone
[Bruce Wayne] said:
First of all keep calm.
You will need to use odin to get your phone working back.
See for docky 73's thread in dev section (sticky one). Download your regions firmware and flash with odin. You will get everything there. For how to flash with odin read second post in that thread carefully or read in deadly's guide in general section (it is also sticky)
A Hero Can Be Anyone
Click to expand...
Click to collapse
OK mas Bro.
i try it.
but my verse is dxlf1 can i replace it with dxlf1 or dxll: with odin??/
cuilanbom said:
OK mas Bro.
i try it.
but my verse is dxlf1 can i replace it with dxlf1 or dxll: with odin??/
Click to expand...
Click to collapse
You can any of those listed for your country/region.
Anything from outside should cause problems like data network not working etc.
You will need to flash csc of your region from odin again to fix that.
A Hero Can Be Anyone
[Bruce Wayne] said:
You can any of those listed for your country/region.
Anything from outside should cause problems like data network not working etc.
You will need to flash csc of your region from odin again to fix that.thx
A Hero Can Be Anyone
Click to expand...
Click to collapse
thx bro..my device is activ again..
but with odin..
i has been gived other rom n kernel.
n installed via odin its just a few minutes
cuilanbom said:
thx bro..my device is activ again..
but with odin..
i has been gived other rom n kernel.
n installed via odin its just a few minutes
Click to expand...
Click to collapse
I didn't get what you mean.
Your phone is working again?
If yes you can still flash custom kernel/rom and flash back to stock rom via odin anytime.
A Hero Can Be Anyone
Bruce Wayne said:
I didn't get what you mean.
Your phone is working again?
If yes you can still flash custom kernel/rom and flash back to stock rom via odin anytime.
A Hero Can Be Anyone
Click to expand...
Click to collapse
i flashing again with odin n flash a new kernel....
i think my hh is just not compatible with my old kernell.
thats i mean
cuilanbom said:
i flashing again with odin n flash a new kernel....
i think my hh is just not compatible with my old kernell.
thats i mean
Click to expand...
Click to collapse
hh?
Can you describe more?
Use google translate if you are having issues with english.
A Hero Can Be Anyone.
Bruce Wayne said:
hh?
Can you describe more?
Use google translate if you are having issues with english.
A Hero Can Be Anyone.
Click to expand...
Click to collapse
i flashing again my hh/ handheld/handphone/my gayung(galaxy young)
flash dxlf via odin n flash a new kernel
i am sorry if u cant understood my language.coz my linggis is bad.
i ussualy that word at kaskus
did ur phone cant go into recovery at all?
both stock or cwm?
if both i dont know either..
but if u can go any recovery just install stock kernel using aroma install by hell-fushion aroma..
stock kernel included in hell-fushion aroma..
just trying to helf,.
sent via Sony W880i

[Q]Hassan ROM won't boot!

Hello,
i downloaded the Hassan ROM from here:
http://forum.xda-developers.com/showthread.php?t=2662583
And after installing it from the CWM (the required version) i booted the device
and it is stuck on the SAMSUNG logo and wont boot up.
What can i do to fix that i really want this rom.
for now ill flash a stock rom via odin untill ill come up with a solution for that issue.
thanks for the help!
never mind i fixed it!
wow 79 views and no single answer \=
strange...
anyway i flashed a stock rom and then flashed the CWM again and installed the rom again and it worked.
(i dont know why but flashing the stock rom made it possible to install the Hassan rom, i tried to install the Hassan rom 3 times before flashing the stock)
_Fender_ said:
never mind i fixed it!
wow 79 views and no single answer \=
strange...
anyway i flashed a stock rom and then flashed the CWM again and installed the rom again and it worked.
(i dont know why but flashing the stock rom made it possible to install the Hassan rom, i tried to install the Hassan rom 3 times before flashing the stock)
Click to expand...
Click to collapse
I was in wrong thread.
Joku1981 said:
1. You dont post any details about what u were doing.
2. The people answer if they want, you cant force them.
3. If you expected faster answer... why u dont post ur problems in their correct thread if you are so interested for this ROM?
Click to expand...
Click to collapse
1. "i downloaded the Hassan ROM from here:
http://forum.xda-developers.com/show....php?t=2662583
And after installing it from the CWM (the required version) i booted the device
and it is stuck on the SAMSUNG logo and wont boot up.
What can i do to fix that i really want this rom.
for now ill flash a stock rom via odin untill ill come up with a solution for that issue.
thanks for the help!"
2. Ok but the forum is made to help people.
3.im a new user in xda forum i cant post in a developer thread. Great rule btw! realy great.

Downgrade ! ??

I have lenovo a6000 plus
With lp stock rom 5.0.1
Im downloaded cm 11 custom rom which is based on kk
How to flash this rom without pc , i have TWRP recovery
Plz help me
Thanx in adv....
rahulvikhe1 said:
I have lenovo a6000 plus
With lp stock rom 5.0.1
Im downloaded cm 11 custom rom which is based on kk
How to flash this rom without pc , i have TWRP recovery
Plz help me
Thanx in adv....
Click to expand...
Click to collapse
Just flash it normally
wipe system, data, cache, and dalvik. then flash it like usual.
Will my device(lenovo a6000) brick if I downgrade from 5.0.2 to cm11?
Benson M Kurian said:
Will my device(lenovo a6000) brick if I downgrade from 5.0.2 to cm11?
Click to expand...
Click to collapse
No it won't get bricked.
Just take a backup of the current ROM using recovery before flashing CM 11.
1. Flash ED300's Rollback .zip from here. (Source Thread by ED300.)
2. Flash your desired KK based ROM.
technocrazyboy said:
Just flash it normally
Click to expand...
Click to collapse
If you direct flash it then your devise stuck on lenovo logo .
so don't directly flash it.
got hard bricked when flashing directly
and wasted 150 rs in service center
jatin vekariya said:
If you direct flash it then your devise stuck on lenovo logo .
so don't directly flash it.
Click to expand...
Click to collapse
then how to flash
AXAz0r said:
1. Flash ED300's Rollback .zip from here. (Source Thread by ED300.)
2. Flash your desired KK based ROM.
Click to expand...
Click to collapse
can tried this method
then plz give me full tutorial
thanx
rahulvikhe1 said:
then how to flash
Click to expand...
Click to collapse
Use TWRP recovery 2.7 if you wanna flash any KK ROM.
Boot into recovery. Make backup of System ( in case you changed your mind and wanted to roll back )
Goto Wipe--> Advance wipe. Then wipe out System, Data, Cache n Dalvik cache.
Goto install, flash the ROM, and gapps. It would work fine
P.S. the instructions provided by the developer of the ROM.
rahulvikhe1 said:
then how to flash
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/lenovo-a6000/development/cm11-lenovo-a6000-plus-bugs-fixed-t3163636
rahulvikhe1 said:
then how to flash
Click to expand...
Click to collapse
just follow installation procedure in this thread
http://forum.xda-developers.com/lenovo-a6000/development/cm11-lenovo-a6000-plus-bugs-fixed-t3163636
vishal.krr said:
Use TWRP recovery 2.7 if you wanna flash any KK ROM.
Boot into recovery. Make backup of System ( in case you changed your mind and wanted to roll back )
Goto Wipe--> Advance wipe. Then wipe out System, Data, Cache n Dalvik cache.
Goto install, flash the ROM, and gapps. It would work fine
P.S. the instructions provided by the developer of the ROM.
Click to expand...
Click to collapse
i tryed this method . but my phone got bricked.
rahulvikhe1 said:
i tryed this method . but my phone got bricked.
Click to expand...
Click to collapse
Sorry to hear. Can you give me the link to the ROM you wanna use? I'll try flashing it myself first and then will reach out you.
In mean time try to flash stock ROM.
CM 11 !
vishal.krr said:
Sorry to hear. Can you give me the link to the ROM you wanna use? I'll try flashing it myself first and then will reach out you.
In mean time try to flash stock ROM.
Click to expand...
Click to collapse
Thank you for asking me seriously.
I want to flash custom or stock kitkat rom which are following:-
1.http://forum.xda-developers.com/lenovo-a6000/development/rom-cyanogenmod-11-t3331154
2.http://forum.xda-developers.com/lenovo-a6000/development/cm11-lenovo-a6000-plus-bugs-fixed-t3163636
or stock kitkat rom
thank you
rahulvikhe1 said:
Thank you for asking me seriously.
I want to flash custom or stock kitkat rom which are following:-
1.http://forum.xda-developers.com/lenovo-a6000/development/rom-cyanogenmod-11-t3331154
2.http://forum.xda-developers.com/lenovo-a6000/development/cm11-lenovo-a6000-plus-bugs-fixed-t3163636
or stock kitkat rom
thank you
Click to expand...
Click to collapse
I'll try flashing these two and get back to you ASAP!
kk thank you
which is rom u r using . can it is good for battery saving
waiting
rahulvikhe1 said:
kk thank you
which is rom u r using . can it is good for battery saving
Click to expand...
Click to collapse
Waiting
First backup ur current rom.... download kitkat firmware file by ed300 then flash it via twrp then wipe everything then agaun flash that file after that flssh cm 11 and gapps . It will work ..

Categories

Resources