I have a phone I am fixing for a friend, so I don't have a complete accurate history of what happened, so please bare with me.
Basically, you put the battery in and it boots right to download mode (Factory Mode), no power button required. I can then reboot it using the power, hold down the Vol-Down button and then I am prompted if I want to enter D/L mode, in which you can use Vol-Down to cancel and it boots like normal.
I have tried the following, nothing fixes it!
Factory Wipe
Root using CF-Auto Root
Every Key Combination Possible on Boot
Odin Stock Install
Kies Upgrade (just stalls on that)
It was not rooted when I got it, and now it is. I haven't installed any recovery yet, but am willing too. It has possible water damage, so it ain't going back to the store anytime soon. I can't even get USB Debugging to appear that it is connected, nor will ADB recognize it. But the USB is working and read/writing.
This isn't my first time working with this sort of stuff, I am just at my wits end, plus I'm a Sony/HTC/LG person, so if there is something I am missing with this wonderful(ly crappy) bootloader, let me know.
Thanks in advance!
shroomun said:
I have a phone I am fixing for a friend, so I don't have a complete accurate history of what happened, so please bare with me.
Basically, you put the battery in and it boots right to download mode (Factory Mode), no power button required. I can then reboot it using the power, hold down the Vol-Down button and then I am prompted if I want to enter D/L mode, in which you can use Vol-Down to cancel and it boots like normal.
I have tried the following, nothing fixes it!
Factory Wipe
Root using CF-Auto Root
Every Key Combination Possible on Boot
Odin Stock Install
Kies Upgrade (just stalls on that)
It was not rooted when I got it, and now it is. I haven't installed any recovery yet, but am willing too. It has possible water damage, so it ain't going back to the store anytime soon. I can't even get USB Debugging to appear that it is connected, nor will ADB recognize it. But the USB is working and read/writing.
This isn't my first time working with this sort of stuff, I am just at my wits end, plus I'm a Sony/HTC/LG person, so if there is something I am missing with this wonderful(ly crappy) bootloader, let me know.
Thanks in advance!
Click to expand...
Click to collapse
If you can hold the vol-down and home button when you boot it up and get into Odin mode you should be about to flash the stock MD5 for your phone. Stock Canadian Odin files here:
http://forum.xda-developers.com/showthread.php?t=2269304
Also make sure to use the lastest version of Odin, 3.07 I believe. After you are done flashing with Odin you will have to boot into Recovery (vol-up when booting) and do a factory reset. This has always fixed any boot problems with my phone.
Jdiesel87 said:
If you can hold the vol-down and home button when you boot it up and get into Odin mode you should be about to flash the stock MD5 for your phone. Stock Canadian Odin files here:
http://forum.xda-developers.com/showthread.php?t=2269304
Also make sure to use the lastest version of Odin, 3.07 I believe. After you are done flashing with Odin you will have to boot into Recovery (vol-up when booting) and do a factory reset. This has always fixed any boot problems with my phone.
Click to expand...
Click to collapse
So did you go into settings, more, developer mode to check usb/debug?
USB debugging isn't required to flash the Odin MD5. One thing I did notice is that you should boot into Odin download mode before connecting your USB cable. I was having issues with Odin not detecting my phone and waiting to connect the USB cable solved that.
Sent from my Nexus 7 using xda app-developers app
sloanster said:
So did you go into settings, more, developer mode to check usb/debug?
Click to expand...
Click to collapse
Duh...
I was referring going to adb fastboot
see the thing is that flashing did work fine, it just didn't fix the problem. I guess in Samsung terms I am stuck in Odin download mode when turning the phone on. This is why I wanted to see of I could push some standard reboot command via adb to see of it would "jig" it into place, but no matter what I try it always boots into download mode first.
and yes, I did turn on usb debugging
shroomun said:
see the thing is that flashing did work fine, it just didn't fix the problem. I guess in Samsung terms I am stuck in Odin download mode when turning the phone on. This is why I wanted to see of I could push some standard reboot command via adb to see of it would "jig" it into place, but no matter what I try it always boots into download mode first.
and yes, I did turn on usb debugging
Click to expand...
Click to collapse
Could you have bent pins maybe where you plug it in? Its doing exactly what a jig would do..
TheAxman said:
Could you have bent pins maybe where you plug it in? Its doing exactly what a jig would do..
Click to expand...
Click to collapse
Nothing is wrong with the pins, USB is working fine and can be used in any other mode. I got ADB finally, I guess it was just not playing nice with me before. However, still anything I try the bloody thing still insists on booting first into download mode.
Just an update, it is still booting into download mode, tried a couple different stocks and still no good result. Anyone suggest any of the options in Odin might help work? Like F Reset Time or Phone EFS Clear?
shroomun said:
Just an update, it is still booting into download mode, tried a couple different stocks and still no good result. Anyone suggest any of the options in Odin might help work? Like F Reset Time or Phone EFS Clear?
Click to expand...
Click to collapse
I have seen this elsewhere, one guy suggested, using Keis, and it took him 2-3 times to get the stock to stick.
As far as checking those items in odin, could brick the phone. he also said, he got nowhere using odin in this situation.
Have you tried maybe flashing a recovery via odin? could be the recovery is corrupt.
what does this mean: in which you can use Vol-Down to cancel and it boots like normal. <<< Can you boot to the OS?
I can imagine your frustration here...good luck.
I did try Kies and it would keep getting stuck at 10% (I let it sit overnight) so I had no luck with that...
Have you tried maybe flashing a recovery via odin? could be the recovery is corrupt.
what does this mean: in which you can use Vol-Down to cancel and it boots like normal. <<< Can you boot to the OS?
Click to expand...
Click to collapse
Yes, I have gone from stock recovery to CMW and back to Stock and still nothing. As for you other question, yes, I can boot into Android. The downside is I can't turn the phone off unless the battery is pulled out. This is why I bought an HTC One and not an S4 lol .. thank god this isn't my phone, but it is frustrating because of all the things I've tried to do to fix it.
Related
Hi All,
I need your help. I downloaded the latest update for the S4 this morning after i clicked yes for the phone to reboot. It didn't turn back on. Everytime I try to turn it on, it vibrates but it doesn't show the logo. I also tried entering the recovery mode or download mode but there's nothing on the screen. I also tried removing the battery for several minutes and then tried the things i said above.
Is there any other way I can boot this or reformat my phone? Please help.
Thank you very much in advance
Same here.. I had the same problem.. I did try reset it and go to recovery mode, once on recovery mode, i can choose any option because it automatically goes back to install the update. And then after installation it stuck at the boot screen again and can't turn on. I had my phone rooted before but I already flash my phone back to stock. During the period where i root my phone i never install any custom ROM and whatsoever..
re: odin flash - JIG
katsumotoken said:
Same here.. I had the same problem.. I did try reset it and go to recovery mode, once on recovery mode, i can choose any option because it automatically goes back to install the update. And then after installation it stuck at the boot screen again and can't turn on. I had my phone rooted before but I already flash my phone back to stock. During the period where i root my phone i never install any custom ROM and whatsoever..
Click to expand...
Click to collapse
What I would do is go to ebay or online stores and buy a USB JIG it works perfect on Samsung Galaxy S4
and other android phones. The price is right too, anywhere from $1.00 to $5.00 including shipping.
Here is a link worth looking at:
https://www.google.com/search?q=andr...icial&tbm=shop
JIGS are made for issues just like the ones you and @lasallegreen are experiencing.
All you need to do with the jig is first remove the battery from your phone for
20 seconds and replace it, then plug the USB jig into the usb port of the phone.
Wait a couple seconds or so and you will see the download mode screen.
Unplug the usb jig and load/open odin and after putting the stock rom in the
pda slot in odin connect usb cable from phone to computer.
Make sure the [COM:xx] lights up in Odin and click START.
Once odin successfully flashes the official stock rom the
phone will again be in perfect condition ready to use.
Your phone is NOT hard bricked, but most likely it is soft bricked meaning that it can be fixed to
come back to life after Odin flashing the official Samsung S4 stock firmware/rom which you can
find and download from http://SamMobile.com by searching by the model number of your phone.
Good luck!
Will try this method.. Thank you very much for your kind reply.. Will let you know of the outcome..
katsumotoken said:
Same here.. I had the same problem.. I did try reset it and go to recovery mode, once on recovery mode, i can choose any option because it automatically goes back to install the update. And then after installation it stuck at the boot screen again and can't turn on. I had my phone rooted before but I already flash my phone back to stock. During the period where i root my phone i never install any custom ROM and whatsoever..
Click to expand...
Click to collapse
i was able to flash the stock rom using odin to see if that is the problem. I was successful in flashing but there's still nothing on my screen.
update: when i leave it for a few hours or so, there are times that the screen turns on and then it boots normally but if you reboot it's back to its frozen state. I hope someone can help me with this.
I had to reboot my device due to problems with my speaker. Now i'm not able to boot anymore.
I'm only able to get into ODIN Mode, and flashing new FW or TWRP does nothing. It'll flash correctly, but as soon as it sends the reboot command the device powers off and does not boot, and no, it does not reach the "Galaxy s8, powered by android screen".
It does not want to power on, and only responds to the odin button combo, can't boot into recovery either since nothing works.
I was running the latest version of Renovate Ice if that matters.
I've searched trough some other threads, but it seems like i'm the only one that's having this problem.
Any help or thoughts would be greatly appreciated!
Edit 1: I've tried flashing both AQK7 and AQG5. Both flash fine, but as soon as odin sends the reboot command to my phone, it turns off and does not turn on.
Auto Reboot is ticked. Same goes for any version of TWRP, it will flash, but when it has to reboot the device turns off and does not turn on. There's nothing on the screen, its completely black and the only thing that does work is Download Mode. I've also tried ereasing nand, and repartitioning storage. Both seem to have 0 effect. As stated in one of my replies, i was running the latest build of renovate-ice with magisk, no other mods, or themes installed.
Im a bit confused - you can only boot into download mode (not into twrp?) and the phone is in bootloop? Have you flashed anything (mod?) before or activated a substratum theme which could cause this?
The only thing I can think of is a) you delete in twrp file manager the corrupted file, if there is something like this or b) a twrp restore from a backup. Boot into download mode and then do not press vol up to go into odin mode but press vol down to reboot - then immediately press the combo for twrp and you will get to the recovery. This helped my s8 many times when I was in a bootloop and couldnt boot up twrp
FloM94 said:
Im a bit confused - you can only boot into download mode (not into twrp?) and the phone is in bootloop? Have you flashed anything (mod?) before or activated a substratum theme which could cause this?
The only thing I can think of is a) you delete in twrp file manager the corrupted file, if there is something like this or b) a twrp restore from a backup. Boot into download mode and then do not press vol up to go into odin mode but press vol down to reboot - then immediately press the combo for twrp and you will get to the recovery. This helped my s8 many times when I was in a bootloop and couldnt boot up twrp
Click to expand...
Click to collapse
Thanks for the reply! Other than using the Renovate-Ice rom, and running magisk the thing was pretty much stock. wasn't messing around in twrp either. Its not stuck in a bootloop either, it just refuses to do anything other than go in and out of DL mode. The phone does not respond to any button imputs other than DL mode. As stated in the OP it does not boot at all, just a black screen. i've already tried to reflash a stock FW and TWRP, but that does not seem to work...
try the method I did - this is the last thing I could think of, before reflash the whole phone with odin
More info about your speaker problem
popmpopm said:
More info about your speaker problem
Click to expand...
Click to collapse
There isn't much to say about the problem ,it just stopped working, hence why i rebooted the phone, and ran in to the problem i'm having right now.
FloM94 said:
try the method I did - this is the last thing I could think of, before reflash the whole phone with odin
Click to expand...
Click to collapse
Doesn't work sadly, but thanks for the help anyways!
but you havent installed Viper4Arise or anything like that?
Because of this my speaker also stopped working a few weeks ago
if you can get into download mode then get into download mode and leave phone, then download samsung smart switch for your pc (older version like 4.1.17022_20 from here http://www.filehorse.com/download-samsung-smart-switch/29268/ that allows phone based recovery), once installed open it, then click on more at top right, (do not update the software if you get a prompt) select emergency device recovery...., then click on right tab (device initialisation) and fill in your phone details etc., connect your phone (in download mode) and follow the process, maybe it works, you'll need to root and install TWRP again but thats no big issue.
Jostian said:
if you can get into download mode then get into download mode and leave phone, then download samsung smart switch for your pc (older version like 4.1.17022_20 from here http://www.filehorse.com/download-samsung-smart-switch/29268/ that allows phone based recovery), once installed open it, then click on more at top right, (do not update the software if you get a prompt) select emergency device recovery...., then click on right tab (device initialisation) and fill in your phone details etc., connect your phone (in download mode) and follow the process, maybe it works, you'll need to root and install TWRP again but thats no big issue.
Click to expand...
Click to collapse
I've tried this just now, and it still gives me the same result, it goes trough the process, but as soon as it has to reboot it doesn't boot anymore.
Thanks for the suggestion though!
FloM94 said:
but you havent installed Viper4Arise or anything like that?
Because of this my speaker also stopped working a few weeks ago
Click to expand...
Click to collapse
i think phone is damaged by water or dropped s8 so fragile phone ! its happen to me with s5 the phone dead after speaker problem !!
popmpopm said:
i think phone is damaged by water or dropped s8 so fragile phone ! its happen to me with s5 the phone dead after speaker problem !!
Click to expand...
Click to collapse
I've had a case on the phone since day one, and I've checked for water damage, but there is non. The tab that is supposed to indicate it is untouched. But thanks for your input! I appreciate it
I have the same problem. Its look like is bootloader issue. try flash this soft :
G950FOWA1AQCC_Recovery
But if you are on newest rom it wont work.
Hello, you can solve this problem?
Hi. Browsed for ages and always come here for answers.
Here's my problem.
2x S8s. SM-950f.
Updated to most recent software through software update. Both phones were glitchy and crashing and just generally irritating after.
Factory data reset etc. This did not resolve the problems, also led to one of them having issues with FRP (annoying)
Used Odin to try and flash the latest firmware (from sammobile, UK BTU) after flashing both, they reset and powered on. Got stuck at the S8 screen.
Restarted then both were at the "an error occurred during update" screen.
Managed to get back to download screen. Re checked the software and model numbers, even that the bootloader was the correct version etc. All was fine.
Connected to Odin, shows that it is connected, but nothing happens when clicking start.
Now after attempting that, both phones will not power on.
(One will when placed on the wireless charger, but just sticks at S8 screen) and download mode or reset screen can not be accessed. So, not exactly happy. And totally out of ideas
Any suggestions, beyond taking it to a shop to see if anyone can help.
yes .....dont tuch the phones for 24 hours let the battery die ...it will...connect to pc and then try download mode....u may need to press combination for like 1 minute to get to download mode....flash twrp reboot directly into it when odin says successfully .....wipe system data ....dont turn on phone download any custom rom flash and enjoy.....it will trip knox but worth than getting a new board....
Okay, will give that a try.
TWRP?
TWRP install
https://dl.twrp.me/dreamlte/twrp-3.2.3-0-dreamlte.img.tar.html: Download link for twrp SM-G950F (dreamlte)
Just said, wait until your device powers off due battery insufficience. Plug cable and hold at the same moment vol(down)+bixby+power. Then press vol(up) at the warning screen to proceed to odin mode. Let it charging a while like 1 h. Then unplug it and plug it to your pc. In Odin select ap the previous downloaded file. Take your mobile in your hand. With one hand, prepare your fingers to vol(up)+bixby and with the other hand start the flashibg process. Be careful, and take your hand directly from the mouse if you clicked start in odin, and position your one finger to power button, but dont click. If odin start pass, press immidiately the buttons (vol(up)+bixby+power) and let it to start into recovery. If you arrived to recovery, reply to us if not search for help!!!
Good luck
memreb
Still trying to get them on. Powered on to download mode but only for a couple of seconds and switched off again.
Can't get them to power on. Buggered
simonboyle said:
Still trying to get them on. Powered on to download mode but only for a couple of seconds and switched off again.
Click to expand...
Click to collapse
i have the same issue with my s8 but when i boot in download mode the screen goes black but if i press volupe up it connect to odin with black screen you shoud give it a try
Will try that
Okay, downloaded TWRP, can get phone calls nected to Odin but when I extract TWRP it doesn't give a valid file type.
Am I being dumb.
No files appear that Odin will recognise.
Also just shows as "recovery" no .tar or anything
Ignore above. Corrupted download.
Sorted.
Now when flashing TWRP is gets to a fail due to
"Complete (write) fail
Hi you should try flashing official firmware
itac47 said:
Hi you should try flashing official firmware
Click to expand...
Click to collapse
The point of the thread us that I am.unable to do that.
So kinda useless post buddy.
Read the OP.
Anyone want two bootlooped S8s? Hahahaha
simonboyle said:
Anyone want two bootlooped S8s? Hahahaha
Click to expand...
Click to collapse
Not sure what stage your at and maybe some more useless ideas
1. Trying to flash twrp is kinda of useless if you can't get into your system need oem unlock for that.
2. Have you tried taking out Sim card and SD card and reboot.
3. If you can at least boot try smart switch as it has a emergency recovery option.
4. Trying rebooting in safe mode.
All been attempted
First it started right into Odin Mode. After holding Volume Down and Power to exit it, the screen went black (as expected). However, afterwards it won't boot up again. Tried normal boot, recovery and download. Removed the battery and put it again, didn't work. Also tried various cables and outlets. Tried the sequence for download mode (holding Power + Volume Down + Home, then pressing Volume Up - even if it didn't show anything on screen) and connected it to my PC. The computer played the sound as if a device was connected, then after some seconds Windows said that the USB device was not recognized. Odin did not recognize it either. Samsung 300K tool doesn't work as well. Do you have any suggestions, please? It's quite urgent.
Try installing official device drivers Inform us after that what's happening. Thank you
Rjt KD said:
Try installing official device drivers Inform us after that what's happening. Thank you
Click to expand...
Click to collapse
I can't. It's not booting at all. Never rooted it or changed its ROM.
You mean it doesn't even show download mood or recovery mood?
Rjt KD said:
You mean it doesn't even show download mood or recovery mood?
Click to expand...
Click to collapse
Yes, not even the charging battery logo when it is powered on. Tried using an USB Jig, fails as well.
Sent from my iPhone using Tapatalk
tomadimitrie3 said:
Yes, not even the charging battery logo when it is powered on. Tried using an USB Jig, fails as well.
Click to expand...
Click to collapse
I'm sorry to say that.. It's a hardware related issue... U need to take it to service center to repair Thank you
I've flashed marshmallow stock on stock lollipop via Odin but after completion J500H boots and immediately resets or off after first boot screen appears. so please help that why this problem is here???
Also please tell that custom ROM can be installed on the J500H or not ( bootloops and restart issue immediately)
Is it possible to flash again? If yes...
Then first wipe delvik cache then flash again, before flashing make sure to untick auto reboot on odin's log option... After flashing done don't reboot immediately first wipe delvik cache then restart...
If it doesn't allow you to flash then u need to take it to service center...
Yes it's possible to install custom rom using Odin but sometimes it fails if usb debugging is not enabled! You can search on Google for that or any thread here.
I was going along ok until I made the fatal error of transferring the Magisk patched file to PC via MTP instead of taking the time to re-learn adb, which must have corrupted it. Thus predictably Odin hung and I am in trouble.
Where I am stuck is being unable to turn the phone off to come back in download mode to start over with stock firmware. I have been unable to find any secret button presses, and the battery doesn't seem to want to die leaving me with an $800 paperweight.
I did search around for this first and didn't find any real answers. Has anyone found an effective solution to this problem? Thanks.
fastzombies said:
I was going along ok until I made the fatal error of transferring the Magisk patched file to PC via MTP instead of taking the time to re-learn adb, which must have corrupted it. Thus predictably Odin hung and I am in trouble.
Where I am stuck is being unable to turn the phone off to come back in download mode to start over with stock firmware. I have been unable to find any secret button presses, and the battery doesn't seem to want to die leaving me with an $800 paperweight.
I did search around for this first and didn't find any real answers. Has anyone found an effective solution to this problem? Thanks.
Click to expand...
Click to collapse
If Odin recognizes you device, you can flash firmware in emergency recovery.
Cindysmith0994 said:
If Odin recognizes you device, you can flash firmware in emergency recovery.
Click to expand...
Click to collapse
Thank you, but the PC won't recognize the device. What does happen is the emergency recorevy screen tries to come up. I tried starting in download mode with bixby+vol down then USB. I did get the battery low enough where I don't get the teal screen of death anymore, perhaps it is too low for USB to work? What I was hoping for was the charging animation but no luck. Surely this is just a software problem and there is a way out.
fastzombies said:
Thank you, but the PC won't recognize the device. What does happen is the emergency recorevy screen tries to come up. I tried starting in download mode with bixby+vol down then USB. I did get the battery low enough where I don't get the teal screen of death anymore, perhaps it is too low for USB to work? What I was hoping for was the charging animation but no luck. Surely this is just a software problem and there is a way out.
Click to expand...
Click to collapse
Did you try getting into recovery and perform a data factory reset and then see what happens?
Just load the stock firmware BL, Ap, cp and home csc into Odin if you see emergency teal screen. The emergency screen will start loading
Black screen ....Perhaps your battery is dead?
Thank you all for the replies. I had let the battery get low in a misguided attempt (based on advice elsewhere) to get it to shut off. I had to let it charge a while for it to wake up enough for PC to see it. Then I was able to flash in Emergency Recovery mode.
Thank you for the help.
fastzombies said:
Thank you all for the replies. I had let the battery get low in a misguided attempt (based on advice elsewhere) to get it to shut off. I had to let it charge a while for it to wake up enough for PC to see it. Then I was able to flash in Emergency Recovery mode.
Thank you for the help.
Click to expand...
Click to collapse
Glad you got your device up and running ?
Maybe someone can help me. I seemed to have borked my phone. I kept getting "Google is Stopping" with no way to fix it, so I tried reflashing my firmware in odin. After I loaded all the files and hit start, I realized I didn't untick auto reboot, so I tried aborting the installation and ended up with screen (I've had it before and got out of it by still flashing in Odin, but now, if I try to reflash firmware while in this screen, it's stuck on SYSTEM in odin.
Any help appreciated!
Try this
That is where I got stuck. Are you trying to flash stock or patched firmware? I had to start over with stock as I copied the patched via MTP instead of adb and it got corrupted.
I think what I did was unplug and reset Odin. Wait for screen to turn off, then make sure it is at least 80% charged. Then Bixby + Vol Down + plug in and you will go back to this screen. Then I was able to flash stock. I had to go so far as to re-lock bootloader and flash stock again since my "OEM Unlocking" was not just greyed out but missing. Since then I've had no time to try again, but at least I have a working phone.
This is my anecdotal procedure, can't say if it is the right or best one.
Hi All,
I was trying to flash the latest firmware for my device (G9750ZCU2ASG4) and during the odin process, my computer restarted which failed the update halfway through. I rebooted the computer, tried again, and it was trying to establish a connection for a really long time, so I disconnected my phone from the USB port on my computer, and held Power and Volume Down to try and force reboot the phone. I was going to try and go back into download mode to restart the process. My phone mentioned something about needing to do an emergency recovery, but I continued to hold down the power and volume down keys and then everything went black on the phone.
I've tried multiple USB cords, all of the button commands known for the device, and have even tried to perform the emergency mode recovery on my device, but it seems like it's in some sort of locked state; What I mean is the phone is stuck on a black screen. I can't "boot" into recovery or into download mode. The phone doesn't even vibrate when I hold the power button or power and down to try and force reboot it. Odin doesn't recognize the phone when I plug it into the computer nor does the device manager on my windows computer.
Does anyone have any experience with this sort of issue or any idea of what else I can do to try and get into download mode to flash my firmware again? All help, suggestions, or comments regarding this are much appreciated.
Sounds like the battery is dead
Hi Dude, I am struggling with the same problem, read this post and it came to me, had to come back and give you the solution.
Press bixby+volume down, IMMEDIATELY after the screen goes off, hold volume up and down while connecting the USB cable super fast.
You have got like 10ms to do it
Otherwise it just goes back to the AVB FAIL screen
Ran into this issue, none of the above worked for me.
This is how I resolved:
1) Placed phone on wireless charging mat and let it boot to emergency recovery screen
2) Load TWRP into AP slot of Odin and leave the window open on your computer ready to flash
3) Connect phone to computer whilst it's on the mat and press start in Odin as soon as your device appears
It may fail a few times but if your quick you can install TWRP.
4) Now boot into recovery and let your phone charge to a reasonable level (above 20%)
5) Boot into Download mode and flash your desired rim via Odin