Database Users

★★★ guide - tips - tricks ★★★

THIS THREAD HAS A LOT THAT IS OUT OF DATE. ANYTHING DEALING WITH GOING BACK TO STOCK OR 2.1/2.2 SHOULD BE QUESTIONED. I HAVE LITTLE INTEREST IN MAINTAINING THIS SINCE IT IS NO LONGER A STICKY/NOT VIEWED AS MUCH. PM ME IF YOU NEED HELP WITH SOMETHING.
EDIT: I am not longer updating this. CHECK HERE FOR UPDATES, if any.
WANT TO HELP ME FOR CREATING THIS POST?
It would be so helpful if as a token of thanks you used MY DROPBOX REFERRAL. By using this, we both get an additional 250 MBs.
I want to thank everyone who has done this so far!
Click to expand...
Click to collapse
Please see my other thread I created to try and be more noob-friendly towards rooting and flashing. It includes videos and two methods.
Click to expand...
Click to collapse
It can be found by clicking here.
CHANGE-LOG
Change-Log is now in post #3, but here is a link for convenience. I know a lot of you wanted this at the top... best I could do and still look how I like it.
DISCLAIMER: I am giving shared information. You are the one messing with your phone. While everything on here has been tested by me, that does not mean that you have not done something incorrectly or something has changed since this was written. You are responsible for your phone and your actions. I did not invent crying babies or 180 degree coffee. Do not sue me.
XDA member cvibe88 made some very good videos to show the whole process. I believe by watching these and reading this sticky you should have everything you need to root, backup, flash and restore. I still encourage reading all of Post 1 & 2.
Here is a link to his post with his videos!
ROOT TOPICS
HOW TO ROOT
I used TO provide instructions. Now, I prefer you read my other GUIDE FOR NOOBS. No offense, but if you are asking, this thread is better for you.
HOW TO GET INTO RECOVERY
I hold my phone horizontal when powered off.
Both thumbs on the volume rocker.
Press and hold power and volume buttons.
When the Vibrant logo comes up, release power, keep holding the volume rocker.
** some phones are hardware locked. This means you can possibly not get into either Download Mode (used for ODIN) or stock recovery (used to root and get to clockwork recovery the first time). Those who got the JI6 OTA (over the air) update had this fixed. Some people upgraded from JFD to JI6 by other methods and may still be hardware locked. There is a fix for this listed below, just in case ** I reitterate, most people are NOT HWL.
HOW TO GET INTO DOWNLOAD MODE
* Read the noob guide if you are asking why you would need this *
On PC, open ODIN
Connect USB to PC (not phone)
Pull Battery on phone and replace it
Press and hold in both volume buttons
Connect USB to phone, wait at least 3 seconds (still holding volume)
Release when you see the Yellow Triangle
IF I ROOT, WILL I GET OTA UPDATES?
Yes. Rooting will not prevent this, unless you flash a custom ROM that will block receiving the OTA update. Typically, accepting an OTA will make you lose root. Some upgrading to JI6 state they didn't lose root, I did (using ODIN), but gaining root back is so easy.
Got Root? YOU NEED A CUSTOM RECOVERY!
Big props to XDA user Koush for his amazing Rom Manager App. In short, this lets you create system backups for those "oops" moments. It also gives you a directory of ROMs for easy downloading and flashing. Yeah, it is that cool. Please see his post for instructions. After successfully installing, be sure a make a Nandroid Backup of your system before flashing any rom's (see below).
Installation instructions:
1.Download ROM Manager from the Market.
2.Flash Recovery.
3.Choose Vibrant as your phone.
4.Accept the Superuser prompt.
5.On the very FIRST boot of Clockwork, you may need to manually select "reinstall packages" if Clockwork does not start. You should only ever have to do this once. It will be automatic from then on.
6.Watch the backup go!
Click to expand...
Click to collapse
* Note, do not use the Partition option as this will partition the INTERNAL SD card, yikes *
If you were one of the unlucky ones who DID do this by mistake, you can read this thread to save the day. Thanks farrisizdaman
Free:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Premium ($3.99):
HOW TO MAKE A NANDROID BACKUP *ALWAYS BACKUP BEFORE YOU FLASH A NEW ROM
1 - Open Rom Manager
2 - Click on Flash Clockwork Recovery (you can skip this if you have already flashed the recovery before)
3 - Click on "Reboot Into Recovery"
4 - At the prompt, click "ok" to reboot into ClockworkMod Recovery
5 - If this is your first time, you may be at the stock recovery on the Vibrant. Thats normal. Click on "reinstall packages" (ALSO: Volume up and down navigate, and power is used to select an item).
6 - Now, you are at ClockworkMod's Recovery. Scroll down (volume down), to "backup and restore" and select it (power button).
7 - Click on "backup." It will run it's course. After it finishes just reboot.
8 - You now have something you can always fall back on in case you F up. Thank Koush and all the testers.
* alternative method: Open Rom Manager and navigate to the backup/restore section, and just follow the prompts. I like to rename my backups (date/build/etc). **
HOW TO RESTORE A BACKUP
Follow the steps from above, but select "Restore" instead. They will be sorted by date YYYY-MM-DD HH:MM:SS.
** alternative method: Open Rom Manager and navigate to the backup/restore section, and just follow the prompts. **
HOW TO FLASH A CUSTOM ROM
We have some amazing developers for the Vibrant. You REALLY need to try the custom ROMs for our phone that already exist. Here are two of the more popular ones:
** Please note there are always new ROMs coming out, these are just the ones I currently love. Check the Development section often (and don't ask questions there) **
The ROMs listed are only the Eclair versions. There are now Froyo builds available and they are all very tasty (I've tried 3, and they were all very solid builds that could be a daily driver, no FC's). Check the Development section or the site of your favorite developer (likely Eugene or Team Whiskey).
Bionix - #teamwhiskey has made this baby stable and fast. I personally OC with JACs kernel using SetCPU (200/1200/conservative/no profiles/no set on boot). I can say this made my phone so, so much better. Always make a backup so you can revert. If you flash a oc/uv kernel please note a nandroid backup does not restore the stock kernel. I have links in this thread for it, if needed.
Bionix Fusion - sombionix & #teamwhiskey have upped themselves from Bionix with this puppy in my opinion. They removed the TouchWiz and substitued LauncherPro in it's place. I am running this now, and will not switch from it. I think if you can live without TW, you will agree.
Frankin-Twiz Final - by Eugene373. This is another amazing developer/ROM. You are going to have to read about or flash both to decide which you prefer. Eugene seems to maintain multiple ROMs so it might be best to search the Development section for your preferred flavor. Same sentiments here that I said for Bionix.
STEPS TO FLASH A CUSTOM ROM:
- READ THE FIRST POST FROM THE DEVELOPER AND/OR THE CHANGELOG/INSTRUCTIONS
- Download the ROM to your PC (or directly to your phone if you have a good connection). I have done both, straight to the phone is nice because you can just move the file to your internal root /scdard and then flash it (quick method).. I also like downloading to my pc and check the MD5 before mounting my phone and moving it to /sdcard (safe method). Your choice.
** Rom Manager has a new Web Connect where from your PC you can download the file direct to Rom Manager if the developer supports it **
- If you use Rom Manager/Clockwork Recovery there are two methods to actually flash the ROM, again, your choice here:
Method 1: Use Rom Manager (make sure you have flashed clockwork recovery before proceeding, this is not needed if you already have CWR). Select to "Install ROM from SD Card" and the select the .zip file that is the new ROM which should be on your internal root sdcard/. You will then get a prompt where you can check to wipe data (not needed in my opinion as most ROMs do this automatically) and a check box to create a backup (always do this). One reason I like Method 1 best is because it makes renaming your backups easy (I typically rename so I know what the backup is). The system will then reboot into clockwork recovery, start the backup and when that is done automatically flash the ROM. All you need to do is reboot once it is done and BAM, new fast/stable ROM.
Method 2: (The manual way) Once the rom is at the root of sdcard/ use Rom Manager to reboot into clockwork recovery. Create a nandroid backup and then select to install a .zip.. select the rom, let it run its course and reboot.
DID YOU F'UP AND NEED TO GET BACK TO STOCK?
Well, thanks to XDA User justanothercrowd we have a Nandroid Backup to get you back to how the Vibrant shipped (and rooted of course). Hopefully you don't need it, but thank him after reading his post just in case you do!
** Please note this was prior to JI6. If you want stock JI6 search the development section or look in their sticky **
You should also check this thread by almyz125!
DID YOU F'UP AND THINK YOUR PHONE IS BRICKED? MAKE A JIG
jigga-what?
If you can get into download mode you are not bricked. If you are NOT able to get into download mode (but you can see something other than a black screen) that THIS THREAD WILL SAVE YOU PHONE!!!
HOW TO UN-ROOT *ie, sending your phone in for warranty work
The following code can be keyed in Terminal Emulator (could also be done in ADB or deleting the files using Root Explorer). If you do use Terminal, change the keyboard to the stock Android KB prior to opening Terminal. Apparently the backspace on swype does not work in Terminal. Each line should be entered separately. bahnburner gave the instructions in this thread, which you should review first.
su
rm -r /system/app/Superuser.apk
rm -r /system/xbin/busybox
rm -r /system/bin/su
reboot
Click to expand...
Click to collapse
* Alternate Method *
TGA_Gunnman in this thread created a one click root/unroot program. Thank him for his effort.
HOW TO CHECK A MD5SUM
Download HashTab. Install. Download your file. Right click on it. Click on Properties and then go to your new "file hashes" tab. Verify this matches the MD5Sum of the file you downloaded before installing/flashing.
THINGS TO DO WITH ROOT
FLASH A NEW MODEM
New modems can increase signal and data speeds. Here is an incredible list of each. Pay notice to the version of android you are running. CLICK HERE FOR MODEMS
TRY A CUSTOM BOOTUP ANIMATION
tonicacid posted both a great guide for making animations and some killer ones ready to be flashed. Before you read his post, a couple of things to know when changing bootup animations:
1 - almost all custom roms are going to allow this due to the kernel they use, but you may want to double check first.
2 - there are different ways of installing different bootups... some need to be flashed in CWR (like roms and themes) and some you simply take the file and move it to the appropriate folder, typically system/media and replace the bootanimation.zip file in that folder.
3 - follow the advice of the person posting the bootanimation.
Here is a link to tonicacid's thread. I personally am using the Bullet one on Axura 2.1 and I love it.
ALTERNATE BOOTUPS
Now, these may be a bit "too much" for some and they may prefer others like the ones in this thread.
There are plenty of bootups... try the theme section, development section and the Android Theme section.
TRY A NEW KERNEL!
** These are often updated, check the Development Section **
** Please verify what version of android these kernels are for, this list is not updated often **
PLEASE NOTE THAT IF GOING TO STOCK, YOU NEED TO FLASH THE STOCK KERNEL. IF YOU ARE ON FROYO, THE ECLAIR OC KERNELS WILL NOT WORK (CURRENTLY ANYWAY).
JAC has an amazing kernel, and it's super easy to install. Visit his thread. Download it, move it to /sdcard root, go to (in my case) clockwork recovery and install it. Be sure and follow his instructions in case something changes. There are many ROMs to choose from, this is just ONE example of a good kernel that I used when I was on an Eclair build.
Reboot and download SetCPU (there are alternatives, but this is what I know and trust). You can then overclock the processor to 1.2GHz. I am noticing great battery life and my linpack scores (I'm not a fan of benchmarks) jumped from low 8's to 9.6. Quadrant also jumped up to around 950 if I recall correctly. I do not use any lag fixes or anything, just updated the kernel.
If you want to go back to the stock kernel (please note this may not be the current stock kernel - depends on what build you are on), it can be found here. As always, perform a nandroid backup just in case. Nobody on here is responsible for your actions.
Also, I should point out that JAC was nice enough to provide a script, so you can overclock without using an app like SetCPU. Your choice. Be sure and thank him for his hard work. It really is a great kernel.
Eugene373 I believe currently has the best 2.2 kernel, CLICK HERE FOR SUPER I/O KERNEL
SetCPU ($2):
WANT THE STOCK ANDROID LAUNCHER FROM THE NEXUS ONE?
Grab the Launcher2.apk file attached below. Move it to system/app and press home. There, stock android. I have to say the 3d launcher is very nice. I still prefer LauncherPro (my fav).
View attachment launcher2.apk MD5 8804735190DEC0F2F42DEDF0DAB8A261
TRY THE CAPTIVATE CAMERA, ON YOUR VIBRANT ** thanks to chaoscentral for creating the flashable .zip **
Thanks to mikey98277 and his post here you can easily flash the Captivate Camera on your Vibrant. I have played with both and it's a matter of preference, but I think most agree the Captivate is a easier/cooler UI. ALSO, it sorts pictures in the correct order!!
REPLACE THE TW CALENDAR WITH STOCK ANDROID CALENDAR
I was not a fan of the TW calendar. I downloaded CM 5.0.8 and took the calendar from his rom and replaced it. Here is a great guide. Note, I use an app called quick boot for fast reboots! The Calendar and CalendarProvider .apk's are attached below.
* After using it, I noticed there is a white bar across the top of the month. I still prefer the stock calendar, but there is your warning. If anyone finds a fix, please let me know! *
View attachment Calendar.apk MD5 4EA76AAFD2911388A9E8DB12490A055B
View attachment CalendarProvider.apk MD5 A750B4D4964581D830F45A08B1A4CE34
USE THE GALAXY I9000 BOOTUP / SHUTDOWN ANIMATIONS & SOUND
** This was used when I had Eclair, not certain this will work for newer builds? Check the thread **
rko did an awesome job with these flashable bootup/shutdown animations (place them on the /sdcard (internal memory) NOT sdcard/sd (external). Be sure and thank him for his work!
CONTROL YOUR STARTUP (PLUS MORE)
I only know and use Autostarts (found here).
Download it. Install it. GO TO MENU > SETTINGS > APPLICATIONS > (can't recall the next menu name at the moment) AND ENABLE USB DEBUGGING (it will not work otherwise). Open Autostarts.
Go to the options and hide all of the system apps (no point in messing with those). After that, simply control what market/3rd party apps should be running given the task identified by Startup. You will be surprised what apps appear, for no good reason. Obviously if you are sending a text message you do not want to disable an app like handcent, so use common sense here. Any questions or issues, I would suggest emailing the developer or posting a question in the App section (perhaps there is already a designated Startup thread to ask this question, hint hint).
Autostarts (Approx $1):
RESTORE SETTINGS AFTER WIPING YOUR PHONE *If changing from one ROM to another, be courteous, and wipe.
XDA user SykesAT reminded me that Titanium Backup is a great app for restoring after wiping your system. I do not use it, so I asked him to do a small write up. He obliged, and here it is:
Backup Your Apps and System setting with Titanium Backup
It can backup/restore:
* All the applications you have installed, including protected ones,
* All the data and settings of these applications,
* Most (or all) of your phone's settings and data. (incl. SMS, bookmarks, call log, calendar, launcher, WiFi, etc)
* Market links when restoring apps.
* NOTE: It will not backup the system applications from your ROM. Only their settings will be backed up.
Titanium Backup is available from the market (free version only) or you can DL from the dev's site. There is a premium (donate) version with more features. Please see the Dev's site for more details, instructions and FAQs. Here is a link to his site!
Click to expand...
Click to collapse
Titanium Backup:
** chichu_9 had a GREAT post with more information/instructions/guides from TB's site, check his post here **
Update, I broke down and got the paid version. It is amazing. It runs MUCH faster and restoring your apps + data could not be simpler. Most Vibrant ROMs will wipe your data (ie apps), so this is a GREAT way to restore your phone back quickly.
Ti Backup (Free):
Ti Backup (Paid Approx $5.81 currently, it's worth it IMO):
DELETE THE BLOAT!
Download Root Explorer (i'm not associated with) and go to System/App to remove a lot of the bloatware that came on the phone. I strongly encourage researching what can & can NOT be removed. ALWAYS make a backup. Alternatively, you can use Titanium Backup (free) to uninstall the apps (I only know Root Explorer, it never fails me). Remember, I am not responsible. It will be some time before we have a custom ROM that removes this crap for us.
Here is a list of apps I recently used to remove a lot of bloat (I kept AllShare and ThinkOffice). After you backup, delete, go to settings > Applications > Menu > Filter > Show All and delete the leftovers from the apps, little traces left behind.
In that thread I also saw you can delete data_tmo/games (73MB) if you do not play/deleted The Sims.
Here is a list from the JFD builds (most of these are seen in future versions):
First off all the Standard Apps:
AccountAndSync.apk/odex -> The app in the drawer, not the settings.
AddToHome.apk/odex
AudioPostcard.apk/odex
Avatar.apk/odex -> The app that launches Avatar in the video player.
BuddiesNow.apk/odex
Dlna.apk/odex [Allshare]
FlashPlugin.apk/odex
GoGo.apk/odex
Infoalarm.apk/odex [Daily Briefing]
KindleStub.apk/odex
Layer-samsung.apk/odex
MediaHub.apk/odex
Memo.apk/odex
Mini Diary.apk/odex
MobiTV.apk/odex
MyAccountStub_4-5-10.apk/odex
Myfiles.apk/odex
Sims3_Samsung_Embed_Launcher.apk/odex
slackerradio.apk/odex
Swype-Tips.apk/odex
Telenav.apk/odex
thinkdroid.apk/odex [ThinkFree Office]
vvm-signed.apk/odex -> T-Mobile Visual Voicemail [can be re-downloaded from the market. for some reason that version is the preferred one.]
VoiceRecorder.apk/odex
VoceDialer.apk/odex
Writeandgo.apk/odex
TouchwizWidgets:
Day.apk/odex
DualClock.apk/odex
SamsungWidget_Calenderclock.apk/odex
SamsungWidget_Feedandupdate.apk/odex
SamsungWidget_stockclock.apk/odex
SamsungWidget_Weatherclock.apk/odex
Click to expand...
Click to collapse
** If you are having issues with Root Explorer not being able to delete files (not mounting), the please see my post to see if this helps. If it does not, please let me know in the thread. **
TAKE SCREEN SHOTS!
If you have root, the easiest way is to download shootme or drocap2 from the market. You can also use the Android SDK, but I'm going to keep is basic here. Once you have your pic, upload it for all of the community to see!
Shootme:
DISABLE ADS WITHIN APPS! ** On Froyo it seems on websites it creates a URL with the android logo, odd but the ad is blocked nonetheless **
Download AdFree from the market... check for updates and voila, most, if not all apps should be ad-free. Ads help the developers. If you care, rather than block them, try clicking them to support.
AdFree:
HOW TO TETHER ** most custom ROMs and FROYO likely already include this **
There are apps like Barnacle and Wireless Tether, but I would now recommend the Tether app that came with the Galaxy (that was removed by a lot of the carriers). Ibingham was kind enough to post the .apk (JI6 Build click here) (JFD Build click here) and I can tell you it works perfectly. Please note the app is not in the app drawer (his first post has everything you need to know).
Thanks to chui101 for notifying me of the updated version for JI6 builds.
STOP THE BOOTUP / SHUTDOWN AUDIO NOTIFICATIONS!
This thread has it covered: http://forum.xda-developers.com/showthread.php?t=731059
I deleted these two files using Root Explorer (referenced below) and can attest it works perfectly.
The i9000 Galaxy bootup/shutdown animation/sounds were listed above if you want a new look.
Thanks to XDA Member PhilSlater I know that the File locations are:
Bootup: system/etc/PowerOn.wav
Shutdown: system/media/audio/ui/Shutdown_128.ogg
Click to expand...
Click to collapse
So Zaduma does not feel insulted here is an alternate method. You can see his post here.

Continued from post #1
VIBRANT TOPICS
ARE YOU HARDWARE LOCKED? ** Please note this is for JI6, if you are running froyo do not do this **
untermensch has a fix for those who are HWL'd that seems VERY effective. I always heard some who updated from JFD to JI6 had the HWL fixed automatically, but that was not the case for everyone. It appears those who updated OTA got the fix, but most who did ODIN or Kies did NOT get the HWL issue fixed.
Please see his excellent thread by clicking here. Hope this helps.
If you are using froyo, I imagine you could revert back to JI6 and flash this to fix the HWL.
HOW TO USE ODIN
I have the steps listed below (from when JI6 was leaked). For those who prefer a video, this video seems to do a good job of showing it.
TIPS FOR BATTERY LIFE
I have not tried this, but BruceElliot had a great post on his suggestions to improve battery life. You can read it here. I will try and add more as you guys report them to me.
GPS FIX THAT WORKED WONDERS FOR ME!
I have never had an issue with GPS until I flashed ODIN JI6. I could be outside 45 minutes and never get a lock... stock JI6, Eugene's or sombionix's ROMs.. nada. I was PM'd by kdf2833 about a GPS fix for the JI6 (no clue if it works for JFD, I would assume so). He told me to go read THIS POST from digatltoddy. Below is the post if you do not want to leave the thread:
You'll need to get into LBSTestMode by entering *#3214789650# from the dialer. Press Delete GPS Data, this will get rid of the bad GPS information that is probably still stored in your phone. Go to Application Settings and set the Start Mode to 'Cold Start'. Reboot your phone and go outside, run an app like GPS Test and let it lock onto as many birds as it can, once you get a good number (at least 5), go back into your LBSTestMode --> Application Settings and set the Start Mode back to 'Hot Start', reboot and all should be merry.
I had major issues w/ my GPS and was able to put this together with the help of various posts and a deeper understanding of how GPS on these phones actually works. Hope this helps!
Also, it's probably best to run the GPS Test application while you are driving around, let it lock onto as many birds as it can (I'd say let it run for a few minutes, I was able to get 9 the first time) before setting it back to 'Hot Start'. This way it will keep these birds in the list and allow you for a faster lock afterwards.
Click to expand...
Click to collapse
** If this works for you too, and boy did it for me, please thank digitaltoddy and let me know in this thread - good or bad so I know **
EASY WAY TO GET THE JI6 UPDATE ** Huge thanks to VICosPhi, youneek, samfirmware.com, rhcp0112345,Viralblack and the3dman **
I went back to the stock kernel from JACs oc/uv kernel using this zip file (flash it in in clockwork recovery). I then downloaded this .zip from VICosPhi. and followed the following steps (given by youneek):
** please note that I was on the stock ROM (with alot of mods). If you are running a custom ROM, you may need to go back to stock (I do not know, n/a to me), which would wipe your data.... if you are stock (JFD) however, you will retain all of your settings/data when you update to JI6.
Those who want to go back to stock the file is included in the zip and youneek laid out all the steps in his thread. Below are the steps for people who are stock already (JFD) **
Step 1.) Open Odin.exe and plug a usb cable to your computer that will connect to your phone (do not plug it in to the phone yet, just the computer)
Step 2.) *Added this: Power off your phone before trying to get into download mode, and then....*
Hold down both volume buttons at the same time and while holding them down plug the usb into your phone. You should see a COM message show up in Odin.
Step 3.) Leave all check boxes the way they are. Do NOT check the repartition box.
Step 4.) Click the PIT button and select the 512.pit file
Step 5.) Click the PDA button and select T959UVJI6.tar and then click Start
Click to expand...
Click to collapse
Your phone will reboot. It will take about 10 minutes at the Galaxy screen, this is normal.
VICosPhi:
[ People with hardware locked vibrants, make sure you have the drivers installed for vibrant on your PC and then connect your phone to pc with USB debugging turned on and open adb and type "adb reboot download"]
Click to expand...
Click to collapse
** I lost root. I followed these steps again. I have clockwork recovery which you have to keep the update.zip in /sdcard.... well, to root, the file must be named update.zip and in /sdcard, so I renamed the CWR one "cwrupdate.zip"... when my root and reboot was done I went back and renamed the cwrupdate.zip back to update.zip (afterr I deleted the update.zip file that was used to root). This all may not be necessary, but it worked for me.
I rebooted in clockwork recovery (remember to reinstall packages for this update.zip at the stock recovery to get to CWR) and made a nandroid of stock JI6 so I have this fresh root to come back to. ALWAYS MAKE A NANDROID BACKUP!
QUICKLY REBOOT YOUR PHONE
Sometimes you need to reboot your phone. kizer & Gad13 informed me that you can press and hold the power button for 8-10 seconds and it will reboot. I also use an app called Quick Boot that works very well. Quick Boot does require root access. I have a shortcut on my LauncherPro dock, one press and I can reboot.
BUTTONS - Tap vs. Long Press (LP) Taken from www.androidcentral.com:
Home: Returns to the main home screen. If at the home screen, another tap gives a preview of all home screens.
(LP) = See your most recently used apps (GREAT for multitasking). On JI6 (update from Oct 2010) you also can see the Task Manager.
Back: Takes you back a level in an app, or back a page in a browser, etc.
(LP) = In your browser, quickly access bookmarks, history and most-visited sites. Thanks, Snapdragon0503! (EDIT: odd, doesn't seem to work for me now)
Menu: Tap this for additional options in an application, or from the home screens.
(LP) = Make the keyboard appear.
Search: Brings up the search function. Could be search within an app, Google search, or universal search of contacts, bookmarks, apps, etc. that are in the phone.
(LP) = Launches voice search.
WANT A NEW LOOK? CHANGE YOUR FONT!
In settings, go to sound and display. Change the "Font Style" is like 8th from the bottom. There are a few freebies, and about 50 for a dollar in the market. If you want to see more available, click on "Get Fonts Online." This will direct you to the Market.
I changed my system to helvetica, and I was amazed at the level it changed the phone.
EDIT: I used to have a thread linked here with 100's of free fonts, but some broke the rules and posted paid fonts so the thread was closed. If anyone starts the initiative to post more free ones, please let me know so I can add a link, thanks!
CHANGE THE DOCK BUTTONS ON TOUCHWIZ!
Open the app drawer, menu, edit, change to customizable. With the app drawer open now, press menu and edit again. You can now replace the two app docks in the middle (dialer and app drawer can't be replaced).
DELETE APPS FROM THE LAUNCHER OF TOUCHWIZ
Open the launcher, menu > view type, change to customizable. Now press Menu again and select Edit. All of the non-system apps will have a red subtraction logo. Thanks to XDA user erikrios and his post for this gem!
QUICKLY ADJUST YOUR BRIGHTNESS
Move your finger left to right across the notification bar. You probably need to cut off auto-brightness though. thanks to soklean (neat!)
NEED TO COPY AND PASTE?
If at a site, and you need to copy some text... click Menu > Select Text > Drag your finger over the text you need to copy. When you release your finger, the selected text is copied to your clipboard. Long press and paste when ready. I agree this is not perfect, but some of us may not even know you could do it. Froyo is coming soon, and with it the ability to easily copy/paste within gmail.
HOW TO CONTROL + F USING THE ANDROID BROWSER
Android makes this very easy when using their browser as well. Simply press Menu when in the browser, go to More, then select "Find on Page." You can then enter the keyword you are looking for and use the directional arrows (to the left of the word) to move from one entry to the next.
CHANGE THE HAPTIC VIBRATION INTENSITY
Love this feature. I often find haptic feedback is too much. To adjust the intensity, from the home screen: Menu > Settings > Sound and Display > Vibration Intensity. As you slide the bar it gives you an idea of the intensity.
TAP CONTACT IMAGE FOR MORE OPTIONS
XDA user jkang29 reminded me of another thing I took for granted. When you are in Contacts, click on the image of the contact for MANY options on how to contact/share with that particular contact. Thanks jkang29!
WANT TO DISABLE SD CARD NOTIFICATIONS?
To cut off the sound, from the home screen: Menu > Settings > Sound and Display > SD Card Notifications. You can uncheck this and never hear that sound again.
CAMERA / VIDEO SECTION
WANT TO ADD THE FRONT FACING CAMERA TO YOUR VIBRANT?
Thanks to siirial and Eugene's ROM you can actually have a working FFC on the Vibrant. It takes a little modification, and you will need to be running a custom ROM from Eugene (Root Needed), but if you want a FFC, this is an awesome mod. I have not done this myself, but please see his thread for everything you need to know (how to get the camera, how to mod the phone, and you can find a link to Eugene's rom).
* If someone can create a video for this mod, please let me know so I can post it for everyone. * Thanks to MTC44 for the suggestion.
PHOTOS IN THE DARK? WANT A PANORAMIC?
You can put the Camera in Night Mode and it will take amazingly good photos in a dark situation. I tried this for the first time at a concert recently. I was amazed. Pull out the tab on the left of the camera screen, go to settings and change Scene Mode to Night. Do some test shots to compare for yourself!
Also, I tried out Panoramic shots for the first time in Alaska. I was amazed at how simple/easy this was. Just like before, just go the settings and change the mode. Then just pan left to right. You can press the camera button again to stop the panoramic... I believe it can take up to 8 shots.
LOCK THE SCREEN WHILE VIEWING VIDEOS OR USING THE CAMERA
XDA user timekillerj just made a thread pointing out how to do this. It was new to me, and a nice feature. Simple press the power button and your screen is locked - helpful so you do not skip a scene by accident. You can see his thread here.
HOW DO YOU ZOOM IN?
XDA user antonio91282 pointed out that you can zoom in by pressing the volume rocker while using the camera. It goes from 1-4x.
DIFFERENCES BETWEEN RECODING VIDEO TO SD VS. INTERNAL MEMORY ** No noticable difference **
XDA user wphend00 asked if there were differences between recording video to the SD vs. Internal memory. Here is my post with links to the videos so you can see for yourself. Here is a link to the entire thread so you can see discussion about it, if any.
APP TOPICS
DOWNLOAD NOT SHOWING UP, MAKING YOU REBOOT?
I did not notice this on Eclair, but with the froyo builds most of the time my downloads (especially pictures) do not show in the Gallery unless I do a reboot. IF this was a problem on Eclair I just went to SD Card & Phone Storage an unmounted and mounted my internal memory. Froyo has taken this function away apparently.
I found that this app ScanMedia works like a charm (no permission needed)
COMPARISONS OF THE HOME REPLACEMENT APPS ** AS OF OCT 2010 **
I tried to write a synopsis of the apps that can replace TouchWiz. Please see this thread here and let me know if I missed anything. I strongly encourage new users to try these apps. I prefer LauncherPro - it just seems snappy.
INSTALL THE 2.2 MARKET ON YOUR 2.1 DEVICE ** I had hiccups, just flash a froyo ROM in my opinion **
Paul (a genius for rooting android devices) made a tweet a couple of weeks ago about how to install the 2.2 market on 2.1 devices. You can see his thread here.
XDA user JWhipple made a post with the .apk file and it's really been catching on. You can find his post and the file to download here.
Do not delete your existing market (vending.apk from system/apps) or move it. Just simply download the .apk file from the linked thread, and then open it up with a file manager. It may ask you to install or upgrade, click that, and then accept the prompt about a system app. Voi'la, you have one of the better features of 2.2 Froyo on your phone now.
** Please note this is just the updated market, you will not be able to install Flash on our Vibrants till we have Froyo OS **
Huge thanks to Paul, Liam Haynes and JWhipple. I have done this and everything seems to be working perfectly.
WANT SWYPE WITH VOICE INPUT? ** This may be irrelevant with JI6 rolling out OTA now **
Jr33 made a thread with a version of swype that has the voice input button. It works very well. Just download and install with clockwork recovery. You can find it here. If after installing it you would like to theme it, head over to this thread started by hoey2011. I have done both of these mods, and love it.
WANT THE NFL APP FROM VERIZON?
Mr_Creeper_98 made a post for the updated NFL app that Tnpapadakos posted. This is a must have app if you like the NFL. You can find the post here.
WHERE ARE APPS LOCATED?
System Apps:
system/app
Click to expand...
Click to collapse
Market Apps:
data/app
Click to expand...
Click to collapse
Market Apps (Private):
data/app-private
Click to expand...
Click to collapse
Downloaded Apps (using browser):
sdcard/download
Click to expand...
Click to collapse
* If you download an app using the browser, you can use Root Explorer to move the app to data/app so the apps are stored on the 1.9GB partition the system uses. Once moved you can click on it to install it.
TRY A HOME REPLACEMENT (ADW or LauncherPro) ** See my guide above for some Home Replacement options **
Go to the market and download either - both are free. Gravis86 started a good thread debating which is better, located here.
ADW:
LP:
This my LP setup on my Vibrant (OLD, much cooler looking now, ha). Notice the docks (these are also scrollable & there are 5 per each desktop screen you have). The Live Wallpaper is Aquarium.
XDA user afive720 had a nice post on how to revert back to TouchWiz (without uninstalling). You can read the thread here for more information.
WHAT WEATHER APP IS THAT?
It is Beautiful Widgets, found here.
BW is approximately $1.92:
WANT TO USE ALLSHARE: PC > PHONE AND VICE/VERSA?
I found this thread to be extremely helpful. I ended up using Windows Media Player and it was too easy. Great app.
XDA User BritCrit has also given some really good information in this thread you may also want to review.
USE AWESOME DROP TO MOVE FILES IF NO CABLES
If you are ever in a bind, or just being lazy you can use this app to move files from a PC to your phone. No hassle, no account setup and it is free. Just go to this site: http://labs.dashwire.com/drop and then enter the 4 digit code when you open the app on your phone. Drag whatever files to the browser on your PC, and voila, it will instantly start showing up on your phone.
REDUCE A PICTURES SIZE BEFORE SHARING IT?
Paul O'Brien tweeted about an app, Image Shrink Lite, that lets you adjust the size and then select the method you want to share (twitter, messenger, gmail, etc). I mention this only because a lot of people get frustrated when they take a pic and try and send it out, but gmail hangs on it (and it eventually ends up a draft email) because it is too large to send timely. Re-size the pics before you email them and you will not have this Fail.
Image Shrink Lite:
METAMORPH - Theme Your Phone!
junkdruggler has a great thread on everything metamorph. Please check it out here and thank him! Metamorph is great for theming your phone, but it can break your market requiring you to login again. I prefer to theme with .zip files flashed in recovery.
MetaMorph Donate ($1):
Free:
** Use Metamorph to theme Swype or your Notification Bar ** (these are old links, there may be better/cooler ones now, search)
Themed Swype - Huge props to hoey2011
Themed Notification Bar (Evo) - Huge props to bahnburner
*ALTERNATIVELY* YOU COULD FLASH THIS .ZIP AND NOT USE METAMORPH (This is what I am currently running, it is spectacular!!).
CONTACTS / DIALER TOPICS
HOW TO ADD UNWANTED CALLS TO REJECT
I was recently being spammed. About 20 calls a day (ANNOYING). After you get an unwanted call, go to the Call Log, long press on the number and then add it to the Reject List. Next time the number calls you will just get a pop-up letting you know.
EDIT YOUR CONTACTS (BIG IMPROVEMENT IMHO)
Please read my guide located here. It was moved to save space. This really cleans up the phone, so I encourage giving it a try!
FIND YOUR CONTACTS FASTER!
When you load Contacts, you will notice the far right has the alphabet running top to bottom. Good news, by simply pressing on the letter you will automatically jump down, instantly.
SMART DIALER!
Pull up your dialer and just start typing the number (or letters will work too, thanks sl0play) out. It filters down your contacts as you type each new digit/letter. Likely, after the area code and first 1 or 2 digits after should be enough. There will be a drop down on the right and a number above it (the # of possible contacts based off what you input). Just press the contact, and the press CALL, genius.
SLIDE CONTACT PIC TO TEXT/CALL
denny_1986 mentioned in this post, that by sliding the contact picture to the left you are sent to the messenger app (with the "to" field completed). If you slide the contact pic to the right, you call the default phone number. Works in both Contacts and Messenger.
KEYBOARD TOPICS
TRY A NEW KEYBOARD!
To switch... simply long press anywhere that you would normally input text (a text message or the search widget). "input method" will pop up, click on this. Now choose the KB you want to try out. If one is not showing up, go to Menu > Settings > Locale and Text and make sure it’s there & checked.
NEED A TRACKBALL? ** Other KB's can/may do this too, you can search this thread for how, I prefer Swype **
In swype, move from the "swype tips" button to the "sym" key. Voila, directional buttons appear + other goodies (see pic).
MISC. GUIDES
HOW TO RECONDITION YOUR BATTERY
If your battery seems to drain fast, or if you are changing roms, you might want to try the following to help your battery. Master posted the following instructions (this assumes you have root and clockwork recovery):
1.) Drain your battery to the point it shuts off on it's own..
2.) Plug it in & let it charge over night (While it is still off)
3.) Launch into ClockWork Recovery by holding the "VOL UP", "VOL DOWN", & "Power" release those buttons after you see the second Vibrant screen.
4.) Press "reinstall packages" (It should take you to the Clockwork Mod Recovery screen, If it didn't then press "reinstall packages' again)
5.) Go to "advanced"
6.) Press "Wipe Battery Stats"
7.) Reboot
Click to expand...
Click to collapse
** I drain my battery to as low as it will go, but not all the way. I also charge it for only about an extra hour max, once it's fully charged. **
HOW TO MOUNT PHONE TO PC
XDA user DaMaDo reminded me Android does not auto-mount like some other phones on the market. When most of us connect the phone, the USB drivers are automatic (use the cable that came with your phone!). If not, there is a guide below to assist. For now, let's assume all is well on the first connection of the Vibrant to the PC. When you connect you will likely get a popup on the PC about installing drivers, great.
Okay, go to the phone's notification bar and pull it down. You will see USB Connected. Click on this, & then click on "Mount."
Shortly after, your computer should pop up automatically TWO devices, the "/SDCARD" (Internal Memory) and "SDCARD/SD" (SD Card). If not, go to My Computer and find the drives you just mounted to the PC.
NEPHRON'S GUIDE FOR ADB, etc (taken from the G1 forums)
This guide helped me a ton. I realize some things may be different, but I could not think of a better starting point. Please read this thread. You should attempt ADB, it's very nice to have.
CONVERT VIDEO FILES ON YOUR PC FOR YOUR PHONE
XDA user TGA_Gunnman did an excellent job putting a thread together for how to convert videos using HandBrake (get it here) and then moving them to your phone. Be sure and thank him if his how to helped you!
HOW TO PROPERLY INSTALL A NEW SD CARD
XDA user techspy posted this question and I had recently done it so I responded. Like always, I'm certain there are people on here who know how to do this better/easier, but this works and is nothing difficult. Here is my post with instructions, and here is the thread for discussion.
HOW TO HIDE FOLDERS
achild made a great post with the instructions. Thank him for his effort on this post!
MISC. QUESTIONS
MY PHONE NUMBER DOES NOT SHOW UNDER SETTINGS?
It has happened to me on the G1, and I recently saw a Vibrant user post this. smerff has an excellent post with what you need to do!
WHAT ARE THOSE FUNKY BARCODES?
These are QR Codes. Download Barcode Scanner from the market. Scan any of these codes I linked. You will be sent to the app in the market. Download, enjoy.
NOTICE LAG? ** I do not use lag fixes so this may be old, please search the development section before creating a thread **
I do not encourage this, but some will want to play with it. There is a great thread on tweaks that can be done to speed up the Galaxy.
I personally think custom ROMs and oc/uv kernels knock out almost any of this issue. If you are stock/non-rooted.. please try a root/custom ROM setup before you give up on the Vibrant. Our developers are amazing.
DOUBLE NOTIFICATIONS?
If you are using a 3rd party app, you may be getting double notifications. For example, I use Handcent for texting (you should try it). First thing you need to do is open the stock Messenger app, go menu > Settings and disable notifications. This is basic, but sometimes it's easy to overlook.
SHOULD I USE A TASK KILLER?
Absolutely not. You have the best OS and one of the best spec'd phones ever. You would be doing more harm than good. If you do have one, uninstall, reboot and let me know what you think! If you have a bad app that is causing you issues, uninstall it, rather than installing a TK.
In addition, even Google at Google I/O 2010 addressed app developers and asked them to no longer include "quit" or "close" as options within their apps. I think Andronica (another great android site) summed it up well with their article, found here.
XDA user iunlock created a thread with some good debate based off this sticky. You can read all the thoughts by clicking here. In short, the overwhelming majority agreed and some have commented on seeing an increase in performance after deleting their task killers.
HOW TO DO A FACTORY RESET!
Rarely should you need to do this (I've never done one), but if you want to, simply press menu and go to settings. Scroll down to Privacy. In there is the option to perform a Factory Reset.
NEED HELP INSTALLING THE DRIVERS ON YOUR PC?
TGAGunnMan started a great thread with links for the drivers. You can view it here.
courtmagician also has a good thread discussing issues with USB Debugging as well. I would suggest reading this thread also.
THREE (3) LIGHTS/SENSORS - SURE THERE IS NO NOTIFICATION LED?
Yeap. I asked myself when I noticed there were 3 items. Two are used for the proximity sensor, the other is the light sensor.
Big props to XDA user gravis86 for answering my query so fast, see his post here.

CHANGE-LOG
01.13.11
- Removed link to 100s of free fonts since the thread was deleted (thank you to theotherguy)
01.05.11
- Added cvibe88's videos to the top of the sticky
12.12.10
- Link to Eugene's Super IO kernel
- Link to all of the modems for the Vibrant (thanks scrizz)
12.08.10
- Change the bootup animation
12.05.10
- Make a JIG - save your "bricked" phone
12.03.10
- Deleted how to flash a radio as it was not applicable to our phone (we have a MUCH easier process)
- Clarificatoin on a few things - HWL phone/rooting
- I'll try and add more during my work day.
11.29.10
- Link added to the Intro for noob friendly guide (Includes videos)
11.16.100
- Added the app ScanMedia to App Topics (useful when pics/ringtones/etc do not show after download)
- Deleted some stuff for space needed
- Added larger headings for the sections
11.13.100
- Added a fix for Hardware Locked phones - let us know if this does/does not work.
- Added at the top of the thread how to go from Froyo BACK to Eclair if wanted.
- Removed the old HWL fix I had... it actually was the same thing, but I like my new wording better, ha.
- Deleted the "how to enter safe mode" recommendation given to me
- Moved how to send calls to the Phone/Dialer section.
11.12.10
- Added farrisizdamans thread for those who MISTAKENLY (dont do it!) used the Partition feature in Rom Manager.
- More housekeeping. If you guys see things that need to be updated, PLEASE let me know. This has become more of a task with Froyo rolling out and multiple kernels.
11.11.10
- I went and tried to update/clarify a LOT of the material.
- Added how to send calls to a Reject List (Spam/telemarketers) - Vibrant Topics
- Moved Vibrant Topics to the top of post 2.
- As always, let me know how to improve and what to add.
11.10.10
- Added a video of how to use ODIN (not my video, random find on youtube). Its in Vibrant Topics, post 2.
- Probably going to update to 2.2 tonight... may try and post that later if people are interested.
11.1.10
- BruceElliots post on improving battery life (Vibrant Topics)
- chaoscentral gets credit for the Captivate camera previosly posted (my bust)
10.27.10
- How to enter Safe Mode (Vibrant Topics) - thank you so much patriot1973 for the PM/thread.
10.21.10
- JI6 GPS Fix. I used to pick on people complaining about GPS till I did this. Blew me away. (Vibrant Topics)
- Moved how to install JI6 to Vibrant Topics
- Added steps to take if Root Explorer is not able to mount/delete system files (Delete the Bloat post)
- Added more information on how to use Titanium Backup
10.14.10
- How to flash a custom ROM (Root Topics)
- A fix for hardware locked Vibrants (Vibrant Topics - post 2) Thanks Chui101 and untermensch)
10.13.10
- Comparisons of the Home Replacements (App Topics)
10.12.10
- Updated instructions for Rom Manager
- Updated a lot of posts for JI6 (please PM me if you catch something that needs updating)
- chio101 notified me of the JI6 Mobile AP (Wireless Tethering)
- I flashed Bionix 1.7 tonight with JACs oc kernel. I'll post thoughts later today. I encourage you to try it also!
10.11.10
- How to install the 2.2 Froyo Market on our 2.1 Device (root not needed so it's under App Topics)
10.08.10
- How to flash JI6 (be sure and go back to stock kernel if needed - this is also in the sticky - ctrl+f for "kernel")
- How to recondition your battery (Misc Guides - post 2)
- Task Manager by LP'ing HOME - thanks kuhan
10.08.10
- Added how to install the front facing camera (FFC) thanks to siirial (Camera section - post 2)
- Added panoramic shots to the camera section also. Will try and post an example from Alaska later.
- Updated the OTA/Root topic. It appears many did not lose root with the OTA update. Awesome to hear.
10.07.10
- Added JAC's kernel for oc/uv (Things to do with root)
- Added a link to the NFL app (App Topics)
- Added a link to Swype with Voice Input (App Topics)
9.13.10
- Flashable .zip GPS fix (huge thank you to frankencat) - Root users only
9.3.10
- Trying to get the format done
- Added how to reboot (long press power - thank you kizer and Gad13)
- Added a line about the stock android calendar not being perfect.
9.1.10
- Added the stock calendar .apk's needed to replace crap TW calendar.
- Added how to have a true stock android launcher, with the .apk attached.
- Noted the Captivate camera sorts pics in the correct order (make sure you aren't looking at your old Vibrant folders).
- Added a link to jonnybuenos theme (no metamorph needed) and gave a pic of my setup.
- Added link to list of all ROMs (thanks to almyz125)
- Please PM me suggestion and give feedback on what you want.
8.31.10
- Added how to change fonts (big kudos to those guys!!!)
- Added what to do if your phone # does not show under your settings (rare this would happen, but it does). Misc Q. section.
- Added list of bloat apps that can be removed. (high demand).
- Replace the TW calendar with the calendar from Cyanogens ROM
8.25.10
- Added how to install the Captivate camera on the Vibrant (Things to do with Root section)
- Added the "Will I receive an OTA update if I root" question to the top (this should have been here already, my bad.)
- Added how to get into Stock Recovery (seen a lot of posts on this recently. Hope there is no issue with new phones).
8.23.10
- Removed Barnacle as the suggested Tether app.
- Added the Tether app that came with the Intl Galaxy (removed by carriers).
- Clarified that the Intl Galaxy flashable zips are for the bootup and shutdown (I love them).
- Clarified that in the dialer pressing letters filters results too, not just numbers (thanks sl0play)
- How to put the Camera in Night Mode (amazing photos in the dark, I was impressed. I hate flash photos anyway!).
- Added zaduma's alternate method for removing the startup/shutdown sounds (since he whined so much, haha, jk). Thanks for posting it man.
- Moved the Disabling startup/shutdown sounds under "Things to do With Root" from "Vibrant Topics."
8.15.10
- Added to the App Topics section - how to theme swype and notification bar (both can revert to stock)
- Under Things to do With Root - Use the i9000 boot animation/sound instead (no more pink box)
8.9.10
- Slide contact picture to text/call (thanks denny_1986)
8.8.10
- How to check an MD5Sum (verify the integrity of a downloaded file)
- How to PROPERLY update your radio (please note this is for future reference, as there are no known updated radios)
- How to hide folders (thanks achild)

good job .....

nice.. I want helvetica.
Which weather/clock widget is that? Beautiful widgets?
oh and how did you get rid of those ugly numberd dots which let u select homecreens.

Thanks. Good call about the widget, that is asked a lot when an image is posted, so I added it too. The change in font was awesome. Didn't expect it to have such an impact.

sigeltek said:
nice.. I want helvetica.
Which weather/clock widget is that? Beautiful widgets?
oh and how did you get rid of those ugly numberd dots which let u select homecreens.
Click to expand...
Click to collapse
Yeah it looks like Beautiful Widgets.. just select the Beautiful Home Smaller instead of Beautiful home and it'll appear like that on the screenshot. And those numbered dots are apart of the launcher alternatives, there are settings in there to get rid of them or customize.

BUMP
ive read many of these tips but only after hrs of reading.....nice to have them in one place
oh include the GPS fix...that sh*t was great

^ thank you. I was trying to hold off in the gps fix just because not everyone has an issue (our has not noticed) and some in that thread were still not getting it fixed. I'm confident the next update from Samsung will address this. please let me know other things that should be included though!

awesome thanks for this post, very informative

I had no idea about the swipe on the task bar to change the brightness. Thats nice.

great idea and thread

Maybe add (for rooted phones) the app lag fix, or at least a link to it?
Great list! This should be a sticky.
My phone is just so...VIBRANT

Great thread,i actually pm'd the mod asking about a faq and I did start one on my computer, but you beat me to posting it, and you have pretty much everything I documented. Great job!
Sent from my Samsung Vibrant with Swype!

Awesome man, appreciate that. There will always be room for more, let me know if I need to add to it! Feels good to be able to do something (albeit very little) for XDA, as much as they did for my g1.

How about something telling people how to use Metamorph, or a direct link to the Metamorph thread. Since we have two themes using it.
How to reboot phone into recovery or download mode.
How to use Odin, or what Odin is.
just some ideas.

Nice, will work on those this morning.

Okay, I have added some new items. I like some of the suggestions, and if they are not added it's probably because I am not comfortable enough with the subject to feel I should be teaching. I would love for others to help chime in... I'll add them to the list and do my best to make sure everyone gets credit for what they add to the list (some people care about this).

OP,
grear thread.
One addition
removing startup/shutdown audio files
http://forum.xda-developers.com/showthread.php?t=731059&highlight=shutdown

^ appreciate that man. I actually already have that included. I was debating on adding the removal of the startup/shutdown boot animations too.... i guess it could not hurt, but will be irrelevant once we have a custom ROM.

best mod for elocity A7

My tablet was runnin dexter mod 1.4 with all the patches, buy always had problems with the sd card and the usb thumb and I also had problems running some applications. Right now my A7 is running [mod] update04-19 patched market + google apps and my tablet is working almost perfect. I think this mod is better that dexter mode.
I hope everybody use this mode in their tablets.
Thanks Bestialbub for your great job.

i jus got my elocity a7
i tried to mod mine with the dexter mod 1.41 and mines wont work,
1st- i download the file didn't unzip it then i sent it to the SD card and rename it "update.zip".
2nd- i did the factory wipe/reset then i select to wipe all data
3rd- i select update.zip but i notice an message saying( E. can't read from SD card). i dont know if that is apart of the mod or what.
4th- when it is finish then i select reboot option and when it is done rebooting i get nothing new. can you help me out are do you know something that i might be doing wrong. i also did do the 1.42 patch aswell didn't work. are is there another mod that you can tell me how to get it.

hasn't been tested for application on dexter's rom, though i don't know of reason they shouldn't work. gapps can be flakey like that; actually, the files are all stock as they come from cyanogen, minus my patched market, which doesn't have any reason not to work on dexter's rom and has nothing to to with the installation of the rest of google applications, including the calendar and text messaging services; i introduced no signature issues else it wouldn't install on stock firmware.
what i can suggest, is that if you're doing this under wiped conditions; is that you need to do a "factory reset" in recovery AFTER applying my gapps update.
if you don't do the factory reset, there will be settings put in place by the provision.apk in dexter's rom (not sure if this has changed in 1.42) that may conflict with the setup of google-apps. it didn't w/ the gapps in v1 i ported from dexters rom in previous tests, but i was going for a vanilla install w/out mixed signatures/versions/dates. provision.apk is generally suggested to be removed when google-apps is intended to be installed, and it is by my installer, but not the changes done in the data folders, which is why the wipe is suggested. i think its role is replaced by the googlepartnersetup.apk, but i could be wrong.
theres also some build prop differences; some unnecessary (gsm provider info), some improved (fingerprint for added apps in addition to patched market and added permissions), and the same ones necessary for apps like skype to run.
sorry if that was too much info. i do that.
EDIT: i reviewed my original post, its step *2B*. i did update it to underline it, and provide explanation for its probable necessity.

bestialbub said:
provision.apk is generally suggested to be removed when google-apps is intended to be installed, and it is by my installer, but not the changes done in the data folders, which is why the wipe is suggested. i think its role is replaced by the googlepartnersetup.apk, but i could be wrong.
Click to expand...
Click to collapse
SetupWizard.apk replaces "provision.apk".
bestialbub said:
theres also some build prop differences; some unnecessary (gsm provider info), some improved (fingerprint for added apps in addition to patched market and added permissions), and the same ones necessary for apps like skype to run.
Click to expand...
Click to collapse
Audio fix, which enhances EQUlizer and probably a 10% audio increase, and rotation support for games is another one..
the gsm props were actually very much needed, as Google for a period enabled provider checking, so if no gsm provider was there, you could not activate a google account, so instead of ppl getting lost without MarketEnabler on a clean device, i included it for safety reasons so next time, we're prepared for such checks.. so it all serves a purpose, if you like to know more, XDA has excellent information on those topics.

SetupWizard.apk replaces "provision.apk".
Click to expand...
Click to collapse
thanks for the tip. i did concede i could be wrong, and you're right, i could find that small detail that setupwizard is known to replace functions for provision.apk. the same posts i'm finding on xda and cyanogenmod don't say anything about googlepartnersetup, however, yet its provided with gapps packages..
i also learn from demonstrated and practiced examples..
demonstrated examples i learned from, including your 1.2 rom shows your remove provision.apk and provide googlepartnersetup.apk, then reverse the decision in 1.4, i ASSUME based on signiture issues you had stated (i generally don't have those as i know i can re-use existing containers without having signature issues).
i also learned/ported from various sdk's, including google's sdk for gapp imports, and neither is required, but what is provided is sdksetup.apk.. me seeing a relation from sdksetup for an sdk/emu android device kinda indicates one might want googlepartnersetup as a counterpart on a physical device. (your 1.4 example does prove that doesn't have to be true).. but the google sdk shows that i don't need setupwizard.apk for google services either.
thought i'd relate, since most the general posted information i've seen on xda and cyanogenmod seem like vague gueses at best. though i suspect the people posting this information aren't necessarily the devs working closely with the files. just hobbists and modders making educated guesses like me.
Audio fix, which enhances EQUlizer and probably a 10% audio increase, and rotation support for games is another one..
the gsm props were actually very much needed, as Google for a period enabled provider checking, so if no gsm provider was there, you could not activate a google account, so instead of ppl getting lost without MarketEnabler on a clean device, i included it for safety reasons so next time, we're prepared for such checks.. so it all serves a purpose, if you like to know more, XDA has excellent information on those topics.
Click to expand...
Click to collapse
i was refering to MY gsm provided build prop information, i wasn't ragging on your build prop or rom addons. i followed suit to the gtab tnt modrom and added DIFFERENT gsm provider information than yourself (service provider id, not google client information). but it made no difference in gapps present demonstrated performance as this information DOES NOT (the stuff i provided/borrowed from tntlite) get passed into the android system or database files, as no service provider id is listed when opening marketaccess.apk, as it does on a phone device that does genuinely have this information.
i do concede to the thread discussion, tho, DEXTERS ROM IS THE BEST AND ONLY FULL ROM MOD FOR THE A7 TABLET!!!
my gapps mod is only intended to provide google applications ommitted by the manufacture. nothing more.
thanks for the indirect market patching instructions!

thanks am going to retry and see what happends

bestialbub said:
but it made no difference in gapps present demonstrated performance as this information DOES NOT (the stuff i provided/borrowed from tntlite) get passed into the android system or database files, as no service provider id is listed when opening marketaccess.apk, as it does on a phone device that does genuinely have this information.
Click to expand...
Click to collapse
Had the same issues, so i found the trick to be adding it in the boot.img using the default.prop, and it is added during bootup.. but now we're OT! so let's leave it at that.

a7 installation problem
these are the exat message i got (E:can't open/usb/update.zip)
(E:Can't mount USB:update.zip)
then underneath that it say (Finding update package)
then it say (Wait for 5 second)
(Installation time out)
(installation aborted)
(Formatting MISC)
these are all the thing it say during installation

these are the exat message i got was (E:can't open/usb/update.zip)
(E:Can't mount USB:update.zip)
then underneath that it say (Finding update package)
then it say (Wait for 5 second)
(Installation time out)
(installation aborted)
(Formatting MISC)
these are all the thing it say during installation

why post the same thing every 10 minutes?

.............................

demamalu said:
My tablet was runnin dexter mod 1.4 with all the patches, buy always had problems with the sd card and the usb thumb and I also had problems running some applications. Right now my A7 is running [mod] update04-19 patched market + google apps and my tablet is working almost perfect. I think this mod is better that dexter mode.
I hope everybody use this mode in their tablets.
Thanks Bestialbub for your great job.
Click to expand...
Click to collapse
That is not a mod it's the factory firmware with a patch to get market, I don't see in what way it is better than Dexter mod.

kevinppk said:
these are the exat message i got was (E:can't open/usb/update.zip)
(E:Can't mount USB:update.zip)
then underneath that it say (Finding update package)
then it say (Wait for 5 second)
(Installation time out)
(installation aborted)
(Formatting MISC)
these are all the thing it say during installation
Click to expand...
Click to collapse
When this happen I remove the .zip from file name or just rename the file but most time removing. .zip does the job...

[ROM]We're Back! [01/17/12] 3.2.1 Honeylicious Flash Glass HC Stock Based Kernel

Honeylicious 3.2.1 Flash Glass​
Now that the Holidays are over, and worked has slowed down somewhat, I have more time to spend with the thread.
Honeylicious was created for myself, by myself so I wouldn't have to rely on someone else's work.
I got sick of the "stick figure UI" that Google continues to produce, so what you'll see here is something more aesthetically pleasing to the eye. "Beauty is in the eye of the beholder", so if it doesn't please you, you can download
The UI has had a "glass" filter applied through Photoshop to give it a "glassy" finish.
You won't see any custom kernels here, nor revision updates, as these are all tried, tested, and true final releases.
What you will find is one of the fastest, smoothest, most dependable, and stable stock kernel based ROMs out anywhere for the Acer Iconia A500.!
Please read the "Install Instructions" carefully, and/or watch the Video Tutorial on how to flash correctly.
The 3.2.1 Youtube Fix is included in this Rom thanks to Civato.
Special thanks to Civato @ XDA for all his help in getting the camera working properly with this ROM, for the original apks he had given me, which have been changed immensely since that time, although there are a few png files that still remain the same, and all the other help and inspiration he has provided.
When you purchase a new automobile, it doesn't come with free driving lessons, neither does Android, and this ROM doesn't either. There are a few things you'll need to know before flashing a ROM.
If you're unsure of what you need to do, or simply can't follow the explicit directions in the "Install Instructions" (video included), take this link first to get you started. Click Here for the wealth of information in the A500 Wiki.
If you've previously flashed another one of Thor's ROMs with his custom kernel that he refuses to release the source code for, you may have problems flashing other ROMs until you COMPLETELY WIPE AND FORMAT YOUR SDCard. My personal opinion on this matter is, "if you have nothing to hide, then why are you hiding it?"
DO NOT USE ANY MODS FROM ANY OTHER VERSION OF HONEYLICIOUS AS YOU WILL BE MODIFYING YOUR SYSTEMUI.APK, AND FRAMEWORK-RES.APK WITH AN INCORRECT VERSION AND YOU WILL HAVE PROBLEMS!
Now, onto the ROM:
It's built on Stock PB G100W 4.010.05_COM_GEN1 found HERE: Stock base (stock kernel), Honeylicious sweet, rooted, tweaked for speed and stability, superuser and Busybox installed, and Bootloader.blob removed, that you've come to know for it's rock solid dependability, stability, and the most speed you can eek out of a stock based ROM, with an Icey Glass Finish!
What Works:
EVERYTHING!
What Doesn't Work:
NOTHING!
This ROM has had all of the useless stock apps that are constantly in "Running Services" ripped out, to give extra battery life, as well as speed. You'll notice in the "Running Apps Settings" screen shot that only two other apps are running (besides "Settings", and "Screen Shot It" which were needed to take the screen shot).
Apps Ripped Out:
Game Loft
Link to Facebook
Music
Nemo Player
Social Jogger
Sound Hound
Zineo
Replace Ripped out Glass App Pack HERE:All apps in one zip file (unzip main file to find individual apps in their own CWM Flashable zip files). So you can add in whatever you like to slow your system down once again.
What Extra Apps are included:
System Apps Added
Polaris Office
Extra Data Apps Added: (you may uninstall through "Settings", "Applications", "Manage Applications").
Avast Android Mobile Security (you need to open it once in applications to setup your preferences for it to run)
SDRescan
AdFree
HD File Explorer
HD BackGammon
HD Solitaire
HD Spades
Bluetooth File Transfer
Dolphin HD Browser
Fancy Widgets (free version)
Shake Calculator
Adobe Flash 11.1
Google Voice
Fancy Widgets has a battery meter included in the Weather/Clock widget. Go into Fancy Widget settings, "clock settings", "extra information", and tick "show battery level" for 1% increment battery levels. Fancy Widgets is the Weather/Clock widget shown in the screen shots, both weather and clock are "MIUI Inspired" style selected in "appearance" settings.
What's Different:
Ice Blue Glass Themed Rom
Five Extra Ice Blue Themed Wallpapers located in the stock Google Wallpapers.
Five Extra Themed Wallpapers located in the stock Google Wallpapers.
ICS Fonts
ICS Clocks
GPS Tweaks have been added to ensure rapid GPS Lock!
Latest Version of Superuser, and binaries.
All the goodness that 3.2.1 brings with it including the Newest Market. As you can see from the running applications Screen Shot there are only two running apps (aside from "settings", and "ScreenShotIt" which needed to be running to take the screen shot.
If you choose not to follow the explicit Install Instructions, not only do you do so at your own risk, I don't want to hear any whining about ANYTHING not working correctly, and post your questions HERE!
This ROM has been tested EXTENSIVELY with absolutely no problems or glitches whatsoever (hence "final release").
Normal disclaimer about how flashing a rom can be dangerous for your Tablet, blah, blah, blah. Please always perform a backup before flashing this ROM. If you some how screw the pooch, consider it "Pilot Error", and I am not responsible.
If you want to flash another kernel with this ROM, you do so at your own risk. I have no idea who's kernel will work with this ROM. If you do choose to flash a custom kernel with this ROM, please direct all questions regarding problems you are experiencing in the thread that you got your kernel from, as they will not be answered here.
If you are having problems with certain apps, remember this is a Stock Based Rom, so please direct your questions regarding said app to the developer of the app.
I took much of my own time and effort building this ROM, typing up instructions, and creating the install video. If you ask a question in this thread that has OBVIOUSLY already been answered in this OP, the only reply you will receive from me is this:
"See Original Post ".
Home Screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Apps Screen:
Location Settings Screen:
Running Apps Settings Screen:
Wallpaper Settings Screen:
Dolphin HD Browser Screen:
INSTALL INSTRUCTIONS:
CWM
Wipe Menu:
Wipe cache
Wipe Data (Factory Reset)
Wipe Dalvik Cache
Wipe Battery Stats
Mounts and Storage Menu:
Format System
Format Data
Format Cache
Format Flexrom
Install From Zip File
Choose File From SD Card
Locate "name_of_rom_to_be_flashed_here.zip " on your SD Card and click power button
Highlight "Yes - Install name_of_rom_to_be_flashed_here.zip" and click power button.
YOU WILL GET A RANDOM OFFSET MESSAGE DURING INSTALL. THIS IS NORMAL!
When install is finished, it will tell you so. Return to main CWM menu, and choose "Reboot System" and click power button.
Allow your Tab to continue the setup while guiding you through the prompts that will require user input.
Superuser has latest apk and binaries already installed on Icy Faux 3.2.1.
Install Instruction Video: (video was created before I was made aware that the version of CWM used in this Video has Thor's GPL non-compliant kernel in it). I have since reflashed drellisdee's GPL compliant forked Amon Ra touch screen recovery version 3.14 found HERE: Also added to attachments in this post.
DO NOT INSTALL THIS NEW RECOVERY IF YOU ARE NOT FAMILIAR WITH THE PROCESSES INVOLVED WITH FLASHING A ROM! THIS RECOVERY IS NOT FOR BEGINNERS. STAY WITH CWM!
Install Instruction Video
For those of you experiencing what you believe is low quailty WIFI with HC 3.2.1, watch this video with no wifi signal bars whatsoever! (Honeylicious 3.2.1 Flash Glass with no WiFi Patch)
(please excuse the sound of me clomping down the hall in my untied winter boots lol)

Reserved #3

@kjy2010 - First class job of presentation. I refuse to believe that anybody can screw up flashing your ROM after your ultra clear directions. I'm currently running Kekinash's 3.2 near stock rom but I like the look of your effort and I will flash it to my A500 as soon as I've got a spare minute. Once more thank you.

metpolds said:
@kjy2010 - First class job of presentation. I refuse to believe that anybody can screw up flashing your ROM after your ultra clear directions. I'm currently running Kekinash's 3.2 near stock rom but I like the look of your effort and I will flash it to my A500 as soon as I've got a spare minute. Once more thank you.
Click to expand...
Click to collapse
Thank you.
Post back after install, and let us know what you think!
Edit: I've seen some of your boot animations. If you'd care to create a custom animation for this ROM, I'd be more than happy to give you credit for it.

kjy2010 said:
Thank you.
Post back after install, and let us know what you think!
Edit: I've seen some of your boot animations. If you'd care to create a custom animation for this ROM, I'd be more than happy to give you credit for it.
Click to expand...
Click to collapse
You're very kind I'll give it some thought. I did just complete a small ICS anim, more for fun than anything else but you might like to look at it. I won't bother you by attaching it here but my good friend JaeKar99 has just added a preview gif of my anim to my post which is on the last page of the thread "Publish your A500 Boot Anims......." in the Themes & Apps section.

OP - Thought I'd throw this one at you, it's only a re-hash of what I did before but more specific to your rom. I have to admit that I don't have a single ounce of artistic ability in my body so what you get from me is always pretty simple and uncomplicated. I fear that it might not be "high tech" enough for your needs but worse case it costs neither of us anything and may give you some ideas.
Latest thought.....Should it be of interest to you then the "speed" and "display period" could easily be adjusted to your requirements.

ah, nice work kjy.
No problem on taking it apart and giving it your own twist.
That is why it is there for.
Don't forget it is BigDX is the one that did start this Modding,I changed an modded the ICS stuff into it so it worked on the A500.
I also got settings icones but didn't use them because I think it makes the settings menu out of balance.
If you want some stuff let me know.

3g USB
Hi all, I'm newbie with Iconia A500, I have 16gb wi-fi model, and I want to know if this rom supports 3g USB modem?
I want to know too if can I backup the original ROM before personalize my tablet for don't lose warranty and to recover them if necessary?
Thanks

Remove apps before flash
hi, kjy2010,
As you know, I'm very proud of your previous ROM, which I've flashed before. As I have Quickoffice installed, could be a problem if I remove the Polaris Office apk within the zip file (without winzipping it), before flashing this ROM?
Thanks!

alexrb said:
hi, kjy2010,
As you know, I'm very proud of your previous ROM, which I've flashed before. As I have Quickoffice installed, could be a problem if I remove the Polaris Office apk within the zip file (without winzipping it), before flashing this ROM?
Thanks!
Click to expand...
Click to collapse
This ROM has Polaris Office in it already, but you're free to do with it what you like bro! It's your's to do with as you like once you download it!

civato said:
ah, nice work kjy.
No problem on taking it apart and giving it your own twist.
That is why it is there for.
Don't forget it is BigDX is the one that did start this Modding,I changed an modded the ICS stuff into it so it worked on the A500.
I also got settings icones but didn't use them because I think it makes the settings menu out of balance.
If you want some stuff let me know.
Click to expand...
Click to collapse
Sorry bro, I keep forgetting BigDX. I modified the OP to reflect correct credit! And thanks again for the use of the APKs!

crbdigo said:
Hi all, I'm newbie with Iconia A500, I have 16gb wi-fi model, and I want to know if this rom supports 3g USB modem?
I want to know too if can I backup the original ROM before personalize my tablet for don't lose warranty and to recover them if necessary?
Thanks
Click to expand...
Click to collapse
First, you have to have root access, and CWM installed to flash a ROM. There are plenty of threads in this forum on the subject, please use the search function. They will guide you through root, CWM, and backup.
Second, some people have reported success using Civato's 3gmodem patch located in his thread.
Please take these other questions to the appropriate threads, not here

metpolds said:
OP - Thought I'd throw this one at you, it's only a re-hash of what I did before but more specific to your rom. I have to admit that I don't have a single ounce of artistic ability in my body so what you get from me is always pretty simple and uncomplicated. I fear that it might not be "high tech" enough for your needs but worse case it costs neither of us anything and may give you some ideas.
Latest thought.....Should it be of interest to you then the "speed" and "display period" could easily be adjusted to your requirements.
Click to expand...
Click to collapse
Thanks bro, I appreciate your work!
It's now posted in second post under Mods!

Fresh install after following the instructions above. The only apps i have installed from the Market are Busybox and Busybox Pro.
When I try to install Busybox it tells me 'There seems to be a problem with some of the utilities needed to install busybox'. Any suggestions anyone?

Savok said:
Fresh install after following the instructions above. The only apps i have installed from the Market are Busybox and Busybox Pro.
When I try to install Busybox it tells me 'There seems to be a problem with some of the utilities needed to install busybox'. Any suggestions anyone?
Click to expand...
Click to collapse
There are a few different versions of busybox and pro in the market, which one did you install?

Yeah I now see that STEricson's version is still broken. Ran with JRummy16 and is working correctly now.

Savok said:
Yeah I now see that STEricson's version is still broken. Ran with JRummy16 and is working correctly now.
Click to expand...
Click to collapse
Great! Thanks for the update on which one works!

kjy2010 said:
Thanks bro, I appreciate your work!
It's now posted in second post under Mods!
Click to expand...
Click to collapse
Thanks for your kind words and for your posted credit. I'm glad you could use the animation. By the way I'm not publishing this anim on my Theme thread I would rather it stayed exclusively here. Receiving a credit on your rom thread is almost like having my name up in lights in Holywood...lol

alexrb said:
hi, kjy2010,
As you know, I'm very proud of your previous ROM, which I've flashed before. As I have Quickoffice installed, could be a problem if I remove the Polaris Office apk within the zip file (without winzipping it), before flashing this ROM?
Thanks!
Click to expand...
Click to collapse
Oops, I misread your post, and I apologize. No problem taking out Polaris before install.

metpolds said:
Thanks for your kind words and for your posted credit. I'm glad you could use the animation. By the way I'm not publishing this anim on my Theme thread I would rather it stayed exclusively here. Receiving a credit on your rom thread is almost like having my name up in lights in Holywood...lol
Click to expand...
Click to collapse
lol Hardly the same, but thanks again for your work, and the compliment!

[REF] Nexus S ROM&Kernel Survival Guide

Introduction:
Please read and try to do some research instead of bombarding the developers with the same questions over and over, cluttering the threads with useless and recursive information. I will try to include terms for all the ROMs and Kernels in the Development Section, and remove the obvious things as much as possible. That doesn’t mean it will be perfect! I hope this will be useful for beginners, because it provides most of the basic information you need to get started. From now on, it’s up to you what you do.
I am fully aware that the information included here is for one time use, enough to get you started. Some of these things ARE well known by many of you, but they are still useful for others that are just beginning to learn about their NS. Besides definitions and explanations, I’ll also link to useful posts around xda and other sites, which provide further information on the respective subject.
ROMs​(ROM: a firmware that contains the Android operating system, and at least critical apps necessary for running your phone (but usually more apps than just those); can be stock or custom, and comes packaged in a *.zip file, flashable under recovery)
AOSP-built ROMs
Features: these are built from source code, from the Android Open Source Project, delivered free of bloatware and with rich customizations.
Some of the most popular (at the moment):
GSM VERSION: i9023/i9020A/i9020T
CyanogenMod 9 (still in alpha stages for now)
IML74K Android 4.0.3 Build 4 - Quad Lockscreen + More MODS (1/15/12)
nuhetri- v1.0.0
Slim ICS
AOSP+ V2.3|ICS 4.0.3|Source Built|Status Bar Widgets + Nice Mods
4G VERSION
vhgomez36-ICS-NXS-4G-4.0.3 r2.0
IML74K Android 4.0.3 Build 3 - Quad Lockscreen+More MODS
Crossbones v0.1.3
CyanogenMod 9 v4.0.3 - Alpha 20
Click to expand...
Click to collapse
Moddified ROMs
Features: these are modified versions of stock/AOSP ROMs/other custom ROMs, that keep the look of the base ROM up to a certain point. Also generally free of bloatware and with some additional modifications.
Some of the most popular (at the moment):
GSM VERSION: i9023/i9020A/i9020T
CyberGR-MOD|NS.NGN ver. 4.0 Ultimate
NSCollab 1.0.60
Ultimate ICS v4.0
-=Nexus MV 1.12.09=-
KANGY6 | ICS | AOKP |
NexusBeam 4.2.3
CyberGR-MOD|NS.NGN ver. 3.0 Hybrid ICS
Click to expand...
Click to collapse
MIUI-style ROMs
Features: unique type of ROM, developed by the Chinese. Has a strong iOS feel, highly customizable.
Some of the most popular (at the moment):
GSM VERSION: i9023/i9020A/i9020T
◄ ▌ [09.Jan.12] [ROM] Brainmaster's MIUI 2.1.6 ICS | Stable 2.3.7b v2 GB ▌►
DianXin OS (DX ROM) ICS | GB ROM
4G VERSION
◄ ▌ [28.Nov.11] [ROM] brainmaster's MIUI NS4G 1.11.25 | OTA ▌►
Click to expand...
Click to collapse
Stock ROM
Official releases from Google. The reasons most people here flash a stock ROM are: they want to update/ are bored of custom ROMs/ want to start over with their phone/ warranty reasons.
If you want to go back to stock for some reason, check this thread and read carefully, so you get the correct version for you.
Click to expand...
Click to collapse
Once we decide for a type or ROM (except stock), we head over to the ROMs thread and begin reading the list of features. Now would be a good time to PANIC! No, no, just kidding Those words do exist in some kind of language (not necessarily English). So here’s a very basic list of the most common terms found in our ROM threads:
Code:
[B]AOSP[/B]
[quote]Short for [url=http://source.android.com/]Android Open Source Project[/url]. Its purpose is to maintain the development
of the Android platform. Anyone can use the Android source code for
any purpose, and this is when custom ROMs come in. The [AOSP]
tag is used here to signal a ROM built from Google’s source, a pure
ROM, free of bloatware, with very good performance (generally)
and a very extended degree of customization. [/quote]
[B]Build.prop[/B]
[quote]This file is located in /system/build.prop. It holds the majority
of the runtime flags that are used when Android boots. Basically, it
lists specific information about your device, for applications to use.
You can also edit lines, with a file manager that has access to
/system, in order to change LCD density, build number, device
model and many more. [/quote]
[B]Busybox(ed)[/B]
[quote]Busybox is a collection of simple, but powerful Linux
utilities, that Android doesn't come with by default. It is used
by applications like MetaMorph and Titanium backup in order
to do special operations. You can manage ther version installed
on your phone with various apps from the [url=https://market.android.com/search?q=busybox&c=apps]market[/url] [/quote]
[B]/boot partition[/B]
[quote]This partition includes the bootloader and kernel, and
it enables the phone to boot. Wiping it must be done only if
requested, and the phone must not be rebooted after this operation.
Instalation of a new one is done by flashing a ROM that includes
the /boot partition. [/quote]
[B]/cache partition[/B]
[quote]Inside this partition, Android stores frequently accessed
data and app components. Performing a wipe of the /cache does
not affect personal settings or files, but simply gets rid of existing
data there, which gets automatically rebuilt in time. [/quote]
[B]Dalvik cache[/B]
[quote]Dalvik cache collects the information about the installed
applications and frameworks, and organizes them into a writeable
cache. Under this writeable cache, it stores the “optimized”
bytecode of the applications which is used by the applications
themselves later for a smoother operation. This dalvik cache can
grow as more applications are installed on your phone. It is safe
to wipe dalvik-cache. It will be rebuilt again when the phone
boots. This also explains why your phone takes ages to start up
for the first time. [/quote]
[B]/data partition[/B]
[quote]Also called userdata, the data partition contains the user’s
data – this is where your contacts, messages, settings and apps
that you have installed go. Wiping this partition essentially performs
a factory reset on your device, restoring it to the way it was
when you first booted it, or the way it was after the last official
or custom ROM installation. When you perform a wipe data/factory
reset from recovery, it is this partition that you are wiping. [/quote]
[B]Deodex(ed)[/B]
[quote]In Android file system, applications come in packages with
the extension .apk. These application packages, or APKs contain
certain .odex files whose supposed function is to save space.
These ‘odex’ files are actually collections of parts of an application
that are optimized before booting. Doing so speeds up the boot
process, as it preloads part of an application. Deodexing is basically
repackaging of these APKs in a certain way, such that they are
reassembled into classes.dex files. By doing that, all pieces of an
application package are put together back in one place, thus
eliminating the worry of a modified APK conflicting with some
separate odexed parts. The advantage of deodexing is in modification possibilities. On the other hand, since the .odex files were supposed
to quickly build the dalvik cache, removing them would mean
longer initial boot times. However, this is true only for the first
ever boot after deodexing, since the cache would still get built
over time as applications are used. [/quote]
[B]EFS folder[/B]
[quote]This is a VERY important folder. It contains phone-specific
information, like IMEI (encrypted in the nv_data.bin), wireless
devices MAC addresses, product code (also in the nv_data.bin)
and more. I advise you to make a backup of this folder, and keep
it safe. Remember, backup BEFORE flashing anything. Use [url=http://forum.xda-developers.com/showthread.php?t=1138873]this tool from forum member Borky_16[/url]. [/quote]
[B]Init.d[/B]
[quote]Init.d is very useful because it runs scripts that you can
just delete or replace in the /system/etc/init.d folder. The scripts
are also very flexible and can be used to call other scripts or set
a variety of system settings. [/quote]
[B]G-apps/Gapps[/B]
[quote]A long time ago, in a galaxy far far away, there was a
developer. And he used the Force for developing something called
CyanogenMod. For the happiness of the other folks in the galaxy,
he included some applications from Google. But the Emperor…
oh, sorry… But Google didn’t agree with him including these
proprietary apps, so they sent him a cease and desist letter.
Long story short, the Google Applications are provided separately
via a flashable .zip file. This is the case for pure AOSP ROMs,
and theoretically this is how it should be done. Theoretically. [/quote]
[B]Host File[/B]
[quote]Located in the /etc/ folder, it is used to block ads.
Most ROMs come with a “blocks ~95% of ads” statement. You
can also manage it with apps from the [url=https://market.android.com/search?q=ad+block&c=apps]market[/url]. [/quote]
[B]Logcat[/B]
[quote]The Android logging system provides a mechanism for
collecting and viewing system debug output. Logs from various
applications and portions of the system are collected in a series
of circular buffers, which then can be viewed and filtered by
the logcat command. You can use logcat from an ADB shell to view
the log messages.[/quote]
[B]NANDroid[/B]
[quote]When you take NANDroid backup, it means you are
backing up entire ROM. It’s basically a picture of the ROMs’
state . So when something goes wrong, you have the
chance to restore your phone to the backup state using the NANDroid. [/quote]
[B]NSTools[/B]
[quote]An essential tool that manages tweaks like BLN,
BLD, BLX, Liveoc, OC, CPU Governor, Deep idle and so on.
Written by arifhn, available in the [url=https://market.android.com/details?id=mobi.cyann.nstools&feature=search_result#?t=W251bGwsMSwyLDEsIm1vYmkuY3lhbm4ubnN0b29scyJd]market[/url] and on [url=http://forum.xda-developers.com/showthread.php?t=1333696]xda[/url],
this is a must have application for managing these various options. [/quote]
[B]Odex[/B]
[quote]These ‘odex’ files are actually collections of parts
of an application that are optimized before booting. Also explained at deodex(ed). [/quote]
[B]Power Menu[/B]
[quote]A multiple choice menu that appears when long pressing
the power button. In stock, these are critical options,
such as powering down the device. Developers have also
added options for taking snapshots,
rebooting normally/into bootloader/into recovery and so on. [/quote]
[B]Radio[/B]
[quote]The radio controls basic low-level functions like
network connectivity, Wi-Fi, and GPS. It comes as a radio.img file,
and generally, developers try to leave this out of their
ROMs because different areas require different radios. Pay attention
to this when choosing to flash a new ROM. There is a reference
thread with all the radios [url=http://forum.xda-developers.com/showthread.php?t=1116884]HERE[/url]. [/quote]
[B]Ramdisk[/B]
[quote]Ramdisk.img is a small partition image that is mounted
read-only by the kernel at boot time. It only contains /init
and a few config files. It is used to start init, which will
mount the rest of the system images properly and run the
init procedure. A Ramdisk is a standard Linux feature. [/quote]
[B]Recovery[/B]
[quote]Recovery mode in Android provides an environment for
users to wipe cache, data, factory reset the phone or update
it with a .zip file. There are custom recoveries like [url=http://www.clockworkmod.com/rommanager]ClockworkMod[/url] or [url=http://forum.xda-developers.com/showthread.php?t=1399565]TWRP[/url], which provide additional functionality,
and are very popular for this reason. [/quote]
[B]RTL[/B]
[quote]Short for Right-to-Left and refers to support for languages requiring this type of writing. [/quote]
[B]SetCPU[/B]
[quote]An application built by coolbho3000, which allows CPU speed tweaking and management, allows overclocking, and sets CPU governors. Available on [url=http://forum.xda-developers.com/showthread.php?t=505419]xda[/url] and the [url=https://market.android.com/details?id=com.mhuang.overclocking&feature=search_result#?t=W251bGwsMSwyLDEsImNvbS5taHVhbmcub3ZlcmNsb2NraW5nIl0.]market[/url] (try to buy from the market if you want to support his work). [/quote]
[B]SIM Toolkit (STK)[/B]
[quote]Now if you live in the States, you might not even know what
the STK is, so a bit of explaining is in order. Put simply, the STK
allows carriers to load a simple set of menus and 'applications' on
your SIM card. Earlier versions of Android, up to 1.6, actually
included a rather rough, but functional Sim Toolkit application, but
at some point it was dropped. [/quote]
[B]/system Partition[/B]
[quote]This partition basically contains the entire operating system,
except the kernel and the bootloader. This includes the Android
user interface as well as all the system applications that come
pre-installed on the device. Wiping this partition will remove Android
from the device without rendering it unbootable, and you will
still be able to put the phone into recovery or bootloader mode
to install a new ROM. [/quote]
[B]Unsecured Boot.img[/B]
[quote]Used for adb remount, gets you root by default on a shell. (ro.secure=0) [/quote]
[B]V6 Supercharger Script[/B]
[quote]A more technical explanation could be done here, but
the bottom line is that this is used to make your phone run
faster, by better management of memory. [/quote]
[B]Zipaling[/B]
[quote]Zipalign is an archive alignment tool introduced first
time with 1.6 Android SDK (software development kit). It
optimizes the way an Android application package (APK) is
packaged. Doing so enables the Android operating system to
interact with the application more efficiently, and hence has
the potential to make the application and overall the whole
system much faster. Execution time is minimized for zipaligned
applications, resulting is lesser amount of RAM consumption
when running the APK. [/quote]

Kernels​
(Kernel: provides the most basic level of control over all of the phone's hardware; consider them a link between the hardware components and the ROM)
With kernels it’s a little bit easier. At least this is how it may seem. Right after rooting the device, many choose to first flash a kernel (including me) mostly because it gives the opportunity to flash something while not modifying the appearance of the phone. Furthermore, it gives you the ability to change things like CPU clock speed, internal and ARM voltages, and also have different patches and mods designed to prolong battery life/improve speed/provide stability.
Kernels are abundant for the NS, so I’ll be naming the most popular:
GLaDOS
ICUP Kernel Edition
*Matr1x*
SG-NS-ICS - 14-01-2012 - 11UV|Voodoo|BFQ|BIGMEM|BLN|BLD|BLX|TW|Lazy|3.0.15
Netarchy Nexus
NS+4G Trinity (E)UV and OC CM9 + m(any) roms
Click to expand...
Click to collapse
Many users ask around about which could be the best kernel. For this, xda member bedalus decided to set up a thread where he benchmarked ICS kernels (accurately enough). This should give you an idea where to start from.
Also, there are terms which appear frequently in the features list of kernels, so here’s a very basic list of the most common terms found in our kernel threads:
Code:
[B]BFS[/B]
[quote]A Brain F**ked Scheduler will perform better on CPU intensive
process, which usually cause them to get higher benchmark scores.
However because it only dedicates minimal CPU to background
processes you may experience lag when switching quickly between
different tasks. [/quote]
[B]BLD[/B]
[quote]Backlight Dimmer provides an option for the lights of the
touchkeys to be turned off after a certain period. This can be
tweaked from NStools. [/quote]
[B]BLN[/B]
[quote]Backlight Notification is a mod developed by neldar,
which converts the touchkey backlights into a notification led. [/quote]
[B]BLX[/B]
[quote]Battery Life eXtender, from Ezekeel, manages the maximum
percentage to which the battery is being charged. By default,
the Nexus S is charged to about 95% capacity. [/quote]
[B]CFS[/B]
[quote]A Completely Fair Scheduler is more suited for multitasking.
You may notice performance issues when using CPU heavy
activities like HD games because it is trying to keep the other
processes in the background equal to the one that is hogging the
CPU. It should also be noted that, as designed, this type of
kernel should handle going from listening to music to sending a
text to surfing the web with minimal lag. [/quote]
[B]Deep IDLE[/B]
[quote]Another mod by Ezekeel, which allows the phone to
enter a “deep idle” state while performing tasks when the screen is
off. For example, listening to music with the screen off and
Deep Idle turned on, you should get better battery life than
without Deep Idle. [/quote]
[B]Governors [/B]
[quote]There is a much to be said here, and this would stretch
this dictionary too much. I recommend reading [url=https://github.com/CyanogenMod/cm-kernel/blob/android-msm-2.6.37/Documentation/cpu-freq/governors.txt]THIS[/url], a very good explanation of
governors—from CyanogenMod. [/quote]
[B]OC (Overclock)[/B]
[quote]An overclock is usually one of the first things users
figure out after gaining root access on a new phone. If you
want to push your smartphone's CPU to run more clock cycles,
you have to know that extra power isn't coming from nowhere.
However, it is generally considered good practice, but it
depends on your handset. Some phones may be able to support
overclocking to 1.4 GHz, while others may never get past
1.2 GHz. Just proceed with caution. [/quote]
[B]Touch Wake[/B]
[quote]Yes, yes, Ezekeel again. This mod allows the user to
wake the device after a set amount of time, just by touching
the screen or the capacitive buttons. The time after which the
screen no longer responds to a touch is set with NStools. [/quote]
[B]UV (Undervolt)[/B]
[quote]This refers to lowering the voltage to conserve power while
still achieving the same performance, assuming your settings
remain stable. Both SetCPU and NStools allow the user to change
voltages. Like overclocking, this is also a trial and error process,
because each phone is different. The benefits are low energy
consumption and less thermal output. [/quote]

Tools & Mods​
So you have a rooted phone. Maybe even a custom Kernel or ROM, whatever works for you. But you still want to be a tad different from the other guys using the same configuration as yours. So here's a small selection of mods and apps developed by members of the community, enough to get you started. Feel free to experiment, and remember: read before flashing, search before asking and you should be alright!
Mods for AOSP+ Rom
[BOOTANIMATION] Plain, Simple & Colorful + color variants
Nova Launcher
Flavours for stock OTA ICS 4.0.3
Search key to ICS recent apps [add CM9 version]
[NS][NS4G]FaceLock for ICS 4.0.3
Enable on-screen buttons in ICS roms
Click to expand...
Click to collapse
NOTES:
I am hoping this little survival guide is useful FOR BEGINNERS in understanding the basic terminology used here in the Nexus S sections. As the title suggests, it was made with beginners in mind, so I don’t want posts of so called “experts” saying how they already knew this.
IMPORTANT: I do NOT guarantee the explanations written here are completely accurate or complete, FOR NOW. I will keep working on this, correcting mistakes as I continue to read.
If you find something that you think is not correct, or consider something must be added, please post here, together with a link to a credible source.
All of this came from sources off the internet, so please bear with me. Also, sorry for any typing mistakes. If you see any, please be sure to signal them
If I have helped you in any way, or if you appreciate the work invested in this (now and for the future), press the THANKS button.
Thank you! (Hoping to see this stick) And many thanks to all the great devs working on ROMs and Kernels for us. Keep up the great work!
W O R K - I N - P R O G R E S S
(I will be sure to notify you when I believe this is complete)​

Wow this is a very good idea. Thanks!
Sent from my Nexus S using Tapatalk

ljordan2 said:
Wow this is a very good idea. Thanks!
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Thank you! I'm just worried it is a little bit long... but in the next couple of days I will be making it more reader friendly
Transmitted from somewhere in space... from my Nexus S... and Tapatalk.

nice thread! thanks

Hey great post, i still haven't rooted my nexus s but you just made me flash a kernal. I was tkinking about it but never too serious.
thanks!

Love it!!! Cleared so much up (you recieved my first Thanks button click!)
Just wanted to clarify something about the Kernel. My Rom is stock 2.3.6 that was received OTA when I unboxed the phone (Nexus S GSM i9020A, I'm in Canada). The bootloader is unlocked, phone rooted with CWM recovery via one click (QBKing's Video). Am I able to flash a custom Kernel to a stock Rom? Reading the above seems to lean towards the "yes", but wanted to make sure first.
Also, do not use the one click method on the Nexus S GSM if you want to easily return to stock. The one click stock only supports the 4G, which is extremely silly and inconvenient IMO. I'm currently still trying to figure out how to return to stock, incase something does happen and the phone needs warranty work. Let's just say, I'm not making much progress and this is extremely uncomfortable ATM..

Great thread and idea, all seems spot on. I vote for sticky.
Also, heX, you can flash a custom kernel on a stock rom as long as you have an unlocked bootloader and custom recovery. I'd recommend you backup all you need with TB or similar, then do unlock your bootloader if you havn't already (search around for how to do this, described in rooting guides). Just remember this will delete -ALL- user data, including sdcard. After this you can flash a su.zip to have proper root access, and you can easily install a stock image with a custom bootloader then lock the bootloader afterward for pure stocky goodness.

Thanks so much for taking the time to do this
Sent from my Nexus S using XDA App

Harbb said:
Great thread and idea, all seems spot on. I vote for sticky.
Also, heX, you can flash a custom kernel on a stock rom as long as you have an unlocked bootloader and custom recovery. I'd recommend you backup all you need with TB or similar, then do unlock your bootloader if you havn't already (search around for how to do this, described in rooting guides). Just remember this will delete -ALL- user data, including sdcard. After this you can flash a su.zip to have proper root access, and you can easily install a stock image with a custom bootloader then lock the bootloader afterward for pure stocky goodness.
Click to expand...
Click to collapse
TYVM Harbb!
Yes, currently the bootloader is unlocked, phone rooted and CWM installed. I did a TB backup prior so I could quickly restore my apps and settings. All is running well.
I tried to flash a full stock Rom back to the phone, but have run into an issue in doing so, posted here
I'm still awaiting some help with regards to that one, hopefully all will be well soon.
I'm not sure why I got spooked in doing this. I'd like to try the Matrix kernel and there are various Roms that definitely sound fantastic, but part of me just wants it back to stock so warranty and OTA are restored as the phone is only a few weeks old.

very useful for us newbie, thanks for sharing

heX79 said:
TYVM Harbb!
Yes, currently the bootloader is unlocked, phone rooted and CWM installed. I did a TB backup prior so I could quickly restore my apps and settings. All is running well.
I tried to flash a full stock Rom back to the phone, but have run into an issue in doing so, posted here
I'm still awaiting some help with regards to that one, hopefully all will be well soon.
I'm not sure why I got spooked in doing this. I'd like to try the Matrix kernel and there are various Roms that definitely sound fantastic, but part of me just wants it back to stock so warranty and OTA are restored as the phone is only a few weeks old.
Click to expand...
Click to collapse
Ok I see you have the att version, so i9020A. When android 4.0.3 came out, I wanted to go back to stock 2.3.6 so that I could update officially. Anyway, I downloaded a full stock ROM, flashable via recovery, from HERE and all went smooth for me. (the link is to the i9020A version, of course I used the i9023 version). Try the stock posted there, and see if you get any error. I think you should be ok now, if not, post back. Remember, this takes you fully back to stock, no cwm, no nothing custom.
I am glad to see that I helped somenone, I will make some modifications this afternoon, still 9am here (maybe add stuff to the dictionary and post it to google docs or something like that, just to make it easier to scroll through and more). Any suggestions or critics are welcome!
EDIT: Guide updated:
-better arrangement of the dictionary (will be adding new terms tomorrow, had to study for an exam today)
-added Tools & Mods section (will build on that later on)
-more to come...

great post OP

Nice thread! Great Work ,Thanks

Hey thanks! Happy to see good feedback on this.
Transmitted from somewhere in space... from my Nexus S... and Tapatalk.

Great beginners guide, and thanks for the link!
For kernel benchmarks and more, see here: http://goo.gl/mpeHI

Thanks very much! I will give it a try shortly, just to confirm if I recieve any issues. I've also installed the recommended CWM version for my model, not sure if it makes a difference, but I flashed 5.0.2.0 anyway as the version I was getting an error with had a higher build number.
Right now I'm enjoying AndroidME 1.2.3 with Speedy 6 kernel and have no complaints so far! (Kernel updated this morning from Speedy 5)
I will report back with any issues once I have some time to do a Nandroid backup and test the stock Rom.
Thanks for your help!
It's nice to know there's a way to revert back to stock, should anything need servicing! I've also started reading up on Odin
flodb113 said:
Ok I see you have the att version, so i9020A. When android 4.0.3 came out, I wanted to go back to stock 2.3.6 so that I could update officially. Anyway, I downloaded a full stock ROM, flashable via recovery, from HERE and all went smooth for me. (the link is to the i9020A version, of course I used the i9023 version). Try the stock posted there, and see if you get any error. I think you should be ok now, if not, post back. Remember, this takes you fully back to stock, no cwm, no nothing custom.
I am glad to see that I helped somenone, I will make some modifications this afternoon, still 9am here (maybe add stuff to the dictionary and post it to google docs or something like that, just to make it easier to scroll through and more). Any suggestions or critics are welcome!
EDIT: Guide updated:
-better arrangement of the dictionary (will be adding new terms tomorrow, had to study for an exam today)
-added Tools & Mods section (will build on that later on)
-more to come...
Click to expand...
Click to collapse

You're welcome! Looking forward to an update with your stock flashing situation. I also used ClockworkMod 5.0.2.0 a long time. I'm now on 5.0.2.3 only for the better menu layout.
Transmitted from somewhere in space... from my Nexus S... and Tapatalk.

just one question...
can i install more than one kernel at a time...
for eg.like one i installed for battery usage and othr for sound..
can i do tht

[Q&A] [ROM][CM12][5.0][Lollerpop][KANG] Grouper nightly kangs

Q&A for [ROM][CM12][5.0][Lollerpop][KANG] Grouper nightly kangs
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][CM12][5.0][Lollerpop][KANG] Grouper nightly kangs. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Will not flash
I keep trying to flash this rom and all I get in TWRP is Error executing updater binary. I was able to flash other 5.0 AOSP roms but I am having trouble with this one.
BSZAospLP v1.1 flashed fine as well as an older build of your rom. The last 2 builds will not flash at all. Same error. TWRP and MultiROM are updated to current versions.

My rom shows a camera installed when I go to manage apps, but it doesn't show in the app drawer and I can't access it. Stock launcher no hidden apps or anything

dcwiker05 said:
My rom shows a camera installed when I go to manage apps, but it doesn't show in the app drawer and I can't access it. Stock launcher no hidden apps or anything
Click to expand...
Click to collapse
For me this issue existed already on KitKat. I think the camera app is kinda hidden because the N7 camera isn't designed to take pictures. But some launchers allow you to create an activity shortcut to the respective activity of the camera app to launch it. This works fine for me with action launcher.

First off, I do know that this is a work in progress, and so far, it has been an excellent release. But, I want to know if anyone else is noticing the following issue below or if it could just be my device.
Has anyone noticed if their keyboard response is slow within games, such as Game of War? I'm noticing severe lagging in the keyboard when I'm attempting to chat, send email or do searches. Anything that requires keyboard entry is slow.
I've noticed this as well in other games. I also am running CM12 on my Droid RAZR HD (XT926) and keyboard response is fine. It only seems to be with this build on my Nexus 7 (2012) WiFi, so I can't tell if it's just because Grouper Nexus 7 is just not up to the task of running this, or if it's just the ROM is still early.
I've tried both the stock keyboard that comes in CM12 as well as my default that I use, Swiftkey. Again, on my phone (XT926), Swiftkey works great in the games.
Outside of games on my Nexus, the keyboards work fine. It's only within games that I see the severe lagging. And by severe lagging, I mean that I will select into the input box to start typing and then the keyboard may not show up for 15 seconds. One time, it took over 30 seconds. And then, once the input box has focus, typing on the keyboard appears to do nothing and then maybe another 15 to 30 seconds later, it starts to show up, one type at a time, with seconds of lag between types. Sometimes, it eventually clears up for a bit, but if I start to type longer, it can then start to lag again like before.
Just curious if anyone else has noticed this. I've done a clean wipe. I'm running 11/28 build with f2fs on the data partition, and I'm running it with the MKernel-a72 kernel.
Thanks!
UPDATE:
Okay, downloaded the 12/01 image and the keyboard issues appear to have been taken care of.

for me too the 20141205 build is not booting

it is checked. I am trying

pie control
How far are we from setting pie control, either slim pie or paranoid pie. In a lolipop release? This is the most important feature for me.

jasius said:
How far are we from setting pie control, either slim pie or paranoid pie. In a lolipop release? This is the most important feature for me.
Click to expand...
Click to collapse
I think CM discarded Pie control, they didn't include it in CM11. I put my hopes in SlimLP, since Slimkat had a decent Pie implementation.

Problems
Hi,
thanks for the ROM. I have a few questions, problems for which I would like to ask for help:
data and cache partitions are mounted without the discard options. Is this normal? Can this be added?
GPS is not working: E. g. the GPS status app (or Google Maps) does not see a single satellite.
I cannot copy files from the Windows Explorer or by adb push to the (emulated) sdcard/internal memory: error message of adb: failed to copy 'xxx' to '/storage/emulated/0/xxx': Read-only file system
Thank you for your help

Ok answering myself: With the latest build (141222) (part ?) of the GPS problem and the copy problem have gone:
The GPS status app can now find the satellites. Also in one map app (OruxMaps) the location is shown. Unfortunately, it still does not work with google maps.
For whatever reason it is now possible to copy files and directories with the Windows Explorer to the "internal memory". But not with adb push?!?
jmozmoz said:
Hi,
thanks for the ROM. I have a few questions, problems for which I would like to ask for help:
data and cache partitions are mounted without the discard options. Is this normal? Can this be added?
GPS is not working: E. g. the GPS status app (or Google Maps) does not see a single satellite.
I cannot copy files from the Windows Explorer or by adb push to the (emulated) sdcard/internal memory: error message of adb: failed to copy 'xxx' to '/storage/emulated/0/xxx': Read-only file system
Thank you for your help
Click to expand...
Click to collapse

Is mtp not working on the latest build as of yesterday?
It's not showing up under Device Manager at all so I can't browse for drivers. I've tried disabling and reenabling debugging but I get nothing. When I go to Storage and try to select USB Computer Connection, I get no options or drop down.
It does charge however.

Black screen upon boot
I just flashed the latest nightly after converting it to F2FS using the Windows tool. I also did a full wipe and manually checked to make sure system, data and cache were in f2fs. The ROM boots and 'optimises' apps just fine but then I just get a backlit black screen, only the power button works.
What might be my mistake?