Rooting and Recovery Easy Guide for I9500 only - Galaxy S 4 Q&A, Help & Troubleshooting

Hello Friends,
The best way i found to root / install recovery for my S4 are below
Please do the steps at your own risk i m not responsible for anything that may happen to your device
Before flasing this make sure you have all drivers req on the PC best way is install kies ( make sure all kies applications are closed else u myte hvae issue flashing)
Note:all this i m sharing here is not my work but just trying to help more numbers of XDA users i m not a developer but a user
For Rooting (download the file from original thread below )
Click Me
Odin from Attached Files
How to install
put the device into download mode poweroff / press volume down+home+power key and connect
Open Odin
CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5 start flashing
Do not select/tick anything else in odin
All thanks to Chainfire the Genius thank him in his thread please
For Recovery CWM "Phil3759"
Click Here
Download Recovery from above link
Unzip it, flash as PDA in Odin
Click the PDA button, and select recovery-clockwork-X.X.X-i9500.tar.md5
All thanks to "Phil3759" thank him in his thread please
All done u will have Root & Recovery both
Thanks to Chainfire :good:
Thanks to Phil3759:good:
Thanks to Odin:good:
Hope this helps

Thanks for this, but can you please tell me how come your method does not use "Cofface’s ClockworkMod Recovery"? I was reading a couple of posts on the net and saw
you have to flash the Cofface’s ClockworkMod Recovery on your device before you can root it, there’s no way around it, and is a strict requirement if you wish to root your Galaxy S4
Click to expand...
Click to collapse
.
Saw it here: http://www.redmondpie.com/root-galaxy-s4-gt-i9500-on-android-4.2.2-how-to-tutorial/
and here http://gs4.wonderhowto.com/how-to/root-your-samsung-galaxy-s4-gt-i9500-0146685/
Can someone advice?
Thanks

Paparasee said:
Thanks for this, but can you please tell me how come your method does not use "Cofface’s ClockworkMod Recovery"? I was reading a couple of posts on the net and saw .
Saw it here: http://www.redmondpie.com/root-galaxy-s4-gt-i9500-on-android-4.2.2-how-to-tutorial/
and here http://gs4.wonderhowto.com/how-to/root-your-samsung-galaxy-s4-gt-i9500-0146685/
Can someone advice?
Thanks
Click to expand...
Click to collapse
I had tried using that method on my i9500 and it does not root the device even after flasing the file i cant enter recovery and it stays on stock recovery so what i did is root the cell with adam kernal and the use the Cofface recovery to have CWM
This is what i found easy for me and created a thread which could help others also

So, do we need to flash "Cofface recovery" after rooting with your method?
If yes, can you also please add "how to flash "Cofface recovery" to your original post so we can have full steps here?
Thanks

Paparasee said:
So, do we need to flash "Cofface recovery" after rooting with your method?
If yes, can you also please add "how to flash "Cofface recovery" to your original post so we can have full steps here?
Thanks
Click to expand...
Click to collapse
Yes thats the way we can do
in while i will do the changes in the thread and add recovery method also

..

I am getting this error, what does it mean ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

huzefa_from_kuwait said:
I am getting this error, what does it mean ?
Click to expand...
Click to collapse
Preferences, unselect "Run Samsung Kies automatically when a device is connected
Make sure u have kies application not running on backgroud should be close
Also try a different usb port on the computer
And if that doesn't work try a different cable

I dont have Kies installed.
I installed the drivers from "Samsung_USB_Driver_for_Mobile_Phones_v1.5.14.0.exe"
I have tried a different USB port, now I will try on another computer.

huzefa_from_kuwait said:
I dont have Kies installed.
I installed the drivers from "Samsung_USB_Driver_for_Mobile_Phones_v1.5.14.0.exe"
I have tried a different USB port, now I will try on another computer.
Click to expand...
Click to collapse
Possibly there cud be some driver issue install kies but keep the preferences for kies uncheck while using and try should work

On another computer the drivers are not working at all.
I have removed all drivers and installed Kies. Now its updating.
After that I will try again.

huzefa_from_kuwait said:
On another computer the drivers are not working at all.
I have removed all drivers and installed Kies. Now its updating.
After that I will try again.
Click to expand...
Click to collapse
in the main while try also flashing root method by chainfire this also works well and see whats the result
http://forum.xda-developers.com/showthread.php?t=2292615

Tried that also, same thing..
Stops at SetpConnection
Its a clear indication something is wrong either with the cable or my computer ( I can't understand what )
Mine is Windows 7 - 64 bit, however I shall format my computer and install Windows XP on it and try

huzefa_from_kuwait said:
Tried that also, same thing..
Stops at SetpConnection
Its a clear indication something is wrong either with the cable or my computer ( I can't understand what )
Mine is Windows 7 - 64 bit, however I shall format my computer and install Windows XP on it and try
Click to expand...
Click to collapse
I think windows 7 is just fine no need to go with xp
even i cant understant whats the issue, BTW u have USB debugging on rite ?

1) Disconnect your phone from the Computer
2)Open Device Manager
a)Go to Start Devices and Printer.(Windows 7)
b)Then right-click Device Manager.(Windows 7)
3)Look Down at Universal Service...
4)Expand it and look at USB Composite Device.Right-Click on it and Uninstall.
or
5)Uninstall everything in there.
6)Connect Device Open Odin and see if it works
7, Try changing USB ports that could be the main issue
Note u have to connect device in download mode

I tried CF-Auto-Root, earlier it gave me the same message but after I changed from Windows 7 to Windows 2003, things went normal.

huzefa_from_kuwait said:
I tried CF-Auto-Root, earlier it gave me the same message but after I changed from Windows 7 to Windows 2003, things went normal.
Click to expand...
Click to collapse
Oh thats nice finally

123hiten said:
I had tried using that method on my i9500 and it does not root the device even after flasing the file i cant enter recovery and it stays on stock recovery so what i did is root the cell with adam kernal and the use the Cofface recovery to have CWM
This is what i found easy for me and created a thread which could help others also
Click to expand...
Click to collapse
i did it worked perfectly! (btw at first i downloaded old version it didnt work new one works awesome!) btw this one is easiest! i rooted using other method coz the downlaod link was banned here and also i liek to ahve the CWM reovery! backups and stuff

kamranhaghighi said:
i did it worked perfectly! (btw at first i downloaded old version it didnt work new one works awesome!) btw this one is easiest! i rooted using other method coz the downlaod link was banned here and also i liek to ahve the CWM reovery! backups and stuff
Click to expand...
Click to collapse
You can have CWM that also is posted at 1st
Sent from my GT-I9500 using xda premium

NIce thread buddy. :good:
BTW i have tried rooting through Cofface recovery & got success. Also add latest ODIN 3.07 V from here.
Same thing happened with me when I was using Galaxy S3 ODIN V3.07 for rooting my S4.

Related

Video TUTORIAL: How to Root your Galaxy Tab 8.9 and Install Clockwork Recovery

Hi Guys,
I made a small video tutorial on how to root the galaxy tab 8.9 (GT-P7310/P7300 ONLY) and how to install clockworkrecovery on it based on some tutorials that I came across here.
The video might be helpful to someone.
Credit to mramirezusa and alterbridge86.
ROOT:
http://www.youtube.com/watch?v=gh9KVGUBm6o
CWM:
http://www.youtube.com/watch?v=FZzNY9lFGQM
Thanks for watchin.
Cursed4Eva
Thanks good video's i will root my tab now
Sent from my HTC Desire HD A9191 using XDA App
fase said:
Thanks good video's i will root my tab now
Sent from my HTC Desire HD A9191 using XDA App
Click to expand...
Click to collapse
Glad to help bro Let me know how it goes
ashwin123 said:
Hi Guys,
I made a small video tutorial on how to root the galaxy tab 8.9 (GT-P7310/P7300 ONLY) and how to install clockworkrecovery on it based on some tutorials that I came across here.
Cursed4Eva
Click to expand...
Click to collapse
Thanks for video, it is clear and I am now more comfortable to root.
However, I have one question. Is it really necessary to install Samsung Kies? I have installed the Kies software but failed to connect to Tab. I called Samsung service center and still cannot resolve the fail connect issue (I had tried connect to different USB ports). From the video, the purpose of the kies is seems to allow to copy the root.zip file to tab. Am I right? Thanks.
yongck7 said:
Thanks for video, it is clear and I am now more comfortable to root.
However, I have one question. Is it really necessary to install Samsung Kies? I have installed the Kies software but failed to connect to Tab. I called Samsung service center and still cannot resolve the fail connect issue (I had tried connect to different USB ports). From the video, the purpose of the kies is seems to allow to copy the root.zip file to tab. Am I right? Thanks.
Click to expand...
Click to collapse
Glad to help bro.
As for kies, no it is required so that odin is able to detect the phone, kies installs the required drivers to send out the commands to the device so that the firmware can get flashed, it is mandatory to install it
Hope I helped
ashwin123 said:
Glad to help bro.
As for kies, no it is required so that odin is able to detect the phone, kies installs the required drivers to send out the commands to the device so that the firmware can get flashed, it is mandatory to install it
Hope I helped
Click to expand...
Click to collapse
Thanks. So we have to ensure Kies work properly (able to connect Tab) in order to successfully root, else there is potential soft brick, right?
yongck7 said:
Thanks. So we have to ensure Kies work properly (able to connect Tab) in order to successfully root, else there is potential soft brick, right?
Click to expand...
Click to collapse
Without kies installing the drivers, odin will not detect your device... this is as per knowledge, someone please correct me if am wrong
ashwin123 said:
Without kies installing the drivers, odin will not detect your device... this is as per knowledge, someone please correct me if am wrong
Click to expand...
Click to collapse
No Kies needed for drivers, just go here and download the drivers (tried them myself and they're in my guide too, no complaints so far).
nirogu325 said:
No Kies needed for drivers, just go here and download the drivers (tried them myself and they're in my guide too, no complaints so far).
Click to expand...
Click to collapse
Okay thanks, kies does the same thing too right? (but its larger.... i understand)
ashwin123 said:
Okay thanks, kies does the same thing too right? (but its larger.... i understand)
Click to expand...
Click to collapse
That and sometimes brick devices. Me and a lot of people don't trust that thing.
nirogu325 said:
That and sometimes brick devices. Me and a lot of people don't trust that thing.
Click to expand...
Click to collapse
Okie dokie, future vids will have this instead of kies... R.I.P Kies
Hope this thread isn't abandoned, I rooted by the video, everything went smoothly, went to play store & installed superuser. Installed fine, opened it, seemed normal. Then I figured I'd test it out by installing adfree. The popup box for permission never popped up & I get the force close or report box for superuser. Have not installed cwm recovery yet. Please help, & thank you
Sent from my PC36100 using Xparent Blue Tapatalk 2
aheeejd said:
Hope this thread isn't abandoned, I rooted by the video, everything went smoothly, went to play store & installed superuser. Installed fine, opened it, seemed normal. Then I figured I'd test it out by installing adfree. The popup box for permission never popped up & I get the force close or report box for superuser. Have not installed cwm recovery yet. Please help, & thank you
Sent from my PC36100 using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
Reboot the device, install titanium backup, get busybox, let me know what happens bro
Thanks for getting back man. Well I put basically the same post in like 3 threads. So anyway, I ended up basically rerooting it with the tool package from one of the other threads, without using keis. It worked fine, flashed cwm recovery & already on my 3rd rom. First I flashed cm9. But am so used to that on my HTC Evo 4g. Second, flashed the aokp & galaxian soup one. This morning flashed just galaxian soup. Thanks again man.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my PC36100 using Xparent Blue Tapatalk 2
Tab does not go n recovery mode. Black screen instead
I have read the instructions about rooting en installing CWM carefully. The movies are very clear to me.
But....when I restart the Tab with Power and volume - I get the Box with the little Android symbol and the big Android with Downloading Symbol.
I select with volume - the box with little Android and select this with the volume +
The result is that the Tab shuts off instead of going in recovery mode. What am I doing wrong. I have seen this question in some other topics of this forum but never find a good solution.
I already did a factory reset, but that did not help. I am on ANDROID 3.2
Who is willing to help. Thanks
Does this method work if i upgraded to ics via kies?
I wanted to do this with my gf's p7300 but when i choose the recovery the screen stays blank.
Why is that.?
I haven't done anything else with the tab yet only update samsung to 3.2.
Verstuurd van mijn Transformer Prime TF201
No SD card option
Hi,
I just wanted to root my Galaxy Tab 8.9 but don't have the option of SD card in the Android menu. See attached files with screenshots.
On a high note... I tried to flash a custom ROM on Sunday and kinda softbricked the device. After getting it back today from the store I don't want to screw it up again...
Any ideas what I need to do?
Thank you!
sobits said:
Hi,
I just wanted to root my Galaxy Tab 8.9 but don't have the option of SD card in the Android menu. See attached files with screenshots.
On a high note... I tried to flash a custom ROM on Sunday and kinda softbricked the device. After getting it back today from the store I don't want to screw it up again...
Any ideas what I need to do?
Thank you!
Click to expand...
Click to collapse
Seems that you have official 4.0.4 now. You need to install CWM/TWRP before installing root zip.
DemonGloom said:
Seems that you have official 4.0.4 now. You need to install CWM/TWRP before installing root zip.
Click to expand...
Click to collapse
Hi. Thanks for the reply. But how to Flash CWM in the original bootloader when the SD is inaccessible as in the pic? Is there a possibility to flash CWM safely through Odin? Sorry for so many newb questions ; after the softbrick I am overly cautious.
Sent from my GT-P7300 using xda app-developers app

(pt1000)guys,i really need your help.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I try to update this to the new version.But when i already flash the Stock rom,i want to flash again with the kennel 4.00,IT fail!
But i dont know where is the mistake i do ,Can someone in xda please help me to solve this kind of question?I can't connect to my computer,and i want flash this2.3.6 also can't.My rom still 2.3.3 only...
Please someone help me...
can anyone please help me to solve this question and how to upgrade to the newest version?
Arios_tab said:
can anyone please help me to solve this question and how to upgrade to the newest version?
Click to expand...
Click to collapse
P1000 or P1010?
ps: dont worry, i got this simbol on my tab and i restore.
http://forum.xda-developers.com/showthread.php?t=1440924
Do pot post [Q] Question thread in General section.
There is a Q&A section.
samcortez said:
P1000 or P1010?
ps: dont worry, i got this simbol on my tab and i restore.
Click to expand...
Click to collapse
mine one is PT1000.
But can i ask i got this type of symbol is why?then how i cant connect with my computer,i scare later my tab will running out the battery..
priyana said:
http://forum.xda-developers.com/showthread.php?t=1440924
Do pot post [Q] Question thread in General section.
There is a Q&A section.
Click to expand...
Click to collapse
I am sorry because i broken the rule,yet i am scare because my tab cant restore.
Guys,i am really crazy,i try whole day,still cant find solution...
I really never heard of a PT-1000. So it is really a risk to advice you.
But if you haven't and willing to try, try out the method for Overcome 4.1 ROM
it is for P1000 GSM though.
you can head to the Dev section, or directly to www.teamovercome.net
go the guide section, their image is broken, so you can get a cached copy of the guide here:
http://forum.xda-developers.com/showthread.php?p=20974872
Fully charge your tab for 4hrs, just let it plugged in even if no battery icon,
then attemp to flash the GB Stock Safe rom via Odin
If you can then boot it up, then all good.
thank for ur help,i am trying to fix it up.But when i try to charge this,no symbol come out..
no the symbol phone cant connect with computer ,i don't sure is my cable is broken or good?
Sent from my GT-S5360 using XDA
strange. I read that the symbol is just another download mode.
You should be able to connect using Odin.
For charging you just let it plugged to wall charger for long hours, I think.
does the tab charge when you connect it to the computer? if not, you need to try a different cable.
if it does, try reinstalling the drivers
How to say it is charge or not?WHen i plug in to computer,and nothing to show out.I dont know what happen to this,then i want to check also confuse,how check this.
Is that like when we got the symbol,then the tab will show something like the symbol in the picture i post before?
priyana said:
strange. I read that the symbol is just another download mode.
You should be able to connect using Odin.
For charging you just let it plugged to wall charger for long hours, I think.
Click to expand...
Click to collapse
I know that is another download mode,but last time i got try and success to restore back,but this time i dont know what cant connect with my computer.
I've had that symbol before and managed to restore my Tab.
Do you have Odin?
If yes, make sure your Tab is charged - it should charge, you just won't see any progress.
When charged, connect it to your PC. It might not show up in Odin immediately (with the yellow box) but after a bit, if the drivers are there, it should show up.
Then you need to follow the Team Overcome guide and flash the .pit file, the GB Stock .tar and the modem file for your Tab.
If it doesn't show up after a while on Odin, I believe I opened Kies and restored the drivers. I think you can do this even if the Tab is in the state you have it.
Your Tab is soft-bricked, it is recoverable. Read KOsh's thread for reassurance. Good luck!
treb1971 said:
I've had that symbol before and managed to restore my Tab.
Do you have Odin?
If yes, make sure your Tab is charged - it should charge, you just won't see any progress.
When charged, connect it to your PC. It might not show up in Odin immediately (with the yellow box) but after a bit, if the drivers are there, it should show up.
Then you need to follow the Team Overcome guide and flash the .pit file, the GB Stock .tar and the modem file for your Tab.
If it doesn't show up after a while on Odin, I believe I opened Kies and restored the drivers. I think you can do this even if the Tab is in the state you have it.
Your Tab is soft-bricked, it is recoverable. Read KOsh's thread for reassurance. Good luck!
Click to expand...
Click to collapse
LOL.
Hello,my friend.Finally,is the problem of the cable.
huhhuh,I go buy an new one,and connect it,now already can use.And thanks for you all because of you,then i can function my tab again.
ps:What is the rom then can give my tab to the highest performance?
Because i am really dont know how to get a good rom.
Like what trib said, Overcome is a good rom.
Sent from my GT-P1000 using XDA
priyana said:
Like what trib said, Overcome is a good rom.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
But what i still confuse is,i still fail in flash the kernel 4.00...
make sure it is the .tar file not .zip file when you are using Odin to flash Overcome kernel 4.0
It is just a kernel, how could you fail to flash it.
I suspect bad download.
Download again and compare the sha1 checksum.
priyana said:
make sure it is the .tar file not .zip file when you are using Odin to flash Overcome kernel 4.0
It is just a kernel, how could you fail to flash it.
I suspect bad download.
Download again and compare the sha1 checksum.
Click to expand...
Click to collapse
I dont know,but i am download from the link of overcome website.
Am that need bootloader first or root first,just can root and flash the kernel.I saw from the tutorial of http://www.teamovercome.net/ ,there doesn't wrote need root then just can flash the kernel.SO i am confuse...
PS:some of the thought of me when using the 2.3.3 .
I am using the 2.2 froyo before.I feel that when i upgrade,that some place not good then the 2.2,because i am playing the <fruit ninja> and <restaurant story>.I found it is very laggy one,and sometime i am playing the restaurant story and i need to force restart when i just collect the money only.
so i wanna ask what version can be use and run very nice in my tab?
priyana said:
make sure it is the .tar file not .zip file when you are using Odin to flash Overcome kernel 4.0
It is just a kernel, how could you fail to flash it.
I suspect bad download.
Download again and compare the sha1 checksum.
Click to expand...
Click to collapse
I am download complete and right because i am using the link which XDA give.
So got another problem of that?
Why?

ODIN fail, stuck at setupconnection

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the picture of my miserable failure in trying to get "Official" Status. There is a parallel thread here but because i'm not getting any good progress on it, i'm trying to isolate the issue.
So far, i've tried:
Changing cables x3
usb ports x4
reinstalling drivers
killing kies
uninstalling kies
changing computers
disable and re-enable debug
using another copy of kies but still 3.07
punch my dog
none of those have worked, i'm pretty desperate, i really dont know what to do, i've literally spent the last 5 hours working on this, going into other XDA device threads that had people with similar issues, i'm not sure what i can do anymore
My goal is to get official status, i dont care how i get there but i want to be able to have OTAs.
I am willing to bet you are having a drivers issue. Try to completely uninstall anything you have that includes drivers for the phone (Odin, Kies, ADB, and anything else you can think of. The next step will depend on what OS your PC is running as to how you will need to install the proper drivers. I see that you said you tried to reinstall the drivers, but are you sure you deleted ALL copies from your PC before reinstalling and are you sure you are trying to reinstall the correct drivers?
Yes, i am installing the correct drivers (1.5.14.0). Also i have already use a registry cleaner after uninstalling the drivers to make sure i deleted all traces of it.
EDIT: I've also just tried Odin 3.06 with the same result
polish_pat said:
Yes, i am installing the correct drivers (1.5.14.0). Also i have already use a registry cleaner after uninstalling the drivers to make sure i deleted all traces of it.
EDIT: I've also just tried Odin 3.06 with the same result
Click to expand...
Click to collapse
First of all, if you are ever using Odin you should be removing Kies to prevent any conflicts from when the device is connected. Also make sure you have USB Debugging enabled (didn't see you mention that in your original post, so just checking).
polish_pat said:
Yes, i am installing the correct drivers (1.5.14.0). Also i have already use a registry cleaner after uninstalling the drivers to make sure i deleted all traces of it.
EDIT: I've also just tried Odin 3.06 with the same result
Click to expand...
Click to collapse
1.5.23 is the newest drivers, Go download those.
Link for the lazy: http://www.modaco.com/topic/361286-...or-mobile-phones-15230-win-87xp-adb-fastboot/
P.S Uninstall your old drivers BEFORE you install these.
Sobai said:
First of all, if you are ever using Odin you should be removing Kies to prevent any conflicts from when the device is connected. Also make sure you have USB Debugging enabled (didn't see you mention that in your original post, so just checking).
Click to expand...
Click to collapse
i did actually "disable and re-enable debug", and kies is already long gone
i'll try with the newer drivers and report back. Thanks guys
edit: SAME THING DIFFERENT DAY tries with USB_Driver_v1.5.23.0 and it did the exact same thing. I noticed also in the 5 minutes its stuck at setupconnection that my screen was coming on every 30 seconds for about 15 seconds, im sure it has to do with new drivers because it didnt do that before. I dont know why the S4 is giving me such a hard time...i've used odin 20x with my S3 and never had any issues
PPS: I have tried a new computer, the 3rd. My guess is that there might be a problem with the phone, i've tried everything else.
my friend this is 100 percent a driver problem, heres how to get your phone running, go to a friend that doesnt even have a samsung phone
(most likely to have never installed the drivers before) install these drivers
http://ul.to/6yvg703y
then Reboot the PC/Laptop
then use this Odin
http://samsung-updates.com/Odin307.zip
and flash your phone
pm me if it work for you @polish_pat
cabloomi said:
my friend this is 100 percent a driver problem, heres how to get your phone running, go to a friend that doesnt even have a samsung phone
(most likely to have never installed the drivers before) install these drivers
http://ul.to/6yvg703y
then Reboot the PC/Laptop
then use this Odin
http://samsung-updates.com/Odin307.zip
and flash your phone
pm me if it work for you @polish_pat
Click to expand...
Click to collapse
No it's not. I've tried this 50 times already. I tried it on my laptop, i've tried it on a Samsung Series 9 Ultrabook i bought 3 days ago and my dad's Asus All-in-one, the last 2 computers have never even seen a samsung phone connected. It's not a driver problem.
Anyways, like i said in my other thread:
Well, i never solved the ODIN issue, but in any case, i have achieved my goal of getting official status, i had to restore phone by using the stock format function, i then use motochopped to root again and never lost official status while doing all that. I'll leave it at that for today, this gave me a headache
Click to expand...
Click to collapse
=.= is this i337 model from att?
Sent from my SGH-I337M using xda premium
its i337m from Rogers (in canada)
That might sound obvious but are u in download mode?
daraj said:
That might sound obvious but are u in download mode?
Click to expand...
Click to collapse
Yeah OP, just hold Volume Down while booting.
daraj said:
That might sound obvious but are u in download mode?
Click to expand...
Click to collapse
I am sure 100% OP did not on download mode.
I try it and it fail setupconnectio just like OP picture.
---------- Post added at 02:09 AM ---------- Previous post was at 02:01 AM ----------
theo1998 said:
Yeah OP, just hold Volume Down while booting.
Click to expand...
Click to collapse
:good: I learn a new thing, this is easiest way.
Omg. Does anybody have a gun so I can shoot myself? I have no idea how I forgot to do this in download mode. This is so ridiculous. I feel so stupid. I don't understand how I could of forgot I used to do this regularly with my S3. I'm so sorry guys
Sent from my SGH-I337M using Tapatalk 2
Meaning, you got it work now.
You should hit a big THANKS to daraj who point this out :victory:
pakxelaos said:
Meaning, you got it work now.
You should hit a big THANKS to daraj who point this out :victory:
Click to expand...
Click to collapse
Yeah, i did, it didnt solve my issue with official status, even using Mr_Qs motochopper didnt change much, i hope another root method will come out that will be less invasive

[Q] Grand 2 Duos SM-G7106 does not enter download mode

Hello,
A customer gave a Grand 2 (SM-G7106) for service, to have a custom rom & recovery installed.
I've been trying to use the method that's available in all the forums (put the phone to download mode, connect it to odin & etc...).
But the phone does not go into download mode in the first place for some reason.
Rather, when I keep holding Vol Down + Home + Power (or Vol Down + Power only) , a screen flashes to say 'Factory mode' for like 2 secs & then, I get these options
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So, I tried, Vol Up + Power & I get these options
Please give me a solution to this.
Thanking you all in advance,
bro...
which andriod version he izz using??
haneef95 said:
Hello,
A customer gave a Grand 2 (SM-G7106) for service, to have a custom rom & recovery installed.
I've been trying to use the method that's available in all the forums (put the phone to download mode, connect it to odin & etc...).
But the phone does not go into download mode in the first place for some reason.
Rather, when I keep holding Vol Down + Home + Power (or Vol Down + Power only) , a screen flashes to say 'Factory mode' for like 2 secs & then, I get these options
So, I tried, Vol Up + Power & I get these options
Please give me a solution to this.
Thanking you all in advance,
Click to expand...
Click to collapse
I think its not the original set it must high copy so its not going to the download mode .
Andriod version
PKothavale said:
which andriod version he izz using??
Click to expand...
Click to collapse
4.4.X, can't remember what that X was!
kemesh said:
I think its not the original set it must high copy so its not going to the download mode .
Click to expand...
Click to collapse
Not sure, it only came for service.
How do I distinguish between original & duplicate?
Even then, is there any solution to this problem though?
haneef95 said:
Not sure, it only came for service.
How do I distinguish between original & duplicate?
Even then, is there any solution to this problem though?
Click to expand...
Click to collapse
If its an 4.4.X version then u can use balliboxer's new kikat superior rom u can directly insatll it from recovery mode/install a zip...but bro if it doesnt has base of version 4.4.x be aware device can be bricked...
---------- Post added at 11:56 AM ---------- Previous post was at 11:39 AM ----------
PKothavale said:
If its an 4.4.X version then u can use balliboxer's new kikat superior rom u can directly insatll it from recovery mode/install a zip...but bro if it doesnt has base of version 4.4.x be aware device can be bricked...
Click to expand...
Click to collapse
And Be aware if it gets any error dont downgrade it again to 4.3 aware !!! it will make ur device hard brick...
Hey buddies,
I got a 4.3 Samsung SM-G7106, with G7106ZNUANK1 from China Unicom (CHU). unfortunately, I can't root it properly. Tried CF-Root, TowelRoot and Framaroot but no luck.
I hope you can help me out guys, thanks!
May be it is super copy for grand 2,,try to chek with cpu identifier or cpu z,,
Sent from my SM-G7102
Nah, its not a supercopy, just found out that one of my friend was also using the same phone, same specs, same everything and he bought it on Samsung Store in China (He presented me with the copy of the receipt and box stuffs), so yeah, I think its a legit one since its running well on Kies also (unlike other copy phones which can't be detected thru Kies). Anyway, I found a root program from G7106ZNUANC1 and I forgot the other one, its thru SRS root, but didnt work for my phone unfortunately. :crying:
Hope someone could help me root my G7106ZNUANK1 soon!
chopsuey8 said:
Nah, its not a supercopy, just found out that one of my friend was also using the same phone, same specs, same everything and he bought it on Samsung Store in China (He presented me with the copy of the receipt and box stuffs), so yeah, I think its a legit one since its running well on Kies also (unlike other copy phones which can't be detected thru Kies). Anyway, I found a root program from G7106ZNUANC1 and I forgot the other one, its thru SRS root, but didnt work for my phone unfortunately. :crying:
Hope someone could help me root my G7106ZNUANK1 soon!
Click to expand...
Click to collapse
Flash CWM or TWRP through odin..den flash su binaru 2.45 from recovery. su binary 2.45 available in chainfire site.Gud Luck
prakash87 said:
Flash CWM or TWRP through odin..den flash su binaru 2.45 from recovery. su binary 2.45 available in chainfire site.Gud Luck
Click to expand...
Click to collapse
Thanks for the tutorial buddy! Is it possible you can walk me thru it? Even though I'm kinda lurking here for quite some time, still some things are alien to me. I hate to say this, but, can you spoon-feed me the instructions in doing so? Would really appreciate your help!
Thanks! :good:
Hi.
I just got also a Grand 2 G7106, and does the same thing - chinese menus instead of recovery mode. Found a video on youtube that explained which single item does, and most are only a bunch of tests, and one for factory reset, but still with this same issue.
I also would like to know how to use odin without entering in download mode.
sacp said:
Hi.
I just got also a Grand 2 G7106, and does the same thing - chinese menus instead of recovery mode. Found a video on youtube that explained which single item does, and most are only a bunch of tests, and one for factory reset, but still with this same issue.
I also would like to know how to use odin without entering in download mode.
Click to expand...
Click to collapse
Hey buddy, try using SRS root software if you wanted to root your phone. If you're lucky enough that its not the G7106znuank1 model, then it can be rooted thru it. Otherwise, you'll be stuck like me. lol.. good luck! :good:
looks like i am stuck with you guys too. Have the same Samsung SM-G7106 . I tried using ODIN to install CWM. Despite Odin saying that it is PASS and device rebooted itself, when i try to go into recovery mode (CWM) it goes into default Android recovery mode instead with (write protected) ... i tried TWRP too using ODIN and it is not working. Tried both Odin 3.09 and 3.10
If you're still looking for a way to root your SM-G7106, I managed to do it with the KingoRoot app.
super simple process. It's based on Chainfire.
I should mention this was with: G7106znuank1
I have a grand 2 g7106 hard bricked and it is totally dead how to solve this problem please help.
Thanks in advance

VS980 TWRP bootloop after botched lollipop OTA while rooted like a dummy

So yeah. As the title says I had a rooted VS980 on 4.4.2 with some bloat removed and I accidently hit the wrong button when prompted for the upgrade, I was in a hurry. yes, I'm a moron, and yes, I know this is probably wasting someone's valuable time and I thoroughly apologize for my n00bishness
having said that, I have tried to go through various tuts but none of them seem to be working. yes, it's likely that I am simply doing it wrong, but whatever the case I am stuck with my phone in a bootloop always returning to the TWRP recovery. I believe that means it is soft bricked so I'm hoping this can be fixed fairly easily with the right direction and some patience for my ignorance. I can't seem to get it into download mode with turning it off, holding the volume+ button and plugging it in, it just goes to twrp. :'(
my hope is to get a rooted lollipop. if that is not possible then I would be fine with going back to stock or possibly even a custom rom if it's not too awfully complicated. honestly, I'm at a point where I'm beginning to accept that I probably shouldn't be screwing around with it too much and will likely bite the bullet and just keep my phone stock since there are really only a few minor irritants that make me want to root it.
any help is very much appreciated.
anybody? pretty please? any ideas at all?
Deviouz1 said:
anybody? pretty please? any ideas at all?
Click to expand...
Click to collapse
I have the same problem.. take a look at my post in this section... right under yours... I have links posted to the only method to fix it and also a good question that could help you out as well
a.perkins89 said:
I have the same problem.. take a look at my post in this section... right under yours... I have links posted to the only method to fix it and also a good question that could help you out as well
Click to expand...
Click to collapse
actually, it doesn't look to be the same problem. i dont have download mode, but i do have recovery. it boots to twrp like a champ. what i think i really need is how to get the flash file VS98011A_01.zip on my phone via ADB Sideload, specifically when i cant get the drivers to work.
i've tried the following drivers:
LG_VZW_United_WHQL_v2.14.1.exe
LG_VZW_United_WHQL_v2.20.0.exe
LGUnitedMobileDriver_S50MAN310AP22_ML_WHQL_Ver_3.10.1_3.10.1.0
I may very well be mistaken about what needs to happen, i'm no expert, obviously, but from everything ive read any of those should have worked. i think if i can get the right flash on the phone i should be able to flash it via twrp no?
I"ll help
You need to adb sideload xdabbebs download mode restore and flash back to stock. Here is an excellent guide on adb sideloading, download xdabbeb restore download zip and put it where it tells you to. http://forum.xda-developers.com/showthread.php?t=2559200
Jaqueezzzy said:
You need to adb sideload xdabbebs download mode restore and flash back to stock. Here is an excellent guide on adb sideloading, download xdabbeb restore download zip and put it where it tells you to. http://forum.xda-developers.com/showthread.php?t=2559200
Click to expand...
Click to collapse
awesome,thanks you, i'll try that!
Deviouz1 said:
awesome,thanks you, i'll try that!
Click to expand...
Click to collapse
Just so you know it talks about flashing a ROM, but just use the zip you need insted, because it's the same principal.
Step 9 Fails.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i just happened to have a brand new data cable, tried again with same result so its not media related unless there is an issue with the plug itself, but it's charging and the Device manager shows the correct name ie VS980, it just has a yellow bang on it and i cant find a driver that changes that.
read some more and found others with the same issue apparently which led me to here: http://forum.xda-developers.com/showthread.php?t=2715408
which is where i found the "download mode restore" file you mentioned(i didnt see it in the thread you provided), but without the ability to get adb usb command to work i dont see how i can use it.
any ideas?
Put the zip on usb otg and flash it.
_____________________________________Read more write less and be smart
siggey said:
Put the zip on usb otg and flash it.
_____________________________________Read more write less and be smart
Click to expand...
Click to collapse
awesome, ty sir. i happened to have one of those laying around from when i cracked my screen on my old one and couldnt interact with the screen. took a while to find it buried but i have it and i have successfully been able to access a thumb drive. i think that might be all i need.
will report back though regardless.
ok, now i'm rrrrrEEAALLYY freakin confused...
successfully flashed (via the install section of twrp with usb otg thumbdrive mounted.)
xdabbeb_vs98028a_bootstack.zip
and
xdabbeb_vs982.5_1.1.0.zip
from
http://forum.xda-developers.com/verizon-g2/development/xdabbeb-s-vs982-5-v1-0-0-t2975551
but when i reboot, it goes directly to twrp still.
wat? :'(
ok, installed this:
VS980 39A Firmware
from here:
http://forum.xda-developers.com/verizon-g2/development/vs98039a-stock-fw-t3051560
rebooted, went straight to twrp again.
installed
Restore to 100% stock
from the same page.
rebooted. it went into an upgrade screen that errored and then rebooted before i got a chance to write down the error. but when it came back up, it started "android is upgrading".
so it looks like this may have worked. again, will update the success/failure when i know for sure, but thanks for the help yall. i really do appreciate it.
WOO-FREAKIN-HOOOO!!!
at the setup wizard now.
Deviouz1 said:
ok, installed this:
VS980 39A Firmware
from here:
http://forum.xda-developers.com/verizon-g2/development/vs98039a-stock-fw-t3051560
rebooted, went straight to twrp again.
installed
Restore to 100% stock
from the same page.
rebooted. it went into an upgrade screen that errored and then rebooted before i got a chance to write down the error. but when it came back up, it started "android is upgrading".
so it looks like this may have worked. again, will update the success/failure when i know for sure, but thanks for the help yall. i really do appreciate it.
Click to expand...
Click to collapse
Same problem! stupid Ota grrrrr
Your fix worked for me also. Only used the two files listed above and wiped dalvik after flashing both, one after the other with no reboot in between. Many thanks.
thecadman99 said:
Same problem! stupid Ota grrrrr
Your fix worked for me also. Only used the two files listed above and wiped dalvik after flashing both, one after the other with no reboot in between. Many thanks.
Click to expand...
Click to collapse
sweet, i'm glad someone else found it useful.
Yep, now another problem though. ..no mobile data. .. working on it.
I'd suggest flashing the files in post 12 (I didn't and am having TONS of problems)
So I really didn't get a fix- still working on it.
I have no download mode, and not way to get the serial port to display in device manager, so the LG Mobile support tool won't see my phone....
thecadman99 said:
Yep, now another problem though. ..no mobile data. .. working on it.
I'd suggest flashing the files in post 12 (I didn't and am having TONS of problems)
So I really didn't get a fix- still working on it.
I have no download mode, and not way to get the serial port to display in device manager, so the LG Mobile support tool won't see my phone....
Click to expand...
Click to collapse
Is your baseband recognized by chance?
Deviouz1 said:
Is your baseband recognized by chance?
Click to expand...
Click to collapse
Nope... its UNKNOWN
And I have not download mode
And I have not cdc serial showing up when connected
And TWRP and Root are gone
I'm starting a new thread for help- I've been working on this for 2 days lol.
Thanks for the reply!

Categories

Resources