Database Users

Error Firmware

Hello,
I downloaded the latest firmware for P6800 "P6800XXLB4 3.2 P6800XEFLC1 France February 2012"
I made a flash with odin and now I have an error message
"Encountered year after firmware upgrade, please select kies in recovery mode and try again".
With odin I always "Failed" ...
how do I do now?
Best regard

Press and hold the Volume UP+Power button until a recovery mode screen appears, and do wipe data/factory reset

biopsin said:
Press and hold the Volume UP+Power button until a recovery mode screen appears, and do wipe data/factory reset
Click to expand...
Click to collapse
Thank you for your response!
But I can not, if I do this I get the firmware upgrade encountered an issue, please select recovery mode in kies and try again or volume down mode Odin that's all.

damien92220 said:
Thank you for your response!
But I can not, if I do this I get the firmware upgrade encountered an issue, please select recovery mode in kies and try again or volume down mode Odin that's all.
Click to expand...
Click to collapse
You shouldn't have to do a factory reset when flashing with odin. Odin wipes the whole drive and flashes from scratch-- it may not wipe the partition table or individual partitions, but it at least reformats each partition as if it were new. I'd recommend rolling back to your original firmware.
Sent from my GT-P6800 using XDA Premium HD app

Hello,
I can not put the original firmware with Odin that I tested 5 firmware.
<ID:0/019> Added!!
<ID:0/019> Removed!!
<ID:0/019> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6800XXLC3_P6800DRELB1_P6800XXLA3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/019> Odin v.3 engine (ID:19)..
<ID:0/019> File analysis..
<ID:0/019> SetupConnection..
<ID:0/019> Initialzation..
<ID:0/019> Get PIT for mapping..
<ID:0/019> Firmware update start..
<ID:0/019> boot.bin
<ID:0/019> NAND Write Start!!
<ID:0/019>
<ID:0/019> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

damien92220 said:
Hello,
I can not put the original firmware with Odin that I tested 5 firmware.
<ID:0/019> Added!!
<ID:0/019> Removed!!
<ID:0/019> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6800XXLC3_P6800DRELB1_P6800XXLA3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/019> Odin v.3 engine (ID:19)..
<ID:0/019> File analysis..
<ID:0/019> SetupConnection..
<ID:0/019> Initialzation..
<ID:0/019> Get PIT for mapping..
<ID:0/019> Firmware update start..
<ID:0/019> boot.bin
<ID:0/019> NAND Write Start!!
<ID:0/019>
<ID:0/019> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
ICS IS OUT!!! See if that helps!
Sent from my GT-P6800 using XDA Premium HD app

Same here...
Hello all,
I added a screen dump. First time I tried to flash with the update in the CSC option... I downloaded the file and the G6800 Odin package from Sammobile. Before to go to sleep quickly tried to upgrade but then I messed things up.
I tried various modes. Can someone help me?
Thanks!

Please try to read the instructions for Odin...
http://forum.xda-developers.com/showthread.php?t=1469635
I'll quote the relevant part for you because you missed it somehow:
xenix96 said:
PLEASE DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION.
Click to expand...
Click to collapse
If it's already been written and it's not the right one you'll need to find a valid pit file for your model of Tab (P6800 or P6810) to fix it. You'll have to search for it though, I don't know where to find them.

solution
I have this problem yesterday, so I work out via google search.
After a while I discovered that I had used a wrong PIT file ... So the correct downloaded flashed and ready
See attachment for the right PIT

Thanks for the solution!
Co_OL 1977 said:
I have this problem yesterday, so I work out via google search.
After a while I discovered that I had used a wrong PIT file ... So the correct downloaded flashed and ready
See attachment for the right PIT
Click to expand...
Click to collapse
Could you please attach the required PIT file? It is not in your message! En bedankt voor de oplossing!!!

PIT File
Lol not uploaded

Settings
Co_OL 1977 said:
Lol not uploaded
Click to expand...
Click to collapse
Can you tell me exactly which settings were used in Odin? This was while flashing the new ICS software right?
(before I make another stupid choice...)

woevanda said:
Can you tell me exactly which settings were used in Odin? This was while flashing the new ICS software right?
(before I make another stupid choice...)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1469635
It explains everything here, evwn how to flash a pit file, and which boxes to check and such.

same problem..help needed asap..thanks

Succeeded!
Co_OL 1977 said:
Lol not uploaded
Click to expand...
Click to collapse
My 7.7 is now running on Android 4.04. Thanks!!!

Man I hit the same issue. Got stuck in the kies recovery screen while upgrading to ICS.
Can someone please provide clear instructions getting out of that? Thank you so much!
Note: download mode and flashing through odin does not get me further than factorfs. =_=
CRAP. Now my battery died. Won't even charge or turn on.

krazykat said:
Man I hit the same issue. Got stuck in the kies recovery screen while upgrading to ICS.
Can someone please provide clear instructions getting out of that? Thank you so much!
Note: download mode and flashing through odin does not get me further than factorfs. =_=
CRAP. Now my battery died. Won't even charge or turn on.
Click to expand...
Click to collapse
See my post about the pit file :cyclops:
And you must have your tablet at least for 10 min on your charger before you can turn on or you can see he is charging
Quote from repair factory:
If your battery is completely discharged, the ten minutes before you see that your device is loaded.
Click to expand...
Click to collapse

Co_OL 1977 said:
See my post about the pit file :cyclops:
And you must have your tablet at least for 10 min on your charger before you can turn on or you can see he is charging
Quote from repair factory:
Click to expand...
Click to collapse
Yup I did thanks. Though - after flashing pit with re-partition, flashing ICS won't seem to go anywhere.
What firmware did u flash it with after pit?

krazykat said:
Yup I did thanks. Though - after flashing pit with re-partition, flashing ICS won't seem to go anywhere.
What firmware did u flash it with after pit?
Click to expand...
Click to collapse
i'm having the same problem with my tab 7.7, can someone guide us through this. I already followed the instructions from the guide of flashing rom but none of this work. TIA.

Thank you...
Co_OL 1977 said:
Lol not uploaded
Click to expand...
Click to collapse
I also experienced the error when doing the update to ICS recently and spent long hours trying to figure out and checking forums.
I tried the PIT file attached by "CL 1977" and it worked like a charm. :good:
Now running ICS 4.0.4. :fingers-crossed:

Help my gt-i9505 stocked on samsung logo..

i will tell all the information here..i have my samsung gt-i9505 carrier locked to globe telecom here in the philippines..
i tried to factory unlock here http://forum.xda-developers.com/showthread.php?t=2282683 but i have no luck on it..i have change my baseband several time via odin but still i pin request always shows after i reboot..i have android version 4.2.2, stock firmware DXUBMF8.
so i stopped from there..i moved on to try to root my s4,before having this phone i had owned a s4 factory unlock and i have had rooted it but i already forgot how to do it again..so started anew by looking again at forum threads,i have tried omega custom rom but if i goes to recovery mode my screen only shows the following options: reboot system now, apply update from ADB, apply update from external storage, wipe data/factory reset, wipe cache partition, apply update cache..my question here was,is this the default recovery mode of s4 now?because i can still recall that my last s4's default recovery menu shows with advance option with wipe dalvik cache etc..and my recovery menu now shows no apply update from internal storage..when i tried flashing the custom rom save on my sd card: apply update>omega*something*.zip..it all well done but after rebooting my phone didn't any stuff from that custom rom nor rooted at all..can you help me solving this?
and lastly this is my main problem now,i searched again the thread and went down to this thread http://forum.xda-developers.com/showthread.php?t=2250824 i downloaded the pre-rooted rom XXUBMF8..flashed it with odin PDA..passed and from then my phone was stocked every time i reboot to samsung logo..
i have tried to flash again on a stocked rom. odin>PHONE>(the stock rom)>start>passed then reboot it still stocked to samsung logo..
sorry this was too long to read but i have to tell what all i have been done resulting to this..can someone help me..i will be very thanful for your help..

can anyone help me with this?i have been searching the forum for hours..i have done flashing through odin with stock rom and pit file but it ended up failed..done factory reset with default recovery mode but nothing happens still stucked on boot logo..

still no luck.. it was almost 24 hours since my phone bricked..can someone kindly help me.

voidjov said:
still no luck.. it was almost 24 hours since my phone bricked..can someone kindly help me.
Click to expand...
Click to collapse
The recovery your talking about is cwm not default s4 recovery you'll find that recovery here
http://forum.xda-developers.com/showthread.php?t=2281367
After its installed try wiping data then cache then going into advanced and wiping dalvik cache
S4 Info

did you try from the stock rom to go to recovery many and wipe to factory default again...
Have you tried to install a recovery like Philz and see if you can access the file system of your GS4.
You'll also find more wiping option
Edit: oh great some1 posted before me.
also try to do it from your official rom

TingTingin said:
The recovery your talking about is cwm not default s4 recovery you'll find that recovery here
http://forum.xda-developers.com/showthread.php?t=2281367
After its installed try wiping data then cache then going into advanced and wiping dalvik cache
S4 Info
Click to expand...
Click to collapse
no it was stock recovery what i have used not cwm i think..thats the problem because i am used to using cwm that's where all my problem started because i used stock recovery instead which i am not so familiar.
daibaron said:
did you try from the stock rom to go to recovery many and wipe to factory default again...
Have you tried to install a recovery like Philz and see if you can access the file system of your GS4.
You'll also find more wiping option
Edit: oh great some1 posted before me.
also try to do it from your official rom
Click to expand...
Click to collapse
i have read philz thread and tried flash the .tar file with PDA odin but an error shows:
odin failed once again after flashing a stock rom, the error was:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Removed!!
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
no im on a screen shows firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.,
now i cant go even on a stock recovery but i can do download/odin mode..i will not do any further steps from now on,i will wait for your help guys,i don;t want to pay to unbricked my s4,i have to fix it all by myself and your kind help guys..

voidjov said:
no it was stock recovery what i have used not cwm i think..thats the problem because i am used to using cwm that's where all my problem started because i used stock recovery instead which i am not so familiar.
i have read philz thread and tried flash the .tar file with PDA odin but an error shows:
odin failed once again after flashing a stock rom, the error was:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Removed!!
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
no im on a screen shows firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.,
now i cant go even on a stock recovery but i can do download/odin mode..i will not do any further steps from now on,i will wait for your help guys,i don;t want to pay to unbricked my s4,i have to fix it all by myself and your kind help guys..
Click to expand...
Click to collapse
In the Thread you point out... read AGAIN about PIT
http://forum.xda-developers.com/showthread.php?t=2265477
Download the PIT and follow the exact procedure... it's not like flashing a new firmware so read which boxes you check
Try the PIT file with / without the firmware
check also this thread... in case you have a pit related error.
http://forum.xda-developers.com/showthread.php?t=2283919
I'm sure you have all you need to recover your phone.
When you will have recovered your phone, update this thread saying you solved your problem.
check also this thread... in case you have a pit related error.
OH, don't forget to update my thanks counter

Hello,
I saw an answer to this problem in another thread. You have to swipe the phone by starting it with VOLUME UP + HOME + POWER, and then whatever options you have to swipe everything.

Problem SOLVED!!!
hey guys i have solved my greatest problem since i started rooting back on my N7100,my 1st s4 and now my new s4..
thank you for all who helped me,after more than 24hours of reading and waiting for you replies and doing some intervention on my s4,i have recover it..i will post here how i did it for reference for others who might encounter this problem same as mine:
first of all i have noticed this just after successfully revived my phone, you have to WIPE THE DATA/FACTORY REFORMAT via recovery mode before and after doing any firmware update,then i just removed my battery may be a minute and put it back again every time i do flashing..
i used odin version 1.85 not version 3.04..i first chose the pit file and flash it.(when i tried flashing the pit and stock rom together it always ended up to fail)..so i decided to chose to flash the pit file only using odin v1.85(it automatically ticked the "repartition option on this odin version" then it passed..after that as i have said remove battery,wipe data,then i removed again the battery,then put it back and do download/odin mode on my phone,then i flashed stock rom from www.sammoble.com, i searched for globe carrier since my phone was locked on that carrier, then after 2-3minutes(be patient and don't do anything while waiting) my phone backed to life!!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMF8_I9505OLBBMF8_I9505DXUBMF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> NON-HLOS.bin
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
for those guys who helped me, i have pressed the thanks button for you guys 100x(i hope i can do that)..but truly i am very much thankful for you guys..i do not have to go to service provider technician or any cellphone repair stall just to repair my phone and pay,i have revived it with your help..THANK YOU!!!
i must add i would like to ask what is the best way to root my phone, i have read chainfire autoroot, is the best way to root my phone?as i can remember it is the same way i have rooted my first s4 two months ago because i saw my old folder here on my pc with that application..and best custom rom?
and the best way to factory unlock my phone, the working firmware..
you can post the link so i can read and do it myself..

The end of my S4? (Brick/dead) - Help..

Hi guys, long time lurker here anyway i've always flashed my S4 with odin and not a single problem always flashed STOCK firmwares
but today i recently discovered a new firmware on the list for the GT-I9500 Exynos Octa (version) - this firmware to be in fact I9500ZNUCMI1
but now its bombed... it hanged and hanged at booting for 20 min then it shut it self off turned it back on 'the firmware encounter a problem' message popped up... i cannot go into recovery mode AT ALL (just download mode) so i thought i will flash my previous stock firmware known as I9500XXUBMG9 but now i cant even do that..... odin just gives me a god damn fail - FOR THE LOVE OF ANDROID HELP ME
- Kies is not running in the background
- USB connections are fine
- Cables are fine
So do i have to fear this is the end ? lol i cannot believe this happened to me on a STOCK firmware.... (lucky for me... all my stuff is backed up on sd)
Any help would be greatly appreciated

lethcore said:
Hi guys, long time lurker here anyway i've always flashed my S4 with odin and not a single problem always flashed STOCK firmwares
but today i recently discovered a new firmware on the list for the GT-I9500 Exynos Octa (version) - this firmware to be in fact I9500ZNUCMI1
but now its bombed... it hanged and hanged at booting for 20 min then it shut it self off turned it back on 'the firmware encounter a problem' message popped up... i cannot go into recovery mode AT ALL (just download mode) so i thought i will flash my previous stock firmware known as I9500XXUBMG9 but now i cant even do that..... odin just gives me a god damn fail - FOR THE LOVE OF ANDROID HELP ME
- Kies is not running in the background
- USB connections are fine
- Cables are fine
So do i have to fear this is the end ? lol i cannot believe this happened to me on a STOCK firmware.... (lucky for me... all my stuff is backed up on sd)
Any help would be greatly appreciated
Click to expand...
Click to collapse
If you can get into Download mode, all hope is not lost. Uninstall and resinstall drivers, Odin, etc. reboot.
Odin back to stock, immediately boot into stock recovery, wipe data, reboot.
Done.

donalgodon said:
If you can get into Download mode, all hope is not lost. Uninstall and resinstall drivers, Odin, etc. reboot.
Odin back to stock, immediately boot into stock recovery, wipe data, reboot.
Done.
Click to expand...
Click to collapse
Thx for reply
Still says FAIL when i try to flash I9500XXUBMG9 what am i doing wrong ?
rebooted laptop twice plug in S4 via usb says unknown device when in download mode but odin reconise it flash it and nothing happens on the screen then i get the big fat RED FAIL ............... AHHH

lethcore said:
Thx for reply
Still says FAIL when i try to flash I9500XXUBMG9 what am i doing wrong ?
rebooted laptop twice plug in S4 via usb says unknown device when in download mode but odin reconise it flash it and nothing happens on the screen then i get the big fat RED FAIL ............... AHHH
Click to expand...
Click to collapse
The good news is that Download mode is still working. AS long as that's the case, you can get it back. Just keep trying. Switch PCs, switch cables, switch ports, re download a different stock ROM, etc. do whatever it takes to try every variable you can think of.
Eventually, you'll find what's causing it and the ROM will flash successfully. When that happens, get immediately into recovery and wipe data.
(Remove the battery after it flashes, but it back in and hold vol-up+home+power.)
After the data wipe....
Reboot.
Like I said, Download mode means you can find a way to flash, but working with Odin to resolve these issues can sometimes be a PITA. I've had the same thing myself before. Just don't give up. Try to stay calm, and work your way through it. You'll get it eventually.
Edit: Just noticed that you flashed a CHINA firmware. (Why? ) You may be facing this issue because (I think) they use a different pit. There's a thread devoted to resurrecting the device with pit. Maybe check it out.

lethcore said:
Thx for reply
Still says FAIL when i try to flash I9500XXUBMG9 what am i doing wrong ?
rebooted laptop twice plug in S4 via usb says unknown device when in download mode but odin reconise it flash it and nothing happens on the screen then i get the big fat RED FAIL ............... AHHH
Click to expand...
Click to collapse
dont flash China or Hong kong firmwares.
please post odin progression

samersh72 said:
dont flash China or Hong kong firmwares.
please post odin progression
Click to expand...
Click to collapse
Nothing to post just says 'completed' but its failed.... i'll remember this next time stay away from china/hong kong firmwares...
im still tyring now and will let you guys/girls know how it pans out! wish me luck!

lethcore said:
Nothing to post just says 'completed' but its failed.... i'll remember this next time stay away from china/hong kong firmwares...
im still tyring now and will let you guys/girls know how it pans out! wish me luck!
Click to expand...
Click to collapse
INFO HERE
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUBMG9_I9500OJVBMG9_I9500XXUBMG9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> param.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> persdata.img
<ID:0/005> system.img
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)

lethcore said:
INFO HERE
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUBMG9_I9500OJVBMG9_I9500XXUBMG9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> param.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> persdata.img
<ID:0/005> system.img
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
recovery is flashed, try to boot into it and make the wipe then re-flash stock, re-wipe.
if not, flash a custom recovery, format system, cache, re-flash stock, re-wipe

@donalgodon
Why ? well i got the I9500 in hong kong (im actually based in china now) (not Chinese though) thought i'll see some nice changes? but seems i fK'ed the phone.... pit? i haven't a clue man pit number? think i've KILLED HER... lol (i never knew the dangers of Chinese firmware) - wont be going down that route again.

@samersh72
Are you sure? i cannot get into 'recover' mode... the phone just hands at 'Firmware upgrade encounted an issue please select kies & try again
i canm only enter download mode.... when i try to enter recover mode it just flashes at the firmware message.

lethcore said:
@samersh72
Are you sure? i cannot get into 'recover' mode... the phone just hands at 'Firmware upgrade encounted an issue please select kies & try again
i canm only enter download mode.... when i try to enter recover mode it just flashes at the firmware message.
Click to expand...
Click to collapse
flash custom recovery,
if not see my signature for flashing right pit with the firmware

samersh72 said:
flash custom recovery,
if not see my signature for flashing right pit with the firmware
Click to expand...
Click to collapse
Well i just grabbed a I9500 pit file and have my stock firmware just add these 2 to odin and click start? that simple or ??

lethcore said:
Well i just grabbed a I9500 pit file and have my stock firmware just add these 2 to odin and click start? that simple or ??
Click to expand...
Click to collapse
yes, make sure that you are using the right pit, put it in "pit" window in odin, and the firmware in "pda", make sure "re-partition" is ticked, start.

samersh72 said:
yes, make sure that you are using the right pit, put it in "pit" window in odin, and the firmware in "pda", make sure "re-partition" is ticked, start.
Click to expand...
Click to collapse
Well you be happy to know
installed the previous firmware and that pit file for I9500 from your sig and everything seems well... booted correctly nothing lost all seems good to early to tell but will keep you informed !
THANK YOU!!!

S4 I9500 Bricked while installing rom...

Hi, I had my S4 with stock rom 4.3 with adam kernel and philz touch recovery, tried to install via odin the stock rom 4.4.2 TTT but because of a CPU problem the usb connection was interrupted while installing. Now I'm stuck at download mode.
Here's details.
Download mode:
ODIN MODE
PRODUCT NAME: GT-I9500
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
RP SWREV: A3
After attempting install rom via odin:
appears the same in download mode plus this line:
SW REV. CHECK FAIL. DEVICE:-3, BINARY:2
Odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've already tried the same with the PIT file but still doesn't work, anybody got a clue?

Anybody? I need my phone back :S

chemell said:
Anybody? I need my phone back :S
Click to expand...
Click to collapse
Odin was interrupted at the bootloader update (sboot.bin). You need the "factory ROM" to flash it, however I am not aware if anything for 4.2.2 would be available for now.

spamtrash said:
Odin was interrupted at the bootloader update (sboot.bin). You need the "factory ROM" to flash it, however I am not aware if anything for 4.2.2 would be available for now.
Click to expand...
Click to collapse
But can I use another rom? I don't care if isn't a 4.2.2 rom because I need the phone again doesn't matter with which rom or android version.

If u can boot to recovery flash a custom rom then flash stock via odin

aayushkhajuria2842 said:
If u can boot to recovery flash a custom rom then flash stock via odin
Click to expand...
Click to collapse
I can't, I only got download mode...

Try the right key combination .....its nt possible that you can have download mode but nt recovery
Press and hold Volume Up, Home and Power

aayushkhajuria2842 said:
Try the right key combination .....its nt possible that you can have download mode but nt recovery
Press and hold Volume Up, Home and Power
Click to expand...
Click to collapse
Well it doesn't work, when I turn on the phone a black screen with a cellphone, a warning sign and a monitor appears and a text says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
With this screen I can only go into download mode but when I try recovery mode it just puts the screen black and back to the same text and pictures.
Another thing that worries me it's that I can't turn the phone off with the button, only if I pull the battery out.

This can be recovered I had same prblm some months ago bt I just flashed stock firmware nd it was fixed u may try flashing stock rom again

aayushkhajuria2842 said:
This can be recovered I had same prblm some months ago bt I just flashed stock firmware nd it was fixed u may try flashing stock rom again
Click to expand...
Click to collapse
I've already tried with the rom "I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5" (I believe it's stock rom) and get the odin error that appears in my first post...

Try some other firmware of you own region ......... 4.3 or 4.4 whichever u have for your region .......I think then u will nt get same error

chemell said:
Hi, I had my S4 with stock rom 4.3 with adam kernel and philz touch recovery, tried to install via odin the stock rom 4.4.2 TTT but because of a CPU problem the usb connection was interrupted while installing. Now I'm stuck at download mode.
Here's details.
Download mode:
ODIN MODE
PRODUCT NAME: GT-I9500
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
RP SWREV: A3
After attempting install rom via odin:
appears the same in download mode plus this line:
SW REV. CHECK FAIL. DEVICE:-3, BINARY:2
Odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've already tried the same with the PIT file but still doesn't work, anybody got a clue?
Click to expand...
Click to collapse
Hi, try to flash through kies emergency firmware recovery.

navdeepavi said:
Hi, try to flash through kies emergency firmware recovery.
Click to expand...
Click to collapse
Hi, I tried, but in Kies I can't get trough the "Connecting..." status so when I choose "Emergency firmware recovery" the list of devices appears empty.

I think u should try flashing some other stock firmware I hav had the prblm before

aayushkhajuria2842 said:
I think u should try flashing some other stock firmware I hav had the prblm before
Click to expand...
Click to collapse
Hi, I'm downloading another firmware now. But I don't think it will work, i've tried with a pack I found (firmware+pit+booloader+cp+csc) and didn't work. Also I tried just flashing only de BP file and keep getting the same error:
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
I don't know what to do but I'm downloading an ARO stock firmware (4.3) and I'll try...

It should work I did the same thing but cant say anything

aayushkhajuria2842 said:
I think u should try flashing some other stock firmware I hav had the prblm before
Click to expand...
Click to collapse
Obviously not. simple flash of ROM is not sorting out the corrupted bootloader problem.
---------- Post added at 07:52 AM ---------- Previous post was at 07:45 AM ----------
chemell said:
Hi, I'm downloading another firmware now. But I don't think it will work, i've tried with a pack I found (firmware+pit+booloader+cp+csc) and didn't work. Also I tried just flashing only de BP file and keep getting the same error:
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
I don't know what to do but I'm downloading an ARO stock firmware (4.3) and I'll try...
Click to expand...
Click to collapse
considering your situation, I doubt if it will work. you have to pick from two scenarios:
a) your download mode shows warranty void, knox void, custom: then you have to go to step 2 below.
b) your download mode shows all statuses samsung or official or 0x0 - then go to 1
1. Call samsung service center, they shall sort it out under the warranty.
2. More complicated, if you do not want to pay for repairs.
DELETED, procedure was for I9505 ONLY
you have to follow the procedure form this link instead.
Good luck.

spamtrash said:
Obviously not. simple flash of ROM is not sorting out the corrupted bootloader problem.
---------- Post added at 07:52 AM ---------- Previous post was at 07:45 AM ----------
considering your situation, I doubt if it will work. you have to pick from two scenarios:
a) your download mode shows warranty void, knox void, custom: then you have to go to step 2 below.
b) your download mode shows all statuses samsung or official or 0x0 - then go to 1
1. Call samsung service center, they shall sort it out under the warranty.
2. More complicated, if you do not want to pay for repairs.
You will need the PC with not faulty CPU, first.
Then, you have to use the PIT from here
Of course, you will need the Qualcomm drivers as well, from here or this one
Then, you have to follow the relatively simple procedure described here
That shall fix the corrupted bootloader, and I hope that you will not see the described there errors which would point to the hardware problem.
Good luck.
Click to expand...
Click to collapse
Warning!
He said he is in trouble with a I9500 device, so the Qualcomm drivers will not help....much.

Just an observation, you said you have no recovery right? So have you tried just flashing the tar of PhilZ recovery using Odin to get it back?
At least then you'll have a recovery again and can move forward with a custom ROM install
Sent from my GT-I9505 using XDA Premium HD app

lolo9393 said:
Warning!
He said he is in trouble with a I9500 device, so the Qualcomm drivers will not help....much.
Click to expand...
Click to collapse
right. the correct one provided.

PIT File for SM-N910X LIve Demo Unit Note 4

Hello everyone, i have a Note 4 Live Demo Unit with a corrupted Data partition :crying: Anyone knows where i can find the PIT File for the N910X ?
Greetings

mv-testarossa said:
Hello everyone, i have a Note 4 Live Demo Unit with a corrupted Data partition :crying: Anyone knows where i can find the PIT File for the N910X ?
Greetings
Click to expand...
Click to collapse
Does it work fine before? I mean can it register to the mobile network?
I doubt it doesn't as it is a demo unit.

mv-testarossa said:
Hello everyone, i have a Note 4 Live Demo Unit with a corrupted Data partition :crying: Anyone knows where i can find the PIT File for the N910X ?
Greetings
Click to expand...
Click to collapse
Demo units (N910X) are NOT sold to public...!

vndnguyen said:
Does it work fine before? I mean can it register to the mobile network?
I doubt it doesn't as it is a demo unit.
Click to expand...
Click to collapse
It worked fine until i flashed a pit file for the N910F, and since then, the phone stuck at the Samsung Logo, and i cant do a factory reset, it alsways says: E: Data cannot moount.

mv-testarossa said:
It worked fine until i flashed a pit file for the N910F, and since then, the phone stuck at the Samsung Logo, and i cant do a factory reset, it alsways says: E: Data cannot moount.
Click to expand...
Click to collapse
As this model is not widely available public, it is hard to ask for a PIT file.
You can try to flash the N910F firmware again with the N910F PIT file.
Would you mind showing me the info (screenshots) from your device using Phone INFO ★Samsung★ app? I'm very grateful.

I flashed N910F Firmware several times before, didnt help. I cant do a screenshot because the phone stuck at the samsung logo.
is there any other way to recover the data partition ?

mv-testarossa said:
I flashed N910F Firmware several times before, didnt help. I cant do a screenshot because the phone stuck at the samsung logo.
is there any other way to recover the data partition ?
Click to expand...
Click to collapse
Did you use a correct firmware file + correct PIT file for N910F?
And did you tick the Re-Partition option?
What was the error message in the Odin? Can you post the full Odin log here?

vndnguyen said:
Did you use a correct firmware file + correct PIT file for N910F?
And did you tick the Re-Partition option?
What was the error message in the Odin? Can you post the full Odin log here?
Click to expand...
Click to collapse
I dont get any errors on odin, and yes, i also tick re-partition.
I currently have 2 Firmware Files for N910F but only 1 Pit File
that i could found in the whole Internet. Which Pit File do i need ?
I hope anyone can help me bringing the device back to life

Can you post full Odin log while you were flashing the firmware?

Best solution:
Go to a Samsung Service Center: they can repair your phone!
And once again: 910X (demo units) are NOT sold to public!

Thats the full Odin Log.
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910FXXU1ANIE_N910FVFG1ANI7_N910FXXU1ANIE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> tz.mbn
<ID:0/008> sdi.mbn
<ID:0/008> NON-HLOS.bin
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img.ext4
<ID:0/008> modem.bin
<ID:0/008> cache.img.ext4
<ID:0/008> hidden.img.ext4
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!

I've solved the problem by flashing the StockROM for N910F again through Odin. Thanks to all they helped me

mv-testarossa said:
I've solved the problem by flashing the StockROM again through Odin. Thanks to all they helped me
Click to expand...
Click to collapse
Do you have the Stock Rom for the N910X?

Yes but it is only a PhilZ Recovery Backup, i can upload it to my MEGA Account if you want it. Buildnumber is N910XXXU1ANJ2_LLK. Maybe there a some Files from me inside the ROM, please delete them immediately.
On my Demo Unit, i just flashed the Stock ROM for N910F (N910FXXU1ANJ4). Works great.

mv-testarossa said:
I've solved the problem by flashing the StockROM again through Odin. Thanks to all they helped me
Click to expand...
Click to collapse
I am also looking for StockROM too ...

shebi said:
I am also looking for StockROM too ...
Click to expand...
Click to collapse
I used the Rom for N910F. I have a PhilZ Recovery Backup of the N910X Rom, i can upload it if anybody need it.

mv-testarossa said:
I used the Rom for N910F. I have a PhilZ Recovery Backup of the N910X Rom, i can upload it if anybody need it.
Click to expand...
Click to collapse
Now that you flashed n910f ROM, do you able to use cellular connection? or it is still WiFi only?

No, it is still Wifi only, you cant use cellular because live Demos dont have a IMEI.

Flash SuperSu and Flashable Busybox (attached below)
then
use adb
adb shell
mke2fs / dev/block/mmcblk0p27
mount-w-t ext4 / dev/block/mmcblk0p27 / data
Click to expand...
Click to collapse

Device is already back to life, but thanks anyway for your response.