Database Users

TouchFlo 3D Vodafone Blue, Yellow & BlackTheme

No fancy change, only color change from "Red" to "Blue","Yellow" & "Black".
Include the "Communication" Tab.
Thanks to sushilange for the "Manila editor" program and the "Vodafone Red" theme.
1. You need Winzip to unzip 2 Winrar files in it. Then use Winrar to further unzip the rar files to get the theme file.
2. Save Vodafone theme into your diamond folder "internal memory/Themes"
3. Use "Diamond TF3D Config V0.67" and select the Vodafone theme.
4. Once complete change over, do a reset.
5. Enjoy!

Thx. It is great...

great looking
it's great .......... a depart from the regular red/white Vodafone theme.
It would be interesting to have it in purple, orange, green ...........

Doesn't work for me. Got something like that:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any clues?

me too, all messed up on mine
the bottom icons are off center unlike the screenshot....?

tepss said:
Doesn't work for me. Got something like that:
Click to expand...
Click to collapse
I have same problem...

Let me recall....i remember i ever come across tis problem.
Try try the following if you have the "Vodafone Red.theme":
1. Save "Vodafone Red.theme" into your diamond folder "internal memory/Themes"
2. Use "Diamond TF3D Config V0.67" and select the "Vodafone Red" theme.
3. Once complete change over, do a reset.
4. Once rebooted, copy all files in "Vodafone Blue.zip" file into "Windows" folder.
4. Reset & done.
I had also created "Vodafone Blue.theme" for use wif "Diamond TF3D Config V0.67".
I tried to upload the files but keep failing, don't know why.
Will try again tomorow.

d190610 said:
Let me recall....i remember i ever come across tis problem.
Try try the following if you have the "Vodafone Red.theme":
1. Save "Vodafone Red.theme" into your diamond folder "internal memory/Themes"
2. Use "Diamond TF3D Config V0.67" and select the "Vodafone Red" theme.
3. Once complete change over, do a reset.
4. Once rebooted, copy all files in "Vodafone Blue.zip" file into "Windows" folder.
4. Reset & done.
I had also created "Vodafone Blue.theme" for use wif "Diamond TF3D Config V0.67".
I tried to upload the files but keep failing, don't know why.
Will try again tomorow.
Click to expand...
Click to collapse
May I know how to create .theme files?

Successfully uploaded the theme file in post #1.
The zip file consist of 2 rar files. After unzip, you need to use winrar to unzip further to theme file.
1. Save "Vodafone Blue.theme" into your diamond folder "internal memory/Themes"
2. Use "Diamond TF3D Config V0.67" and select the "Vodafone Blue" theme.
3. Once complete change over, do a reset.
4. Enjoy!

henrychenghkg said:
May I know how to create .theme files?
Click to expand...
Click to collapse
I'm using winzip to open the theme file. Modify the manila files in it and move the modified file back into the theme file.

Themes updated. See Post #1.

Crash
Hey,
My Diamond TF3D Config keeps on crashing as soon as i select the theme in the drop down menu, click apply and press start. I tried another theme and that one does work. Does anyone know how to fix this problem?
It says Diamond TF3D Config has an unexpected error and needs to be closed saying "Wrong Central Directory signature"

is it possible in black ?? i loveee this theeemee thXXXX v muchh

grld said:
Hey,
My Diamond TF3D Config keeps on crashing as soon as i select the theme in the drop down menu, click apply and press start. I tried another theme and that one does work. Does anyone know how to fix this problem?
It says Diamond TF3D Config V0.6.7 has an unexpected error and needs to be closed saying "Wrong Central Directory signature"
Click to expand...
Click to collapse
Not sure wat happen. I tried on my diamond using TF3D Config with no problem.
Here's another way you can change the theme:
1. Use winzip to open the theme file.
2. Extract all manila files in it to your diamond 'Window' directory.
3. When prompt to overwrite, click 'yes'.
4. Once copy completed, soft reset your diamond.
5. Done.
**Note: Always perform backup before make any changes. Use at your own risk.

badrey said:
is it possible in black ?? i loveee this theeemee thXXXX v muchh
Click to expand...
Click to collapse
Will try to do it when i hav the time. (been busying with my office work).

Therme updated with "Black" theme. See post #1

BLACK IS AWESOMMMMME!!
IM APPLYING IT RIGHT NOW THX A MILLION
but its kinda gray isnt it ??
could u make it more blacky please ??

thanks! I've been looking for black

more info for v7 skrillax BL please

ok guys im abit rusty can anyone please run me through how i can change the bootlogo image when i start the tab? ive seen that little 5 line guide in the thread but im not 100% sure plus everyone else boot images look soo cool compared to my black and gold acer sign lol

@chismay..... Just to clarify do you mean the static "acer" boot screen or do you mean active bootanimations?

metpolds said:
@chismay..... Just to clarify do you mean the static "acer" boot screen or do you mean active bootanimations?
Click to expand...
Click to collapse
lol srry matey i mean the acer logo boot screen, i got the nice blue flashing alienware alien head for animation credit to JaeKar99

Kay..... I've been fiddling around trying to find a way to do that myself..... I'll let you know if I ever find anything useful :fingers-crossed:
I've managed it on my Viewsonic GTab but no luck on the A500 so far

Ok guys, here ya go.
First. All credit goes to Skrylax_CZ and blackthund3r. All I did was record the process and post. skrylax_CZ's thread is here.
My setup for this is a Win7 64bit pc and an A500, stock rooted with V8 bootloader. You will be prompted to plug in the tablet at the appropriate time. So for now have it unplugged from the USB.
What you need.
A charged Tablet.
Installed V8 Bootloader by Scrylax_CZ (You can use V4 through V7, but your image will need to be 268x72. in other words... tiny. All images below depict an install with the V8 bootloader.)
A complete backup. (This is, after all, at your own risk.)
Your SBK number or your CPUID so you can get your SBK.
Current A500 drivers from Acers site.
An Image that is 1280x800. (If V4-V7 bootloader, use 268x72.).
Skrylax Green Background zip
(Or if V7 or less go here and grab the appropriate zip, not apx.).
Skrylax_CZ's BootLogo tool
And blackthund3r's APX flash tool
Here we go. Create a folder and unzip the three packages that you've downloaded. You should have a folder that resembles this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now select and open the folder named 'A500BootLogo_105_v8plus_win'. Open the program A500BootLogo.exe. You will see this.
Choose 'File' then 'Open'.
Browse to the folder where you unzipped your files and open the 500_a501_bootloaders_apx_ics_v8_green folder. Choose the file bootloader.bin.
You should see this.
Choose 'Image' then browse to the folder where your new bootlogo image is. THE IMAGE MUST BE 1280x800!!!
Here is mine.
That's Daisy!
Now I see this...
Next choose 'File' and then 'Save'. Name the file whatever you want, just leave the .bin extension alone.
Close the Bootlogo tool. Now choose and open the folder blackthund3r_A500_APX_Flash_Tool_v0.4. Open the application A500APXFlash.exe.you should see the image below. Click the blue arrow.
Enter your SBK number. Then click the blue arrow.
Select to 'Choose the files you want yourself' button. Click the blue arrow.
Tick "bootloader" then hit the arrow.
Choose the file that you named and saved earlier. Hit the arrow.
Time to plug your tab into the usb on your pc.
Skip this, just hit the arrow...
If you are rooted, choose to dump your BCT. You won't have but only one button until after you've completed this. The pic shows three buttons because I already have the files. Once it is finished hit the arrow.
Choose the 'Automatic' tab then "Enter APX Mode" button.
If your drivers aren't in order you will see this. Oops! (If this happens to you. Just make sure your tab is unplugged from the pc and download and install the drivers from the links in the window.)
If your drivers were (or are now) up to date you should get this after clicking the arrow.
The program will start it's job. You will see this on your tablet. It is my old BootLogo and at the top left it says "Entering Acer Download Mode".
Next you will be asked if your tablet is in APX mode or something like that. If your screen has the message at the top left as mine did the choose yes.
The program will once again begin working. Once it has finished you will see this.
And the program on your pc will be asking you to power down and then restart your tablet. When you restart you should see your new bootlogo! Here's mine for now...
Hope that clears that up just a bit.

nice guide, thanks for this:good:

yes nice one JdgM3NT4L cheers or that fella i could find that one anywhere
so i cant do it on the v7? damn lol
once again cheers for finding that for me,
also HEY DIBBZ!! LOL :highfive:

@JdgM3NT4L..... A really worthwhile walk-through of the complete process..... Congrats I really "thank" you for your effort.

chismay said:
so i cant do it on the v7? LOL :highfive:
Click to expand...
Click to collapse
Well, yeah you can do the same method using the v7 bootloader. Just make sure that your image is 268x72 instead of 1280x800.
Also goto Skrylax_CZ's download page here and grab your bootloader version.zip
It's just gonna be a little picture that fits into the area where the ACER is now.
But for a full screen shot of Daisy goodness you gotta go with v8.
EDIT; My post above is now updated.

chismay said:
...HEY DIBBZ!! LOL :highfive:
Click to expand...
Click to collapse
Hey chisme get 'daisy' sorted m8?? Lol

dibb_nz said:
Hey chisme get 'daisy' sorted m8?? Lol
Click to expand...
Click to collapse
lol not yet, i hate flashing bootloaders i dont know why i just...hate it...........it will grow on me though very soon too

Ok finished, all went fine. This is my new screen.
But still getting this screen popping up after the one I just edited.
Is there a way to change this screen to?
Thanks sooo much for your help.

[FIX_CM10] ParanoidAndroid ROM APN Settings

Hey guys, first of all I'd like to say im proud of being part of this great development team. Here I come with my first post on the XDA page, I hope it helps, feel welcome to comment and provide feedback.
Instructions\Requirements
-Must be rooted and running on the ParanoidAndroid ROM for the EPIC 4G
-Download the attachment below, extract and save the file to your phone's SD-Card.
-Use Root Explorer or equivalent to access the root of your phone.
-Navigate thru System/etc/apns.xml.
-Mount as R/W (top right corner option)
-Long press on "apns.xml" and rename as apns.xml.bak.
-Using root explorer go back to your SD-Card and long press on the apns.xml file and tap copy.
-Now go back to your system/etc folder and paste there.
-Next using voice dialer on your phone open apn's by talking into your phone, just say "Open Apn's" and tap the option
-Once you're there tap the soft menu key on your phone and tap "Restore to Default"
-Finally reboot your phone and you're done!!

So a bunch of aps showed up. Do i need to remove any?
Also do i need to radio check one?
Still stuck on sending.
Thanks
FYI running AOKP MS6

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well I ended up deleting the LTE APNs and select the ota one.
And then I was able to send/receive MMSs
THANK YOU!!!!
I think I really had 30hrs into this, with all the different installs.....
Sent from my SPH-D700 using xda app-developers app

i take that back, MMS is hit/miss

Katrachoboy19 said:
Hey guys, first of all I'd like to say im proud of being part of this great development team. Here I come with my first post on the XDA page, I hope it helps, feel welcome to comment and provide feedback.
Instructions\Requirements
-Must be rooted and running on the ParanoidAndroid ROM for the EPIC 4G
-Download the attachment below, extract and save the file to your phone's SD-Card.
-Use Root Explorer or equivalent to access the root of your phone.
-Navigate thru System/etc/apns.xml.
-Mount as R/W (top right corner option)
-Long press on "apns.xml" and rename as apns.xml.bak.
-Using root explorer go back to your SD-Card and long press on the apns.xml file and tap copy.
-Now go back to your system/etc folder and paste there.
-Next using voice dialer on your phone open apn's by talking into your phone, just say "Open Apn's" and tap the option
-Once you're there tap the soft menu key on your phone and tap "Restore to Default"
-Finally reboot your phone and you're done!!
Click to expand...
Click to collapse
step 1.. if you're on paranoid.. you have to be rooted right? Lol..
Sent from my SPH-D700 using xda app-developers app

Katrachoboy19 said:
Hey guys, first of all I'd like to say im proud of being part of this great development team. Here I come with my first post on the XDA page, I hope it helps, feel welcome to comment and provide feedback.
Instructions\Requirements
-Must be rooted and running on the ParanoidAndroid ROM for the EPIC 4G
-Download the attachment below, extract and save the file to your phone's SD-Card.
-Use Root Explorer or equivalent to access the root of your phone.
-Navigate thru System/etc/apns.xml.
-Mount as R/W (top right corner option)
-Long press on "apns.xml" and rename as apns.xml.bak.
-Using root explorer go back to your SD-Card and long press on the apns.xml file and tap copy.
-Now go back to your system/etc folder and paste there.
-Next using voice dialer on your phone open apn's by talking into your phone, just say "Open Apn's" and tap the option
-Once you're there tap the soft menu key on your phone and tap "Restore to Default"
-Finally reboot your phone and you're done!!
Click to expand...
Click to collapse
I figured I'd toss this out there as a way for us to pull together (hopefully) as a community.
Since ParanoidAndroid is based off of CM10, should the settings in apns-conf.xml (which I extracted and attached - just remove the ".zip" at the end of the file name) be the same on CM10?
I had applied the APN tweaks to CM10 (proxy/port settings) previously, and with this post had compared the info - and it's different. Just wondering if all these changes should be made to the APN settings.
I would imagine that all Sprint devices should have the exact same APN settings, but I could be wrong.

nathan951 said:
So a bunch of aps showed up. Do i need to remove any?
Also do i need to radio check one?
Still stuck on sending.
Thanks
FYI running AOKP MS6
Click to expand...
Click to collapse
All you had to do was press the menu button and tap on the option "restore to default" exit that, and reboot your phone that was it, give it another try n let me know what happens

altimuh said:
I figured I'd toss this out there as a way for us to pull together (hopefully) as a community.
Since ParanoidAndroid is based off of CM10, should the settings in apns-conf.xml (which I extracted and attached - just remove the ".zip" at the end of the file name) be the same on CM10?
I had applied the APN tweaks to CM10 (proxy/port settings) previously, and with this post had compared the info - and it's different. Just wondering if all these changes should be made to the APN settings.
I would imagine that all Sprint devices should have the exact same APN settings, but I could be wrong.
Click to expand...
Click to collapse
At first that's what I thought but after trying and trying I came to the conclusion that it wasn't going to work so thats why the differences on my xml from the default sprint settings, im not certain if this settings will work for any other ROMs but it works great on the 4.1.1 Paranoid.

Follow the steps carefully and give it another try

altimuh said:
I figured I'd toss this out there as a way for us to pull together (hopefully) as a community.
Since ParanoidAndroid is based off of CM10, should the settings in apns-conf.xml (which I extracted and attached - just remove the ".zip" at the end of the file name) be the same on CM10?
I had applied the APN tweaks to CM10 (proxy/port settings) previously, and with this post had compared the info - and it's different. Just wondering if all these changes should be made to the APN settings.
I would imagine that all Sprint devices should have the exact same APN settings, but I could be wrong.
Click to expand...
Click to collapse
Did you do everything carefully?

Katrachoboy19 said:
Did you do everything carefully?
Click to expand...
Click to collapse
I didn't use this (the OP's) tweak because I'm on CM10, not ParanoidAndroid.
All I was asking, is this tweak applicable (settings-wise) to CM10? The tweak for CM9/10 for APN's is not as involved as this; this fix changes a lot more of the settings on the APN page.

[THEME][N5] TWRP Materialised - Dark / Light / Play [redirected]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If someone is still looking at this thread, please set a new bookmark for the
Materialised theme thread in the general Themes and Apps section.
It's the only one I'm updating and monitoring.

Q&A
How to...
...install the theme:
The theme zips are not flashable. First installation has to be done manually:
Download the theme of your choice and rename it to "ui.zip".
On SD card (if device has internal and external storage, use the internal) open TWRP folder and create a folder called "theme", without capital letters.
Copy ui.zip to theme folder.
Restart to recovery.
...change the theme:
In Materialised settings, select CHANGE THEME.
Select the theme zip you want to use.
Confirm the change.
...remove the theme:
In Materialised settings, select the delete icon on the app bar.
Confirm the removal.
Alternatively, delete the ui.zip from /sdcard/TWRP/theme with a file explorer.
...change the recovery splash screen
In order to change the splash, one must unpack the recovery image, replace the splash and then repack the image.
This can be done using the Android Image Kitchen by @osm0sis, which is available for Windows, Linux and Android (mobile AIK).
The Materialised theme provides a front end for using the mobile AIK.
General prerequisites:
Make sure the splash screen you want to use is in .jpg format and matches your screen resolution (e.g. 1920x1080).
Splash samples can be found along with the themes in the resolution specific download folders over here.
Download a stock TWRP recovery image for your device.
Samsung users have to download .img files or pull them from the .tar files. Repacking .tar files won't work.
Change the splash while in recovery:
Download the AIK-Mobile-Installer.
Flash the AIK zip in recovery.
This will install the required scripts and binaries to \data\local\AIK-mobile.
In Materialised settings, select CHANGE SPLASH.
Select the stock TWRP .img file.
Select the .jpg file you want to use as splash screen.
Set options:
If Automatically install... is unchecked, the repack will only be created and saved to the same folder as the stock TWRP image.
If checked, the repacked recovery will also be installed on your device.
If Include current theme... is checked, the theme in its current state (accent color) will be included in the repack, replacing the stock TWRP ui.
The ui.zip will automatically be deleted from /sdcard/TWRP/theme, as it is no longer required.
Be aware that changing the accent color won't be possible with an integrated theme.
In general, I'd recommend to not include the theme into the repack. By keeping the ui.zip, there's always the stock ui as a fallback option in case there's something wrong with the theme.
Start repacking/flashing with a swipe.
During the process, Repacking in progress... will be shown.
Change the splash on a Windows PC:
Download and unpack Android Image Kitchen Win32.
Copy the stock TWRP .img file to the Image Kitchen folder.
In windows explorer, drag & drop the recovery image on the "unpackimg.bat".
Unpacking will create two new folders (ramdisk and split_image).
Rename the splash of your choice to "curtain.jpg" and drop it into /ramdisk/twres/images.
Hit "repackimg.bat".
This will create a "image-new.img", which you can then flash away using your preferred method.
...install image files while in recovery:
The theme currently utilises the Flashify script by @osm0sis to install boot, radio and recovery images.
The script comes with the theme and will automatically be installed to /sdcard/TWRP/flashify if required.
On the Install page, tap on Install Zip.
Select Install Image.
Select the .img file you want to flash.
Select the image type.
This selection determines the target partition. Make sure not to flash a radio.img to the boot partition...
Start flashing with a swipe.
...use the AROMA File Manager:
AROMA File Manager is not part of the theme.
The theme just contains a "shortcut" for directly starting AROMA FM, rather than going through the "install > flash zip" procedure.
Download this flashable zip.
Flash the zip in recovery.
This will copy the Aroma FM package to \TWRP\aromafm.
In Materialised settings, tick the option to use Aroma FM.
From the main menu, the theme will now start Aroma FM instead of the TWRP file manager.
...resolve common issues
When I reboot to recovery, the theme isn't applied. Any ideas?
This is most likeley due to wrong naming of the theme folder or the ui.zip.
Make sure the folder is named "theme", without capital letters.
Also check if you accidentally renamed the downloaded zip to "ui.zip.zip" (common pitfall when renaming the zip in windows explorer).
When I reboot to recovery, I get a "recovery bootloop". Is my phone broken?
Nope, this is most likeley due to a bad download.
Please download the theme again using another browser or app.

Splash Screens with and Recovery Repacks
Resources for creating custom Splash Screens
I've prepared a Splash Set for users to create their own splash screen from. The Splash Set contains:
an SVG file that can be edited using Inkscape
Roboto True Type Fonts (install them before you start to edit the SVG)
a folder with 1080x1920 sample curtains
Download: Splash Set
Preview: Gallery with sample splash screens created from the SVG
Collections of Splash Screens
If you want to share your splash screens, please prepare a post other users can download them from.
This post will then be linked from here.
Only splash collections will be linked (sets that cover multiple resolutions or accent colors for a certain resolution).
Dark splash screen set provided by @Primokorn.
Download from his original post and don't forget to thank him...
Collections of Recovery Repacks
If you want to share your recovery repacks, please prepare a post other users can download them from.
This post will then be linked from here.
Only repack collections will be linked (sets that cover all accent colors for a dark or light base version).

Awesome work! As mentioned many times

The themes linked in this thread contain some final adjustments. They're not the same as the beta versions you might already use, so please download them again.
2810 theme version is already online. The only difference is the use of True Type Fonts.

Working great on OnePlus One and its looking great! Thanks for your work!

Thanks for staying in recovery more often...he he
???

A Bomb, nothing more to say

Whoop whoop...about time....
Sent from my One A0001 using Tapatalk

I love it! Thanks!
Downloading now for my OPO.
The Answer to The Ultimate Question of Life, the Universe, and Everything is: CLEAN FLASH.

Great work mate :highfive:

I like it!!! Thank you.

What's the 281x version? I don't see mention of a 2.8.1.x anywhere on TWRP's site at all.

AWESOME

Trel said:
What's the 281x version? I don't see mention of a 2.8.1.x anywhere on TWRP's site at all.
Click to expand...
Click to collapse
I have a feeling you will soon...

Check Github of XYZ ROM ...[emoji13]

Awesome. The only thing i dont understand is, do i have to put ui.zip or 1080.zip in the name on nexus 5. Until now it was ui.zip
Sent from Pure Nexus 5

alen1901 said:
Awesome. The only thing i dont understand is, do i have to put ui.zip or 1080.zip in the name on nexus 5. Until now it was ui.zip
Sent from Pure Nexus 5
Click to expand...
Click to collapse
ui.zip

Bruuuuutal [emoji106]
Nexus 10 + TapaTalk

z31s1g said:
I have a feeling you will soon...
Click to expand...
Click to collapse
That feels like a "wink wink, nudge nudge"

[INSTALL TWRP BUMPED] Method by Imageprep [100% WORK][Not Semibrick]

CUSTOM RECOVERY TWRP BUMPED BY IMAGEPREP
1. NEED INSTALL LG Mobile Drivers v3.14.1 and vcredist
2. Activate "USB Debugging"
3. Download TWRP v2.8.0.0 Bumped with Imageprep
4. Decompress "Archivos" folder and "Imageprep" folder in desktop
5. Open "Imageprep" folder and run by administrator "imageprepGUIv2.6.exe"
6. Click on "Next" --> "Next" and the show imageprep menu. ATENTION!.
7. Check "I have my own copy of KITKAT image files (aboot.img, laf.img)"
8. Check "I have my own copy of "bump'd" TWRP Custom Recovery"
9. Click on Next
10. Check "ONLY install "bump'd" TWRP Custom Recovery"
11. Click on Next
12. Unplug USB-CABLE and click "OK"
13. Show message "Please select your LG G3 KITKAT ABOOT Image file (aboot.img)" PLUG LG G3 TO PC and click on OK
14. Go to "Archivos" folder and select "aboot.img"
15. Do the same with "laf.img"
16. Do the same with "twrp-2.8.0.0_d855-signed.img"
17. Show resume message and click "OK" and open new windows Imageprep.
18. View LG G3 screen and this show message "trust me on this computer" touch on "ALLOW".
19. Dont close imageprep program and not unplug usb-cable, REBOOT AUTOMATICALLY and viewing TWRP Recovery.
20. Enjoy
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
UPDATE TWRP TO v2.8.7.0
+ Need ROOT and TWRP Bumped
1. DownloadTWRP v2.8.7.0 Bumped D855.zip
2. Input .zip to internal storage
3. Reboot in TWRP Recovery
4. Flash .zip
5. Touch Reboot ---> Reboot Recovery ---> confim version is 2.8.7.0
6. Done!
Thanks to @topet2k12001 for ImagePrep.

In another thread you asked for help because you semi bricked your phone using this method and now you say 100% works?
Sent from my LG-D850 using XDA Free mobile app

Did you just stamp your name into someone else's work and repost it in the wrong forum with no credit to the author? (topet2k12001)
Original thread: http://forum.xda-developers.com/lg-g3/general/guide-update-to-lollipop-root-bumpd-twrp-t3048845
Please, anyone attempting this, read the above link before you do anything..

shawkes said:
In another thread you asked for help because you semi bricked your phone using this method and now you say 100% works?
Sent from my LG-D850 using XDA Free mobile app
Click to expand...
Click to collapse
Semibrick using other methods. Imageprep method work 100%

JoinTheRealms said:
Did you just stamp your name into someone else's work and repost it in the wrong forum with no credit to the author? (topet2k12001)
Original thread: http://forum.xda-developers.com/lg-g3/general/guide-update-to-lollipop-root-bumpd-twrp-t3048845
Please, anyone attempting this, read the above link before you do anything..
Click to expand...
Click to collapse
It has to do to put my nickname on the images that I created to guide users?
In the original thread specified as the only flash TWRP.
edit the post and add the author of ImagePrep
Note: Moderator move thread to specific forum, sorry

KrAzYtHeBoY said:
CUSTOM RECOVERY TWRP BUMPED BY IMAGEPREP
1. NEED INSTALL LG Mobile Drivers v3.14.1 and vcredist
2. Activate "USB Debugging"
3. Download TWRP v2.8.0.0 Bumped with Imageprep
4. Decompress "Archivos" folder and "Imageprep" folder in desktop
5. Open "Imageprep" folder and run by administrator "imageprepGUIv2.6.exe"
6. Click on "Next" --> "Next" and the show imageprep menu. ATENTION!.
7. Check "I have my own copy of KITKAT image files (aboot.img, laf.img)"
8. Check "I have my own copy of "bump'd" TWRP Custom Recovery"
9. Click on Next
10. Check "ONLY install "bump'd" TWRP Custom Recovery"
11. Click on Next
12. Unplug USB-CABLE and click "OK"
13. Show message "Please select your LG G3 KITKAT ABOOT Image file (aboot.img)" PLUG LG G3 TO PC and click on OK
14. Go to "Archivos" folder and select "aboot.img"
15. Do the same with "laf.img"
16. Do the same with "twrp-2.8.0.0_d855-signed.img"
17. Show resume message and click "OK" and open new windows Imageprep.
18. View LG G3 screen and this show message "trust me on this computer" touch on "ALLOW".
19. Dont close imageprep program and not unplug usb-cable, REBOOT AUTOMATICALLY and viewing TWRP Recovery.
20. Enjoy
UPDATE TWRP TO v2.8.7.0
+ Need ROOT and TWRP Bumped
1. DownloadTWRP v2.8.7.0 Bumped D855.zip
2. Input .zip to internal storage
3. Reboot in TWRP Recovery
4. Flash .zip
5. Touch Reboot ---> Reboot Recovery ---> confim version is 2.8.7.0
6. Done!
Thanks to @topet2k12001 for ImagePrep.
Click to expand...
Click to collapse
I still don't know why you did this post, since there's already one from the original author.

Hmmm, I really don't see the point in this thread as the original thread by the original creator has everything you need to know plus a video tutorial which goes through basically everything in this OP. Let's keep everything to the original thread where bug reports can be posted and possibly fixed.
Thread closed