Hi ..
for everyone who´s having trouble with blueetooth audio / headset or car connection.
You could fix it in most cases very easy...just do the things described below:
Open root file manager and edit "audio_policy.conf".
Change the following section:
from
a2dp {
outputs {
primary {
sampling_rates 48000
channel_masks AUDIO_CHANNEL_OUT_STEREO
formats AUDIO_FORMAT_PCM_16_BIT
devices AUDIO_DEVICE_OUT_ALL_A2DP
flags AUDIO_OUTPUT_FLAG_PRIMARY
}
to
a2dp {
outputs {
primary {
sampling_rates 44100|48000
channel_masks AUDIO_CHANNEL_OUT_STEREO
formats AUDIO_FORMAT_PCM_16_BIT
devices AUDIO_DEVICE_OUT_ALL_A2DP
flags AUDIO_OUTPUT_FLAG_PRIMARY
}
After that reboot and pair the device again...now audio should work for you..
I have attached my audio_policies.conf.. so you can use it ..rename old audio_policies.conf to audio_policies.conf.old and copy the one attached ..then reboot
Remember: Every changes are on you own risk ...
OMG !!!
I've tried over 6 different ROMs for the past two months just to find one with BlueTooth Audio Streaming functional!
I thought it was a driver problem. I can't believe the fix is so easy, and it's very strange that it's not implemented in any ROM for L7 out there!
Thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you! :good:
Related
WM6.1(19213,19588,20273), All ROMs have this bug:
Could not beam files via irDA.
Who can help me?
Thank you very much!
Use Algasys 1710 or Sanjay V3 full (8mg PP), all works as you expected .I dont see any noticeable diff with V1g ,in speed ...
I have troubles with V1g , IRDA dont work
Regards
Gustavo
Hi,
I am trying to add a text view with a non English alphabet like Farsi, this is how I did it in .xml file
<EditText android:text="در کشورهای "
the problem is when i vue the aps in "" it shows symboles,
anyone can help with this please?
thanks in advance
Android doesn't support Farsi. But you can mod it. I know there are mods available for the Nexus One and the G1. Here's a link for the N1: http://forum.xda-developers.com/showthread.php?t=616384
It seems you will need to use Cyanogen's Rom.
BTW, I would recommend you not to hardcode your strings like that, instead use something like "@string/sometext" , and put your string values in values/strings.xml
Hi Guys
How are You ? i Hope You are Fine
so i Decide to Explain to You How To Format your phone and install a Custom Rom on You Smart Phone (ANDROID) :
THis is The Video
http://www.youtube.com/watch?v=jDTitz8GBPM
if You Like it Don't Forget to Subscribe in my channel on youtube :
http://www.youtube.com/user/ANDROIDTUTORI
Thank's For watching
Joe Mark
thanks you showed me that youtube has a new design =)
btw there are so many video guides about that
Your Welcome !!
Hello all programmers,
My app is supposed to display the device name so I used this to get the device name:-
Code:
String x = android.os.Build.MANUFACTURER + " " android.os.Build.MODEL;
x=x.toUpperCase();
TextView a = (TextView)findViewById(R.id.devicemodel);
a.setText("DEVICE:- " + x);
It works very well on my Samsung Galaxy Tab 2 P3100 and all my Xperia Phones too (even on the virtual emulator), but the only problem is with Samsung Galaxy Y phones. The String appears empty and all that is displayed is DEVICE:-
Any ideas why this is happening? I think that the build.prop doesn't contain these values or something like that.
Thanks,
abcdjdj
can you do for me ths fever or just tell me how to do it
Hello everybody
i have two firmware for two Chinese tablets they have the same possessor ram all things is same ,just a camera and the screen is not the same ...
the first firmware (rom ) is good and much better than the original firmware for my android tablet .... and i try to install it and it s working well .. but i have two problems the camera and touch screen didn't work ....
so how can do to fix this problems .. ... what i should take from the original ROM to make it on the other ROM ?
or can you do it for me ?? i can send the two roms...
please tell me what i should do for any questions i am here to answer thanks ....
edd-1988 said:
Hello everybody
i have two firmware for two Chinese tablets they have the same possessor ram all things is same ,just a camera and the screen is not the same ...
the first firmware (rom ) is good and much better than the original firmware for my android tablet .... and i try to install it and it s working well .. but i have two problems the camera and touch screen didn't work ....
so how can do to fix this problems .. ... what i should take from the original ROM to make it on the other ROM ?
or can you do it for me ?? i can send the two roms...
please tell me what i should do for any questions i am here to answer thanks ....
Click to expand...
Click to collapse
Create your own thread for that!
Bump. Anyone please??
Solved it myself. The device name should have been set in onCreate instead of the menu inflating function.
Sent from my GT-P3100 using xda app-developers app
I´ve converted this bootanimation so we can use it on our Tab 3.
Preview:
http//s942.photobucket.com/user/inactive123456/media/intel_v11_zps5ef8e9b9.gif(dot)html
[I cant add images because this is my first thread]
I´m going to convert more bootanimations.
If you have any special one you want to be converted, post the file, the device, and the resolution below.
1.Backup your old "/system/media/bootsamsungloop.qmg"
2.Paste the new "bootsamsungloop.qmg" there
3.Set permission to rw-r-r
Note: I´m not responsible for any damage. The bootanimation has been tested on a rooted GT-P5200.
Please give feedback.
Nice, thanks :good:
Sent from my roomate's computer