I installed a custom font on my Tab. I decided to try and replace the Roboto_Bold.ttf, and that's why my Tab started to boot loop. (Long story short: I did the same thing to my Nexus, but I was able to salvage what I could and am now in the process of flashing a new ROM). I wiped the Cache/Dalvik on my Tab and flashed the ROM I had on it, over itself without wiping--thinking it would give me enough control to be able to flash a new ROM. I was wrong. I install the latest CWM (v5.5.0.4) and I go into Recovery mode. CWM won't let me Wipe Data. It just sits there, then ultimately kicks me back to the CWM "Home" screen; the same thing happens when I use an older version of CWM (v4.0.0.4). I've tried restoring backups and nothing works. I even had difficulty mounting the Tab on my laptop long enough to transfer over the newer ROM.
I have no clue what to do, and I feel so powerless. I usually can fix this kind of stuff by myself, but I can't this time.
Any and all help is appreciated.
Flash to stock using Odin ...I think you'll be able to reach downloading mode.
Of not try via adb of You are sure that debugging is checked
Sent from my GT-S5360 using Tapatalk
kishorsidu said:
Flash to stock using Odin ...I think you'll be able to reach downloading mode.
Of not try via adb of You are sure that debugging is checked
Sent from my GT-S5360 using Tapatalk
Click to expand...
Click to collapse
I can reach Download mode--but I have no clue how to flash anything from ODIN. -_-
Shameless bump.
Autocorrected from my GNexus
Here is a good guide to start over (is the last part "Re-“Stocking” Yer System…"): The Guide. The only problem is that you'll lose all your data.
I had a similar problem, but instead of going back to stock, I manually wiped the data/cache folders via adb, some folder was the culprit, it couldn't be deleted with its content, so first I deleted everything inside the folder and then the folder (in terms of commands, I did a rmdir instead of rm -r).
MapleSyrup said:
Here is a good guide to start over (is the last part "Re-“Stocking” Yer System…"): The Guide. The only problem is that you'll lose all your data.
I had a similar problem, but instead of going back to stock, I manually wiped the data/cache folders via adb, some folder was the culprit, it couldn't be deleted with its content, so first I deleted everything inside the folder and then the folder (in terms of comands, I did a rmdir instead of rm -r).
Click to expand...
Click to collapse
I don't mind losing the data; however, would you mind sharing the commands with me?
natezire71 said:
I don't mind losing the data; however, would you mind sharing the commands with me?
Click to expand...
Click to collapse
This is not a step by step guide, be careful if you decide to use this method, so you won't delete anything important.
First, to access the tablet shell
Code:
adb shell
To gain root permissions
Code:
su
To remove/wipe the data
Code:
rm -r /data/data/*
That's when I encountered the problem, I had to delete directories by groups until I found the problematic one. In my case was com.google.android.tts/
Then I did:
Code:
rm -r /data/data/com.google.android.tts/*
Code:
rmdir /data/data/com.google.android.tts/
MapleSyrup said:
This is not a step by step guide, be careful if you decide to use this method, so you won't delete anything important.
First, to access the tablet shell
Code:
adb shell
To gain root permissions
Code:
su
To remove/wipe the data
Code:
rm -r /data/data/*
That's when I encountered the problem, I had to delete directories by groups until I found the problematic one. In my case was com.google.android.tts/
Then I did:
Code:
rm -r /data/data/com.google.android.tts/*
Code:
rmdir /data/data/com.google.android.tts/
Click to expand...
Click to collapse
So, what was the problem you had? Couldn't you have just wiped in Clock Work?
Autocorrected from my GNexus
natezire71 said:
So, what was the problem you had? Couldn't you have just wiped in Clock Work?
Click to expand...
Click to collapse
That was the problem, I couldn't do it in cwm.
Just wanted to put it out there that I erased the data using Super Manager. Not a clean enough delete for preparing it for sale but good enough for my intentions.
Hello All,
I would really appreciate help on this issue I have been having. I recently rooted then unlocked the bootloader of my device. I downloaded a root uninstaller and may have somehow killed the home process from running. Now, when i turn on the device, i get the error
The application Home (process com.motorola.home) has stopped unexpectedly
It does not go away and comes repeatedly back, not allowing me to change any settings whatsoever. I don't know what to do. I tried going into android recover mode and both wiped the device and cleared the cache, but the problem persists. I also tried putting a cyanogenmod version on the devices SD card but cant get it install because for some reason I can't get clockwork mod installed correctly. I cannot turn on USB debugging mode because I can't get into the settings. I tried using the .sbf to flash it but it is the .sbf I used to unlock the device so I am not sure that is the right one or if the right one would even do the trick, I fear that the system files that run the home application may be corrupt, deleted or permanently inactive. I would appreciate any ideas people may have to help me.
Also, becuase I factory reset the device, the bootloader is unlocked, but it is no longer rooted, and I cannot root it at this time becuase I cannot turn on USB debugging mode.
I was looking at the guide here;
http://forum.xda-developers.com/showthread.php?t=1302423
And was wondering why it didn't work when I tried to install CWM, then I noticed something I didnt see;
"DO NOT FORGET TO DO THIS PART: After the install of RomRacers recovery boot up your phone. Open up your favourite file browser (I used Astro file manager to do this ) and navigate to /system/etc/ and delete the file called 'install-recovery.sh'"
Is there a way to do this from the PC as I wouldn't be able to on my device? Or is the fact that it is not currently rooted going to stop me from doing anything?
Thanks,
heronpj said:
I was looking at the guide here;
http://forum.xda-developers.com/showthread.php?t=1302423
And was wondering why it didn't work when I tried to install CWM, then I noticed something I didnt see;
"DO NOT FORGET TO DO THIS PART: After the install of RomRacers recovery boot up your phone. Open up your favourite file browser (I used Astro file manager to do this ) and navigate to /system/etc/ and delete the file called 'install-recovery.sh'"
Is there a way to do this from the PC as I wouldn't be able to on my device? Or is the fact that it is not currently rooted going to stop me from doing anything?
Thanks,
Click to expand...
Click to collapse
If you are familiar with ADB, the basic commands would be:
Code:
adb remount rw
adb shell
While in the ADB shell:
cd /system/etc
rm install-recovery.sh
exit
that should cover it.
let me know if this works for ya.
Thanks for your response. The only problem is my phone isn't in USB debug mode, and I can't set it to be. Any idea of how to get that turned on without being able to get into the settings?
FaithCollapsing said:
If you are familiar with ADB, the basic commands would be:
Code:
adb remount rw
adb shell
While in the ADB shell:
cd /system/etc
rm install-recovery.sh
exit
that should cover it.
let me know if this works for ya.
Click to expand...
Click to collapse
heronpj said:
Thanks for your response. The only problem is my phone isn't in USB debug mode, and I can't set it to be. Any idea of how to get that turned on without being able to get into the settings?
Click to expand...
Click to collapse
can you boot into recovery?
FaithCollapsing said:
can you boot into recovery?
Click to expand...
Click to collapse
I can, and have down a wipe data as well as cleared the cache, problem persists.
Solved!!! I was able to basically button mash until somehow the screen to log into the play store came up. Download launcher pro and that got me back into my phone! Thanks for your help
Hi,
So today the front of my Nexus 4 cracked and rendered it completely dysfunctional. The worst part is that there's a screen lock, making it impossible for me to access through Android File Transfer. I was reading that you could use adb and screencast to access the phone and to unlock it, allowing for me to retrieve files. But after installing and running commands, it seemed like I couldn't find a device when I inputted the command 'adb devices'. I know, I searched it up and I think the reason is that usb debugging was not enabled (I don't remember if I did or didn't enable it at all). I've read past threads which explain how to enable it even with a cracked screen but I'm just too confused on how to do it. All this SDK and AVD stuff confuses the heck out of me (I'm fairly new to the whole Android notion) so I practically have the IQ of a 5 year old. My phone is rooted (In which it did wipe the memory so that may be why debugging could be off) and I'm currently flashing Cyanogenmod. Could someone please explain to me how do I enable debugging with a dysfunctional screen like I'm 5? Also, if there were an easier alternative to retrieving/backing up my files that would be nice knowing too because all of this stuff is currently doing my head in.
Thanks!
You can try to access adb from recovery too.
Turn off phone and start by holding VOL-DOWN and POWER together. You will boot into BOOTLOADER mode and there switch to RECOVERY MODE by VOLUME button (2 times press is this mode). If you have installed CyanogenMOD, then you have probably advanced recovery (CWM or TWRP). Now try command "adb devices".
If you haven't CWM or TWRP recovery installed, boot again into BOOTLOADER mode and flash recovery by fastboot.
xjcook said:
You can try to access adb from recovery too.
Turn off phone and start by holding VOL-DOWN and POWER together. You will boot into BOOTLOADER mode and there switch to RECOVERY MODE by VOLUME button (2 times press is this mode). If you have installed CyanogenMOD, then you have probably advanced recovery (CWM or TWRP). Now try command "adb devices".
If you haven't CWM or TWRP recovery installed, boot again into BOOTLOADER mode and flash recovery by fastboot.
Click to expand...
Click to collapse
Thanks for the quick reply,
After I hit advanced recovery and selecting my backup, which option do I press? Do I restore the boot, system, data, cache, or sd-ext?
Also typing in adb devices only lists the recovery device and I don't seem to be able to access it through Android File Transfer, what do I do with the serial number it tells me?
By the way I don't have any backups when I had no screen pattern so wouldn't recovering those areas still give get me locked out?
loolnicetry said:
Thanks for the quick reply,
After I hit advanced recovery and selecting my backup, which option do I press? Do I restore the boot, system, data, cache, or sd-ext?
Also typing in adb devices only lists the recovery device and I don't seem to be able to access it through Android File Transfer, what do I do with the serial number it tells me?
By the way I don't have any backups when I had no screen pattern so wouldn't recovering those areas still give get me locked out?
Click to expand...
Click to collapse
Android File Transfer is not working in recovery mode, but you can pull required files by "adb pull /sdcard/some-file-or-folder/ /to/some/path/on/your-system/". Of course you can pull whole /sdcard/. You can try also adb backup (I didn't try it yet). From recovery you can also make nandroid backup of the system and transfer to computer by adb pull.
In recovery mode you have access to full system (maybe you must mount some partitions), that means you can use magic command "adb shell", to get shell (in shell you can use "ls" for list files, "cd" for change directory) and do what you want. To remove screen lock try some guide from XDA, I've found for example [GUIDE][HOW-TO]Crack android pattern lock! or [EASIEST]Crack Android Pattern/Pin/Password Lockscreen without root.
I hope this will help you.
xjcook said:
Android File Transfer is not working in recovery mode, but you can pull required files by "adb pull /sdcard/some-file-or-folder/ /to/some/path/on/your-system/". Of course you can pull whole /sdcard/. You can try also adb backup (I didn't try it yet). From recovery you can also make nandroid backup of the system and transfer to computer by adb pull.
In recovery mode you have access to full system (maybe you must mount some partitions), that means you can use magic command "adb shell", to get shell (in shell you can use "ls" for list files, "cd" for change directory) and do what you want. To remove screen lock try some guide from XDA, I've found for example [GUIDE][HOW-TO]Crack android pattern lock! or [EASIEST]Crack Android Pattern/Pin/Password Lockscreen without root.
I hope this will help you.
Click to expand...
Click to collapse
I CANNOT THANK YOU ENOUGH! You were easy to understand and got straight to the point which was perfect! On a side note, do you know if there's a way I can extract and save my sms messages and read them on my computer? I know I can take out the .db file but it's complicated to open on a Mac and it's quite an effort. (Considering my phone still has a lock on it)
loolnicetry said:
I CANNOT THANK YOU ENOUGH! You were easy to understand and got straight to the point which was perfect! On a side note, do you know if there's a way I can extract and save my sms messages and read them on my computer? I know I can take out the .db file but it's complicated to open on a Mac and it's quite an effort. (Considering my phone still has a lock on it)
Click to expand...
Click to collapse
I'm really happy that I helped you!
Android is storing messages, contacts in SQLite database, there is not another way to grab these files from recovery. But it's not complicated to extract these files. Download for Mac OS X sqlite-shell-osx-x86-XXX.zip from SQLite Download Page and extract it somewhere.
Then pull messages by
Code:
cd /path/where/is/extracted-sqlite
adb pull /data/data/com.android.providers.telephony/databases/mmssms.db .
Finally you can list your messages by
Code:
./sqlite3 mmssms.db 'select address,body from sms'
If last command is not working try make it executable and repeat previous step
Code:
chmod +x sqlite3
xjcook said:
I'm really happy that I helped you!
Android is storing messages, contacts in SQLite database, there is not another way to grab these files from recovery. But it's not complicated to extract these files. Download for Mac OS X sqlite-shell-osx-x86-XXX.zip from and extract it somewhere.
Then pull messages by
Code:
cd /path/where/is/extracted-sqlite
adb pull /data/data/com.android.providers.telephony/databases/mmssms.db .
Finally you can list your messages by
Code:
./sqlite3 mmssms.db 'select address,body from sms'
If last command is not working try make it executable and repeat previous step
Code:
chmod +x sqlite3
Click to expand...
Click to collapse
For the pulling of the .db file, it says the remote object does not exist, what should I do?
loolnicetry said:
For the pulling of the .db file, it says the remote object does not exist, what should I do?
Click to expand...
Click to collapse
Hmm that is strange, maybe this will help you (especially check first answer): http://stackoverflow.com/questions/12266374/backup-full-sms-mms-contents-via-adb
Sent from my Nexus 4 using Tapatalk
xjcook said:
Hmm that is strange, maybe this will help you (especially check first answer):
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
When I try to enter the $mkdir command it says it's not found. Am I meant to include the $ in the command?
xjcook said:
Hmm that is strange, maybe this will help you (especially check first answer): http://stackoverflow.com/questions/12266374/backup-full-sms-mms-contents-via-adb
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
I FIXED IT MYSELF! I'm feeling a bit smart haha, it turns out my system and data wasn't mounted and all I had to do was mount it through cwm. Thanks a lot friend you were a great help, I'd be panicking a substantial amount without you!
I have successfully recovered the Kindle Fire HDX 8.9 from the soft brick which occurs from removing or altering system files.
THIS IS SPECIFICALLY FOR THOSE THAT REMOVED (PERSONALLY OR VIA SCRIPT) SOMETHING FROM THE SYSTEM PARTITION OR MESSED WITH THE BUILD.PROP. This guide focuses on a fix for ONE specific issue, so read it, determine what your issue is & then make the necesarry changes, or ask what changes need to be made. I have a bit of time over the next few days before going back to my job as a mechanical engineer, which means come the second week of January, I will be EXTREMELY busy.
I will be available via hangouts & IRC to guide you through recovery of your device when possible. The IRC channel will be #HDX & I will occasionally check in.
To recover your device, you must be rooted. Rooting may be possible while in boot loop, but it is VERY difficult & everything is about timing.
Firstly, you need to have everything from the root post by jcase to get started. You will also need adb & the Android SDK installed. Since it seems most of you are on Windows, I have forgone my linux distro & focused on finding a Windows solution, though this should work on Linux or Mac as well.
My particular brick was on purpose. It was based on the softbrick that can occur when using the root/Play store script by Ptiwee that is found here: http://forum.xda-developers.com/showpost.php?p=48739126&postcount=1
In this instance, if any part of the odex removal/replacement fails, you will be stuck in a bootloop. If you factory reset after being stuck, you complicate issues, because init is not able to complete & you then have an empty /data partition. This means that the fix differs depending on whether or not you did indeed perform a factory reset from the HDX recovery menu.
If you did perform a reset, then you need to do the following:
Download the HDX 8.9 root & follow jcase instructions from here: http://forum.xda-developers.com/showthread.php?t=2542456.
It will fail because the /data/local/tmp directory does not exist yet.
After completing these steps & failing, open cmd prompt & issue "adb shell" command.
Issue "su" command.
In the SU shell, issue the following set of commands:
mkdir /data
mkdir /data/local
mkdir /data/local/tmp
chmod 755 /data
chmod 755 /data/local
chmod 755 /data/local/tmp
adb shell
su
mount -o rw,remount /system
I then ran through the exploit from jcase again.
Then I opened a cmd window & did the following
adb root
adb shell
su
mount -o remount /system
This is where things get specific for my issue, which was the new services.odex that the ptiwee script installed.
for this issue, I opend a second terminal window & did the following:
adb push services.odex /data/local/tmp/services.odex
adb push DownloadProvider.odex /data/local/tmp/DownloadProvider.odex
adb push DownloadProviderUi.odex /data/local/tmp/DownloadProviderUi.odex
Now go back to your first cmd shell window & do the following (you may need to unplug the usb cable & quickly reinsert it):
adb shell
su
mount -o remount /system
exit
chmod 755 /data/local/tmp/services.odex
chmod 755 /data/local/tmp/DownloadProvider.odex
chmod 755 /data/local/tmp/DownloadProviderUi.odex
su
rm /system/framework/services.odex
cp /data/local/tmp/services.odex /system/framework/services.odex
chmod 755 /system/framework/services.odex
(for me on this issue, which was confirmed via logcat in Linux using Qtadb, the device screeen fully booted at this point, by itself)
However, you may need to also do this:
cp /data/local/tmp/DownloadProvider.odex /system/app/DownloadProvider.odex
cp /data/local/tmp/DownloadProviderUi.odex /system/app/DownloadProviderUi.odex
This would also apply to a modified build.prop bootloop. You would of course change the file you are move & chmod to build.prop & adjust the target directory accordingly.
My device is 100% working again & using this info, if you are stuck in a bootloop from changing, removing or whatever files, you should be able to similarly recover using a modified version of the data above.
Again, you really need to know what you were doing that caused the issue in the first place, but if you have a good idea what did it, then chances are you can recover.
Now hit thanks & let me know how you goofed up your device & we'll see if we can't fix it.S
Thanks for this. I tried this method to get google play working, which was no doubt something I did wrong in the process as others had success there (could be 8.9 vs 7 but I was willing to try). It was stuck with the orange Fire logo lit, but luckily ADB still recognized it, though windows wouldn't detect it as a USB drive. I had an issue when replacing services.odex with another, and this caused mine to immediately crash and never fully boot right when I changed the file. It was 0 bytes when viewed from the shell.
I was really rattled last night trying to figure out how to get the files back in place, as I could not get su to work from the shell, so permission denied on chmod and any attempt to remount /system as rw. Thankfully, I had the foresight to get the files pulled to my PC before I did the factory reset (I backed up all amazon files I was changing). Your instructions got me going again, and I finally got su to work and put those files back in place. It still wouldn't boot, so I did another factory reset (desperation) and re-rooted it.
Unfortunately, where it was once to the point with the Fire lit up, it vanishes when it would normally do that and is now stuck on a blank screen, though still recognized by adb. I can even get in the shell, but am at a loss as to what I might do next to get this thing booting. The only files I go around to modifying were DownloadProvider/ui apk and odex, along with services.odex. I'd very much appreciate any advice at this point.
I feel hopeful just to have su and still have access to adb with the files back in place, just confused on how it could be failing at this point. I'm obviously a novice and shouldn't have gone poking around too much until more experienced people had figured the 8.9 out, but I was too excited to get authentication from the Play Store working on this thing and willing to take the risk. If I get it working again, I'll be glad I've done all this, just because of how much I've learned from the process.
Edit: Yesss! chmod 755 on /system/framework did the trick. it was not executable Thank you so much for your effort here.
Followed the guide, Kindle is back again at least works...
But when I try to open the camera app... It never opens and just stays there until it closes... Any ideas?
(Will find more stuff and post just in case)
Poesini said:
Followed the guide, Kindle is back again at least works...
But when I try to open the camera app... It never opens and just stays there until it closes... Any ideas?
(Will find more stuff and post just in case)
Click to expand...
Click to collapse
@Poesini
Once you have it working, to the point of booting into the OS, grab the update.bin from Amazon (update-kindle-14.3.1.0_user_310079820.bin) here:
https://s3.amazonaws.com/kindle-fire-updates/update-kindle-14.3.1.0_user_310079820.bin
Once downloaded, grab a root level file explorer. I use the paid Root Explorer because it has built in root acess, a text editor & a ro/rw toggle button, but others should surely work. Make sure that the /System partition/directory is mounted as RW, then open the file build.prop & edit all the entries that say "310079820" to be"310079819".
You will find them in the build.prop as follows:
ro.build.version.incremental=14.3.1.0_user_310079820
ro.build.version.number=310079820
ro.build.description=apollo-user 4.2.2 JDQ39 14.3.1.0_user_310079820 release-keys
ro.build.fingerprint=Amazon/apollo/apollo:4.2.2/JDQ39/14.3.1.0_user_310079820:user/release-keys
Do not add the parenthesis, just change the last three number to 819 & then be sure to save the file. Open it again to ensure the edits were made, so you are certain that the device directory was indeed RW. Once that is done, make sure the permissions are set to 0644, or rw-r--r-- & check the ownership to make certain the owner & group are both set to "Root". If you do not work on the "live" build.prop, then copy the edited build.prop to the root folder (/) first, then check permissions or change them using adb chown & chmod commands as required.
Again, I suggest copying the file to your PC as a backup, though you will have a copy in the downloaded update.bin (which is just a zip archive). I also suggest using a root explorer with a built in text editor, like Root Explorer.
Once this is done & you are certain the build.prop has been edited, copy the update.bin to the storage (sdcard) root & reboot the device.
Once the device has reboot, go into settings, device, system updates & select the install update button. Follow the directions & the device will reboot again & install the firmware. Any mods made to the System directory will be gone & everything should work again.
chratcliff said:
Thanks for this. I tried this method to get google play working, which was no doubt something I did wrong in the process as others had success there (could be 8.9 vs 7 but I was willing to try). It was stuck with the orange Fire logo lit, but luckily ADB still recognized it, though windows wouldn't detect it as a USB drive. I had an issue when replacing services.odex with another, and this caused mine to immediately crash and never fully boot right when I changed the file. It was 0 bytes when viewed from the shell.
I was really rattled last night trying to figure out how to get the files back in place, as I could not get su to work from the shell, so permission denied on chmod and any attempt to remount /system as rw. Thankfully, I had the foresight to get the files pulled to my PC before I did the factory reset (I backed up all amazon files I was changing). Your instructions got me going again, and I finally got su to work and put those files back in place. It still wouldn't boot, so I did another factory reset (desperation) and re-rooted it.
Unfortunately, where it was once to the point with the Fire lit up, it vanishes when it would normally do that and is now stuck on a blank screen, though still recognized by adb. I can even get in the shell, but am at a loss as to what I might do next to get this thing booting. The only files I go around to modifying were DownloadProvider/ui apk and odex, along with services.odex. I'd very much appreciate any advice at this point.
I feel hopeful just to have su and still have access to adb with the files back in place, just confused on how it could be failing at this point. I'm obviously a novice and shouldn't have gone poking around too much until more experienced people had figured the 8.9 out, but I was too excited to get authentication from the Play Store working on this thing and willing to take the risk. If I get it working again, I'll be glad I've done all this, just because of how much I've learned from the process.
Edit: Yesss! chmod 755 on /system/framework did the trick. it was not executable Thank you so much for your effort here.
Click to expand...
Click to collapse
Glad to get you pointed in the right direction. This is what XDA used to be. How I learned anything at all. I am a mechanical engineer, not a software or hardware guy. Just a guy that will not give up on something broken.
It's all about taking little queues from here & there & then trying to assemble parts of different things into accomplishing what it is you are working on. All of this was based on things I tried or read in the past, working to root devices like the Xoom, etc... After reading about the exploit we had applied (what it is & how it works, some of which was beyond me), I was able to surmise that the exploit we used was still there as was the ability to access root permission, but that the tablet had "forgotten" we had root access rights because of the wipe. We just had to use adb to give it the files "memory" of our access to root & the permission to use them, in essence, tell it what we wanted. Working with a Linux or Android device is like working with the smartest person in the world that is also a 5 year old. It can do anything, yet hasn't the common sense to get it done. We need to provide that for it's brilliance to become useful.
As mentioned above, I highly recommend modding the build.prop & re-flashing the update.bin to have a clean slate.
GSLEON3 said:
Working with a Linux or Android device is like working with the smartest person in the world that is also a 5 year old. It can do anything, yet hasn't the common sense to get it done.
Click to expand...
Click to collapse
This is the damned truth never better spoken lol
Sent from my SPH-L900 using xda app-developers app
GSLEON3 said:
Ahhhhh.... XDA! The thrill of it all, you desperately want something now, you're a smart guy, you can do it & nothing beats that feeling of your sphincter tightening up, your heart racing, as you wait for that device to reboot....wait.....maybe another minute.....okay....crap... what do I do now? I love that feeling! I mean YOLO. Livin' dangerous dog, lol... Okay, I "bricked my device on PURPOSE, since there is a Play Store script in a ceertain tool that seems to be broken, or is missing information from the instructions, such as safestrap, or something.... That part I haven't figured out. I asked the creator to take a look at what he did & in the mean time, this should get you fixed up. It is actually much easier is you were not panicked to the point of factory resetting, but either way, the info below will get you sorted out.
I have successfully recovered the Kindle Fire HDX 8.9 from the soft brick which occurs from removing or altering system files.
THIS IS SPECIFICALLY FOR THOSE THAT REMOVED (PERSONALLY OR VIA SCRIPT) SOMETHING FROM THE SYSTEM PARTITION OR MESSED WITH THE BUILD.PROP. This guide focuses on a fix for ONE specific issue, so read it, determine what your issue is & then make the necesarry changes, or ask what changes need to be made. I have a bit of time over the next few days before going back to my job as a mechanical engineer, which means come the second week of January, I will be EXTREMELY busy.
I will be available via hangouts & IRC to guide you through recovery of your device when possible. The IRC channel will be #HDX & I will occasionally check in.
To recover your device, you must be rooted. Rooting may be possible while in boot loop, but it is VERY difficult & everything is about timing.
Firstly, you need to have everything from the root post by jcase to get started. You will also need adb & the Android SDK installed. Since it seems most of you are on Windows, I have forgone my linux distro & focused on finding a Windows solution, though this should work on Linux or Mac as well.
My particular brick was on purpose. It was based on the softbrick that can occur when using the root/Play store script by Ptiwee that is found here: http://forum.xda-developers.com/showpost.php?p=48739126&postcount=1
In this instance, if any part of the odex removal/replacement fails, you will be stuck in a bootloop. If you factory reset after being stuck, you complicate issues, because init is not able to complete & you then have an empty /data partition. This means that the fix differs depending on whether or not you did indeed perform a factory reset from the HDX recovery menu.
If you did perform a reset, then you need to do the following:
Download the HDX 8.9 root & follow jcase instructions from here: http://forum.xda-developers.com/showthread.php?t=2542456.
It will fail because the /data/local/tmp directory does not exist yet.
After completing these steps & failing, open cmd prompt & issue "adb shell" command.
Issue "su" command.
In the SU shell, issue the following set of commands:
mkdir /data
mkdir /data/local
mkdir /data/local/tmp
chmod 755 /data
chmod 755 /data/local
chmod 755 /data/local/tmp
adb shell
su
mount -o rw,remount /system
I then ran through the exploit from jcase again.
Then I opened a cmd window & did the following
adb root
adb shell
su
mount -o remount /system
This is where things get specific for my issue, which was the new services.odex that the ptiwee script installed.
for this issue, I opend a second terminal window & did the following:
adb push services.odex /data/local/tmp/services.odex
adb push DownloadProvider.odex /data/local/tmp/DownloadProvider.odex
adb push DownloadProviderUi.odex /data/local/tmp/DownloadProviderUi.odex
Now go back to your first cmd shell window & do the following (you may need to unplug the usb cable & quickly reinsert it):
adb shell
su
mount -o remount /system
exit
chmod 755 /data/local/tmp/services.odex
chmod 755 /data/local/tmp/DownloadProvider.odex
chmod 755 /data/local/tmp/DownloadProviderUi.odex
su
rm /system/framework/services.odex
cp /data/local/tmp/services.odex /system/framework/services.odex
chmod 755 /system/framework/services.odex
(for me on this issue, which was confirmed via logcat in Linux using Qtadb, the device screeen fully booted at this point, by itself)
However, you may need to also do this:
cp /data/local/tmp/DownloadProvider.odex /system/app/DownloadProvider.odex
cp /data/local/tmp/DownloadProviderUi.odex /system/app/DownloadProviderUi.odex
This would also apply to a modified build.prop bootloop. You would of course change the file you are move & chmod to build.prop & adjust the target directory accordingly.
My device is 100% working again & using this info, if you are stuck in a bootloop from changing, removing or whatever files, you should be able to similarly recover using a modified version of the data above.
Again, you really need to know what you were doing that caused the issue in the first place, but if you have a good idea what did it, then chances are you can recover.
Now hit thanks & let me know how you goofed up your device & we'll see if we can't fix it.
Click to expand...
Click to collapse
What should I do if I connect my kindle to PC without any reaction? I had done factory reset before. ADB cannot be recognized, nor do any special USB stuff. I thought mine got bricked for build.pro and I can just turn it to original recovey. Can you help me, please?
TOM XIE said:
What should I do if I connect my kindle to PC without any reaction? I had done factory reset before. ADB cannot be recognized, nor do any special USB stuff. I thought mine got bricked for build.pro and I can just turn it to original recovey. Can you help me, please?
Click to expand...
Click to collapse
Need more info & less quote. lol...
Does it turn on at all? What is on the screen? Is it lit, but looks like it's off? What EXACTLY did you change in the build.prop? Even a brick is usually recognized as SOMETHING when the device is attached (at least in Windows), so if nothing is being recognized, you may have an issue with PATH or just a finicky sdk installation. Are you on Windows or Linux?
GSLEON3 said:
Need more info & less quote. lol...
Does it turn on at all? What is on the screen? Is it lit, but looks like it's off? What EXACTLY did you change in the build.prop? Even a brick is usually recognized as SOMETHING when the device is attached (at least in Windows), so if nothing is being recognized, you may have an issue with PATH or just a finicky sdk installation. Are you on Windows or Linux?
Click to expand...
Click to collapse
Thank you for helping me! I followed this http://forum.xda-developers.com/showthread.php?t=2582773 and replaced buil.prop offered. I can turn it on by holding power button for several seconds and it showed the gray "kindle fire" logo for a few seconds,then turn off again.By the way,I am using win7 and I have no idea about PATH and sdk.
Tried, and failed... Since my kindle fire stopped at the sliver kindle fire screen and it reboots again and again, I can't even get the access to adb...
I think maybe I need to request a replacement from Amazon...Or someone could give me a usable System image and fastboot.exe.....
EDIT: Weird....After 10 minute's rebooting, my kindle suddenly works....Everything seems to be fine....
TOM XIE said:
Thank you for helping me! I followed this http://forum.xda-developers.com/showthread.php?t=2582773 and replaced buil.prop offered. I can turn it on by holding power button for several seconds and it showed the gray "kindle fire" logo for a few seconds,then turn off again.By the way,I am using win7 and I have no idea about PATH and sdk.
Click to expand...
Click to collapse
@TOM XIE If you used that build.prop provided in that thread, then you replaces yours with one meant for the 7" HDX. You need to download the update.bin from Amazon & extract it (it is just an archive zip). You will then have wht you need.
scx110a said:
Tried, and failed... Since my kindle fire stopped at the sliver kindle fire screen and it reboots again and again, I can't even get the access to adb...
I think maybe I need to request a replacement from Amazon...Or someone could give me a usable System image and fastboot.exe.....
EDIT: Weird....After 10 minute's rebooting, my kindle suddenly works....Everything seems to be fine....
Click to expand...
Click to collapse
Not weird at all. This will occasionally happen until the corrected changes make it into the Dalvik. Tense stuff I know, but jcase finding the device vulnerable to the master key #2 is a blessing in disguise. Hard for simple errors to really mess things up. Not saying go at it, but simple changes of most things (do not mess with bin, xbin or any of the basic systemui framewor-res) will not be a total loss.
Now I just need to take the time to decompile tiwee's Play Store mod & see if I can't find a typo or something amiss.
GSLEON3 said:
@TOM XIE If you used that build.prop provided in that thread, then you replaces yours with one meant for the 7" HDX. You need to download the update.bin from Amazon & extract it (it is just an archive zip). You will then have wht you need.
Click to expand...
Click to collapse
I have downloaded update.bin from Amazon. The most difficult part is that my kindle cannot be recognized as anything.
TOM XIE said:
I have downloaded update.bin from Amazon. The most difficult part is that my kindle cannot be recognized as anything.
Click to expand...
Click to collapse
Are you running Windows or Linux?
Also, do you have the Android SDK & the JDK installed.
Both of these are important steps. Also, was the device rooted & if you plug it into the USB port in a windows machine, do you see anything happen in Device Manager? It should fail to install the device (MTP) but if you have everything installed, you should try running it in a terminal directly in the sdk tools directory.
Also, have you updated your environmental or pam.environmental file as well in your bash file?
EDIT: I just went out on a limb again & I pushed the HDX7 build.prop to my device & rebooted. I was able to cp the repaired build.prop, so tell me everything you have done (what you tried & changed, modded or installed into system or root on the HDX) & check the above tips.
GSLEON3 said:
Not weird at all. This will occasionally happen until the corrected changes make it into the Dalvik. Tense stuff I know, but jcase finding the device vulnerable to the master key #2 is a blessing in disguise. Hard for simple errors to really mess things up. Not saying go at it, but simple changes of most things (do not mess with bin, xbin or any of the basic systemui framewor-res) will not be a total loss.
Now I just need to take the time to decompile tiwee's Play Store mod & see if I can't find a typo or something amiss.
Click to expand...
Click to collapse
Hope you good luck.... That's really a complex thing since Amazon did so many changes to the DownloadProvider....
May ask you a question? plz
GSLEON3 said:
Are you running Windows or Linux?
Also, do you have the Android SDK & the JDK installed.
Both of these are important steps. Also, was the device rooted & if you plug it into the USB port in a windows machine, do you see anything happen in Device Manager? It should fail to install the device (MTP) but if you have everything installed, you should try running it in a terminal directly in the sdk tools directory.
Also, have you updated your environmental or pam.environmental file as well in your bash file?
EDIT: I just went out on a limb again & I pushed the HDX7 build.prop to my device & rebooted. I was able to cp the repaired build.prop, so tell me everything you have done (what you tried & changed, modded or installed into system or root on the HDX) & check the above tips.
Click to expand...
Click to collapse
I have still brick my device my device is hdx7. My latop os window7.
Connect my kindle to laptop's usb port. My laptop is.shown qhsusb_bulk so i follow your step but
Not booting my device. Now i know my device 's system erase. Second step i connect nomal cable but shown unknown
MTP device. Plz help me. Do you know adb work? On my win7 laptop?
Or another method? Plz please help.me sorry for my english
cjdfyd2 said:
I have still brick my device my device is hdx7. My latop os window7.
Connect my kindle to laptop's usb port. My laptop is.shown qhsusb_bulk so i follow your step but
Not booting my device. Now i know my device 's system erase. Second step i connect nomal cable but shown unknown
MTP device. Plz help me. Do you know adb work? On my win7 laptop?
Or another method? Plz please help.me sorry for my english
Click to expand...
Click to collapse
Need to leave device alone for an hour or more while unpluged, no PC, no power.
After that hour, then press & hold the power button for 3 minutes, or until device starts. If it does not start into bootloap, then release the power button & let sit for a few minutes. Try to turn it on again.
Also, what did you do to the device? What did you mod, or change or add that caused the issue?
As for Windows, I have found that for adb to work on the HDX, you need to have the SDK installed & that sometimes it will not recognize the device from anywhere but the sdk folder.
Also, I had some issues getting some of the commands to work occasionally in Windows, which is why I choose to do these things in Linux.
GSLEON3 said:
@Poesini
Once you have it working, to the point of booting into the OS, grab the update.bin from Amazon (update-kindle-14.3.1.0_user_310079820.bin) here:
(still can't post links)
Once downloaded, grab a root level file explorer. I use the paid Root Explorer because it has built in root acess, a text editor & a ro/rw toggle button, but others should surely work. Make sure that the /System partition/directory is mounted as RW, then open the file build.prop & edit all the entries that say "310079820" to be"310079819".
You will find them in the build.prop as follows:
ro.build.version.incremental=14.3.1.0_user_310079820
ro.build.version.number=310079820
ro.build.description=apollo-user 4.2.2 JDQ39 14.3.1.0_user_310079820 release-keys
ro.build.fingerprint=Amazon/apollo/apollo:4.2.2/JDQ39/14.3.1.0_user_310079820:user/release-keys
Do not add the parenthesis, just change the last three number to 819 & then be sure to save the file. Open it again to ensure the edits were made, so you are certain that the device directory was indeed RW.
Again, I suggest copying the file to your PC as a backup, though you will have a copy in the downloaded update.bin (which is just a zip archive). I also suggest using a root explorer with a built in text editor, like Root Explorer.
Once this is done & you are certain the build.prop has been edited, copy the update.bin to the storage (sdcard) root & reboot the device.
Once the device has reboot, go into settings, device, system updates & select the install update button. Follow the directions & the device will reboot again & install the firmware. Any mods made to the System directory will be gone & everything should work again.
Click to expand...
Click to collapse
Tried using this method after the installation of gapps failed due to system directory being full (1gb)... I already gave up on this device until I saw this... Many Thanks! :highfive:
Thanks your answer and happy new year, i was wonder if could you help me?
GSLEON3 said:
Need to leave device alone for an hour or more while unpluged, no PC, no power.
After that hour, then press & hold the power button for 3 minutes, or until device starts. If it does not start into bootloap, then release the power button & let sit for a few minutes. Try to turn it on again.
Also, what did you do to the device? What did you mod, or change or add that caused the issue?
As for Windows, I have found that for adb to work on the HDX, you need to have the SDK installed & that sometimes it will not recognize the device from anywhere but the sdk folder.
Also, I had some issues getting some of the commands to work occasionally in Windows, which is why I choose to do these things in Linux.
Click to expand...
Click to collapse
my device is kindle 7", i had followed step Cpasjuste's http://forum.xda-developers.com/showthread.php?t=2577826 and i delete these files
"/system/app/amazonmp3_4010410.apk" -> amazon mp3 ..
"/system/app/Email_310006810.apk" -> email app, replaced by gmail which is currently broken !
"/system/app/Photos_7016610.apk" -> photos app
"/system/app/OfficeSuiteViewer.apk" -> office ..
"/system/app/S2Service.apk" -> something to do with cellular i think
"/system/app/Launcher-release-signed_81224610.apk" -> amazon launcher
"/system/app/AmazonWebViewLib_1109110.apk" -> slik browser
"/system/app/com.amazon.cloud9-platform_38038110.apk" -> amazon cloud/sync
and flashing he's gapps file. and then my device is bricked. it's shown grey kindle fire logo only, so i reboot many times but still shown kindle fire logo only.
So i install ubuntu my laptop, and follow your step jcase's file download on my computer.
but i don't know how next step? how open "su" file? by sdk? work on window os? or linux os? sorry for many question plz help me..and happy new year
Hello,
My kindle is bootlooping on the grey kindle and orange fire logo. This is a HDX 7.
I rooted, went a bit crazy with uninstalling kindle bloatware, screen went black, thought factory reset would do the trick, end up in bootloop.
My computer recognizes the kindle so what should I do?