Hi all,
Ok, so I finally managed to order a 16Gb Nexus 4 and hopefully it will be with me in 1 week or so.
And I was wondering one thing regarding the AC adapter: I believe (pls correct me if I am wrong) that the original AC adapter’s output voltage is DC 5V, 1.2A.
I will need an extra AC adapter to keep it at work and I was planning to use one of those:
- The Sony Xperia P AC adapter will output 5V, 1,5A
- The Samsung Galaxy S AC adapter will output 5V, 0,7A
It is clear that neither of those 2 chargers will match exactly the specifications of the original Nexus charger (same voltage, but different amperage).
So, here goes the questions:
1) Is there any problem if I use a charger that will output the same voltage but with different amperage?... if not, which one would you use and why?.
2) how the amperage affect to the charging process?.
Thanks all in advance
PS: sorry for terrible English
You can use any charger up to 2 amps.
Sent from my Nexus 4 using xda app-developers app
Evergreen74 said:
Hi all,
Ok, so I finally managed to order a 16Gb Nexus 4 and hopefully it will be with me in 1 week or so.
And I was wondering one thing regarding the AC adapter: I believe (pls correct me if I am wrong) that the original AC adapter’s output voltage is DC 5V, 1.2A.
I will need an extra AC adapter to keep it at work and I was planning to use one of those:
- The Sony Xperia P AC adapter will output 5V, 1,5A
- The Samsung Galaxy S AC adapter will output 5V, 0,7A
It is clear that neither of those 2 chargers will match exactly the specifications of the original Nexus charger (same voltage, but different amperage).
So, here goes the questions:
1) Is there any problem if I use a charger that will output the same voltage but with different amperage?... if not, which one would you use and why?.
2) how the amperage affect to the charging process?.
Thanks all in advance
PS: sorry for terrible English
Click to expand...
Click to collapse
You must use a 5V AC USB Adapter and better no LESS than 1A
for Fast Charge.
AC Adapter I Use:
iPad AC Adapter 5V 2.1A at Work
PlayBook AC Adapter 5V 1.8A at Home 1
Original Nexus 4 AC 5V 1.2A at Home 2.
Our Nexus 4 will Draw around 0.8A when Batt lever at 0% - 80%,
then around 0.5A at 80%-95%, Final State 95%-100% will draw 0.2A roughly.
When 100%, Nexus 4 will use the AC power & the Current "A" show on phone
will like 2mA (0.002A) when idling.
** 1A = 1000mA
As previous poster said, do not go under 1.2amp.
I run the OEM charger in my bed room, a USB charger to my computer, and a 2.1amp charger in the car.
Sfkn2 said:
As previous poster said, do not go under 1.2amp.
I run the OEM charger in my bed room, a USB charger to my computer, and a 2.1amp charger in the car.
Click to expand...
Click to collapse
Why do you say not to go under 1.2A? Charging from a laptop is at .5A. I've been using a 1A charger since day one. Haven't experienced any issues with it.
Charging at a lower amperage shouldn't hurt anything, just charge slower. All you have to do is make sure it's a 5V charger. Amperage shouldn't matter but a lower amp charger will charge slower. As for a higher amp charger, the phone will only draw the amount of power it needs to charge so using 2A charger won't hurt anything either.
Also 2mA is 0.002A not 0.02 A
wilsonlam97 said:
You can use any charger up to 2 amps.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Since the charger doesn't actually regulate the charging itself (the phone does this) it doesn't matter how many amps it can supply, could be 100 amps, no worries. As long as it is 5V, the phone will draw as many amps as it needs.
Since the supplied charger is 1.2A rated, it's fair to assume that the phone will never actually try to draw any more than that, so there will be no benefit in going higher.
Going for a lower current charger will likely extend the charge time.
I use a 2.1 amp daily without any issues.
Sent from my Nexus 4 using Tapatalk 2
Wow guys!!... thanks all for your answers!!
So, if I understood correctly, the amperage will only affect to the charging time, meaning that by using the Xperia P AC adapter (1,5A) the battery will be charged faster that using the Galaxy S one (0,7A)... right?
Pls allow one last question: a few yeard ago, I think I read in some forums that a slower charging process could help to keep the batteries in the best conditions for a longer time... is this still true with modern batteries??
Again, THANKS all for your help!!
Evergreen74 said:
Wow guys!!... thanks all for your answers!!
So, if I understood correctly, the amperage will only affect to the charging time, meaning that by using the Xperia P AC adapter (1,5A) the battery will be charged faster that using the Galaxy S one (0,7A)... right?
Pls allow one last question: a few yeard ago, I think I read in some forums that a slower charging process could help to keep the batteries in the best conditions for a longer time... is this still true with modern batteries??
Again, THANKS all for your help!!
Click to expand...
Click to collapse
Yes, the .7A charger will take a little longer to charge you phone.
On the other answer, I think NO but I'm not as familiar with LiPo batteries. I would venture to say that .7A vs 1.2A (max the phone will draw but I think someone above mentioned it's even less than that when the battery is very low) is not going to make a bit of difference in your battery life.
One thing I do know about LiPo's is you do not trickle charge them. So while plugged in it will charge at the rates mentioned above until full and then it QUITS charging all together. Once the phone discharges the battery to a certain level, it will charge it back up again. Probably at 98-99%.
There may be one other thing to consider when selecting a third party charger. In the Nexus 7, the device looks for pins 2 & 3 (data) of the USB plug to be shorted in order for it to draw full current. If this pins are open (or have a load across them as is the case with iPhone/iPad chargers), the Nexus 7 will assume it is plugged into a computer and limit its draw to 500MA.
Not certain the Nexus 4 behaves the same way but would assume so.
setzer715 said:
Yes, the .7A charger will take a little longer to charge you phone.
On the other answer, I think NO but I'm not as familiar with LiPo batteries. I would venture to say that .7A vs 1.2A (max the phone will draw but I think someone above mentioned it's even less than that when the battery is very low) is not going to make a bit of difference in your battery life.
One thing I do know about LiPo's is you do not trickle charge them. So while plugged in it will charge at the rates mentioned above until full and then it QUITS charging all together. Once the phone discharges the battery to a certain level, it will charge it back up again. Probably at 98-99%.
Click to expand...
Click to collapse
setzer715, thanks for the answer... I think I will be using the Xperia P charger at work...
Thanks all for your help!!
I want to make this case clear. According to my Charging log,
Here is some key point.
Nexus 4 Max Draw Rate at Fast Charge Mode is around 800-900mA,
even you use a Charger that rated at 1A (iPhone Tofu), 1.2A (Original),
1.8A (Playbook), 2.1A (iPad).
Fast Charge Mode must be with Charging Cable with 2&3 pin Shorted,
or the charger itself have the 2&3 pin already shorted.
Therefore, 1A is a Sweet spot for getting Charger & Charging Time for
Li-Po/Li-Ion/Ni-MH Batt charging.
If you use under 1A Charger, eg 700mA or 500mA, it will take much longer
to charge the batt but no harm as well. Just too slow only.
The stock charger that came with my phone sucks, I use one from my epic 4g touch (gs2)and it charges much better
DEVICE: Nexus 4
KERNEL: Franco r95
ROM: PROJECT Extinct Life Event
jlear3 said:
The stock charger that came with my phone sucks,
Click to expand...
Click to collapse
Why you say so...? What's wrong with it...?
Talon88 said:
Why you say so...? What's wrong with it...?
Click to expand...
Click to collapse
Left a phone on a charger all night with a long (10ft) cable and it couldn't even charge the phone over night. I know a 10ft cable will slow things down but my gs2 plug has no problem charging my phone. Search around and you'll find a few fail stories about the stock LG charger.
Sent from my Nexus 4 using Tapatalk 2
Related
Earlier I was nokia N86 user. Charger of that phone is same like SGS2. I charged my SGS2 with that charger. And I got the feeling that it was faster than original SGS2 charger.
Sent from my GT-I9100 using Tapatalk
Give us some data on charging timers pls.
Details please....
Ok will give it in few days. I'll start calculating it.
Will u need any screen shots? If yes than how I mean is der any way to calculate time directly on phone?
Sent from my GT-I9100 using Tapatalk
i have a nokia n97 mini charger which i use to charge my SGS2. It is indeed faster. But i guess it is because the nokia charger is capable of 1.2 A against only 0.7 A for the Samsung charger. Keep in mind that the voltage is the important number when matching chargers.
Both chargers are 5 V. Having higher A number means the charger is capable of giving out more power (power = V x A), power is energy rate (how much energy per second delivered). That is why Nokia's charger is faster, because it can give enery at a faster rate
fileexit said:
i have a nokia n97 mini charger which i use to charge my SGS2. It is indeed faster. But i guess it is because the nokia charger is capable of 1.2 A against only 0.7 A for the Samsung charger. Keep in mind that the voltage is the important number when matching chargers.
Both chargers are 5 V. Having higher A number means the charger is capable of giving out more power (power = V x A), power is energy rate (how much energy per second delivered). That is why Nokia's charger is faster, because it can give enery at a faster rate
Click to expand...
Click to collapse
The question is: is this gonna waste the samsung's battery?
I'm no battery expert but wouldn't samsung have selected the amp level for a reason??
666fff said:
I'm no battery expert but wouldn't samsung have selected the amp level for a reason??
Click to expand...
Click to collapse
Yes, Price been issuing an (I think 1amp) old htc charger. Not sure I notice a difference in charge speed, though its possible it still helps when running flash, oced etc by helping power the phone more so the battery isn't picking up the slack and can maintain charging without load. And no more amps can't hurt,a load will pull what it needs (more volts WOULD be am issue) Its like a 1200 watt pc power supply to run grandmas pentium computer wouldn't hurt it, just be under utilized. Make sense?
Sent from my GT-I9100 using XDA App
Are you surprised it charges faster? I'm socked that my SGSII charger only throws out 700mA.
What are they playing at giving "travel charger" in the box?
The charge speed is directly related to the current output of the charger in use, as long as the phone is designed to accept a current higher than the lowly 700mA the standard one outputs.
With a 1A charger you should get (in theory) ~43% faster charging, assuming the phone and battery can draw that much current to charge.
Let's hope the phone supports this:
In Battery Charging Specification,[38] new powering modes are added to the USB specification. A host or hub Charging Downstream Port can supply a maximum of 1.5 A when communicating at low-bandwidth or full-bandwidth, a maximum of 900 mA when communicating at high-bandwidth, and as much current as the connector will safely handle when no communication is taking place; USB 2.0 standard-A connectors are rated at 1.5 A by default. A Dedicated Charging Port can supply a maximum of 1.8 A of current at 5.25 V. A portable device can draw up to 1.8 A from a Dedicated Charging Port. The Dedicated Charging Port shorts the D+ and D- pins with a resistance of at most 200 Ω. The short disables data transfer, but allows devices to detect the Dedicated Charging Port and allows very simple, high current chargers to be manufactured. The increased current (faster, 9 W charging) will occur once both the host/hub and devices support the new charging specification.
Click to expand...
Click to collapse
Would make charging insane.
I didnt understand whatever kani has quoted.
Plz somebody tell me is it safe to charge or not?
Sent from my GT-I9100 using Tapatalk
Havent done any test but my old blackberry charger, charges the phone faster. Anything is faster than the stock charger.
Sent from my GT-I9100 using XDA App
Hmm im interested in this thread, somebody with an electrical background should chime in on if its totally safe or not to use a charger with more current output.
I don't know if you european guys have different chargers than us, this is what mine reads.
input 100-240v- 50-60hz 0.15a
Output 5.0v 1.0A
unleashed12 said:
Hmm im interested in this thread, somebody with an electrical background should chime in on if its totally safe or not to use a charger with more current output.
I don't know if you european guys have different chargers than us, this is what mine reads.
input 100-240v- 50-60hz 0.15a
Output 5.0v 1.0A
Click to expand...
Click to collapse
Mine says
"Input 100-240v- 50-60hz 0.15A
Output 5.0v 0.7A"
So yes, guess we do have different chargers
So i guess then NA has the theoretical 50% higher charging rate @ 1.0 A that one other guy was mentioning earlier; i was wondering because i really feel that my charge time on this phone isn't slow at all. Was looking to possibly make it faster even
Me too i saw a quickly charge with n97 charger.
But, with the original one, you gain like 1/2 hours of autonomy.
Quick charger = less time to charge the buttery but less time on battery
Slow charger = more time to charge buttery but more time of autonomy
The best should be charging the phone in offline mode using the computer
Mine says
Input : 150-300vac
50 - 60Hz 0.15A
output :5.0V 0.7A
Sent from my GT-I9100 using Tapatalk
And On nokia charger
Input : AC100-240V/50-60HZ/160mA
output: DC 5.0V/1200mA
Sent from my GT-I9100 using Tapatalk
I think it should be fine, i used another charger on my old HD2 for most of the time i had it (a year and a half) after i lost the original and never had any issues.
So can someone give a list of what chargers would charge the phone faster than the one that came with it.
thanks
The phone apparently limits the charging current to 650mA no matter the charger. Not sure I'd want to be the one testing increasing the cap though
http://forum.xda-developers.com/showthread.php?t=1132649&highlight=Charging
Hello,
Just noticed that S4 comes with 2A charger while S3 come with 1A charger. I have place where I charge a bunch of different devices in the house which has micro-USB port and all of them are using 1A. I'm wondering what repricussions I can have if I add 2A charger to the mix and will charge old devices with 2A charger and vice a versa charge S4 with 1A?
artisticcheese said:
Hello,
Just noticed that S4 comes with 2A charger while S3 come with 1A charger. I have place where I charge a bunch of different devices in the house which has micro-USB port and all of them are using 1A. I'm wondering what repricussions I can have if I add 2A charger to the mix and will charge old devices with 2A charger and vice a versa charge S4 with 1A?
Click to expand...
Click to collapse
It will be fine, I charge all my devices from my ipad 3 10W/2A @5V wall charger. Bringing one charger while travelling reduces the clutter I have to pack.
Basically if your devices are working properly, they will only pull the power they need to charge. The S4's 2A charger is capable of supplying up to 2A's but is fine supplying less if the device your charging uses less.
The actuall charging circuitry that controls the battery charging is in the phone or device, not the wall unit. The wall unit is simply the power supply.
As acruxksa mentioned, you'll be fine since the device is in control of how much power it pulls from the charger (as long as it is working properly, that is). The only thing that you may notice is when you are charging the Galaxy S4 with the older 1.0A charger it may charge slower.
Have a great day.
krsskenn said:
As acruxksa mentioned, you'll be fine since the device is in control of how much power it pulls from the charger (as long as it is working properly, that is). The only thing that you may notice is when you are charging the Galaxy S4 with the older 1.0A charger it may charge slower.
Have a great day.
Click to expand...
Click to collapse
And if in doubt, look at it this way; the phones will charge off a USB port on a computer - this is 500ma (0.5A) - so as long as your device will charge off a usb port, it will charge off a wall charger that supplies at least that much amperage. New iPads will not charge off USB ports, but it doesn't hurt them to plug them in.
Charging time
artisticcheese said:
Hello,
Just noticed that S4 comes with 2A charger while S3 come with 1A charger. I have place where I charge a bunch of different devices in the house which has micro-USB port and all of them are using 1A. I'm wondering what repricussions I can have if I add 2A charger to the mix and will charge old devices with 2A charger and vice a versa charge S4 with 1A?
Click to expand...
Click to collapse
Yes it does but as the previous reply said it takes longer.
I used the old s3 cable at the office charging s4 but it takes long time to get the battery % up. It usually takes my s4 from 1% to 100% within an hour and half time but with the s3 cable it takes good 3 -4 hour or so.
I wouldn't take the s3 cable for travelling though. it will take too long for me to charge in coffee shops and what not when I am moving around the destinations.
So far, I am very impressed with the charging time of S4.. Love the device.
acruxksa said:
It will be fine, I charge all my devices from my ipad 3 10W/2A @5V wall charger. Bringing one charger while travelling reduces the clutter I have to pack.
Basically if your devices are working properly, they will only pull the power they need to charge. The S4's 2A charger is capable of supplying up to 2A's but is fine supplying less if the device your charging uses less.
The actuall charging circuitry that controls the battery charging is in the phone or device, not the wall unit. The wall unit is simply the power supply.
Click to expand...
Click to collapse
I don't understand why all current control is on device itself why not manufacturers just suppl 3A chargers for all the phones since it can be used for any device out there.
alphadog00 said:
And if in doubt, look at it this way; the phones will charge off a USB port on a computer - this is 500ma (0.5A) - so as long as your device will charge off a usb port, it will charge off a wall charger that supplies at least that much amperage. New iPads will not charge off USB ports, but it doesn't hurt them to plug them in.
Click to expand...
Click to collapse
That's how I rationalized using my One S chargers
---------- Post added at 08:52 PM ---------- Previous post was at 08:43 PM ----------
artisticcheese said:
I don't understand why all current control is on device itself why not manufacturers just suppl 3A chargers for all the phones since it can be used for any device out there.
Click to expand...
Click to collapse
Good question. Maybe because the higher amp batteries have not been out that long compared to all the years smartphones have been sold. They may start making 3A only. Also, companies may sell less chargers if one size fits all. No need to buy a new one when you change phones.
I do know when I charge the S4 with my One S charger it does take longer, as mentioned, and very slow off USB. The One S charger end also gets somewhat warm charging the S4. The S4 charger does not. That would lead me to believe it is pulling a little more current than charger was designed for. But, probably not an issue. USB does not get warm. But, is a good quality one and heavily shielded.
artisticcheese said:
I don't understand why all current control is on device itself why not manufacturers just suppl 3A chargers for all the phones since it can be used for any device out there.
Click to expand...
Click to collapse
In case someone buys a 10amp cheap charger and ends up frying the phone. Thus Samsung protects it self from dummy users and from million dead phones warranty swaps.
I'm using a USB car charger that puts out 2.1amps and its super fast. USB 2.0 on my laptop takes a while to charge it. Some times I use iPhone charger with Nokia cable or with WD hard drive USB wire. They all work just fine but charge at different rate.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
artisticcheese said:
I don't understand why all current control is on device itself why not manufacturers just suppl 3A chargers for all the phones since it can be used for any device out there.
Click to expand...
Click to collapse
The bigger the charger, more expensive it is. Manufacturers want to save money.
Wow. Way to necro this thread...
Necro--
Damn, thank goodness for Urban Dictionaries for OLD farts--
Had to look that one up
so if i will charge my S3 with a 2A charger i wont see any major change from the 1A, correct? I have the Boeffala kernel and at the AC charge is set to 1,1A so if i have a 2A charger i guess it should charge faster.
The phone will only draw the maximum it can. The 2A charger will charge it at the same speed as the 1A charger.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Red_81 said:
The phone will only draw the maximum it can. The 2A charger will charge it at the same speed as the 1A charger.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Maybe it is a placebo effect, but when I charge my S3 with my S4's charger it does seem faster. Quite a few of my coworkers that have used my S4 charger at work also thought it charged faster.
Either way I have charged my S3 with it very often with no I'll effects, so OP you should be safe to do so.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
Install battery monitor widget and you will be able to see how much it's pulling on each charger
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
I have a question regarding chargers and the amps they put out.
While the stock wall charger is a 1amp charger, will a 2.1A charger damage the battery in my Nexus 4? I know 2.1 is usually for tablets, portable gaming systems, but does it damage our cell phone batteries, or just charge them faster?
thanks
mzeigler1 said:
I have a question regarding chargers and the amps they put out.
While the stock wall charger is a 1amp charger, will a 2.1A charger damage the battery in my Nexus 4? I know 2.1 is usually for tablets, portable gaming systems, but does it damage our cell phone batteries, or just charge them faster?
thanks
Click to expand...
Click to collapse
2.1A just means it _can_ output a maximum of 2.1A
But the Phone itself will "decide" how much current it draws for charging.
So no need to worry, it will not damage the battery. But it will very likely also not charge it faster.
I myself also used different chargers including the higher amp one from the Nexus 7.
so
You saw no difference in charging time compared to the 1 amp charger?
mzeigler1 said:
You saw no difference in charging time compared to the 1 amp charger?
Click to expand...
Click to collapse
I did not specifically think about it...I can test some other time right now my phone is fully charged.
But I guess the charger is adopted to the maximum charge current the phone can use.
I believe the phone can pull more than 1A if the charger is capable of delivering a higher amperage
Sent from my Nexus 4 using xda app-developers app
Thanks for the help guys! It worked.
Hello.
I lost my Nexus 4's charger, Is it okay for the battery to charge it (for a whole night) with iPhone 6's adapter?
Wassupdog said:
Hello.
I lost my Nexus 4's charger, Is it okay for the battery to charge it (for a whole night) with iPhone 6's adapter?
Click to expand...
Click to collapse
If the voltage difference is not high u can charge
slogger001 said:
If the voltage difference is not high u can charge
Click to expand...
Click to collapse
Nexus 4's (from Google):
The input voltage range between the wall outlet and this travel adapter is AC 100V– 240V, and the travel adapter’s output voltage is DC 5V, 1.2A.
And I have another charger that says 5V2A, is it too much or can I charge with it?
How can I know what is the voltage of the iPhone's charger?
Thanks .
Wassupdog said:
Nexus 4's (from Google):
The input voltage range between the wall outlet and this travel adapter is AC 100V– 240V, and the travel adapter’s output voltage is DC 5V, 1.2A.
And I have another charger that says 5V2A, is it too much or can I charge with it?
How can I know what is the voltage of the iPhone's charger?
Thanks .
Click to expand...
Click to collapse
It's 5V. Anything USB will be 5V. Don't worry about too much amperage. The phone's internal circuitry will limit/regulate how much juice actually reaches the battery. I use a 2A charger on my Nexus 4 all the time.
Planterz said:
It's 5V. Anything USB will be 5V. Don't worry about too much amperage. The phone's internal circuitry will limit/regulate how much juice actually reaches the battery. I use a 2A charger on my Nexus 4 all the time.
Click to expand...
Click to collapse
Thanks .
So if I will charger my Nexus with the iPhone charger and it is 2A it won't charger my phone faster?
The phone will allow only 1.2A?
Wassupdog said:
Thanks .
So if I will charger my Nexus with the iPhone charger and it is 2A it won't charger my phone faster?
The phone will allow only 1.2A?
Click to expand...
Click to collapse
It might charge faster. I honestly don't know, nor do I know what the max amperage/speed the Nexus 4 charges with. Heck, I don't even know what the stock Nexus 4 charger was, since I got my N4 second-hand. Come to think of it, I should do some tests, just for future reference. I think I only have .7A, 1.8A, and 2A chargers though (the latter 2 being for tablets).
Any one Disappointed with the charger they included with the Pure. The non removable cord just sucks and a poor choice in my opinion
I'm more disappointed at the size of the wall wart. They could have made more friendly to other power strip users.
razor237 said:
Any one Disappointed with the charger they included with the Pure. The non removable cord just sucks and a poor choice in my opinion
Click to expand...
Click to collapse
Pretty sure they did that so you couldn't just stick any usb charging cord in their...it'd most likely fry it.
The disappointing part is the my other cords not working with Android auto. Luckily I have a nexus 6, and the cord with its charger works.
Sent from my P01MA using Tapatalk
brholt6 said:
Pretty sure they did that so you couldn't just stick any usb charging cord in their...it'd most likely fry it.
Click to expand...
Click to collapse
I guess that could be a reason but highly doubt anything would be fried. Ive been using a nexus 6 turbo charger and before that i was using a note 4 charger to charge multiple android/apple devices without issue. This just limits what i can charge on a single charger now need a second lol
razor237 said:
I guess that could be a reason but highly doubt anything would be fried. Ive been using a nexus 6 turbo charger and before that i was using a note 4 charger to charge multiple android/apple devices without issue. This just limits what i can charge on a single charger now need a second lol
Click to expand...
Click to collapse
If you plugged in a charging cord that can't handle the increased power it sure could fry the cord. I feel ya though...it would be nice if it were a USB cord.
I'm glad it looks different.... My son knows NOT to plug his HTC M7 into this charger.
I can see if this was someones first Android, the lack of a micro-USB for data would be frustrating, but I have about 5 of these in my desk drawer and throughout my house and office, so it doesn't bother me.
Also having a fixed cord means you don't pulg some 'slow' cable in and not get any benefits. Out my 8-10 micro USB cables, only 2-3 get a decent charge speed.
tele_jas said:
I'm glad it looks different.... My son knows NOT to plug his HTC M7 into this charger.
I can see if this was someones first Android, the lack of a micro-USB for data would be frustrating, but I have about 5 of these in my desk drawer and throughout my house and office, so it doesn't bother me.
Click to expand...
Click to collapse
If a device that does not do Turbo Charging is connected, the charger should automatically adjust and charge it at regular speed. At least, that's what it is supposed to do. The Turbo Charger is supposed to be the single charger for all types.
Sent from my Nexus 10 using Tapatalk
Darnell_Chat_TN said:
If a device that does not do Turbo Charging is connected, the charger should automatically adjust and charge it at regular speed. At least, that's what it is supposed to do. The Turbo Charger is supposed to be the single charger for all types.
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
Good, because I know I'll find his phone on that charger some day
I still have my galaxy s6 nexus charger that is a fast charging and it seems to work fine with turbo charging
Sent from my LG-H345 using XDA Free mobile app
I think the reason they made the cable fixed is because a lot of cheaper usb cables use very thin wire gauges. Since this charger puts out a lot of current at varying voltages, it's very possible for a thin cable to overheat easier and catch on fire. And my guess is, they didn't want to take any chances
How do we determine if turbo charger is ongoing? I mean are there any indication? Coz when I plug in the TurboCharger that comes with it, sometimes TurboPower Connected shows at the bottom of the screen, sometimes not. Then when I check it on the Status, it says Charging over USB, not Charging over AC? Could be that my unit is defective? perhaps the charger? or the battery?
DrearierJester1 said:
How do we determine if turbo charger is ongoing? I mean are there any indication? Coz when I plug in the TurboCharger that comes with it, sometimes TurboPower Connected shows at the bottom of the screen, sometimes not. Then when I check it on the Status, it says Charging over USB, not Charging over AC? Could be that my unit is defective? perhaps the charger? or the battery?
Click to expand...
Click to collapse
I've got the same issue going on. My replacement from Amazon will be here Tuesday so I'll have time to mess with both and see if its the charger or what. Currently my turbocharging is hit or miss.
DrearierJester1 said:
How do we determine if turbo charger is ongoing? I mean are there any indication? Coz when I plug in the TurboCharger that comes with it, sometimes TurboPower Connected shows at the bottom of the screen, sometimes not. Then when I check it on the Status, it says Charging over USB, not Charging over AC? Could be that my unit is defective? perhaps the charger? or the battery?
Click to expand...
Click to collapse
I have this issue sometimes to. So if I need to know if im charging at turbo I use an app from the app store to see if states I'm turbo Charging or not. In the Charging screen it will say "normal or Turbo"
https://play.google.com/store/apps/details?id=com.gombosdev.ampere
DrearierJester1 said:
How do we determine if turbo charger is ongoing? I mean are there any indication? Coz when I plug in the TurboCharger that comes with it, sometimes TurboPower Connected shows at the bottom of the screen, sometimes not. Then when I check it on the Status, it says Charging over USB, not Charging over AC? Could be that my unit is defective? perhaps the charger? or the battery?
Click to expand...
Click to collapse
You can use a USB voltage/current indicator device to see it directly. I use one that displays voltage and current simultaneously, it cost about $10 on Amazon.
The Qualcomm QC 2.0 (which Motorola terms "TurboPower) spec is 5, 9, 12, and 20 volts, with up to 2 amps plus at each voltage. The QC 2.0 chargers I've tested including the Motorola charger included with the XT1575, range up to 9V and about 2+ A at 9V, with the higher voltage/amperage when battery is discharged to a lower SoC.. Haven't seen 12V or 20V, I think those only come into play when battery is discharged to nearly zero SoC.
Agree the reason the included charger has cable attached may be to ensure adequate wire gage. Too-thin wire will increase voltage drop across cable thus lengthening charge time in higher power modes. But the design here uses higher voltage to keep current down around the same 2A max current of USB 2.0 chargers, so cable heat will not be a problem with any old USB cable.
I will attest to the benefit of QC 2.0. I thought it was a useless gimmick until I started using it. It does effectively compensate for mediocre battery capacity.
My "Turbo Charging" icon displays properly, but doesn't charge very quickly if connected to a cheap extension cord.
Plugged into the wall, the charging Stull doesn't impress me that much
Sent from my XT1575 using Tapatalk
DrearierJester1 said:
How do we determine if turbo charger is ongoing? I mean are there any indication? Coz when I plug in the TurboCharger that comes with it, sometimes TurboPower Connected shows at the bottom of the screen, sometimes not. Then when I check it on the Status, it says Charging over USB, not Charging over AC? Could be that my unit is defective? perhaps the charger? or the battery?
Click to expand...
Click to collapse
It's defective. Call moto they will replace it for free. Just have to send copy of purchase receipt. Had the same issue.
The charge rate depends on how discharged the battery is when connected to charge.
More discharged (lower SoC, State of Charge) will drive a higher charge rate.
As to the difference between this Motorola TurboPower (aka Qualcomm Quick Charge 2.0), vs. other phones:
I've measured up to 1.4 amps at 5V nominal on other phones, that is about 9 watts charging power. That is max charge rate, with a very discharged battery. As the battery charges up closer to fully charged, the charge rate (power) is reduced. Total charging time from fully discharged to fully charged would be about 4-5 hours, give or take, for a typical cellphone battery.
For comparison, the QC 2.0 measurements I made with the MXPE: Up to 2.2 amps at 9V nominal with a phone battery discharged to about 40-50%. That works out to about 20 watts charging power. As with other Li-Ion battery charging systems, this also declines as the battery approaches fully charged. Total time to charge, from fully discharged to fully charged will be about 2-3 hours, give or take.
So the marketing claims about QC 2.0 are about right: A 75% improvement over conventional charging systems.
The biggest gains come when charging batteries discharged to lower SoC. If you are comparing charge rate/time of batteries discharged to only, say, 70-80%, you will not see as much of a difference with QC 2.0.
I'm not a QC 2.0 marketing shill, mind you. I pretty much ignored it, before buying the phone. But for this phone, QC 2.0 actually does a good job to compensate for the mediocre battery. I can run the battery down to 40-50%, put it on QC 2.0 charger in my car for my 30 minute commute, and it is charged to around 80+% when I arrive at my destination. There are a lot of QC 2.0 certified aftermarket chargers out there too, Qualcomm did a lot of work on the front end as part of bringing it to market. (Just make sure any AC charger is UL listed or equivalent, if you care about safety.
Caveats on cables: The cable does make a difference at higher charge rates. Thinner gage wire will impose a greater voltage drop at higher current, this will reduce power and thus increase charge time.
Typical USB cables are AWG 26-28. You can buy 20, 22, and 24 AWG USB cables. Some cables advertise heavier (22-24) gage wire for the power leads with standard (26-28) gage wire for the data leads. The aftermarket QC 2.0 AC chargers I bought listed their included cables as 20 gage.
Get the heavier gage if you want full QC 2.0 charging.
soufdallas said:
I still have my galaxy s6 nexus charger that is a fast charging and it seems to work fine with turbo charging
Sent from my LG-H345 using XDA Free mobile app
Click to expand...
Click to collapse
Just to check did you use S6 original charger ? And does it charge same with the turbo power charger provided by moto?
Sent from my Moto X Pure (2015) via Tapatalk