[Q] (HELP) 4.2.2 Nexus 7 3g Assert Failed - Nexus 7 Q&A, Help & Troubleshooting

Before i get to the point of this thread here's some useful information you may want to know:
- I have a Nexus 7 3g (Tilapia) Device
- Bootloader is UNLOCKED
- Im ROOTED
- Im Running Stock Rom with Custom Kernel ( m-motley kernel (a36))
- I have Beats Audio Driver *root Installed - (I think this is the Problem But am not sure)
Ok so im trying to update my nexus 7 3g from 4.2.1 to 4.2.2. When i try flashing the official update zip using CWM v.6.0.2.3 i get an error during the installation saying:
****************************************************************************************************************************************************
- - Installing: /sdcard/0/357318e165a8.signed-nakasig-JDQ39 - from- JOP40D. 357318e1.zip
Finding update package...
Opening update package...
Installing Update...
Verifying current system...
assert failed: apply_patch_check ("/system/lib/libSR_AudioIn.so", "bcc09f67f497c6a6edece202942bc4c45f712f62", "85eeeb97d102a3f6656e58cb25ad97bbe29ec613")
E: Error in /sdcard/0/357318e165a8.signed-nakasig-JDQ39 - from- JOP40D. 357318e1.zip
(Status 7)
Installation Aborted.
***************************************************************************************************************************************************
So i basically need help on how to get by this problem so that i can flash the Official 4.2.2 Image from Google.
So can anyone help me?

leont1280 said:
So can anyone help me?
Click to expand...
Click to collapse
Yes.
You can help yourself.
Search for "Status 7" in this forum. Plenty of recent reports and solutions offered to the endless parade of people that think that OTAs are meant for updating customized (non-Stock) devices.
Bottom line is that the beginning of the trouble is listed in the very error message that you reported - that sometime between the time you rooted and now,
/system/lib/libSR_AudioIn.so
got modified or removed.
Note that there is NOT a single "Status 7" problem - there are hundreds of files (and the boot or "kernel" partition too!) which are checked for correctness before the OTA begins. If the OTA finds a problem with any of them, it bails out without having touched a single thing in your modified ROM. That also means that there could be more problems with your ROM (including use of a custom kernel) which will cause the OTA to fault out until they are corrected.
Anyhow, vast amounts of hot air have already been expended on this - use the forum's search feature, and start reading.

Related

problem with update froyo original vodafone EPF30

I have a prejudice google nexus original one I tried vodafone EPF30
since the OTA update did not come to the nexus is one of Frøya
by check in the code or through manual update, but there was
nothing to do the upgrade in both cases is not aborted
I understand why.
through check-in download the update occurs smoothly,
but when it goes to install the toolbar update stops in the middle '
appears and the android with the triangle and exclamation point and then nothing
more.
however, if you carry some manual dell'update the error
shows:
E: cant't open / cache / recovery / command
verifyng current system
Assert failed: apply_patch_check ......
E: Error in / SDCard / update.zip (status 7)
Installation aborted
PLEASE HELP ME I DO NOT KNOW HOW TO DO!
http://member.america.htc.com/download/RomCode/Source_and_Binaries/signed-passion-img-0713_FRF91.zip
Rename to passing.zip and load via bootloader. I dunno what derivative that one is, I assume the US one though.
Thank you I know because my Vodafone N1 and 'Italian works even if the steps on my device.
I remind you that my one and nexus' original mounts as the build EPF30.
Thank you

How to Update to official Gingerbread if you have a Status 7 error

I have seen a few people have questions about updating to the official Gingerbread, but getting the following:
Finding update package...
Opening update package...
Verifying update package...
Installing update...
Verifying current systems...
assert failed: apply_patch_check("/system/fonts/DroidSans-Bold.ttf", "560e4bcafdebaf29645fbf92633a2ae0d2f9801f", "ada4e79c592f3c54546b7587b48f2b232d95ce2f")
E:Error in /cache/Blur_Version.4.1.83.MB860.ATT.en.US.zip
(Status 7)
Installation aborted
If you have rooted, then tried to un-root the phone and get the above error there is an easy Hardwire upgrade option without having to RSD to a lower firmware, then updating. If your OTA/SD card option doesnt work, go to the following Moto site to hardwire update. It takes about 25 minutes, but will work easily.
http://www.motorola.com/consumers/v/index.jsp?vgnextoid=9098bc50a569f210VgnVCM10000081bbb00aRCRD
iceman4357 said:
I have seen a few people have questions about updating to the official Gingerbread, but getting the following:
Finding update package...
Opening update package...
Verifying update package...
Installing update...
Verifying current systems...
assert failed: apply_patch_check("/system/fonts/DroidSans-Bold.ttf", "560e4bcafdebaf29645fbf92633a2ae0d2f9801f", "ada4e79c592f3c54546b7587b48f2b232d95ce2f")
E:Error in /cache/Blur_Version.4.1.83.MB860.ATT.en.US.zip
(Status 7)
Installation aborted
If you have rooted, then tried to un-root the phone and get the above error there is an easy Hardwire upgrade option without having to RSD to a lower firmware, then updating. If your OTA/SD card option doesnt work, go to the following Moto site to hardwire update. It takes about 25 minutes, but will work easily.
http://direct.motorola.com/hellomot...SoftwareUpdateforATTATRIX4Gversion.4.5.91.pdf
Click to expand...
Click to collapse
this link brings you to the motorola store... (just a heads up)
I was getting the same error when trying to update. After I went in and 'defrosted' everything - my unlocked Atrix updated without a problem.
robwscott83 said:
this link brings you to the motorola store... (just a heads up)
Click to expand...
Click to collapse
Thanks, link updated. Use Automatic update on the right.
attempted to hardware install same result.
antbeats said:
attempted to hardware install same result.
Click to expand...
Click to collapse
by hardware do you mean via the SD card or the hard wire cable? You wanted to use the "Automated Update".

Applying 4.08.605.2 update & going to recovery

Sorry for bothering, but I haven't been able to find this particular issue, or at least this issue being referred to somewhere on the site.
I have an HTC Incredible on Verizon and have the 2.3.4 4.06.605.3 update applied. It was causing me a number of issues, so used Scotty1223's thread to back it down and gain root and S-Off on the phone. I played around with a couple of ROMs, but when they came out with this new update I wanted to get back to stock.
I restored my initial nandroid backup on the system thinking that would be enough. The update did not take on the phone. I saw that you have to have the stock recovery so I went to pvillecomp.com and put the stock HTC recovery back on the phone. So it is now running with Stock Recovery & the original 2.3.4 4.06.605.3 software on it. FYI, the Radio that appears to be on it, is Baseband version: 2.15.00.07.28 which is where my S-Off is if memory servers so I haven't messed with it yet, and don't know if that is my issue. I don't have the ability to do a screen shot with this software, but will happily provide any additional information that might be requested.
Ok. when I attempt to apply the new patch it reboots the machine, I get the green progress bar, and it goes maybe 1/3 of the way across then I get the Recovery screen. By hitting the Volume Up + Power I get the recovery information which says:
Finding update package...
Opening update package...
Verifying update package...
Installing update...
assert failed: check_cid(getprop("ro.cid"). "00000000" , "11111111" , "22222222" , "33333333" , "44444444" , "55555555" , "66666666" , "77777777" , "88888888" , "99999999" , "VZW__001") == "t"
E:Error in /cache/6cad8272f75b.OTA_Incredible_C_Gingerbread_S_VERIZON_WWE_4.08.605.2-4.06.605.3_release_222219.zip
(Status 7)
Installation Aborted.
There it just sits until I reboot it.
Thanks for your time.
Alex
absamide said:
Sorry for bothering, but I haven't been able to find this particular issue, or at least this issue being referred to somewhere on the site.
I have an HTC Incredible on Verizon and have the 2.3.4 4.06.605.3 update applied. It was causing me a number of issues, so used Scotty1223's thread to back it down and gain root and S-Off on the phone. I played around with a couple of ROMs, but when they came out with this new update I wanted to get back to stock.
I restored my initial nandroid backup on the system thinking that would be enough. The update did not take on the phone. I saw that you have to have the stock recovery so I went to pvillecomp.com and put the stock HTC recovery back on the phone. So it is now running with Stock Recovery & the original 2.3.4 4.06.605.3 software on it. FYI, the Radio that appears to be on it, is Baseband version: 2.15.00.07.28 which is where my S-Off is if memory servers so I haven't messed with it yet, and don't know if that is my issue. I don't have the ability to do a screen shot with this software, but will happily provide any additional information that might be requested.
Ok. when I attempt to apply the new patch it reboots the machine, I get the green progress bar, and it goes maybe 1/3 of the way across then I get the Recovery screen. By hitting the Volume Up + Power I get the recovery information which says:
Finding update package...
Opening update package...
Verifying update package...
Installing update...
assert failed: check_cid(getprop("ro.cid"). "00000000" , "11111111" , "22222222" , "33333333" , "44444444" , "55555555" , "66666666" , "77777777" , "88888888" , "99999999" , "VZW__001") == "t"
E:Error in /cache/6cad8272f75b.OTA_Incredible_C_Gingerbread_S_VERIZON_WWE_4.08.605.2-4.06.605.3_release_222219.zip
(Status 7)
Installation Aborted.
There it just sits until I reboot it.
Thanks for your time.
Alex
Click to expand...
Click to collapse
You will need to do an ruu to 4.06.605.3 as a PB31IMG.zip thru hboot. Then boot the phone and it should prompt you to update to 4.08.605.2
Or you could just put clockwork recovery back on the phone and flash Wildstangs stock ota 4.08.605.2 rom found in the dev section. It is compleete stock except for being rooted and deodexed.
Thanks, that is what I was afraid I was going to be told. I was hoping not to have to rebuild everything to get a nice solid backup.
I appreciate the information.
Alex.

[Q] European U8860, Honor: Update always fails

I bought the European Huawei U8860 (Honor) some days ago.
My previous phone was a HTC Hero that has served me for several years. When I first got that one I rooted it and
got a quite good ROM onto it no problem, but my new Honor doesn't seem to be as "willing."
I would like to acchieve root, and a good stable, standard android rom with as little extra bloatware as possible.
The rom that was bundeled with it is nice and stable, but it's full of Huawei's "essential applications" whom I'm not to found of.
Therefore I thought I could root it and remove all the unnecessary stuff, but I haven't found any way that works.
After trying to root the bundeled rom I switched to upgrading to the official ICS released by Huawei, because it's supposed to be easier to root. It's not working either.
Here's what I've tried in detail:
* I've tried flashing the small UPDATE.APP that's supposed to let you root it with SuperOneClick, it unpacks and then fails showing a yellow warning symbol.
In the log I can read this:
Code:
Failure: OSBL°æ±¾Æ¥Åäʧ°Ü.dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!
* I've used SuperOneClick, it connects fine and interacts with the phone correctly but for some reason it hangs at
"step 7" Afterwards the phone isn't rooted.
* I've downloaded and tried updating to the "Cambodian ICS demo" found at Huawei's international site.
It fails in the same way as the UPDATE.APP. "dload/sd_update.log" reads
Code:
Failure: OSBL°æ±¾Æ¥Åäʧ°Ü.dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!
afterwards.
My SDcard is formatted in FAT32. The update program finds the update files and unpacks them.
Then as it's about to start installing, it fails.
Some of my theories:
Something wrong with my SDcard? Seems unlikely since my phone can read and write it fine and the updateprogram even manages to unpack the update.
Some sort of certificate problem? Are the updates signed in some way?
I've never seen anyone with my buildnumber (see below). Could it be that Huawei has some extra upped security in my version of the rom?
System information:
Android version: 2.3.6
Build number: U8860V100R001EURC00B875
Kernel:2.6.35.7-perf, [email protected]#1
I figured that this would be the best fit for questions about the Huawei Honor U8860. If I'm wrong, please move the post.
Any help figuring this out will be greatly appreciated!
Same problem
Hello
Did you ever discover a solution to this problem?
I am encountering the exact same thing, regardless of the method i use for upgrading and the upgrade i use, it always fails.
This happens both with custom and official updates.
Happens to me, too. Have B932 on my Honour, ran stable for a couple of weeks. Then suddenly while using it for 3 hours with a GPS navigator it crashed 2 times and after the 2nd crash it does not reboot anymore. Is cought in a bootloop. Get the same error when I try to flash another ROM. I think I will have to give it to the vendor for warranty.
for those who have this problem of update failed while trying to update their huawei U8860
it just happend to me as trying to install ICS update
I have the message fread_retry >= SD_FILE_RD_RETRY
I changed of sdcard for another and evrything is fine
the update is applying
RKDB
mac87 said:
for those who have this problem of update failed while trying to update their huawei U8860
it just happend to me as trying to install ICS update
I have the message fread_retry >= SD_FILE_RD_RETRY
I changed of sdcard for another and evrything is fine
the update is applying
Click to expand...
Click to collapse
hello.. but which rom do you have? because i have the problem since i installed the b930 rom and i can't change it even with the pack to downgrade from huawei for b932.. i have always update failed
thanks
RKDB said:
hello.. but which rom do you have? because i have the problem since i installed the b930 rom and i can't change it even with the pack to downgrade from huawei for b932.. i have always update failed
thanks
Click to expand...
Click to collapse
Root using Root_u8800pro

(Q) Footer Is Wrong - Custom Rom Over 4.3 stock?

Hi,
First time Android user and getting to grips with the whole flashing scene.
Have 1905 Factory unlocked model with 4.3 stock.
My network recently launched 4G but only mobiles bought from them directly recieved the OTA update to enable it.
I was getting frustrated with the battery life aswell so I decided to try install a custom rom - namely one of the google edition 4.4.2 ones.
I have the phone rooted,wiped etc but every time I try to install eitheir of the two custom builds I downloaded I get the "footer is wrong" message twice followed by verification failure. I have renamed the build to update.zip.
Am i missing something obvious here? Is it even possible?
Wrong footer
android182 said:
Hi,
First time Android user and getting to grips with the whole flashing scene.
Have 1905 Factory unlocked model with 4.3 stock.
My network recently launched 4G but only mobiles bought from them directly recieved the OTA update to enable it.
I was getting frustrated with the battery life aswell so I decided to try install a custom rom - namely one of the google edition 4.4.2 ones.
I have the phone rooted,wiped etc but every time I try to install eitheir of the two custom builds I downloaded I get the "footer is wrong" message twice followed by verification failure. I have renamed the build to update.zip.
Am i missing something obvious here? Is it even possible?
Click to expand...
Click to collapse
Hello i have the same issue ,have you fix this problem allready .
And how tell me please .

Categories

Resources