Database Users

[GUIDE] adb and fastboot drivers for Windows

If someone has problems installing the official Motorola adb and fastboot drivers for Windows, try the following, this works for me:
1. download the UniversalADB driver from @Koush here: https://github.com/koush/UniversalAdbDriver
2. install it
3. locate the file android_winusb.inf in the folder (may vary) x:\Program Files\ClockworkMod\Universal Adb Driver\usb_driver
4. open it with any texteditor
5. add the following two lines (somewhere in the devices section) and save the file:
Code:
MotorolaADBInterface = USB_Install, USB\VID_22B8&PID_2E76&REV_0228&MI_01
MotorolaBootLoaderInterface = USB_Install, USB\VID_22B8&PID_2E80&REV_0100
6. let Windows install this driver from koush's directory once in adb mode and once in fastboot mode (two drivers!)
7. enjoy!

Work fine thanks

Is the phone recognized by RSD Lite in fastboot mode with these drivers?
I have the Motorola drivers, using Windows 7 SP1 32-bit.
With USB debugging enabled I get a "Mot Composite ADB Interface" device in device manager (Driver Version 2.0.1.0).
The phone can be seen by 'adb devices' and in fastboot by 'fastboot devices' however using RSD lite 6.1.5 no device appears.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

t-bon3 said:
The phone can be seen by 'adb devices' and in fastboot by 'fastboot devices' however using RSD lite 6.1.5 no device appears.
Click to expand...
Click to collapse
Got the same with the universal ADB/fastboot drivers damn.
[edit]
The MotoG PID is missing in PST.ini and/or sdk_common.ini, maybe we have to add it manually or wait for a new RSDlite

hi,
have you some newz about new RSDlite ?(maybe i'm too impatient ... )

Worked great. Thank you

maty3ux said:
hi,
have you some newz about new RSDlite ?(maybe i'm too impatient ... )
Click to expand...
Click to collapse
Not yet, last version is 6.1.6

I do not understand this instruction:
shaftenberg said:
let Windows install this driver from koush's directory
Click to expand...
Click to collapse
Windows doesn't attempt to do anything when I connect the phone in ADB mode. Device Manager lists XT1034 under Other devices and says "The drivers for this device are not installed. (Code 28)". If I do "Update Driver Software" manually and direct it to the "ClockworkMod" directory, Windows says it cannot find driver software for the device. If I right click on the "android_winusb.inf" file and choose Install, Windows says the "file doesn't support this method of installation".

adb devices does't see my moto g
fastboot devices yes, but adb devices only says List of devices attached.
Any help will be appreciated

The latest update of UniversalAdbDriver does not require those lines to be added. Moto G device configuration is added by default
Tested in win7 64bit.

Thank you!!
it works for me
i installed Motorola device manager and this application
reversegear said:
The latest update of UniversalAdbDriver does not require those lines to be added. Moto G device configuration is added by default
Tested in win7 64bit.
Click to expand...
Click to collapse
that's right .. i didn't do that too and it works

I've tried this and when I try to install it, it says "The INF file you selected does not support this method of installation." What do I do?

Didnt work for my moto g
sir, i am really new at this backup thing.
i just want to backup my injustice save game, so that i can restore it to previous point if something goes wrong.
i downloaded latest version on universaladbdriver but still my laptop didnt recognised my MOTO G.
i want to use HELIUM/CARBON for backup and i cant proceed till this problem is removed
please help me, i am new to xda as well.
THANKS
my os is win7 32 bit

hey
same problem i cant install adb or motorola drivers in my pc windows 7 64bit. the links with drives dont work for me..any solution? i want to unlock my bootloaderrrrrrrrrrrr :silly::silly::silly: (when i start to install the adb drivers stuck )
https://www.youtube.com/watch?v=RDA8PpPSFuk here i found solution for me i hope u help guyz(turn the music off )

Gronnd said:
adb devices does't see my moto g
fastboot devices yes, but adb devices only says List of devices attached.
Any help will be appreciated
Click to expand...
Click to collapse
Same problem here how do you solved this issue? wand to flash stock via rsd lite but he doesnt recognize my phone..

nuri-d said:
Same problem here how do you solved this issue? wand to flash stock via rsd lite but he doesnt recognize my phone..
Click to expand...
Click to collapse
To solve this when u are in ADB go in device manager, find ur phone with yellow exclamation mark ( !), right click, insta driver-> manual-> android single sooner ADB interface! It will work like a charm!
Sent from my XT1032 using XDA Free mobile app

I had a similar problem on W7 x64, no driver available for my phone (Moto G LTE, XT1039) even with the Universal ADB driver from CWM and the two lines of the first post added in the INF file.
But, you can notice that all Motorola phones in the android_winusb.inf file refer to the same driver : MotCompositeInterface.
So I went to the Device Manager, found my phone, chose to Update the driver, Find a driver from my computer, Choose from List (sorry if the names are not accurate, my Windows version isn't in English).
Then, you can select ClockworkMod, scroll down to Mot Composite ADB Interface and choose it as your driver.
It worked for me (both in adb and fastboot mode), I was able to unlock my bootloader and flash a recovery using it.
Hope this helps !

Hi, I tried all the solutions in this post unsuccessfully, but I found one here: stackoverflow.com/questions/22217792/android-moto-g-mobile-doesnt-show-in-the-devices-list-of-eclipse
that is the simplest and the only one that worked for me.
Download 'Adb Driver Installer' from here adbdriver.com/downloads/
after this connect your Moto G and start the AdbDriverInstaller.exe it will list your device and then press install.
Click to expand...
Click to collapse

screen deleted on smartwatch h1

After an update the device has lost its laucher (only black screen), I can only access the power off menu and see the system boot.
I can not find anything for this device (rom, tools, tutorials for recovery).
His system is the funOs android 4.4.2
Your configuration:
CPU Model:MTK6572
Screen Size:1.39inch
Battery Capacity:300-450mAh
RAM:512mb
ROM:4GB
Mode:3G
GPS:Yes
Resolution:400*400

I have the same problem after new official update
([email protected])

pe2p2e said:
I have the same problem after new official update
([email protected])
Click to expand...
Click to collapse
I was able to solve the problem in this forum 4pda.ru
I just decided to use the SP Flash Tool v5.1628 and a firmware that I found there.
as this is my first post, I can not leave the link of the files I used

no.1 h1 smartwatch
hi, i have the same problem !, someone has the smartwatch firmware and could explain how to fix it?

I'm posting the link with uscom vcom drivers, spflash tool and already rooted firmware and other skin options.
https: //
drive.google.com/open?id=0BxPeYo6tWjKpWGp6dncyY04tSm8
1: Unzip the file
2: Install USB drives
3: Install the spflash tool
4: Turn off smartwatch
5: Pass the firmware (then turn on the device)
6: ready!
with me it worked and the dials are really cool

GevaFerois said:
I'm posting the link with uscom vcom drivers, spflash tool and already rooted firmware and other skin options.
https: //
drive.google.com/open?id=0BxPeYo6tWjKpWGp6dncyY04tSm8
1: Unzip the file
2: Install USB drives
3: Install the spflash tool
4: Turn off smartwatch
5: Pass the firmware (then turn on the device)
6: ready!
with me it worked and the dials are really cool
Click to expand...
Click to collapse
Thanks in advice but i cannot find USB drivers. When I try to press Download in spflash tool with the smartwatch plugged and switched off it happens nothing, so I think the problem are drivers.

try to press turn on device after pressing download in spflash

GevaFerois said:
try to press turn on device after pressing download in spflash
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried turning on the smartwatch but it does not go anyway, the PC recognizes it but sp flash tool does not load the files:

Alexkungfu said:
I tried turning on the smartwatch but it does not go anyway, the PC recognizes it but sp flash tool does not load the files:
Click to expand...
Click to collapse
follow this video https://www.youtube.com/watch?v=7lSZMQ6zdN0&t=1826s that process is the same

GevaFerois said:
follow this video https://www.youtube.com/watch?v=7lSZMQ6zdN0&t=1826s that process is the same
Click to expand...
Click to collapse
thank you I solved! it was a driver problem, I did not install them because they did not have the certification

hi im using makibes wear HR, mistakenly i have deleted the watch face from fundo wear now my watch is only showing blank screen after booting up only blank screen ...please help im using windows 7
---------- Post added at 02:15 PM ---------- Previous post was at 02:11 PM ----------
Alexkungfu said:
thank you I solved! it was a driver problem, I did not install them because they did not have the certification
Click to expand...
Click to collapse
hi im using makibes wear HR, mistakenly i have deleted the watch face from fundo wear now my watch is only showing blank screen after booting up only blank screen ...please help im using windows 7

aseemhrithik said:
hi im using makibes wear HR, mistakenly i have deleted the watch face from fundo wear now my watch is only showing blank screen after booting up only blank screen ...please help im using windows 7
---------- Post added at 02:15 PM ---------- Previous post was at 02:11 PM ----------
hi im using makibes wear HR, mistakenly i have deleted the watch face from fundo wear now my watch is only showing blank screen after booting up only blank screen ...please help im using windows 7
Click to expand...
Click to collapse
you should find a rom for your smartwatch and apply the same procedure described in the demonstration video posted by GevaFerois

Hi,
Is the GPS working after installation of this firmware ? In my case not and I am wondering what is the reason.

GevaFerois said:
I was able to solve the problem in this forum 4pda.ru
I just decided to use the SP Flash Tool v5.1628 and a firmware that I found there.
as this is my first post, I can not leave the link of the files I used
Click to expand...
Click to collapse
I also have the 'black screen' problem after the latest update.
I do NOT consider rooting & updating the system to a different build a 'solution' for the problem at hand.
Instead it is a totally different direction.
Is there also a true solution to the 'black screen' problem ?
A long press still shows the Boot/Restart & screen options, and the sim-unlock keyboard shows .... but no menus.... nothing

GevaFerois said:
follow this video https://www.youtube.com/watch?v=7lSZMQ6zdN0&t=1826s that process is the same
Click to expand...
Click to collapse
Please notice that the 'original problem' was on a (Hestia/../ZoiyTop JM01/...) H1 smartwatch, which is sufficiently different in my opinion to the Sun D1? shown in the video and reference. I think the 'smartwatch ticks' does a very good job, but may need tweeking for other brands.
Result would be a rooted device with the D1 specific firmware build, and possibly not working with the specific sensors etc in the H1.
4pda.ru indeed has a seemingly nicely running firmware for the H1, and with a selection of watch faces.....
(http://4pda.ru/forum/index.php?showtopic=833918 ) ... but some of the (translated) remarks show confusion/problems also.
I'd be hesitant to use their links, as I think I may misunderstand some of the comments and links.
I think I need to wait for a clearly described (with video?) process towards a running update -for H1-. ... more reading
Both options are -not- an answer to the question on what to do with a -manufacturer- update that leaves the screen dark.......
Any options for that base-problem ? I'm trying to get my (non-rooted, manufacturer updated) watch to get back to a working status for now.
Help please ?

On 4PDA I understood that the 1503978433 a/o 1503979494 parts of the Build 20170829114833 were incorrect or incomplete in that the KCTlauncher fails to start after the latest update.
I have not currently found a solution.
I would like to use the 4PDA custom build, but the process is not sufficiently described for me to understand ..

i've falshed but now the watch can't start. I've tryed to remove battery by cutting red battery wire. When i've reconnected it the watch can't start but if i try to rewrite firmware i can connect to pc but after 20 sec. the program show this error "Brom Error Sft Enable Dram_Fail (4032)"
Have you a solution or test to try for me?
sorry for my bad english.

Thank you! I repaired my watch with your help. I thought that I destroyed my watch completely while trying to find Volume buttons on its motherboard (don’t touch with ground little circle “debug pins” on the right above usb+power cable). But after detaching battery it revived. I did also found power button debug pin under usb+power cable on motherboard. I rooted my watch before updating and PC didn’t find usb watch device after update (device can’t be started error). But it is ok as PC recognizes USB device only while the watch is turning on. Here is the instructions that I used https : // thebroodle.com/microsoft/windows/how-to-install-mtk65xx-preloader-usb-vcom-drivers-in-windows to install drivers on Windows 7. "Brom Error Sft Enable Dram_Fail (4032)" error may be caused by incorrect drivers

"1: Unzip the file
2: Install USB drives
3: Install the spflash tool
4: Turn off smartwatch
5: Pass the firmware (then turn on the device)
6: ready!"
I made this and now watch can't start. Is any solution?

don't panic
go to www[dot]microweartech[dot]com/Firmware[dot]html
download Upgrade Drivers & H1 Flash Tool & H1 firmware
install the drivers
unzip firmware
unzip flash tool
turn off the watch
execute spFlashTool
choose scatter.txt in unzipped driver directory
choose "format + download"
plug watch to usb
press watch button 1 second (usb vcom driver will install)
click download button in spFlashTool
If all is well done, loading is done in 5 minutes
you now have a brand new watch :good:

[HOWTO] Flash a Stock ZUI ROM (ZUK Z2 Pro Z2121 only!)

Flash guide ZUK Z2 Pro - （Z2121）(QPST/QFIL):
-------------
Preamble:
This upgrade your Phone to Z2 Pro_CN_OPEN_USER_Q01002.1_M_ZUI_1.9.038_ST_160503 version, for example. Use the latest version of the software or the version for the actual operation.
Backup your data before processing the flash, in order to avoid loss of data!
-------------
###################
This tutorial is for all editions of ZUK Z2 Pro (Z2121).
USB flashing will wipe your internal phone storage!
Flash at your own risk, and alway follow the flashing turtorial.
Please note this tutorial is different than ZUK Z2 (non Pro) flashing tutorial!
###################
--You'll need a USB-C data-cable to proceed--
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
###################
Theoretical it is possible to recover a bricked Qualcomm Phone, just like ZUK Z2 Pro via this method. If you do this for the first time you'll need to download some tools.
With downloading and installing the tools this procedure will take about 10-30 minutes (differs depending on how powerful your computer is)
Without downloading and installing the tools this procedure will take about 5 minutes.
###################
Let's get startet!
1.0 Download flashtool and ZUK USB driver
Download Flashtool
###REQUIRED### (QPST 2.7.434)
https://www.androidfilehost.com/?fid=24591000424948456
Download USB Drivers
###REQUIRED### (ZUK)
https://www.androidfilehost.com/?fid=24659325368664618
optional (Qualcomm normally installed by QPST flashtool setup)
https://www.androidfilehost.com/?fid=24591020540824824
Download and extract ADB and fastboot
###REQUIRED###
https://www.androidfilehost.com/?fid=24671318762848778
**Attention**
Click to expand...
Click to collapse
If you have Windows 8, 8.1, 10 installed, you have to disable driver verification.
This tutorial was tested by myself on Windows 10 Pro 64 Bit (Build 1607)
Click to expand...
Click to collapse
Download Stock ROM
###REQUIRED###
https://www.androidfilehost.com/?w=files&flid=94059
1.0.1 Unzip the downloaded package
1.0.2 Install QPST.2.7.434.msi
Note: If this screen appears when you double-click on the upgrade tool, you need to download and install the Microsoft .NET Framework 4, you can directly search for and download dotNetFx40_Full_x86.rar
###################
To prevent any further trouble, please reboot your computer now!
###################
1.1.1 Click "QFIL" open the upgrade tool; (path: Start Menu - All Programs - QPST - QFIL)
1.1.2 If you opend QFIL switch to the FireHoseConfiguration and enter the following settings:
After saving the settings, restart QFIL.
1.1.3 Click "Load Content" button, and navigate to the folder you extracted the ROM you downloaded and navigate to the folder with the contents.xml located in, select the contents.xml and click open. This should be looking like this:
The QFIL tool will automaticly load all needed files.
1.1.4 If your phone isn't bricked(Method 1):
Plug in your phone via USB-C cable to your Computer. After this you need to enable developer options. Navigate to Settings - About - ZUI Version and touch it 7 times to enable developer options. After this was successfully navigate to Settings - Advanved Settings - Developer Options - USB debugging and turn it on. Confirm dialog with OK.
Now you only have to navigate to the ADB and fastboot files you extracted and open a command prompt (press and hold "shift" rightclick - select "open command promt windows here")
Type into it: adb reboot edl
---If it fails, turn on "enable_usb_2.0" via Developer Options---
If your phone is bricked (Method 2):
(Turn off your phone.) After it's fully shutdown, press and hold the volume down button and connect your phone to your PC.
Now the QFIL tool should react with the following:
1.1.5 Press the Download Content button to proceed the flashing.
1.1.6 If the flashing procedure was successful, this will be promped
THAT'S IT
1.2.1 Flash finished boot test
After the software upgrade is complete, you should do some test, to confirm whether the software download was successful. Test steps are as follows:
1.2.2. start testing:
After the upgrade the phone should be able to boot.
1.2.3 query software version:
Enter * # * # 5993 # * # * to view the phone software version, phone software version for the software version of the new download.
1.2.4 query the phone number and the IMEI number:
Enter * # * # 2222 # * # * # * 06 # and check the serial number and IMEI number, and backing this time should be consistent.
Last, but not least do OTA updates if available.
###################
Sources:
Original Thread and source: http://club.lenovo.com.cn/thread-1811698-1-1.html
ROM Source: http://club.lenovo.com.cn/thread-1812430-1-1.html
Thread preserved from beeing deleted from zukfans.eu as it will close its doors soon.

does it work with an unlocked rooted zuk z2 pro with rom RRO 6.1.0 ?

Old thread, but I´ll try anyway.... my phone isn´t bricked, but I cannot get into it since my son forgot his screen password... When I turn off the phone, hold vol- and connect the phone, the phone powers into bootloader menu and it is not recognized by QFIL. Any ideas how to solve?

Use this to get your phone into EDL if phone is bricked
My phone was bricked. To get it to connect via the correct port i followed this video tutorial using aluminum foil - and it worked! using ZUK Z2_plus - but it may also work with PRO.
I couldn't get any of the key combos to work - and due to the brick state also couldn't use any of the ADB or fastboot commands.
Connect your phone to your PC in EDL mode:
Youtube Video: v=DexLELi04XY
Title: EDL MODE Lenovo Z2 | Lenovo z2132
(sorry, can't post link)

Hello, I'm trying to flash a rom on my Zuk Z2 Pro but it doesn't work.
At the 1.1.4 step (method 2) I just have "No port available" on QFIL, I don't know why.
Can anybody help me pls ?

[Guide] Fix for device not working in fastboot / unable to install official driver in Windows 10 / 11

If you are getting the error as in the screenshot below, this solution is for you.
1. Download the attachment "Generic Driver.zip" and extract it
2. Click on "Update Driver" in the dialog in the screenshot.
3. Browse my computer for drivers
4. Let me pick from the list of available drivers
5. Show all devices
6. Have Disk
7. Point it to the extracted folder and click OK.
8. You will see 3 new items in the box now Choose "Android bootloader interface" in the list and click next
9. It will show you a warning. Ignore it and press Yes
That's all! Enjoy
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Oneplus USB drivers were not enough on my win11 pc but your method worked, thanks very much

Hi,
I am facing the same issue, after updating to windows 11 my one plus 7T driver stopped working...i tried all the possible solutions I the forums, from updating driver of Generic driver, Qualcomm drivers, and USB driver...nothing has worked...in fact I saw many members posting to update the android driver in device manager in the other devices tab which solves the issue...many have an android option but on my device there isn't any android option..i don't know what to do..I'm very frustrated and tensed as to what needs to be done...please if any on can help me personally it wud be really great.

anuahmed89 said:
Hi,
I am facing the same issue, after updating to windows 11 my one plus 7T driver stopped working...i tried all the possible solutions I the forums, from updating driver of Generic driver, Qualcomm drivers, and USB driver...nothing has worked...in fact I saw many members posting to update the android driver in device manager in the other devices tab which solves the issue...many have an android option but on my device there isn't any android option..i don't know what to do..I'm very frustrated and tensed as to what needs to be done...please if any on can help me personally it wud be really great.
Click to expand...
Click to collapse
[Guide] Fix Device Not Showing Up In Fastboot Mode (Windows 10/11)
You sir are saint...I've been trying to get fastboot to recognize my OP6T for the last 8 hours. Thank you so much!
forum.xda-developers.com

in my case, the other devices it doesnt show when i connect it with usb and it also doesnt show USB CONNECTED notification on my status bar? it would be really helpful if someone can help with the fix, Thankks and Appreciated.

I just went through the same exercise. However, I did not want to download drivers from unknown source (or even worse - run some *magical* driver fixing executable), right?
I am using Samsung Galaxy Tab A7 Lite and the ADB drivers came from Samsung and adb was working.
However, once I put the tablet in fastboot mode the USB re-enumerated and Samsung drivers didn't cut it!
Inspecting DeviceManager gave me the USB\VID_18D1&PID_4EE0 and Google search shows this is actually a Google VID. The rest is history: Downloaded (signed!) driver from Google (specifically this) and voila - life is good!
I hope this may help others avoiding wizardry with unsigned drivers.

I didn't think I'd get to ask something like this but here I am:
I can't get the phone to be detected while it is bootloader mode to my PC. I always updated and rooted my phone without any issue but with f.15 I can't.
All drivers are fine because I've rooted f.13 like one month ago so i really don't know what to do.
I remember once I had to install "Android Bootloader Interface" but now when I'm in bootloader mode my PC doesn't see the phone. No "unknown android" under window devices manager, nothing.
When the phone is ON I see "ADB Interface" in devices manager, when it's OFF nothing shows up in the list like the PC doesn't see I've plugged my phone.
What am I missing?
Thx in advance

Dieppy said:
I didn't think I'd get to ask something like this but here I am:
I can't get the phone to be detected while it is bootloader mode to my PC. I always updated and rooted my phone without any issue but with f.15 I can't.
All drivers are fine because I've rooted f.13 like one month ago so i really don't know what to do.
I remember once I had to install "Android Bootloader Interface" but now when I'm in bootloader mode my PC doesn't see the phone. No "unknown android" under window devices manager, nothing.
When the phone is ON I see "ADB Interface" in devices manager, when it's OFF nothing shows up in the list like the PC doesn't see I've plugged my phone.
What am I missing?
Thx in advance
Click to expand...
Click to collapse
Not sure if this will help but I would run "usbview" to see what is enumerated. Since the tree is very bid these days with many hubs and USB devices already connected you might first plug-in anything known to the same USB port to see where on the tree it sits. Then plug-in the phone and look at the same spot ("bark at the same tree" ;-) )
If you nave a NIX system "lsusb" will do you similar service. Both are driver independent. Then (if the phone is recognized) get the VID and PID and google what got enumerated and you may end-up with the right driver.
In the case nothing is detected at this low level the only explanation I would have is that the boot doesn't initialize the USB interface on the phone. That would be weird and nasty.

Hey
While trying to install drivers using have disk I encounter a problem. After navigating to the android-usb.inf file I press ok and it rolls back to asking me where is the disk. I tried disabling driver enforcement but to didn't work. It's like windows doesn't want to work. I am using a win 11 copy via parallels on an M1 Mac.

How To Guide [Guide] Make Cisco-Linksys USB200M Ethernet Adapter work in Windows 10

Compact USB 2.0 10/100 Network Adapter Windows 10/11​
Foreword​I recently found this compact network adapter lying around somewhere. It's an older network adapter for sure (100mbp/s max), but why throw it away instead of using it? There is just one mayor catch: it won't work in Windows 10 natively. (Download link at the end of article)
How to make it work in Windows 10 (guide)​Since Linksys didn't update the driver to 64bit, it doesn't match to a modern OS like Windows 10 or 11 (latest driver for Windows Vista 32-bit, Windows 10 32-bit doesn't work as well). Windows doesn't run 32-bit drivers on 64-bit operating systems. So instead of downloading the device driver (Linksys USB200M), I searched the internet finding out, which Ethernet controller is used. It turns out that it is a AX88772A controller. On the manufacture site of the AX88772A there is a driver available to download. Once you downloaded (unzip first), head to the device manager. Find the unknown device, right-click and select update driver.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Select Browse my computer for drivers. Then choose Let me pick from a list of available drivers on my computer.
Search for Network adapters (tip: press "n" to jump to letter first n record). Open it. Now, instead of searching manufacturer (it wont work), simply choose Have Disk.
Now browse your downloaded driver folder and find a .inf file. Search for a entry called AX88772A. It might work with the non-A variant, but I selected this one.
Click next and accept the warning. The driver will be installed and you'll receive a success message.
After a optional reboot (I would recommend), the network adapter is ready to go.
A device named ASIX AX88772A Fast Ethernet Adapter appears in device manager under Network adapters:
Download link​----------------------------------------------------------------
>>AX88772A information page<<
>>Windows 10 (64-bit) AX88772A driver download<<
>>Windows 10 (32-bit) AX88772A driver download<<
----------------------------------------------------------------
I hope this helped!

I just found my old adapter, too. Which version are you using (mine is USB200M ver. 2.1)? I can't seem to get it to work. Windows is telling me that there are no compatible drivers for my device even after selecting the correct folder.

nm3th said:
I just found my old adapter, too. Which version are you using (mine is USB200M ver. 2.1)? I can't seem to get it to work. Windows is telling me that there are no compatible drivers for my device even after selecting the correct folder.
Click to expand...
Click to collapse
It turned out that my guide was incomplete. Let me know if it worked. Thanks for your hint & have a nice day!

doxtsgaming said:
It turned out that my guide was incomplete. Let me know if it worked. Thanks for your hint & have a nice day!
Click to expand...
Click to collapse
I finally got some time to take another shot at this and your updated guide works great. Thanks a lot for putting this together.

Thank you very much. Helped a lot.

OKN_ said:
Thank you very much. Helped a lot.
Click to expand...
Click to collapse
I'm glad it helped

doxts said:
Compact USB 2.0 10/100 Network Adapter Windows 10/11​
Foreword​I recently found this compact network adapter lying around somewhere. It's an older network adapter for sure (100mbp/s max), but why throw it away instead of using it? There is just one mayor catch: it wont work in Windows 10 natively. (Download link at the end of article)
How to make it work in Windows 10 (guide)​Since Linksys didn't update the driver to 64bit, it doesn't match to a modern OS like Windows 10 or 11 (latest driver for Windows Vista 32-bit, Windows 10 32-bit doesn't work as well). Windows doesn't run 32-bit drivers on 64-bit operating systems. So instead of downloading the device driver (Linksys USB200M), I searched the internet finding out, which Ethernet controller is used. It turns out that it is a AX88772A controller. On the manufacture site of the AX88772A there is a driver available to download. Once you downloaded (unzip first), head to the device manager. Find the unknown device, right-click and select update driver.
View attachment 5670405
Select Browse my computer for drivers. Then choose Let me pick from a list of available drivers on my computer.
View attachment 5670411
Search for Network adapters (tip: press "n" to jump to letter first n record). Open it. Now, instead of searching manufacturer (it wont work), simply choose Have Disk.
View attachment 5670417
Now browse your downloaded driver folder and find a .inf file. You can choose the first listed device as there are many others of the same type. Click next and accept the warning. The driver will be installed and you'll receive a success message.
View attachment 5670431
After a optional reboot (I would recommend), the network adapter is ready to go.
A device named ASIX AX88772A Fast Ethernet Adapter appears in device manager under Network adapters:
View attachment 5670385
Download link​----------------------------------------------------------------
>>AX88772A information page<<
>>Windows 10 (64-bit) AX88772A driver download<<
>>Windows 10 (32-bit) AX88772A driver download<<
----------------------------------------------------------------
I hope this helped!
Changes made
- 07/25/2022 misspelling corrected
- 07/28/2022 added screenshots modified text
- 02/23/2023 misspelling corrected
Click to expand...
Click to collapse
When I try to update the driver as instructed I get "Windows found drivers for your device but encountered an error while attempting to install them." followed by the name of the drive (same as your screenshot) and then, "This device cannot start. (Code 10)." Any suggestions or am I SOL?

LinusMandel said:
When I try to update the driver as instructed I get "Windows found drivers for your device but encountered an error while attempting to install them." followed by the name of the drive (same as your screenshot) and then, "This device cannot start. (Code 10)." Any suggestions or am I SOL?
Click to expand...
Click to collapse
Hi @LinusMandel
Have you selected the A variant of the driver (ASIX AX88772A)? That may have caused the error.